LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>,
	npiggin@gmail.com
Cc: linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH v3 25/41] powerpc/32: Don't save thread.regs on interrupt entry
Date: Fri, 12 Mar 2021 12:50:35 +0000 (UTC)	[thread overview]
Message-ID: <20d52c627303d63e461797df13e6890fc04017d0.1615552867.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1615552866.git.christophe.leroy@csgroup.eu>

Since commit 06d67d54741a ("powerpc: make process.c suitable for both
32-bit and 64-bit"), thread.regs is set on task creation, no need to
set it again and again at each interrupt entry as it never change.

Suggested-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/kernel/entry_32.S | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 79311d0bd09b..1e201fc4a590 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -97,10 +97,8 @@ transfer_to_handler:
 	stw	r2,_XER(r11)
 	mfspr	r12,SPRN_SPRG_THREAD
 	tovirt(r12, r12)
-	beq	2f			/* if from user, fix up THREAD.regs */
+	beq	2f
 	addi	r2, r12, -THREAD
-	addi	r11,r1,STACK_FRAME_OVERHEAD
-	stw	r11,PT_REGS(r12)
 #ifdef CONFIG_PPC_BOOK3S_32
 	kuep_lock r11, r12
 #endif
@@ -147,7 +145,6 @@ transfer_to_syscall:
 	/* Calling convention has r9 = orig r0, r10 = regs */
 	addi	r10,r1,STACK_FRAME_OVERHEAD
 	mr	r9,r0
-	stw	r10,THREAD+PT_REGS(r2)
 	bl	system_call_exception
 
 ret_from_syscall:
-- 
2.25.0


  parent reply	other threads:[~2021-03-12 12:51 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-12 12:50 [PATCH v3 00/41] powerpc/32: Switch to interrupt entry/exit in C Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 01/41] powerpc/traps: Declare unrecoverable_exception() as __noreturn Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 02/41] powerpc/40x: Don't use SPRN_SPRG_SCRATCH0/1 in TLB miss handlers Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 03/41] powerpc/40x: Change CRITICAL_EXCEPTION_PROLOG macro to a gas macro Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 04/41] powerpc/40x: Save SRR0/SRR1 and r10/r11 earlier in critical exception Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 05/41] powerpc/40x: Reorder a few instructions in critical exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 06/41] powerpc/40x: Prepare for enabling MMU " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 07/41] powerpc/40x: Prepare normal exception handler for enabling MMU early Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 08/41] powerpc/32: Reconcile interrupts in C Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 09/41] powerpc/32: Entry cpu time accounting " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 10/41] powerpc/32: Handle bookE debugging in C in exception entry Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 11/41] powerpc/32: Use fast instruction to set MSR RI in exception prolog on 8xx Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 12/41] powerpc/32: Remove ksp_limit Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 13/41] powerpc/32: Always enable data translation in exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 14/41] powerpc/32: Tag DAR in EXCEPTION_PROLOG_2 for the 8xx Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 15/41] powerpc/32: Enable instruction translation at the same time as data translation Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 16/41] powerpc/32: Statically initialise first emergency context Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 17/41] powerpc/32: Add vmap_stack_overflow label inside the macro Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 18/41] powerpc/32: Use START_EXCEPTION() as much as possible Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 19/41] powerpc/32: Move exception prolog code into .text once MMU is back on Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 20/41] powerpc/32: Provide a name to exception prolog continuation in virtual mode Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 21/41] powerpc/32: Refactor booke critical registers saving Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 22/41] powerpc/32: Perform normal function call in exception entry Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 23/41] powerpc/32: Always save non volatile registers on " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 24/41] powerpc/32: Replace ASM exception exit by C exception exit from ppc64 Christophe Leroy
2021-03-12 12:50 ` Christophe Leroy [this message]
2021-03-12 12:50 ` [PATCH v3 26/41] powerpc/32: Set regs parameter in r3 in transfer_to_handler Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 27/41] powerpc/32: Call bad_page_fault() from do_page_fault() Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 28/41] powerpc/32: Save trap number on stack in exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 29/41] powerpc/32: Add a prepare_transfer_to_handler macro for exception prologs Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 30/41] powerpc/32: Only restore non volatile registers when required Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 31/41] powerpc/32: Dismantle EXC_XFER_STD/LITE/TEMPLATE Christophe Leroy
2021-07-31 10:12   ` Finn Thain
2021-07-31 15:39     ` Christophe Leroy
2021-08-01  1:21       ` Finn Thain
     [not found]         ` <34e52975-4ab9-4eb4-3501-02376e38a27c@yahoo.com>
2021-08-01 23:48           ` Finn Thain
2021-08-02 15:19         ` LEROY Christophe
2021-08-03  0:43           ` Finn Thain
     [not found]           ` <62d36dbb-4b39-f5bd-7962-4dcfbea729b3@linux-m68k.org>
     [not found]             ` <683c8156-97b0-5ba7-ce31-2e8613089836@yahoo.com>
2021-08-04  4:57               ` Finn Thain
2021-07-31 16:40     ` Christophe Leroy
2021-08-01  1:39       ` Finn Thain
2021-03-12 12:50 ` [PATCH v3 32/41] powerpc/32: Remove the xfer parameter in EXCEPTION() macro Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 33/41] powerpc/32: Refactor saving of volatile registers in exception prologs Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 34/41] powerpc/32: Save remaining registers in exception prolog Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 35/41] powerpc/32: Return directly from power_save_ppc32_restore() Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 36/41] powerpc/32: Only use prepare_transfer_to_handler function on book3s/32 and e500 Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 37/41] powerpc/32s: Move KUEP locking/unlocking in C Christophe Leroy
2021-03-27 17:24   ` Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 38/41] powerpc/64s: Make kuap_check_amr() and kuap_get_and_check_amr() generic Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 39/41] powerpc/32s: Create C version of kuap save/restore/check helpers Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 40/41] powerpc/8xx: " Christophe Leroy
2021-03-12 12:50 ` [PATCH v3 41/41] powerpc/32: Manage KUAP in C Christophe Leroy
2021-03-31  1:09 ` [PATCH v3 00/41] powerpc/32: Switch to interrupt entry/exit " Michael Ellerman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20d52c627303d63e461797df13e6890fc04017d0.1615552867.git.christophe.leroy@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=npiggin@gmail.com \
    --cc=paulus@samba.org \
    --subject='Re: [PATCH v3 25/41] powerpc/32: Don'\''t save thread.regs on interrupt entry' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).