LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Robin Murphy <robin.murphy@arm.com> To: joro@8bytes.org, will@kernel.org Cc: iommu@lists.linux-foundation.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, suravee.suthikulpanit@amd.com, baolu.lu@linux.intel.com, john.garry@huawei.com, dianders@chromium.org, rajatja@google.com, chenxiang66@hisilicon.com, Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Subject: [PATCH v3 25/25] iommu: Allow enabling non-strict mode dynamically Date: Wed, 4 Aug 2021 18:15:53 +0100 [thread overview] Message-ID: <22b044263f69e2bfe404c4379a435005ea58b3e2.1628094601.git.robin.murphy@arm.com> (raw) In-Reply-To: <cover.1628094600.git.robin.murphy@arm.com> Allocating and enabling a flush queue is in fact something we can reasonably do while a DMA domain is active, without having to rebuild it from scratch. Thus we can allow a strict -> non-strict transition from sysfs without requiring to unbind the device's driver, which is of particular interest to users who want to make selective relaxations to critical devices like the one serving their root filesystem. Disabling and draining a queue also seems technically possible to achieve without rebuilding the whole domain, but would certainly be more involved. Furthermore there's not such a clear use-case for tightening up security *after* the device may already have done whatever it is that you don't trust it not to do, so we only consider the relaxation case. CC: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> --- v3: Actually think about concurrency, rework most of the fq data accesses to be (hopefully) safe and comment it all --- drivers/iommu/dma-iommu.c | 25 ++++++++++++++++++------- drivers/iommu/iommu.c | 16 ++++++++++++---- drivers/iommu/iova.c | 9 ++++++--- 3 files changed, 36 insertions(+), 14 deletions(-) diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c index f51b8dc99ac6..6b04dc765d91 100644 --- a/drivers/iommu/dma-iommu.c +++ b/drivers/iommu/dma-iommu.c @@ -310,6 +310,12 @@ static bool dev_is_untrusted(struct device *dev) return dev_is_pci(dev) && to_pci_dev(dev)->untrusted; } +/* + * Protected from concurrent sysfs updates by the mutex of the group who owns + * this domain. At worst it might theoretically be able to allocate two queues + * and leak one if you poke sysfs to race just right with iommu_setup_dma_ops() + * running for the first device in the group. Don't do that. + */ int iommu_dma_init_fq(struct iommu_domain *domain) { struct iommu_dma_cookie *cookie = domain->iova_cookie; @@ -325,7 +331,12 @@ int iommu_dma_init_fq(struct iommu_domain *domain) domain->type = IOMMU_DOMAIN_DMA; return -ENODEV; } - cookie->fq_domain = domain; + /* + * Prevent incomplete iovad->fq being observable. Pairs with path from + * __iommu_dma_unmap() through iommu_dma_free_iova() to queue_iova() + */ + smp_wmb(); + WRITE_ONCE(cookie->fq_domain, domain); return 0; } @@ -456,17 +467,17 @@ static dma_addr_t iommu_dma_alloc_iova(struct iommu_domain *domain, } static void iommu_dma_free_iova(struct iommu_dma_cookie *cookie, - dma_addr_t iova, size_t size, struct page *freelist) + dma_addr_t iova, size_t size, struct iommu_iotlb_gather *gather) { struct iova_domain *iovad = &cookie->iovad; /* The MSI case is only ever cleaning up its most recent allocation */ if (cookie->type == IOMMU_DMA_MSI_COOKIE) cookie->msi_iova -= size; - else if (cookie->fq_domain) /* non-strict mode */ + else if (gather && gather->queued) queue_iova(iovad, iova_pfn(iovad, iova), size >> iova_shift(iovad), - (unsigned long)freelist); + (unsigned long)gather->freelist); else free_iova_fast(iovad, iova_pfn(iovad, iova), size >> iova_shift(iovad)); @@ -485,14 +496,14 @@ static void __iommu_dma_unmap(struct device *dev, dma_addr_t dma_addr, dma_addr -= iova_off; size = iova_align(iovad, size + iova_off); iommu_iotlb_gather_init(&iotlb_gather); - iotlb_gather.queued = cookie->fq_domain; + iotlb_gather.queued = READ_ONCE(cookie->fq_domain); unmapped = iommu_unmap_fast(domain, dma_addr, size, &iotlb_gather); WARN_ON(unmapped != size); - if (!cookie->fq_domain) + if (!iotlb_gather.queued) iommu_iotlb_sync(domain, &iotlb_gather); - iommu_dma_free_iova(cookie, dma_addr, size, iotlb_gather.freelist); + iommu_dma_free_iova(cookie, dma_addr, size, &iotlb_gather); } static void __iommu_dma_unmap_swiotlb(struct device *dev, dma_addr_t dma_addr, diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 480ad6a538a9..593d4555bc57 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -3203,6 +3203,13 @@ static int iommu_change_dev_def_domain(struct iommu_group *group, goto out; } + /* We can bring up a flush queue without tearing down the domain */ + if (type == IOMMU_DOMAIN_DMA_FQ && prev_dom->type == IOMMU_DOMAIN_DMA) { + prev_dom->type = IOMMU_DOMAIN_DMA_FQ; + ret = iommu_dma_init_fq(prev_dom); + goto out; + } + /* Sets group->default_domain to the newly allocated domain */ ret = iommu_group_alloc_default_domain(dev->bus, group, type); if (ret) @@ -3243,9 +3250,9 @@ static int iommu_change_dev_def_domain(struct iommu_group *group, } /* - * Changing the default domain through sysfs requires the users to ubind the - * drivers from the devices in the iommu group. Return failure if this doesn't - * meet. + * Changing the default domain through sysfs requires the users to unbind the + * drivers from the devices in the iommu group, except for a DMA -> DMA-FQ + * transition. Return failure if this isn't met. * * We need to consider the race between this and the device release path. * device_lock(dev) is used here to guarantee that the device release path @@ -3321,7 +3328,8 @@ static ssize_t iommu_group_store_type(struct iommu_group *group, /* Check if the device in the group still has a driver bound to it */ device_lock(dev); - if (device_is_bound(dev)) { + if (device_is_bound(dev) && !(req_type == IOMMU_DOMAIN_DMA_FQ && + group->default_domain->type == IOMMU_DOMAIN_DMA)) { pr_err_ratelimited("Device is still bound to driver\n"); ret = -EBUSY; goto out; diff --git a/drivers/iommu/iova.c b/drivers/iommu/iova.c index 2ad73fb2e94e..547b6243de9b 100644 --- a/drivers/iommu/iova.c +++ b/drivers/iommu/iova.c @@ -633,17 +633,20 @@ void queue_iova(struct iova_domain *iovad, unsigned long pfn, unsigned long pages, unsigned long data) { - struct iova_fq *fq = raw_cpu_ptr(iovad->fq); + struct iova_fq *fq; unsigned long flags; unsigned idx; /* * Order against the IOMMU driver's pagetable update from unmapping * @pte, to guarantee that iova_domain_flush() observes that if called - * from a different CPU before we release the lock below. + * from a different CPU before we release the lock below. Full barrier + * so it also pairs with iommu_dma_init_fq() to avoid seeing partially + * written fq state here. */ - smp_wmb(); + smp_mb(); + fq = raw_cpu_ptr(iovad->fq); spin_lock_irqsave(&fq->lock, flags); /* -- 2.25.1
next prev parent reply other threads:[~2021-08-04 17:17 UTC|newest] Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-08-04 17:15 [PATCH v3 00/25] iommu: Refactor DMA domain strictness Robin Murphy 2021-08-04 17:15 ` [PATCH v3 01/25] iommu: Pull IOVA cookie management into the core Robin Murphy 2021-08-04 18:52 ` Heiko Stübner 2021-08-05 7:18 ` Marek Szyprowski 2021-08-05 9:15 ` Yoshihiro Shimoda 2021-08-04 17:15 ` [PATCH v3 02/25] iommu/amd: Drop IOVA cookie management Robin Murphy 2021-08-05 7:37 ` kernel test robot 2021-08-05 9:37 ` Robin Murphy 2021-08-04 17:15 ` [PATCH v3 03/25] iommu/arm-smmu: " Robin Murphy 2021-08-04 17:15 ` [PATCH v3 04/25] iommu/vt-d: " Robin Murphy 2021-08-04 17:15 ` [PATCH v3 05/25] iommu/exynos: " Robin Murphy 2021-08-05 7:19 ` Marek Szyprowski 2021-08-04 17:15 ` [PATCH v3 06/25] iommu/ipmmu-vmsa: " Robin Murphy 2021-08-05 9:15 ` Yoshihiro Shimoda 2021-08-04 17:15 ` [PATCH v3 07/25] iommu/mtk: " Robin Murphy 2021-08-04 17:15 ` [PATCH v3 08/25] iommu/rockchip: " Robin Murphy 2021-08-04 18:53 ` Heiko Stübner 2021-08-04 17:15 ` [PATCH v3 09/25] iommu/sprd: " Robin Murphy 2021-08-06 2:15 ` Chunyan Zhang 2021-08-04 17:15 ` [PATCH v3 10/25] iommu/sun50i: " Robin Murphy 2021-08-04 17:15 ` [PATCH v3 11/25] iommu/virtio: " Robin Murphy 2021-08-04 17:15 ` [PATCH v3 12/25] iommu/dma: Unexport " Robin Murphy 2021-08-04 17:15 ` [PATCH v3 13/25] iommu/dma: Remove redundant "!dev" checks Robin Murphy 2021-08-04 17:15 ` [PATCH v3 14/25] iommu: Indicate queued flushes via gather data Robin Murphy 2021-08-04 17:15 ` [PATCH v3 15/25] iommu/io-pgtable: Remove non-strict quirk Robin Murphy 2021-08-04 17:15 ` [PATCH v3 16/25] iommu: Introduce explicit type for non-strict DMA domains Robin Murphy 2021-08-04 17:15 ` [PATCH v3 17/25] iommu/amd: Prepare for multiple DMA domain types Robin Murphy 2021-08-04 17:15 ` [PATCH v3 18/25] iommu/arm-smmu: " Robin Murphy 2021-08-04 17:15 ` [PATCH v3 19/25] iommu/vt-d: " Robin Murphy 2021-08-04 17:15 ` [PATCH v3 20/25] iommu: Express DMA strictness via the domain type Robin Murphy 2021-08-04 17:15 ` [PATCH v3 21/25] iommu: Expose DMA domain strictness via sysfs Robin Murphy 2021-08-04 17:15 ` [PATCH v3 22/25] iommu: Only log strictness for DMA domains Robin Murphy 2021-08-04 17:15 ` [PATCH v3 23/25] iommu: Merge strictness and domain type configs Robin Murphy 2021-08-06 9:15 ` John Garry 2021-08-04 17:15 ` [PATCH v3 24/25] iommu/dma: Factor out flush queue init Robin Murphy 2021-08-09 12:52 ` Will Deacon 2021-08-09 14:47 ` Robin Murphy 2021-08-09 19:05 ` Rajat Jain 2021-08-09 19:59 ` Robin Murphy 2021-08-09 20:15 ` Rajat Jain 2021-08-04 17:15 ` Robin Murphy [this message] 2021-08-09 12:49 ` [PATCH v3 25/25] iommu: Allow enabling non-strict mode dynamically Will Deacon 2021-08-09 13:40 ` Robin Murphy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=22b044263f69e2bfe404c4379a435005ea58b3e2.1628094601.git.robin.murphy@arm.com \ --to=robin.murphy@arm.com \ --cc=baolu.lu@linux.intel.com \ --cc=chenxiang66@hisilicon.com \ --cc=dianders@chromium.org \ --cc=iommu@lists.linux-foundation.org \ --cc=john.garry@huawei.com \ --cc=joro@8bytes.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=rajatja@google.com \ --cc=sai.praneeth.prakhya@intel.com \ --cc=suravee.suthikulpanit@amd.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).