LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Rob Herring <robh@kernel.org>, Roger Quadros <rogerq@ti.com>
Cc: <t-kristo@ti.com>, <nm@ti.com>, <nsekhar@ti.com>,
	<vigneshr@ti.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 3/6] arm64: dts: ti: k3-j721e-main: Add serdes_ln_ctrl node to select SERDES lane mux
Date: Thu, 19 Mar 2020 17:07:14 +0530	[thread overview]
Message-ID: <247a115e-6b44-2906-07cf-771236d492d6@ti.com> (raw)
In-Reply-To: <20200310210904.GA11275@bogus>

Hi Rob,

On 11/03/20 2:39 am, Rob Herring wrote:
> On Tue, Mar 03, 2020 at 12:17:19PM +0200, Roger Quadros wrote:
>> From: Kishon Vijay Abraham I <kishon@ti.com>
>>
>> Add serdes_ln_ctrl node used for selecting SERDES lane mux.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
>> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
>> Signed-off-by: Roger Quadros <rogerq@ti.com>
>> ---
>>  arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 27 ++++++++++++
>>  include/dt-bindings/mux/mux-j721e-wiz.h   | 53 +++++++++++++++++++++++
>>  2 files changed, 80 insertions(+)
>>  create mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>> index cbaadee5bfdc..c5d54af37e91 100644
>> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>> @@ -5,6 +5,8 @@
>>   * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
>>   */
>>  #include <dt-bindings/phy/phy.h>
>> +#include <dt-bindings/mux/mux.h>
>> +#include <dt-bindings/mux/mux-j721e-wiz.h>
>>  
>>  &cbass_main {
>>  	msmc_ram: sram@70000000 {
>> @@ -19,6 +21,31 @@
>>  		};
>>  	};
>>  
>> +	scm_conf: scm-conf@100000 {
>> +		compatible = "syscon", "simple-mfd", "ti,j721e-system-controller";
> 
> Wrong ordering. Most significant first.
> 
>> +		reg = <0 0x00100000 0 0x1c000>;
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges = <0x0 0x0 0x00100000 0x1c000>;
>> +
>> +		serdes_ln_ctrl: serdes-ln-ctrl@4080 {
> 
> Your syscon.yaml change is not valid if you have child nodes. Do a 
> specific binding for this block.

Do you mean in addition to having platform specific binding for
scm-conf, I need to have platform specific binding for serdes-ln-ctrl.

Since the driver doesn't do any platform specific stuff, the driver
doesn't have to change. Is that correct?

Thanks
Kishon
> 
>> +			compatible = "mmio-mux";
>> +			reg = <0x00004080 0x50>;
>> +			#mux-control-cells = <1>;
>> +			mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */
>> +					<0x4090 0x3>, <0x4094 0x3>, /* SERDES1 lane0/1 select */
>> +					<0x40a0 0x3>, <0x40a4 0x3>, /* SERDES2 lane0/1 select */
>> +					<0x40b0 0x3>, <0x40b4 0x3>, /* SERDES3 lane0/1 select */
>> +					<0x40c0 0x3>, <0x40c4 0x3>, <0x40c8 0x3>, <0x40cc 0x3>;
>> +					/* SERDES4 lane0/1/2/3 select */
>> +			idle-states = <SERDES0_LANE0_PCIE0_LANE0>, <SERDES0_LANE1_PCIE0_LANE1>,
>> +				      <SERDES1_LANE0_PCIE1_LANE0>, <SERDES1_LANE1_PCIE1_LANE1>,
>> +				      <SERDES2_LANE0_PCIE2_LANE0>, <SERDES2_LANE1_PCIE2_LANE1>,
>> +				      <MUX_IDLE_AS_IS>, <SERDES3_LANE1_USB3_0>,
>> +				      <SERDES4_LANE0_EDP_LANE0>, <SERDES4_LANE1_EDP_LANE1>, <SERDES4_LANE2_EDP_LANE2>, <SERDES4_LANE3_EDP_LANE3>;
>> +		};
>> +	};
>> +
>>  	gic500: interrupt-controller@1800000 {
>>  		compatible = "arm,gic-v3";
>>  		#address-cells = <2>;
>> diff --git a/include/dt-bindings/mux/mux-j721e-wiz.h b/include/dt-bindings/mux/mux-j721e-wiz.h
>> new file mode 100644
>> index 000000000000..fd1c4ea9fc7f
>> --- /dev/null
>> +++ b/include/dt-bindings/mux/mux-j721e-wiz.h
>> @@ -0,0 +1,53 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * This header provides constants for J721E WIZ.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_J721E_WIZ
>> +#define _DT_BINDINGS_J721E_WIZ
>> +
>> +#define SERDES0_LANE0_QSGMII_LANE1	0x0
>> +#define SERDES0_LANE0_PCIE0_LANE0	0x1
>> +#define SERDES0_LANE0_USB3_0_SWAP	0x2
>> +
>> +#define SERDES0_LANE1_QSGMII_LANE2	0x0
>> +#define SERDES0_LANE1_PCIE0_LANE1	0x1
>> +#define SERDES0_LANE1_USB3_0		0x2
>> +
>> +#define SERDES1_LANE0_QSGMII_LANE3	0x0
>> +#define SERDES1_LANE0_PCIE1_LANE0	0x1
>> +#define SERDES1_LANE0_USB3_1_SWAP	0x2
>> +#define SERDES1_LANE0_SGMII_LANE0	0x3
>> +
>> +#define SERDES1_LANE1_QSGMII_LANE4	0x0
>> +#define SERDES1_LANE1_PCIE1_LANE1	0x1
>> +#define SERDES1_LANE1_USB3_1		0x2
>> +#define SERDES1_LANE1_SGMII_LANE1	0x3
>> +
>> +#define SERDES2_LANE0_PCIE2_LANE0	0x1
>> +#define SERDES2_LANE0_SGMII_LANE0	0x3
>> +#define SERDES2_LANE0_USB3_1_SWAP	0x2
>> +
>> +#define SERDES2_LANE1_PCIE2_LANE1	0x1
>> +#define SERDES2_LANE1_USB3_1		0x2
>> +#define SERDES2_LANE1_SGMII_LANE1	0x3
>> +
>> +#define SERDES3_LANE0_PCIE3_LANE0	0x1
>> +#define SERDES3_LANE0_USB3_0_SWAP	0x2
>> +
>> +#define SERDES3_LANE1_PCIE3_LANE1	0x1
>> +#define SERDES3_LANE1_USB3_0		0x2
>> +
>> +#define SERDES4_LANE0_EDP_LANE0		0x0
>> +#define SERDES4_LANE0_QSGMII_LANE5	0x2
>> +
>> +#define SERDES4_LANE1_EDP_LANE1		0x0
>> +#define SERDES4_LANE1_QSGMII_LANE6	0x2
>> +
>> +#define SERDES4_LANE2_EDP_LANE2		0x0
>> +#define SERDES4_LANE2_QSGMII_LANE7	0x2
>> +
>> +#define SERDES4_LANE3_EDP_LANE3		0x0
>> +#define SERDES4_LANE3_QSGMII_LANE8	0x2
>> +
>> +#endif /* _DT_BINDINGS_J721E_WIZ */
>> -- 
>> Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>> Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
>>

  reply	other threads:[~2020-03-19 11:32 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-03 10:17 [PATCH v2 0/6] arm64: ti: k3-j721e: Add SERDES PHY and USB3.0 support Roger Quadros
2020-03-03 10:17 ` [PATCH v2 1/6] dt-bindings: syscon: Add TI's J721E specific compatible string Roger Quadros
2020-03-03 10:17 ` [PATCH v2 2/6] arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes Roger Quadros
2020-03-03 10:17 ` [PATCH v2 3/6] arm64: dts: ti: k3-j721e-main: Add serdes_ln_ctrl node to select SERDES lane mux Roger Quadros
2020-03-10 21:09   ` Rob Herring
2020-03-19 11:37     ` Kishon Vijay Abraham I [this message]
2020-04-23  7:03       ` Roger Quadros
2020-04-24 20:15       ` Rob Herring
2020-03-03 10:17 ` [PATCH v2 4/6] arm64: dts: ti: k3-j721e-main.dtsi: Add USB to SERDES MUX Roger Quadros
2020-03-03 10:17 ` [PATCH v2 5/6] arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0 Roger Quadros
2020-03-03 10:17 ` [PATCH v2 6/6] arm64: dts: k3-j721e-proc-board: Add wait time for sampling Type-C DIR line Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=247a115e-6b44-2906-07cf-771236d492d6@ti.com \
    --to=kishon@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=robh@kernel.org \
    --cc=rogerq@ti.com \
    --cc=t-kristo@ti.com \
    --cc=vigneshr@ti.com \
    --subject='Re: [PATCH v2 3/6] arm64: dts: ti: k3-j721e-main: Add serdes_ln_ctrl node to select SERDES lane mux' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).