LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sinan Kaya <okaya@codeaurora.org>
To: Bjorn Helgaas <helgaas@kernel.org>
Cc: linux-pci@vger.kernel.org, sulrich@codeaurora.org,
	timur@codeaurora.org,
	Mike Marciniszyn <mike.marciniszyn@intel.com>,
	"open list:HFI1 DRIVER" <linux-rdma@vger.kernel.org>,
	linux-arm-msm@vger.kernel.org,
	Dennis Dalessandro <dennis.dalessandro@intel.com>,
	open list <linux-kernel@vger.kernel.org>,
	Jason Gunthorpe <jgg@ziepe.ca>,
	Doug Ledford <dledford@redhat.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/2] IB/hfi1: Try slot reset before secondary bus reset
Date: Tue, 19 Jun 2018 18:21:43 -0400	[thread overview]
Message-ID: <2593baec-8a28-a3e7-7ebf-7c21addda0b8@codeaurora.org> (raw)
In-Reply-To: <20180619214346.GD33049@bhelgaas-glaptop.roam.corp.google.com>

On 6/19/2018 5:43 PM, Bjorn Helgaas wrote:
>> Hotplug driver removes the device from system when a link down interrupt
>> is observed and performs re-enumeration when link up interrupt is observed.
>>
>> This conflicts with what this code is trying to do. Try secondary bus reset
>> only if pci_reset_slot() fails/unsupported.
> Hi Sinan,
> 
> We had a bunch of discussion here but not sure we ever reached a
> consensus.  It did seem like we'd like to avoid putting hotplug
> knowledge in drivers, though.  What do you think the path forward is?
> 

There are multiple issues. 

We discussed the need for a retrain API on this thread. However, retrain API may
not be enough for this particular usage as the device might need a full link training
sequence following firmware load including a hot reset message. I don't think we can
remove the bus reset usage in this code.

I'd like to start with a small one to address your comment here.

"I think my concern is that knowledge about this reset/link down/hotplug issue is
leaking out and we'll end up with different reset interfaces that may
or may not result in hotplug events.  This seems like a confusing API
because it's hard to explain which interface a driver should use."

I'm thinking of removing pci_reset_slot() and pci_try_reset_slot() functions
as an exported API and fold them into pci_reset_bus() and  pci_try_reset_bus()
API respectively.

This is what happens when you insert a fatal error to a hotplug slot. See multiple
link up/down messages.

/_#_[__333.699731]_pcieport_0001:00:00.0:_AER:_Uncorrected_(Fatal)_error_received:_id=0000
[  333.748116] pcieport 0001:00:00.0: PCIe Bus Error: severity=Uncorrected (Fatal), type=Transaction Layer, id
[  333.816044] pcieport 0001:00:00.0:   device [17cb:0404] error status/mask=00040000/00400000
[  333.871581] pcieport 0001:00:00.0:    [18] Malformed TLP          (First)
[  333.914675] pcieport 0001:00:00.0:   TLP Header: 40000001 000000ff 00000000 00000000
[  333.968397] pciehp 0001:00:00.0:pcie004: Slot(2): Link Down
[  334.043234] iommu: Removing device 0001:01:00.4 from group 0
[  334.095952] iommu: Removing device 0001:01:00.3 from group 0
[  334.144644] iommu: Removing device 0001:01:00.2 from group 0
[  334.194653] iommu: Removing device 0001:01:00.1 from group 0
[  334.243564] pciehp 0001:00:00.0:pcie004: Slot(2): Link Up
[  334.282556] iommu: Removing device 0001:01:00.0 from group 0
[  334.330994] pciehp 0001:00:00.0:pcie004: Slot(2): Link Up event queued; currently getting powered off
[  334.890587] pciehp 0001:00:00.0:pcie004: Timeout on hotplug command 0x13f1 (issued 282900 msec ago)
[  335.070190] pciehp 0001:00:00.0:pcie004: Slot(2): Link Down
[  335.106960] pciehp 0001:00:00.0:pcie004: Slot(2): Link Down event queued; currently getting powered on
[  335.191119] pcieport 0001:00:00.0: AER: Device recovery failed
[  346.590153] pciehp 0001:00:00.0:pcie004: Timeout on hotplug command 0x17f1 (issued 10250 msec ago)

As a suggestion:

1. If the device belongs to a slot, do slot reset. 
2. Otherwise, do bus reset.

Since Oza's DPC/AER patch to refactor fatal error handling, both hotplug driver
and AER/DPC driver will try removing devices and perform enumeration on link events/AER events.

Perfect environment for race condition without a change.

-- 
Sinan Kaya
Qualcomm Datacenter Technologies, Inc. as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project.

  reply	other threads:[~2018-06-19 22:21 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-19 19:56 Sinan Kaya
2018-04-19 19:56 ` [PATCH 2/2] PCI/AER: " Sinan Kaya
2018-04-27 18:51   ` Sinan Kaya
2018-04-19 20:26 ` [PATCH 1/2] IB/hfi1: " Jason Gunthorpe
2018-04-19 20:35   ` Sinan Kaya
2018-04-19 21:47   ` Bjorn Helgaas
2018-04-19 22:11     ` Deucher, Alexander
2018-04-20 14:12       ` Dennis Dalessandro
2018-04-20 14:55       ` Jason Gunthorpe
2018-04-19 22:19     ` Sinan Kaya
2018-04-20 14:00       ` Bjorn Helgaas
2018-04-20 14:23         ` Sinan Kaya
2018-04-20 15:04         ` Alex Williamson
2018-04-23 17:28           ` Sinan Kaya
2018-04-23 19:10             ` Alex Williamson
2018-04-23 20:17               ` Sinan Kaya
2018-04-23 20:23               ` Bjorn Helgaas
2018-04-23 20:41                 ` Alex Williamson
2018-04-25 14:13               ` Sinan Kaya
2018-04-20 14:54     ` Jason Gunthorpe
2018-06-19 21:43 ` Bjorn Helgaas
2018-06-19 22:21   ` Sinan Kaya [this message]
2018-06-22 14:01     ` Bjorn Helgaas
2018-06-22 16:04       ` Sinan Kaya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2593baec-8a28-a3e7-7ebf-7c21addda0b8@codeaurora.org \
    --to=okaya@codeaurora.org \
    --cc=dennis.dalessandro@intel.com \
    --cc=dledford@redhat.com \
    --cc=helgaas@kernel.org \
    --cc=jgg@ziepe.ca \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rdma@vger.kernel.org \
    --cc=mike.marciniszyn@intel.com \
    --cc=sulrich@codeaurora.org \
    --cc=timur@codeaurora.org \
    --subject='Re: [PATCH 1/2] IB/hfi1: Try slot reset before secondary bus reset' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).