LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Ben Dooks <ben.dooks@codethink.co.uk>
To: Alexandre Ghiti <alexandre.ghiti@canonical.com>,
	Support Opensource <support.opensource@diasemi.com>,
	Lee Jones <lee.jones@linaro.org>,
	linux-riscv@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] drivers: mfd: da9063: Add restart notifier implementation
Date: Tue, 21 Sep 2021 11:25:06 +0100	[thread overview]
Message-ID: <28072b8e-2c32-e67d-19d3-026913c0bc7f@codethink.co.uk> (raw)
In-Reply-To: <20210921053356.1705833-1-alexandre.ghiti@canonical.com>

On 21/09/2021 06:33, Alexandre Ghiti wrote:
> The SiFive Unmatched board uses the da9063 PMIC for reset: add a restart
> notifier that will execute a small i2c sequence allowing to reset the
> board.
> 
> The original implementation comes from Marcus Comstedt and Anders Montonen
> (https://forums.sifive.com/t/reboot-command/4721/28).
> 
> Signed-off-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>

I've got a couple of comments here, mainly is this the right place
and has anyone other than you tested. I tried something similar on
my Unmatched and it just turned the board off.

> ---
>   drivers/mfd/da9063-core.c       | 25 +++++++++++++++++++++++++
>   include/linux/mfd/da9063/core.h |  3 +++
>   2 files changed, 28 insertions(+)
> 
> diff --git a/drivers/mfd/da9063-core.c b/drivers/mfd/da9063-core.c
> index df407c3afce3..c87b8d611f20 100644
> --- a/drivers/mfd/da9063-core.c
> +++ b/drivers/mfd/da9063-core.c
> @@ -20,6 +20,7 @@
>   #include <linux/mutex.h>
>   #include <linux/mfd/core.h>
>   #include <linux/regmap.h>
> +#include <linux/reboot.h>
>   
>   #include <linux/mfd/da9063/core.h>
>   #include <linux/mfd/da9063/registers.h>
> @@ -158,6 +159,18 @@ static int da9063_clear_fault_log(struct da9063 *da9063)
>   	return ret;
>   }
>   
> +static int da9063_restart_notify(struct notifier_block *this,
> +				 unsigned long mode, void *cmd)
> +{
> +	struct da9063 *da9063 = container_of(this, struct da9063, restart_handler);
> +
> +	regmap_write(da9063->regmap, DA9063_REG_PAGE_CON, 0x00);
> +	regmap_write(da9063->regmap, DA9063_REG_CONTROL_F, 0x04);
> +	regmap_write(da9063->regmap, DA9063_REG_CONTROL_A, 0x68);
> +
> +	return NOTIFY_DONE;
> +}
> +

Firstly, do you also need to force the AUTOBOOT (bit 3, CONTROL_C)
to ensure the PMIC does restart.

>   int da9063_device_init(struct da9063 *da9063, unsigned int irq)
>   {
>   	int ret;
> @@ -197,6 +210,18 @@ int da9063_device_init(struct da9063 *da9063, unsigned int irq)
>   		}
>   	}
>   
> +	da9063->restart_handler.notifier_call = da9063_restart_notify;
> +	da9063->restart_handler.priority = 128;
> +	ret = register_restart_handler(&da9063->restart_handler);
> +	if (ret) {
> +		dev_err(da9063->dev, "Failed to register restart handler\n");
> +		return ret;
> +	}
> +
> +	devm_add_action(da9063->dev,
> +			(void (*)(void *))unregister_restart_handler,
> +			&da9063->restart_handler);

there's devm_register_reboot_notifier()


> +
>   	return ret;
>   }
>   
> diff --git a/include/linux/mfd/da9063/core.h b/include/linux/mfd/da9063/core.h
> index fa7a43f02f27..1b20c498e340 100644
> --- a/include/linux/mfd/da9063/core.h
> +++ b/include/linux/mfd/da9063/core.h
> @@ -85,6 +85,9 @@ struct da9063 {
>   	int		chip_irq;
>   	unsigned int	irq_base;
>   	struct regmap_irq_chip_data *regmap_irq;
> +
> +	/* Restart */
> +	struct notifier_block restart_handler;
>   };
>   
>   int da9063_device_init(struct da9063 *da9063, unsigned int irq);

Note, the watchdog driver for the DA9063 also has a restart method
although it also does not set the AUTOBOOT bit either.

The best thing is to enable the watchdog driver, the SiFive release
does not have either the core DA9063 or the watchdog driver for it
enabled.

-- 
Ben Dooks				http://www.codethink.co.uk/
Senior Engineer				Codethink - Providing Genius

https://www.codethink.co.uk/privacy.html

  parent reply	other threads:[~2021-09-21 11:04 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-09-21  5:33 Alexandre Ghiti
2021-09-21 10:16 ` Anup Patel
2021-09-21 11:20   ` Alexandre Ghiti
2021-09-21 10:25 ` Ben Dooks [this message]
2021-09-21 11:33   ` Alexandre Ghiti
2021-09-23 13:16     ` Alexandre Ghiti
2021-09-24 15:04 ` Adam Thomson
2021-09-24 16:17   ` Alexandre Ghiti
2021-09-29 13:33     ` Adam Thomson
2021-09-30  7:51       ` David Abdurachmanov
2021-09-30  9:28         ` Adam Thomson
2021-09-30 10:25         ` Alexandre Ghiti
2021-10-04 12:05           ` Alexandre Ghiti
2021-10-04 15:11             ` Adam Thomson
2021-10-05 13:43               ` Alexandre Ghiti
2021-10-06  9:30                 ` Adam Thomson
2021-10-06 11:35                   ` Alexandre Ghiti
2021-10-08  9:46                     ` Adam Thomson
2021-10-12 10:32                       ` Adam Thomson
2021-10-14 15:51                         ` Alexandre Ghiti
2021-10-15  8:47                           ` Adam Thomson
2021-09-30  9:37       ` Alexandre Ghiti
2021-09-30 10:47         ` Adam Thomson
2021-09-30  9:55       ` Alexandre Ghiti
2021-10-04 15:29         ` Adam Thomson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=28072b8e-2c32-e67d-19d3-026913c0bc7f@codethink.co.uk \
    --to=ben.dooks@codethink.co.uk \
    --cc=alexandre.ghiti@canonical.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=support.opensource@diasemi.com \
    --subject='Re: [PATCH] drivers: mfd: da9063: Add restart notifier implementation' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).