LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: <sean.wang@mediatek.com>
To: <robh+dt@kernel.org>, <matthias.bgg@gmail.com>,
	<mark.rutland@arm.com>, <devicetree@vger.kernel.org>,
	<linux-mediatek@lists.infradead.org>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Sean Wang <sean.wang@mediatek.com>
Subject: [PATCH v2 12/12] arm: dts: mt7623: add MT7623N reference board with eMMC
Date: Wed, 11 Apr 2018 16:54:05 +0800	[thread overview]
Message-ID: <28e5f34ba9ef35bfd9e3ffd7ff53506dab4a5cde.1523434758.git.sean.wang@mediatek.com> (raw)
In-Reply-To: <cover.1523434757.git.sean.wang@mediatek.com>

From: Sean Wang <sean.wang@mediatek.com>

Add MT7623N reference board with eMMC. On the board, there is additional
external PHY ICPlus IP1001 transceiver available by port 5 on the MDIO
bus connectted with GMAC2.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Suggested-by: Ryder Lee <ryder.lee@mediatek.com>
---
 arch/arm/boot/dts/Makefile             |   1 +
 arch/arm/boot/dts/mt7623.dtsi          |  17 ++
 arch/arm/boot/dts/mt7623n-rfb-emmc.dts | 326 +++++++++++++++++++++++++++++++++
 3 files changed, 344 insertions(+)
 create mode 100644 arch/arm/boot/dts/mt7623n-rfb-emmc.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bc33a3c..19013d4 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1152,6 +1152,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt6592-evb.dtb \
 	mt7623a-rfb-emmc.dtb \
 	mt7623a-rfb-nand.dtb \
+	mt7623n-rfb-emmc.dtb \
 	mt7623n-rfb-nand.dtb \
 	mt7623n-bananapi-bpi-r2.dtb \
 	mt8127-moose.dtb \
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index f84c37b..d1eb123 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -968,6 +968,14 @@
 		};
 	};
 
+	i2c2_pins_a: i2c2-default {
+		pin-i2c2 {
+			pinmux = <MT7623_PIN_77_SDA2_FUNC_SDA2>,
+				 <MT7623_PIN_78_SCL2_FUNC_SCL2>;
+			bias-disable;
+		};
+	};
+
 	i2c2_pins_b: i2c2-alt {
 		pin-i2c2 {
 			pinmux = <MT7623_PIN_122_GPIO122_FUNC_SDA2>,
@@ -1185,6 +1193,15 @@
 		};
 	};
 
+	spi2_pins_a: spi2-default {
+		pins-spi {
+			pinmux = <MT7623_PIN_101_SPI2_CSN_FUNC_SPI2_CS>,
+				 <MT7623_PIN_104_SPI2_CK_FUNC_SPI2_CK>,
+				 <MT7623_PIN_102_SPI2_MI_FUNC_SPI2_MI>,
+				 <MT7623_PIN_103_SPI2_MO_FUNC_SPI2_MO>;
+		};
+	};
+
 	uart0_pins_a: uart0-default {
 		pins-dat {
 			pinmux = <MT7623_PIN_79_URXD0_FUNC_URXD0>,
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
new file mode 100644
index 0000000..b760613
--- /dev/null
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017-2018 MediaTek Inc.
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include "mt7623.dtsi"
+#include "mt6323.dtsi"
+
+/ {
+	model = "MediaTek MT7623N with eMMC reference board";
+	compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	cpus {
+		cpu@0 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@1 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@2 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+
+		cpu@3 {
+			proc-supply = <&mt6323_vproc_reg>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins_a>;
+
+		factory {
+			label = "factory";
+			linux,code = <BTN_0>;
+			gpios = <&pio 256 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 257 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0 0x80000000 0 0x40000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_5v: regulator-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "mediatek,mt2701-wm8960-machine";
+		mediatek,platform = <&afe>;
+		audio-routing =
+			"Headphone", "HP_L",
+			"Headphone", "HP_R",
+			"LINPUT1", "AMIC",
+			"RINPUT1", "AMIC";
+		mediatek,audio-codec = <&wm8960>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2s0_pins_a>;
+	};
+};
+
+&btif {
+	status = "okay";
+};
+
+&cir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cir_pins_a>;
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "trgmii";
+
+		fixed-link {
+			speed = <1000>;
+			full-duplex;
+			pause;
+		};
+	};
+
+	mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-handle = <&phy5>;
+	};
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy5: ethernet-phy@5 {
+			reg = <5>;
+			phy-mode = "rgmii-rxid";
+		};
+
+		switch@0 {
+			compatible = "mediatek,mt7530";
+			reg = <0>;
+			reset-gpios = <&pio 33 0>;
+			core-supply = <&mt6323_vpa_reg>;
+			io-supply = <&mt6323_vemc3v3_reg>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					label = "lan0";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan1";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "lan2";
+				};
+
+				port@3 {
+					reg = <3>;
+					label = "lan3";
+				};
+
+				port@4 {
+					reg = <4>;
+					label = "wan";
+				};
+
+				port@6 {
+					reg = <6>;
+					label = "cpu";
+					ethernet = <&gmac0>;
+					phy-mode = "trgmii";
+
+					fixed-link {
+						speed = <1000>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins_a>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	status = "okay";
+
+	wm8960: wm8960@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	status = "okay";
+};
+
+&mmc0 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	status = "okay";
+	bus-width = <8>;
+	max-frequency = <50000000>;
+	cap-mmc-highspeed;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	status = "okay";
+	bus-width = <4>;
+	max-frequency = <50000000>;
+	cap-sd-highspeed;
+	cd-gpios = <&pio 261 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_3p3v>;
+};
+
+&pcie {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_default>;
+	status = "okay";
+
+	pcie@0,0 {
+		status = "okay";
+	};
+
+	pcie@1,0 {
+		status = "okay";
+	};
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins_a>;
+	status = "okay";
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins_a>;
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins_a>;
+	status = "okay";
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_a>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins_a>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "okay";
+};
+
+&usb1 {
+	vusb33-supply = <&reg_3p3v>;
+	vbus-supply = <&reg_5v>;
+	status = "okay";
+};
+
+&u3phy1 {
+	status = "okay";
+};
-- 
2.7.4

  parent reply	other threads:[~2018-04-11  8:55 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-11  8:53 [PATCH v2 00/12] refactor dts and add support for more boards sean.wang
2018-04-11  8:53 ` [PATCH v2 01/12] dt-bindings: cpufreq: mediatek: use - instead of _ in examples sean.wang
2018-05-02  8:59   ` Matthias Brugger
2018-04-11  8:53 ` [PATCH v2 02/12] arm: dts: mediatek: converted to using SPDX identifiers sean.wang
2018-04-11  8:53 ` [PATCH v2 03/12] arm: dts: mt7623: fix invalid memory node being generated sean.wang
2018-05-11 15:03   ` Matthias Brugger
2018-05-12  5:28     ` Sean Wang
2018-04-11  8:53 ` [PATCH v2 04/12] arm: dts: mt7623: fix available memory size on bananapi-r2 sean.wang
2018-04-11  8:53 ` [PATCH v2 05/12] arm: dts: mt7623: fix all Warnings (unit_address_vs_reg) sean.wang
2018-04-11  8:53 ` [PATCH v2 06/12] arm: dts: mt7623: add BTIF, HSDMA and SPI-NOR device nodes sean.wang
2018-04-11  8:54 ` [PATCH v2 07/12] arm: dts: mt6323: move node mt6323 leds to mt6323.dtsi sean.wang
2018-04-11  8:54 ` [PATCH v2 08/12] arm: dts: mediatek: modify audio related nodes for both MT2701 and MT7623 sean.wang
2018-04-11  8:54 ` [PATCH v2 09/12] arm: dts: mt7623: extend common file reused by all boards with MT7623 SoCs sean.wang
2018-04-11  8:54 ` [PATCH v2 10/12] arm: dts: mt7623: add MT7623A SoC level DTS sean.wang
2018-04-11  8:54 ` [PATCH v2 11/12] arm: dts: mt7623: add MT7623A reference boards sean.wang
2018-04-11  8:54 ` sean.wang [this message]
2018-05-11 16:40 ` [PATCH v2 00/12] refactor dts and add support for more boards Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=28e5f34ba9ef35bfd9e3ffd7ff53506dab4a5cde.1523434758.git.sean.wang@mediatek.com \
    --to=sean.wang@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v2 12/12] arm: dts: mt7623: add MT7623N reference board with eMMC' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).