LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: Joakim Zhang <qiangqing.zhang@nxp.com>,
	robh+dt@kernel.org, shawnguo@kernel.org
Cc: kernel@pengutronix.de, linux-imx@nxp.com,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH V1 2/4] nvmem: core: introduce "reverse-data" property to reverse buffer
Date: Wed, 11 Aug 2021 10:52:18 +0100	[thread overview]
Message-ID: <2a69b82c-0ecb-51cf-ea60-1827c60bfe85@linaro.org> (raw)
In-Reply-To: <20210810073510.18218-3-qiangqing.zhang@nxp.com>



On 10/08/2021 08:35, Joakim Zhang wrote:
> This patch intends to introduce "reverse-data" property at nvmem
> provider side to reverse buffer.
> 
> For a case used from Ethernet driver, of_get_mac_address() may call
> of_get_mac_addr_nvmem() to get MAC address from nvmem device. MAC address
> programed in imx-ocopt is MSB first in lowest address, so need reverse

Is all the data stored in imx-ocopt reverse byte order?

or someone decided to change the order for only mac-address?


> data then feedback to nvmem consumer. E.g. MAC address read from
> imx-ocopt is 98:e2:06:9f:04:00, after reversed the data is
> 00:04:9f:06:e2:98.
> 
> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
> ---
>   drivers/nvmem/core.c           | 30 ++++++++++++++++++++++++++++++
>   include/linux/nvmem-provider.h |  2 ++
>   2 files changed, 32 insertions(+)
> 
> diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
> index b3bc30a04ed7..ccc2c5801c8e 100644
> --- a/drivers/nvmem/core.c
> +++ b/drivers/nvmem/core.c
> @@ -55,6 +55,7 @@ struct nvmem_cell {
>   	struct device_node	*np;
>   	struct nvmem_device	*nvmem;
>   	struct list_head	node;
> +	u32			flags;

This flag also needs to go in struct nvmem_cell_info too.

>   };
>   
>   static DEFINE_MUTEX(nvmem_mutex);
> @@ -92,6 +93,26 @@ static int __nvmem_reg_write(struct nvmem_device *nvmem, unsigned int offset,
>   	return -EINVAL;
>   }
>   
> +static int nvmem_buffer_reverse(void *bufaddr, int len)
> +{
> +	u8 *buf = (u8 *)bufaddr;
> +	u8 *temp;
> +	int i;
> +
> +	temp = kzalloc(len, GFP_KERNEL);
> +	if (!temp)
> +		return -ENOMEM;
> +
> +	memcpy(temp, buf, len);
> +
> +	for (i = 0; i < len; i++)
> +		buf[i] = temp[len - i - 1];
> +

You could possibly simplify this.

static void nvmem_buffer_reverse(u8 *buf, int len)
{
	int i;

	for (i = 0; i < len/2; i++)
		swap(buf[i], buf[len - i - 1]);
}

> +	kfree(temp);
> +
> +	return 0;
> +}
> +
>   static int nvmem_access_with_keepouts(struct nvmem_device *nvmem,
>   				      unsigned int offset, void *val,
>   				      size_t bytes, int write)
> @@ -705,6 +726,9 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
>   		cell->bytes = be32_to_cpup(addr);
>   		cell->name = kasprintf(GFP_KERNEL, "%pOFn", child);
>   
> +		if (of_property_read_bool(child, "reverse-data"))
> +			cell->flags |= NVMEM_FLAGS_REVERSE_DATA;
> +
>   		addr = of_get_property(child, "bits", &len);
>   		if (addr && len == (2 * sizeof(u32))) {
>   			cell->bit_offset = be32_to_cpup(addr++);
> @@ -1398,6 +1422,12 @@ static int __nvmem_cell_read(struct nvmem_device *nvmem,
>   	if (cell->bit_offset || cell->nbits)
>   		nvmem_shift_read_buffer_in_place(cell, buf);
>   
> +	if (cell->flags & NVMEM_FLAGS_REVERSE_DATA) {
> +		rc = nvmem_buffer_reverse(buf, cell->bytes);
> +		if (rc < 0)
> +			return rc;
> +	}
> +
>   	if (len)
>   		*len = cell->bytes;
>   
> diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
> index 104505e9028f..364ac2a61b11 100644
> --- a/include/linux/nvmem-provider.h
> +++ b/include/linux/nvmem-provider.h
> @@ -31,6 +31,8 @@ enum nvmem_type {
>   #define NVMEM_DEVID_NONE	(-1)
>   #define NVMEM_DEVID_AUTO	(-2)
>   
> +#define NVMEM_FLAGS_REVERSE_DATA	BIT(0)

Maybe NVMEM_FLAGS_REVERSE_BYTE_ORDER and some kerneldoc would help new 
users.

--srini
> +
>   /**
>    * struct nvmem_keepout - NVMEM register keepout range.
>    *
> 

  reply	other threads:[~2021-08-11  9:52 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-10  7:35 [PATCH V1 0/4] nvmem: introduce "reverse-data" property Joakim Zhang
2021-08-10  7:35 ` [PATCH V1 1/4] bindings: " Joakim Zhang
2021-08-10 15:14   ` Jan Lübbe
2021-08-11  8:05     ` Joakim Zhang
2021-08-11  8:06       ` Joakim Zhang
2021-08-11  9:05         ` Jan Lübbe
2021-08-11 10:16   ` Srinivas Kandagatla
2021-08-17 19:58     ` Rob Herring
2021-08-18  7:54       ` Joakim Zhang
2021-08-24  6:31         ` Joakim Zhang
2021-09-03 12:37         ` Srinivas Kandagatla
2021-09-06  8:58           ` Joakim Zhang
2021-09-07 10:11             ` Srinivas Kandagatla
2021-09-08  7:14               ` Joakim Zhang
2021-09-08  8:48                 ` Srinivas Kandagatla
2021-09-08  8:57                   ` Joakim Zhang
2021-09-08  9:21                     ` Srinivas Kandagatla
2021-08-10  7:35 ` [PATCH V1 2/4] nvmem: core: introduce "reverse-data" property to reverse buffer Joakim Zhang
2021-08-11  9:52   ` Srinivas Kandagatla [this message]
2021-08-11 10:16     ` Joakim Zhang
2021-08-10  7:35 ` [PATCH V1 3/4] arm64: dts: imx8m: add "reverse-data" property for MAC ocopt Joakim Zhang
2021-08-10  7:35 ` [PATCH V1 4/4] arm64: dts: imx8m: remove unused "nvmem_macaddr_swap" property for FEC Joakim Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2a69b82c-0ecb-51cf-ea60-1827c60bfe85@linaro.org \
    --to=srinivas.kandagatla@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=qiangqing.zhang@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --subject='Re: [PATCH V1 2/4] nvmem: core: introduce "reverse-data" property to reverse buffer' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).