LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Christophe Leroy <christophe.leroy@csgroup.eu>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>,
	alex@ghiti.fr
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>,
	linux-kernel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	linux-mm@kvack.org
Subject: [PATCH v2 2/9] powerpc/mm: Move vma_mmu_pagesize() and hugetlb_get_unmapped_area() to slice.c
Date: Thu, 25 Nov 2021 09:23:24 +0100	[thread overview]
Message-ID: <2e93765ee3e348da391cfffd783bdd06cbaae30f.1637828367.git.christophe.leroy@csgroup.eu> (raw)
In-Reply-To: <cover.1637828367.git.christophe.leroy@csgroup.eu>

vma_mmu_pagesize() is only required for slices,
otherwise there is a generic weak version.

hugetlb_get_unmapped_area() is dedicated to slices.
radix__hugetlb_get_unmapped_area() as well.

Move them to slice.c

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 arch/powerpc/include/asm/book3s/64/hugetlb.h |  4 --
 arch/powerpc/mm/book3s64/radix_hugetlbpage.c | 55 --------------
 arch/powerpc/mm/book3s64/slice.c             | 76 ++++++++++++++++++++
 arch/powerpc/mm/hugetlbpage.c                | 28 --------
 4 files changed, 76 insertions(+), 87 deletions(-)

diff --git a/arch/powerpc/include/asm/book3s/64/hugetlb.h b/arch/powerpc/include/asm/book3s/64/hugetlb.h
index 12e150e615b7..b37a28f62cf6 100644
--- a/arch/powerpc/include/asm/book3s/64/hugetlb.h
+++ b/arch/powerpc/include/asm/book3s/64/hugetlb.h
@@ -8,10 +8,6 @@
  */
 void radix__flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
 void radix__local_flush_hugetlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
-extern unsigned long
-radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
-				unsigned long len, unsigned long pgoff,
-				unsigned long flags);
 
 extern void radix__huge_ptep_modify_prot_commit(struct vm_area_struct *vma,
 						unsigned long addr, pte_t *ptep,
diff --git a/arch/powerpc/mm/book3s64/radix_hugetlbpage.c b/arch/powerpc/mm/book3s64/radix_hugetlbpage.c
index 23d3e08911d3..d2fb776febb4 100644
--- a/arch/powerpc/mm/book3s64/radix_hugetlbpage.c
+++ b/arch/powerpc/mm/book3s64/radix_hugetlbpage.c
@@ -41,61 +41,6 @@ void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma, unsigned long st
 		radix__flush_tlb_range_psize(vma->vm_mm, start, end, psize);
 }
 
-/*
- * A vairant of hugetlb_get_unmapped_area doing topdown search
- * FIXME!! should we do as x86 does or non hugetlb area does ?
- * ie, use topdown or not based on mmap_is_legacy check ?
- */
-unsigned long
-radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
-				unsigned long len, unsigned long pgoff,
-				unsigned long flags)
-{
-	struct mm_struct *mm = current->mm;
-	struct vm_area_struct *vma;
-	struct hstate *h = hstate_file(file);
-	int fixed = (flags & MAP_FIXED);
-	unsigned long high_limit;
-	struct vm_unmapped_area_info info;
-
-	high_limit = DEFAULT_MAP_WINDOW;
-	if (addr >= high_limit || (fixed && (addr + len > high_limit)))
-		high_limit = TASK_SIZE;
-
-	if (len & ~huge_page_mask(h))
-		return -EINVAL;
-	if (len > high_limit)
-		return -ENOMEM;
-
-	if (fixed) {
-		if (addr > high_limit - len)
-			return -ENOMEM;
-		if (prepare_hugepage_range(file, addr, len))
-			return -EINVAL;
-		return addr;
-	}
-
-	if (addr) {
-		addr = ALIGN(addr, huge_page_size(h));
-		vma = find_vma(mm, addr);
-		if (high_limit - len >= addr && addr >= mmap_min_addr &&
-		    (!vma || addr + len <= vm_start_gap(vma)))
-			return addr;
-	}
-	/*
-	 * We are always doing an topdown search here. Slice code
-	 * does that too.
-	 */
-	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
-	info.length = len;
-	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
-	info.high_limit = mm->mmap_base + (high_limit - DEFAULT_MAP_WINDOW);
-	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
-	info.align_offset = 0;
-
-	return vm_unmapped_area(&info);
-}
-
 void radix__huge_ptep_modify_prot_commit(struct vm_area_struct *vma,
 					 unsigned long addr, pte_t *ptep,
 					 pte_t old_pte, pte_t pte)
diff --git a/arch/powerpc/mm/book3s64/slice.c b/arch/powerpc/mm/book3s64/slice.c
index c83be371c6e7..4c3e9601fdf6 100644
--- a/arch/powerpc/mm/book3s64/slice.c
+++ b/arch/powerpc/mm/book3s64/slice.c
@@ -777,4 +777,80 @@ int slice_is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
 
 	return !slice_check_range_fits(mm, maskp, addr, len);
 }
+
+unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
+{
+	/* With radix we don't use slice, so derive it from vma*/
+	if (radix_enabled())
+		return vma_kernel_pagesize(vma);
+
+	return 1UL << mmu_psize_to_shift(get_slice_psize(vma->vm_mm, vma->vm_start));
+}
+
+/*
+ * A variant of hugetlb_get_unmapped_area() doing topdown search
+ * FIXME!! should we do as x86 does or non hugetlb area does ?
+ * ie, use topdown or not based on mmap_is_legacy check ?
+ */
+static unsigned long
+radix__hugetlb_get_unmapped_area(struct file *file, unsigned long addr, unsigned long len,
+				 unsigned long pgoff, unsigned long flags)
+{
+	struct mm_struct *mm = current->mm;
+	struct vm_area_struct *vma;
+	struct hstate *h = hstate_file(file);
+	int fixed = (flags & MAP_FIXED);
+	unsigned long high_limit;
+	struct vm_unmapped_area_info info;
+
+	high_limit = DEFAULT_MAP_WINDOW;
+	if (addr >= high_limit || (fixed && (addr + len > high_limit)))
+		high_limit = TASK_SIZE;
+
+	if (len & ~huge_page_mask(h))
+		return -EINVAL;
+	if (len > high_limit)
+		return -ENOMEM;
+
+	if (fixed) {
+		if (addr > high_limit - len)
+			return -ENOMEM;
+		if (prepare_hugepage_range(file, addr, len))
+			return -EINVAL;
+		return addr;
+	}
+
+	if (addr) {
+		addr = ALIGN(addr, huge_page_size(h));
+		vma = find_vma(mm, addr);
+		if (high_limit - len >= addr && addr >= mmap_min_addr &&
+		    (!vma || addr + len <= vm_start_gap(vma)))
+			return addr;
+	}
+	/*
+	 * We are always doing an topdown search here. Slice code
+	 * does that too.
+	 */
+	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
+	info.length = len;
+	info.low_limit = max(PAGE_SIZE, mmap_min_addr);
+	info.high_limit = mm->mmap_base + (high_limit - DEFAULT_MAP_WINDOW);
+	info.align_mask = PAGE_MASK & ~huge_page_mask(h);
+	info.align_offset = 0;
+
+	return vm_unmapped_area(&info);
+}
+
+unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
+					unsigned long len, unsigned long pgoff,
+					unsigned long flags)
+{
+	struct hstate *hstate = hstate_file(file);
+	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
+
+	if (radix_enabled())
+		return radix__hugetlb_get_unmapped_area(file, addr, len, pgoff, flags);
+
+	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1);
+}
 #endif
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 82d8b368ca6d..eb9de09e49a3 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -542,34 +542,6 @@ struct page *follow_huge_pd(struct vm_area_struct *vma,
 	return page;
 }
 
-#ifdef CONFIG_PPC_MM_SLICES
-unsigned long hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
-					unsigned long len, unsigned long pgoff,
-					unsigned long flags)
-{
-	struct hstate *hstate = hstate_file(file);
-	int mmu_psize = shift_to_mmu_psize(huge_page_shift(hstate));
-
-#ifdef CONFIG_PPC_RADIX_MMU
-	if (radix_enabled())
-		return radix__hugetlb_get_unmapped_area(file, addr, len,
-						       pgoff, flags);
-#endif
-	return slice_get_unmapped_area(addr, len, flags, mmu_psize, 1);
-}
-#endif
-
-unsigned long vma_mmu_pagesize(struct vm_area_struct *vma)
-{
-	/* With radix we don't use slice, so derive it from vma*/
-	if (IS_ENABLED(CONFIG_PPC_MM_SLICES) && !radix_enabled()) {
-		unsigned int psize = get_slice_psize(vma->vm_mm, vma->vm_start);
-
-		return 1UL << mmu_psize_to_shift(psize);
-	}
-	return vma_kernel_pagesize(vma);
-}
-
 bool __init arch_hugetlb_valid_size(unsigned long size)
 {
 	int shift = __ffs(size);
-- 
2.33.1


  parent reply	other threads:[~2021-11-25  8:42 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-25  8:23 [PATCH v2 0/9] Convert powerpc to default topdown mmap layout Christophe Leroy
2021-11-25  8:23 ` [PATCH v2 1/9] powerpc/mm: Make slice specific to book3s/64 Christophe Leroy
2021-11-25  8:23 ` Christophe Leroy [this message]
2021-11-25  8:23 ` [PATCH v2 3/9] powerpc/mm: Remove CONFIG_PPC_MM_SLICES Christophe Leroy
2021-11-25  8:23 ` [PATCH v2 4/9] powerpc/mm: Remove asm/slice.h Christophe Leroy
2021-11-25  8:23 ` [PATCH v2 5/9] powerpc/mm: Call radix__arch_get_unmapped_area() from arch_get_unmapped_area() Christophe Leroy
2021-11-25  8:23 ` [PATCH v2 6/9] mm: Allow arch specific arch_randomize_brk() with CONFIG_ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT Christophe Leroy
2021-11-25  8:23 ` [PATCH v2 7/9] powerpc/mm: Convert to default topdown mmap layout Christophe Leroy
2021-11-25  8:23 ` [PATCH v2 8/9] powerpc/mm: Properly randomise mmap with slices Christophe Leroy
2021-11-25  8:23 ` [PATCH v2 9/9] powerpc: Simplify and move arch_randomize_brk() Christophe Leroy
2021-11-25 10:42   ` Christophe Leroy
2021-11-26  0:36   ` kernel test robot
2021-11-26 19:23   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=2e93765ee3e348da391cfffd783bdd06cbaae30f.1637828367.git.christophe.leroy@csgroup.eu \
    --to=christophe.leroy@csgroup.eu \
    --cc=alex@ghiti.fr \
    --cc=benh@kernel.crashing.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).