LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
	Mark Brown <broonie@kernel.org>,
	Hans de Goede <hdegoede@redhat.com>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org
Cc: Cezary Rojewski <cezary.rojewski@intel.com>,
	Liam Girdwood <liam.r.girdwood@linux.intel.com>,
	Jie Yang <yang.jie@linux.intel.com>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Subject: Re: [PATCH v1 3/4] ASoC: Intel: bytcr_rt5640: use devm_clk_get_optional() for mclk
Date: Wed, 6 Oct 2021 10:54:12 -0500	[thread overview]
Message-ID: <31338a32-a870-4bf8-52ba-5204109cf974@linux.intel.com> (raw)
In-Reply-To: <20211006150442.16503-3-andriy.shevchenko@linux.intel.com>



On 10/6/21 10:04 AM, Andy Shevchenko wrote:
> The devm_clk_get_optional() helper returns NULL when devm_clk_get()
> returns -ENOENT. This makes things slightly cleaner. The added benefit
> is mostly cosmetic.
> 
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  sound/soc/intel/boards/bytcr_rt5640.c | 75 ++++++++++++---------------
>  1 file changed, 32 insertions(+), 43 deletions(-)
> 
> diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
> index 0f609a0b3527..2e7d45f0f05d 100644
> --- a/sound/soc/intel/boards/bytcr_rt5640.c
> +++ b/sound/soc/intel/boards/bytcr_rt5640.c
> @@ -269,13 +269,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
>  		return -EIO;
>  
>  	if (SND_SOC_DAPM_EVENT_ON(event)) {
> -		if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {

same comment as for rt5651, I don't see the point of removing the test
on this quirk?

> -			ret = clk_prepare_enable(priv->mclk);
> -			if (ret < 0) {
> -				dev_err(card->dev,
> -					"could not configure MCLK state\n");
> -				return ret;
> -			}
> +		ret = clk_prepare_enable(priv->mclk);
> +		if (ret < 0) {
> +			dev_err(card->dev, "could not configure MCLK state\n");
> +			return ret;
>  		}
>  		ret = byt_rt5640_prepare_and_enable_pll1(codec_dai, 48000);
>  	} else {
> @@ -287,10 +284,8 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
>  		ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_RCCLK,
>  					     48000 * 512,
>  					     SND_SOC_CLOCK_IN);
> -		if (!ret) {
> -			if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN)
> -				clk_disable_unprepare(priv->mclk);
> -		}
> +		if (!ret)
> +			clk_disable_unprepare(priv->mclk);
>  	}
>  
>  	if (ret < 0) {
> @@ -1217,30 +1212,25 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
>  			return ret;
>  	}
>  
> -	if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
> -		/*
> -		 * The firmware might enable the clock at
> -		 * boot (this information may or may not
> -		 * be reflected in the enable clock register).
> -		 * To change the rate we must disable the clock
> -		 * first to cover these cases. Due to common
> -		 * clock framework restrictions that do not allow
> -		 * to disable a clock that has not been enabled,
> -		 * we need to enable the clock first.
> -		 */
> -		ret = clk_prepare_enable(priv->mclk);
> -		if (!ret)
> -			clk_disable_unprepare(priv->mclk);
> -
> -		if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ)
> -			ret = clk_set_rate(priv->mclk, 25000000);
> -		else
> -			ret = clk_set_rate(priv->mclk, 19200000);
> +	/*
> +	 * The firmware might enable the clock at boot (this information
> +	 * may or may not be reflected in the enable clock register).
> +	 * To change the rate we must disable the clock first to cover
> +	 * these cases. Due to common clock framework restrictions that
> +	 * do not allow to disable a clock that has not been enabled,
> +	 * we need to enable the clock first.
> +	 */
> +	ret = clk_prepare_enable(priv->mclk);
> +	if (!ret)
> +		clk_disable_unprepare(priv->mclk);
>  
> -		if (ret) {
> -			dev_err(card->dev, "unable to set MCLK rate\n");
> -			return ret;
> -		}
> +	if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ)
> +		ret = clk_set_rate(priv->mclk, 25000000);
> +	else
> +		ret = clk_set_rate(priv->mclk, 19200000);
> +	if (ret) {
> +		dev_err(card->dev, "unable to set MCLK rate\n");
> +		return ret;
>  	}
>  
>  	if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) {
> @@ -1653,7 +1643,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
>  		byt_rt5640_dais[dai_index].cpus->dai_name = "ssp0-port";
>  
>  	if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
> -		priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
> +		priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3");
>  		if (IS_ERR(priv->mclk)) {
>  			ret_val = PTR_ERR(priv->mclk);
>  
> @@ -1661,15 +1651,14 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
>  				"Failed to get MCLK from pmc_plt_clk_3: %d\n",
>  				ret_val);
>  
> -			/*
> -			 * Fall back to bit clock usage for -ENOENT (clock not
> -			 * available likely due to missing dependencies), bail
> -			 * for all other errors, including -EPROBE_DEFER
> -			 */
> -			if (ret_val != -ENOENT)
> -				goto err;
> -			byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN;
> +			goto err;
>  		}
> +		/*
> +		 * Fall back to bit clock usage when clock is not
> +		 * available likely due to missing dependencies.
> +		 */
> +		if (!priv->mclk)
> +			byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN;
>  	}
>  
>  	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) {
> 

  reply	other threads:[~2021-10-06 16:13 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-10-06 15:04 [PATCH v1 1/4] ASoC: Intel: bytcr_rt5640: Get platform data via dev_get_platdata() Andy Shevchenko
2021-10-06 15:04 ` [PATCH v1 2/4] ASoC: Intel: bytcr_rt5640: Use temporary variable for struct device Andy Shevchenko
2021-10-06 15:21   ` Joe Perches
2021-10-06 15:44     ` Andy Shevchenko
2021-10-06 15:48       ` Mark Brown
2021-10-06 16:05         ` Andy Shevchenko
2021-10-06 16:20           ` Mark Brown
2021-10-06 16:34             ` Andy Shevchenko
2021-10-06 15:04 ` [PATCH v1 3/4] ASoC: Intel: bytcr_rt5640: use devm_clk_get_optional() for mclk Andy Shevchenko
2021-10-06 15:54   ` Pierre-Louis Bossart [this message]
2021-10-06 16:24     ` Andy Shevchenko
2021-10-06 15:04 ` [PATCH v1 4/4] ASoC: Intel: bytcr_rt5640: Utilize dev_err_probe() to avoid log saturation Andy Shevchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=31338a32-a870-4bf8-52ba-5204109cf974@linux.intel.com \
    --to=pierre-louis.bossart@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=broonie@kernel.org \
    --cc=cezary.rojewski@intel.com \
    --cc=hdegoede@redhat.com \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --cc=yang.jie@linux.intel.com \
    --subject='Re: [PATCH v1 3/4] ASoC: Intel: bytcr_rt5640: use devm_clk_get_optional() for mclk' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).