LKML Archive on
help / color / mirror / Atom feed
* Open bugs
@ 2008-02-12  8:18 Natalie Protasevich
  2008-02-12 17:57 ` James Bottomley
  0 siblings, 1 reply; 3+ messages in thread
From: Natalie Protasevich @ 2008-02-12  8:18 UTC (permalink / raw)
  To: linux-kernel, akpm, netdev, alsa-devel, linux-ide, bugme-daemon


The bugs listed are over a month old, and haven't been addressed yet.
It would be appreciated if corresponding maintainers identify whether
the bugs have been fixed, or need to be worked on, and take
appropriate action.

In most cases, reporters are standing by and ready to provide
information and necessary testing.

Memory Management=======================================

swapping in 2.6.24-rc5-git3
Date: 12/07/2007
# /proc/sys/vm# cat swappiness
but scp-ing 2GB file causes many processes are swapped out due to
increase of the file cache size.
Was looked at by Jan Kara <>; KAMEZAWA Hiroyuki
<> - commented


SATA DVD drive & UDF filesystem problem
Summary: I mount dvd discs (udf) with piix and ide_cd modules without
problem (on hw decribed higher).
Then I put NEC drive to new mainboard (ICH9 + jmicron SATA/PATA chips)
and use ahci (jmicron) + sr_mod modules.


Problems on booting
Date: 12/22/2007
Summary: The boot stops / hangs on hardware detection of SCSI.  I have
an InitioINI-9X00U/UW
When I have an usb key sticked in /dev/sba, and run lilo then, then it
dont boot but give L99 99 99 99 ... error

Resetting RAID attached to a FC Switch causes kernel panic and crash
Hardware Environment:SunFire X4200 - 2 x dual core AMD Opteron CPUs,
8GB Ram, Qlogic FC adapter.
Summary: Resetting the RAID box causes the X4200 to crash.

3ware 9650SE -8LPML not recognized by 3w-9xxx driver
Problem Description: The 3w-9xxx kernel driver for 3ware 9xxx SATA
RAID Controller series did not recognize the 3ware 9650SE-8LPML SATA
RAID Controller.


kexec buffer error
Date: 01/04/2008
Summary: Close of /boot/kernel-2.6.24-rc6-git11 failed: : buffer error
kexec load failed, error = 1

20000+ wake-ups/second in 2.6.24
Date: 12/02/2007
Summary: "something" is causing the system to go into a state where
the cpu throws us right out of the C-state the kernel asks for
Discussed: Arjan van de Ven, Mark Lord


11/05/2007 still there
Summary: After initial boot messages all output to console stops. The
last visible messages are:
checking if image is initramfs...<6>Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
After that, nothing until XOrg starts up and graphical login/desktop
on VT7are displayed normal.


DVB-T Pluto2: SUSPEND/RESUME methods are missing for this driver
04/05/2007 - still present in 2.6.24
Summary: After SWSUPS resume, pluto2 card is not started properly, led
getts not green and card is unable load tda firmware
Hardware Environment: Acer TravelMate
No one looked at it yet.

Several Pluto bug:

DVB-T Pluto2 && PCI: When playing in dmesg I often getts: "pluto2
0000:03:00.0: overflow irq (10)"
Date: 11/08/2006 still there
Hardware Environment: Acer TravelMate

DVB-T Pluto2: Getting tons of "card hung up :(" messages when card is
removed from pcmcia slot
Date: 11/08/2006 - still there

DVB-T Pluto2: Unable to change MUX
Date: 11/08/2006

KNC1 DVB-C cam module not working on driver load
Date: 1/15/2007 - still there
DVB: registering new adapter (KNC1 DVB-C)
adapter failed MAC signature check
encoded MAC from EEPROM was
KNC1-0: MAC addr = 00:09:d6:6d:5a:f0
TDA10021: i2c-addr = 0x0c, id = 0x7c
DVB: registering frontend 0 (Philips TDA10021 DVB-C)...
budget-av: ci interface initialised.
budget-av: cam inserted A
dvb_ca adaptor 0: PC card did not respond :(

build #341 failed for 2.6.24-rc6-g1842c7f in
Still there in 2.6.24.. has it been fixed?

DVB-USB UMT-010 driver has certain oops when installed
In the umt-010 driver the struct umt_properties sets the number of
URBs for transfer to 20.
But in dvb-usb.h MAX_NO_URBS_FOR_DATA_STREAM is set to 10. This causes
an oops for all devices which use the umt-010 chipset when they are

v4l Problem with dvb-usb and Hauppage USB Stick
dvb-usb: Hauppauge Nova-T Stick crashes during channel search with Kaffeine


kexec buffer error
2.6.24-rc6-git9 works as expected.  git10 fails with root device not found


Two small bugs detected by code review:

physmap does not have a release() function
Summary: Pretty trivial addition of the release()

hgafb module is broken & unmaintained
This one also needs release() function


journal_data mount option causes filesystem corruption with blocksize != 4096
Appears to be e2fsck problem


SC-5200 + wine = System freeze
-- Motherboard: Asus A8R-MVP
-- Harddrive: Samsung 200Gb
-- Soundcard 1: Onboard
-- Soundcard 2: Trust SC-5200
Running any part of wine freezes up the whole system. Both SSH
connections, the normal X screen and any other device, including sound
played by for example music players, freezes up. After about 10
seconds the system reboots.
By removing my second sound card it works. By disabling my onboard
sound it still causes the freeze.


An ioctl to delete an ipv6 tunnel leads to a kernel panic
Summary: The mip6d HA was modified to make a redundancy evolution,
when an HA is interrupted, the other takes over, this leads to some
creation/deletion of routes and tunnels.

BUG: bad unlock balance detected!
Date: 12/11/2007
...bug in the bonding>lock should always turn BH off,
even on read lock.
Handled: Herbert Xu
Problem and solution has been identified, but the bug stalled -
probably needs someone to submit an actual patch


IWL3945 generates WARNING in mac80211/rx.c code
WARNING: at net/mac80211/rx.c:1486 __ieee80211_rx()
Pid: 0, comm: swapper Not tainted 2.6.24-rc6 #8
Call Trace:
 <IRQ>  [<ffffffff88123d89>] :mac80211:__ieee80211_rx+0xc69/0xd30
 [<ffffffff812abd86>] _spin_lock_irqsave+0x26/0xa0
 [<ffffffff812ac3a5>] _spin_unlock_irqrestore+0x15/0x30
 [<ffffffff8815af91>] :iwl3945:iwl_rx_queue_restock+0xd1/0x160
 [<ffffffff812abd86>] _spin_lock_irqsave+0x26/0xa0
 [<ffffffff88114f7b>] :mac80211:ieee80211_tasklet_handler+0xbb/0x120
 [<ffffffff810420a7>] tasklet_action+0x47/0xb0
 [<ffffffff81041fb9>] __do_softirq+0x59/0xd0
 [<ffffffff8100d5dc>] call_softirq+0x1c/0x30
 [<ffffffff8100f975>] do_softirq+0x35/0x90
 [<ffffffff81041ee5>] irq_exit+0x85/0x90
 [<ffffffff8100fa54>] do_IRQ+0x84/0x100
 [<ffffffff8100c931>] ret_from_intr+0x0/0xa
 <EOI>  [<ffffffff811a312f>] acpi_idle_enter_bm+0x272/0x2de
 [<ffffffff811a3125>] acpi_idle_enter_bm+0x268/0x2de
 [<ffffffff81230357>] cpuidle_idle_call+0x97/0xd0
 [<ffffffff812302c0>] cpuidle_idle_call+0x0/0xd0
 [<ffffffff8100b001>] cpu_idle+0x71/0xe0


 in-kernel rpc generates broken RPCBPROC_GETVERSADDR v4 requests
 Problem Description: When locking a file, an invalid
RPCBPROC_GETVERSADDR procedure call is sent out
 Chuck Lever looked at it a while ago

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2008-02-12 18:55 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-02-12  8:18 Open bugs Natalie Protasevich
2008-02-12 17:57 ` James Bottomley
2008-02-12 18:55   ` Natalie Protasevich

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).