LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: <quic_vamslank@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
	<linus.walleij@linaro.org>
Cc: <manivannan.sadhasivam@linaro.org>,
	<linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>,
	"Vamsi Krishna Lanka" <quic_vamslank@quicinc.com>
Subject: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings
Date: Thu, 22 Jul 2021 14:18:48 -0700	[thread overview]
Message-ID: <341f8af967fb0c699996a8f73d34c2b8bd0789cc.1626987605.git.quic_vamslank@quicinc.com> (raw)
In-Reply-To: <cover.1626987605.git.quic_vamslank@quicinc.com>

From: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>

Add device tree binding Documentation details for Qualcomm SDX65
pinctrl driver.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
---
 .../bindings/pinctrl/qcom,sdx65-pinctrl.yaml  | 195 ++++++++++++++++++
 1 file changed, 195 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
new file mode 100644
index 000000000000..9eabc31d4b6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sdx65-pinctrl.yaml
@@ -0,0 +1,195 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sdx65-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SDX65 TLMM block
+
+maintainers:
+  - Vamsi krishna Lanka <quic_vamslank@quicinc.com>
+
+description: |
+  This binding describes the Top Level Mode Multiplexer block found in the
+  SDX65 platform.
+
+properties:
+  compatible:
+    const: qcom,sdx65-tlmm
+
+  reg:
+    description: Specifies the base address and size of the TLMM register space
+    maxItems: 1
+
+  interrupts:
+    description: Specifies the TLMM summary IRQ
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    description: Specifies the PIN numbers and Flags, as defined in
+      include/dt-bindings/interrupt-controller/irq.h
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description: Specifying the pin number and flags, as defined in
+      include/dt-bindings/gpio/gpio.h
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+'-state$':
+    oneOf:
+      - $ref: "#/$defs/qcom-sdx65-tlmm-state"
+      - patternProperties:
+          ".*":
+            $ref: "#/$defs/qcom-sdx65-tlmm-state"
+'$defs':
+  qcom-sdx65-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: "qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state"
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+            - enum: [ ufs_reset, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data, sdc1_rclk ]
+        minItems: 1
+	maxItems: 150
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins. Functions are only valid for gpio pins.
+        enum: [ blsp_uart1, blsp_spi1, blsp_i2c1, blsp_uim1, atest_tsens,
+          bimc_dte1, dac_calib0, blsp_spi8, blsp_uart8, blsp_uim8,
+          qdss_cti_trig_out_b, bimc_dte0, dac_calib1, qdss_cti_trig_in_b,
+          dac_calib2, atest_tsens2, atest_usb1, blsp_spi10, blsp_uart10,
+          blsp_uim10, atest_bbrx1, atest_usb13, atest_bbrx0, atest_usb12,
+          mdp_vsync, edp_lcd, blsp_i2c10, atest_gpsadc1, atest_usb11,
+          atest_gpsadc0, edp_hot, atest_usb10, m_voc, dac_gpio, atest_char,
+          cam_mclk, pll_bypassnl, qdss_stm7, blsp_i2c8, qdss_tracedata_b,
+          pll_reset, qdss_stm6, qdss_stm5, qdss_stm4, atest_usb2, cci_i2c,
+          qdss_stm3, dac_calib3, atest_usb23, atest_char3, dac_calib4,
+          qdss_stm2, atest_usb22, atest_char2, qdss_stm1, dac_calib5,
+          atest_usb21, atest_char1, dbg_out, qdss_stm0, dac_calib6,
+          atest_usb20, atest_char0, dac_calib10, qdss_stm10,
+          qdss_cti_trig_in_a, cci_timer4, blsp_spi6, blsp_uart6, blsp_uim6,
+          blsp2_spi, qdss_stm9, qdss_cti_trig_out_a, dac_calib11,
+          qdss_stm8, cci_timer0, qdss_stm13, dac_calib7, cci_timer1,
+          qdss_stm12, dac_calib8, cci_timer2, blsp1_spi, qdss_stm11,
+          dac_calib9, cci_timer3, cci_async, dac_calib12, blsp_i2c6,
+          qdss_tracectl_a, dac_calib13, qdss_traceclk_a, dac_calib14,
+          dac_calib15, hdmi_rcv, dac_calib16, hdmi_cec, pwr_modem,
+          dac_calib17, hdmi_ddc, pwr_nav, dac_calib18, pwr_crypto,
+          dac_calib19, hdmi_hot, dac_calib20, dac_calib21, pci_e0,
+          dac_calib22, dac_calib23, dac_calib24, tsif1_sync, dac_calib25,
+          sd_write, tsif1_error, blsp_spi2, blsp_uart2, blsp_uim2,
+          qdss_cti, blsp_i2c2, blsp_spi3, blsp_uart3, blsp_uim3, blsp_i2c3,
+          uim3, blsp_spi9, blsp_uart9, blsp_uim9, blsp10_spi, blsp_i2c9,
+          blsp_spi7, blsp_uart7, blsp_uim7, qdss_tracedata_a, blsp_i2c7,
+          qua_mi2s, gcc_gp1_clk_a, ssc_irq, uim4, blsp_spi11, blsp_uart11,
+          blsp_uim11, gcc_gp2_clk_a, gcc_gp3_clk_a, blsp_i2c11, cri_trng0,
+          cri_trng1, cri_trng, qdss_stm18, pri_mi2s, qdss_stm17, blsp_spi4,
+          blsp_uart4, blsp_uim4, qdss_stm16, qdss_stm15, blsp_i2c4,
+          qdss_stm14, dac_calib26, spkr_i2s, audio_ref, lpass_slimbus,
+          isense_dbg, tsense_pwm1, tsense_pwm2, btfm_slimbus, ter_mi2s,
+          qdss_stm22, qdss_stm21, qdss_stm20, qdss_stm19, gcc_gp1_clk_b,
+          sec_mi2s, blsp_spi5, blsp_uart5, blsp_uim5, gcc_gp2_clk_b,
+          gcc_gp3_clk_b, blsp_i2c5, blsp_spi12, blsp_uart12, blsp_uim12,
+          qdss_stm25, qdss_stm31, blsp_i2c12, qdss_stm30, qdss_stm29,
+          tsif1_clk, qdss_stm28, tsif1_en, tsif1_data, sdc4_cmd, qdss_stm27,
+          qdss_traceclk_b, tsif2_error, sdc43, vfr_1, qdss_stm26, tsif2_clk,
+          sdc4_clk, qdss_stm24, tsif2_en, sdc42, qdss_stm23, qdss_tracectl_b,
+          sd_card, tsif2_data, sdc41, tsif2_sync, sdc40, mdp_vsync_p_b,
+          ldo_en, mdp_vsync_s_b, ldo_update, blsp11_uart_tx_b, blsp11_uart_rx_b,
+          blsp11_i2c_sda_b, prng_rosc, blsp11_i2c_scl_b, uim2, uim1, uim_batt,
+          pci_e2, pa_indicator, adsp_ext, ddr_bist, qdss_tracedata_11,
+          qdss_tracedata_12, modem_tsync, nav_dr, nav_pps, pci_e1, gsm_tx,
+          qspi_cs, ssbi2, ssbi1, mss_lte, qspi_clk, qspi0, qspi1, qspi2, qspi3,
+          gpio ]
+
+      drive-strength:
+        enum: [2, 4, 6, 8, 10, 12, 14, 16]
+        default: 2
+        description:
+          Selects the drive strength for the specified pins, in mA.
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/interrupt-controller/arm-gic.h>
+        tlmm: pinctrl@f100000{
+                compatible = "qcom,sdx65-tlmm";
+                reg = <0x03000000 0xdc2000>;
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-ranges = <&tlmm 0 0 109>;
+                interrupt-controller;
+                #interrupt-cells = <2>;
+                interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>;
+
+                serial-pins {
+                        pins = "gpio8", "gpio9";
+                        function = "blsp_uart3";
+                        drive-strength = <2>;
+                        bias-disable;
+                };
+
+		uart-w-subnodes-state {
+                        rx {
+                                pins = "gpio4";
+                                function = "blsp_uart1";
+                                bias-pull-up;
+                        };
+
+                        tx {
+                                pins = "gpio5";
+                                function = "blsp_uart1";
+                                bias-disable;
+                        };
+                };
+        };
+...
-- 
2.32.0


  reply	other threads:[~2021-07-22 21:19 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-22 21:18 [PATCH v2 0/2] Add pinctrl support for SDX65 quic_vamslank
2021-07-22 21:18 ` quic_vamslank [this message]
2021-08-19  3:03   ` [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings Bjorn Andersson
2021-07-22 21:18 ` [PATCH v2 2/2] pinctrl: qcom: Add SDX65 pincontrol driver quic_vamslank
2021-08-19  3:09   ` Bjorn Andersson
2021-07-30 10:02 ` [PATCH v2 0/2] Add pinctrl support for SDX65 Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=341f8af967fb0c699996a8f73d34c2b8bd0789cc.1626987605.git.quic_vamslank@quicinc.com \
    --to=quic_vamslank@quicinc.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=manivannan.sadhasivam@linaro.org \
    --subject='Re: [PATCH v2 1/2] dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).