LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* ext3/ext4 filesystem corruption under post 5.1.0 kernels
@ 2019-05-11 11:33 Arthur Marsh
  2019-05-11 12:43 ` Richard Weinberger
  0 siblings, 1 reply; 16+ messages in thread
From: Arthur Marsh @ 2019-05-11 11:33 UTC (permalink / raw)
  To: linux-kernel

I have yet to bisect, but have had trouble with recent, post 5.1.0 kernels built from Linus' git head on both i386 (Pentium 4 pc) and amd64 (Athlon II X4 640).

The easiest way to trigger the problem is:

git gc

on the kernel source tree, although the problem can occur without doing a git gc.

The filesystem with the kernel source tree is the root file system, ext3, mounted as:

/dev/sdb7 on / type ext3 (rw,relatime,errors=remount-ro)

After the "Compressing objects" stage, the following appears in dmesg:

[  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block
[  849.077426] Aborting journal on device sdb7-8.
[  849.100963] EXT4-fs (sdb7): Remounting filesystem read-only
[  849.100976] jbd2_journal_bmap: journal block not found at offset 989 on sdb7-8

fsck -yv 

then reports:

# fsck -yv
fsck from util-linux 2.33.1
e2fsck 1.45.0 (6-Mar-2019)
/dev/sdb7: recovering journal
/dev/sdb7 contains a file system with errors, check forced.
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Free blocks count wrong (4619656, counted=4619444).
Fix? yes

Free inodes count wrong (15884075, counted=15884058).
Fix? yes


/dev/sdb7: ***** FILE SYSTEM WAS MODIFIED *****

Other times, I have gotten:

"Inodes that were part of a corrupted orphan linked list found."
"Block bitmap differences:"
"Free blocks sound wrong for group"

No problems have been observed with the 5.1.0 release kernel.

Any suggestions for narrowing down the issue welcome.

Arthur.
-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-11 11:33 ext3/ext4 filesystem corruption under post 5.1.0 kernels Arthur Marsh
@ 2019-05-11 12:43 ` Richard Weinberger
  2019-05-11 22:06   ` Theodore Ts'o
  0 siblings, 1 reply; 16+ messages in thread
From: Richard Weinberger @ 2019-05-11 12:43 UTC (permalink / raw)
  To: Arthur Marsh; +Cc: LKML, linux-ext4

[CC'in linux-ext4]

On Sat, May 11, 2019 at 1:47 PM Arthur Marsh
<arthur.marsh@internode.on.net> wrote:
>
> I have yet to bisect, but have had trouble with recent, post 5.1.0 kernels built from Linus' git head on both i386 (Pentium 4 pc) and amd64 (Athlon II X4 640).
>
> The easiest way to trigger the problem is:
>
> git gc
>
> on the kernel source tree, although the problem can occur without doing a git gc.
>
> The filesystem with the kernel source tree is the root file system, ext3, mounted as:
>
> /dev/sdb7 on / type ext3 (rw,relatime,errors=remount-ro)
>
> After the "Compressing objects" stage, the following appears in dmesg:
>
> [  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block
> [  849.077426] Aborting journal on device sdb7-8.
> [  849.100963] EXT4-fs (sdb7): Remounting filesystem read-only
> [  849.100976] jbd2_journal_bmap: journal block not found at offset 989 on sdb7-8
>
> fsck -yv
>
> then reports:
>
> # fsck -yv
> fsck from util-linux 2.33.1
> e2fsck 1.45.0 (6-Mar-2019)
> /dev/sdb7: recovering journal
> /dev/sdb7 contains a file system with errors, check forced.
> Pass 1: Checking inodes, blocks, and sizes
> Pass 2: Checking directory structure
> Pass 3: Checking directory connectivity
> Pass 4: Checking reference counts
> Pass 5: Checking group summary information
> Free blocks count wrong (4619656, counted=4619444).
> Fix? yes
>
> Free inodes count wrong (15884075, counted=15884058).
> Fix? yes
>
>
> /dev/sdb7: ***** FILE SYSTEM WAS MODIFIED *****
>
> Other times, I have gotten:
>
> "Inodes that were part of a corrupted orphan linked list found."
> "Block bitmap differences:"
> "Free blocks sound wrong for group"
>
> No problems have been observed with the 5.1.0 release kernel.
>
> Any suggestions for narrowing down the issue welcome.

Can you git-bisect it?

-- 
Thanks,
//richard

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-11 12:43 ` Richard Weinberger
@ 2019-05-11 22:06   ` Theodore Ts'o
  2019-05-13  7:45     ` Arthur Marsh
                       ` (2 more replies)
  0 siblings, 3 replies; 16+ messages in thread
From: Theodore Ts'o @ 2019-05-11 22:06 UTC (permalink / raw)
  To: Richard Weinberger; +Cc: Arthur Marsh, LKML, linux-ext4

On Sat, May 11, 2019 at 02:43:16PM +0200, Richard Weinberger wrote:
> [CC'in linux-ext4]
> 
> On Sat, May 11, 2019 at 1:47 PM Arthur Marsh
> <arthur.marsh@internode.on.net> wrote:
> >
> >
> > The filesystem with the kernel source tree is the root file system, ext3, mounted as:
> >
> > /dev/sdb7 on / type ext3 (rw,relatime,errors=remount-ro)
> >
> > After the "Compressing objects" stage, the following appears in dmesg:
> >
> > [  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block
> > [  849.077426] Aborting journal on device sdb7-8.
> > [  849.100963] EXT4-fs (sdb7): Remounting filesystem read-only
> > [  849.100976] jbd2_journal_bmap: journal block not found at offset 989 on sdb7-8

This indicates that the extent tree blocks for the journal was found
to be corrupt; so the journal couldn't be found.

> > # fsck -yv
> > fsck from util-linux 2.33.1
> > e2fsck 1.45.0 (6-Mar-2019)
> > /dev/sdb7: recovering journal
> > /dev/sdb7 contains a file system with errors, check forced.

But e2fsck had no problem finding the journal.

> > Pass 1: Checking inodes, blocks, and sizes
> > Pass 2: Checking directory structure
> > Pass 3: Checking directory connectivity
> > Pass 4: Checking reference counts
> > Pass 5: Checking group summary information
> > Free blocks count wrong (4619656, counted=4619444).
> > Fix? yes
> >
> > Free inodes count wrong (15884075, counted=15884058).
> > Fix? yes

And no other significant problems were found.  (Ext4 never updates or
relies on the summary number of free blocks and free inodes, since
updating it is a scalability bottleneck and these values can be
calculated from the per block group free block/inodes count.  So the
fact that e2fsck needed to update them is not an issue.)

So that implies that we got one set of values when we read the journal
inode when attempting to mount the file system, and a *different* set
of values when e2fsck was run.  Which makes means that we need
consider the possibility that the problem is below the file system
layer (e.g., the block layer, device drivers, etc.).


> > /dev/sdb7: ***** FILE SYSTEM WAS MODIFIED *****
> >
> > Other times, I have gotten:
> >
> > "Inodes that were part of a corrupted orphan linked list found."
> > "Block bitmap differences:"
> > "Free blocks sound wrong for group"
> >

This variety of issues also implies that the issue may be in the data
read by the file system, as opposed to an issue in the file system.

Arthur, can you give us the full details of your hardware
configuration and your kernel config file?  Also, what kernel git
commit ID were you testing?

					- Ted

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-11 22:06   ` Theodore Ts'o
@ 2019-05-13  7:45     ` Arthur Marsh
  2019-05-13 10:31     ` Arthur Marsh
  2019-05-17  9:23     ` Geert Uytterhoeven
  2 siblings, 0 replies; 16+ messages in thread
From: Arthur Marsh @ 2019-05-13  7:45 UTC (permalink / raw)
  To: Theodore Ts'o, Richard Weinberger; +Cc: LKML, linux-ext4

[-- Attachment #1: Type: text/plain, Size: 3219 bytes --]



On 12 May 2019 7:36:59 am ACST, Theodore Ts'o <tytso@mit.edu> wrote:
>On Sat, May 11, 2019 at 02:43:16PM +0200, Richard Weinberger wrote:
>> [CC'in linux-ext4]
>> 
>> On Sat, May 11, 2019 at 1:47 PM Arthur Marsh
>> <arthur.marsh@internode.on.net> wrote:
>> >
>> >
>> > The filesystem with the kernel source tree is the root file system,
>ext3, mounted as:
>> >
>> > /dev/sdb7 on / type ext3 (rw,relatime,errors=remount-ro)
>> >
>> > After the "Compressing objects" stage, the following appears in
>dmesg:
>> >
>> > [  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171:
>inode #8: block 30343695: comm jbd2/sdb7-8: invalid block
>> > [  849.077426] Aborting journal on device sdb7-8.
>> > [  849.100963] EXT4-fs (sdb7): Remounting filesystem read-only
>> > [  849.100976] jbd2_journal_bmap: journal block not found at offset
>989 on sdb7-8
>
>This indicates that the extent tree blocks for the journal was found
>to be corrupt; so the journal couldn't be found.
>
>> > # fsck -yv
>> > fsck from util-linux 2.33.1
>> > e2fsck 1.45.0 (6-Mar-2019)
>> > /dev/sdb7: recovering journal
>> > /dev/sdb7 contains a file system with errors, check forced.
>
>But e2fsck had no problem finding the journal.
>
>> > Pass 1: Checking inodes, blocks, and sizes
>> > Pass 2: Checking directory structure
>> > Pass 3: Checking directory connectivity
>> > Pass 4: Checking reference counts
>> > Pass 5: Checking group summary information
>> > Free blocks count wrong (4619656, counted=4619444).
>> > Fix? yes
>> >
>> > Free inodes count wrong (15884075, counted=15884058).
>> > Fix? yes
>
>And no other significant problems were found.  (Ext4 never updates or
>relies on the summary number of free blocks and free inodes, since
>updating it is a scalability bottleneck and these values can be
>calculated from the per block group free block/inodes count.  So the
>fact that e2fsck needed to update them is not an issue.)
>
>So that implies that we got one set of values when we read the journal
>inode when attempting to mount the file system, and a *different* set
>of values when e2fsck was run.  Which makes means that we need
>consider the possibility that the problem is below the file system
>layer (e.g., the block layer, device drivers, etc.).
>
>
>> > /dev/sdb7: ***** FILE SYSTEM WAS MODIFIED *****
>> >
>> > Other times, I have gotten:
>> >
>> > "Inodes that were part of a corrupted orphan linked list found."
>> > "Block bitmap differences:"
>> > "Free blocks sound wrong for group"
>> >
>
>This variety of issues also implies that the issue may be in the data
>read by the file system, as opposed to an issue in the file system.
>
>Arthur, can you give us the full details of your hardware
>configuration and your kernel config file?  Also, what kernel git
>commit ID were you testing?
>
>					- Ted

Please see the attachments, this machine has a Pentium-D and PATA drive for the root filesystem and 32 bit kernel but I also experienced the same problem on an Athlon II X4 640 machine with SATA drive for the root filesystem and 64 bit kernel. 

Arthur. 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

[-- Attachment #2: 20190513gitbisect.log --]
[-- Type: application/octet-stream, Size: 2855 bytes --]

git bisect start
# bad: [1fb3b526df3bd7647e7854915ae6b22299408baf] Merge tag 'docs-5.2a' of git://git.lwn.net/linux
git bisect bad 1fb3b526df3bd7647e7854915ae6b22299408baf
# good: [e93c9c99a629c61837d5a7fc2120cd2b6c70dbdd] Linux 5.1
git bisect good e93c9c99a629c61837d5a7fc2120cd2b6c70dbdd
# bad: [80f232121b69cc69a31ccb2b38c1665d770b0710] Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
git bisect bad 80f232121b69cc69a31ccb2b38c1665d770b0710
# good: [e0dccbdf5ac7ccb9da5612100dedba302f3ebcfe] Merge tag 'staging-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
git bisect good e0dccbdf5ac7ccb9da5612100dedba302f3ebcfe
# good: [5f0d736e7f7db586141f974821b6ca6c1d906d5b] Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
git bisect good 5f0d736e7f7db586141f974821b6ca6c1d906d5b
# bad: [5abe37954e9a315c35c9490f78d55f307c3c636b] Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
git bisect bad 5abe37954e9a315c35c9490f78d55f307c3c636b
# good: [8b35ad6232c462b02e397e87ce702bcddd4ba543] Merge tag 'leds-for-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
git bisect good 8b35ad6232c462b02e397e87ce702bcddd4ba543
# good: [662156641bc409a28fa313fca1a755105425d278] block: don't drain in-progress dispatch in blk_cleanup_queue()
git bisect good 662156641bc409a28fa313fca1a755105425d278
# good: [d3511f53bb2475f2a4e8460bee5a1ae6dea2a433] Merge branch 'parisc-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
git bisect good d3511f53bb2475f2a4e8460bee5a1ae6dea2a433
# good: [149e703cb8bfcbdae46140b108bb6f7d2407df8f] Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
git bisect good 149e703cb8bfcbdae46140b108bb6f7d2407df8f
# bad: [28ba53c07638f31b153e3a32672a6124d0ff2a97] unicode: refactor the rule for regenerating utf8data.h
git bisect bad 28ba53c07638f31b153e3a32672a6124d0ff2a97
# bad: [4b99faa23c51ca31312b9afb876e8e5878daeb80] ext4: cond_resched in work-heavy group loops
git bisect bad 4b99faa23c51ca31312b9afb876e8e5878daeb80
# good: [d454a27384f6eb05904a59d1607461b7ad312aa9] ext4: fix prefetchw of NULL page
git bisect good d454a27384f6eb05904a59d1607461b7ad312aa9
# bad: [e5d01196c0428a206f307e9ee5f6842964098ff0] ext4: ignore e_value_offs for xattrs with value-in-ea-inode
git bisect bad e5d01196c0428a206f307e9ee5f6842964098ff0
# bad: [345c0dbf3a30872d9b204db96b5857cd00808cae] ext4: protect journal inode's blocks using block_validity
git bisect bad 345c0dbf3a30872d9b204db96b5857cd00808cae
# good: [1e83bc8156028a938845a869a3317c3cab9630ac] ext4: use BUG() instead of BUG_ON(1)
git bisect good 1e83bc8156028a938845a869a3317c3cab9630ac
# first bad commit: [345c0dbf3a30872d9b204db96b5857cd00808cae] ext4: protect journal inode's blocks using block_validity

[-- Attachment #3: 20190513.config --]
[-- Type: application/octet-stream, Size: 127698 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 5.1.0-rc3 Kernel Configuration
#

#
# Compiler: gcc (Debian 8.3.0-7) 8.3.0
#
CONFIG_CC_IS_GCC=y
CONFIG_GCC_VERSION=80300
CONFIG_CLANG_VERSION=0
CONFIG_CC_HAS_ASM_GOTO=y
CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
CONFIG_KERNEL_XZ=y
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_USELIB=y
CONFIG_AUDIT=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_CHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# CONFIG_CPU_ISOLATION is not set

#
# RCU Subsystem
#
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_BUILD_BIN2C=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not set
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
# CONFIG_CGROUP_PIDS is not set
# CONFIG_CGROUP_RDMA is not set
CONFIG_CGROUP_FREEZER=y
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
CONFIG_CHECKPOINT_RESTORE=y
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BPF=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
CONFIG_SGETMASK_SYSCALL=y
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_PRINTK_NMI=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
# CONFIG_BPF_SYSCALL is not set
# CONFIG_USERFAULTFD is not set
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLAB_MERGE_DEFAULT=y
# CONFIG_SLAB_FREELIST_RANDOM is not set
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
# CONFIG_64BIT is not set
CONFIG_X86_32=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_BITS_MAX=16
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_FILTER_PGPROT=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_HAVE_INTEL_TXT=y
CONFIG_X86_32_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=2
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
CONFIG_X86_MPPARSE=y
# CONFIG_GOLDFISH is not set
CONFIG_RETPOLINE=y
# CONFIG_X86_CPU_RESCTRL is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_INTEL_LPSS=y
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
CONFIG_IOSF_MBI=y
# CONFIG_IOSF_MBI_DEBUG is not set
# CONFIG_X86_32_IRIS is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_HYPERVISOR_GUEST=y
CONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not set
# CONFIG_PARAVIRT_SPINLOCKS is not set
CONFIG_KVM_GUEST=y
# CONFIG_PVH is not set
# CONFIG_KVM_DEBUG_FS is not set
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MELAN is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_INTERNODE_CACHE_SHIFT=7
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=6
CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_HYGON=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=8
CONFIG_NR_CPUS_DEFAULT=8
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_SCHED_MC_PRIO=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_X86_ANCIENT_MCE is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y

#
# Performance monitoring
#
CONFIG_PERF_EVENTS_INTEL_UNCORE=y
CONFIG_PERF_EVENTS_INTEL_RAPL=y
CONFIG_PERF_EVENTS_INTEL_CSTATE=y
# CONFIG_PERF_EVENTS_AMD_POWER is not set
# CONFIG_X86_LEGACY_VM86 is not set
CONFIG_X86_16BIT=y
CONFIG_X86_ESPFIX32=y
# CONFIG_TOSHIBA is not set
CONFIG_I8K=m
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_AMD=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
# CONFIG_X86_CPA_STATISTICS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ILLEGAL_POINTER_VALUE=0
# CONFIG_HIGHPTE is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_X86_INTEL_UMIP is not set
CONFIG_EFI=y
# CONFIG_EFI_STUB is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
# CONFIG_RANDOMIZE_BASE is not set
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_MODIFY_LDT_SYSCALL=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y

#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_SUSPEND_SKIP_SYNC is not set
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
CONFIG_PM_ADVANCED_DEBUG=y
# CONFIG_PM_TEST_SUSPEND is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_DPM_WATCHDOG is not set
# CONFIG_PM_TRACE_RTC is not set
CONFIG_PM_CLK=y
# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
CONFIG_ACPI_SPCR_TABLE=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS_POWER is not set
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_TAD is not set
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_IPMI=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
CONFIG_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_PCI_SLOT=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
CONFIG_ACPI_SBS=m
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
CONFIG_ACPI_BGRT=y
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
CONFIG_ACPI_APEI=y
CONFIG_ACPI_APEI_GHES=y
CONFIG_ACPI_APEI_PCIEAER=y
# CONFIG_ACPI_APEI_EINJ is not set
# CONFIG_ACPI_APEI_ERST_DEBUG is not set
# CONFIG_DPTF_POWER is not set
CONFIG_ACPI_EXTLOG=y
# CONFIG_PMIC_OPREGION is not set
# CONFIG_ACPI_CONFIGFS is not set
CONFIG_X86_PM_TIMER=y
CONFIG_SFI=y
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
CONFIG_X86_INTEL_PSTATE=y
CONFIG_X86_PCC_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_AMD_FREQ_SENSITIVITY=m
# CONFIG_X86_GX_SUSPMOD is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
CONFIG_X86_P4_CLOCKMOD=m
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
CONFIG_X86_SPEEDSTEP_LIB=m

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
CONFIG_INTEL_IDLE=y

#
# Bus options (PCI etc.)
#
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_ALIX is not set
# CONFIG_NET5501 is not set
# CONFIG_GEOS is not set
CONFIG_AMD_NB=y
CONFIG_X86_SYSFB=y

#
# Binary Emulations
#
CONFIG_COMPAT_32=y
CONFIG_HAVE_ATOMIC_IOMAP=y
CONFIG_HAVE_GENERIC_GUP=y

#
# Firmware Drivers
#
CONFIG_EDD=m
# CONFIG_EDD_OFF is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
CONFIG_ISCSI_IBFT_FIND=y
CONFIG_ISCSI_IBFT=m
# CONFIG_FW_CFG_SYSFS is not set
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=m
CONFIG_EFI_ESRT=y
CONFIG_EFI_VARS_PSTORE=m
# CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
CONFIG_EFI_CAPSULE_LOADER=y
CONFIG_EFI_CAPSULE_QUIRK_QUARK_CSH=y
# CONFIG_EFI_TEST is not set
CONFIG_UEFI_CPER=y
CONFIG_UEFI_CPER_X86=y
CONFIG_EFI_EARLYCON=y

#
# Tegra firmware driver
#
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQFD=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM_VFIO=y
CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y
CONFIG_HAVE_KVM_IRQ_BYPASS=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_MMU_AUDIT is not set
CONFIG_VHOST_NET=m
CONFIG_VHOST_SCSI=m
# CONFIG_VHOST_VSOCK is not set
CONFIG_VHOST=m
# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set

#
# General architecture-dependent options
#
CONFIG_CRASH_CORE=y
CONFIG_KEXEC_CORE=y
CONFIG_HOTPLUG_SMT=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
CONFIG_OPTPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_32BIT_OFF_T=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_HAVE_RCU_TABLE_INVALIDATE=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
CONFIG_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR_STRONG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=8
CONFIG_HAVE_COPY_THREAD_TLS=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_REFCOUNT=y
# CONFIG_REFCOUNT_FULL is not set
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_PLUGIN_HOSTCC=""
CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
CONFIG_LBDAF=y
CONFIG_BLK_SCSI_REQUEST=y
CONFIG_BLK_DEV_BSG=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
# CONFIG_BLK_CMDLINE_PARSER is not set
# CONFIG_BLK_WBT is not set
# CONFIG_BLK_CGROUP_IOLATENCY is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
# CONFIG_AIX_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_MQ_VIRTIO=y
CONFIG_BLK_PM=y

#
# IO Schedulers
#
CONFIG_MQ_IOSCHED_DEADLINE=y
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_PADATA=y
CONFIG_ASN1=m
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_FREEZER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y

#
# Memory Management options
#
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MEMORY_BALLOON=y
CONFIG_BALLOON_COMPACTION=y
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_TRANSPARENT_HUGE_PAGECACHE=y
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
CONFIG_ZSMALLOC=y
# CONFIG_PGTABLE_MAPPING is not set
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
# CONFIG_IDLE_PAGE_TRACKING is not set
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_BENCHMARK is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_NET=y
CONFIG_NET_INGRESS=y
CONFIG_NET_EGRESS=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_UNIX_DIAG=m
# CONFIG_TLS is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_INTERFACE is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_FIB_TRIE_STATS=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_CLASSID=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE_DEMUX=m
CONFIG_NET_IP_TUNNEL=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE_COMMON=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_NET_IPVTI=m
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_INET_UDP_DIAG=m
# CONFIG_INET_RAW_DIAG is not set
# CONFIG_INET_DIAG_DESTROY is not set
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
# CONFIG_TCP_CONG_NV is not set
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_VTI=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_GRE=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
CONFIG_IPV6_PIMSM_V2=y
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
CONFIG_INET_SCTP_DIAG=m
CONFIG_RDS=m
CONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not set
CONFIG_TIPC=m
CONFIG_TIPC_MEDIA_UDP=y
CONFIG_TIPC_DIAG=m
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_L2TP=m
CONFIG_L2TP_DEBUGFS=m
CONFIG_L2TP_V3=y
CONFIG_L2TP_IP=m
CONFIG_L2TP_ETH=m
CONFIG_STP=m
CONFIG_GARP=m
CONFIG_MRP=m
CONFIG_BRIDGE=m
CONFIG_BRIDGE_IGMP_SNOOPING=y
CONFIG_BRIDGE_VLAN_FILTERING=y
CONFIG_HAVE_NET_DSA=y
# CONFIG_NET_DSA is not set
CONFIG_VLAN_8021Q=m
CONFIG_VLAN_8021Q_GVRP=y
CONFIG_VLAN_8021Q_MVRP=y
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
# CONFIG_X25 is not set
CONFIG_LAPB=m
CONFIG_PHONET=m
# CONFIG_6LOWPAN is not set
CONFIG_IEEE802154=m
# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set
CONFIG_IEEE802154_SOCKET=m
# CONFIG_MAC802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFB=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_DRR=m
CONFIG_NET_SCH_MQPRIO=m
# CONFIG_NET_SCH_SKBPRIO is not set
CONFIG_NET_SCH_CHOKE=m
CONFIG_NET_SCH_QFQ=m
CONFIG_NET_SCH_CODEL=m
CONFIG_NET_SCH_FQ_CODEL=m
# CONFIG_NET_SCH_CAKE is not set
CONFIG_NET_SCH_FQ=m
CONFIG_NET_SCH_HHF=m
CONFIG_NET_SCH_PIE=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_SCH_PLUG=m
# CONFIG_NET_SCH_DEFAULT is not set

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_CLS_CGROUP=m
CONFIG_NET_CLS_BPF=m
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
# CONFIG_NET_ACT_SAMPLE is not set
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
# CONFIG_NET_ACT_VLAN is not set
# CONFIG_NET_ACT_BPF is not set
# CONFIG_NET_ACT_SKBMOD is not set
# CONFIG_NET_ACT_IFE is not set
# CONFIG_NET_ACT_TUNNEL_KEY is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y
CONFIG_DCB=y
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
CONFIG_OPENVSWITCH=m
CONFIG_OPENVSWITCH_GRE=m
CONFIG_OPENVSWITCH_VXLAN=m
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
# CONFIG_VMWARE_VMCI_VSOCKETS is not set
# CONFIG_VIRTIO_VSOCKETS is not set
# CONFIG_HYPERV_VSOCKETS is not set
CONFIG_NETLINK_DIAG=m
CONFIG_MPLS=y
CONFIG_NET_MPLS_GSO=y
# CONFIG_MPLS_ROUTING is not set
CONFIG_NET_NSH=m
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_NET_NCSI is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
CONFIG_CGROUP_NET_PRIO=y
CONFIG_CGROUP_NET_CLASSID=y
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_DROP_MONITOR=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_BT is not set
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_IPV6 is not set
# CONFIG_AF_RXRPC_INJECT_LOSS is not set
# CONFIG_AF_RXRPC_DEBUG is not set
# CONFIG_RXKAD is not set
# CONFIG_AF_KCM is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
CONFIG_RFKILL_INPUT=y
# CONFIG_RFKILL_GPIO is not set
CONFIG_NET_9P=m
CONFIG_NET_9P_VIRTIO=m
# CONFIG_NET_9P_DEBUG is not set
# CONFIG_CAIF is not set
CONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not set
# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
CONFIG_NFC=m
CONFIG_NFC_DIGITAL=m
# CONFIG_NFC_NCI is not set
# CONFIG_NFC_HCI is not set

#
# Near Field Communication (NFC) devices
#
# CONFIG_NFC_TRF7970A is not set
# CONFIG_NFC_SIM is not set
CONFIG_NFC_PORT100=m
# CONFIG_NFC_PN533_USB is not set
# CONFIG_NFC_PN533_I2C is not set
# CONFIG_NFC_ST95HF is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
# CONFIG_NET_DEVLINK is not set
CONFIG_FAILOVER=m
CONFIG_HAVE_EBPF_JIT=y

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCIEAER_INJECT=m
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_REALLOC_ENABLE_AUTO=y
CONFIG_PCI_STUB=m
# CONFIG_PCI_PF_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
CONFIG_PCI_IOV=y
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#

#
# Cadence PCIe controllers support
#

#
# DesignWare PCI Core Support
#
CONFIG_PCIE_DW=y
CONFIG_PCIE_DW_HOST=y
CONFIG_PCIE_DW_PLAT=y
CONFIG_PCIE_DW_PLAT_HOST=y
# CONFIG_PCI_MESON is not set

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
CONFIG_PCCARD=m
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=y
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE=""
CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_SPI=y
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_GNSS is not set
CONFIG_MTD=m
# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
CONFIG_MTD_AR7_PARTS=m

#
# Partition parsers
#
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m
# CONFIG_SM_FTL is not set
CONFIG_MTD_OOPS=m
CONFIG_MTD_SWAP=m
# CONFIG_MTD_PARTITIONED_MASTER is not set

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set
CONFIG_MTD_SBC_GXX=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
CONFIG_MTD_NETtel=m
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
# CONFIG_MTD_PCMCIA_ANONYMOUS is not set
CONFIG_MTD_INTEL_VR_NOR=m
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
CONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
# CONFIG_MTD_DATAFLASH_OTP is not set
# CONFIG_MTD_MCHP23K256 is not set
CONFIG_MTD_SST25L=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOCG3 is not set
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_GENERIC is not set
# CONFIG_MTD_ONENAND_OTP is not set
CONFIG_MTD_ONENAND_2X_PROGRAM=y
CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_BCH=m
CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_SM_COMMON=m
# CONFIG_MTD_NAND_DENALI_PCI is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_RICOH=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
# CONFIG_MTD_NAND_CS553X is not set
CONFIG_MTD_NAND_NANDSIM=m
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_SPI_NAND is not set

#
# LPDDR & LPDDR2 PCM memory drivers
#
CONFIG_MTD_LPDDR=m
CONFIG_MTD_QINFO_PROBE=m
# CONFIG_MTD_SPI_NOR is not set
CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_WL_THRESHOLD=4096
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
# CONFIG_MTD_UBI_BLOCK is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_NULL_BLK=m
CONFIG_BLK_DEV_FD=m
CONFIG_CDROM=m
# CONFIG_PARIDE is not set
CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m
CONFIG_ZRAM=m
# CONFIG_ZRAM_WRITEBACK is not set
# CONFIG_ZRAM_MEMORY_TRACKING is not set
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not set
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_VIRTIO_BLK=m
# CONFIG_VIRTIO_BLK_SCSI is not set
CONFIG_BLK_DEV_RBD=m
CONFIG_BLK_DEV_RSXX=m

#
# NVME Support
#
CONFIG_NVME_CORE=m
CONFIG_BLK_DEV_NVME=m
# CONFIG_NVME_MULTIPATH is not set
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_TARGET is not set

#
# Misc devices
#
CONFIG_SENSORS_LIS3LV02D=m
CONFIG_AD525X_DPOT=m
CONFIG_AD525X_DPOT_I2C=m
CONFIG_AD525X_DPOT_SPI=m
# CONFIG_DUMMY_IRQ is not set
CONFIG_IBM_ASM=m
CONFIG_PHANTOM=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_ICS932S401=m
CONFIG_ENCLOSURE_SERVICES=m
CONFIG_HP_ILO=m
CONFIG_APDS9802ALS=m
CONFIG_ISL29003=m
CONFIG_ISL29020=m
CONFIG_SENSORS_TSL2550=m
CONFIG_SENSORS_BH1770=m
CONFIG_SENSORS_APDS990X=m
CONFIG_HMC6352=m
CONFIG_DS1682=m
CONFIG_VMWARE_BALLOON=m
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_LATTICE_ECP3_CONFIG is not set
# CONFIG_SRAM is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_PVPANIC is not set
CONFIG_C2PORT=m
CONFIG_C2PORT_DURAMAR_2150=m

#
# EEPROM support
#
CONFIG_EEPROM_AT24=m
CONFIG_EEPROM_AT25=m
CONFIG_EEPROM_LEGACY=m
CONFIG_EEPROM_MAX6875=m
CONFIG_EEPROM_93CX6=m
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y

#
# Texas Instruments shared transport line discipline
#
# CONFIG_TI_ST is not set
CONFIG_SENSORS_LIS3_I2C=m
# CONFIG_ALTERA_STAPL is not set
CONFIG_INTEL_MEI=m
CONFIG_INTEL_MEI_ME=m
# CONFIG_INTEL_MEI_TXE is not set
CONFIG_VMWARE_VMCI=m

#
# Intel MIC & related support
#

#
# Intel MIC Bus Driver
#

#
# SCIF Bus Driver
#

#
# VOP Bus Driver
#
# CONFIG_VOP_BUS is not set

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#

#
# SCIF Driver
#

#
# Intel MIC Coprocessor State Management (COSM) Drivers
#

#
# VOP Driver
#
# CONFIG_ECHO is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_HABANA_AI is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
CONFIG_SCSI_MOD=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
CONFIG_ISCSI_BOOT_SYSFS=m
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_SMARTPQI is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_MYRB is not set
# CONFIG_SCSI_MYRS is not set
# CONFIG_VMWARE_PVSCSI is not set
# CONFIG_HYPERV_STORAGE is not set
# CONFIG_LIBFC is not set
# CONFIG_SCSI_SNIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_ISCI is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_WD719X is not set
CONFIG_SCSI_DEBUG=m
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_VIRTIO is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
# CONFIG_PCMCIA_NINJA_SCSI is not set
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m
# CONFIG_SCSI_DH is not set
CONFIG_ATA=m
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_ZPODD is not set
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=m
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACARD_AHCI=m
CONFIG_SATA_SIL24=m
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_SX4=m
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=m
# CONFIG_SATA_DWC is not set
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIS=m
CONFIG_SATA_SVW=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m

#
# PATA SFF controllers with BMDMA
#
CONFIG_PATA_ALI=m
CONFIG_PATA_AMD=m
CONFIG_PATA_ARTOP=m
CONFIG_PATA_ATIIXP=m
CONFIG_PATA_ATP867X=m
CONFIG_PATA_CMD64X=m
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
CONFIG_PATA_HPT366=m
CONFIG_PATA_HPT37X=m
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT8213=m
CONFIG_PATA_IT821X=m
CONFIG_PATA_JMICRON=m
CONFIG_PATA_MARVELL=m
CONFIG_PATA_NETCELL=m
CONFIG_PATA_NINJA32=m
CONFIG_PATA_NS87415=m
CONFIG_PATA_OLDPIIX=m
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PDC2027X=m
CONFIG_PATA_PDC_OLD=m
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RDC=m
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SCH=m
CONFIG_PATA_SERVERWORKS=m
CONFIG_PATA_SIL680=m
CONFIG_PATA_SIS=m
CONFIG_PATA_TOSHIBA=m
CONFIG_PATA_TRIFLEX=m
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
CONFIG_PATA_MPIIX=m
CONFIG_PATA_NS87410=m
# CONFIG_PATA_OPTI is not set
CONFIG_PATA_PCMCIA=m
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_RZ1000=m

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
# CONFIG_MD_CLUSTER is not set
CONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_THIN_PROVISIONING=m
CONFIG_DM_CACHE=m
CONFIG_DM_CACHE_SMQ=m
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
CONFIG_DM_LOG_USERSPACE=m
CONFIG_DM_RAID=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_QL=m
CONFIG_DM_MULTIPATH_ST=m
CONFIG_DM_DELAY=m
CONFIG_DM_UEVENT=y
CONFIG_DM_FLAKEY=m
CONFIG_DM_VERITY=m
# CONFIG_DM_VERITY_FEC is not set
CONFIG_DM_SWITCH=m
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
CONFIG_TARGET_CORE=m
CONFIG_TCM_IBLOCK=m
CONFIG_TCM_FILEIO=m
CONFIG_TCM_PSCSI=m
# CONFIG_TCM_USER2 is not set
CONFIG_LOOPBACK_TARGET=m
CONFIG_ISCSI_TARGET=m
CONFIG_SBP_TARGET=m
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
CONFIG_FIREWIRE_NET=m
CONFIG_FIREWIRE_NOSY=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
CONFIG_BONDING=m
CONFIG_DUMMY=m
CONFIG_EQUALIZER=m
# CONFIG_NET_FC is not set
CONFIG_IFB=m
CONFIG_NET_TEAM=m
CONFIG_NET_TEAM_MODE_BROADCAST=m
CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
CONFIG_NET_TEAM_MODE_RANDOM=m
CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
CONFIG_NET_TEAM_MODE_LOADBALANCE=m
CONFIG_MACVLAN=m
CONFIG_MACVTAP=m
# CONFIG_IPVLAN is not set
CONFIG_VXLAN=m
# CONFIG_GENEVE is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=m
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
CONFIG_TAP=m
# CONFIG_TUN_VNET_CROSS_LE is not set
CONFIG_VETH=m
CONFIG_VIRTIO_NET=m
CONFIG_NLMON=m
# CONFIG_ARCNET is not set
# CONFIG_ATM_DRIVERS is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ATHEROS is not set
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=m
CONFIG_TIGON3_HWMON=y
# CONFIG_BNX2X is not set
# CONFIG_SYSTEMPORT is not set
# CONFIG_BNXT is not set
# CONFIG_NET_VENDOR_BROCADE is not set
CONFIG_NET_VENDOR_CADENCE=y
# CONFIG_MACB is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_CX_ECAT is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FUJITSU is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
CONFIG_NET_VENDOR_MICROSEMI=y
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_NET_VENDOR_NETERION=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
CONFIG_NET_VENDOR_NI=y
# CONFIG_NI_XGE_MANAGEMENT_ENET is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
CONFIG_NET_VENDOR_PACKET_ENGINES=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_ATP is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_R8169=m
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SILAN is not set
CONFIG_NET_VENDOR_SIS=y
CONFIG_SIS900=m
CONFIG_SIS190=m
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
CONFIG_NET_VENDOR_VIA=y
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_VELOCITY=m
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XIRCOM is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_NET_SB1000=m
CONFIG_MDIO_DEVICE=m
CONFIG_MDIO_BUS=m
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_MSCC_MIIM is not set
CONFIG_PHYLIB=m
# CONFIG_LED_TRIGGER_PHY is not set

#
# MII PHY device drivers
#
CONFIG_AMD_PHY=m
# CONFIG_AQUANTIA_PHY is not set
# CONFIG_ASIX_PHY is not set
CONFIG_AT803X_PHY=m
# CONFIG_BCM7XXX_PHY is not set
CONFIG_BCM87XX_PHY=m
CONFIG_BCM_NET_PHYLIB=m
CONFIG_BROADCOM_PHY=m
CONFIG_CICADA_PHY=m
# CONFIG_CORTINA_PHY is not set
CONFIG_DAVICOM_PHY=m
# CONFIG_DP83822_PHY is not set
# CONFIG_DP83TC811_PHY is not set
# CONFIG_DP83848_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_FIXED_PHY is not set
CONFIG_ICPLUS_PHY=m
# CONFIG_INTEL_XWAY_PHY is not set
CONFIG_LSI_ET1011C_PHY=m
CONFIG_LXT_PHY=m
CONFIG_MARVELL_PHY=m
# CONFIG_MARVELL_10G_PHY is not set
CONFIG_MICREL_PHY=m
# CONFIG_MICROCHIP_PHY is not set
# CONFIG_MICROCHIP_T1_PHY is not set
# CONFIG_MICROSEMI_PHY is not set
CONFIG_NATIONAL_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_REALTEK_PHY=m
# CONFIG_RENESAS_PHY is not set
# CONFIG_ROCKCHIP_PHY is not set
CONFIG_SMSC_PHY=m
CONFIG_STE10XP=m
# CONFIG_TERANETICS_PHY is not set
CONFIG_VITESSE_PHY=m
# CONFIG_XILINX_GMII2RGMII is not set
# CONFIG_MICREL_KS8995MA is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOATM=m
CONFIG_PPPOE=m
CONFIG_PPTP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_SLIP=m
CONFIG_SLHC=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_USB_NET_DRIVERS=m
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_RTL8152=m
# CONFIG_USB_LAN78XX is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_AX88179_178A=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_CDC_EEM=m
CONFIG_USB_NET_CDC_NCM=m
CONFIG_USB_NET_HUAWEI_CDC_NCM=m
CONFIG_USB_NET_CDC_MBIM=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_SR9700=m
CONFIG_USB_NET_SR9800=m
CONFIG_USB_NET_SMSC75XX=m
CONFIG_USB_NET_SMSC95XX=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET_ENABLE=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_NET_CX82310_ETH=m
CONFIG_USB_NET_KALMIA=m
CONFIG_USB_NET_QMI_WWAN=m
CONFIG_USB_HSO=m
CONFIG_USB_NET_INT51X1=m
CONFIG_USB_CDC_PHONET=m
CONFIG_USB_IPHETH=m
CONFIG_USB_SIERRA_NET=m
CONFIG_USB_VL600=m
# CONFIG_USB_NET_CH9200 is not set
# CONFIG_USB_NET_AQC111 is not set
# CONFIG_WLAN is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
CONFIG_WAN=y
CONFIG_LANMEDIA=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
# CONFIG_HDLC_X25 is not set
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
# CONFIG_PC300TOO is not set
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_MAX=8
# CONFIG_SBNI is not set
CONFIG_IEEE802154_DRIVERS=m
CONFIG_VMXNET3=m
# CONFIG_FUJITSU_ES is not set
CONFIG_HYPERV_NET=m
# CONFIG_NETDEVSIM is not set
CONFIG_NET_FAILOVER=m
# CONFIG_ISDN is not set
# CONFIG_NVM is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
CONFIG_INPUT_SPARSEKMAP=m
CONFIG_INPUT_MATRIXKMAP=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ADP5588=m
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
CONFIG_KEYBOARD_QT2160=m
# CONFIG_KEYBOARD_DLINK_DIR685 is not set
CONFIG_KEYBOARD_LKKBD=m
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_GPIO_POLLED is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_MATRIX is not set
CONFIG_KEYBOARD_LM8323=m
# CONFIG_KEYBOARD_LM8333 is not set
CONFIG_KEYBOARD_MAX7359=m
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_OPENCORES=m
# CONFIG_KEYBOARD_SAMSUNG is not set
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_KEYBOARD_SUNKBD=m
# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set
CONFIG_KEYBOARD_XTKBD=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_BYD=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
CONFIG_MOUSE_PS2_ELANTECH=y
CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y
CONFIG_MOUSE_PS2_SENTELIC=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_PS2_FOCALTECH=y
# CONFIG_MOUSE_PS2_VMMOUSE is not set
CONFIG_MOUSE_PS2_SMBUS=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_CYAPA=m
# CONFIG_MOUSE_ELAN_I2C is not set
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_MOUSE_GPIO is not set
CONFIG_MOUSE_SYNAPTICS_I2C=m
CONFIG_MOUSE_SYNAPTICS_USB=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MSM_VIBRATOR is not set
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_MMA8450 is not set
CONFIG_INPUT_APANEL=m
# CONFIG_INPUT_GP2A is not set
# CONFIG_INPUT_GPIO_BEEPER is not set
# CONFIG_INPUT_GPIO_DECODER is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
CONFIG_INPUT_ATLAS_BTNS=m
CONFIG_INPUT_ATI_REMOTE2=m
CONFIG_INPUT_KEYSPAN_REMOTE=m
# CONFIG_INPUT_KXTJ9 is not set
CONFIG_INPUT_POWERMATE=m
CONFIG_INPUT_YEALINK=m
CONFIG_INPUT_CM109=m
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_CMA3000 is not set
CONFIG_INPUT_IDEAPAD_SLIDEBAR=m
# CONFIG_INPUT_DRV260X_HAPTICS is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_SERIO_ALTERA_PS2=m
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_SERIO_OLPC_APSP is not set
CONFIG_HYPERV_KEYBOARD=m
# CONFIG_SERIO_GPIO_PS2 is not set
# CONFIG_USERIO is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_NOZOMI=m
CONFIG_ISI=m
CONFIG_N_HDLC=m
CONFIG_N_GSM=m
# CONFIG_TRACE_SINK is not set
CONFIG_LDISC_AUTOLOAD=y
CONFIG_DEVMEM=y
# CONFIG_DEVKMEM is not set

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DMA=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_EXAR=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
CONFIG_SERIAL_8250_LPSS=y
# CONFIG_SERIAL_8250_MID is not set
# CONFIG_SERIAL_8250_MOXA is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_MAX310X is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_IFX6X60 is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_ARC is not set
CONFIG_SERIAL_RP2=m
CONFIG_SERIAL_RP2_NR_UARTS=32
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_HVC_DRIVER=y
CONFIG_VIRTIO_CONSOLE=m
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
# CONFIG_IPMI_SSIF is not set
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
CONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
CONFIG_APPLICOM=m
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_SCR24X is not set
CONFIG_IPWIRELESS=m
CONFIG_MWAVE=m
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
CONFIG_HANGCHECK_TIMER=m
CONFIG_TCG_TPM=m
CONFIG_HW_RANDOM_TPM=y
CONFIG_TCG_TIS_CORE=m
CONFIG_TCG_TIS=m
# CONFIG_TCG_TIS_SPI is not set
CONFIG_TCG_TIS_I2C_ATMEL=m
CONFIG_TCG_TIS_I2C_INFINEON=m
CONFIG_TCG_TIS_I2C_NUVOTON=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TCG_CRB is not set
# CONFIG_TCG_VTPM_PROXY is not set
# CONFIG_TCG_TIS_ST33ZP24_I2C is not set
# CONFIG_TCG_TIS_ST33ZP24_SPI is not set
CONFIG_TELCLOCK=m
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set
# CONFIG_RANDOM_TRUST_CPU is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_MUX=m

#
# Multiplexer I2C Chip support
#
# CONFIG_I2C_MUX_GPIO is not set
# CONFIG_I2C_MUX_LTC4306 is not set
# CONFIG_I2C_MUX_PCA9541 is not set
# CONFIG_I2C_MUX_PCA954x is not set
# CONFIG_I2C_MUX_REG is not set
# CONFIG_I2C_MUX_MLXCPLD is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_SMBUS=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_ISMT=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_NFORCE2_S4985=m
# CONFIG_I2C_NVIDIA_GPU is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_CBUS_GPIO is not set
CONFIG_I2C_DESIGNWARE_CORE=m
CONFIG_I2C_DESIGNWARE_PLATFORM=m
# CONFIG_I2C_DESIGNWARE_SLAVE is not set
CONFIG_I2C_DESIGNWARE_PCI=m
# CONFIG_I2C_DESIGNWARE_BAYTRAIL is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
CONFIG_I2C_DIOLAN_U2C=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_TINY_USB=m

#
# Other I2C/SMBus bus drivers
#
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I3C is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
# CONFIG_SPI_MEM is not set

#
# SPI Master Controller Drivers
#
# CONFIG_SPI_ALTERA is not set
# CONFIG_SPI_AXI_SPI_ENGINE is not set
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m
# CONFIG_SPI_CADENCE is not set
# CONFIG_SPI_DESIGNWARE is not set
# CONFIG_SPI_NXP_FLEXSPI is not set
# CONFIG_SPI_GPIO is not set
CONFIG_SPI_LM70_LLP=m
# CONFIG_SPI_OC_TINY is not set
# CONFIG_SPI_PXA2XX is not set
# CONFIG_SPI_ROCKCHIP is not set
# CONFIG_SPI_SC18IS602 is not set
# CONFIG_SPI_SIFIVE is not set
# CONFIG_SPI_MXIC is not set
# CONFIG_SPI_TOPCLIFF_PCH is not set
# CONFIG_SPI_XCOMM is not set
# CONFIG_SPI_XILINX is not set
# CONFIG_SPI_ZYNQMP_GQSPI is not set

#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_LOOPBACK_TEST is not set
# CONFIG_SPI_TLE62X0 is not set
# CONFIG_SPI_SLAVE is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
CONFIG_PPS_CLIENT_LDISC=m
CONFIG_PPS_CLIENT_PARPORT=m
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=m

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# CONFIG_PTP_1588_CLOCK_PCH is not set
CONFIG_PTP_1588_CLOCK_KVM=m
CONFIG_PINCTRL=y
# CONFIG_DEBUG_PINCTRL is not set
# CONFIG_PINCTRL_AMD is not set
# CONFIG_PINCTRL_MCP23S08 is not set
# CONFIG_PINCTRL_SX150X is not set
# CONFIG_PINCTRL_BAYTRAIL is not set
# CONFIG_PINCTRL_CHERRYVIEW is not set
# CONFIG_PINCTRL_BROXTON is not set
# CONFIG_PINCTRL_CANNONLAKE is not set
# CONFIG_PINCTRL_CEDARFORK is not set
# CONFIG_PINCTRL_DENVERTON is not set
# CONFIG_PINCTRL_GEMINILAKE is not set
# CONFIG_PINCTRL_ICELAKE is not set
# CONFIG_PINCTRL_LEWISBURG is not set
# CONFIG_PINCTRL_SUNRISEPOINT is not set
CONFIG_GPIOLIB=y
CONFIG_GPIOLIB_FASTPATH_LIMIT=512
CONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not set

#
# Memory mapped GPIO drivers
#
# CONFIG_GPIO_AMDPT is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_EXAR is not set
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_ICH is not set
# CONFIG_GPIO_LYNXPOINT is not set
# CONFIG_GPIO_MB86S7X is not set
# CONFIG_GPIO_MOCKUP is not set
# CONFIG_GPIO_VX855 is not set
# CONFIG_GPIO_AMD_FCH is not set

#
# Port-mapped I/O GPIO drivers
#
# CONFIG_GPIO_F7188X is not set
# CONFIG_GPIO_IT87 is not set
# CONFIG_GPIO_SCH is not set
# CONFIG_GPIO_SCH311X is not set
# CONFIG_GPIO_WINBOND is not set
# CONFIG_GPIO_WS16C48 is not set

#
# I2C GPIO expanders
#
# CONFIG_GPIO_ADP5588 is not set
# CONFIG_GPIO_MAX7300 is not set
# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
# CONFIG_GPIO_TPIC2810 is not set

#
# MFD GPIO expanders
#

#
# PCI GPIO expanders
#
# CONFIG_GPIO_AMD8111 is not set
# CONFIG_GPIO_BT8XX is not set
CONFIG_GPIO_ML_IOH=m
# CONFIG_GPIO_PCH is not set
# CONFIG_GPIO_PCI_IDIO_16 is not set
# CONFIG_GPIO_PCIE_IDIO_24 is not set
# CONFIG_GPIO_RDC321X is not set

#
# SPI GPIO expanders
#
# CONFIG_GPIO_MAX3191X is not set
# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MC33880 is not set
# CONFIG_GPIO_PISOSR is not set
# CONFIG_GPIO_XRA1403 is not set

#
# USB GPIO expanders
#
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
# CONFIG_W1_MASTER_DS1WM is not set
# CONFIG_W1_MASTER_GPIO is not set

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
# CONFIG_W1_SLAVE_DS2405 is not set
# CONFIG_W1_SLAVE_DS2408 is not set
# CONFIG_W1_SLAVE_DS2413 is not set
# CONFIG_W1_SLAVE_DS2406 is not set
# CONFIG_W1_SLAVE_DS2423 is not set
# CONFIG_W1_SLAVE_DS2805 is not set
CONFIG_W1_SLAVE_DS2431=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set
# CONFIG_W1_SLAVE_DS2438 is not set
# CONFIG_W1_SLAVE_DS2780 is not set
# CONFIG_W1_SLAVE_DS2781 is not set
# CONFIG_W1_SLAVE_DS28E04 is not set
# CONFIG_W1_SLAVE_DS28E17 is not set
# CONFIG_POWER_AVS is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
CONFIG_BATTERY_SBS=m
# CONFIG_CHARGER_SBS is not set
# CONFIG_MANAGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_BATTERY_MAX1721X is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_GPIO is not set
# CONFIG_CHARGER_LTC3651 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_BQ24257 is not set
# CONFIG_CHARGER_BQ24735 is not set
# CONFIG_CHARGER_BQ25890 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_CHARGER_RT9455 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
# CONFIG_SENSORS_AD7314 is not set
CONFIG_SENSORS_AD7414=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_ADT7310 is not set
# CONFIG_SENSORS_ADT7410 is not set
CONFIG_SENSORS_ADT7411=m
CONFIG_SENSORS_ADT7462=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7475=m
CONFIG_SENSORS_ASC7621=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
CONFIG_SENSORS_APPLESMC=m
CONFIG_SENSORS_ASB100=m
# CONFIG_SENSORS_ASPEED is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS620=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_DELL_SMM=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHMD=m
# CONFIG_SENSORS_FTSTEUTATES is not set
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_G760A=m
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_IBMAEM=m
CONFIG_SENSORS_IBMPEX=m
# CONFIG_SENSORS_I5500 is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
CONFIG_SENSORS_LINEAGE=m
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2990 is not set
CONFIG_SENSORS_LTC4151=m
CONFIG_SENSORS_LTC4215=m
# CONFIG_SENSORS_LTC4222 is not set
CONFIG_SENSORS_LTC4245=m
# CONFIG_SENSORS_LTC4260 is not set
CONFIG_SENSORS_LTC4261=m
CONFIG_SENSORS_MAX1111=m
CONFIG_SENSORS_MAX16065=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX1668=m
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31722 is not set
# CONFIG_SENSORS_MAX6621 is not set
CONFIG_SENSORS_MAX6639=m
CONFIG_SENSORS_MAX6642=m
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
CONFIG_SENSORS_ADCXX=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM73=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
# CONFIG_SENSORS_LM95234 is not set
CONFIG_SENSORS_LM95241=m
CONFIG_SENSORS_LM95245=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_NTC_THERMISTOR=m
# CONFIG_SENSORS_NCT6683 is not set
CONFIG_SENSORS_NCT6775=m
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NCT7904 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
CONFIG_SENSORS_PCF8591=m
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT15 is not set
CONFIG_SENSORS_SHT21=m
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHTC1 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_EMC1403=m
CONFIG_SENSORS_EMC2103=m
CONFIG_SENSORS_EMC6W201=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_SCH56XX_COMMON=m
CONFIG_SENSORS_SCH5627=m
CONFIG_SENSORS_SCH5636=m
# CONFIG_SENSORS_STTS751 is not set
CONFIG_SENSORS_SMM665=m
# CONFIG_SENSORS_ADC128D818 is not set
CONFIG_SENSORS_ADS1015=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_ADS7871=m
CONFIG_SENSORS_AMC6821=m
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_TMP102=m
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
CONFIG_SENSORS_TMP401=m
CONFIG_SENSORS_TMP421=m
CONFIG_SENSORS_VIA_CPUTEMP=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
# CONFIG_SENSORS_W83773G is not set
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_XGENE is not set

#
# ACPI drivers
#
CONFIG_SENSORS_ACPI_POWER=m
CONFIG_SENSORS_ATK0110=m
CONFIG_THERMAL=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_GOV_BANG_BANG=y
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set
# CONFIG_CLOCK_THERMAL is not set
# CONFIG_DEVFREQ_THERMAL is not set
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
CONFIG_INTEL_POWERCLAMP=m
CONFIG_X86_PKG_TEMP_THERMAL=m
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# CONFIG_INTEL_PCH_THERMAL is not set
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y
# CONFIG_WATCHDOG_SYSFS is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_WDAT_WDT is not set
# CONFIG_XILINX_WATCHDOG is not set
# CONFIG_ZIIRAVE_WATCHDOG is not set
# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_DW_WATCHDOG is not set
# CONFIG_MAX63XX_WATCHDOG is not set
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
# CONFIG_EBC_C384_WDT is not set
CONFIG_F71808E_WDT=m
CONFIG_SP5100_TCO=m
CONFIG_SBC_FITPC2_WATCHDOG=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_IE6XX_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
CONFIG_IT8712F_WDT=m
CONFIG_IT87_WDT=m
CONFIG_HP_WATCHDOG=m
CONFIG_HPWDT_NMI_DECODING=y
CONFIG_SC1200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_NV_TCO=m
CONFIG_60XX_WDT=m
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
CONFIG_CPU5_WDT=m
CONFIG_SMSC_SCH311X_WDT=m
CONFIG_SMSC37B787_WDT=m
# CONFIG_TQMX86_WDT is not set
CONFIG_VIA_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m
# CONFIG_INTEL_MEI_WDT is not set
# CONFIG_NI903X_WDT is not set
# CONFIG_NIC7018_WDT is not set
# CONFIG_MEN_A21_WDT is not set

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m

#
# Watchdog Pretimeout Governors
#
# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_SSB_PCIHOST is not set
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
CONFIG_SSB_PCMCIAHOST=y
CONFIG_SSB_SDIOHOST_POSSIBLE=y
CONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_DRIVER_GPIO is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
CONFIG_MFD_CORE=m
# CONFIG_MFD_CS5535 is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_AAT2870_CORE is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_SPI is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_SPI is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_HTC_I2CPLD is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
CONFIG_LPC_ICH=m
CONFIG_LPC_SCH=m
# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_EZX_PCAP is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS65010 is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65910 is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_MFD_TPS65912_SPI is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TIMBERDALE is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_ARIZONA_SPI is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM831X_SPI is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=y
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_INTEL_GTT=y
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
CONFIG_VGA_SWITCHEROO=y
CONFIG_DRM=m
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DEBUG_SELFTEST is not set
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
CONFIG_DRM_LOAD_EDID_FIRMWARE=y
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
CONFIG_DRM_I2C_CH7006=m
CONFIG_DRM_I2C_SIL164=m
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set

#
# ARM devices
#
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_USERPTR is not set
# CONFIG_DRM_AMDGPU is not set

#
# ACP (Audio CoProcessor) Configuration
#

#
# AMD Library routines
#
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_VGEM is not set
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
CONFIG_DRM_UDL=m
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
CONFIG_DRM_CIRRUS_QEMU=m
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_VIRTIO_GPU is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_HISI_HIBMC is not set
# CONFIG_DRM_TINYDRM is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_HECUBA=m
CONFIG_FB_SVGALIB=m
CONFIG_FB_BACKLIGHT=m
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_CYBER2000_DDC=y
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_UVESA=m
CONFIG_FB_VESA=y
CONFIG_FB_EFI=y
CONFIG_FB_N411=m
CONFIG_FB_HGA=m
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_I810 is not set
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
# CONFIG_FB_INTEL is not set
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
# CONFIG_FB_ATY_GENERIC_LCD is not set
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_S3_DDC=y
CONFIG_FB_SAVAGE=m
# CONFIG_FB_SAVAGE_I2C is not set
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_VIA=m
# CONFIG_FB_VIA_DIRECT_PROCFS is not set
CONFIG_FB_VIA_X_COMPATIBILITY=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_3DFX_I2C=y
CONFIG_FB_VOODOO1=m
CONFIG_FB_VT8623=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_ARK=m
CONFIG_FB_PM3=m
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
CONFIG_FB_SMSCUFX=m
CONFIG_FB_UDL=m
# CONFIG_FB_IBM_GXT4500 is not set
CONFIG_FB_VIRTUAL=m
# CONFIG_FB_METRONOME is not set
CONFIG_FB_MB862XX=m
CONFIG_FB_MB862XX_PCI_GDC=y
CONFIG_FB_MB862XX_I2C=y
CONFIG_FB_HYPERV=m
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SM712 is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_GENERIC is not set
CONFIG_BACKLIGHT_APPLE=m
# CONFIG_BACKLIGHT_PM8941_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_GPIO is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
CONFIG_VGASTATE=m
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=32
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
# CONFIG_SND_SEQUENCER_OSS is not set
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_MIDI_EMUL=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL3_LIB_SEQ=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
CONFIG_SND_PORTMAN2X4=m
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0
CONFIG_SND_SB_COMMON=m
CONFIG_SND_PCI=y
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ASIHPI=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
# CONFIG_SND_AW2 is not set
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_OXYGEN_LIB=m
CONFIG_SND_OXYGEN=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
CONFIG_SND_CTXFI=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_INDIGOIOX=m
CONFIG_SND_INDIGODJX=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_ES1968_INPUT=y
CONFIG_SND_FM801=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_LOLA=m
# CONFIG_SND_LX6464ES is not set
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_INPUT=y
# CONFIG_SND_MIXART is not set
CONFIG_SND_NM256=m
# CONFIG_SND_PCXHR is not set
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
# CONFIG_SND_SIS7019 is not set
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VIRTUOSO=m
# CONFIG_SND_VX222 is not set
CONFIG_SND_YMFPCI=m

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_INPUT_BEEP_MODE=1
CONFIG_SND_HDA_PATCH_LOADER=y
CONFIG_SND_HDA_CODEC_REALTEK=m
CONFIG_SND_HDA_CODEC_ANALOG=m
CONFIG_SND_HDA_CODEC_SIGMATEL=m
CONFIG_SND_HDA_CODEC_VIA=m
CONFIG_SND_HDA_CODEC_HDMI=m
CONFIG_SND_HDA_CODEC_CIRRUS=m
CONFIG_SND_HDA_CODEC_CONEXANT=m
CONFIG_SND_HDA_CODEC_CA0110=m
CONFIG_SND_HDA_CODEC_CA0132=m
CONFIG_SND_HDA_CODEC_CA0132_DSP=y
CONFIG_SND_HDA_CODEC_CMEDIA=m
CONFIG_SND_HDA_CODEC_SI3054=m
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_DSP_LOADER=y
CONFIG_SND_HDA_PREALLOC_SIZE=64
CONFIG_SND_SPI=y
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_UA101=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y
CONFIG_SND_USB_US122L=m
CONFIG_SND_USB_6FIRE=m
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_USB_POD is not set
# CONFIG_SND_USB_PODHD is not set
# CONFIG_SND_USB_TONEPORT is not set
# CONFIG_SND_USB_VARIAX is not set
CONFIG_SND_FIREWIRE=y
CONFIG_SND_FIREWIRE_LIB=m
# CONFIG_SND_DICE is not set
# CONFIG_SND_OXFW is not set
CONFIG_SND_ISIGHT=m
# CONFIG_SND_FIREWORKS is not set
# CONFIG_SND_BEBOB is not set
# CONFIG_SND_FIREWIRE_DIGI00X is not set
# CONFIG_SND_FIREWIRE_TASCAM is not set
# CONFIG_SND_FIREWIRE_MOTU is not set
# CONFIG_SND_FIREFACE is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SND_X86 is not set
CONFIG_SND_SYNTH_EMUX=m
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=m
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
CONFIG_HID_A4TECH=m
# CONFIG_HID_ACCUTOUCH is not set
CONFIG_HID_ACRUX=m
CONFIG_HID_ACRUX_FF=y
CONFIG_HID_APPLE=m
CONFIG_HID_APPLEIR=m
# CONFIG_HID_ASUS is not set
CONFIG_HID_AUREAL=m
CONFIG_HID_BELKIN=m
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
CONFIG_HID_PRODIKEYS=m
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CP2112 is not set
CONFIG_HID_CYPRESS=m
CONFIG_HID_DRAGONRISE=m
CONFIG_DRAGONRISE_FF=y
CONFIG_HID_EMS_FF=m
# CONFIG_HID_ELAN is not set
CONFIG_HID_ELECOM=m
CONFIG_HID_ELO=m
CONFIG_HID_EZKEY=m
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
CONFIG_HID_HOLTEK=m
CONFIG_HOLTEK_FF=y
# CONFIG_HID_GT683R is not set
CONFIG_HID_KEYTOUCH=m
CONFIG_HID_KYE=m
CONFIG_HID_UCLOGIC=m
CONFIG_HID_WALTOP=m
# CONFIG_HID_VIEWSONIC is not set
CONFIG_HID_GYRATION=m
CONFIG_HID_ICADE=m
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
CONFIG_HID_TWINHAN=m
CONFIG_HID_KENSINGTON=m
CONFIG_HID_LCPOWER=m
CONFIG_HID_LED=m
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=m
CONFIG_HID_LOGITECH_DJ=m
CONFIG_HID_LOGITECH_HIDPP=m
CONFIG_LOGITECH_FF=y
CONFIG_LOGIRUMBLEPAD2_FF=y
CONFIG_LOGIG940_FF=y
CONFIG_LOGIWHEELS_FF=y
CONFIG_HID_MAGICMOUSE=m
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_MULTITOUCH=m
# CONFIG_HID_NTI is not set
CONFIG_HID_NTRIG=m
CONFIG_HID_ORTEK=m
CONFIG_HID_PANTHERLORD=m
CONFIG_PANTHERLORD_FF=y
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_PICOLCD=m
CONFIG_HID_PICOLCD_FB=y
CONFIG_HID_PICOLCD_BACKLIGHT=y
CONFIG_HID_PICOLCD_LEDS=y
# CONFIG_HID_PLANTRONICS is not set
CONFIG_HID_PRIMAX=m
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
CONFIG_HID_SAITEK=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
CONFIG_HID_SPEEDLINK=m
# CONFIG_HID_STEAM is not set
CONFIG_HID_STEELSERIES=m
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
CONFIG_HID_GREENASIA=m
CONFIG_GREENASIA_FF=y
CONFIG_HID_HYPERV_MOUSE=m
CONFIG_HID_SMARTJOYPLUS=m
CONFIG_SMARTJOYPLUS_FF=y
CONFIG_HID_TIVO=m
CONFIG_HID_TOPSEED=m
CONFIG_HID_THINGM=m
CONFIG_HID_THRUSTMASTER=m
CONFIG_THRUSTMASTER_FF=y
# CONFIG_HID_UDRAW_PS3 is not set
CONFIG_HID_WACOM=m
CONFIG_HID_WIIMOTE=m
CONFIG_HID_XINMO=m
CONFIG_HID_ZEROPLUS=m
CONFIG_ZEROPLUS_FF=y
CONFIG_HID_ZYDACRON=m
CONFIG_HID_SENSOR_HUB=m
# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set
# CONFIG_HID_ALPS is not set

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set

#
# I2C HID support
#
CONFIG_I2C_HID=m
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m
CONFIG_USB_WUSB_CBAF=m
# CONFIG_USB_WUSB_CBAF_DEBUG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=m
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
# CONFIG_USB_MAX3421_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_SSB is not set
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
# CONFIG_USB_SL811_HCD_ISO is not set
CONFIG_USB_SL811_CS=m
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_SSB is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
CONFIG_USB_TMC=m

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
CONFIG_USB_STORAGE_ONETOUCH=m
CONFIG_USB_STORAGE_KARMA=m
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
CONFIG_USBIP_CORE=m
CONFIG_USBIP_VHCI_HCD=m
CONFIG_USBIP_VHCI_HC_PORTS=8
CONFIG_USBIP_VHCI_NR_HCS=1
CONFIG_USBIP_HOST=m
# CONFIG_USBIP_VUDC is not set
# CONFIG_USBIP_DEBUG is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_SIMPLE is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_CH341=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP210X=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_F81232=m
# CONFIG_USB_SERIAL_F8153X is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_IUU=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_METRO=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7715_PARPORT=y
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_MXUPORT=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_OTI6858=m
CONFIG_USB_SERIAL_QCAUX=m
CONFIG_USB_SERIAL_QUALCOMM=m
CONFIG_USB_SERIAL_SPCP8X5=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_SYMBOL=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_WWAN=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_OPTICON=m
CONFIG_USB_SERIAL_XSENS_MT=m
CONFIG_USB_SERIAL_WISHBONE=m
CONFIG_USB_SERIAL_SSU100=m
CONFIG_USB_SERIAL_QT2=m
# CONFIG_USB_SERIAL_UPD78F0730 is not set
CONFIG_USB_SERIAL_DEBUG=m

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_SEVSEG=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
CONFIG_USB_TEST=m
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
CONFIG_USB_ISIGHTFW=m
CONFIG_USB_YUREX=m
CONFIG_USB_EZUSB_FX2=m
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set
# CONFIG_USB_CHAOSKEY is not set
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_GPIO_VBUS is not set
# CONFIG_USB_ISP1301 is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_VBUS_DRAW=2
CONFIG_USB_GADGET_STORAGE_NUM_BUFFERS=2

#
# USB Peripheral Controller
#
# CONFIG_USB_FUSB300 is not set
# CONFIG_USB_FOTG210_UDC is not set
# CONFIG_USB_GR_UDC is not set
# CONFIG_USB_R8A66597 is not set
# CONFIG_USB_PXA27X is not set
# CONFIG_USB_MV_UDC is not set
# CONFIG_USB_MV_U3D is not set
# CONFIG_USB_M66592 is not set
# CONFIG_USB_BDC_UDC is not set
# CONFIG_USB_AMD5536UDC is not set
# CONFIG_USB_NET2272 is not set
# CONFIG_USB_NET2280 is not set
# CONFIG_USB_GOKU is not set
CONFIG_USB_EG20T=m
# CONFIG_USB_DUMMY_HCD is not set
# CONFIG_USB_CONFIGFS is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_USB_LED_TRIG is not set
# CONFIG_USB_ULPI_BUS is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set

#
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=y
CONFIG_MMC_SDHCI_ACPI=m
# CONFIG_MMC_SDHCI_PLTFM is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_MMC_SPI is not set
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MMC_CB710=m
CONFIG_MMC_VIA_SDMMC=m
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MMC_USDHI6ROL0 is not set
CONFIG_MMC_CQHCI=m
# CONFIG_MMC_TOSHIBA_PCI is not set
# CONFIG_MMC_MTK is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_APU is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
CONFIG_LEDS_PCA9532=m
# CONFIG_LEDS_PCA9532_GPIO is not set
# CONFIG_LEDS_GPIO is not set
CONFIG_LEDS_LP3944=m
# CONFIG_LEDS_LP3952 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_LP5562 is not set
# CONFIG_LEDS_LP8501 is not set
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
# CONFIG_LEDS_PCA955X_GPIO is not set
# CONFIG_LEDS_PCA963X is not set
CONFIG_LEDS_DAC124S085=m
CONFIG_LEDS_BD2802=m
CONFIG_LEDS_INTEL_SS4200=m
# CONFIG_LEDS_LT3593 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_MTD is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_GPIO is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
CONFIG_ACCESSIBILITY=y
CONFIG_A11Y_BRAILLE_CONSOLE=y
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
CONFIG_EDAC_LEGACY_SYSFS=y
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=m
# CONFIG_EDAC_GHES is not set
CONFIG_EDAC_AMD64=m
# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
CONFIG_EDAC_E752X=m
# CONFIG_EDAC_I82875P is not set
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I3200=m
# CONFIG_EDAC_IE31200 is not set
CONFIG_EDAC_X38=m
CONFIG_EDAC_I5400=m
CONFIG_EDAC_I7CORE=m
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_EDAC_I7300=m
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
CONFIG_RTC_NVMEM=y

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T93 is not set
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1302 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1343 is not set
# CONFIG_RTC_DRV_DS1347 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6916 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RX4581 is not set
# CONFIG_RTC_DRV_RX6110 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
# CONFIG_RTC_DRV_MCP795 is not set
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set

#
# DMA Devices
#
CONFIG_DMA_ENGINE=y
CONFIG_DMA_ACPI=y
# CONFIG_ALTERA_MSGDMA is not set
# CONFIG_INTEL_IDMA64 is not set
# CONFIG_PCH_DMA is not set
# CONFIG_QCOM_HIDMA_MGMT is not set
# CONFIG_QCOM_HIDMA is not set
CONFIG_DW_DMAC_CORE=y
# CONFIG_DW_DMAC is not set
CONFIG_DW_DMAC_PCI=y

#
# DMA Clients
#
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
# CONFIG_UDMABUF is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_PANEL is not set
CONFIG_UIO=m
CONFIG_UIO_CIF=m
# CONFIG_UIO_PDRV_GENIRQ is not set
# CONFIG_UIO_DMEM_GENIRQ is not set
CONFIG_UIO_AEC=m
CONFIG_UIO_SERCOS3=m
CONFIG_UIO_PCI_GENERIC=m
CONFIG_UIO_NETX=m
# CONFIG_UIO_PRUSS is not set
# CONFIG_UIO_MF624 is not set
# CONFIG_UIO_HV_GENERIC is not set
CONFIG_VFIO_IOMMU_TYPE1=m
CONFIG_VFIO_VIRQFD=m
CONFIG_VFIO=m
# CONFIG_VFIO_NOIOMMU is not set
CONFIG_VFIO_PCI=m
# CONFIG_VFIO_PCI_VGA is not set
CONFIG_VFIO_PCI_MMAP=y
CONFIG_VFIO_PCI_INTX=y
CONFIG_VFIO_PCI_IGD=y
# CONFIG_VFIO_MDEV is not set
CONFIG_IRQ_BYPASS_MANAGER=m
CONFIG_VIRT_DRIVERS=y
# CONFIG_VBOXGUEST is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_MENU=y
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_PCI_LEGACY=y
CONFIG_VIRTIO_BALLOON=m
# CONFIG_VIRTIO_INPUT is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
CONFIG_HYPERV=m
CONFIG_HYPERV_UTILS=m
CONFIG_HYPERV_BALLOON=m
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACER_WMI=m
# CONFIG_ACER_WIRELESS is not set
CONFIG_ACERHDF=m
# CONFIG_ALIENWARE_WMI is not set
CONFIG_ASUS_LAPTOP=m
CONFIG_DCDBAS=m
# CONFIG_DELL_SMBIOS is not set
CONFIG_DELL_WMI_AIO=m
# CONFIG_DELL_WMI_LED is not set
# CONFIG_DELL_SMO8800 is not set
# CONFIG_DELL_RBTN is not set
CONFIG_DELL_RBU=m
CONFIG_FUJITSU_LAPTOP=m
CONFIG_FUJITSU_TABLET=m
CONFIG_AMILO_RFKILL=m
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_TC1100_WMI is not set
CONFIG_HP_ACCEL=m
CONFIG_HP_WIRELESS=m
CONFIG_HP_WMI=m
# CONFIG_LG_LAPTOP is not set
CONFIG_MSI_LAPTOP=m
CONFIG_PANASONIC_LAPTOP=m
CONFIG_COMPAL_LAPTOP=m
CONFIG_SONY_LAPTOP=m
# CONFIG_SONYPI_COMPAT is not set
CONFIG_IDEAPAD_LAPTOP=m
# CONFIG_SURFACE3_WMI is not set
CONFIG_THINKPAD_ACPI=m
CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_SENSORS_HDAPS=m
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ASUS_WIRELESS is not set
CONFIG_ACPI_WMI=m
CONFIG_WMI_BMOF=m
# CONFIG_INTEL_WMI_THUNDERBOLT is not set
CONFIG_MSI_WMI=m
# CONFIG_PEAQ_WMI is not set
CONFIG_TOPSTAR_LAPTOP=m
CONFIG_TOSHIBA_BT_RFKILL=m
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
CONFIG_ACPI_CMPC=m
# CONFIG_INTEL_INT0002_VGPIO is not set
# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
CONFIG_INTEL_IPS=m
# CONFIG_INTEL_PMC_CORE is not set
# CONFIG_IBM_RTL is not set
CONFIG_SAMSUNG_LAPTOP=m
CONFIG_MXM_WMI=m
CONFIG_INTEL_OAKTRAIL=m
# CONFIG_SAMSUNG_Q10 is not set
CONFIG_APPLE_GMUX=m
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_PMC_IPC is not set
# CONFIG_SURFACE_PRO3_BUTTON is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_I2C_MULTI_INSTANTIATE is not set
# CONFIG_INTEL_ATOMISP2_PM is not set
# CONFIG_HUAWEI_WMI is not set
# CONFIG_PCENGINES_APU2 is not set
CONFIG_PMC_ATOM=y
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
CONFIG_CLKDEV_LOOKUP=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y

#
# Common Clock Framework
#
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKSRC_I8253=y
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_MAILBOX=y
CONFIG_PCC=y
# CONFIG_ALTERA_MBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
# CONFIG_INTEL_IOMMU_SVM is not set
# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set
CONFIG_INTEL_IOMMU_FLOPPY_WA=y
CONFIG_HYPERV_IOMMU=y

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set

#
# Rpmsg drivers
#
# CONFIG_RPMSG_QCOM_GLINK_RPM is not set
# CONFIG_RPMSG_VIRTIO is not set
# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#

#
# Broadcom SoC drivers
#

#
# NXP/Freescale QorIQ SoC drivers
#

#
# i.MX SoC drivers
#

#
# Qualcomm SoC drivers
#
# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# CONFIG_XILINX_VCU is not set
CONFIG_PM_DEVFREQ=y

#
# DEVFREQ Governors
#
CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=m
# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set
# CONFIG_DEVFREQ_GOV_POWERSAVE is not set
# CONFIG_DEVFREQ_GOV_USERSPACE is not set
# CONFIG_DEVFREQ_GOV_PASSIVE is not set

#
# DEVFREQ Drivers
#
# CONFIG_PM_DEVFREQ_EVENT is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
CONFIG_ARM_GIC_MAX_NR=1
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
CONFIG_GENERIC_PHY=y
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
CONFIG_POWERCAP=y
CONFIG_INTEL_RAPL=m
# CONFIG_IDLE_INJECT is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
CONFIG_RAS=y
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set
CONFIG_DAX=y
# CONFIG_DEV_DAX is not set
CONFIG_NVMEM=y

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# CONFIG_FPGA is not set
CONFIG_PM_OPP=y
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_VALIDATE_FS_PARSER=y
CONFIG_FS_IOMAP=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=m
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
CONFIG_F2FS_STAT_FS=y
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
CONFIG_F2FS_FS_SECURITY=y
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
# CONFIG_FS_DAX is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
# CONFIG_EXPORTFS_BLOCK_OPS is not set
CONFIG_FILE_LOCKING=y
CONFIG_MANDATORY_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QUOTA_DEBUG is not set
CONFIG_QUOTA_TREE=m
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_AUTOFS_FS=m
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
CONFIG_OVERLAY_FS=m
# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set
CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y
# CONFIG_OVERLAY_FS_INDEX is not set
# CONFIG_OVERLAY_FS_XINO_AUTO is not set
# CONFIG_OVERLAY_FS_METACOPY is not set

#
# Caches
#
CONFIG_FSCACHE=m
CONFIG_FSCACHE_STATS=y
# CONFIG_FSCACHE_HISTOGRAM is not set
# CONFIG_FSCACHE_DEBUG is not set
# CONFIG_FSCACHE_OBJECT_LIST is not set
CONFIG_CACHEFILES=m
# CONFIG_CACHEFILES_DEBUG is not set
# CONFIG_CACHEFILES_HISTOGRAM is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_FAT_DEFAULT_UTF8 is not set
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_MEMFD_CREATE=y
CONFIG_CONFIGFS_FS=m
CONFIG_EFIVAR_FS=m
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
# CONFIG_ECRYPT_FS_MESSAGING is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_JFFS2_CMODE_NONE is not set
CONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
CONFIG_UBIFS_FS=m
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
# CONFIG_UBIFS_ATIME_SUPPORT is not set
CONFIG_UBIFS_FS_XATTR=y
CONFIG_UBIFS_FS_SECURITY=y
# CONFIG_UBIFS_FS_AUTHENTICATION is not set
CONFIG_CRAMFS=m
CONFIG_CRAMFS_BLOCKDEV=y
# CONFIG_CRAMFS_MTD is not set
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
# CONFIG_SQUASHFS_DECOMP_MULTI is not set
# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
CONFIG_SQUASHFS_LZO=y
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
CONFIG_VXFS_FS=m
CONFIG_MINIX_FS=m
CONFIG_OMFS_FS=m
# CONFIG_HPFS_FS is not set
CONFIG_QNX4FS_FS=m
CONFIG_QNX6FS_FS=m
# CONFIG_QNX6FS_DEBUG is not set
CONFIG_ROMFS_FS=m
# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
# CONFIG_ROMFS_BACKED_BY_MTD is not set
CONFIG_ROMFS_BACKED_BY_BOTH=y
CONFIG_ROMFS_ON_BLOCK=y
CONFIG_ROMFS_ON_MTD=y
CONFIG_PSTORE=y
CONFIG_PSTORE_DEFLATE_COMPRESS=y
# CONFIG_PSTORE_LZO_COMPRESS is not set
# CONFIG_PSTORE_LZ4_COMPRESS is not set
# CONFIG_PSTORE_LZ4HC_COMPRESS is not set
# CONFIG_PSTORE_842_COMPRESS is not set
# CONFIG_PSTORE_ZSTD_COMPRESS is not set
CONFIG_PSTORE_COMPRESS=y
CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
CONFIG_PSTORE_COMPRESS_DEFAULT="deflate"
# CONFIG_PSTORE_CONSOLE is not set
# CONFIG_PSTORE_PMSG is not set
CONFIG_PSTORE_RAM=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_ACL=y
CONFIG_CIFS_DEBUG=y
CONFIG_CIFS_DEBUG2=y
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_FSCACHE=y
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_MAC_ROMAN=m
CONFIG_NLS_MAC_CELTIC=m
CONFIG_NLS_MAC_CENTEURO=m
CONFIG_NLS_MAC_CROATIAN=m
CONFIG_NLS_MAC_CYRILLIC=m
CONFIG_NLS_MAC_GAELIC=m
CONFIG_NLS_MAC_GREEK=m
CONFIG_NLS_MAC_ICELAND=m
CONFIG_NLS_MAC_INUIT=m
CONFIG_NLS_MAC_ROMANIAN=m
CONFIG_NLS_MAC_TURKISH=m
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
CONFIG_DLM_DEBUG=y

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEY_DH_OPERATIONS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_PATH=y
# CONFIG_INTEL_TXT is not set
CONFIG_LSM_MMAP_MIN_ADDR=65536
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_HARDENED_USERCOPY_FALLBACK=y
# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
CONFIG_SECURITY_SELINUX=y
# CONFIG_SECURITY_SELINUX_BOOTPARAM is not set
# CONFIG_SECURITY_SELINUX_DISABLE is not set
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SMACK is not set
CONFIG_SECURITY_TOMOYO=y
CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048
CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024
# CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set
CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init"
CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init"
CONFIG_SECURITY_APPARMOR=y
CONFIG_SECURITY_APPARMOR_HASH=y
CONFIG_SECURITY_APPARMOR_HASH_DEFAULT=y
# CONFIG_SECURITY_APPARMOR_DEBUG is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
CONFIG_INTEGRITY=y
# CONFIG_INTEGRITY_SIGNATURE is not set
CONFIG_INTEGRITY_AUDIT=y
# CONFIG_IMA is not set
# CONFIG_EVM is not set
CONFIG_DEFAULT_SECURITY_SELINUX=y
# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
# CONFIG_DEFAULT_SECURITY_APPARMOR is not set
# CONFIG_DEFAULT_SECURITY_DAC is not set
CONFIG_LSM="yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,apparmor"
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_ASYNC_PQ=m
CONFIG_ASYNC_RAID6_RECOV=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=m
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_RSA=m
# CONFIG_CRYPTO_DH is not set
# CONFIG_CRYPTO_ECDH is not set
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_SIMD=m
CONFIG_CRYPTO_ENGINE=m

#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
# CONFIG_CRYPTO_CHACHA20POLY1305 is not set
# CONFIG_CRYPTO_AEGIS128 is not set
# CONFIG_CRYPTO_AEGIS128L is not set
# CONFIG_CRYPTO_AEGIS256 is not set
# CONFIG_CRYPTO_MORUS640 is not set
# CONFIG_CRYPTO_MORUS1280 is not set
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
# CONFIG_CRYPTO_OFB is not set
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_ADIANTUM is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32C_INTEL=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_GHASH=m
# CONFIG_CRYPTO_POLY1305 is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3 is not set
# CONFIG_CRYPTO_STREEBOG is not set
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_TI is not set
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_AES_NI_INTEL=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST_COMMON=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_CHACHA20 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_586 is not set
# CONFIG_CRYPTO_SM4 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_586 is not set

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
# CONFIG_CRYPTO_ZSTD is not set

#
# Random Number Generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
# CONFIG_CRYPTO_DRBG_HASH is not set
# CONFIG_CRYPTO_DRBG_CTR is not set
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
CONFIG_CRYPTO_USER_API=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
# CONFIG_CRYPTO_USER_API_RNG is not set
# CONFIG_CRYPTO_USER_API_AEAD is not set
CONFIG_CRYPTO_HASH_INFO=y
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_CRYPTO_DEV_CCP=y
CONFIG_CRYPTO_DEV_CCP_DD=m
CONFIG_CRYPTO_DEV_SP_CCP=y
CONFIG_CRYPTO_DEV_CCP_CRYPTO=m
# CONFIG_CRYPTO_DEV_QAT_DH895xCC is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXX is not set
# CONFIG_CRYPTO_DEV_QAT_C62X is not set
# CONFIG_CRYPTO_DEV_QAT_DH895xCCVF is not set
# CONFIG_CRYPTO_DEV_QAT_C3XXXVF is not set
# CONFIG_CRYPTO_DEV_QAT_C62XVF is not set
CONFIG_CRYPTO_DEV_VIRTIO=m
# CONFIG_ASYMMETRIC_KEY_TYPE is not set

#
# Certificates for signature checking
#
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=m
CONFIG_RAID6_PQ_BENCHMARK=y
CONFIG_BITREVERSE=y
CONFIG_RATIONAL=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=m
# CONFIG_CRC4 is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
CONFIG_AUDIT_GENERIC=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_ENC8=y
CONFIG_REED_SOLOMON_DEC8=y
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_BCH=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
# CONFIG_DMA_API_DEBUG is not set
CONFIG_SGL_ALLOC=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_LRU_CACHE=m
CONFIG_CLZ_TAB=y
CONFIG_CORDIC=m
# CONFIG_DDR is not set
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=m
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_SBITMAP=y
# CONFIG_STRING_SELFTEST is not set

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
CONFIG_BOOT_PRINTK_DELAY=y
CONFIG_DYNAMIC_DEBUG=y

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
CONFIG_FRAME_POINTER=y
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x01f6
CONFIG_MAGIC_SYSRQ_SERIAL=y
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_DEBUG_PAGE_REF is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_VM is not set
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_HAVE_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_KASAN_STACK=1
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_WQ_WATCHDOG is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHED_INFO=y
CONFIG_SCHEDSTATS=y
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_DEBUG_TIMEKEEPING is not set
CONFIG_DEBUG_PREEMPT=y

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_PROVE_LOCKING=y
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_DEBUG_RWSEMS=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_LOCKDEP=y
# CONFIG_DEBUG_LOCKDEP is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
CONFIG_TRACE_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
CONFIG_PROVE_RCU=y
# CONFIG_RCU_PERF_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
CONFIG_FUNCTION_ERROR_INJECTION=y
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_PREEMPTIRQ_TRACEPOINTS=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_PREEMPTIRQ_EVENTS is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_HWLAT_TRACER is not set
# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_TRACER_SNAPSHOT is not set
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_STACK_TRACER is not set
CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_KPROBE_EVENTS=y
# CONFIG_UPROBE_EVENTS is not set
CONFIG_DYNAMIC_EVENTS=y
CONFIG_PROBE_EVENTS=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_HIST_TRIGGERS is not set
# CONFIG_TRACEPOINT_BENCHMARK is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RING_BUFFER_STARTUP_TEST is not set
# CONFIG_PREEMPTIRQ_DELAY_TEST is not set
# CONFIG_TRACE_EVAL_MAP_FILE is not set
CONFIG_TRACING_EVENTS_GPIO=y
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_MEMTEST=y
# CONFIG_BUG_ON_DATA_CORRUPTION is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_UBSAN_ALIGNMENT=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_EARLY_PRINTK_USB_XDBC is not set
CONFIG_X86_PTDUMP_CORE=y
# CONFIG_X86_PTDUMP is not set
# CONFIG_EFI_PGT_DUMP is not set
CONFIG_DEBUG_WX=y
CONFIG_DOUBLEFAULT=y
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
CONFIG_X86_DEBUG_FPU=y
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_FRAME_POINTER=y
# CONFIG_UNWINDER_GUESS is not set

[-- Attachment #4: 20190513dmesg.log --]
[-- Type: application/octet-stream, Size: 57213 bytes --]

[    0.000000] Linux version 5.1.0-rc3+ (root@victoria) (gcc version 8.3.0 (Debian 8.3.0-7)) #1437 SMP PREEMPT Mon May 13 16:09:48 ACST 2019
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000100-0x000000000009f3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI:  /8I945P Pro, BIOS F10 04/06/2006
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3014.535 MHz processor
[    0.008032] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.008041] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.008052] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[    0.008078] MTRR default type: uncachable
[    0.008082] MTRR fixed ranges enabled:
[    0.008086]   00000-9FFFF write-back
[    0.008090]   A0000-BFFFF uncachable
[    0.008094]   C0000-CDFFF write-protect
[    0.008098]   CE000-EFFFF uncachable
[    0.008101]   F0000-FFFFF write-through
[    0.008105] MTRR variable ranges enabled:
[    0.008110]   0 base 000000000 mask F80000000 write-back
[    0.008115]   1 disabled
[    0.008118]   2 disabled
[    0.008121]   3 disabled
[    0.008124]   4 disabled
[    0.008127]   5 disabled
[    0.008130]   6 disabled
[    0.008133]   7 disabled
[    0.009090] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.019847] found SMP MP-table at [mem 0x000f50e0-0x000f50ef]
[    0.031769] initial memory mapped: [mem 0x00000000-0x023fffff]
[    0.031829] BRK [0x02177000, 0x02177fff] PGTABLE
[    0.031847] RAMDISK: [mem 0x7f08d000-0x7ffe7fff]
[    0.031856] Allocated new RAMDISK: [mem 0x360a3000-0x36ffdbcc]
[    0.044504] Move RAMDISK from [mem 0x7f08d000-0x7ffe7bcc] to [mem 0x360a3000-0x36ffdbcc]
[    0.044536] ACPI: Early table checksum verification disabled
[    0.044553] ACPI: RSDP 0x00000000000F6A80 000014 (v00 GBT   )
[    0.044565] ACPI: RSDT 0x000000007FFF3040 000038 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.044581] ACPI: FACP 0x000000007FFF30C0 000074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.044596] ACPI: DSDT 0x000000007FFF3180 003914 (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
[    0.044611] ACPI: FACS 0x000000007FFF0000 000040
[    0.044622] ACPI: MCFG 0x000000007FFF6BC0 00003C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.044634] ACPI: APIC 0x000000007FFF6B00 000068 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.044646] ACPI: SSDT 0x000000007FFF6C40 00015C (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.044657] ACPI: SSDT 0x000000007FFF70D0 000167 (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.044679] ACPI: Local APIC address 0xfee00000
[    0.044688] 1167MB HIGHMEM available.
[    0.044695] 879MB LOWMEM available.
[    0.044701]   mapped low ram: 0 - 36ffe000
[    0.044706]   low ram: 0 - 36ffe000
[    0.044720] BRK [0x02178000, 0x02178fff] PGTABLE
[    0.050552] Zone ranges:
[    0.050565]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.050573]   Normal   [mem 0x0000000001000000-0x0000000036ffdfff]
[    0.050579]   HighMem  [mem 0x0000000036ffe000-0x000000007ffeffff]
[    0.050585] Movable zone start for each node
[    0.050590] Early memory node ranges
[    0.050596]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.050602]   node   0: [mem 0x0000000000100000-0x000000007ffeffff]
[    0.050612] Zeroed struct page in unavailable ranges: 98 pages
[    0.050615] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
[    0.050624] On node 0 totalpages: 524174
[    0.050630]   DMA zone: 36 pages used for memmap
[    0.050633]   DMA zone: 0 pages reserved
[    0.050637]   DMA zone: 3998 pages, LIFO batch:0
[    0.050770]   Normal zone: 1944 pages used for memmap
[    0.050774]   Normal zone: 221182 pages, LIFO batch:63
[    0.057745]   HighMem zone: 298994 pages, LIFO batch:63
[    0.067165] Using APIC driver default
[    0.067352] ACPI: PM-Timer IO Port: 0x408
[    0.067359] ACPI: Local APIC address 0xfee00000
[    0.067371] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.067377] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.067416] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.067435] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.067442] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.067450] ACPI: IRQ0 used by override.
[    0.067454] ACPI: IRQ9 used by override.
[    0.067459] Using ACPI (MADT) for SMP configuration information
[    0.067468] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.067504] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.067512] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.067518] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.067523] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.067534] [mem 0x80000000-0xefffffff] available for PCI devices
[    0.067540] Booting paravirtualized kernel on bare hardware
[    0.067551] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.067583] random: get_random_bytes called from start_kernel+0x7b/0x461 with crng_init=0
[    0.067600] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.067876] percpu: Embedded 30 pages/cpu @(ptrval) s91688 r0 d31192 u122880
[    0.067890] pcpu-alloc: s91688 r0 d31192 u122880 alloc=30*4096
[    0.067895] pcpu-alloc: [0] 0 [0] 1 
[    0.067928] Built 1 zonelists, mobility grouping on.  Total pages: 522194
[    0.067942] Kernel command line: BOOT_IMAGE=/vmlinuz-5.1.0 root=UUID=96c96a61-8615-4715-86d0-09cb8c62638c ro noresume
[    0.068352] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.068523] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.068530] BRK [0x02179000, 0x02179fff] PGTABLE
[    0.068558] Initializing CPU#0
[    0.068579] Initializing HighMem for node 0 (00036ffe:0007fff0)
[    0.323626] Initializing Movable for node 0 (00000000:00000000)
[    0.330027] Memory: 2035804K/2096696K available (6475K kernel code, 618K rwdata, 2500K rodata, 620K init, 7496K bss, 60892K reserved, 0K cma-reserved, 1195976K highmem)
[    0.330045] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                 cpu_entry : 0xff800000 - 0xff931000   (1220 kB)
                   pkmap   : 0xff000000 - 0xff400000   (4096 kB)
                   vmalloc : 0xf77fe000 - 0xfeffe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf6ffe000   ( 879 MB)
                     .init : 0xc1979000 - 0xc1a14000   ( 620 kB)
                     .data : 0xc1652ed4 - 0xc1966880   (3150 kB)
                     .text : 0xc1000000 - 0xc1652ed4   (6475 kB)
[    0.330053] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.330858] Running RCU self tests
[    0.330865] rcu: Preemptible hierarchical RCU implementation.
[    0.330870] rcu: 	RCU lockdep checking is enabled.
[    0.330876] rcu: 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[    0.330882] 	Tasks RCU enabled.
[    0.330888] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.330893] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.331445] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[    0.331772] CPU 0 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.335259] Console: colour VGA+ 80x25
[    0.340958] printk: console [tty0] enabled
[    0.341023] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.341105] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.341164] ... MAX_LOCK_DEPTH:          48
[    0.341223] ... MAX_LOCKDEP_KEYS:        8191
[    0.341284] ... CLASSHASH_SIZE:          4096
[    0.341344] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.341404] ... MAX_LOCKDEP_CHAINS:      65536
[    0.341464] ... CHAINHASH_SIZE:          32768
[    0.341525]  memory used by lock dependency info: 4987 kB
[    0.341589]  per task-struct memory footprint: 1344 bytes
[    0.341654] ------------------------
[    0.341711] | Locking API testsuite:
[    0.341768] ----------------------------------------------------------------------------
[    0.341849]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.341931]   --------------------------------------------------------------------------
[    0.342018]                      A-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.348354]                  A-B-B-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.355292]              A-B-B-C-C-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.362889]              A-B-C-A-B-C deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.370453]          A-B-B-C-C-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.378736]          A-B-C-D-B-D-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.387026]          A-B-C-D-B-C-D-A deadlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.395355]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.401616]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.407518]   --------------------------------------------------------------------------
[    0.407600]               recursive read-lock:             |  ok  |             |  ok  |
[    0.409515]            recursive read-lock #2:             |  ok  |             |  ok  |
[    0.411357]             mixed read-write-lock:             |  ok  |             |  ok  |
[    0.413178]             mixed write-read-lock:             |  ok  |             |  ok  |
[    0.414998]   mixed read-lock/lock-write ABBA:             |FAILED|             |  ok  |
[    0.416944]    mixed read-lock/lock-read ABBA:             |  ok  |             |  ok  |
[    0.418964]  mixed write-lock/lock-write ABBA:             |  ok  |             |  ok  |
[    0.421027]   --------------------------------------------------------------------------
[    0.421192]      hard-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.423902]      soft-irqs-on + irq-safe-A/12:  ok  |  ok  |  ok  |
[    0.426617]      hard-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.429338]      soft-irqs-on + irq-safe-A/21:  ok  |  ok  |  ok  |
[    0.432022]        sirq-safe-A => hirqs-on/12:  ok  |  ok  |  ok  |
[    0.434706]        sirq-safe-A => hirqs-on/21:  ok  |  ok  |  ok  |
[    0.437412]          hard-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.440075]          soft-safe-A + irqs-on/12:  ok  |  ok  |  ok  |
[    0.442780]          hard-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.445503]          soft-safe-A + irqs-on/21:  ok  |  ok  |  ok  |
[    0.448243]     hard-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.451249]     soft-safe-A + unsafe-B #1/123:  ok  |  ok  |  ok  |
[    0.454216]     hard-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.457184]     soft-safe-A + unsafe-B #1/132:  ok  |  ok  |  ok  |
[    0.460138]     hard-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.463090]     soft-safe-A + unsafe-B #1/213:  ok  |  ok  |  ok  |
[    0.466088]     hard-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.469052]     soft-safe-A + unsafe-B #1/231:  ok  |  ok  |  ok  |
[    0.472022]     hard-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.474830]     soft-safe-A + unsafe-B #1/312:  ok  |  ok  |  ok  |
[    0.477609]     hard-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.480571]     soft-safe-A + unsafe-B #1/321:  ok  |  ok  |  ok  |
[    0.483523]     hard-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.486477]     soft-safe-A + unsafe-B #2/123:  ok  |  ok  |  ok  |
[    0.489475]     hard-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.492480]     soft-safe-A + unsafe-B #2/132:  ok  |  ok  |  ok  |
[    0.495499]     hard-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.498500]     soft-safe-A + unsafe-B #2/213:  ok  |  ok  |  ok  |
[    0.501491]     hard-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.507224]     soft-safe-A + unsafe-B #2/231:  ok  |  ok  |  ok  |
[    0.510212]     hard-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.513161]     soft-safe-A + unsafe-B #2/312:  ok  |  ok  |  ok  |
[    0.516158]     hard-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.519149]     soft-safe-A + unsafe-B #2/321:  ok  |  ok  |  ok  |
[    0.522168]       hard-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.525157]       soft-irq lock-inversion/123:  ok  |  ok  |  ok  |
[    0.528124]       hard-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.531088]       soft-irq lock-inversion/132:  ok  |  ok  |  ok  |
[    0.534081]       hard-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.537036]       soft-irq lock-inversion/213:  ok  |  ok  |  ok  |
[    0.540017]       hard-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.542987]       soft-irq lock-inversion/231:  ok  |  ok  |  ok  |
[    0.545994]       hard-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.548984]       soft-irq lock-inversion/312:  ok  |  ok  |  ok  |
[    0.551977]       hard-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.554951]       soft-irq lock-inversion/321:  ok  |  ok  |  ok  |
[    0.557936]       hard-irq read-recursion/123:  ok  |
[    0.558966]       soft-irq read-recursion/123:  ok  |
[    0.560003]       hard-irq read-recursion/132:  ok  |
[    0.561041]       soft-irq read-recursion/132:  ok  |
[    0.562087]       hard-irq read-recursion/213:  ok  |
[    0.563125]       soft-irq read-recursion/213:  ok  |
[    0.564160]       hard-irq read-recursion/231:  ok  |
[    0.565194]       soft-irq read-recursion/231:  ok  |
[    0.566228]       hard-irq read-recursion/312:  ok  |
[    0.567257]       soft-irq read-recursion/312:  ok  |
[    0.568293]       hard-irq read-recursion/321:  ok  |
[    0.569332]       soft-irq read-recursion/321:  ok  |
[    0.570376]   --------------------------------------------------------------------------
[    0.570458]   | Wound/wait tests |
[    0.570514]   ---------------------
[    0.570570]                   ww api failures:  ok  |  ok  |  ok  |
[    0.573455]                ww contexts mixing:  ok  |  ok  |
[    0.575365]              finishing ww context:  ok  |  ok  |  ok  |  ok  |
[    0.579096]                locking mismatches:  ok  |  ok  |  ok  |
[    0.582007]                  EDEADLK handling:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.591946]            spinlock nest unlocked:  ok  |
[    0.592890]   -----------------------------------------------------
[    0.592958]                                  |block | try  |context|
[    0.593025]   -----------------------------------------------------
[    0.593093]                           context:  ok  |  ok  |  ok  |
[    0.596074]                               try:  ok  |  ok  |  ok  |
[    0.598839]                             block:  ok  |  ok  |  ok  |
[    0.601649]                          spinlock:  ok  |  ok  |  ok  |
[    0.604775] -------------------------------------------------------
[    0.604846] Good, all 261 testcases passed! |
[    0.604906] ---------------------------------
[    0.604982] ACPI: Core revision 20190215
[    0.605317] APIC: Switch to symmetric I/O mode setup
[    0.605383] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.606048] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.625314] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b73e7fc536, max_idle_ns: 440795283902 ns
[    0.625454] Calibrating delay loop (skipped), value calculated using timer frequency.. 6029.07 BogoMIPS (lpj=12058140)
[    0.625552] pid_max: default: 32768 minimum: 301
[    0.625749] LSM: Security Framework initializing
[    0.625848] Yama: becoming mindful.
[    0.625939] SELinux:  Initializing.
[    0.626083] *** VALIDATE SELinux ***
[    0.626145] TOMOYO Linux initialized
[    0.626256] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.626333] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.627124] *** VALIDATE proc ***
[    0.627495] *** VALIDATE cgroup1 ***
[    0.627557] *** VALIDATE cgroup2 ***
[    0.627674] mce: CPU supports 4 MCE banks
[    0.627768] mce: CPU0: Thermal monitoring enabled (TM1)
[    0.627839] process: using mwait in idle threads
[    0.627913] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128
[    0.627982] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0
[    0.628051] Spectre V2 : Mitigation: Full generic retpoline
[    0.628117] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.628207] Speculative Store Bypass: Vulnerable
[    0.628269] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
[    0.628573] Freeing SMP alternatives memory: 28K
[    0.629418] smpboot: CPU0: Intel(R) Pentium(R) D CPU 3.00GHz (family: 0xf, model: 0x4, stepping: 0x4)
[    0.649468] Performance Events: Netburst events, Netburst P4/Xeon PMU driver.
[    0.649572] ... version:                0
[    0.649635] ... bit width:              40
[    0.649696] ... generic registers:      18
[    0.649757] ... value mask:             000000ffffffffff
[    0.649824] ... max period:             0000007fffffffff
[    0.649891] ... fixed-purpose events:   0
[    0.649952] ... event mask:             000000000003ffff
[    0.657442] rcu: Hierarchical SRCU implementation.
[    0.669575] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.677469] smp: Bringing up secondary CPUs ...
[    0.709793] CPU 1 irqstacks, hard=(ptrval) soft=(ptrval)
[    0.709803] x86: Booting SMP configuration:
[    0.709884] .... node  #0, CPUs:      #1
[    0.277616] Initializing CPU#1
[    0.721821] smp: Brought up 1 node, 2 CPUs
[    0.721821] smpboot: Max logical packages: 1
[    0.721821] smpboot: Total of 2 processors activated (12058.14 BogoMIPS)
[    0.725968] devtmpfs: initialized
[    0.729907] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes)
[    0.730154] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.730263] futex hash table entries: 512 (order: 4, 65536 bytes)
[    0.730852] pinctrl core: initialized pinctrl subsystem
[    0.731798] NET: Registered protocol family 16
[    0.732454] audit: initializing netlink subsys (disabled)
[    0.732653] audit: type=2000 audit(1557730465.124:1): state=initialized audit_enabled=0 res=1
[    0.733796] cpuidle: using governor ladder
[    0.733935] cpuidle: using governor menu
[    0.734136] ACPI: bus type PCI registered
[    0.734477] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.734577] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.734652] PCI: Using MMCONFIG for extended config space
[    0.734720] PCI: Using configuration type 1 for base access
[    0.740607] HugeTLB registered 4.00 MiB page size, pre-allocated 0 pages
[    0.741839] ACPI: Added _OSI(Module Device)
[    0.741909] ACPI: Added _OSI(Processor Device)
[    0.741976] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.742042] ACPI: Added _OSI(Processor Aggregator Device)
[    0.742113] ACPI: Added _OSI(Linux-Dell-Video)
[    0.742181] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.742253] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.753772] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.761083] ACPI: Dynamic OEM Table Load:
[    0.761164] ACPI: SSDT 0x00000000F41D9E00 000087 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.762916] ACPI: Interpreter enabled
[    0.763068] ACPI: (supports S0 S1 S4 S5)
[    0.763133] ACPI: Using IOAPIC for interrupt routing
[    0.763300] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.764214] ACPI: Enabled 7 GPEs in block 00 to 1F
[    0.789980] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.790088] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.790427] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
[    0.790435] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.790440] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.790446] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.790451] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[    0.790456] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff window] (ignored)
[    0.790461] PCI: root bus 00: using default resources
[    0.791143] PCI host bridge to bus 0000:00
[    0.791211] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.791286] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.791370] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.791486] pci 0000:00:00.0: [8086:2770] type 00 class 0x060000
[    0.792028] pci 0000:00:01.0: [8086:2771] type 01 class 0x060400
[    0.792166] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.792669] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.792711] pci 0000:00:1b.0: reg 0x10: [mem 0xe4100000-0xe4103fff 64bit]
[    0.792857] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.793436] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.793609] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.794101] pci 0000:00:1c.2: [8086:27d4] type 01 class 0x060400
[    0.794270] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.794750] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.794823] pci 0000:00:1d.0: reg 0x20: [io  0xbc00-0xbc1f]
[    0.795300] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.795372] pci 0000:00:1d.1: reg 0x20: [io  0xb000-0xb01f]
[    0.795842] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.795916] pci 0000:00:1d.2: reg 0x20: [io  0xb400-0xb41f]
[    0.796407] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.796480] pci 0000:00:1d.3: reg 0x20: [io  0xb800-0xb81f]
[    0.796960] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.796994] pci 0000:00:1d.7: reg 0x10: [mem 0xe4104000-0xe41043ff]
[    0.797579] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.798127] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
[    0.798278] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.798299] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.798394] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.798474] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.798561] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.799095] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
[    0.799126] pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
[    0.799142] pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
[    0.799158] pci 0000:00:1f.1: reg 0x18: [io  0x0000-0x0007]
[    0.799174] pci 0000:00:1f.1: reg 0x1c: [io  0x0000-0x0003]
[    0.799190] pci 0000:00:1f.1: reg 0x20: [io  0xf000-0xf00f]
[    0.799223] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.799302] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.799376] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.799452] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.799949] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
[    0.799980] pci 0000:00:1f.2: reg 0x10: [io  0xd000-0xd007]
[    0.799995] pci 0000:00:1f.2: reg 0x14: [io  0xd400-0xd403]
[    0.800010] pci 0000:00:1f.2: reg 0x18: [io  0xd800-0xd807]
[    0.800025] pci 0000:00:1f.2: reg 0x1c: [io  0xdc00-0xdc03]
[    0.800040] pci 0000:00:1f.2: reg 0x20: [io  0xe000-0xe00f]
[    0.800056] pci 0000:00:1f.2: reg 0x24: [mem 0xe4107000-0xe41073ff]
[    0.800121] pci 0000:00:1f.2: PME# supported from D3hot
[    0.800557] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
[    0.800642] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.801224] pci 0000:01:00.0: [1002:68f9] type 00 class 0x030000
[    0.801270] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.801292] pci 0000:01:00.0: reg 0x18: [mem 0xe1000000-0xe101ffff 64bit]
[    0.801307] pci 0000:01:00.0: reg 0x20: [io  0x8000-0x80ff]
[    0.801333] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.801453] pci 0000:01:00.0: supports D1 D2
[    0.801676] pci 0000:01:00.1: [1002:aa68] type 00 class 0x040300
[    0.801720] pci 0000:01:00.1: reg 0x10: [mem 0xe1020000-0xe1023fff 64bit]
[    0.801866] pci 0000:01:00.1: supports D1 D2
[    0.802151] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.802225] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
[    0.802232] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.802242] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.802382] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.802454] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
[    0.802462] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.802473] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.802634] pci 0000:03:00.0: [14e4:169d] type 00 class 0x020000
[    0.802688] pci 0000:03:00.0: reg 0x10: [mem 0xe4000000-0xe400ffff 64bit]
[    0.802766] pci 0000:03:00.0: reg 0x30: [mem 0x21000000-0x2100ffff pref]
[    0.802915] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.803159] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.803270] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.803341] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.803349] pci 0000:00:1c.2:   bridge window [mem 0xe4000000-0xe40fffff]
[    0.803360] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.803395] pci_bus 0000:04: extended config space not accessible
[    0.803594] pci 0000:04:06.0: [1283:8212] type 00 class 0x018000
[    0.803623] pci 0000:04:06.0: reg 0x10: [io  0x9010-0x9017]
[    0.803640] pci 0000:04:06.0: reg 0x14: [io  0x9400-0x9403]
[    0.803657] pci 0000:04:06.0: reg 0x18: [io  0x9810-0x9817]
[    0.803673] pci 0000:04:06.0: reg 0x1c: [io  0x9c00-0x9c03]
[    0.803689] pci 0000:04:06.0: reg 0x20: [io  0xa000-0xa00f]
[    0.803718] pci 0000:04:06.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.803944] pci 0000:04:07.0: [104c:8025] type 00 class 0x0c0010
[    0.803974] pci 0000:04:07.0: reg 0x10: [mem 0xe3004000-0xe30047ff]
[    0.803992] pci 0000:04:07.0: reg 0x14: [mem 0xe3000000-0xe3003fff]
[    0.804121] pci 0000:04:07.0: supports D1 D2
[    0.804127] pci 0000:04:07.0: PME# supported from D0 D1 D2 D3hot
[    0.804353] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
[    0.804433] pci 0000:00:1e.0:   bridge window [io  0x9000-0xafff]
[    0.804441] pci 0000:00:1e.0:   bridge window [mem 0xe2000000-0xe3ffffff]
[    0.804453] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.804459] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.804497] pci_bus 0000:00: on NUMA node 0
[    0.807248] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 9 10 11 12 14 15), disabled.
[    0.807675] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15), disabled.
[    0.808072] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15), disabled.
[    0.808467] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15), disabled.
[    0.808862] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.809257] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.809683] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 *10 11 12 14 15), disabled.
[    0.810083] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15), disabled.
[    0.810991] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.810991] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.813443] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.813515] vgaarb: loaded
[    0.813980] EDAC MC: Ver: 3.0.0
[    0.814744] PCI: Using ACPI for IRQ routing
[    0.818148] PCI: pci_cache_line_size set to 64 bytes
[    0.818250] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[    0.818262] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[    0.820250] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.820362] hpet clockevent registered
[    0.820382] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.820464] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.820536] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.822645] clocksource: Switched to clocksource tsc-early
[    0.869096] VFS: Disk quotas dquot_6.6.0
[    0.869228] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.869432] *** VALIDATE hugetlbfs ***
[    0.869947] pnp: PnP ACPI init
[    0.870809] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.870903] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.870980] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.871054] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.871184] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.871348] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.872443] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.873514] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.873711] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.874046] system 00:05: [io  0x0400-0x04bf] could not be reserved
[    0.874141] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.875271] system 00:06: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.875364] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.876412] system 00:07: [mem 0x000d1a00-0x000d3fff] has been reserved
[    0.876495] system 00:07: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.876577] system 00:07: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.876657] system 00:07: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.876736] system 00:07: [mem 0x7fff0000-0x7fffffff] could not be reserved
[    0.876816] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.876896] system 00:07: [mem 0x00100000-0x7ffeffff] could not be reserved
[    0.876976] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.877055] system 00:07: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.877136] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.877214] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.877292] system 00:07: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.877370] system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
[    0.877447] system 00:07: [mem 0x000e0000-0x000effff] has been reserved
[    0.877539] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.877566] pnp: PnP ACPI: found 8 devices
[    0.922831] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.922940] pci 0000:03:00.0: can't claim BAR 6 [mem 0x21000000-0x2100ffff pref]: no compatible bridge window
[    0.923060] pci 0000:01:00.0: BAR 6: assigned [mem 0xe0000000-0xe001ffff pref]
[    0.923148] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.923219] pci 0000:00:01.0:   bridge window [io  0x8000-0x8fff]
[    0.923295] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xe1ffffff]
[    0.923373] pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.923464] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.923533] pci 0000:00:1c.0:   bridge window [io  0x7000-0x7fff]
[    0.923610] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.923709] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.923806] pci 0000:03:00.0: BAR 6: assigned [mem 0xe4010000-0xe401ffff pref]
[    0.923892] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.923961] pci 0000:00:1c.2:   bridge window [io  0x1000-0x1fff]
[    0.924038] pci 0000:00:1c.2:   bridge window [mem 0xe4000000-0xe40fffff]
[    0.924117] pci 0000:00:1c.2:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.924213] pci 0000:04:06.0: BAR 6: assigned [mem 0xe2000000-0xe201ffff pref]
[    0.924299] pci 0000:00:1e.0: PCI bridge to [bus 04]
[    0.924368] pci 0000:00:1e.0:   bridge window [io  0x9000-0xafff]
[    0.924446] pci 0000:00:1e.0:   bridge window [mem 0xe2000000-0xe3ffffff]
[    0.924532] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.924538] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.924543] pci_bus 0000:01: resource 0 [io  0x8000-0x8fff]
[    0.924547] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]
[    0.924552] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.924557] pci_bus 0000:02: resource 0 [io  0x7000-0x7fff]
[    0.924562] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
[    0.924567] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.924571] pci_bus 0000:03: resource 0 [io  0x1000-0x1fff]
[    0.924576] pci_bus 0000:03: resource 1 [mem 0xe4000000-0xe40fffff]
[    0.924581] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.924586] pci_bus 0000:04: resource 0 [io  0x9000-0xafff]
[    0.924590] pci_bus 0000:04: resource 1 [mem 0xe2000000-0xe3ffffff]
[    0.924595] pci_bus 0000:04: resource 4 [io  0x0000-0xffff]
[    0.924599] pci_bus 0000:04: resource 5 [mem 0x00000000-0xffffffff]
[    0.925019] NET: Registered protocol family 2
[    0.925956] tcp_listen_portaddr_hash hash table entries: 512 (order: 2, 20480 bytes)
[    0.926094] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.926217] TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
[    0.926921] TCP: Hash tables configured (established 8192 bind 8192)
[    0.927132] UDP hash table entries: 512 (order: 3, 40960 bytes)
[    0.927293] UDP-Lite hash table entries: 512 (order: 3, 40960 bytes)
[    0.927773] NET: Registered protocol family 1
[    0.931830] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.932167] PCI: CLS 32 bytes, default 64
[    0.932559] Unpacking initramfs...
[    1.495446] Freeing initrd memory: 15724K
[    1.498412] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    1.599126] bounce: pool size: 64 pages
[    1.599248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.603782] io scheduler mq-deadline registered
[    1.603850] io scheduler kyber registered
[    1.608096] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.628814] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    1.630660] Linux agpgart interface v0.103
[    1.632261] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.636166] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.636571] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.637322] mousedev: PS/2 mouse device common for all mice
[    1.637732] rtc_cmos 00:01: RTC can wake from S4
[    1.638208] rtc_cmos 00:01: registered as rtc0
[    1.638411] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    1.638531] intel_pstate: CPU ID not supported
[    1.639049] NET: Registered protocol family 10
[    1.640404] Segment Routing with IPv6
[    1.640526] mip6: Mobile IPv6
[    1.640663] NET: Registered protocol family 17
[    1.640742] mpls_gso: MPLS GSO support
[    1.641579] microcode: sig=0xf44, pf=0x10, revision=0x6
[    1.641983] microcode: Microcode Update Driver: v2.2.
[    1.641994] Using IPI No-Shortcut mode
[    1.642164] sched_clock: Marking stable (1368340625, 273616996)->(1751668643, -109711022)
[    1.643103] registered taskstats version 1
[    1.644672] rtc_cmos 00:01: setting system clock to 2019-05-13T06:54:26 UTC (1557730466)
[    1.645702] Freeing unused kernel image memory: 620K
[    1.653651] Write protecting kernel text and read-only data: 9008k
[    1.653728] Run /init as init process
[    1.661746] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.900572] udevd[91]: starting version 3.2.7
[    1.902660] random: udevd: uninitialized urandom read (16 bytes read)
[    1.902888] random: udevd: uninitialized urandom read (16 bytes read)
[    1.907021] udevd[92]: starting eudev-3.2.7
[    1.990974] random: udevd: uninitialized urandom read (16 bytes read)
[    2.012716] pps_core: LinuxPPS API ver. 1 registered
[    2.012792] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.013650] PTP clock support registered
[    2.015325] tg3.c:v3.137 (May 11, 2014)
[    2.022038] ACPI: bus type USB registered
[    2.022229] usbcore: registered new interface driver usbfs
[    2.022441] usbcore: registered new interface driver hub
[    2.022643] usbcore: registered new device driver usb
[    2.024168] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.025076] uhci_hcd: USB Universal Host Controller Interface driver
[    2.026890] ehci-pci: EHCI PCI platform driver
[    2.027711] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    2.027988] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    2.032205] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    2.032330] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe4104000
[    2.033223] SCSI subsystem initialized
[    2.045188] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.045800] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    2.047379] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.01
[    2.047533] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.047623] usb usb1: Product: EHCI Host Controller
[    2.047696] usb usb1: Manufacturer: Linux 5.1.0-rc3+ ehci_hcd
[    2.047774] usb usb1: SerialNumber: 0000:00:1d.7
[    2.049324] hub 1-0:1.0: USB hub found
[    2.049628] hub 1-0:1.0: 8 ports detected
[    2.055544] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    2.055650] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.055756] uhci_hcd 0000:00:1d.0: detected 2 ports
[    2.055871] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
[    2.056479] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
[    2.056582] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.056673] usb usb2: Product: UHCI Host Controller
[    2.056742] usb usb2: Manufacturer: Linux 5.1.0-rc3+ uhci_hcd
[    2.056817] usb usb2: SerialNumber: 0000:00:1d.0
[    2.057307] libata version 3.00 loaded.
[    2.057677] hub 2-0:1.0: USB hub found
[    2.057820] hub 2-0:1.0: 2 ports detected
[    2.059137] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    2.059231] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    2.059340] uhci_hcd 0000:00:1d.1: detected 2 ports
[    2.059448] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
[    2.061749] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
[    2.061851] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.061938] usb usb3: Product: UHCI Host Controller
[    2.062008] usb usb3: Manufacturer: Linux 5.1.0-rc3+ uhci_hcd
[    2.062081] usb usb3: SerialNumber: 0000:00:1d.1
[    2.063980] hub 3-0:1.0: USB hub found
[    2.065573] hub 3-0:1.0: 2 ports detected
[    2.068074] pata_it821x: controller in pass through mode.
[    2.070859] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    2.070962] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    2.073398] tg3 0000:03:00.0 eth0: Tigon3 [partno(BCM95789) rev 4101] (PCI Express) MAC address 00:14:85:ee:bc:c5
[    2.074071] tg3 0000:03:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[    2.074174] tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[    2.074266] tg3 0000:03:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[    2.075072] uhci_hcd 0000:00:1d.2: detected 2 ports
[    2.075224] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
[    2.078613] ata_piix 0000:00:1f.1: version 2.13
[    2.079431] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
[    2.079530] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.079615] usb usb4: Product: UHCI Host Controller
[    2.079683] usb usb4: Manufacturer: Linux 5.1.0-rc3+ uhci_hcd
[    2.079753] usb usb4: SerialNumber: 0000:00:1d.2
[    2.081047] hub 4-0:1.0: USB hub found
[    2.082285] hub 4-0:1.0: 2 ports detected
[    2.083525] scsi host0: pata_it821x
[    2.089587] scsi host1: ata_piix
[    2.097628] scsi host2: pata_it821x
[    2.097669] scsi host3: ata_piix
[    2.098032] ata1: PATA max UDMA/133 cmd 0x9010 ctl 0x9400 bmdma 0xa000 irq 22
[    2.098086] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    2.098116] ata2: PATA max UDMA/133 cmd 0x9810 ctl 0x9c00 bmdma 0xa008 irq 22
[    2.098189] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    2.101110] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    2.101745] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    2.101883] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    2.101990] uhci_hcd 0000:00:1d.3: detected 2 ports
[    2.102133] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
[    2.105710] firewire_ohci 0000:04:07.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    2.106839] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.01
[    2.106940] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.107028] usb usb5: Product: UHCI Host Controller
[    2.107096] usb usb5: Manufacturer: Linux 5.1.0-rc3+ uhci_hcd
[    2.107167] usb usb5: SerialNumber: 0000:00:1d.3
[    2.108496] hub 5-0:1.0: USB hub found
[    2.108611] hub 5-0:1.0: 2 ports detected
[    2.110229] scsi host4: ata_piix
[    2.110889] scsi host5: ata_piix
[    2.111255] ata5: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 19
[    2.111337] ata6: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 19
[    2.276718] ata3.00: HPA detected: current 625140335, native 625142448
[    2.276856] ata3.00: ATA-8: WDC WD3200AAJB-00WGA0, 00.02C01, max UDMA/100
[    2.276937] ata3.00: 625140335 sectors, multi 16: LBA48 
[    2.288045] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A103, max UDMA/33
[    2.299142] ata1.01: ATA-6: SAMSUNG SP4002H, QU100-57, max UDMA/100
[    2.299230] ata1.01: 78242976 sectors, multi 0: LBA 
[    2.332506] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A103 PQ: 0 ANSI: 5
[    2.365640] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG SP4002H  0-57 PQ: 0 ANSI: 5
[    2.367063] scsi 1:0:0:0: Direct-Access     ATA      WDC WD3200AAJB-0 2C01 PQ: 0 ANSI: 5
[    2.525682] tsc: Refined TSC clocksource calibration: 3014.488 MHz
[    2.525819] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b73bb45a4a, max_idle_ns: 440795214953 ns
[    2.537397] clocksource: Switched to clocksource tsc
[    2.590465] sr 0:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.590566] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.593487] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    2.595870] sd 1:0:0:0: [sdb] 625140335 512-byte logical blocks: (320 GB/298 GiB)
[    2.596270] sd 0:0:1:0: [sda] 78242976 512-byte logical blocks: (40.1 GB/37.3 GiB)
[    2.596432] sd 0:0:1:0: [sda] Write Protect is off
[    2.596507] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    2.596633] sd 1:0:0:0: [sdb] Write Protect is off
[    2.596703] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.596771] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.596995] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.598570] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    2.599352] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    2.599621] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    2.622509] firewire_core 0000:04:07.0: created device fw0: GUID 0014855600ed7063, S800
[    2.661112]  sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 >
[    2.661487] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    2.661570] ata1.01: BMDMA stat 0x4
[    2.661645] ata1.01: failed command: READ DMA
[    2.661718] ata1.01: cmd c8/00:08:f0:8f:b5/00:00:00:00:00/f1 tag 0 dma 4096 in
                        res 51/84:00:f7:8f:b5/00:00:00:00:00/f1 Emask 0x10 (ATA bus error)
[    2.661851] ata1.01: status: { DRDY ERR }
[    2.661917] ata1.01: error: { ICRC ABRT }
[    2.662010] ata1: soft resetting link
[    2.666060] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.869794] ata1.00: configured for UDMA/33
[    2.872671] ata1.01: configured for UDMA/100
[    2.875054] ata1: EH complete
[    2.977283] random: fast init done
[    2.989503] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    2.989586] ata1.01: BMDMA stat 0x4
[    2.989649] ata1.01: failed command: READ DMA
[    2.989719] ata1.01: cmd c8/00:08:f0:8f:b5/00:00:00:00:00/f1 tag 0 dma 4096 in
                        res 51/84:00:f7:8f:b5/00:00:00:00:00/f1 Emask 0x10 (ATA bus error)
[    2.989854] ata1.01: status: { DRDY ERR }
[    2.989917] ata1.01: error: { ICRC ABRT }
[    2.990010] ata1: soft resetting link
[    3.171664] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[    3.197796] ata1.00: configured for UDMA/33
[    3.200675] ata1.01: configured for UDMA/100
[    3.202981] ata1: EH complete
[    3.225483] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    3.225562] ata1.01: BMDMA stat 0x4
[    3.225625] ata1.01: failed command: READ DMA
[    3.225694] ata1.01: cmd c8/00:08:f0:8f:b5/00:00:00:00:00/f1 tag 0 dma 4096 in
                        res 51/84:00:f7:8f:b5/00:00:00:00:00/f1 Emask 0x10 (ATA bus error)
[    3.225827] ata1.01: status: { DRDY ERR }
[    3.225890] ata1.01: error: { ICRC ABRT }
[    3.225980] ata1: soft resetting link
[    3.433999] ata1.00: configured for UDMA/33
[    3.436877] ata1.01: configured for UDMA/100
[    3.439184] ata1: EH complete
[    3.493478] ata1.01: limiting speed to UDMA/66:PIO4
[    3.493556] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[    3.493631] ata1.01: BMDMA stat 0x4
[    3.493693] ata1.01: failed command: READ DMA
[    3.493763] ata1.01: cmd c8/00:08:f0:8f:b5/00:00:00:00:00/f1 tag 0 dma 4096 in
                        res 51/84:00:f7:8f:b5/00:00:00:00:00/f1 Emask 0x10 (ATA bus error)
[    3.493896] ata1.01: status: { DRDY ERR }
[    3.493960] ata1.01: error: { ICRC ABRT }
[    3.494051] ata1: soft resetting link
[    3.701802] ata1.00: configured for UDMA/33
[    3.704681] ata1.01: configured for UDMA/66
[    3.706989] ata1: EH complete
[    3.779884]  sda: sda1 sda2 < sda5 sda6 sda7 > sda3
[    3.813339] sd 0:0:1:0: [sda] Attached SCSI disk
[    3.813394] sda: detected capacity change from 0 to 40060403712
[    6.574799] random: crng init done
[    6.661957] EXT4-fs (sdb7): mounting ext3 file system using the ext4 subsystem
[    6.700688] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[    6.998434] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[   11.312117] udevd[361]: starting version 3.2.7
[   12.442156] udevd[361]: starting eudev-3.2.7
[   13.122811] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[   13.122956] ACPI: Power Button [PWRB]
[   13.123332] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[   13.125560] ACPI: Power Button [PWRF]
[   13.515014] intel_rng: FWH not detected
[   13.666936] input: PC Speaker as /devices/platform/pcspkr/input/input5
[   14.008062] leds_ss4200: no LED devices found
[   14.377849] iTCO_vendor_support: vendor-support=0
[   14.474769] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   14.474964] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
[   14.476119] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.757037] Error: Driver 'pcspkr' is already registered, aborting...
[   16.621099] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[   17.113026] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input6
[   17.909344] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC882: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   17.909542] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   17.909635] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   17.909722] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   17.909807] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[   17.909883] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   17.909957] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   17.910037] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   17.910114] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   17.910186] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[   17.910257] snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
[   17.939251] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[   17.939686] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[   17.940094] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   17.940501] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   17.940936] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   17.941355] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   17.941862] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   17.942352] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   17.942773] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   22.215668] [drm] radeon kernel modesetting enabled.
[   22.216831] radeon 0000:01:00.0: vgaarb: deactivate vga console
[   22.224416] Console: switching to colour dummy device 80x25
[   22.228329] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68F9 0x1458:0x22B3 0x00).
[   22.228591] resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than pnp 00:07 [mem 0x000d1a00-0x000d3fff]
[   22.228673] caller pci_map_rom+0x56/0x15e mapping multiple BARs
[   22.228705] radeon 0000:01:00.0: No more image in the PCI ROM
[   22.228879] ATOM BIOS: GV
[   22.229119] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   22.229162] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   22.229205] [drm] Detected VRAM RAM=1024M, BAR=256M
[   22.229229] [drm] RAM width 64bits DDR
[   22.234139] [TTM] Zone  kernel: Available graphics memory: 428100 kiB
[   22.234217] [TTM] Zone highmem: Available graphics memory: 1026088 kiB
[   22.234249] [TTM] Initializing pool allocator
[   22.234314] [TTM] Initializing DMA pool allocator
[   22.234813] [drm] radeon: 1024M of VRAM memory ready
[   22.234845] [drm] radeon: 1024M of GTT memory ready.
[   22.234955] [drm] Loading CEDAR Microcode
[   22.500414] [drm] Internal thermal controller with fan control
[   22.501300] [drm:radeon_pm_init [radeon]] *ERROR* radeon: dpm initialization failed
[   22.582443] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   22.621750] [drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
[   22.622412] radeon 0000:01:00.0: WB enabled
[   22.622456] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xfca50980
[   22.622511] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x6467033f
[   22.623755] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0x7fa4e4d3
[   22.623836] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   22.623878] [drm] Driver supports precise vblank timestamp query.
[   22.623919] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   22.624392] radeon 0000:01:00.0: radeon: using MSI.
[   22.624629] [drm] radeon: irq initialized.
[   22.641656] [drm] ring test on 0 succeeded in 1 usecs
[   22.641690] [drm] ring test on 3 succeeded in 2 usecs
[   22.817574] [drm] ring test on 5 succeeded in 1 usecs
[   22.817605] [drm] UVD initialized successfully.
[   22.818423] [drm] ib test on ring 0 succeeded in 0 usecs
[   22.818498] [drm] ib test on ring 3 succeeded in 0 usecs
[   23.485763] [drm] ib test on ring 5 succeeded
[   23.491307] [drm] Radeon Display Connectors
[   23.491340] [drm] Connector 0:
[   23.491359] [drm]   HDMI-A-1
[   23.491378] [drm]   HPD2
[   23.491396] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   23.491432] [drm]   Encoders:
[   23.491451] [drm]     DFP1: INTERNAL_UNIPHY1
[   23.491474] [drm] Connector 1:
[   23.491492] [drm]   DVI-I-1
[   23.491510] [drm]   HPD4
[   23.491528] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[   23.491563] [drm]   Encoders:
[   23.491581] [drm]     DFP2: INTERNAL_UNIPHY
[   23.491604] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   23.491628] [drm] Connector 2:
[   23.491646] [drm]   VGA-1
[   23.491664] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[   23.491699] [drm]   Encoders:
[   23.491717] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[   23.548395] [drm] fb mappable at 0xD034D000
[   23.548479] [drm] vram apper at 0xD0000000
[   23.548501] [drm] size 8294400
[   23.548519] [drm] fb depth is 24
[   23.548538] [drm]    pitch is 7680
[   23.549924] fbcon: radeondrmfb (fb0) is primary device
[   23.569580] Console: switching to colour frame buffer device 240x67
[   23.579499] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[   23.593602] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   26.525991] Adding 2200868k swap on /dev/sdb5.  Priority:-2 extents:1 across:2200868k 
[   26.786802] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro,data=ordered
[   28.514754] lp: driver loaded but no devices found
[   28.560631] ppdev: user-space parallel port driver
[   28.702690] Loading iSCSI transport class v2.0-870.
[   28.749602] iscsi: registered transport (tcp)
[   28.887560] fuse init (API version 7.29)
[   28.990003] tun: Universal TUN/TAP device driver, 1.6
[   29.113028] it87: Found IT8712F chip at 0x290, revision 7
[   29.113126] it87: Beeping is supported
[   69.126829] EXT4-fs (sdb1): mounting ext3 file system using the ext4 subsystem
[   69.160717] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[   69.259910] FAT-fs (sdb6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   70.679392] FAT-fs (sdb8): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   70.693563] FAT-fs (sdb9): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[   78.012898] tg3 0000:03:00.0 eth0: Link is up at 100 Mbps, full duplex
[   78.015638] tg3 0000:03:00.0 eth0: Flow control is on for TX and on for RX
[   78.018456] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   86.328024] Process accounting resumed
[  111.928773] elogind-daemon[2500]: New seat seat0.
[  114.067031] nfc: nfc_init: NFC Core ver 0.1
[  114.068468] NET: Registered protocol family 39
[  234.296918] elogind-daemon[2500]: New session 3 of user amarsh04.
[ 1702.566111] perf: interrupt took too long (2528 > 2500), lowering kernel.perf_event_max_sample_rate to 79000

[-- Attachment #5: 20190513cpuinfo.txt --]
[-- Type: text/plain, Size: 1540 bytes --]

processor	: 0
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	: Intel(R) Pentium(R) D CPU 3.00GHz
stepping	: 4
microcode	: 0x6
cpu MHz		: 2800.000
cache size	: 1024 KB
physical id	: 0
siblings	: 2
core id		: 0
cpu cores	: 2
apicid		: 0
initial apicid	: 0
fdiv_bug	: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts cpuid pni dtes64 monitor ds_cpl est cid cx16 xtpr
bugs		: cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf
bogomips	: 6029.07
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:

processor	: 1
vendor_id	: GenuineIntel
cpu family	: 15
model		: 4
model name	: Intel(R) Pentium(R) D CPU 3.00GHz
stepping	: 4
microcode	: 0x6
cpu MHz		: 2800.000
cache size	: 1024 KB
physical id	: 0
siblings	: 2
core id		: 1
cpu cores	: 2
apicid		: 1
initial apicid	: 1
fdiv_bug	: no
f00f_bug	: no
coma_bug	: no
fpu		: yes
fpu_exception	: yes
cpuid level	: 5
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc pebs bts cpuid pni dtes64 monitor ds_cpl est cid cx16 xtpr
bugs		: cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass l1tf
bogomips	: 6029.07
clflush size	: 64
cache_alignment	: 128
address sizes	: 36 bits physical, 48 bits virtual
power management:


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-11 22:06   ` Theodore Ts'o
  2019-05-13  7:45     ` Arthur Marsh
@ 2019-05-13 10:31     ` Arthur Marsh
  2019-05-14  1:59       ` Arthur Marsh
  2019-05-17  9:23     ` Geert Uytterhoeven
  2 siblings, 1 reply; 16+ messages in thread
From: Arthur Marsh @ 2019-05-13 10:31 UTC (permalink / raw)
  To: Theodore Ts'o, Richard Weinberger; +Cc: LKML, linux-ext4

After a git bisect reset and updating to the current Linus git head, the problem no longer occurs.

Thanks for the feedback on the problem that I experienced.

Arthur. 
-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-13 10:31     ` Arthur Marsh
@ 2019-05-14  1:59       ` Arthur Marsh
  2019-05-14 10:42         ` Ondrej Zary
  2019-05-15  2:59         ` Arthur Marsh
  0 siblings, 2 replies; 16+ messages in thread
From: Arthur Marsh @ 2019-05-14  1:59 UTC (permalink / raw)
  To: Theodore Ts'o, Richard Weinberger; +Cc: LKML, linux-ext4

Apologies, I had forgotten to

got bisect - - hard origin/master

I am still seeing the corruption leading to the invalid block error on 5.1.0+ kernels on both my machines.

Arthur. 
-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-14  1:59       ` Arthur Marsh
@ 2019-05-14 10:42         ` Ondrej Zary
  2019-05-15  2:59         ` Arthur Marsh
  1 sibling, 0 replies; 16+ messages in thread
From: Ondrej Zary @ 2019-05-14 10:42 UTC (permalink / raw)
  To: Arthur Marsh; +Cc: Theodore Ts'o, Richard Weinberger, LKML, linux-ext4

On Tuesday 14 May 2019, Arthur Marsh wrote:
> Apologies, I had forgotten to
> 
> got bisect - - hard origin/master
> 
> I am still seeing the corruption leading to the invalid block error on 5.1.0+ kernels on both my machines.
> 
> Arthur. 

I've been probably hit by the same bug. ext3 filesystem on my test machine was corrupted twice with 5.1.0+. Only the corruption was heavier. Some files that were open (e.g. logs) became cros-linked with files that were not used for ages.

-- 
Ondrej Zary

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-14  1:59       ` Arthur Marsh
  2019-05-14 10:42         ` Ondrej Zary
@ 2019-05-15  2:59         ` Arthur Marsh
  2019-05-15  4:57           ` Theodore Ts'o
  1 sibling, 1 reply; 16+ messages in thread
From: Arthur Marsh @ 2019-05-15  2:59 UTC (permalink / raw)
  To: Theodore Ts'o, Richard Weinberger; +Cc: LKML, linux-ext4



On 14 May 2019 11:29:37 am ACST, Arthur Marsh <arthur.marsh@internode.on.net> wrote:
>Apologies, I had forgotten to
>
>git bisect - - hard origin/master
>
>I am still seeing the corruption leading to the invalid block error on
>5.1.0+ kernels on both my machines.
>
>Arthur. 

After the mm commits, the 32 bit kernel on Pentium-D still exhibits the "invalid block" issue when running git gc on the kernel source. 

The 64 bit kernel on Athlon II X4 640 has since the mm commits had less problems running git gc on the kernel source but had an "invalid block" error after a second run of git gc. 

Arthur. 

Arthur. 
-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-15  2:59         ` Arthur Marsh
@ 2019-05-15  4:57           ` Theodore Ts'o
  2019-05-15 12:12             ` Arthur Marsh
  2019-05-17 16:44             ` Geert Uytterhoeven
  0 siblings, 2 replies; 16+ messages in thread
From: Theodore Ts'o @ 2019-05-15  4:57 UTC (permalink / raw)
  To: Arthur Marsh; +Cc: Richard Weinberger, LKML, linux-ext4

Ah, I think I see the problem.  Sorry, this one was my fault.  Does
this fix things for you?

						- Ted

From 0c72924ef346d54e8627440e6d71257aa5b56105 Mon Sep 17 00:00:00 2001
From: Theodore Ts'o <tytso@mit.edu>
Date: Wed, 15 May 2019 00:51:19 -0400
Subject: [PATCH] ext4: fix block validity checks for journal inodes using indirect blocks

Commit 345c0dbf3a30 ("ext4: protect journal inode's blocks using
block_validity") failed to add an exception for the journal inode in
ext4_check_blockref(), which is the function used by ext4_get_branch()
for indirect blocks.  This caused attempts to read from the ext3-style
journals to fail with:

[  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block

Fix this by adding the missing exception check.

Fixes: 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
---
 fs/ext4/block_validity.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
index 8d03550aaae3..8e83741b02e0 100644
--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -277,6 +277,11 @@ int ext4_check_blockref(const char *function, unsigned int line,
 	__le32 *bref = p;
 	unsigned int blk;
 
+	if (ext4_has_feature_journal(inode->i_sb) &&
+	    (inode->i_ino ==
+	     le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum)))
+		return 0;
+
 	while (bref < p+max) {
 		blk = le32_to_cpu(*bref++);
 		if (blk &&
-- 
2.19.1


^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-15  4:57           ` Theodore Ts'o
@ 2019-05-15 12:12             ` Arthur Marsh
  2019-05-16  2:56               ` Theodore Ts'o
  2019-05-17 16:44             ` Geert Uytterhoeven
  1 sibling, 1 reply; 16+ messages in thread
From: Arthur Marsh @ 2019-05-15 12:12 UTC (permalink / raw)
  To: Theodore Ts'o; +Cc: Richard Weinberger, LKML, linux-ext4

[-- Attachment #1: Type: text/plain, Size: 2297 bytes --]



On 15 May 2019 2:27:17 pm ACST, Theodore Ts'o <tytso@mit.edu> wrote:
>Ah, I think I see the problem.  Sorry, this one was my fault.  Does
>this fix things for you?
>
>						- Ted
>
>From 0c72924ef346d54e8627440e6d71257aa5b56105 Mon Sep 17 00:00:00 2001
>From: Theodore Ts'o <tytso@mit.edu>
>Date: Wed, 15 May 2019 00:51:19 -0400
>Subject: [PATCH] ext4: fix block validity checks for journal inodes
>using indirect blocks
>
>Commit 345c0dbf3a30 ("ext4: protect journal inode's blocks using
>block_validity") failed to add an exception for the journal inode in
>ext4_check_blockref(), which is the function used by ext4_get_branch()
>for indirect blocks.  This caused attempts to read from the ext3-style
>journals to fail with:
>
>[  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode
>#8: block 30343695: comm jbd2/sdb7-8: invalid block
>
>Fix this by adding the missing exception check.
>
>Fixes: 345c0dbf3a30 ("ext4: protect journal inode's blocks using
>block_validity")
>Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
>Signed-off-by: Theodore Ts'o <tytso@mit.edu>
>---
> fs/ext4/block_validity.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
>diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
>index 8d03550aaae3..8e83741b02e0 100644
>--- a/fs/ext4/block_validity.c
>+++ b/fs/ext4/block_validity.c
>@@ -277,6 +277,11 @@ int ext4_check_blockref(const char *function,
>unsigned int line,
> 	__le32 *bref = p;
> 	unsigned int blk;
> 
>+	if (ext4_has_feature_journal(inode->i_sb) &&
>+	    (inode->i_ino ==
>+	     le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum)))
>+		return 0;
>+
> 	while (bref < p+max) {
> 		blk = le32_to_cpu(*bref++);
> 		if (blk &&

I have built kernels with the attached patch applied and run git gc on the patched kernels (both the 32 bit kernel on the Pentium-D and the 64 bit kernel on the Athlon II X4 640). 

There were a couple of warnings from other processes being blocked while the git gc was taking place but no filesystem corruption detected. (I ran forced fsck checks on the root filesystems after the git gc runs to check for corruption). 

Thanks for the patch! 

Arthur. 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

[-- Attachment #2: ext4.tmp --]
[-- Type: application/octet-stream, Size: 506 bytes --]

diff --git a/fs/ext4/block_validity.c b/fs/ext4/block_validity.c
index 968f163b5feb..66146a711871 100644
--- a/fs/ext4/block_validity.c
+++ b/fs/ext4/block_validity.c
@@ -276,6 +276,11 @@ int ext4_check_blockref(const char *function, unsigned int line,
 	__le32 *bref = p;
 	unsigned int blk;
 
+	if (ext4_has_feature_journal(inode->i_sb) &&
+	(inode->i_ino ==
+		le32_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_journal_inum)))
+	return 0;
+
 	while (bref < p+max) {
 		blk = le32_to_cpu(*bref++);
 		if (blk &&

[-- Attachment #3: 20190515iucode_tool.log --]
[-- Type: application/octet-stream, Size: 4281 bytes --]

[ 1088.155025] INFO: task iucode_tool:9456 blocked for more than 120 seconds.
[ 1088.155032]       Not tainted 5.1.0+ #3417
[ 1088.155033] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1088.155035] iucode_tool     D    0  9456   9453 0x00004000
[ 1088.155039] Call Trace:
[ 1088.155052]  ? __schedule+0x297/0x690
[ 1088.155055]  ? _raw_spin_lock_irqsave+0x22/0x50
[ 1088.155057]  schedule+0x33/0xc0
[ 1088.155070]  jbd2_log_wait_commit+0x9b/0x100 [jbd2]
[ 1088.155075]  ? finish_wait+0xb0/0xb0
[ 1088.155110]  ext4_sync_file+0x3eb/0x440 [ext4]
[ 1088.155115]  do_fsync+0x43/0x80
[ 1088.155117]  __x64_sys_fdatasync+0x13/0x20
[ 1088.155120]  do_syscall_64+0x64/0x3d0
[ 1088.155123]  ? __do_page_fault+0x288/0x590
[ 1088.155126]  ? fpregs_assert_state_consistent+0x1e/0x50
[ 1088.155129]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1088.155132] RIP: 0033:0x7f519f7a32c4
[ 1088.155139] Code: Bad RIP value.
[ 1088.155140] RSP: 002b:00007ffeb09a8848 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 1088.155142] RAX: ffffffffffffffda RBX: 000000000024d000 RCX: 00007f519f7a32c4
[ 1088.155144] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000003
[ 1088.155145] RBP: 0000000000000003 R08: 000000000000014f R09: 000055a9e2d3b190
[ 1088.155146] R10: 0000000000000000 R11: 0000000000000246 R12: 000055a9e2d37870
[ 1088.155147] R13: 0000000000000150 R14: 000000000000006c R15: 0000000000000000
[ 1208.926585] INFO: task iucode_tool:9456 blocked for more than 241 seconds.
[ 1208.926589]       Not tainted 5.1.0+ #3417
[ 1208.926590] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1208.926592] iucode_tool     D    0  9456   9453 0x00004000
[ 1208.926595] Call Trace:
[ 1208.926604]  ? __schedule+0x297/0x690
[ 1208.926607]  ? _raw_spin_lock_irqsave+0x22/0x50
[ 1208.926609]  schedule+0x33/0xc0
[ 1208.926618]  jbd2_log_wait_commit+0x9b/0x100 [jbd2]
[ 1208.926621]  ? finish_wait+0xb0/0xb0
[ 1208.926643]  ext4_sync_file+0x3eb/0x440 [ext4]
[ 1208.926647]  do_fsync+0x43/0x80
[ 1208.926649]  __x64_sys_fdatasync+0x13/0x20
[ 1208.926651]  do_syscall_64+0x64/0x3d0
[ 1208.926654]  ? __do_page_fault+0x288/0x590
[ 1208.926656]  ? fpregs_assert_state_consistent+0x1e/0x50
[ 1208.926658]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1208.926661] RIP: 0033:0x7f519f7a32c4
[ 1208.926666] Code: Bad RIP value.
[ 1208.926667] RSP: 002b:00007ffeb09a8848 EFLAGS: 00000246 ORIG_RAX: 000000000000004b
[ 1208.926669] RAX: ffffffffffffffda RBX: 000000000024d000 RCX: 00007f519f7a32c4
[ 1208.926670] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000003
[ 1208.926671] RBP: 0000000000000003 R08: 000000000000014f R09: 000055a9e2d3b190
[ 1208.926672] R10: 0000000000000000 R11: 0000000000000246 R12: 000055a9e2d37870
[ 1208.926673] R13: 0000000000000150 R14: 000000000000006c R15: 0000000000000000

[ 1933.556182] INFO: task Thread (pooled):20910 blocked for more than 120 seconds.
[ 1933.556189]       Not tainted 5.1.0+ #3417
[ 1933.556190] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1933.556192] Thread (pooled) D    0 20910      1 0x00004000
[ 1933.556195] Call Trace:
[ 1933.556207]  ? __schedule+0x297/0x690
[ 1933.556210]  ? _raw_spin_lock_irqsave+0x22/0x50
[ 1933.556212]  schedule+0x33/0xc0
[ 1933.556224]  jbd2_log_wait_commit+0x9b/0x100 [jbd2]
[ 1933.556228]  ? finish_wait+0xb0/0xb0
[ 1933.556261]  ext4_sync_file+0x3eb/0x440 [ext4]
[ 1933.556266]  do_fsync+0x43/0x80
[ 1933.556268]  __x64_sys_fdatasync+0x13/0x20
[ 1933.556271]  do_syscall_64+0x64/0x3d0
[ 1933.556274]  ? __do_page_fault+0x288/0x590
[ 1933.556277]  ? fpregs_assert_state_consistent+0x1e/0x50
[ 1933.556279]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1933.556282] RIP: 0033:0x7f90e22d62e7
[ 1933.556288] Code: Bad RIP value.
[ 1933.556290] RSP: 002b:00007f909d4e7a00 EFLAGS: 00000293 ORIG_RAX: 000000000000004b
[ 1933.556292] RAX: ffffffffffffffda RBX: 000000000000001a RCX: 00007f90e22d62e7
[ 1933.556293] RDX: 0000000000000000 RSI: 00007f909d4e79f0 RDI: 000000000000001a
[ 1933.556294] RBP: 00007f908c004bf0 R08: 000000000000401f R09: 00007f908c009940
[ 1933.556295] R10: 00007f908c009910 R11: 0000000000000293 R12: 0000000000000001
[ 1933.556296] R13: 0000000000000001 R14: 00007f909d4e7b50 R15: 0000000000000001

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-15 12:12             ` Arthur Marsh
@ 2019-05-16  2:56               ` Theodore Ts'o
  0 siblings, 0 replies; 16+ messages in thread
From: Theodore Ts'o @ 2019-05-16  2:56 UTC (permalink / raw)
  To: Arthur Marsh; +Cc: Richard Weinberger, LKML, linux-ext4

On Wed, May 15, 2019 at 09:42:11PM +0930, Arthur Marsh wrote:
> I have built kernels with the attached patch applied and run git gc
> on the patched kernels (both the 32 bit kernel on the Pentium-D and
> the 64 bit kernel on the Athlon II X4 640).
> 
> There were a couple of warnings from other processes being blocked
> while the git gc was taking place but no filesystem corruption
> detected. (I ran forced fsck checks on the root filesystems after
> the git gc runs to check for corruption).
> 
> Thanks for the patch!

Thanks for the bug report!  My apologies for the inconvenience; I'm
going to take a look at improving my regression test configurations so
I would have noticed this earlier.

Cheers,

						- Ted

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-11 22:06   ` Theodore Ts'o
  2019-05-13  7:45     ` Arthur Marsh
  2019-05-13 10:31     ` Arthur Marsh
@ 2019-05-17  9:23     ` Geert Uytterhoeven
  2 siblings, 0 replies; 16+ messages in thread
From: Geert Uytterhoeven @ 2019-05-17  9:23 UTC (permalink / raw)
  To: Theodore Ts'o, Richard Weinberger, Arthur Marsh, LKML,
	Ext4 Developers List

Hi Ted,

On Sun, May 12, 2019 at 12:07 AM Theodore Ts'o <tytso@mit.edu> wrote:
> On Sat, May 11, 2019 at 02:43:16PM +0200, Richard Weinberger wrote:
> > [CC'in linux-ext4]
> >
> > On Sat, May 11, 2019 at 1:47 PM Arthur Marsh
> > <arthur.marsh@internode.on.net> wrote:
> > >
> > >
> > > The filesystem with the kernel source tree is the root file system, ext3, mounted as:
> > >
> > > /dev/sdb7 on / type ext3 (rw,relatime,errors=remount-ro)
> > >
> > > After the "Compressing objects" stage, the following appears in dmesg:
> > >
> > > [  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block
> > > [  849.077426] Aborting journal on device sdb7-8.
> > > [  849.100963] EXT4-fs (sdb7): Remounting filesystem read-only
> > > [  849.100976] jbd2_journal_bmap: journal block not found at offset 989 on sdb7-8
>
> This indicates that the extent tree blocks for the journal was found
> to be corrupt; so the journal couldn't be found.
>
> > > # fsck -yv
> > > fsck from util-linux 2.33.1
> > > e2fsck 1.45.0 (6-Mar-2019)
> > > /dev/sdb7: recovering journal
> > > /dev/sdb7 contains a file system with errors, check forced.
>
> But e2fsck had no problem finding the journal.
>
> > > Pass 1: Checking inodes, blocks, and sizes
> > > Pass 2: Checking directory structure
> > > Pass 3: Checking directory connectivity
> > > Pass 4: Checking reference counts
> > > Pass 5: Checking group summary information
> > > Free blocks count wrong (4619656, counted=4619444).
> > > Fix? yes
> > >
> > > Free inodes count wrong (15884075, counted=15884058).
> > > Fix? yes
>
> And no other significant problems were found.  (Ext4 never updates or
> relies on the summary number of free blocks and free inodes, since
> updating it is a scalability bottleneck and these values can be
> calculated from the per block group free block/inodes count.  So the
> fact that e2fsck needed to update them is not an issue.)
>
> So that implies that we got one set of values when we read the journal
> inode when attempting to mount the file system, and a *different* set
> of values when e2fsck was run.  Which makes means that we need
> consider the possibility that the problem is below the file system
> layer (e.g., the block layer, device drivers, etc.).
>
>
> > > /dev/sdb7: ***** FILE SYSTEM WAS MODIFIED *****
> > >
> > > Other times, I have gotten:
> > >
> > > "Inodes that were part of a corrupted orphan linked list found."
> > > "Block bitmap differences:"
> > > "Free blocks sound wrong for group"
> > >
>
> This variety of issues also implies that the issue may be in the data
> read by the file system, as opposed to an issue in the file system.
>
> Arthur, can you give us the full details of your hardware
> configuration and your kernel config file?  Also, what kernel git
> commit ID were you testing?

I'm seeing similar things running post v5.1 on ARAnyM (Atari emulator):

    EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
    ...
    EXT4-fs error (device sda1): ext4_get_branch:171: inode #1980:
block 27550: comm jbd2/sda1-1980: invalid block

and userspace hung somewhere during initial system startup, so I had to
kill the instance.

-----

    EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
    EXT4-fs (sda1): INFO: recovery required on readonly filesystem
    EXT4-fs (sda1): write access will be enabled during recovery
    EXT4-fs warning (device sda1): ext4_clear_journal_err:5078:
Filesystem error recorded from previous mount: IO failure
    EXT4-fs warning (device sda1): ext4_clear_journal_err:5079:
Marking fs in need of filesystem check.
    EXT4-fs (sda1): recovery complete
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
    ...
    Run /sbin/init as init process
    random: fast init done
    EXT4-fs (sda1): re-mounted. Opts:
    random: crng init done
    EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    EXT4-fs (sda1): error count since last fsck: 1
    EXT4-fs (sda1): initial error at time 1557931133:
ext4_get_branch:171: inode 1980: block 27550
    EXT4-fs (sda1): last error at time 1557931133:
ext4_get_branch:171: inode 1980: block 27550

-----

    EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    VFS: Mounted root (ext3 filesystem) readonly on device 8:1.
    ...
    Run /sbin/init as init process
    random: fast init done
    EXT4-fs (sda1): re-mounted. Opts:
    EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    random: crng init done
    EXT4-fs error (device sda1): ext4_get_branch:171: inode #1980:
block 27550: comm jbd2/sda1-1980: invalid block
    Aborting journal on device sda1-1980.
    EXT4-fs (sda1): Remounting filesystem read-only
    jbd2_journal_bmap: journal block not found at offset 426 on sda1-1980
    EXT4-fs error (device sda1): ext4_journal_check_start:61: Detected
aborted journal
    EXT4-fs (sda1): error count since last fsck: 3
    EXT4-fs (sda1): initial error at time 1557931133:
ext4_get_branch:171: inode 1980: block 27550
    EXT4-fs (sda1): last error at time 1558083596:
ext4_journal_check_start:61: inode 1980: block 27550
    EXT4-fs error (device sda1): ext4_remount:5328: Abort forced by user

---

    EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
    EXT4-fs (sda1): INFO: recovery required on readonly filesystem
    EXT4-fs (sda1): write access will be enabled during recovery
    random: fast init done
    EXT4-fs warning (device sda1): ext4_clear_journal_err:5078:
Filesystem error recorded from previous mount: IO failure
    EXT4-fs warning (device sda1): ext4_clear_journal_err:5079:
Marking fs in need of filesystem check.
    EXT4-fs (sda1): recovery complete
    EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    ...
    Run /sbin/init as init process
    random: crng init done
    EXT4-fs (sda1): re-mounted. Opts:
    EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
    EXT4-fs (sda1): error count since last fsck: 4
    EXT4-fs (sda1): initial error at time 1557931133:
ext4_get_branch:171: inode 1980: block 27550
    EXT4-fs (sda1): last error at time 1558083665: ext4_remount:5328:
inode 1980: block 27550

Notes:
  - It's always the same block,
  - Block device is an image file, accessed using
    arch/m68k/emu/nfblock.c, which did not receive any recent (bvec)
    updates.
  - There are no reported errors for the device containing the image
    file on the host,
  - Given Arthur sees the issue on a different class of machines, it's
    unlikely the issue is related to a problem with the block device
    (driver). It may still be an issue with the block layer, though,
  - Both Arthur and I are mounting an ext3 file system using the ext4
    subsystem.

Thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-15  4:57           ` Theodore Ts'o
  2019-05-15 12:12             ` Arthur Marsh
@ 2019-05-17 16:44             ` Geert Uytterhoeven
  2019-07-01 12:43               ` Geert Uytterhoeven
  1 sibling, 1 reply; 16+ messages in thread
From: Geert Uytterhoeven @ 2019-05-17 16:44 UTC (permalink / raw)
  To: Theodore Ts'o, Arthur Marsh, Richard Weinberger, LKML,
	Ext4 Developers List

Hi Ted,

On Wed, May 15, 2019 at 6:57 AM Theodore Ts'o <tytso@mit.edu> wrote:
> Ah, I think I see the problem.  Sorry, this one was my fault.  Does
> this fix things for you?

Thanks!
Sorry for missing this patch in the thread before.

> From 0c72924ef346d54e8627440e6d71257aa5b56105 Mon Sep 17 00:00:00 2001
> From: Theodore Ts'o <tytso@mit.edu>
> Date: Wed, 15 May 2019 00:51:19 -0400
> Subject: [PATCH] ext4: fix block validity checks for journal inodes using indirect blocks
>
> Commit 345c0dbf3a30 ("ext4: protect journal inode's blocks using
> block_validity") failed to add an exception for the journal inode in
> ext4_check_blockref(), which is the function used by ext4_get_branch()
> for indirect blocks.  This caused attempts to read from the ext3-style
> journals to fail with:
>
> [  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block
>
> Fix this by adding the missing exception check.
>
> Fixes: 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
> Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
> Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Intermittent issue no more seen in 10 test boots, so
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-05-17 16:44             ` Geert Uytterhoeven
@ 2019-07-01 12:43               ` Geert Uytterhoeven
  2019-07-01 13:56                 ` Theodore Ts'o
  0 siblings, 1 reply; 16+ messages in thread
From: Geert Uytterhoeven @ 2019-07-01 12:43 UTC (permalink / raw)
  To: Theodore Ts'o, Arthur Marsh, Richard Weinberger, LKML,
	Ext4 Developers List

Hi Ted,

On Fri, May 17, 2019 at 6:44 PM Geert Uytterhoeven <geert@linux-m68k.org> wrote:
> On Wed, May 15, 2019 at 6:57 AM Theodore Ts'o <tytso@mit.edu> wrote:
> > Ah, I think I see the problem.  Sorry, this one was my fault.  Does
> > this fix things for you?
>
> Thanks!
> Sorry for missing this patch in the thread before.
>
> > From 0c72924ef346d54e8627440e6d71257aa5b56105 Mon Sep 17 00:00:00 2001
> > From: Theodore Ts'o <tytso@mit.edu>
> > Date: Wed, 15 May 2019 00:51:19 -0400
> > Subject: [PATCH] ext4: fix block validity checks for journal inodes using indirect blocks
> >
> > Commit 345c0dbf3a30 ("ext4: protect journal inode's blocks using
> > block_validity") failed to add an exception for the journal inode in
> > ext4_check_blockref(), which is the function used by ext4_get_branch()
> > for indirect blocks.  This caused attempts to read from the ext3-style
> > journals to fail with:
> >
> > [  848.968550] EXT4-fs error (device sdb7): ext4_get_branch:171: inode #8: block 30343695: comm jbd2/sdb7-8: invalid block
> >
> > Fix this by adding the missing exception check.
> >
> > Fixes: 345c0dbf3a30 ("ext4: protect journal inode's blocks using block_validity")
> > Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
> > Signed-off-by: Theodore Ts'o <tytso@mit.edu>
>
> Intermittent issue no more seen in 10 test boots, so
> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>

Despite this fix having been applied upstream,  the kernel prints from
time to time:

    EXT4-fs (sda1): error count since last fsck: 5
    EXT4-fs (sda1): initial error at time 1557931133:
ext4_get_branch:171: inode 1980: block 27550
    EXT4-fs (sda1): last error at time 1558114349:
ext4_get_branch:171: inode 1980: block 27550

This happens even after a manual run of "e2fsck -f" (while it's mounted
RO), which reports a clean file system.

The inode and block numbers match the numbers printed due to the
previous bug.

Do you have an idea what's wrong?
Note that I run a very old version of e2fsck (from a decade ago).

Thanks!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-07-01 12:43               ` Geert Uytterhoeven
@ 2019-07-01 13:56                 ` Theodore Ts'o
  2019-07-01 14:08                   ` Geert Uytterhoeven
  0 siblings, 1 reply; 16+ messages in thread
From: Theodore Ts'o @ 2019-07-01 13:56 UTC (permalink / raw)
  To: Geert Uytterhoeven
  Cc: Arthur Marsh, Richard Weinberger, LKML, Ext4 Developers List

On Mon, Jul 01, 2019 at 02:43:14PM +0200, Geert Uytterhoeven wrote:
> Hi Ted,
> 
> Despite this fix having been applied upstream,  the kernel prints from
> time to time:
> 
>     EXT4-fs (sda1): error count since last fsck: 5
>     EXT4-fs (sda1): initial error at time 1557931133:
> ext4_get_branch:171: inode 1980: block 27550
>     EXT4-fs (sda1): last error at time 1558114349:
> ext4_get_branch:171: inode 1980: block 27550
> 
> This happens even after a manual run of "e2fsck -f" (while it's mounted
> RO), which reports a clean file system.

What's happening is this.  When the kernel detects a corruption, newer
kernels will set these superblock fields:

	__le32	s_error_count;		/* number of fs errors */
	__le32	s_first_error_time;	/* first time an error happened */
	__le32	s_first_error_ino;	/* inode involved in first error */
	__le64	s_first_error_block;	/* block involved of first error */
	__u8	s_first_error_func[32] __nonstring;	/* function where the error happened */
	__le32	s_first_error_line;	/* line number where error happened */
	__le32	s_last_error_time;	/* most recent time of an error */
	__le32	s_last_error_ino;	/* inode involved in last error */
	__le32	s_last_error_line;	/* line number where error happened */
	__le64	s_last_error_block;	/* block involved of last error */
	__u8	s_last_error_func[32] __nonstring;	/* function where the error happened */

When newer versions of e2fsck *fix* the corruption, it will clear
these fields.  It's basically a safety check because *way* too many
ext4 users run with errors=continue (aka, "don't worry, be happy"
mode), and so this is a poke in the system logs that the file system
is corrupted, and they, really, *REALLY* should fix it before they
lose (more) data.

> The inode and block numbers match the numbers printed due to the
> previous bug.

You can also see when the last file system error was detected via:

% date -d @1558114349
Fri 17 May 2019 01:32:29 PM EDT

> Do you have an idea what's wrong?
> Note that I run a very old version of e2fsck (from a decade ago).

... and that's the problem.  If you're going to be using newer
versions of the kernel, you really should be using newer versions of
e2fsprogs.

There have been a lot of bug fixes in the last 10 years, and some of
them can be data corruption bugs....

					- Ted

^ permalink raw reply	[flat|nested] 16+ messages in thread

* Re: ext3/ext4 filesystem corruption under post 5.1.0 kernels
  2019-07-01 13:56                 ` Theodore Ts'o
@ 2019-07-01 14:08                   ` Geert Uytterhoeven
  0 siblings, 0 replies; 16+ messages in thread
From: Geert Uytterhoeven @ 2019-07-01 14:08 UTC (permalink / raw)
  To: Theodore Ts'o, Geert Uytterhoeven, Arthur Marsh,
	Richard Weinberger, LKML, Ext4 Developers List

Hi Ted,

On Mon, Jul 1, 2019 at 3:56 PM Theodore Ts'o <tytso@mit.edu> wrote:
> On Mon, Jul 01, 2019 at 02:43:14PM +0200, Geert Uytterhoeven wrote:
> > Despite this fix having been applied upstream,  the kernel prints from
> > time to time:
> >
> >     EXT4-fs (sda1): error count since last fsck: 5
> >     EXT4-fs (sda1): initial error at time 1557931133:
> > ext4_get_branch:171: inode 1980: block 27550
> >     EXT4-fs (sda1): last error at time 1558114349:
> > ext4_get_branch:171: inode 1980: block 27550
> >
> > This happens even after a manual run of "e2fsck -f" (while it's mounted
> > RO), which reports a clean file system.
>
> What's happening is this.  When the kernel detects a corruption, newer
> kernels will set these superblock fields:
>
>         __le32  s_error_count;          /* number of fs errors */
>         __le32  s_first_error_time;     /* first time an error happened */
>         __le32  s_first_error_ino;      /* inode involved in first error */
>         __le64  s_first_error_block;    /* block involved of first error */
>         __u8    s_first_error_func[32] __nonstring;     /* function where the error happened */
>         __le32  s_first_error_line;     /* line number where error happened */
>         __le32  s_last_error_time;      /* most recent time of an error */
>         __le32  s_last_error_ino;       /* inode involved in last error */
>         __le32  s_last_error_line;      /* line number where error happened */
>         __le64  s_last_error_block;     /* block involved of last error */
>         __u8    s_last_error_func[32] __nonstring;      /* function where the error happened */
>
> When newer versions of e2fsck *fix* the corruption, it will clear
> these fields.  It's basically a safety check because *way* too many
> ext4 users run with errors=continue (aka, "don't worry, be happy"
> mode), and so this is a poke in the system logs that the file system
> is corrupted, and they, really, *REALLY* should fix it before they
> lose (more) data.

Thanks for the explanation, much appreciated!

> > The inode and block numbers match the numbers printed due to the
> > previous bug.
>
> You can also see when the last file system error was detected via:
>
> % date -d @1558114349
> Fri 17 May 2019 01:32:29 PM EDT

Good. So no new errors detected after the fix.

> > Do you have an idea what's wrong?
> > Note that I run a very old version of e2fsck (from a decade ago).
>
> ... and that's the problem.  If you're going to be using newer
> versions of the kernel, you really should be using newer versions of
> e2fsprogs.
>
> There have been a lot of bug fixes in the last 10 years, and some of
> them can be data corruption bugs....

Yeah, one day I'll have to change the winning horse...

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

^ permalink raw reply	[flat|nested] 16+ messages in thread

end of thread, other threads:[~2019-07-01 14:08 UTC | newest]

Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-11 11:33 ext3/ext4 filesystem corruption under post 5.1.0 kernels Arthur Marsh
2019-05-11 12:43 ` Richard Weinberger
2019-05-11 22:06   ` Theodore Ts'o
2019-05-13  7:45     ` Arthur Marsh
2019-05-13 10:31     ` Arthur Marsh
2019-05-14  1:59       ` Arthur Marsh
2019-05-14 10:42         ` Ondrej Zary
2019-05-15  2:59         ` Arthur Marsh
2019-05-15  4:57           ` Theodore Ts'o
2019-05-15 12:12             ` Arthur Marsh
2019-05-16  2:56               ` Theodore Ts'o
2019-05-17 16:44             ` Geert Uytterhoeven
2019-07-01 12:43               ` Geert Uytterhoeven
2019-07-01 13:56                 ` Theodore Ts'o
2019-07-01 14:08                   ` Geert Uytterhoeven
2019-05-17  9:23     ` Geert Uytterhoeven

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).