LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Stanimir Varbanov <stanimir.varbanov@linaro.org>
To: Vikash Garodia <vgarodia@codeaurora.org>,
	hverkuil@xs4all.nl, mchehab@kernel.org, andy.gross@linaro.org,
	bjorn.andersson@linaro.org
Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	acourbot@google.com
Subject: Re: [PATCH 4/4] media: venus: add PIL support
Date: Tue, 22 May 2018 16:02:53 +0300	[thread overview]
Message-ID: <3822394c-b304-15c3-c978-ee39589308eb@linaro.org> (raw)
In-Reply-To: <1526556740-25494-5-git-send-email-vgarodia@codeaurora.org>

Hi Vikash,

On 05/17/2018 02:32 PM, Vikash Garodia wrote:
> This adds support to load the video firmware
> and bring ARM9 out of reset. This is useful
> for platforms which does not have trustzone
> to reset the ARM9.
> 
> Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
> ---
>  .../devicetree/bindings/media/qcom,venus.txt       |   8 +-
>  drivers/media/platform/qcom/venus/core.c           |  67 +++++++--
>  drivers/media/platform/qcom/venus/core.h           |   6 +
>  drivers/media/platform/qcom/venus/firmware.c       | 163 +++++++++++++++++----
>  drivers/media/platform/qcom/venus/firmware.h       |  10 +-
>  5 files changed, 217 insertions(+), 37 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/media/qcom,venus.txt b/Documentation/devicetree/bindings/media/qcom,venus.txt
> index 00d0d1b..0ff0f2d 100644
> --- a/Documentation/devicetree/bindings/media/qcom,venus.txt
> +++ b/Documentation/devicetree/bindings/media/qcom,venus.txt

for this change in DT binding you have to cc devicetree ML. And probably
it could be separate patch.

> @@ -53,7 +53,7 @@
>  
>  * Subnodes
>  The Venus video-codec node must contain two subnodes representing
> -video-decoder and video-encoder.
> +video-decoder and video-encoder, one optional firmware subnode.
>  
>  Every of video-encoder or video-decoder subnode should have:
>  
> @@ -79,6 +79,8 @@ Every of video-encoder or video-decoder subnode should have:
>  		    power domain which is responsible for collapsing
>  		    and restoring power to the subcore.
>  
> +The firmware sub node must contain the iommus specifiers for ARM9.
> +
>  * An Example
>  	video-codec@1d00000 {
>  		compatible = "qcom,msm8916-venus";
> @@ -105,4 +107,8 @@ Every of video-encoder or video-decoder subnode should have:
>  			clock-names = "core";
>  			power-domains = <&mmcc VENUS_CORE1_GDSC>;
>  		};
> +		firmware {

venus-firmware

> +			compatible = "qcom,venus-pil-no-tz";

this should be following the other subnodes compatible names:

compatible = "venus-firmware";

> +			iommus = <&apps_smmu 0x10b2 0x0>;
> +		}
>  	};
> diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c
> index 1308488..16910558 100644
> --- a/drivers/media/platform/qcom/venus/core.c
> +++ b/drivers/media/platform/qcom/venus/core.c
> @@ -22,6 +22,7 @@
>  #include <linux/slab.h>
>  #include <linux/types.h>
>  #include <linux/pm_runtime.h>
> +#include <linux/iommu.h>
>  #include <media/videobuf2-v4l2.h>
>  #include <media/v4l2-mem2mem.h>
>  #include <media/v4l2-ioctl.h>
> @@ -30,6 +31,7 @@
>  #include "vdec.h"
>  #include "venc.h"
>  #include "firmware.h"
> +#include "hfi_venus.h"
>  
>  static void venus_event_notify(struct venus_core *core, u32 event)
>  {
> @@ -76,7 +78,7 @@ static void venus_sys_error_handler(struct work_struct *work)
>  	hfi_core_deinit(core, true);
>  	hfi_destroy(core);
>  	mutex_lock(&core->lock);
> -	venus_shutdown(core->dev);
> +	venus_shutdown(core);
>  
>  	pm_runtime_put_sync(core->dev);
>  
> @@ -84,7 +86,7 @@ static void venus_sys_error_handler(struct work_struct *work)
>  
>  	pm_runtime_get_sync(core->dev);
>  
> -	ret |= venus_boot(core->dev, core->res->fwname);
> +	ret |= venus_boot(core);
>  
>  	ret |= hfi_core_resume(core, true);
>  
> @@ -179,6 +181,20 @@ static u32 to_v4l2_codec_type(u32 codec)
>  	}
>  }
>  
> +static int store_firmware_dev(struct device *dev, void *data)
> +{
> +	struct venus_core *core;
> +
> +	core = (struct venus_core *)data;
> +	if (!core)
> +		return -EINVAL;
> +
> +	if (of_device_is_compatible(dev->of_node, "qcom,venus-pil-no-tz"))
> +		core->fw.dev = dev;
> +
> +	return 0;
> +}
> +
>  static int venus_enumerate_codecs(struct venus_core *core, u32 type)
>  {
>  	const struct hfi_inst_ops dummy_ops = {};
> @@ -229,6 +245,7 @@ static int venus_probe(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	struct venus_core *core;
>  	struct resource *r;
> +	struct iommu_domain *iommu_domain;
>  	int ret;
>  
>  	core = devm_kzalloc(dev, sizeof(*core), GFP_KERNEL);
> @@ -279,7 +296,14 @@ static int venus_probe(struct platform_device *pdev)
>  	if (ret < 0)
>  		goto err_runtime_disable;
>  
> -	ret = venus_boot(dev, core->res->fwname);
> +	ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
> +	if (ret)
> +		goto err_runtime_disable;
> +
> +	/* Attempt to register child devices */

This comment is wrong, the child devices are created by
of_platform_populate above.

> +	ret = device_for_each_child(dev, core, store_firmware_dev);

Why we need these complex gymnastics to get struct device pointer when
that could be done in venus_firmware .probe method?

I think the answer is because you want to avoid having venus-firmware.ko
(because you have to have separate struct device for iommu SID). In that
case it would be better to make venus-firmware.ko.

> +
> +	ret = venus_boot(core);
>  	if (ret)
>  		goto err_runtime_disable;
>  
> @@ -303,14 +327,17 @@ static int venus_probe(struct platform_device *pdev)
>  	if (ret)
>  		goto err_core_deinit;
>  
> -	ret = of_platform_populate(dev->of_node, NULL, NULL, dev);
> +	ret = pm_runtime_put_sync(dev);
>  	if (ret)
>  		goto err_dev_unregister;
>  
> -	ret = pm_runtime_put_sync(dev);
> -	if (ret)
> +	iommu_domain = iommu_get_domain_for_dev(dev);
> +	if (!iommu_domain)
>  		goto err_dev_unregister;
>  
> +	iommu_domain->geometry.aperture_start = VENUS_FW_MEM_SIZE;
> +	iommu_domain->geometry.aperture_end = VENUS_MAX_MEM_REGION;

I don't think that is needed for this struct device (Venus DT node
struct device). And also why aperture_start is on 6th MB? I think that
this iommu domain is for venus_non_secure iommu context_bank.

Those geometry parameters are checked/used only from dma-iommu.c. They
are checked before entering on venus_probe and only when
geometry.force_aperture is true. So updating those params here doesn't
make any sense to iommu?

> +
>  	return 0;
>  
>  err_dev_unregister:
> @@ -318,7 +345,7 @@ static int venus_probe(struct platform_device *pdev)
>  err_core_deinit:
>  	hfi_core_deinit(core, false);
>  err_venus_shutdown:
> -	venus_shutdown(dev);
> +	venus_shutdown(core);
>  err_runtime_disable:
>  	pm_runtime_set_suspended(dev);
>  	pm_runtime_disable(dev);
> @@ -339,7 +366,7 @@ static int venus_remove(struct platform_device *pdev)
>  	WARN_ON(ret);
>  
>  	hfi_destroy(core);
> -	venus_shutdown(dev);
> +	venus_shutdown(core);
>  	of_platform_depopulate(dev);
>  
>  	pm_runtime_put_sync(dev);
> @@ -483,7 +510,29 @@ static __maybe_unused int venus_runtime_resume(struct device *dev)
>  		.pm = &venus_pm_ops,
>  	},
>  };
> -module_platform_driver(qcom_venus_driver);
> +
> +static int __init venus_init(void)
> +{
> +	int ret;
> +
> +	ret = platform_driver_register(&qcom_video_firmware_driver);
> +	if (ret)
> +		return ret;

I think that this shouldn't be here, it is clear that firmware loader
code should be on separate device/driver (even outside of venus DT node).

> +
> +	ret = platform_driver_register(&qcom_venus_driver);
> +	if (ret)
> +		platform_driver_unregister(&qcom_video_firmware_driver);
> +
> +	return ret;
> +}
> +module_init(venus_init);
> +
> +static void __exit venus_exit(void)
> +{
> +	platform_driver_unregister(&qcom_venus_driver);
> +	platform_driver_unregister(&qcom_video_firmware_driver);
> +}
> +module_exit(venus_exit);
>  
>  MODULE_ALIAS("platform:qcom-venus");
>  MODULE_DESCRIPTION("Qualcomm Venus video encoder and decoder driver");
> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
> index 85e66e2..68fc8af 100644
> --- a/drivers/media/platform/qcom/venus/core.h
> +++ b/drivers/media/platform/qcom/venus/core.h
> @@ -80,6 +80,11 @@ struct venus_caps {
>  	bool valid;
>  };
>  
> +struct video_firmware {
> +	struct device *dev;
> +	dma_addr_t iova;
> +	struct iommu_domain *iommu_domain;
> +};
>  /**
>   * struct venus_core - holds core parameters valid for all instances
>   *
> @@ -124,6 +129,7 @@ struct venus_core {
>  	struct device *dev;
>  	struct device *dev_dec;
>  	struct device *dev_enc;
> +	struct video_firmware fw;
>  	struct mutex lock;
>  	struct list_head instances;
>  	atomic_t insts_count;
> diff --git a/drivers/media/platform/qcom/venus/firmware.c b/drivers/media/platform/qcom/venus/firmware.c
> index 8f25375..614c805 100644
> --- a/drivers/media/platform/qcom/venus/firmware.c
> +++ b/drivers/media/platform/qcom/venus/firmware.c
> @@ -12,8 +12,12 @@
>   *
>   */
>  
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
>  #include <linux/device.h>
>  #include <linux/firmware.h>
> +#include <linux/iommu.h>
>  #include <linux/delay.h>
>  #include <linux/kernel.h>
>  #include <linux/io.h>
> @@ -27,8 +31,10 @@
>  #include "firmware.h"
>  #include "hfi_venus_io.h"
>  
> -#define VENUS_PAS_ID			9
> -#define VENUS_FW_MEM_SIZE		(6 * SZ_1M)
> +static const struct of_device_id firmware_dt_match[] = {
> +	{ .compatible = "qcom,venus-pil-no-tz" },
> +	{ }
> +};
>  
>  void venus_reset_hw(struct venus_core *core)
>  {
> @@ -53,40 +59,37 @@ void venus_reset_hw(struct venus_core *core)
>  	/* Bring Arm9 out of reset */
>  	writel_relaxed(0, reg_base + WRAPPER_A9SS_SW_RESET);
>  }
> -int venus_boot(struct device *dev, const char *fwname)
> +EXPORT_SYMBOL_GPL(venus_reset_hw);
> +
> +int venus_load_fw(struct device *dev, const char *fwname,
> +		phys_addr_t *mem_phys, size_t *mem_size)
>  {
>  	const struct firmware *mdt;
>  	struct device_node *node;
> -	phys_addr_t mem_phys;
>  	struct resource r;
>  	ssize_t fw_size;
> -	size_t mem_size;
>  	void *mem_va;
>  	int ret;
>  
> -	if (!IS_ENABLED(CONFIG_QCOM_MDT_LOADER) || !qcom_scm_is_available())
> -		return -EPROBE_DEFER;
> -
>  	node = of_parse_phandle(dev->of_node, "memory-region", 0);
>  	if (!node) {
>  		dev_err(dev, "no memory-region specified\n");
>  		return -EINVAL;
>  	}
> -
>  	ret = of_address_to_resource(node, 0, &r);
>  	if (ret)
>  		return ret;
>  
> -	mem_phys = r.start;
> -	mem_size = resource_size(&r);
> +	*mem_phys = r.start;
> +	*mem_size = resource_size(&r);
>  
> -	if (mem_size < VENUS_FW_MEM_SIZE)
> +	if (*mem_size < VENUS_FW_MEM_SIZE)
>  		return -EINVAL;
>  
> -	mem_va = memremap(r.start, mem_size, MEMREMAP_WC);
> +	mem_va = memremap(r.start, *mem_size, MEMREMAP_WC);
>  	if (!mem_va) {
>  		dev_err(dev, "unable to map memory region: %pa+%zx\n",
> -			&r.start, mem_size);
> +			&r.start, *mem_size);
>  		return -ENOMEM;
>  	}
>  
> @@ -101,24 +104,134 @@ int venus_boot(struct device *dev, const char *fwname)
>  		goto err_unmap;
>  	}
>  
> -	ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID, mem_va, mem_phys,
> -			    mem_size, NULL);
> +	ret = qcom_mdt_load(dev, mdt, fwname, VENUS_PAS_ID, mem_va, *mem_phys,
> +			    *mem_size, NULL);
>  
>  	release_firmware(mdt);
>  
> -	if (ret)
> -		goto err_unmap;
> -
> -	ret = qcom_scm_pas_auth_and_reset(VENUS_PAS_ID);
> -	if (ret)
> -		goto err_unmap;
> -
>  err_unmap:
>  	memunmap(mem_va);
>  	return ret;
>  }
>  
> -int venus_shutdown(struct device *dev)
> +int venus_boot_noTZ(struct venus_core *core, phys_addr_t mem_phys,
> +							size_t mem_size)
>  {
> -	return qcom_scm_pas_shutdown(VENUS_PAS_ID);
> +	struct iommu_domain *iommu;
> +	struct device *dev;
> +	int ret;
> +
> +	if (!core->fw.dev)
> +		return -EPROBE_DEFER;
> +
> +	dev = core->fw.dev;
> +
> +	iommu = iommu_domain_alloc(&platform_bus_type);
> +	if (!iommu) {
> +		dev_err(dev, "Failed to allocate iommu domain\n");
> +		return -ENOMEM;
> +	}
> +
> +	iommu->geometry.aperture_start = 0x0;
> +	iommu->geometry.aperture_end = VENUS_FW_MEM_SIZE;

The same comment for geometry params as for venus_probe is valid here.

> +
> +	ret = iommu_attach_device(iommu, dev);
> +	if (ret) {
> +		dev_err(dev, "could not attach device\n");
> +		goto err_attach;
> +	}
> +
> +	ret = iommu_map(iommu, core->fw.iova, mem_phys, mem_size,
> +			IOMMU_READ|IOMMU_WRITE|IOMMU_PRIV);

iova is not initialized and is zero, maybe we don't need that variable
in the venus_firmware structure?

> +	if (ret) {
> +		dev_err(dev, "could not map video firmware region\n");
> +		goto err_map;
> +	}
> +	core->fw.iommu_domain = iommu;
> +	venus_reset_hw(core);
> +
> +	return 0;
> +
> +err_map:
> +	iommu_detach_device(iommu, dev);
> +err_attach:
> +	iommu_domain_free(iommu);
> +	return ret;
>  }
> +
> +int venus_shutdown_noTZ(struct venus_core *core)
> +{
> +	struct iommu_domain *iommu;
> +	u32 reg;
> +	struct device *dev = core->fw.dev;
> +	void __iomem *reg_base = core->base;
> +
> +	/* Assert the reset to ARM9 */
> +	reg = readl_relaxed(reg_base + WRAPPER_A9SS_SW_RESET);
> +	reg |= BIT(4);
> +	writel_relaxed(reg, reg_base + WRAPPER_A9SS_SW_RESET);
> +
> +	/* Make sure reset is asserted before the mapping is removed */
> +	mb();
> +
> +	iommu = core->fw.iommu_domain;
> +
> +	iommu_unmap(iommu, core->fw.iova, VENUS_FW_MEM_SIZE);
> +	iommu_detach_device(iommu, dev);
> +	iommu_domain_free(iommu);

check iommu APIs for errors.

-- 
regards,
Stan

  parent reply	other threads:[~2018-05-22 13:03 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-17 11:32 [PATCH 0/4] Venus updates - PIL Vikash Garodia
2018-05-17 11:32 ` [PATCH 1/4] soc: qcom: mdt_loader: Add check to make scm calls Vikash Garodia
2018-05-17 15:50   ` Jordan Crouse
2018-05-18  5:28   ` Bjorn Andersson
2018-05-18  7:18     ` Vikash Garodia
2018-05-17 11:32 ` [PATCH 2/4] media: venus: add a routine to reset ARM9 Vikash Garodia
2018-05-17 15:57   ` Jordan Crouse
2018-05-17 11:32 ` [PATCH 3/4] venus: add check to make scm calls Vikash Garodia
2018-05-22 13:04   ` Stanimir Varbanov
2018-05-22 19:50     ` Jordan Crouse
2018-05-22 20:57       ` Stanimir Varbanov
2018-05-23  5:30         ` Vikash Garodia
2018-05-17 11:32 ` [PATCH 4/4] media: venus: add PIL support Vikash Garodia
2018-05-18  0:40   ` Trilok Soni
2018-05-18 12:20     ` Vikash Garodia
2018-05-22 13:02   ` Stanimir Varbanov [this message]
2018-05-22 15:52     ` Stanimir Varbanov
2018-06-01  6:53     ` Vikash Garodia

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3822394c-b304-15c3-c978-ee39589308eb@linaro.org \
    --to=stanimir.varbanov@linaro.org \
    --cc=acourbot@google.com \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=hverkuil@xs4all.nl \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=vgarodia@codeaurora.org \
    --subject='Re: [PATCH 4/4] media: venus: add PIL support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).