LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Baolin Wang <baolin.wang@linaro.org>
To: adrian.hunter@intel.com, ulf.hansson@linaro.org,
zhang.lyra@gmail.com, orsonzhai@gmail.com, robh+dt@kernel.org,
mark.rutland@arm.com, arnd@arndb.de, olof@lixom.net
Cc: baolin.wang@linaro.org, vincent.guittot@linaro.org,
arm@kernel.org, linux-arm-kernel@lists.infradead.org,
linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH v2 3/9] mmc: sdhci-sprd: Add optional gate clock support
Date: Tue, 4 Jun 2019 16:14:23 +0800 [thread overview]
Message-ID: <3bd7f5b0d4c78b75f8c4067a34f79396b4fd0a5c.1559635435.git.baolin.wang@linaro.org> (raw)
In-Reply-To: <cover.1559635435.git.baolin.wang@linaro.org>
In-Reply-To: <cover.1559635435.git.baolin.wang@linaro.org>
For the Spreadtrum SC9860 platform, we should enable another gate clock
'2x_enable' to make the SD host controller work well.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
---
drivers/mmc/host/sdhci-sprd.c | 35 +++++++++++++++++++++++++++++------
1 file changed, 29 insertions(+), 6 deletions(-)
diff --git a/drivers/mmc/host/sdhci-sprd.c b/drivers/mmc/host/sdhci-sprd.c
index e741491..31ba7d6 100644
--- a/drivers/mmc/host/sdhci-sprd.c
+++ b/drivers/mmc/host/sdhci-sprd.c
@@ -60,6 +60,7 @@ struct sdhci_sprd_host {
u32 version;
struct clk *clk_sdio;
struct clk *clk_enable;
+ struct clk *clk_2x_enable;
u32 base_rate;
int flags; /* backup of host attribute */
};
@@ -364,6 +365,10 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
}
sprd_host->clk_enable = clk;
+ clk = devm_clk_get(&pdev->dev, "2x_enable");
+ if (!IS_ERR(clk))
+ sprd_host->clk_2x_enable = clk;
+
ret = clk_prepare_enable(sprd_host->clk_sdio);
if (ret)
goto pltfm_free;
@@ -372,6 +377,10 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
if (ret)
goto clk_disable;
+ ret = clk_prepare_enable(sprd_host->clk_2x_enable);
+ if (ret)
+ goto clk_disable2;
+
sdhci_sprd_init_config(host);
host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
sprd_host->version = ((host->version & SDHCI_VENDOR_VER_MASK) >>
@@ -408,6 +417,9 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
+ clk_disable_unprepare(sprd_host->clk_2x_enable);
+
+clk_disable2:
clk_disable_unprepare(sprd_host->clk_enable);
clk_disable:
@@ -427,6 +439,7 @@ static int sdhci_sprd_remove(struct platform_device *pdev)
mmc_remove_host(mmc);
clk_disable_unprepare(sprd_host->clk_sdio);
clk_disable_unprepare(sprd_host->clk_enable);
+ clk_disable_unprepare(sprd_host->clk_2x_enable);
mmc_free_host(mmc);
@@ -449,6 +462,7 @@ static int sdhci_sprd_runtime_suspend(struct device *dev)
clk_disable_unprepare(sprd_host->clk_sdio);
clk_disable_unprepare(sprd_host->clk_enable);
+ clk_disable_unprepare(sprd_host->clk_2x_enable);
return 0;
}
@@ -459,19 +473,28 @@ static int sdhci_sprd_runtime_resume(struct device *dev)
struct sdhci_sprd_host *sprd_host = TO_SPRD_HOST(host);
int ret;
- ret = clk_prepare_enable(sprd_host->clk_enable);
+ ret = clk_prepare_enable(sprd_host->clk_2x_enable);
if (ret)
return ret;
+ ret = clk_prepare_enable(sprd_host->clk_enable);
+ if (ret)
+ goto clk_2x_disable;
+
ret = clk_prepare_enable(sprd_host->clk_sdio);
- if (ret) {
- clk_disable_unprepare(sprd_host->clk_enable);
- return ret;
- }
+ if (ret)
+ goto clk_disable;
sdhci_runtime_resume_host(host);
-
return 0;
+
+clk_disable:
+ clk_disable_unprepare(sprd_host->clk_enable);
+
+clk_2x_disable:
+ clk_disable_unprepare(sprd_host->clk_2x_enable);
+
+ return ret;
}
#endif
--
1.7.9.5
next prev parent reply other threads:[~2019-06-04 8:15 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-04 8:14 [PATCH v2 0/9] Add SD host controller support for SC9860 platform Baolin Wang
2019-06-04 8:14 ` [PATCH v2 1/9] mmc: sdhci-sprd: Check the enable clock's return value correctly Baolin Wang
2019-06-04 8:14 ` [PATCH v2 2/9] dt-bindings: mmc: sprd: Add another optional clock documentation Baolin Wang
2019-06-04 8:14 ` Baolin Wang [this message]
2019-06-04 8:14 ` [PATCH v2 4/9] mmc: sdhci-sprd: Implement the get_max_timeout_count() interface Baolin Wang
2019-06-04 8:14 ` [PATCH v2 5/9] mmc: sdhci-sprd: Add HS400 enhanced strobe mode Baolin Wang
2019-06-04 8:14 ` [PATCH v2 6/9] mmc: sdhci-sprd: Enable PHY DLL to make clock stable Baolin Wang
2019-06-04 8:14 ` [PATCH v2 7/9] dt-bindings: mmc: sprd: Add PHY DLL delay documentation Baolin Wang
2019-06-04 8:14 ` [PATCH v2 8/9] mmc: sdhci-sprd: Add PHY DLL delay configuration Baolin Wang
2019-06-04 8:14 ` [PATCH v2 9/9] arm64: dts: sprd: Add Spreadtrum SD host controller support Baolin Wang
2019-06-19 13:16 ` Olof Johansson
2019-06-07 11:02 ` [PATCH v2 0/9] Add SD host controller support for SC9860 platform Ulf Hansson
[not found] ` <15AEA3314E88B01E.21242@linux.kernel.org>
2019-07-05 22:29 ` [PATCH v2 1/9] mmc: sdhci-sprd: Check the enable clock's return value correctly Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3bd7f5b0d4c78b75f8c4067a34f79396b4fd0a5c.1559635435.git.baolin.wang@linaro.org \
--to=baolin.wang@linaro.org \
--cc=adrian.hunter@intel.com \
--cc=arm@kernel.org \
--cc=arnd@arndb.de \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=olof@lixom.net \
--cc=orsonzhai@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ulf.hansson@linaro.org \
--cc=vincent.guittot@linaro.org \
--cc=zhang.lyra@gmail.com \
--subject='Re: [PATCH v2 3/9] mmc: sdhci-sprd: Add optional gate clock support' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).