Re: [PATCH v10 4/4] [media] platform: Add Synopsys DesignWare HDMI RX Controller Driver

[Jose Abreu <Jose.Abreu@synopsys.com>]

Hi Hans,

On 13-12-2017 20:49, Hans Verkuil wrote:
> On 13/12/17 15:00, Jose Abreu wrote:
>>
>> Indeed. I compared the values with the spec and they are not
>> correct. Even hsync is wrong. I already corrected in the code the
>> hsync but regarding interlace I'm not seeing an easy way to do
>> this without using interrupts in each vsync because the register
>> I was toggling does not behave as I expected (I misunderstood the
>> databook). Maybe we should not detect interlaced modes for now?
>> Or not fill the il_ fields?
> As I mentioned above you as long as you get a good backporch value you
> can deduce from whether it is an odd or even number to which field it
> belongs and fill in the other values. So I think you only need to read
> these values for one field.
>
> Filling in good values here (at least as far as is possible since not all
> hardware can give it) will help debugging issues, even if you otherwise do
> not support interlaced.

Ok, I will fill the fields.

Until the end of January I will be quite busy in another project
so if you could review the remaining patches of this series I
would appreciate very much ... This way when I have the time I
can code all the changes and send them at once.

Thanks and Best Regards,
Jose Miguel Abreu

>
> Regards,
>
> 	Hans