LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "H. Nikolaus Schaller" <hns@goldelico.com>
To: Paul Cercueil <paul@crapouillou.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Thomas Bogendoerfer <tsbogend@alpha.franken.de>,
	"H. Nikolaus Schaller" <hns@goldelico.com>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Kees Cook <keescook@chromium.org>,
	"Eric W. Biederman" <ebiederm@xmission.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Robert Foss <robert.foss@linaro.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Ezequiel Garcia <ezequiel@collabora.com>,
	Harry Wentland <harry.wentland@amd.com>,
	Sam Ravnborg <sam@ravnborg.org>,
	Maxime Ripard <maxime@cerno.tech>,
	Hans Verkuil <hverkuil-cisco@xs4all.nl>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Paul Boddie <paul@boddie.org.uk>
Cc: devicetree@vger.kernel.org, linux-mips@vger.kernel.org,
	linux-kernel@vger.kernel.org, letux-kernel@openphoenux.org,
	Jonas Karlman <jonas@kwiboo.se>,
	dri-devel@lists.freedesktop.org
Subject: [PATCH v9 2/8] drm/ingenic: Add support for JZ4780 and HDMI output
Date: Wed, 24 Nov 2021 22:29:08 +0100	[thread overview]
Message-ID: <3c1aa7982faa0bebff0022c951635b18a4ac83e9.1637789354.git.hns@goldelico.com> (raw)
In-Reply-To: <cover.1637789354.git.hns@goldelico.com>

From: Paul Boddie <paul@boddie.org.uk>

Add support for the LCD controller present on JZ4780 SoCs.
This SoC uses 8-byte descriptors which extend the current
4-byte descriptors used for other Ingenic SoCs.

Tested on MIPS Creator CI20 board.

Signed-off-by: Paul Boddie <paul@boddie.org.uk>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 drivers/gpu/drm/ingenic/ingenic-drm-drv.c | 53 +++++++++++++++++++++++
 drivers/gpu/drm/ingenic/ingenic-drm.h     | 38 ++++++++++++++++
 2 files changed, 91 insertions(+)

diff --git a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
index 0bb590c3910d9..34089bc6e0fcd 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
+++ b/drivers/gpu/drm/ingenic/ingenic-drm-drv.c
@@ -6,6 +6,7 @@
 
 #include "ingenic-drm.h"
 
+#include <linux/bitfield.h>
 #include <linux/component.h>
 #include <linux/clk.h>
 #include <linux/dma-mapping.h>
@@ -49,6 +50,11 @@ struct ingenic_dma_hwdesc {
 	u32 addr;
 	u32 id;
 	u32 cmd;
+	/* extended hw descriptor for jz4780 */
+	u32 offsize;
+	u32 pagewidth;
+	u32 cpos;
+	u32 dessize;
 } __aligned(16);
 
 struct ingenic_dma_hwdescs {
@@ -60,6 +66,7 @@ struct jz_soc_info {
 	bool needs_dev_clk;
 	bool has_osd;
 	bool map_noncoherent;
+	bool use_extended_hwdesc;
 	unsigned int max_width, max_height;
 	const u32 *formats_f0, *formats_f1;
 	unsigned int num_formats_f0, num_formats_f1;
@@ -446,6 +453,9 @@ static int ingenic_drm_plane_atomic_check(struct drm_plane *plane,
 	if (!crtc)
 		return 0;
 
+	if (plane == &priv->f0)
+		return -EINVAL;
+
 	crtc_state = drm_atomic_get_existing_crtc_state(state,
 							crtc);
 	if (WARN_ON(!crtc_state))
@@ -662,6 +672,33 @@ static void ingenic_drm_plane_atomic_update(struct drm_plane *plane,
 		hwdesc->cmd = JZ_LCD_CMD_EOF_IRQ | (width * height * cpp / 4);
 		hwdesc->next = dma_hwdesc_addr(priv, next_id);
 
+		if (priv->soc_info->use_extended_hwdesc) {
+			hwdesc->cmd |= JZ_LCD_CMD_FRM_ENABLE;
+
+			/* Extended 8-byte descriptor */
+			hwdesc->cpos = 0;
+			hwdesc->offsize = 0;
+			hwdesc->pagewidth = 0;
+
+			switch (newstate->fb->format->format) {
+			case DRM_FORMAT_XRGB1555:
+				hwdesc->cpos |= JZ_LCD_CPOS_RGB555;
+				fallthrough;
+			case DRM_FORMAT_RGB565:
+				hwdesc->cpos |= JZ_LCD_CPOS_BPP_15_16;
+				break;
+			case DRM_FORMAT_XRGB8888:
+				hwdesc->cpos |= JZ_LCD_CPOS_BPP_18_24;
+				break;
+			}
+			hwdesc->cpos |= (JZ_LCD_CPOS_COEFFICIENT_1 <<
+					 JZ_LCD_CPOS_COEFFICIENT_OFFSET);
+			hwdesc->dessize =
+				(0xff << JZ_LCD_DESSIZE_ALPHA_OFFSET) |
+				FIELD_PREP(JZ_LCD_DESSIZE_HEIGHT_MASK, height - 1) |
+				FIELD_PREP(JZ_LCD_DESSIZE_WIDTH_MASK, width - 1);
+		}
+
 		if (drm_atomic_crtc_needs_modeset(crtc_state)) {
 			fourcc = newstate->fb->format->format;
 
@@ -693,6 +730,9 @@ static void ingenic_drm_encoder_atomic_mode_set(struct drm_encoder *encoder,
 		    | JZ_LCD_CFG_SPL_DISABLE | JZ_LCD_CFG_REV_DISABLE;
 	}
 
+	if (priv->soc_info->use_extended_hwdesc)
+		cfg |= JZ_LCD_CFG_DESCRIPTOR_8;
+
 	if (mode->flags & DRM_MODE_FLAG_NHSYNC)
 		cfg |= JZ_LCD_CFG_HSYNC_ACTIVE_LOW;
 	if (mode->flags & DRM_MODE_FLAG_NVSYNC)
@@ -1468,10 +1508,23 @@ static const struct jz_soc_info jz4770_soc_info = {
 	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
 };
 
+static const struct jz_soc_info jz4780_soc_info = {
+	.needs_dev_clk = true,
+	.has_osd = true,
+	.use_extended_hwdesc = true,
+	.max_width = 4096,
+	.max_height = 2048,
+	.formats_f1 = jz4770_formats_f1,
+	.num_formats_f1 = ARRAY_SIZE(jz4770_formats_f1),
+	.formats_f0 = jz4770_formats_f0,
+	.num_formats_f0 = ARRAY_SIZE(jz4770_formats_f0),
+};
+
 static const struct of_device_id ingenic_drm_of_match[] = {
 	{ .compatible = "ingenic,jz4740-lcd", .data = &jz4740_soc_info },
 	{ .compatible = "ingenic,jz4725b-lcd", .data = &jz4725b_soc_info },
 	{ .compatible = "ingenic,jz4770-lcd", .data = &jz4770_soc_info },
+	{ .compatible = "ingenic,jz4780-lcd", .data = &jz4780_soc_info },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, ingenic_drm_of_match);
diff --git a/drivers/gpu/drm/ingenic/ingenic-drm.h b/drivers/gpu/drm/ingenic/ingenic-drm.h
index 22654ac1dde1c..cb1d09b625881 100644
--- a/drivers/gpu/drm/ingenic/ingenic-drm.h
+++ b/drivers/gpu/drm/ingenic/ingenic-drm.h
@@ -44,8 +44,11 @@
 #define JZ_REG_LCD_XYP1				0x124
 #define JZ_REG_LCD_SIZE0			0x128
 #define JZ_REG_LCD_SIZE1			0x12c
+#define JZ_REG_LCD_PCFG				0x2c0
 
 #define JZ_LCD_CFG_SLCD				BIT(31)
+#define JZ_LCD_CFG_DESCRIPTOR_8			BIT(28)
+#define JZ_LCD_CFG_RECOVER_FIFO_UNDERRUN	BIT(25)
 #define JZ_LCD_CFG_PS_DISABLE			BIT(23)
 #define JZ_LCD_CFG_CLS_DISABLE			BIT(22)
 #define JZ_LCD_CFG_SPL_DISABLE			BIT(21)
@@ -63,6 +66,7 @@
 #define JZ_LCD_CFG_DE_ACTIVE_LOW		BIT(9)
 #define JZ_LCD_CFG_VSYNC_ACTIVE_LOW		BIT(8)
 #define JZ_LCD_CFG_18_BIT			BIT(7)
+#define JZ_LCD_CFG_24_BIT			BIT(6)
 #define JZ_LCD_CFG_PDW				(BIT(5) | BIT(4))
 
 #define JZ_LCD_CFG_MODE_GENERIC_16BIT		0
@@ -132,6 +136,7 @@
 #define JZ_LCD_CMD_SOF_IRQ			BIT(31)
 #define JZ_LCD_CMD_EOF_IRQ			BIT(30)
 #define JZ_LCD_CMD_ENABLE_PAL			BIT(28)
+#define JZ_LCD_CMD_FRM_ENABLE			BIT(26)
 
 #define JZ_LCD_SYNC_MASK			0x3ff
 
@@ -153,6 +158,7 @@
 #define JZ_LCD_RGBC_EVEN_BGR			(0x5 << 0)
 
 #define JZ_LCD_OSDC_OSDEN			BIT(0)
+#define JZ_LCD_OSDC_ALPHAEN			BIT(2)
 #define JZ_LCD_OSDC_F0EN			BIT(3)
 #define JZ_LCD_OSDC_F1EN			BIT(4)
 
@@ -176,6 +182,38 @@
 #define JZ_LCD_SIZE01_WIDTH_LSB			0
 #define JZ_LCD_SIZE01_HEIGHT_LSB		16
 
+#define JZ_LCD_DESSIZE_ALPHA_OFFSET		24
+#define JZ_LCD_DESSIZE_HEIGHT_MASK		GENMASK(23, 12)
+#define JZ_LCD_DESSIZE_WIDTH_MASK		GENMASK(11, 0)
+
+#define JZ_LCD_CPOS_BPP_15_16			(4 << 27)
+#define JZ_LCD_CPOS_BPP_18_24			(5 << 27)
+#define JZ_LCD_CPOS_BPP_30			(7 << 27)
+#define JZ_LCD_CPOS_RGB555			BIT(30)
+#define JZ_LCD_CPOS_PREMULTIPLY_LCD		BIT(26)
+#define JZ_LCD_CPOS_COEFFICIENT_OFFSET		24
+#define JZ_LCD_CPOS_COEFFICIENT_0		0
+#define JZ_LCD_CPOS_COEFFICIENT_1		1
+#define JZ_LCD_CPOS_COEFFICIENT_ALPHA1		2
+#define JZ_LCD_CPOS_COEFFICIENT_1_ALPHA1	3
+
+#define JZ_LCD_RGBC_RGB_PADDING			BIT(15)
+#define JZ_LCD_RGBC_RGB_PADDING_FIRST		BIT(14)
+#define JZ_LCD_RGBC_422				BIT(8)
+#define JZ_LCD_RGBC_RGB_FORMAT_ENABLE		BIT(7)
+
+#define JZ_LCD_PCFG_PRI_MODE			BIT(31)
+#define JZ_LCD_PCFG_HP_BST_4			(0 << 28)
+#define JZ_LCD_PCFG_HP_BST_8			(1 << 28)
+#define JZ_LCD_PCFG_HP_BST_16			(2 << 28)
+#define JZ_LCD_PCFG_HP_BST_32			(3 << 28)
+#define JZ_LCD_PCFG_HP_BST_64			(4 << 28)
+#define JZ_LCD_PCFG_HP_BST_16_CONT		(5 << 28)
+#define JZ_LCD_PCFG_HP_BST_DISABLE		(7 << 28)
+#define JZ_LCD_PCFG_THRESHOLD2_OFFSET		18
+#define JZ_LCD_PCFG_THRESHOLD1_OFFSET		9
+#define JZ_LCD_PCFG_THRESHOLD0_OFFSET		0
+
 struct device;
 struct drm_plane;
 struct drm_plane_state;
-- 
2.33.0


  parent reply	other threads:[~2021-11-24 21:29 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-24 21:29 [PATCH v9 0/8] MIPS: JZ4780 and CI20 HDMI H. Nikolaus Schaller
2021-11-24 21:29 ` [PATCH v9 1/8] drm/ingenic: prepare ingenic drm for later addition of JZ4780 H. Nikolaus Schaller
2021-11-24 21:29 ` H. Nikolaus Schaller [this message]
2021-11-24 21:29 ` [PATCH v9 3/8] dt-bindings: display: Add ingenic,jz4780-dw-hdmi DT Schema H. Nikolaus Schaller
2021-11-25 21:26   ` Rob Herring
2021-11-30 17:01     ` H. Nikolaus Schaller
2021-11-30 18:19       ` Rob Herring
2021-11-24 21:29 ` [PATCH v9 4/8] drm/ingenic: Add dw-hdmi driver for jz4780 H. Nikolaus Schaller
2021-11-24 21:29 ` [PATCH v9 5/8] MIPS: DTS: jz4780: Account for Synopsys HDMI driver and LCD controllers H. Nikolaus Schaller
2021-11-24 21:29 ` [PATCH v9 6/8] MIPS: DTS: CI20: Add DT nodes for HDMI setup H. Nikolaus Schaller
2021-11-24 21:29 ` [PATCH v9 7/8] MIPS: defconfig: CI20: configure for DRM_DW_HDMI_JZ4780 H. Nikolaus Schaller
2021-11-24 21:29 ` [PATCH v9 8/8] [RFC] MIPS: DTS: Ingenic: adjust register size to available registers H. Nikolaus Schaller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3c1aa7982faa0bebff0022c951635b18a4ac83e9.1637789354.git.hns@goldelico.com \
    --to=hns@goldelico.com \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=airlied@linux.ie \
    --cc=broonie@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=ebiederm@xmission.com \
    --cc=ezequiel@collabora.com \
    --cc=geert+renesas@glider.be \
    --cc=harry.wentland@amd.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=keescook@chromium.org \
    --cc=letux-kernel@openphoenux.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=maxime@cerno.tech \
    --cc=miquel.raynal@bootlin.com \
    --cc=narmstrong@baylibre.com \
    --cc=paul@boddie.org.uk \
    --cc=paul@crapouillou.net \
    --cc=robert.foss@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=tsbogend@alpha.franken.de \
    --subject='Re: [PATCH v9 2/8] drm/ingenic: Add support for JZ4780 and HDMI output' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).