LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Vladimir Zapolskiy <vz@mleia.com>, Peter Rosin <peda@axentia.se>,
	linux-kernel@vger.kernel.org, Ken Chen <chen.kenyy@inventec.com>
Cc: Wolfram Sang <wsa@the-dreams.de>,
	joel@jms.id.au, linux-i2c@vger.kernel.org
Subject: Re: [PATCH 3/3] i2c: mux: pca9541: prepare for PCA9641 support
Date: Tue, 20 Mar 2018 18:19:18 -0700	[thread overview]
Message-ID: <3cfc6e53-a86d-8ef1-b83d-9f3c1b3d7b9c@roeck-us.net> (raw)
In-Reply-To: <bc464354-660a-00ed-e713-eec987407695@mleia.com>

On 03/20/2018 04:17 PM, Vladimir Zapolskiy wrote:
> Hi Peter, Ken,
> 
> On 03/20/2018 11:32 AM, Peter Rosin wrote:
>> Make the arbitrate and release_bus implementation chip specific.
>>
> 
> by chance I took a look at the original implementation done by Ken, and
> I would say that this 3/3 change is an overkill as a too generic one.
> Is there any next observable extension? And do two abstracted (*arbitrate)
> and (*release_bus) cover it well? Probably no.
> 
> At first it would be simpler to add a new chip id field into struct pca9541
> (struct rename would be needed of course), and do a selection of specific
> pca9x41_arbitrate() and pca9x41_release_bus() depending on it:
> 

FWIW, I very much prefer Peter's code. I think it is much cleaner.

Guenter

> ----8<----
> diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
> index 47685eb..a40e6d8 100644
> --- a/drivers/i2c/muxes/i2c-mux-pca9541.c
> +++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
> @@ -70,8 +70,13 @@
>   #define SELECT_DELAY_SHORT	50
>   #define SELECT_DELAY_LONG	1000
>   
> +enum chip_id {
> +	pca9541,
> +};
> +
>   struct pca9541 {
>   	struct i2c_client *client;
> +	enum chip_id id;
>   	unsigned long select_timeout;
>   	unsigned long arb_timeout;
>   };
> @@ -188,10 +193,13 @@ static int pca9541_reg_read(struct i2c_client *client, u8 command)
>    */
>   
>   /* Release bus. Also reset NTESTON and BUSINIT if it was set. */
> -static void pca9541_release_bus(struct i2c_client *client)
> +static void pca9541_release_bus(struct i2c_client *client, enum chip_id id)
>   {
>   	int reg;
>   
> +	if (id != pca9541)
> +		return;
> +
>   	reg = pca9541_reg_read(client, PCA9541_CONTROL);
>   	if (reg >= 0 && !pca9541_busoff(reg) && pca9541_mybus(reg))
>   		pca9541_reg_write(client, PCA9541_CONTROL,
> @@ -235,12 +243,15 @@ static const u8 pca9541_control[16] = {
>    *  0 : bus not acquired
>    *  1 : bus acquired
>    */
> -static int pca9541_arbitrate(struct i2c_client *client)
> +static int pca9541_arbitrate(struct i2c_client *client, enum chip_id id)
>   {
>   	struct i2c_mux_core *muxc = i2c_get_clientdata(client);
>   	struct pca9541 *data = i2c_mux_priv(muxc);
>   	int reg;
>   
> +	if (id != pca9541)
> +		return -EOPNOTSUPP;
> +
>   	reg = pca9541_reg_read(client, PCA9541_CONTROL);
>   	if (reg < 0)
>   		return reg;
> @@ -318,7 +329,7 @@ static int pca9541_select_chan(struct i2c_mux_core *muxc, u32 chan)
>   		/* force bus ownership after this time */
>   
>   	do {
> -		ret = pca9541_arbitrate(client);
> +		ret = pca9541_arbitrate(client, data->id);
>   		if (ret)
>   			return ret < 0 ? ret : 0;
>   
> @@ -336,7 +347,7 @@ static int pca9541_release_chan(struct i2c_mux_core *muxc, u32 chan)
>   	struct pca9541 *data = i2c_mux_priv(muxc);
>   	struct i2c_client *client = data->client;
>   
> -	pca9541_release_bus(client);
> +	pca9541_release_bus(client, data->id);
>   	return 0;
>   }
>   
> @@ -361,7 +372,7 @@ static int pca9541_probe(struct i2c_client *client,
>   	 * We have to lock the adapter before releasing the bus.
>   	 */
>   	i2c_lock_adapter(adap);
> -	pca9541_release_bus(client);
> +	pca9541_release_bus(client, pca9541);
>   	i2c_unlock_adapter(adap);
>   
>   	/* Create mux adapter */
> @@ -377,6 +388,7 @@ static int pca9541_probe(struct i2c_client *client,
>   
>   	data = i2c_mux_priv(muxc);
>   	data->client = client;
> +	data->id = pca9541;
>   
>   	i2c_set_clientdata(client, muxc);
>   
> ----8<----
> 
> 
>> Signed-off-by: Peter Rosin <peda@axentia.se>
>> ---
>>   drivers/i2c/muxes/i2c-mux-pca9541.c | 62 +++++++++++++++++++++++++++----------
>>   1 file changed, 45 insertions(+), 17 deletions(-)
>>
> 
> The change above is trivial and it does not cancel any further
> extensions similar to your idea, the open question is if there
> is a demand right at the moment.
> 
>> diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
>> index 47685eb4e0e9..cac629e36bf8 100644
>> --- a/drivers/i2c/muxes/i2c-mux-pca9541.c
>> +++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
>> @@ -23,6 +23,7 @@
>>   #include <linux/i2c-mux.h>
>>   #include <linux/jiffies.h>
>>   #include <linux/module.h>
>> +#include <linux/of_device.h>
>>   #include <linux/platform_data/pca954x.h>
>>   #include <linux/slab.h>
>>   
>> @@ -70,26 +71,22 @@
>>   #define SELECT_DELAY_SHORT	50
>>   #define SELECT_DELAY_LONG	1000
>>   
>> -struct pca9541 {
>> -	struct i2c_client *client;
>> -	unsigned long select_timeout;
>> -	unsigned long arb_timeout;
>> +enum chip_name {
> 
> chip_name sound like a string storage, chip_id might be better here.
> 
>> +	pca9541,
>>   };
>>   
> 
> --
> With best wishes,
> Vladimir
> 

  reply	other threads:[~2018-03-21  1:19 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-20  6:19 [PATCH linux dev-4.16 v2] i2c: muxes: pca9641: new driver Ken Chen
2018-03-20  6:34 ` Joel Stanley
2018-03-20  9:31 ` Peter Rosin
2018-03-20  9:31   ` [PATCH 1/3] i2c: mux: pca9541: use the BIT macro Peter Rosin
2018-03-20 13:18     ` Guenter Roeck
2018-03-20 23:25     ` Vladimir Zapolskiy
2018-03-20  9:31   ` [PATCH 2/3] i2c: mux: pca9541: namespace cleanup Peter Rosin
2018-03-20 13:20     ` Guenter Roeck
2018-03-20 21:48       ` Peter Rosin
2018-03-20 21:57         ` Guenter Roeck
2018-03-20 23:24     ` Vladimir Zapolskiy
2018-03-21  5:53       ` Peter Rosin
2018-03-21  6:54         ` Vladimir Zapolskiy
2018-03-21  7:35           ` Peter Rosin
2018-03-20  9:32   ` [PATCH 3/3] i2c: mux: pca9541: prepare for PCA9641 support Peter Rosin
2018-03-20 13:22     ` Guenter Roeck
2018-03-20 23:17     ` Vladimir Zapolskiy
2018-03-21  1:19       ` Guenter Roeck [this message]
2018-03-21  7:01         ` Vladimir Zapolskiy
2018-03-21  8:09           ` Peter Rosin
2018-03-21  7:05     ` Vladimir Zapolskiy
2018-04-11  9:37   ` [PATCH linux dev-4.16 v2] i2c: muxes: pca9641: new driver Peter Rosin
2018-04-13  6:59     ` ChenKenYY 陳永營 TAO
2018-04-13  7:27       ` Peter Rosin
2018-04-16  7:37         ` ChenKenYY 陳永營 TAO

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3cfc6e53-a86d-8ef1-b83d-9f3c1b3d7b9c@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=chen.kenyy@inventec.com \
    --cc=joel@jms.id.au \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peda@axentia.se \
    --cc=vz@mleia.com \
    --cc=wsa@the-dreams.de \
    --subject='Re: [PATCH 3/3] i2c: mux: pca9541: prepare for PCA9641 support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).