[PATCH v4 0/3] Add W83773G hwmon sensor driver and doc

[PATCH v4 0/3] Add W83773G hwmon sensor driver and doc

[Lei YU]

Nuvoton W83773G is a hardware monitoring chip, which integrates two remote
and one local temperature sensors.
---
v2:
 - The driver is re-written as v1's comment, so the author is changed to me.
 - Added the device to trivial-devices.txt
v3:
 - Update the driver to use new API devm_hwmon_device_register_with_info()
v4:
 - Fix review comments

Lei YU (3):
  DT: i2c: W83773G is a trivial device
  drivers: hwmon: Add W83773G driver
  hwmon: (w83773g) Add documentation

 .../devicetree/bindings/trivial-devices.txt        |   1 +
 Documentation/hwmon/w83773g                        |  33 +++
 drivers/hwmon/Kconfig                              |  10 +
 drivers/hwmon/Makefile                             |   1 +
 drivers/hwmon/w83773g.c                            | 329 +++++++++++++++++++++
 5 files changed, 374 insertions(+)
 create mode 100644 Documentation/hwmon/w83773g
 create mode 100644 drivers/hwmon/w83773g.c

-- 
1.9.1

[PATCH v4 1/3] DT: i2c: W83773G is a trivial device

[Lei YU]

Signed-off-by: Lei YU <mine260309@gmail.com>
---
 Documentation/devicetree/bindings/trivial-devices.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt
index af284fb..63ad2f1 100644
--- a/Documentation/devicetree/bindings/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/trivial-devices.txt
@@ -188,3 +188,4 @@ ti,tmp103		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Inter
 ti,tmp275		Digital Temperature Sensor
 winbond,w83793		Winbond/Nuvoton H/W Monitor
 winbond,wpct301		i2c trusted platform module (TPM)
+nuvoton,w83773g		Nuvoton Temperature Sensor
-- 
1.9.1

[PATCH v4 2/3] drivers: hwmon: Add W83773G driver

[Lei YU]

Nuvoton W83773G is a hardware monitor IC providing one local
temperature and two remote temperature sensors.

Signed-off-by: Lei YU <mine260309@gmail.com>
---
v2:
 - Rewrite the driver using regmap
 - Add offset and update_interval
v3:
 - Use devm_hwmon_device_register_with_info() with is_visible/read/write
   functions.
v4:
 - Fix review comments.
---
 drivers/hwmon/Kconfig   |  10 ++
 drivers/hwmon/Makefile  |   1 +
 drivers/hwmon/w83773g.c | 329 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 340 insertions(+)
 create mode 100644 drivers/hwmon/w83773g.c

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index d654314..11c6248 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1710,6 +1710,16 @@ config SENSORS_VT8231
 	  This driver can also be built as a module.  If so, the module
 	  will be called vt8231.
 
+config SENSORS_W83773G
+	tristate "Nuvoton W83773G"
+	depends on I2C
+	help
+	  If you say yes here you get support for the Nuvoton W83773G hardware
+	  monitoring chip.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called w83773g.
+
 config SENSORS_W83781D
 	tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
 	depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index c84d978..0649ad8 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_ATK0110)	+= asus_atk0110.o
 # asb100, then w83781d go first, as they can override other drivers' addresses.
 obj-$(CONFIG_SENSORS_ASB100)	+= asb100.o
 obj-$(CONFIG_SENSORS_W83627HF)	+= w83627hf.o
+obj-$(CONFIG_SENSORS_W83773G)	+= w83773g.o
 obj-$(CONFIG_SENSORS_W83792D)	+= w83792d.o
 obj-$(CONFIG_SENSORS_W83793)	+= w83793.o
 obj-$(CONFIG_SENSORS_W83795)	+= w83795.o
diff --git a/drivers/hwmon/w83773g.c b/drivers/hwmon/w83773g.c
new file mode 100644
index 0000000..0b97c28
--- /dev/null
+++ b/drivers/hwmon/w83773g.c
@@ -0,0 +1,329 @@
+/*
+ * Copyright (C) 2017 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Driver for the Nuvoton W83773G SMBus temperature sensor IC.
+ * Supported models: W83773G
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+/* W83773 has 3 channels */
+#define W83773_CHANNELS				3
+
+/* The W83773 registers */
+#define W83773_CONVERSION_RATE_REG_READ		0x04
+#define W83773_CONVERSION_RATE_REG_WRITE	0x0A
+#define W83773_MANUFACTURER_ID_REG		0xFE
+#define W83773_LOCAL_TEMP			0x00
+
+static const u8 W83773_STATUS[2] = { 0x02, 0x17 };
+
+static const u8 W83773_TEMP_LSB[2] = { 0x10, 0x25 };
+static const u8 W83773_TEMP_MSB[2] = { 0x01, 0x24 };
+
+static const u8 W83773_OFFSET_LSB[2] = { 0x12, 0x16 };
+static const u8 W83773_OFFSET_MSB[2] = { 0x11, 0x15 };
+
+/* this is the number of sensors in the device */
+static const struct i2c_device_id w83773_id[] = {
+	{ "w83773g" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, w83773_id);
+
+static const struct of_device_id w83773_of_match[] = {
+	{
+		.compatible = "nuvoton,w83773g"
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, w83773_of_match);
+
+static inline long temp_of_local(s8 reg)
+{
+	return reg * 1000;
+}
+
+static inline long temp_of_remote(s8 hb, u8 lb)
+{
+	return (hb << 3 | lb >> 5) * 125;
+}
+
+static int get_local_temp(struct regmap *regmap, long *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(regmap, W83773_LOCAL_TEMP, &regval);
+	if (ret < 0)
+		return ret;
+
+	*val = temp_of_local(regval);
+	return 0;
+}
+
+static int get_remote_temp(struct regmap *regmap, int index, long *val)
+{
+	unsigned int regval_high;
+	unsigned int regval_low;
+	int ret;
+
+	ret = regmap_read(regmap, W83773_TEMP_MSB[index], &regval_high);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, W83773_TEMP_LSB[index], &regval_low);
+	if (ret < 0)
+		return ret;
+
+	*val = temp_of_remote(regval_high, regval_low);
+	return 0;
+}
+
+static int get_fault(struct regmap *regmap, int index, long *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(regmap, W83773_STATUS[index], &regval);
+	if (ret < 0)
+		return ret;
+
+	*val = (u8)regval & 0x04 >> 2;
+	return 0;
+}
+
+static int get_offset(struct regmap *regmap, int index, long *val)
+{
+	unsigned int regval_high;
+	unsigned int regval_low;
+	int ret;
+
+	ret = regmap_read(regmap, W83773_OFFSET_MSB[index], &regval_high);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(regmap, W83773_OFFSET_LSB[index], &regval_low);
+	if (ret < 0)
+		return ret;
+
+	*val = temp_of_remote(regval_high, regval_low);
+	return 0;
+}
+
+static int set_offset(struct regmap *regmap, int index, long val)
+{
+	int ret;
+	u8 high_byte;
+	u8 low_byte;
+
+	val = clamp_val(val, -127825, 127825);
+	/* offset value equals to (high_byte << 3 | low_byte >> 5) * 125 */
+	val /= 125;
+	high_byte = val >> 3;
+	low_byte = (val & 0x07) << 5;
+
+	ret = regmap_write(regmap, W83773_OFFSET_MSB[index], high_byte);
+	if (ret < 0)
+		return ret;
+
+	return regmap_write(regmap, W83773_OFFSET_LSB[index], low_byte);
+}
+
+static int get_update_interval(struct regmap *regmap, long *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(regmap, W83773_CONVERSION_RATE_REG_READ, &regval);
+	if (ret < 0)
+		return ret;
+
+	*val = 16000 >> regval;
+	return 0;
+}
+
+static int set_update_interval(struct regmap *regmap, long val)
+{
+	int rate;
+
+	/*
+	 * For valid rates, interval can be calculated as
+	 *	interval = (1 << (8 - rate)) * 62.5;
+	 * Rounded rate is therefore
+	 *	rate = 8 - __fls(interval * 8 / (62.5 * 7));
+	 * Use clamp_val() to avoid overflows, and to ensure valid input
+	 * for __fls.
+	 */
+	val = clamp_val(val, 62, 16000) * 10;
+	rate = 8 - __fls((val * 8 / (625 * 7)));
+	return regmap_write(regmap, W83773_CONVERSION_RATE_REG_WRITE, rate);
+}
+
+static int w83773_read(struct device *dev, enum hwmon_sensor_types type,
+		       u32 attr, int channel, long *val)
+{
+	struct regmap *regmap = dev_get_drvdata(dev);
+
+	if (type == hwmon_chip) {
+		if (attr == hwmon_chip_update_interval)
+			return get_update_interval(regmap, val);
+		return -EOPNOTSUPP;
+	}
+
+	switch (attr) {
+	case hwmon_temp_input:
+		if (channel == 0)
+			return get_local_temp(regmap, val);
+		return get_remote_temp(regmap, channel - 1, val);
+	case hwmon_temp_fault:
+		return get_fault(regmap, channel - 1, val);
+	case hwmon_temp_offset:
+		return get_offset(regmap, channel - 1, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int w83773_write(struct device *dev, enum hwmon_sensor_types type,
+			u32 attr, int channel, long val)
+{
+	struct regmap *regmap = dev_get_drvdata(dev);
+
+	if (type == hwmon_chip && attr == hwmon_chip_update_interval)
+		return set_update_interval(regmap, val);
+
+	if (type == hwmon_temp && attr == hwmon_temp_offset)
+		return set_offset(regmap, channel - 1, val);
+
+	return -EOPNOTSUPP;
+}
+
+static umode_t w83773_is_visible(const void *data, enum hwmon_sensor_types type,
+				 u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_chip:
+		switch (attr) {
+		case hwmon_chip_update_interval:
+			return 0644;
+		}
+		break;
+	case hwmon_temp:
+		switch (attr) {
+		case hwmon_temp_input:
+		case hwmon_temp_fault:
+			return 0444;
+		case hwmon_temp_offset:
+			return 0644;
+		}
+		break;
+	default:
+		break;
+	}
+	return 0;
+}
+
+static const u32 w83773_chip_config[] = {
+	HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL,
+	0
+};
+
+static const struct hwmon_channel_info w83773_chip = {
+	.type = hwmon_chip,
+	.config = w83773_chip_config,
+};
+
+static const u32 w83773_temp_config[] = {
+	HWMON_T_INPUT,
+	HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET,
+	HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET,
+	0
+};
+
+static const struct hwmon_channel_info w83773_temp = {
+	.type = hwmon_temp,
+	.config = w83773_temp_config,
+};
+
+static const struct hwmon_channel_info *w83773_info[] = {
+	&w83773_chip,
+	&w83773_temp,
+	NULL
+};
+
+static const struct hwmon_ops w83773_ops = {
+	.is_visible = w83773_is_visible,
+	.read = w83773_read,
+	.write = w83773_write,
+};
+
+static const struct hwmon_chip_info w83773_chip_info = {
+	.ops = &w83773_ops,
+	.info = w83773_info,
+};
+
+static const struct regmap_config w83773_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int w83773_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device *hwmon_dev;
+	struct regmap *regmap;
+	int ret;
+
+	regmap = devm_regmap_init_i2c(client, &w83773_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "failed to allocate register map\n");
+		return PTR_ERR(regmap);
+	}
+
+	/* Set the conversion rate to 2 Hz */
+	ret = regmap_write(regmap, W83773_CONVERSION_RATE_REG_WRITE, 0x05);
+	if (ret < 0) {
+		dev_err(&client->dev, "error writing config rate register\n");
+		return ret;
+	}
+
+	i2c_set_clientdata(client, regmap);
+
+	hwmon_dev = devm_hwmon_device_register_with_info(dev,
+							 client->name,
+							 regmap,
+							 &w83773_chip_info,
+							 NULL);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static struct i2c_driver w83773_driver = {
+	.class = I2C_CLASS_HWMON,
+	.driver = {
+		.name	= "w83773g",
+		.of_match_table = of_match_ptr(w83773_of_match),
+	},
+	.probe = w83773_probe,
+	.id_table = w83773_id,
+};
+
+module_i2c_driver(w83773_driver);
+
+MODULE_AUTHOR("Lei YU <mine260309@gmail.com>");
+MODULE_DESCRIPTION("W83773G temperature sensor driver");
+MODULE_LICENSE("GPL");
-- 
1.9.1

[PATCH v4 3/3] hwmon: (w83773g) Add documentation

[Lei YU]

Add documentation for the w83773g driver.

Signed-off-by: Lei YU <mine260309@gmail.com>
---
v2:
 - Add notes for offset and update_interval
---
 Documentation/hwmon/w83773g | 33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/hwmon/w83773g

diff --git a/Documentation/hwmon/w83773g b/Documentation/hwmon/w83773g
new file mode 100644
index 0000000..4cc6c0b
--- /dev/null
+++ b/Documentation/hwmon/w83773g
@@ -0,0 +1,33 @@
+Kernel driver w83773g
+====================
+
+Supported chips:
+  * Nuvoton W83773G
+    Prefix: 'w83773g'
+    Addresses scanned: I2C 0x4c and 0x4d
+    Datasheet: https://www.nuvoton.com/resource-files/W83773G_SG_DatasheetV1_2.pdf
+
+Authors:
+	Lei YU <mine260309@gmail.com>
+
+Description
+-----------
+
+This driver implements support for Nuvoton W83773G temperature sensor
+chip. This chip implements one local and two remote sensors.
+The chip also features offsets for the two remote sensors which get added to
+the input readings. The chip does all the scaling by itself and the driver
+therefore reports true temperatures that don't need any user-space adjustments.
+Temperature is measured in degrees Celsius.
+The chip is wired over I2C/SMBus and specified over a temperature
+range of -40 to +125 degrees Celsius (for local sensor) and -40 to +127
+degrees Celsius (for remote sensors).
+Resolution for both the local and remote channels is 0.125 degree C.
+
+The chip supports only temperature measurement. The driver exports
+the temperature values via the following sysfs files:
+
+temp[1-3]_input
+temp[2-3]_fault
+temp[2-3]_offset
+update_interval
-- 
1.9.1

Re: [PATCH v4 1/3] DT: i2c: W83773G is a trivial device

[Rob Herring]

On Mon, Nov 13, 2017 at 11:27:32AM +0800, Lei YU wrote:
> Signed-off-by: Lei YU <mine260309@gmail.com>
> ---
>  Documentation/devicetree/bindings/trivial-devices.txt | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt
> index af284fb..63ad2f1 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.txt
> +++ b/Documentation/devicetree/bindings/trivial-devices.txt
> @@ -188,3 +188,4 @@ ti,tmp103		Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Inter
>  ti,tmp275		Digital Temperature Sensor
>  winbond,w83793		Winbond/Nuvoton H/W Monitor
>  winbond,wpct301		i2c trusted platform module (TPM)
> +nuvoton,w83773g		Nuvoton Temperature Sensor

Keep alphabetical order please.

Send trivial-devices.txt changes separately to me and I'll take them to 
avoid any conflicts.

Rob

Re: [v4,2/3] drivers: hwmon: Add W83773G driver

[Guenter Roeck]

On Mon, Nov 13, 2017 at 11:27:33AM +0800, Lei YU wrote:
> Nuvoton W83773G is a hardware monitor IC providing one local
> temperature and two remote temperature sensors.
> 
> Signed-off-by: Lei YU <mine260309@gmail.com>

Applied to hwmon-next.

Thanks,
Guenter

> ---
> v2:
>  - Rewrite the driver using regmap
>  - Add offset and update_interval
> v3:
>  - Use devm_hwmon_device_register_with_info() with is_visible/read/write
>    functions.
> v4:
>  - Fix review comments.
> ---
>  drivers/hwmon/Kconfig   |  10 ++
>  drivers/hwmon/Makefile  |   1 +
>  drivers/hwmon/w83773g.c | 329 ++++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 340 insertions(+)
>  create mode 100644 drivers/hwmon/w83773g.c
> 
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index d654314..11c6248 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1710,6 +1710,16 @@ config SENSORS_VT8231
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called vt8231.
>  
> +config SENSORS_W83773G
> +	tristate "Nuvoton W83773G"
> +	depends on I2C
> +	help
> +	  If you say yes here you get support for the Nuvoton W83773G hardware
> +	  monitoring chip.
> +
> +	  This driver can also be built as a module.  If so, the module
> +	  will be called w83773g.
> +
>  config SENSORS_W83781D
>  	tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
>  	depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index c84d978..0649ad8 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_ATK0110)	+= asus_atk0110.o
>  # asb100, then w83781d go first, as they can override other drivers' addresses.
>  obj-$(CONFIG_SENSORS_ASB100)	+= asb100.o
>  obj-$(CONFIG_SENSORS_W83627HF)	+= w83627hf.o
> +obj-$(CONFIG_SENSORS_W83773G)	+= w83773g.o
>  obj-$(CONFIG_SENSORS_W83792D)	+= w83792d.o
>  obj-$(CONFIG_SENSORS_W83793)	+= w83793.o
>  obj-$(CONFIG_SENSORS_W83795)	+= w83795.o
> diff --git a/drivers/hwmon/w83773g.c b/drivers/hwmon/w83773g.c
> new file mode 100644
> index 0000000..0b97c28
> --- /dev/null
> +++ b/drivers/hwmon/w83773g.c
> @@ -0,0 +1,329 @@
> +/*
> + * Copyright (C) 2017 IBM Corp.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * Driver for the Nuvoton W83773G SMBus temperature sensor IC.
> + * Supported models: W83773G
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/hwmon.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/err.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +
> +/* W83773 has 3 channels */
> +#define W83773_CHANNELS				3
> +
> +/* The W83773 registers */
> +#define W83773_CONVERSION_RATE_REG_READ		0x04
> +#define W83773_CONVERSION_RATE_REG_WRITE	0x0A
> +#define W83773_MANUFACTURER_ID_REG		0xFE
> +#define W83773_LOCAL_TEMP			0x00
> +
> +static const u8 W83773_STATUS[2] = { 0x02, 0x17 };
> +
> +static const u8 W83773_TEMP_LSB[2] = { 0x10, 0x25 };
> +static const u8 W83773_TEMP_MSB[2] = { 0x01, 0x24 };
> +
> +static const u8 W83773_OFFSET_LSB[2] = { 0x12, 0x16 };
> +static const u8 W83773_OFFSET_MSB[2] = { 0x11, 0x15 };
> +
> +/* this is the number of sensors in the device */
> +static const struct i2c_device_id w83773_id[] = {
> +	{ "w83773g" },
> +	{ }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, w83773_id);
> +
> +static const struct of_device_id w83773_of_match[] = {
> +	{
> +		.compatible = "nuvoton,w83773g"
> +	},
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, w83773_of_match);
> +
> +static inline long temp_of_local(s8 reg)
> +{
> +	return reg * 1000;
> +}
> +
> +static inline long temp_of_remote(s8 hb, u8 lb)
> +{
> +	return (hb << 3 | lb >> 5) * 125;
> +}
> +
> +static int get_local_temp(struct regmap *regmap, long *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(regmap, W83773_LOCAL_TEMP, &regval);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = temp_of_local(regval);
> +	return 0;
> +}
> +
> +static int get_remote_temp(struct regmap *regmap, int index, long *val)
> +{
> +	unsigned int regval_high;
> +	unsigned int regval_low;
> +	int ret;
> +
> +	ret = regmap_read(regmap, W83773_TEMP_MSB[index], &regval_high);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_read(regmap, W83773_TEMP_LSB[index], &regval_low);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = temp_of_remote(regval_high, regval_low);
> +	return 0;
> +}
> +
> +static int get_fault(struct regmap *regmap, int index, long *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(regmap, W83773_STATUS[index], &regval);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = (u8)regval & 0x04 >> 2;
> +	return 0;
> +}
> +
> +static int get_offset(struct regmap *regmap, int index, long *val)
> +{
> +	unsigned int regval_high;
> +	unsigned int regval_low;
> +	int ret;
> +
> +	ret = regmap_read(regmap, W83773_OFFSET_MSB[index], &regval_high);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_read(regmap, W83773_OFFSET_LSB[index], &regval_low);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = temp_of_remote(regval_high, regval_low);
> +	return 0;
> +}
> +
> +static int set_offset(struct regmap *regmap, int index, long val)
> +{
> +	int ret;
> +	u8 high_byte;
> +	u8 low_byte;
> +
> +	val = clamp_val(val, -127825, 127825);
> +	/* offset value equals to (high_byte << 3 | low_byte >> 5) * 125 */
> +	val /= 125;
> +	high_byte = val >> 3;
> +	low_byte = (val & 0x07) << 5;
> +
> +	ret = regmap_write(regmap, W83773_OFFSET_MSB[index], high_byte);
> +	if (ret < 0)
> +		return ret;
> +
> +	return regmap_write(regmap, W83773_OFFSET_LSB[index], low_byte);
> +}
> +
> +static int get_update_interval(struct regmap *regmap, long *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(regmap, W83773_CONVERSION_RATE_REG_READ, &regval);
> +	if (ret < 0)
> +		return ret;
> +
> +	*val = 16000 >> regval;
> +	return 0;
> +}
> +
> +static int set_update_interval(struct regmap *regmap, long val)
> +{
> +	int rate;
> +
> +	/*
> +	 * For valid rates, interval can be calculated as
> +	 *	interval = (1 << (8 - rate)) * 62.5;
> +	 * Rounded rate is therefore
> +	 *	rate = 8 - __fls(interval * 8 / (62.5 * 7));
> +	 * Use clamp_val() to avoid overflows, and to ensure valid input
> +	 * for __fls.
> +	 */
> +	val = clamp_val(val, 62, 16000) * 10;
> +	rate = 8 - __fls((val * 8 / (625 * 7)));
> +	return regmap_write(regmap, W83773_CONVERSION_RATE_REG_WRITE, rate);
> +}
> +
> +static int w83773_read(struct device *dev, enum hwmon_sensor_types type,
> +		       u32 attr, int channel, long *val)
> +{
> +	struct regmap *regmap = dev_get_drvdata(dev);
> +
> +	if (type == hwmon_chip) {
> +		if (attr == hwmon_chip_update_interval)
> +			return get_update_interval(regmap, val);
> +		return -EOPNOTSUPP;
> +	}
> +
> +	switch (attr) {
> +	case hwmon_temp_input:
> +		if (channel == 0)
> +			return get_local_temp(regmap, val);
> +		return get_remote_temp(regmap, channel - 1, val);
> +	case hwmon_temp_fault:
> +		return get_fault(regmap, channel - 1, val);
> +	case hwmon_temp_offset:
> +		return get_offset(regmap, channel - 1, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int w83773_write(struct device *dev, enum hwmon_sensor_types type,
> +			u32 attr, int channel, long val)
> +{
> +	struct regmap *regmap = dev_get_drvdata(dev);
> +
> +	if (type == hwmon_chip && attr == hwmon_chip_update_interval)
> +		return set_update_interval(regmap, val);
> +
> +	if (type == hwmon_temp && attr == hwmon_temp_offset)
> +		return set_offset(regmap, channel - 1, val);
> +
> +	return -EOPNOTSUPP;
> +}
> +
> +static umode_t w83773_is_visible(const void *data, enum hwmon_sensor_types type,
> +				 u32 attr, int channel)
> +{
> +	switch (type) {
> +	case hwmon_chip:
> +		switch (attr) {
> +		case hwmon_chip_update_interval:
> +			return 0644;
> +		}
> +		break;
> +	case hwmon_temp:
> +		switch (attr) {
> +		case hwmon_temp_input:
> +		case hwmon_temp_fault:
> +			return 0444;
> +		case hwmon_temp_offset:
> +			return 0644;
> +		}
> +		break;
> +	default:
> +		break;
> +	}
> +	return 0;
> +}
> +
> +static const u32 w83773_chip_config[] = {
> +	HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL,
> +	0
> +};
> +
> +static const struct hwmon_channel_info w83773_chip = {
> +	.type = hwmon_chip,
> +	.config = w83773_chip_config,
> +};
> +
> +static const u32 w83773_temp_config[] = {
> +	HWMON_T_INPUT,
> +	HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET,
> +	HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET,
> +	0
> +};
> +
> +static const struct hwmon_channel_info w83773_temp = {
> +	.type = hwmon_temp,
> +	.config = w83773_temp_config,
> +};
> +
> +static const struct hwmon_channel_info *w83773_info[] = {
> +	&w83773_chip,
> +	&w83773_temp,
> +	NULL
> +};
> +
> +static const struct hwmon_ops w83773_ops = {
> +	.is_visible = w83773_is_visible,
> +	.read = w83773_read,
> +	.write = w83773_write,
> +};
> +
> +static const struct hwmon_chip_info w83773_chip_info = {
> +	.ops = &w83773_ops,
> +	.info = w83773_info,
> +};
> +
> +static const struct regmap_config w83773_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +};
> +
> +static int w83773_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct device *dev = &client->dev;
> +	struct device *hwmon_dev;
> +	struct regmap *regmap;
> +	int ret;
> +
> +	regmap = devm_regmap_init_i2c(client, &w83773_regmap_config);
> +	if (IS_ERR(regmap)) {
> +		dev_err(dev, "failed to allocate register map\n");
> +		return PTR_ERR(regmap);
> +	}
> +
> +	/* Set the conversion rate to 2 Hz */
> +	ret = regmap_write(regmap, W83773_CONVERSION_RATE_REG_WRITE, 0x05);
> +	if (ret < 0) {
> +		dev_err(&client->dev, "error writing config rate register\n");
> +		return ret;
> +	}
> +
> +	i2c_set_clientdata(client, regmap);
> +
> +	hwmon_dev = devm_hwmon_device_register_with_info(dev,
> +							 client->name,
> +							 regmap,
> +							 &w83773_chip_info,
> +							 NULL);
> +	return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static struct i2c_driver w83773_driver = {
> +	.class = I2C_CLASS_HWMON,
> +	.driver = {
> +		.name	= "w83773g",
> +		.of_match_table = of_match_ptr(w83773_of_match),
> +	},
> +	.probe = w83773_probe,
> +	.id_table = w83773_id,
> +};
> +
> +module_i2c_driver(w83773_driver);
> +
> +MODULE_AUTHOR("Lei YU <mine260309@gmail.com>");
> +MODULE_DESCRIPTION("W83773G temperature sensor driver");
> +MODULE_LICENSE("GPL");

Re: [v4,3/3] hwmon: (w83773g) Add documentation

[Guenter Roeck]

On Mon, Nov 13, 2017 at 11:27:34AM +0800, Lei YU wrote:
> Add documentation for the w83773g driver.
> 
> Signed-off-by: Lei YU <mine260309@gmail.com>

Applied to hwmon-next.

Thanks,
Guenter

Re: [v4,2/3] drivers: hwmon: Add W83773G driver

[Joel Stanley]

On Sun, Nov 19, 2017 at 2:45 AM, Guenter Roeck <linux@roeck-us.net> wrote:
> On Mon, Nov 13, 2017 at 11:27:33AM +0800, Lei YU wrote:
>> Nuvoton W83773G is a hardware monitor IC providing one local
>> temperature and two remote temperature sensors.
>>
>> Signed-off-by: Lei YU <mine260309@gmail.com>
>
> Applied to hwmon-next.

Where does hwmon-next live? I was looking on kernel.org and I can't
seem to find it.

Cheers,

Joel

Re: [v4,2/3] drivers: hwmon: Add W83773G driver

[Guenter Roeck]

On 11/22/2017 10:32 PM, Joel Stanley wrote:
> On Sun, Nov 19, 2017 at 2:45 AM, Guenter Roeck <linux@roeck-us.net> wrote:
>> On Mon, Nov 13, 2017 at 11:27:33AM +0800, Lei YU wrote:
>>> Nuvoton W83773G is a hardware monitor IC providing one local
>>> temperature and two remote temperature sensors.
>>>
>>> Signed-off-by: Lei YU <mine260309@gmail.com>
>>
>> Applied to hwmon-next.
> 
> Where does hwmon-next live? I was looking on kernel.org and I can't
> seem to find it.
> 
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git
branch hwmon-next, but I('ll only push it after the commit window closes.

Guenter