LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
To: "Sam Protsenko" <semen.protsenko@linaro.org>,
	"Sylwester Nawrocki" <s.nawrocki@samsung.com>,
	"Chanwoo Choi" <cw00.choi@samsung.com>,
	"Linus Walleij" <linus.walleij@linaro.org>,
	"Tomasz Figa" <tomasz.figa@gmail.com>,
	"Paweł Chmiel" <pawel.mikolaj.chmiel@gmail.com>
Cc: Marc Zyngier <maz@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Jiri Slaby <jirislaby@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Charles Keepax <ckeepax@opensource.wolfsonmicro.com>,
	Ryu Euiyoul <ryu.real@samsung.com>,
	Tom Gall <tom.gall@linaro.org>,
	Sumit Semwal <sumit.semwal@linaro.org>,
	John Stultz <john.stultz@linaro.org>,
	Amit Pundir <amit.pundir@linaro.org>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
	linux-serial@vger.kernel.org
Subject: Re: [PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data
Date: Mon, 9 Aug 2021 12:43:34 +0200	[thread overview]
Message-ID: <407ee65f-6004-5173-9fcc-99023c85db4e@canonical.com> (raw)
In-Reply-To: <20210806152146.16107-3-semen.protsenko@linaro.org>

On 06/08/2021 17:21, Sam Protsenko wrote:
> Add Samsung Exynos850 SoC specific data to enable pinctrl support for
> all platforms based on Exynos850.
> 
> Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
> ---
> Changes in v2:
>   - Removed .suspend/.resume callbacks, as retention registers are not
>     implemented yet for Exynos850
>   - Removed .eint_gpio_init for AUD domain, as there are no external
>     interrupts available for that domain
> 
>  .../pinctrl/samsung/pinctrl-exynos-arm64.c    | 116 ++++++++++++++++++
>  drivers/pinctrl/samsung/pinctrl-exynos.h      |  29 +++++
>  drivers/pinctrl/samsung/pinctrl-samsung.c     |   2 +
>  drivers/pinctrl/samsung/pinctrl-samsung.h     |   1 +
>  4 files changed, 148 insertions(+)
> 
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> index b6e56422a700..3157bdf0233c 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos-arm64.c
> @@ -40,6 +40,24 @@ static const struct samsung_pin_bank_type exynos5433_bank_type_alive = {
>  	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
>  };
>  
> +/*
> + * Bank type for non-alive type. Bit fields:
> + * CON: 4, DAT: 1, PUD: 4, DRV: 4, CONPDN: 2, PUDPDN: 4
> + */
> +static struct samsung_pin_bank_type exynos850_bank_type_off  = {
> +	.fld_width = { 4, 1, 4, 4, 2, 4, },
> +	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, },
> +};
> +
> +/*
> + * Bank type for alive type. Bit fields:
> + * CON: 4, DAT: 1, PUD: 4, DRV: 4
> + */
> +static struct samsung_pin_bank_type exynos850_bank_type_alive = {

I missed that part last time - this and one before should be const.

> +	.fld_width = { 4, 1, 4, 4, },
> +	.reg_offset = { 0x00, 0x04, 0x08, 0x0c, },
> +};
> +
>  /* Pad retention control code for accessing PMU regmap */
>  static atomic_t exynos_shared_retention_refcnt;
>  
> @@ -422,3 +440,101 @@ const struct samsung_pinctrl_of_match_data exynos7_of_data __initconst = {
>  	.ctrl		= exynos7_pin_ctrl,
>  	.num_ctrl	= ARRAY_SIZE(exynos7_pin_ctrl),
>  };
> +
> +/* pin banks of exynos850 pin-controller 0 (ALIVE) */
> +static struct samsung_pin_bank_data exynos850_pin_banks0[] = {

All these as well - initconst - unless they are somehow different than
rest of such structures?

> +	/* Must start with EINTG banks, ordered by EINT group number. */
> +	EXYNOS9_PIN_BANK_EINTW(8, 0x000, "gpa0", 0x00),
> +	EXYNOS9_PIN_BANK_EINTW(8, 0x020, "gpa1", 0x04),
> +	EXYNOS9_PIN_BANK_EINTW(8, 0x040, "gpa2", 0x08),
> +	EXYNOS9_PIN_BANK_EINTW(8, 0x060, "gpa3", 0x0c),
> +	EXYNOS9_PIN_BANK_EINTW(4, 0x080, "gpa4", 0x10),
> +	EXYNOS9_PIN_BANK_EINTN(3, 0x0A0, "gpq0"),
> +};
> +
> +/* pin banks of exynos850 pin-controller 1 (CMGP) */
> +static struct samsung_pin_bank_data exynos850_pin_banks1[] = {
> +	/* Must start with EINTG banks, ordered by EINT group number. */
> +	EXYNOS9_PIN_BANK_EINTW(1, 0x000, "gpm0", 0x00),
> +	EXYNOS9_PIN_BANK_EINTW(1, 0x020, "gpm1", 0x04),
> +	EXYNOS9_PIN_BANK_EINTW(1, 0x040, "gpm2", 0x08),
> +	EXYNOS9_PIN_BANK_EINTW(1, 0x060, "gpm3", 0x0C),
> +	EXYNOS9_PIN_BANK_EINTW(1, 0x080, "gpm4", 0x10),
> +	EXYNOS9_PIN_BANK_EINTW(1, 0x0A0, "gpm5", 0x14),
> +	EXYNOS9_PIN_BANK_EINTW(1, 0x0C0, "gpm6", 0x18),
> +	EXYNOS9_PIN_BANK_EINTW(1, 0x0E0, "gpm7", 0x1C),
> +};
> +
> +/* pin banks of exynos850 pin-controller 2 (AUD) */
> +static struct samsung_pin_bank_data exynos850_pin_banks2[] = {
> +	/* Must start with EINTG banks, ordered by EINT group number. */
> +	EXYNOS9_PIN_BANK_EINTG(5, 0x000, "gpb0", 0x00),
> +	EXYNOS9_PIN_BANK_EINTG(5, 0x020, "gpb1", 0x04),
> +};
> +
> +/* pin banks of exynos850 pin-controller 3 (HSI) */
> +static struct samsung_pin_bank_data exynos850_pin_banks3[] = {
> +	/* Must start with EINTG banks, ordered by EINT group number. */
> +	EXYNOS9_PIN_BANK_EINTG(6, 0x000, "gpf2", 0x00),
> +};
> +
> +/* pin banks of exynos850 pin-controller 4 (CORE) */
> +static struct samsung_pin_bank_data exynos850_pin_banks4[] = {
> +	/* Must start with EINTG banks, ordered by EINT group number. */
> +	EXYNOS9_PIN_BANK_EINTG(4, 0x000, "gpf0", 0x00),
> +	EXYNOS9_PIN_BANK_EINTG(8, 0x020, "gpf1", 0x04),
> +};
> +
> +/* pin banks of exynos850 pin-controller 5 (PERI) */
> +static struct samsung_pin_bank_data exynos850_pin_banks5[] = {
> +	/* Must start with EINTG banks, ordered by EINT group number. */
> +	EXYNOS9_PIN_BANK_EINTG(2, 0x000, "gpg0", 0x00),
> +	EXYNOS9_PIN_BANK_EINTG(6, 0x020, "gpp0", 0x04),
> +	EXYNOS9_PIN_BANK_EINTG(4, 0x040, "gpp1", 0x08),
> +	EXYNOS9_PIN_BANK_EINTG(4, 0x060, "gpp2", 0x0C),
> +	EXYNOS9_PIN_BANK_EINTG(8, 0x080, "gpg1", 0x10),
> +	EXYNOS9_PIN_BANK_EINTG(8, 0x0A0, "gpg2", 0x14),
> +	EXYNOS9_PIN_BANK_EINTG(1, 0x0C0, "gpg3", 0x18),
> +	EXYNOS9_PIN_BANK_EINTG(3, 0x0E0, "gpc0", 0x1C),
> +	EXYNOS9_PIN_BANK_EINTG(6, 0x100, "gpc1", 0x20),
> +};
> +
> +static const struct samsung_pin_ctrl exynos850_pin_ctrl[] __initconst = {
> +	{
> +		/* pin-controller instance 0 ALIVE data */
> +		.pin_banks	= exynos850_pin_banks0,
> +		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks0),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +		.eint_wkup_init = exynos_eint_wkup_init,
> +	}, {
> +		/* pin-controller instance 1 CMGP data */
> +		.pin_banks	= exynos850_pin_banks1,
> +		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks1),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +		.eint_wkup_init = exynos_eint_wkup_init,
> +	}, {
> +		/* pin-controller instance 2 AUD data */
> +		.pin_banks	= exynos850_pin_banks2,
> +		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks2),
> +	}, {
> +		/* pin-controller instance 3 HSI data */
> +		.pin_banks	= exynos850_pin_banks3,
> +		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks3),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +	}, {
> +		/* pin-controller instance 4 CORE data */
> +		.pin_banks	= exynos850_pin_banks4,
> +		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks4),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +	}, {
> +		/* pin-controller instance 5 PERI data */
> +		.pin_banks	= exynos850_pin_banks5,
> +		.nr_banks	= ARRAY_SIZE(exynos850_pin_banks5),
> +		.eint_gpio_init = exynos_eint_gpio_init,
> +	},
> +};
> +
> +const struct samsung_pinctrl_of_match_data exynos850_of_data __initconst = {
> +	.ctrl		= exynos850_pin_ctrl,
> +	.num_ctrl	= ARRAY_SIZE(exynos850_pin_ctrl),
> +};
> diff --git a/drivers/pinctrl/samsung/pinctrl-exynos.h b/drivers/pinctrl/samsung/pinctrl-exynos.h
> index da1ec13697e7..595086f2d5dd 100644
> --- a/drivers/pinctrl/samsung/pinctrl-exynos.h
> +++ b/drivers/pinctrl/samsung/pinctrl-exynos.h
> @@ -108,6 +108,35 @@
>  		.pctl_res_idx   = pctl_idx,			\
>  	}							\
>  
> +#define EXYNOS9_PIN_BANK_EINTN(pins, reg, id)			\
> +	{							\
> +		.type		= &exynos850_bank_type_alive,	\

Having the prefix EXYNOS9 is actually confusing because:
1. There is no Exynos9 support,
2. The type is exynos850.

Let's keep it consistent, so 850 everywhere,

> +		.pctl_offset	= reg,				\
> +		.nr_pins	= pins,				\
> +		.eint_type	= EINT_TYPE_NONE,		\
> +		.name		= id				\
> +	}
> +
> +#define EXYNOS9_PIN_BANK_EINTG(pins, reg, id, offs)		\
> +	{							\
> +		.type		= &exynos850_bank_type_off,	\
> +		.pctl_offset	= reg,				\
> +		.nr_pins	= pins,				\
> +		.eint_type	= EINT_TYPE_GPIO,		\
> +		.eint_offset	= offs,				\
> +		.name		= id				\
> +	}
> +
> +#define EXYNOS9_PIN_BANK_EINTW(pins, reg, id, offs)		\
> +	{							\
> +		.type		= &exynos850_bank_type_alive,	\
> +		.pctl_offset	= reg,				\
> +		.nr_pins	= pins,				\
> +		.eint_type	= EINT_TYPE_WKUP,		\
> +		.eint_offset	= offs,				\
> +		.name		= id				\
> +	}
> +

Best regards,
Krzysztof

  reply	other threads:[~2021-08-09 10:44 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-06 15:21 [PATCH v2 0/8] Add minimal support for Exynos850 SoC Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 1/8] dt-bindings: pinctrl: samsung: Add Exynos850 doc Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data Sam Protsenko
2021-08-09 10:43   ` Krzysztof Kozlowski [this message]
2021-08-09 18:18     ` Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 3/8] dt-bindings: serial: samsung: Add Exynos850 doc Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 4/8] tty: serial: samsung: Init USI to keep clocks running Sam Protsenko
2021-08-09 10:45   ` Krzysztof Kozlowski
2021-08-06 15:21 ` [PATCH v2 5/8] tty: serial: samsung: Fix driver data macros style Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 6/8] tty: serial: samsung: Add Exynos850 SoC data Sam Protsenko
2021-08-09 10:46   ` Krzysztof Kozlowski
2021-08-06 15:21 ` [PATCH v2 7/8] clk: samsung: Add Exynos850 clock driver stub Sam Protsenko
2021-08-09 10:55   ` Krzysztof Kozlowski
2021-08-09 18:51     ` Sam Protsenko
2021-08-09 11:22   ` Krzysztof Kozlowski
2021-08-09 19:48     ` Sam Protsenko
2021-08-10  7:55       ` Sylwester Nawrocki
2021-08-11 11:20         ` Sam Protsenko
2021-08-06 15:21 ` [PATCH v2 8/8] arm64: dts: exynos: Add Exynos850 SoC support Sam Protsenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=407ee65f-6004-5173-9fcc-99023c85db4e@canonical.com \
    --to=krzysztof.kozlowski@canonical.com \
    --cc=amit.pundir@linaro.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jirislaby@kernel.org \
    --cc=john.stultz@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=maz@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=pawel.mikolaj.chmiel@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=ryu.real@samsung.com \
    --cc=s.nawrocki@samsung.com \
    --cc=sboyd@kernel.org \
    --cc=semen.protsenko@linaro.org \
    --cc=sumit.semwal@linaro.org \
    --cc=tom.gall@linaro.org \
    --cc=tomasz.figa@gmail.com \
    --subject='Re: [PATCH v2 2/8] pinctrl: samsung: Add Exynos850 SoC specific data' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).