From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S261897AbUEQQgY (ORCPT ); Mon, 17 May 2004 12:36:24 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S261904AbUEQQgX (ORCPT ); Mon, 17 May 2004 12:36:23 -0400 Received: from wasp.conceptual.net.au ([203.190.192.17]:35718 "EHLO wasp.net.au") by vger.kernel.org with ESMTP id S261897AbUEQQer (ORCPT ); Mon, 17 May 2004 12:34:47 -0400 Message-ID: <40A8E9A8.3080100@wasp.net.au> Date: Mon, 17 May 2004 20:34:48 +0400 From: Brad Campbell User-Agent: Mozilla Thunderbird 0.6 (X11/20040502) X-Accept-Language: en-us, en Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=_wasp.net.au-22852-1084811684-0001-2" To: linux-kernel@vger.kernel.org Subject: libata 2.6.5->2.6.6 regression -part II Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org This is a MIME-formatted message. If you see this text it means that your E-mail software does not support MIME-formatted messages. --=_wasp.net.au-22852-1084811684-0001-2 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit G'day all, I caught the suggestion on my last post in the archives, but because I'm not subscribed and wasn't cc'd I can't keep it threaded. I tried backing out the suggested acpi patch (No difference at all), and I managed to get apic to work but it still hangs solid in the same place. dmesg attached. I managed to figure out that the VIA ATA driver captures my sata drives on the via ports, explaining why sata_via misses them, but writing data to those drives (hde & hdg) causes dma timeouts and locks the machine. No useful debug info produced. The machine becomes non-responsive, throws a couple of dma timeouts to the console and then loses all interactivity (keyboard, serial, network) forcing a reset push. Is there any way I can prevent the VIA ATA driver capturing this device? Unfortunately my boot drive is on hda on the on-board VIA ATA interface so I need it compiled in. Please CC: me on any replies. Regards, Brad --=_wasp.net.au-22852-1084811684-0001-2 Content-Type: text/plain; name="2.6.6.dmesg.2"; charset=iso-8859-1 Content-Transfer-Encoding: quoted-printable Content-Disposition: inline; filename="2.6.6.dmesg.2" nfsd: last server has exited nfsd: unexporting all filesystems rpciod: active tasks at shutdown?! RPC: error 5 connecting to server localhost RPC: failed to contact portmap (errno -5). eth1: network connection down md: stopping all md devices. md: md0 switched to read-only mode. Restarting system. Press any key to continue. Press any key to continue. Press any key to continue. GNU GRUB version 0.94 (625K lower / 523248K upper memory) +------------------------------------------------------------------------= -+||||||||||||||||||||||||+----------------------------------------------= ---------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line. Debian GNU/Lin= ux, kernel 2.4.18-bf2.4 Debian GNU/Lin= ux, kernel 2.4.18-bf2.4 (recovery mode) 2.4.25 = 2.4.27-pre1 = Linux-2.6.5 = Linux-2.6.6 = Windows = Redhat 2.4.7-1= 0 = = = = The highlighte= d entry will be booted automatically in 5 seconds. = Linux-2.6.5 = Linux-2.6.6 = Booting 'Linux-2.6.6' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /usr/src/linux-2.6.6/arch/i386/boot/bzImage vga=3D1 console=3Dtty= S0,38400 c onsole=3Dtty0 root=3D/dev/hda1 [Linux-bzImage, setup=3D0x1200, size=3D0x177b2d] savedefault Linux version 2.6.6-bk3 (brad@srv) (gcc version 3.3.3 (Debian 20040401)) = #4 Mon May 17 20:08:40 GST 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009c400 (usable) BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fffc000 (usable) BIOS-e820: 000000001fffc000 - 000000001ffff000 (ACPI data) BIOS-e820: 000000001ffff000 - 0000000020000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 511MB LOWMEM available. On node 0 totalpages: 131068 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126972 pages, LIFO batch:16 HighMem zone: 0 pages, LIFO batch:1 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f62a0= ACPI: RSDT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc000= ACPI: FADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc0b2= ACPI: BOOT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc030= ACPI: MADT (v001 ASUS A7V600 0x42302e31 MSFT 0x31313031) @ 0x1fffc058= ACPI: DSDT (v001 ASUS A7V600 0x00001000 MSFT 0x0100000b) @ 0x00000000= ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:10 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0]) IOAPIC[0]: Assigned apic_id 2 IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Built 1 zonelists Kernel command line: vga=3D1 console=3DttyS0,38400 console=3Dtty0 root=3D= /dev/hda1 Initializing CPU#0 PID hash table entries: 2048 (order 11: 16384 bytes) Detected 1916.546 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x50 Memory: 516068k/524272k available (1988k kernel code, 7448k reserved, 912= k data, 148k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... = Ok. Calibrating delay loop... 3776.51 BogoMIPS Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(TM) XP 2600+ stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs =2E.TIMER: vector=3D0x31 pin1=3D2 pin2=3D-1 Using local APIC timer interrupts. calibrating APIC timer ... =2E.... CPU clock speed is 1916.0157 MHz. =2E.... host bus clock speed is 333.0244 MHz. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=3D1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12) *15, disabled= =2E ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) SCSI subsystem initialized testing the IO APIC....................... =2E................................... done. PCI: Using ACPI for IRQ routing Simple Boot Flag at 0x3a set to 0x80 Machine check exception polling timer started. devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x0 Installing knfsd (copyright (C) 1996 okir@monad.swb.de). udf: registering filesystem PCI: Via IRQ fixup for 0000:00:10.0, from 6 to 5 PCI: Via IRQ fixup for 0000:00:10.1, from 6 to 5 PCI: Via IRQ fixup for 0000:00:10.2, from 9 to 5 PCI: Via IRQ fixup for 0000:00:10.3, from 9 to 5 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) Real Time Clock Driver v1.12 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled= ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A ttyS1 at I/O 0x2f8 (irq =3D 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=3D= xx VIA8237SATA: IDE controller at PCI slot 0000:00:0f.0 VIA8237SATA: chipset revision 128 VIA8237SATA: 100% native mode on irq 20 ide2: BM-DMA at 0x7400-0x7407, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0x7408-0x740f, BIOS settings: hdg:pio, hdh:pio hde: WDC WD2000JB-00DUA3, ATA DISK drive Using anticipatory io scheduler ide2 at 0x8800-0x8807,0x8402 on irq 20 hdg: WDC WD2000JB-00FUA0, ATA DISK drive ide3 at 0x8000-0x8007,0x7802 on irq 20 VP_IDE: IDE controller at PCI slot 0000:00:0f.1 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1 ide0: BM-DMA at 0x6800-0x6807, BIOS settings: hda:DMA, hdb:pio hda: WDC WD400EB-00CPF0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hde: max request size: 1024KiB hde: 390625000 sectors (200000 MB) w/8192KiB Cache, CHS=3D24315/255/63 /dev/ide/host2/bus0/target0/lun0: p1 hdg: max request size: 1024KiB hdg: Host Protected Area detected. current capacity is 390719855 sectors (200048 MB) native capacity is 390721968 sectors (200049 MB) hdg: 390719855 sectors (200048 MB) w/8192KiB Cache, CHS=3D24321/255/63 /dev/ide/host2/bus1/target0/lun0: p1 hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 78159151 sectors (40017 MB) native capacity is 78165360 sectors (40020 MB) hda: 78159151 sectors (40017 MB) w/2048KiB Cache, CHS=3D65535/16/63, UDMA= (100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 ata1: SATA max UDMA/133 cmd 0xE080A200 ctl 0xE080A238 bmdma 0x0 irq 19 ata2: SATA max UDMA/133 cmd 0xE080A280 ctl 0xE080A2B8 bmdma 0x0 irq 19 ata3: SATA max UDMA/133 cmd 0xE080A300 ctl 0xE080A338 bmdma 0x0 irq 19 ata4: SATA max UDMA/133 cmd 0xE080A380 ctl 0xE080A3B8 bmdma 0x0 irq 19 ata1: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_promise ata2: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_promise ata3: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata3: dev 0 configured for UDMA/133 scsi2 : sata_promise ata4: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata4: dev 0 configured for UDMA/133 scsi3 : sata_promise Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 ata5: SATA max UDMA/133 cmd 0xE080C200 ctl 0xE080C238 bmdma 0x0 irq 17 ata6: SATA max UDMA/133 cmd 0xE080C280 ctl 0xE080C2B8 bmdma 0x0 irq 17 ata7: SATA max UDMA/133 cmd 0xE080C300 ctl 0xE080C338 bmdma 0x0 irq 17 ata8: SATA max UDMA/133 cmd 0xE080C380 ctl 0xE080C3B8 bmdma 0x0 irq 17 ata5: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata5: dev 0 configured for UDMA/133 scsi4 : sata_promise ata6: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata6: dev 0 configured for UDMA/133 scsi5 : sata_promise ata7: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata7: dev 0 configured for UDMA/133 scsi6 : sata_promise ata8: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata8: dev 0 configured for UDMA/133 scsi7 : sata_promise Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 ata9: SATA max UDMA/133 cmd 0xE080E200 ctl 0xE080E238 bmdma 0x0 irq 18 ata10: SATA max UDMA/133 cmd 0xE080E280 ctl 0xE080E2B8 bmdma 0x0 irq 18 ata11: SATA max UDMA/133 cmd 0xE080E300 ctl 0xE080E338 bmdma 0x0 irq 18 ata12: SATA max UDMA/133 cmd 0xE080E380 ctl 0xE080E3B8 bmdma 0x0 irq 18 ata9: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata9: dev 0 configured for UDMA/133 scsi8 : sata_promise ata10: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48 ata10: dev 0 configured for UDMA/133 scsi9 : sata_promise ata11: no device found (phy stat 00000000) scsi10 : sata_promise ata12: no device found (phy stat 00000000) scsi11 : sata_promise Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 7Y250M0 Rev: 1.02 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sda: drive cache: write through /dev/scsi/host0/bus0/target0/lun0: p1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sdb: drive cache: write through /dev/scsi/host1/bus0/target0/lun0: p1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sdc: drive cache: write through /dev/scsi/host2/bus0/target0/lun0: p1 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 SCSI device sdd: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sdd: drive cache: write through /dev/scsi/host3/bus0/target0/lun0: p1 Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0 SCSI device sde: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sde: drive cache: write through /dev/scsi/host4/bus0/target0/lun0: p1 Attached scsi disk sde at scsi4, channel 0, id 0, lun 0 SCSI device sdf: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sdf: drive cache: write through /dev/scsi/host5/bus0/target0/lun0: p1 Attached scsi disk sdf at scsi5, channel 0, id 0, lun 0 SCSI device sdg: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sdg: drive cache: write through /dev/scsi/host6/bus0/target0/lun0: p1 Attached scsi disk sdg at scsi6, channel 0, id 0, lun 0 SCSI device sdh: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sdh: drive cache: write through /dev/scsi/host7/bus0/target0/lun0: p1 Attached scsi disk sdh at scsi7, channel 0, id 0, lun 0 SCSI device sdi: 490234752 512-byte hdwr sectors (251000 MB) SCSI device sdi: drive cache: write through /dev/scsi/host8/bus0/target0/lun0: --=_wasp.net.au-22852-1084811684-0001-2--