LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 0/2] powerpc: Wii IRQ fixes
@ 2018-05-10 21:59 Jonathan Neuschäfer
  2018-05-10 21:59 ` [PATCH 1/2] powerpc: flipper-pic: Don't match all IRQ domains Jonathan Neuschäfer
  2018-05-10 21:59 ` [PATCH 2/2] powerpc: hlwd-pic: Prevent interrupts from being handled by Starlet Jonathan Neuschäfer
  0 siblings, 2 replies; 4+ messages in thread
From: Jonathan Neuschäfer @ 2018-05-10 21:59 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: linux-kernel, Segher Boessenkool, Joel Stanley,
	Benjamin Herrenschmidt, Paul Mackerras, Michael Ellerman,
	Mathieu Malaterre, Jonathan Neuschäfer

This series makes it possible to use the SD card on the Wii. The WLAN
now also works on the SDIO level, but fails to connect to a network for
some reason.

Patch 1 seems quite obvious, although I don't know why the code was
broken in this particular way.

Patch 2 might not be the right solution for the problem at hand, but it
works and should only cause problems when both processors in the system
(PPC and ARM) try to use the same interrupt, if at all.

Jonathan Neuschäfer (2):
  powerpc: flipper-pic: Don't match all IRQ domains
  powerpc: hlwd-pic: Prevent interrupts from being handled by Starlet

 arch/powerpc/platforms/embedded6xx/flipper-pic.c | 8 --------
 arch/powerpc/platforms/embedded6xx/hlwd-pic.c    | 5 +++++
 2 files changed, 5 insertions(+), 8 deletions(-)

-- 
2.17.0

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2018-05-21 10:03 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-10 21:59 [PATCH 0/2] powerpc: Wii IRQ fixes Jonathan Neuschäfer
2018-05-10 21:59 ` [PATCH 1/2] powerpc: flipper-pic: Don't match all IRQ domains Jonathan Neuschäfer
2018-05-21 10:01   ` [1/2] " Michael Ellerman
2018-05-10 21:59 ` [PATCH 2/2] powerpc: hlwd-pic: Prevent interrupts from being handled by Starlet Jonathan Neuschäfer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).