LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
To: John Stultz <john.stultz@linaro.org>,
	Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Cc: lkml <linux-kernel@vger.kernel.org>,
	John Youn <John.Youn@synopsys.com>,
	Vardan Mikayelyan <mvardan@synopsys.com>,
	Artur Petrosyan <Arthur.Petrosyan@synopsys.com>,
	Grigor Tovmasyan <Grigor.Tovmasyan@synopsys.com>,
	Felipe Balbi <felipe.balbi@linux.intel.com>,
	"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>
Subject: Re: [PATCH] usb: dwc2: Fix HiKey regression caused by power_down feature
Date: Tue, 22 May 2018 14:24:47 +0000	[thread overview]
Message-ID: <410670D7E743164D87FA6160E7907A560131356C4E@am04wembxa.internal.synopsys.com> (raw)
In-Reply-To: <CALAqxLVZXs97sryfPaGY5Gq50-FZROgaBADNXXadcyiNhP3EPQ@mail.gmail.com>

Hi John,

Please provide log with debug enabled configuration.

On 5/21/2018 11:41 PM, John Stultz wrote:
> On Mon, May 21, 2018 at 1:45 AM, Minas Harutyunyan
> <Minas.Harutyunyan@synopsys.com> wrote:
>> Hi John,
>>
>> On 5/19/2018 4:49 AM, John Stultz wrote:
>>> In 4.17-rc, commit 03ea6d6e9e1f ("usb: dwc2: Enable power down")
>>> caused the HiKey board to not correctly handle switching between
>>> usb-gadget and usb-host mode.
>>>
>>> Unplugging the OTG port would result in:
OTG port you mean MicroAB, Correct?
dwc2 driver loaded when some device connected to OTG port?
And below message printed after disconnect the device from OTG port?

>>> [   42.240973] dwc2 f72c0000.usb: dwc2_restore_host_registers: no host registers to restore
>>> [   42.249066] dwc2 f72c0000.usb: dwc2_host_exit_hibernation: failed to restore host registers
>>>
>>> And the USB-host ports would not function.
USB-host ports - you mean 2 USB A-ports, connected to TS3USB221 HUB?
Switching ports between OTG and Host ports via TS3USB221 Switch 
performing automatically or by some SW tool?

>>>
>>> And plugging in the OTG port, we would see:
>>> [   46.046557] WARNING: CPU: 3 PID: 6 at drivers/usb/dwc2/gadget.c:260 dwc2_hsotg_init_fifo+0x194/0x1a0
>>> [   46.055761] CPU: 3 PID: 6 Comm: kworker/u16:0 Not tainted 4.17.0-rc5-00030-ge67da8c #231
>>> [   46.055767] Hardware name: HiKey Development Board (DT)
>>> [   46.055784] Workqueue: dwc2 dwc2_conn_id_status_change
>>> ...
>>>
>> Could you please send full log to debug.
> 
> Full dmesg log attached.
> 
> I unplugged the usb-otg port at 136
> and replugged it back in at 141
> 
> 
>>>        p->uframe_sched = false;
>>>        p->change_speed_quirk = true;
>>> +     p->power_down = false;
>>
>> power_down declared as int, suggested to update as follow:
>>          p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
>>
>> This can be accepted as temporary solution until we will fully debug
>> hibernation feature for HiKey platform.
> 
> Ok, will re-send with the suggested change above.
> 
> thanks
> -john
> 


  reply	other threads:[~2018-05-22 14:24 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-19  0:49 John Stultz
2018-05-21  8:45 ` Minas Harutyunyan
2018-05-21 19:40   ` John Stultz
2018-05-22 14:24     ` Minas Harutyunyan [this message]
2018-05-22 21:57       ` John Stultz
2018-09-20 14:17         ` Artur Petrosyan
2018-09-21  1:05           ` John Stultz
2018-09-24  5:57             ` Artur Petrosyan
2018-09-24 18:51               ` John Stultz
2018-09-25 10:04                 ` Artur Petrosyan
2018-09-25 17:59                   ` John Stultz
2018-09-26  6:02                     ` Artur Petrosyan
     [not found]                       ` <CALAqxLWOBFO_CjfBFNwbC+qNjtK=TgYrPusb4r5-dThBD5bVnw@mail.gmail.com>
2018-10-01  6:56                         ` Artur Petrosyan
2018-09-27 12:33                     ` Artur Petrosyan
2018-09-28 18:32                       ` John Stultz
2018-10-01  7:06                         ` Artur Petrosyan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=410670D7E743164D87FA6160E7907A560131356C4E@am04wembxa.internal.synopsys.com \
    --to=minas.harutyunyan@synopsys.com \
    --cc=Arthur.Petrosyan@synopsys.com \
    --cc=Grigor.Tovmasyan@synopsys.com \
    --cc=John.Youn@synopsys.com \
    --cc=felipe.balbi@linux.intel.com \
    --cc=john.stultz@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mvardan@synopsys.com \
    --subject='Re: [PATCH] usb: dwc2: Fix HiKey regression caused by power_down feature' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).