LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jacek Anaszewski <jacek.anaszewski@gmail.com>
To: Dan Murphy <dmurphy@ti.com>,
	robh+dt@kernel.org, mark.rutland@arm.com, pavel@ucw.cz,
	afd@ti.com
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-leds@vger.kernel.org
Subject: Re: [PATCH v5 2/2] leds: lm3601x: Introduce the lm3601x LED driver
Date: Thu, 10 May 2018 22:48:14 +0200	[thread overview]
Message-ID: <41267191-1308-6b9b-78fa-2893a525b49a@gmail.com> (raw)
In-Reply-To: <20180510174717.26540-2-dmurphy@ti.com>

Hi Dan,

Thank you for the patch.

On 05/10/2018 07:47 PM, Dan Murphy wrote:
> Introduce the family of LED devices that can
> drive a torch, strobe or IR LED.
> 
> The LED driver can be configured with a strobe
> timer to execute a strobe flash.  The IR LED
> brightness is controlled via the torch brightness
> register.
> 
> The data sheet for each the LM36010 and LM36011
> LED drivers can be found here:
> http://www.ti.com/product/LM36010
> http://www.ti.com/product/LM36011
> 
> Signed-off-by: Dan Murphy <dmurphy@ti.com>
> ---
> 
> v5 - Fixed magic numbers, change reg cache type, added of_put_node to release
> the dt node ref, and I did not change the remove function to leave the LED in its
> state on driver removal - https://patchwork.kernel.org/patch/10391741/
> 
> v4 - Fixed Cocci issue using ARRAY_SIZE - https://patchwork.kernel.org/patch/10389259/
> v3 - removed wildcard dt compatible, fixed copyright, fixed struct doc, removed
> RO registers from default, added regmap volatile for FLAGS_REG, updated regmap cache type,
> fixed unlock and extra semi colon in strobe_set, removed unnecessary out label
> in led register and fixed checking of the ret in brightness_set - https://patchwork.kernel.org/patch/10386243/
> v2 - Fixed kbuild issue and removed unused cdev_strobe - https://patchwork.kernel.org/patch/10384585/
> 
> 
>   drivers/leds/Kconfig        |   9 +
>   drivers/leds/Makefile       |   1 +
>   drivers/leds/leds-lm3601x.c | 622 ++++++++++++++++++++++++++++++++++++
>   3 files changed, 632 insertions(+)
>   create mode 100644 drivers/leds/leds-lm3601x.c
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 2c896c0e69e1..50ae536f343f 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -145,6 +145,15 @@ config LEDS_LM3692X
>   	  This option enables support for the TI LM3692x family
>   	  of white LED string drivers used for backlighting.
>   
> +config LEDS_LM3601X
> +	tristate "LED support for LM3601x Chips"
> +	depends on LEDS_CLASS && I2C && OF
> +	depends on LEDS_CLASS_FLASH
> +	select REGMAP_I2C
> +	help
> +	  This option enables support for the TI LM3601x family
> +	  of flash, torch and indicator classes.
> +
>   config LEDS_LOCOMO
>   	tristate "LED Support for Locomo device"
>   	depends on LEDS_CLASS
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 91eca81cae82..b79807fe1b67 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -76,6 +76,7 @@ obj-$(CONFIG_LEDS_MLXREG)		+= leds-mlxreg.o
>   obj-$(CONFIG_LEDS_NIC78BX)		+= leds-nic78bx.o
>   obj-$(CONFIG_LEDS_MT6323)		+= leds-mt6323.o
>   obj-$(CONFIG_LEDS_LM3692X)		+= leds-lm3692x.o
> +obj-$(CONFIG_LEDS_LM3601X)		+= leds-lm3601x.o
>   
>   # LED SPI Drivers
>   obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
> diff --git a/drivers/leds/leds-lm3601x.c b/drivers/leds/leds-lm3601x.c
> new file mode 100644
> index 000000000000..3c00886fbc7a
> --- /dev/null
> +++ b/drivers/leds/leds-lm3601x.c
> @@ -0,0 +1,622 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Flash and torch driver for Texas Instruments LM3601X LED
> + * Flash driver chip family
> + * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
> + */

Please use uniform "//" comment style here.

> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/leds.h>
> +#include <linux/led-class-flash.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <uapi/linux/uleds.h>
> +
> +#define LM3601X_LED_TORCH	0x0
> +#define LM3601X_LED_STROBE	0x1
> +#define LM3601X_LED_IR		0x2
> +
> +/* Registers */
> +#define LM3601X_ENABLE_REG	0x01
> +#define LM3601X_CFG_REG		0x02
> +#define LM3601X_LED_FLASH_REG	0x03
> +#define LM3601X_LED_TORCH_REG	0x04
> +#define LM3601X_FLAGS_REG	0x05
> +#define LM3601X_DEV_ID_REG	0x06
> +
> +#define LM3601X_SW_RESET	BIT(7)
> +
> +/* Enable Mode bits */
> +#define LM3601X_MODE_STANDBY	0x00
> +#define LM3601X_MODE_IR_DRV	BIT(0)
> +#define LM3601X_MODE_TORCH	BIT(1)
> +#define LM3601X_MODE_STROBE	(BIT(0) | BIT(1))
> +#define LM3601X_STRB_EN		BIT(2)
> +#define LM3601X_STRB_LVL_TRIG	~BIT(3)
> +#define LM3601X_STRB_EDGE_TRIG	BIT(3)
> +#define LM3601X_IVFM_EN		BIT(4)
> +
> +#define LM36010_BOOST_LIMIT_19	~BIT(5)
> +#define LM36010_BOOST_LIMIT_28	BIT(5)
> +#define LM36010_BOOST_FREQ_2MHZ	~BIT(6)
> +#define LM36010_BOOST_FREQ_4MHZ	BIT(6)
> +#define LM36010_BOOST_MODE_NORM	~BIT(7)
> +#define LM36010_BOOST_MODE_PASS	BIT(7)
> +
> +/* Flag Mask */
> +#define LM3601X_FLASH_TIME_OUT	BIT(0)
> +#define LM3601X_UVLO_FAULT	BIT(1)
> +#define LM3601X_THERM_SHUTDOWN	BIT(2)
> +#define LM3601X_THERM_CURR	BIT(3)
> +#define LM36010_CURR_LIMIT	BIT(4)
> +#define LM3601X_SHORT_FAULT	BIT(5)
> +#define LM3601X_IVFM_TRIP	BIT(6)
> +#define LM36010_OVP_FAULT	BIT(7)
> +
> +#define LM3601X_MIN_TORCH_I_UA	2400
> +#define LM3601X_MIN_STROBE_I_MA	11
> +
> +#define LM3601X_TIMEOUT_MASK	0x1e
> +#define LM3601X_ENABLE_MASK	0x03
> +
> +enum lm3601x_type {
> +	CHIP_LM36010 = 0,
> +	CHIP_LM36011,
> +};
> +
> +/**
> + * struct lm3601x_max_timeouts -
> + * @timeout: timeout value in ms
> + * @regval: the value of the register to write
> + */
> +struct lm3601x_max_timeouts {
> +	int timeout;
> +	int reg_val;
> +};
> +
> +/**
> + * struct lm3601x_led -
> + * @lock: Lock for reading/writing the device
> + * @regmap: Devices register map
> + * @client: Pointer to the I2C client
> + * @cdev_torch: led class device pointer for the torch
> + * @cdev_ir: led class device pointer for infrared
> + * @fled_cdev: flash led class device pointer
> + * @strobe_node: DT device node for the strobe
> + * @torch: LED label for the torch
> + * @strobe: LED label for the strobe
> + * @ir: LED label for the infrared
> + * @last_flag: last known flags register value
> + * @strobe_timeout: the timeout for the strobe
> + * @torch_current_max: maximum current for the torch
> + * @strobe_current_max: maximum current for the strobe
> + * @max_strobe_timeout: maximum timeout for the strobe
> + */
> +struct lm3601x_led {
> +	struct mutex lock;
> +	struct regmap *regmap;
> +	struct i2c_client *client;
> +
> +	struct led_classdev cdev_torch;
> +	struct led_classdev cdev_ir;
> +
> +	struct led_classdev_flash fled_cdev;
> +
> +	struct device_node *strobe_node;
> +	struct device_node *torch_node;
> +	struct device_node *ir_node;
> +
> +	char torch[LED_MAX_NAME_SIZE];
> +	char strobe[LED_MAX_NAME_SIZE];
> +	char ir[LED_MAX_NAME_SIZE];
> +
> +	unsigned int last_flag;
> +	unsigned int strobe_timeout;
> +
> +	u32 torch_current_max;
> +	u32 strobe_current_max;
> +	u32 max_strobe_timeout;
> +};
> +
> +static const struct lm3601x_max_timeouts strobe_timeouts[] = {
> +	{ 40, 0x00 },
> +	{ 80, 0x01 },
> +	{ 120, 0x02 },
> +	{ 160, 0x03 },
> +	{ 200, 0x04 },
> +	{ 240, 0x05 },
> +	{ 280, 0x06 },
> +	{ 320, 0x07 },
> +	{ 360, 0x08 },
> +	{ 400, 0x09 },
> +	{ 600, 0x0a },
> +	{ 800, 0x0b },
> +	{ 1000, 0x0c },
> +	{ 1200, 0x0d },
> +	{ 1400, 0x0e },
> +	{ 1600, 0x0f },
> +};
> +
> +static const struct reg_default lm3601x_regmap_defs[] = {
> +	{ LM3601X_ENABLE_REG, 0x20 },
> +	{ LM3601X_CFG_REG, 0x15 },
> +	{ LM3601X_LED_FLASH_REG, 0x00 },
> +	{ LM3601X_LED_TORCH_REG, 0x00 },
> +};
> +
> +static bool lm3601x_volatile_reg(struct device *dev, unsigned int reg)
> +{
> +	switch (reg) {
> +	case LM3601X_FLAGS_REG:
> +		return true;
> +	default:
> +		return false;
> +	}
> +}
> +
> +static const struct regmap_config lm3601x_regmap = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +
> +	.max_register = LM3601X_DEV_ID_REG,
> +	.reg_defaults = lm3601x_regmap_defs,
> +	.num_reg_defaults = ARRAY_SIZE(lm3601x_regmap_defs),
> +	.cache_type = REGCACHE_RBTREE,
> +	.volatile_reg = lm3601x_volatile_reg,
> +};
> +
> +static struct lm3601x_led *fled_cdev_to_led(
> +				struct led_classdev_flash *fled_cdev)
> +{
> +	return container_of(fled_cdev, struct lm3601x_led, fled_cdev);
> +}
> +
> +static int lm3601x_read_faults(struct lm3601x_led *led)
> +{
> +	int flags_val;
> +	int ret;
> +
> +	ret = regmap_read(led->regmap, LM3601X_FLAGS_REG, &flags_val);
> +	if (ret < 0)
> +		return -EIO;
> +
> +	led->last_flag = flags_val;
> +
> +	return led->last_flag;
> +}
> +
> +static int lm3601x_torch_brightness_set(struct led_classdev *cdev,
> +					enum led_brightness brightness)
> +{
> +	struct lm3601x_led *led =
> +	    container_of(cdev, struct lm3601x_led, cdev_torch);
> +	int ret;
> +	u8 brightness_val;
> +
> +	mutex_lock(&led->lock);
> +
> +	ret = lm3601x_read_faults(led);
> +	if (ret < 0)
> +		goto out;
> +
> +	if (brightness == LED_OFF) {
> +		ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> +					LM3601X_MODE_TORCH, LED_OFF);
> +		goto out;
> +	}
> +
> +	if (brightness == LED_ON)
> +		brightness_val = LED_ON;
> +	else
> +		brightness_val = (brightness/2);
> +
> +	ret = regmap_write(led->regmap, LM3601X_LED_TORCH_REG, brightness_val);
> +	if (ret < 0)
> +		goto out;
> +
> +	ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> +					LM3601X_MODE_TORCH,
> +					LM3601X_MODE_TORCH);
> +
> +out:
> +	mutex_unlock(&led->lock);
> +	return ret;
> +}
> +
> +static int lm3601x_strobe_set(struct led_classdev_flash *fled_cdev,
> +				bool state)
> +{
> +	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
> +	int ret;
> +	int current_timeout;
> +	int reg_count;
> +	int i;
> +	int timeout_reg_val = 0;
> +
> +	mutex_lock(&led->lock);
> +
> +	ret = regmap_read(led->regmap, LM3601X_CFG_REG, &current_timeout);
> +	if (ret < 0)
> +		goto out;
> +
> +	reg_count = ARRAY_SIZE(strobe_timeouts);
> +	for (i = 0; i < reg_count; i++) {
> +		if (led->strobe_timeout > strobe_timeouts[i].timeout)
> +			continue;
> +
> +		if (led->strobe_timeout <= strobe_timeouts[i].timeout) {
> +			timeout_reg_val = (strobe_timeouts[i].reg_val << 1);
> +			break;
> +		}
> +
> +		ret = -EINVAL;
> +		goto out;
> +	}
> +
> +	if (led->strobe_timeout != current_timeout)
> +		ret = regmap_update_bits(led->regmap, LM3601X_CFG_REG,
> +					LM3601X_TIMEOUT_MASK, timeout_reg_val);
> +
> +	if (state)
> +		ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> +					LM3601X_MODE_STROBE,
> +					LM3601X_MODE_STROBE);
> +	else
> +		ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> +					LM3601X_MODE_STROBE, LED_OFF);
> +
> +	ret = lm3601x_read_faults(led);
> +out:
> +	mutex_unlock(&led->lock);
> +	return ret;
> +}
> +
> +static int lm3601x_strobe_brightness_set(struct led_classdev *cdev,
> +					 enum led_brightness brightness)
> +{
> +	struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(cdev);
> +	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
> +	int ret;
> +	u8 brightness_val;
> +
> +	mutex_lock(&led->lock);
> +	ret = lm3601x_read_faults(led);
> +	if (ret < 0)
> +		goto out;
> +
> +	if (brightness == LED_OFF) {
> +		ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> +					LM3601X_MODE_STROBE, LED_OFF);
> +		goto out;
> +	}
> +
> +	if (brightness == LED_ON)
> +		brightness_val = LED_ON;
> +	else
> +		brightness_val = (brightness/2);
> +
> +	ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
> +
> +out:
> +	mutex_unlock(&led->lock);
> +	return ret;
> +}
> +
> +static int lm3601x_strobe_timeout_set(struct led_classdev_flash *fled_cdev,
> +				u32 timeout)
> +{
> +	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
> +	int ret = 0;
> +
> +	mutex_lock(&led->lock);
> +
> +	if (timeout > led->max_strobe_timeout)
> +		ret = -EINVAL;

LED flash core takes care of clamping timeout setting
according to the defined constraints.

> +	else
> +		led->strobe_timeout = timeout;
> +
> +	mutex_unlock(&led->lock);
> +
> +	return ret;
> +}
> +
> +static int lm3601x_strobe_get(struct led_classdev_flash *fled_cdev,
> +				bool *state)
> +{
> +	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
> +	int ret;
> +	int strobe_state;
> +
> +	mutex_lock(&led->lock);
> +
> +	ret = regmap_read(led->regmap, LM3601X_ENABLE_REG, &strobe_state);
> +	if (ret < 0)
> +		goto out;
> +
> +	*state = strobe_state & LM3601X_MODE_STROBE;
> +
> +out:
> +	mutex_unlock(&led->lock);
> +	return ret;
> +}
> +
> +static int lm3601x_ir_brightness_set(struct led_classdev *cdev,
> +					 enum led_brightness brightness)
> +{
> +	struct lm3601x_led *led =
> +	    container_of(cdev, struct lm3601x_led, cdev_ir);
> +	int ret;
> +	u8 brightness_val;
> +
> +	mutex_lock(&led->lock);
> +	ret = lm3601x_read_faults(led);
> +	if (ret < 0)
> +		goto out;
> +
> +	if (brightness == LED_OFF) {
> +		ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> +					LM3601X_LED_IR,
> +					LED_OFF);
> +		goto out;
> +	}
> +
> +	if (brightness == LED_ON)
> +		brightness_val = LED_ON;
> +	else
> +		brightness_val = (brightness/2);
> +
> +	ret = regmap_write(led->regmap, LM3601X_LED_FLASH_REG, brightness_val);
> +	if (ret < 0)
> +		goto out;
> +
> +	ret = regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> +					LM3601X_MODE_IR_DRV,
> +					LM3601X_MODE_IR_DRV);
> +
> +out:
> +	mutex_unlock(&led->lock);
> +	return ret;
> +}
> +
> +static int lm3601x_strobe_fault_get(struct led_classdev_flash *fled_cdev,
> +				u32 *fault)

Does the device report only strobe related faults?

> +{
> +	struct lm3601x_led *led = fled_cdev_to_led(fled_cdev);
> +
> +	lm3601x_read_faults(led);
> +
> +	*fault = led->last_flag;

You should translate device specific faults to LED_FAULT* flags.
Please compare e.g. drivers/leds/leds-max77693.c or
driver/leds/leds-as3645a.c.

> +
> +	return 0;
> +}
> +
> +static const struct led_flash_ops strobe_ops = {
> +	.strobe_set		= lm3601x_strobe_set,
> +	.strobe_get		= lm3601x_strobe_get,
> +	.timeout_set		= lm3601x_strobe_timeout_set,
> +	.fault_get		= lm3601x_strobe_fault_get,
> +};
> +
> +static int lm3601x_register_leds(struct lm3601x_led *led)
> +{
> +	struct led_classdev_flash *fled_cdev;
> +	struct led_classdev *led_cdev;
> +	int err = -ENODEV;
> +
> +	if (led->torch_node) {
> +		led->cdev_torch.name = led->torch;
> +		led->cdev_torch.max_brightness = LED_FULL;
> +		led->cdev_torch.brightness_set_blocking = lm3601x_torch_brightness_set;
> +		err = devm_led_classdev_register(&led->client->dev,
> +				&led->cdev_torch);
> +		if (err < 0)
> +			return err;
> +	}
> +
> +	if (led->strobe_node) {
> +		fled_cdev = &led->fled_cdev;
> +		fled_cdev->ops = &strobe_ops;
> +
> +		led_cdev = &fled_cdev->led_cdev;
> +		led_cdev->name = led->strobe;
> +		led_cdev->max_brightness = LED_FULL;
> +		led_cdev->brightness_set_blocking = lm3601x_strobe_brightness_set;
> +		led_cdev->flags |= LED_DEV_CAP_FLASH;
> +
> +		err = led_classdev_flash_register(&led->client->dev,
> +				fled_cdev);
> +		if (err < 0)
> +			return err;
> +	}
> +
> +	if (led->ir_node) {
> +		led->cdev_ir.name = led->ir;
> +		led->cdev_ir.max_brightness = LED_FULL;
> +		led->cdev_ir.brightness_set_blocking =
> +						lm3601x_ir_brightness_set;
> +
> +		err = devm_led_classdev_register(&led->client->dev,
> +				&led->cdev_ir);
> +	}
> +
> +	return err;
> +}
> +
> +static void lm3601x_init_flash_timeout(struct lm3601x_led *led)
> +{
> +	struct led_flash_setting *setting;
> +
> +	setting = &led->fled_cdev.timeout;
> +	setting->min = strobe_timeouts[0].timeout;
> +	setting->max = led->max_strobe_timeout;
> +	setting->step = 40;
> +	setting->val = led->max_strobe_timeout;
> +}
> +
> +static int lm3601x_parse_node(struct lm3601x_led *led,
> +			      struct device_node *node)
> +{
> +	struct device_node *child_node;
> +	const char *name;
> +	int ret = -ENODEV;
> +
> +	for_each_available_child_of_node(node, child_node) {
> +		u32 id = 0;
> +
> +		of_property_read_u32(child_node, "reg", &id);
> +
> +		switch (id) {
> +		case LM3601X_LED_TORCH:
> +			led->torch_node = of_node_get(child_node);
> +			break;
> +		case LM3601X_LED_STROBE:
> +			led->strobe_node = of_node_get(child_node);
> +			break;
> +		case LM3601X_LED_IR:
> +			led->ir_node = of_node_get(child_node);
> +			break;
> +		default:
> +			dev_warn(&led->client->dev,
> +				 "unknown LED %u encountered, ignoring\n", id);
> +			break;
> +		}
> +	}
> +
> +	if (led->torch_node) {
> +		ret = of_property_read_string(led->torch_node, "label", &name);
> +		if (!ret)
> +			snprintf(led->torch, sizeof(led->torch),
> +				"%s:%s", led->torch_node->name, name);
> +		else
> +			snprintf(led->torch, sizeof(led->torch),
> +				"%s:torch", led->torch_node->name);
> +		ret = of_property_read_u32(led->torch_node, "led-max-microamp",
> +					&led->torch_current_max);
> +		if (ret < 0) {
> +			led->torch_current_max = LM3601X_MIN_TORCH_I_UA;
> +			dev_warn(&led->client->dev,
> +				"led-max-microamp DT property missing\n");
> +		}
> +
> +		of_node_put(led->torch_node);
> +	}
> +
> +	if (led->strobe_node) {
> +		ret = of_property_read_string(led->strobe_node, "label", &name);
> +		if (!ret)
> +			snprintf(led->strobe, sizeof(led->strobe),
> +				"%s:%s", led->strobe_node->name, name);
> +		else
> +			snprintf(led->strobe, sizeof(led->strobe),
> +				"%s::strobe", led->strobe_node->name);
> +
> +		ret = of_property_read_u32(led->strobe_node,
> +					"flash-max-microamp",
> +					&led->strobe_current_max);
> +		if (ret < 0) {
> +			led->strobe_current_max = LM3601X_MIN_STROBE_I_MA;
> +			dev_warn(&led->client->dev,
> +				 "flash-max-microamp DT property missing\n");
> +		}
> +
> +		ret = of_property_read_u32(led->strobe_node,
> +					"flash-max-timeout-us",
> +					&led->max_strobe_timeout);
> +		if (ret < 0) {
> +			led->max_strobe_timeout = strobe_timeouts[0].reg_val;
> +			dev_warn(&led->client->dev,
> +				 "flash-max-timeout-us DT property missing\n");
> +		}

Common LED bindings state that flash-max-microamp and
flash-max-timeout-us properties are mandatory.

> +
> +		lm3601x_init_flash_timeout(led);
> +
> +		of_node_put(led->strobe_node);
> +	}
> +
> +	if (led->ir_node) {
> +		ret = of_property_read_string(led->ir_node, "label", &name);
> +		if (!ret)
> +			snprintf(led->ir, sizeof(led->ir),
> +				"%s:%s", led->ir_node->name, name);
> +		else
> +			snprintf(led->ir, sizeof(led->ir),
> +				"%s::infrared", led->ir_node->name);
> +
> +		of_node_put(led->ir_node);
> +	}
> +
> +	return ret;
> +}
> +
> +static int lm3601x_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct lm3601x_led *led;
> +	int err;
> +
> +	led = devm_kzalloc(&client->dev,
> +			    sizeof(struct lm3601x_led), GFP_KERNEL);
> +	if (!led)
> +		return -ENOMEM;
> +
> +	err = lm3601x_parse_node(led, client->dev.of_node);
> +	if (err < 0)
> +		return -ENODEV;
> +
> +	led->client = client;
> +	led->regmap = devm_regmap_init_i2c(client, &lm3601x_regmap);
> +	if (IS_ERR(led->regmap)) {
> +		err = PTR_ERR(led->regmap);
> +		dev_err(&client->dev,
> +			"Failed to allocate register map: %d\n", err);
> +		return err;
> +	}
> +
> +	mutex_init(&led->lock);
> +	i2c_set_clientdata(client, led);
> +	err = lm3601x_register_leds(led);
> +
> +	return err;
> +}
> +
> +static int lm3601x_remove(struct i2c_client *client)
> +{
> +	struct lm3601x_led *led = i2c_get_clientdata(client);
> +
> +	regmap_update_bits(led->regmap, LM3601X_ENABLE_REG,
> +			   LM3601X_ENABLE_MASK,
> +			   LM3601X_MODE_STANDBY);
> +
> +	return 0;
> +}
> +
> +static const struct i2c_device_id lm3601x_id[] = {
> +	{ "LM36010", CHIP_LM36010 },
> +	{ "LM36011", CHIP_LM36011 },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(i2c, lm3601x_id);
> +
> +static const struct of_device_id of_lm3601x_leds_match[] = {
> +	{ .compatible = "ti,lm36010", },
> +	{ .compatible = "ti,lm36011", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, of_lm3601x_leds_match);
> +
> +static struct i2c_driver lm3601x_i2c_driver = {
> +	.driver = {
> +		.name = "lm3601x",
> +		.of_match_table = of_lm3601x_leds_match,
> +	},
> +	.probe = lm3601x_probe,
> +	.remove = lm3601x_remove,
> +	.id_table = lm3601x_id,
> +};
> +module_i2c_driver(lm3601x_i2c_driver);
> +
> +MODULE_DESCRIPTION("Texas Instruments Flash Lighting driver for LM3601X");
> +MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
> +MODULE_LICENSE("GPL v2");
> 

-- 
Best regards,
Jacek Anaszewski

  reply	other threads:[~2018-05-10 20:49 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-10 17:47 [PATCH v5 1/2] dt: bindings: lm3601x: Introduce the lm3601x driver Dan Murphy
2018-05-10 17:47 ` [PATCH v5 2/2] leds: lm3601x: Introduce the lm3601x LED driver Dan Murphy
2018-05-10 20:48   ` Jacek Anaszewski [this message]
2018-05-11 11:56     ` Dan Murphy
2018-05-11 20:26       ` Jacek Anaszewski
2018-05-14 19:40       ` Dan Murphy
2018-05-14 19:49         ` Andy Shevchenko
2018-05-14 20:05         ` Pavel Machek
2018-05-14 20:13           ` Dan Murphy
2018-05-14 20:16             ` Pavel Machek
2018-05-14 20:31               ` Dan Murphy
2018-05-14 20:05         ` Jacek Anaszewski
2018-05-14 20:09           ` Dan Murphy
2018-05-10 18:54 ` [PATCH v5 1/2] dt: bindings: lm3601x: Introduce the lm3601x driver Pavel Machek
2018-05-10 19:06   ` Dan Murphy
2018-05-10 19:10     ` Dan Murphy
2018-05-10 20:17       ` Jacek Anaszewski
2018-05-11 12:12         ` Dan Murphy
2018-05-11 20:27           ` Jacek Anaszewski
2018-05-14 20:07             ` Dan Murphy
2018-05-14 20:48               ` Jacek Anaszewski
2018-05-10 20:50 ` Jacek Anaszewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=41267191-1308-6b9b-78fa-2893a525b49a@gmail.com \
    --to=jacek.anaszewski@gmail.com \
    --cc=afd@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pavel@ucw.cz \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH v5 2/2] leds: lm3601x: Introduce the lm3601x LED driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).