LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Heiko Stübner" <heiko@sntech.de>
To: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Johan Jonker <jbx6244@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: rockchip: rk356x: Add HDMI audio nodes
Date: Thu, 25 Nov 2021 20:30:24 +0100	[thread overview]
Message-ID: <4335378.eiKhv840gI@diego> (raw)
In-Reply-To: <08774d87-97e0-6afa-2816-bf78949e4e68@gmail.com>

Am Donnerstag, 25. November 2021, 20:07:21 CET schrieb Johan Jonker:
> Hi Nicolas,
> 
> Some comments...
> 
> On 11/25/21 11:08 AM, Nicolas Frattaroli wrote:
> > This adds the i2s0 node and an hdmi-sound sound device to the
> > rk356x device tree. On the rk356[68], the i2s0 controller is
> > connected to HDMI audio.
> > 
> > Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
> > ---
> >  arch/arm64/boot/dts/rockchip/rk356x.dtsi | 32 ++++++++++++++++++++++++
> >  1 file changed, 32 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > index 3c09cf6d4c37..ad4053402eef 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > @@ -614,6 +614,21 @@ hdmi_in_vp2: endpoint@2 {
> >  		};
> >  	};
> >  
> 
> > +	hdmi_sound: hdmi-sound {
> 
> Some DT sort rules:
> 
> For nodes:
> Sort things without reg alphabetical first,
> then sort the rest by reg address.
> 
> > +		compatible = "simple-audio-card";
> 
> simple-audio-card,name = "HDMI";
> 
> > +		simple-audio-card,format = "i2s";
> > +		simple-audio-card,mclk-fs = <256>;
> 
> > +		simple-audio-card,name = "hdmi-sound";
> 
> Exceptions:
> Sort simple-audio-card,name above other simple-audio-card properties.
> 
> Shouldn't we standardize to SPDIF, HDMI and Analog similar to rk3318/rk3328?
> Make a shorter label without spaces or special chars, so that chars
> don't get removed?
> See "aplay -l" screen print.
> 
> Maybe rename to "HDMI"?
> 
> > +		status = "disabled";
> > +
> > +		simple-audio-card,cpu {
> > +			sound-dai = <&i2s0_8ch>;
> > +		};
> 
> Add empty line between nodes.
> 
> Not sure if Heiko cares, but when alphabetical sort I get this:
> simple-audio-card,codec
> simple-audio-card,cpu

Hehe ... I do care, but would normally just (silently) re-sort these
things when applying ;-) .


Heiko


> > +		simple-audio-card,codec {
> > +			sound-dai = <&hdmi>;
> > +		};
> > +	};
> > +
> >  	qos_gpu: qos@fe128000 {
> >  		compatible = "rockchip,rk3568-qos", "syscon";
> >  		reg = <0x0 0xfe128000 0x0 0x20>;
> > @@ -789,6 +804,23 @@ spdif: spdif@fe460000 {
> >  		status = "disabled";
> >  	};
> >  
> > +	i2s0_8ch: i2s@fe400000 {
> > +		compatible = "rockchip,rk3568-i2s-tdm";
> > +		reg = <0x0 0xfe400000 0x0 0x1000>;
> > +		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> > +		assigned-clocks = <&cru CLK_I2S0_8CH_TX_SRC>, <&cru CLK_I2S0_8CH_RX_SRC>;
> > +		assigned-clock-rates = <1188000000>, <1188000000>;
> > +		clocks = <&cru MCLK_I2S0_8CH_TX>, <&cru MCLK_I2S0_8CH_RX>, <&cru HCLK_I2S0_8CH>;
> > +		clock-names = "mclk_tx", "mclk_rx", "hclk";
> > +		dmas = <&dmac1 0>;
> > +		dma-names = "tx";
> > +		resets = <&cru SRST_M_I2S0_8CH_TX>, <&cru SRST_M_I2S0_8CH_RX>;
> > +		reset-names = "tx-m", "rx-m";
> > +		rockchip,grf = <&grf>;
> > +		#sound-dai-cells = <0>;
> > +		status = "disabled";
> > +	};
> > +
> >  	i2s1_8ch: i2s@fe410000 {
> >  		compatible = "rockchip,rk3568-i2s-tdm";
> >  		reg = <0x0 0xfe410000 0x0 0x1000>;
> > 
> 





  reply	other threads:[~2021-11-25 19:32 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-25 10:08 [PATCH 0/2] HDMI Audio on RK356x/Quartz64 Model A Nicolas Frattaroli
2021-11-25 10:08 ` [PATCH 1/2] arm64: dts: rockchip: rk356x: Add HDMI audio nodes Nicolas Frattaroli
2021-11-25 18:47   ` Michael Riesch
2021-11-25 19:07   ` Johan Jonker
2021-11-25 19:30     ` Heiko Stübner [this message]
2021-11-25 10:08 ` [PATCH 2/2] arm64: dts: rockchip: Enable HDMI audio on Quartz64 A Nicolas Frattaroli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4335378.eiKhv840gI@diego \
    --to=heiko@sntech.de \
    --cc=devicetree@vger.kernel.org \
    --cc=frattaroli.nicolas@gmail.com \
    --cc=jbx6244@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH 1/2] arm64: dts: rockchip: rk356x: Add HDMI audio nodes' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).