LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* Re: Oops on serial access on kernel 2.6.16.38
  2007-01-26 15:50 Oops on serial access on kernel 2.6.16.38 Jose Goncalves
@ 2006-12-26 20:10 ` Frederik Deweerdt
  2007-01-26 18:17   ` Jose Goncalves
  0 siblings, 1 reply; 7+ messages in thread
From: Frederik Deweerdt @ 2006-12-26 20:10 UTC (permalink / raw)
  To: Jose Goncalves; +Cc: linux-kernel

On Fri, Jan 26, 2007 at 03:50:25PM +0000, Jose Goncalves wrote:
> I'm having a problem with the latest 2.6.16 kernel (I've found the
> problem on 2.6.16.37 and 2.6.16.38). I have a application that retreives
> data from a GPS connected on a serial port. From time to time a get a
> kernel Oops, like this:
> 
Could you send your .config?

Regards,
Frederik

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Oops on serial access on kernel 2.6.16.38
@ 2007-01-26 15:50 Jose Goncalves
  2006-12-26 20:10 ` Frederik Deweerdt
  0 siblings, 1 reply; 7+ messages in thread
From: Jose Goncalves @ 2007-01-26 15:50 UTC (permalink / raw)
  To: linux-kernel

Hi,

I'm having a problem with the latest 2.6.16 kernel (I've found the
problem on 2.6.16.37 and 2.6.16.38). I have a application that retreives
data from a GPS connected on a serial port. From time to time a get a
kernel Oops, like this:

[15423.488491] Unable to handle kernel NULL pointer dereference at
virtual address 00000000
[15423.496682] printing eip:
[15423.504660] 00000000
[15423.504689] *pde = 00000000
[15423.512622] Oops: 0000 [#1]
[15423.520551] Modules linked in:
[15423.528445] CPU: 0
[15423.528461] EIP: 0060:[] Not tainted VLI
[15423.528477] EFLAGS: 00010202 (2.6.16.38-mtm4-debug #1)
[15423.553076] EIP is at rest_init+0x3feffdc0/0x1e
[15423.561877] eax: 00000060 ebx: 00000000 ecx: 00000000 edx: 000002fd
[15423.571312] esi: 00000000 edi: 00000040 ebp: 00000202 esp: c7613e4c
[15423.580941] ds: 007b es: 007b ss: 0068
[15423.590833] Process gp_position (pid: 4421, threadinfo=c7612000
task=c1240a90)
[15423.591608] Stack: c02fae70 00000005 c74304e0 c02fae70 c128d5e4
c7a69a80 c01ba49a c02fae70
[15423.613257] c128d5e4 00000000 c7a69a80 c7a69a80 c01bbaa0 c128d5e4
00000000 ffffffed
[15423.625736] c7a69a80 00000100 00400041 c01a9e67 c7627800 c7a69a80
01022e04 c7627800
[15423.638428] Call Trace:
[15423.650518] [] uart_startup+0x63/0xf4
[15423.663192] [] uart_open+0xaa/0xec
[15423.675954] [] tty_open+0x16c/0x270
[15423.688792] [] chrdev_open+0xd7/0xf0
[15423.701750] [] chrdev_open+0x0/0xf0
[15423.714647] [] __dentry_open+0xb4/0x180
[15423.727850] [] nameidata_to_filp+0x1f/0x31
[15423.741067] [] do_filp_open+0x37/0x3f
[15423.754480] [] strncpy_from_user+0x2e/0x4c
[15423.768075] [] get_unused_fd+0x4c/0x91
[15423.781757] [] do_sys_open+0x40/0xb5
[15423.795659] [] sys_open+0x13/0x17
[15423.809685] [] syscall_call+0x7/0xb
[15423.823902] Code: Bad EIP value.

Regards,
José Gonçalves


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Oops on serial access on kernel 2.6.16.38
  2006-12-26 20:10 ` Frederik Deweerdt
@ 2007-01-26 18:17   ` Jose Goncalves
  2007-01-26 21:22     ` Frederik Deweerdt
  0 siblings, 1 reply; 7+ messages in thread
From: Jose Goncalves @ 2007-01-26 18:17 UTC (permalink / raw)
  To: Frederik Deweerdt; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 430 bytes --]

Frederik Deweerdt wrote:
> On Fri, Jan 26, 2007 at 03:50:25PM +0000, Jose Goncalves wrote:
>   
>> I'm having a problem with the latest 2.6.16 kernel (I've found the
>> problem on 2.6.16.37 and 2.6.16.38). I have a application that retreives
>> data from a GPS connected on a serial port. From time to time a get a
>> kernel Oops, like this:
>>
>>     
> Could you send your .config?
>   
Here it goes...

Regards,
José Gonçalves

[-- Attachment #2: config-2.6.16.38-mtm4-debug --]
[-- Type: text/plain, Size: 30678 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.16.38
# Wed Jan 24 11:36:14 2007
#
CONFIG_X86_32=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
# CONFIG_VM86 is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Block layer
#
# CONFIG_LBD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
CONFIG_M586MMX=y
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_TSC=y
# CONFIG_HPET_TIMER is not set
# CONFIG_SMP is not set
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_MCE is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y

#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MATH_EMULATION is not set
# CONFIG_MTRR is not set
# CONFIG_REGPARM is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_DOUBLEFAULT=y

#
# Power management options (ACPI, APM)
#
# CONFIG_PM is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
# CONFIG_ACPI is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_LEGACY_PROC is not set
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=y
CONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
# CONFIG_BT_HCIUSB_SCO is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
# CONFIG_PNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
CONFIG_BLK_DEV_SIS5513=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
# CONFIG_PHYLIB is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=y
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=600
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=6
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_FOURPORT is not set
# CONFIG_SERIAL_8250_ACCENT is not set
# CONFIG_SERIAL_8250_BOCA is not set
# CONFIG_SERIAL_8250_HUB6 is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
# CONFIG_I8XX_TCO is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# ISA-based Watchdog Cards
#
# CONFIG_PCWATCHDOG is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_WDT is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia Capabilities Port drivers
#

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Bootsplash configuration
#
CONFIG_BOOTSPLASH=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ANYDATA is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp850"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
CONFIG_NLS_CODEPAGE_860=y
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_PRINTK_TIME=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_EARLY_PRINTK=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Oops on serial access on kernel 2.6.16.38
  2007-01-26 18:17   ` Jose Goncalves
@ 2007-01-26 21:22     ` Frederik Deweerdt
  2007-01-29 15:05       ` Jose Goncalves
  0 siblings, 1 reply; 7+ messages in thread
From: Frederik Deweerdt @ 2007-01-26 21:22 UTC (permalink / raw)
  To: Jose Goncalves; +Cc: linux-kernel

On Fri, Jan 26, 2007 at 06:17:03PM +0000, Jose Goncalves wrote:
> Frederik Deweerdt wrote:
> > On Fri, Jan 26, 2007 at 03:50:25PM +0000, Jose Goncalves wrote:
> >   
> >> I'm having a problem with the latest 2.6.16 kernel (I've found the
> >> problem on 2.6.16.37 and 2.6.16.38). I have a application that retreives
> >> data from a GPS connected on a serial port. From time to time a get a
> >> kernel Oops, like this:
> >>
> >>     
> > Could you send your .config?
> >   
> Here it goes...
> 
Thanks. It looks like something is wrong with port->ops->startup() in
uart_startup(), could you apply the following patch and report the
results? And btw, you're using a plain 8250 serial port, isn't it?

Regards,
Frederik


diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index cc1faa3..08772dc 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -171,6 +171,10 @@ static int uart_startup(struct uart_state *state, int init_hw)
 		uart_circ_clear(&info->xmit);
 	}
 
+	printk("type is %d\n", port->type);
+	printk("ops is %p\n", port->ops);
+	printk("ops->startup is %p\n", port->ops->startup);
+
 	retval = port->ops->startup(port);
 	if (retval == 0) {
 		if (init_hw) {

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Oops on serial access on kernel 2.6.16.38
  2007-01-26 21:22     ` Frederik Deweerdt
@ 2007-01-29 15:05       ` Jose Goncalves
  2007-01-30 12:55         ` Jose Goncalves
  0 siblings, 1 reply; 7+ messages in thread
From: Jose Goncalves @ 2007-01-29 15:05 UTC (permalink / raw)
  To: Frederik Deweerdt; +Cc: linux-kernel

Frederik Deweerdt wrote:
> On Fri, Jan 26, 2007 at 06:17:03PM +0000, Jose Goncalves wrote:
>   
>> Frederik Deweerdt wrote:
>>     
>>> On Fri, Jan 26, 2007 at 03:50:25PM +0000, Jose Goncalves wrote:
>>>   
>>>       
>>>> I'm having a problem with the latest 2.6.16 kernel (I've found the
>>>> problem on 2.6.16.37 and 2.6.16.38). I have a application that retreives
>>>> data from a GPS connected on a serial port. From time to time a get a
>>>> kernel Oops, like this:
>>>>
>>>>     
>>>>         
>>> Could you send your .config?
>>>   
>>>       
>> Here it goes...
>>
>>     
> Thanks. It looks like something is wrong with port->ops->startup() in
> uart_startup(), could you apply the following patch and report the
> results? And btw, you're using a plain 8250 serial port, isn't it?
>   

OK. I've applied the patch and I'm now waiting for the kernel Oops...
sometimes it takes two days until it happens.
I'm using a standard 16550A serial controller found on my hardware, that
is a PC/104 SBC:

 http://www.icop.com.tw/products_detail.asp?ProductID=70

We have a custom hardware that has another serial controller (TL16C554A)
with 4 extra serial ports (also, 16550A type), and the problem happens
in a test program that is retreiving data from ttyS0 (from the SBC) and
ttyS3 (from our custom hardware).
The serial ports initialization, as reported by the kernel:

[   15.216847] Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ
sharing disabled
[   15.219517] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   15.221963] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   15.223907] serial8250: ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A
[   15.225757] serial8250: ttyS3 at I/O 0x2e8 (irq = 5) is a 16550A
[   15.227644] serial8250: ttyS4 at I/O 0x1a0 (irq = 6) is a 16550A
[   15.229656] serial8250: ttyS5 at I/O 0x1a8 (irq = 6) is a 16550A

With your patch I'm now getting the following for each iteration of my
test program:

<4>[  298.918962] type is 4
<4>[  298.919011] ops is c0292f00
<4>[  298.919033] ops->startup is c01bd777
<4>[  299.436980] type is 4
<4>[  299.437030] ops is c0292f00
<4>[  299.437051] ops->startup is c01bd777

I don't know if it's relevant or not but the kernel is running in
NFS-Root mode.

Best regards,
José Gonçalves

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Oops on serial access on kernel 2.6.16.38
  2007-01-29 15:05       ` Jose Goncalves
@ 2007-01-30 12:55         ` Jose Goncalves
  2007-02-01  0:06           ` Frederik Deweerdt
  0 siblings, 1 reply; 7+ messages in thread
From: Jose Goncalves @ 2007-01-30 12:55 UTC (permalink / raw)
  To: Frederik Deweerdt; +Cc: linux-kernel

Jose Goncalves wrote:
> Frederik Deweerdt wrote:
>   
>> On Fri, Jan 26, 2007 at 06:17:03PM +0000, Jose Goncalves wrote:
>>   
>>     
>>> Frederik Deweerdt wrote:
>>>     
>>>       
>>>> On Fri, Jan 26, 2007 at 03:50:25PM +0000, Jose Goncalves wrote:
>>>>   
>>>>       
>>>>         
>>>>> I'm having a problem with the latest 2.6.16 kernel (I've found the
>>>>> problem on 2.6.16.37 and 2.6.16.38). I have a application that retreives
>>>>> data from a GPS connected on a serial port. From time to time a get a
>>>>> kernel Oops, like this:
>>>>>
>>>>>     
>>>>>         
>>>>>           
>>>> Could you send your .config?
>>>>   
>>>>       
>>>>         
>>> Here it goes...
>>>
>>>     
>>>       
>> Thanks. It looks like something is wrong with port->ops->startup() in
>> uart_startup(), could you apply the following patch and report the
>> results? And btw, you're using a plain 8250 serial port, isn't it?
>>   
>>     
>
> OK. I've applied the patch and I'm now waiting for the kernel Oops...
> sometimes it takes two days until it happens.
> I'm using a standard 16550A serial controller found on my hardware, that
> is a PC/104 SBC:
>
>  http://www.icop.com.tw/products_detail.asp?ProductID=70
>
> We have a custom hardware that has another serial controller (TL16C554A)
> with 4 extra serial ports (also, 16550A type), and the problem happens
> in a test program that is retreiving data from ttyS0 (from the SBC) and
> ttyS3 (from our custom hardware).
> The serial ports initialization, as reported by the kernel:
>
> [   15.216847] Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ
> sharing disabled
> [   15.219517] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [   15.221963] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> [   15.223907] serial8250: ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A
> [   15.225757] serial8250: ttyS3 at I/O 0x2e8 (irq = 5) is a 16550A
> [   15.227644] serial8250: ttyS4 at I/O 0x1a0 (irq = 6) is a 16550A
> [   15.229656] serial8250: ttyS5 at I/O 0x1a8 (irq = 6) is a 16550A
>
> With your patch I'm now getting the following for each iteration of my
> test program:
>
> <4>[  298.918962] type is 4
> <4>[  298.919011] ops is c0292f00
> <4>[  298.919033] ops->startup is c01bd777
> <4>[  299.436980] type is 4
> <4>[  299.437030] ops is c0292f00
> <4>[  299.437051] ops->startup is c01bd777
>
> I don't know if it's relevant or not but the kernel is running in
> NFS-Root mode.
>   
I've had a new kernel Oops with your patch applied:

<4>[35769.361941] type is 4
<4>[35769.361994] ops is c0292f00
<4>[35769.362016] ops->startup is c01bd777
<4>[35769.958983] type is 4
<4>[35769.959038] ops is c0292f00
<4>[35769.959060] ops->startup is c01bd777
<1>[35769.959201] Unable to handle kernel NULL pointer dereference at
virtual address 00000000
<1>[35769.966797]  printing eip:
<4>[35769.974265] 00000000
<1>[35769.974296] *pde = 00000000
<0>[35769.981814] Oops: 0000 [#1]
<4>[35769.989367] Modules linked in:
<0>[35769.996955] CPU:    0
<4>[35769.996974] EIP:    0060:[<00000000>]    Not tainted VLI
<4>[35769.996990] EFLAGS: 00010202   (2.6.16.38-mtm4-debug2 #1)
<0>[35770.020533] EIP is at rest_init+0x3feffdc0/0x1e
<0>[35770.029044] eax: 00000060   ebx: 00000000   ecx: 00000000   edx:
000002fd
<0>[35770.038017] esi: 00000000   edi: 00000040   ebp: 00000202   esp:
c72e9e34
<0>[35770.047118] ds: 007b   es: 007b   ss: 0068
<0>[35770.056257] Process gp_position (pid: 15013, threadinfo=c72e8000
task=c11a15a0)
<0>[35770.057042] Stack: <0>c02fae70 00000005 c02fae70 c77f6de0 c12815e4
c77714e0 c01ba4c4 c02fae70
<0>[35770.077407]        c025f18a c01bd777 c025f17f c0292f00 c025f173
00000004 c12815e4 00000000
<0>[35770.089263]        c77714e0 c77714e0 c01bbacc c12815e4 00000000
ffffffed c77714e0 00000100
<0>[35770.101473] Call Trace:
<0>[35770.113147]  [<c01ba4c4>] uart_startup+0x8d/0x120
<0>[35770.125473]  [<c01bd777>] serial8250_startup+0x0/0x2a5
<0>[35770.138071]  [<c01bbacc>] uart_open+0xaa/0xec
<0>[35770.150859]  [<c01a9e67>] tty_open+0x16c/0x270
<0>[35770.163665]  [<c013dbbb>] chrdev_open+0xd7/0xf0
<0>[35770.176636]  [<c013dae4>] chrdev_open+0x0/0xf0
<0>[35770.189587]  [<c0136449>] __dentry_open+0xb4/0x180
<0>[35770.202755]  [<c01365e8>] nameidata_to_filp+0x1f/0x31
<0>[35770.216107]  [<c013654c>] do_filp_open+0x37/0x3f
<0>[35770.229554]  [<c0137bc0>] __fput+0x11e/0x126
<0>[35770.242947]  [<c018f64f>] strncpy_from_user+0x2e/0x4c
<0>[35770.256773]  [<c013668d>] get_unused_fd+0x4c/0x91
<0>[35770.270556]  [<c013676c>] do_sys_open+0x40/0xb5
<0>[35770.284545]  [<c01367f4>] sys_open+0x13/0x17
<0>[35770.298620]  [<c01023d9>] syscall_call+0x7/0xb
<0>[35770.312965] Code:  Bad EIP value.
<4>[35770.357131]  type is 4
<4>[35775.528001] ops is c0292f00
<4>[35775.541519] ops->startup is c01bd777

Best regards,
José Gonçalves


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: Oops on serial access on kernel 2.6.16.38
  2007-01-30 12:55         ` Jose Goncalves
@ 2007-02-01  0:06           ` Frederik Deweerdt
  0 siblings, 0 replies; 7+ messages in thread
From: Frederik Deweerdt @ 2007-02-01  0:06 UTC (permalink / raw)
  To: Jose Goncalves; +Cc: linux-kernel

On Tue, Jan 30, 2007 at 12:55:49PM +0000, Jose Goncalves wrote:
> Jose Goncalves wrote:
> > Frederik Deweerdt wrote:
> >   
> >> On Fri, Jan 26, 2007 at 06:17:03PM +0000, Jose Goncalves wrote:
> >>   
> >>     
> >>> Frederik Deweerdt wrote:
> >>>     
> >>>       
> >>>> On Fri, Jan 26, 2007 at 03:50:25PM +0000, Jose Goncalves wrote:
> >>>>   
> >>>>       
> >>>>         
> >>>>> I'm having a problem with the latest 2.6.16 kernel (I've found the
> >>>>> problem on 2.6.16.37 and 2.6.16.38). I have a application that retreives
> >>>>> data from a GPS connected on a serial port. From time to time a get a
> >>>>> kernel Oops, like this:
> >>>>>
> >>>>>     
> >>>>>         
> >>>>>           
> >>>> Could you send your .config?
> >>>>   
> >>>>       
> >>>>         
> >>> Here it goes...
> >>>
> >>>     
> >>>       
> >> Thanks. It looks like something is wrong with port->ops->startup() in
> >> uart_startup(), could you apply the following patch and report the
> >> results? And btw, you're using a plain 8250 serial port, isn't it?
> >>   
> >>     
> >
> > OK. I've applied the patch and I'm now waiting for the kernel Oops...
> > sometimes it takes two days until it happens.
> > I'm using a standard 16550A serial controller found on my hardware, that
> > is a PC/104 SBC:
> >
> >  http://www.icop.com.tw/products_detail.asp?ProductID=70
> >
> > We have a custom hardware that has another serial controller (TL16C554A)
> > with 4 extra serial ports (also, 16550A type), and the problem happens
> > in a test program that is retreiving data from ttyS0 (from the SBC) and
> > ttyS3 (from our custom hardware).
> > The serial ports initialization, as reported by the kernel:
> >
> > [   15.216847] Serial: 8250/16550 driver $Revision: 1.90 $ 6 ports, IRQ
> > sharing disabled
> > [   15.219517] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> > [   15.221963] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> > [   15.223907] serial8250: ttyS2 at I/O 0x3e8 (irq = 5) is a 16550A
> > [   15.225757] serial8250: ttyS3 at I/O 0x2e8 (irq = 5) is a 16550A
> > [   15.227644] serial8250: ttyS4 at I/O 0x1a0 (irq = 6) is a 16550A
> > [   15.229656] serial8250: ttyS5 at I/O 0x1a8 (irq = 6) is a 16550A
> >
> > With your patch I'm now getting the following for each iteration of my
> > test program:
> >
> > <4>[  298.918962] type is 4
> > <4>[  298.919011] ops is c0292f00
> > <4>[  298.919033] ops->startup is c01bd777
> > <4>[  299.436980] type is 4
> > <4>[  299.437030] ops is c0292f00
> > <4>[  299.437051] ops->startup is c01bd777
> >
> > I don't know if it's relevant or not but the kernel is running in
> > NFS-Root mode.
> >   
> I've had a new kernel Oops with your patch applied:
> 
> <4>[35769.361941] type is 4
> <4>[35769.361994] ops is c0292f00
> <4>[35769.362016] ops->startup is c01bd777
> <4>[35769.958983] type is 4
> <4>[35769.959038] ops is c0292f00
> <4>[35769.959060] ops->startup is c01bd777
> <1>[35769.959201] Unable to handle kernel NULL pointer dereference at
> virtual address 00000000
> <1>[35769.966797]  printing eip:
> <4>[35769.974265] 00000000
> <1>[35769.974296] *pde = 00000000
> <0>[35769.981814] Oops: 0000 [#1]
> <4>[35769.989367] Modules linked in:
> <0>[35769.996955] CPU:    0
> <4>[35769.996974] EIP:    0060:[<00000000>]    Not tainted VLI
> <4>[35769.996990] EFLAGS: 00010202   (2.6.16.38-mtm4-debug2 #1)
> <0>[35770.020533] EIP is at rest_init+0x3feffdc0/0x1e
> <0>[35770.029044] eax: 00000060   ebx: 00000000   ecx: 00000000   edx:
> 000002fd
> <0>[35770.038017] esi: 00000000   edi: 00000040   ebp: 00000202   esp:
> c72e9e34
> <0>[35770.047118] ds: 007b   es: 007b   ss: 0068
> <0>[35770.056257] Process gp_position (pid: 15013, threadinfo=c72e8000
> task=c11a15a0)
> <0>[35770.057042] Stack: <0>c02fae70 00000005 c02fae70 c77f6de0 c12815e4
> c77714e0 c01ba4c4 c02fae70
> <0>[35770.077407]        c025f18a c01bd777 c025f17f c0292f00 c025f173
> 00000004 c12815e4 00000000
> <0>[35770.089263]        c77714e0 c77714e0 c01bbacc c12815e4 00000000
> ffffffed c77714e0 00000100
> <0>[35770.101473] Call Trace:
> <0>[35770.113147]  [<c01ba4c4>] uart_startup+0x8d/0x120
> <0>[35770.125473]  [<c01bd777>] serial8250_startup+0x0/0x2a5
> <0>[35770.138071]  [<c01bbacc>] uart_open+0xaa/0xec
> <0>[35770.150859]  [<c01a9e67>] tty_open+0x16c/0x270
> <0>[35770.163665]  [<c013dbbb>] chrdev_open+0xd7/0xf0
> <0>[35770.176636]  [<c013dae4>] chrdev_open+0x0/0xf0
> <0>[35770.189587]  [<c0136449>] __dentry_open+0xb4/0x180
> <0>[35770.202755]  [<c01365e8>] nameidata_to_filp+0x1f/0x31
> <0>[35770.216107]  [<c013654c>] do_filp_open+0x37/0x3f
> <0>[35770.229554]  [<c0137bc0>] __fput+0x11e/0x126
> <0>[35770.242947]  [<c018f64f>] strncpy_from_user+0x2e/0x4c
> <0>[35770.256773]  [<c013668d>] get_unused_fd+0x4c/0x91
> <0>[35770.270556]  [<c013676c>] do_sys_open+0x40/0xb5
> <0>[35770.284545]  [<c01367f4>] sys_open+0x13/0x17
> <0>[35770.298620]  [<c01023d9>] syscall_call+0x7/0xb
> <0>[35770.312965] Code:  Bad EIP value.
> <4>[35770.357131]  type is 4
> <4>[35775.528001] ops is c0292f00
> <4>[35775.541519] ops->startup is c01bd777
> 
Duh, not what I expected :(. is there a way that I could get your vmlinux
file? Alternatively, could you get which code is at 0xc02fae70 ?

Regards,
Frederik

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2007-02-01  0:06 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-01-26 15:50 Oops on serial access on kernel 2.6.16.38 Jose Goncalves
2006-12-26 20:10 ` Frederik Deweerdt
2007-01-26 18:17   ` Jose Goncalves
2007-01-26 21:22     ` Frederik Deweerdt
2007-01-29 15:05       ` Jose Goncalves
2007-01-30 12:55         ` Jose Goncalves
2007-02-01  0:06           ` Frederik Deweerdt

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).