LKML Archive on
help / color / mirror / Atom feed
From: Pierre Ossman <>
To: Robert Hancock <>
Cc: linux-kernel <>,
Subject: Re: wbsd: IRQ handler type mismatch
Date: Tue, 06 Feb 2007 08:01:06 +0100	[thread overview]
Message-ID: <> (raw)
In-Reply-To: <>

Robert Hancock wrote:
> It looks like wbsd is being loaded first, which being a nice PnP device
> sees that IRQ 6 is available and grabs it. Then the we try to load the
> floppy module (which is hard-coded to use IRQ 6) which fails because
> wbsd already owns IRQ6 (which is fine, there's no floppy controller
> anyway). The mismatch is occurring because wbsd passes IRQF_SHARED
> whereas floppy doesn't. I assume one of the two is likely wrong. Should
> wbsd really be passing IRQF_SHARED here? This is an LPC device which
> uses ISA-style edge triggered interrupts, is it safe to try and share an
> interrupt with this chip anyway?

This is all perfectly valid. The wbsd hw and driver can handle sharing the
interrupt line, while the floppy cannot. If you want to avoid this, then don't
load the floppy driver or assign another irq for wbsd.

     -- Pierre Ossman

  Linux kernel, MMC maintainer
  PulseAudio, core developer
  rdesktop, core developer

  reply	other threads:[~2007-02-06  7:01 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-06  3:16 Robert Hancock
2007-02-06  7:01 ` Pierre Ossman [this message]
2007-02-06 11:30 ` [PATCH] kernel: shut up the IRQ mismatch messages (Re: wbsd: IRQ handler type mismatch) Alan
2007-02-06 19:29   ` Andrew Morton
2007-02-06 19:46     ` Alan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \
    --subject='Re: wbsd: IRQ handler type mismatch' \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).