LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Srinivasa Ds <srinivasa@in.ibm.com>
To: Frederik Deweerdt <deweerdt@free.fr>
Cc: Christoph Hellwig <hch@infradead.org>,
	linux-kernel@vger.kernel.org, akpm@osdl.org, torvalds@osdl.org,
	jkenisto@us.ibm.com, anil.s.keshavamurthy@intel.com,
	prasanna@in.ibm.com, ananth@in.ibm.com
Subject: Re: [RFC] [PATCH] To list all active probes in the system
Date: Wed, 07 Feb 2007 10:55:23 +0530	[thread overview]
Message-ID: <45C962C3.2020904@in.ibm.com> (raw)
In-Reply-To: <20070206145609.GA11249@slug>

[-- Attachment #1: Type: text/plain, Size: 3422 bytes --]

Frederik Deweerdt wrote:
> Hi,
> 
> Comments below,
> 
> On Tue, Feb 06, 2007 at 08:17:06PM +0530, Srinivasa Ds wrote:
>> Srinivasa Ds wrote:
>>> Christoph Hellwig wrote:
>>>> On Tue, Feb 06, 2007 at 03:25:35PM +0530, Srinivasa Ds wrote:
>>>>> Hi folks
>>>>>
>>>>>         I have developed a patch, that lists all active probes in the
>>>>> system. I have done this through /proc interface. Currently list is
>>>>> available under /proc/kprobes/list. Any suggestions for better place and
>>>>> name??
>>>> /debug/kprobes/list? :)
>>>>
>>> Good Idea, I will update my patch to use debugfs.
>> Patch that uses debugfs.
>>
>> Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>
>>
>>
>>
>>
>>
> 
>>  fs/debugfs/inode.c      |    4 ++
>>  include/linux/kprobes.h |    4 ++
>>  kernel/kprobes.c        |   92 ++++++++++++++++++++++++++++++++++++++++++++++++
>>  3 files changed, 100 insertions(+)
>>
>> Index: linux-2.6.20/fs/debugfs/inode.c
>> ===================================================================
>> --- linux-2.6.20.orig/fs/debugfs/inode.c
>> +++ linux-2.6.20/fs/debugfs/inode.c
>> @@ -25,6 +25,7 @@
>>  #include <linux/namei.h>
>>  #include <linux/debugfs.h>
>>  #include <linux/fsnotify.h>
>> +#include <linux/kprobes.h>
>>  
>>  #define DEBUGFS_MAGIC	0x64626720
>>  
>> @@ -320,6 +321,9 @@ static int __init debugfs_init(void)
>>  	retval = register_filesystem(&debug_fs_type);
>>  	if (retval)
>>  		subsystem_unregister(&debug_subsys);
>> +#ifdef CONFIG_KPROBES
>> +	debugfs_kprobe_init();
>> +#endif
> The ifdef here could be skipped if ....
>>  	return retval;
>>  }
>>  
> [... snip ...]
>> Index: linux-2.6.20/include/linux/kprobes.h
>> ===================================================================
>> --- linux-2.6.20.orig/include/linux/kprobes.h
>> +++ linux-2.6.20/include/linux/kprobes.h
>> @@ -203,6 +203,7 @@ struct kretprobe_instance *get_free_rp_i
>>  void add_rp_inst(struct kretprobe_instance *ri);
>>  void kprobe_flush_task(struct task_struct *tk);
>>  void recycle_rp_inst(struct kretprobe_instance *ri, struct hlist_head *head);
>> +void debugfs_kprobe_init(void);
>>  #else /* CONFIG_KPROBES */
>>  
>>  #define __kprobes	/**/
>> @@ -240,5 +241,8 @@ static inline void unregister_kretprobe(
>>  static inline void kprobe_flush_task(struct task_struct *tk)
>>  {
>>  }
>> +static inline void proc_kprobe_init(void)
>> +{
>> +}
> ... this was renamed to debugfs_kprobe_init() instead -which was your
> first intention I suppose ;)-
> 
> Regards,
> Frederik

Oh, Iam sorry, It should be renamed to debugfs_kprobe_init().

So finally

 My patch lists all active probes in the system by scanning through
kprobe_table[]. It takes care of aggregate handlers and prints the type
of the probe.
Letter "k" for kprobes, "j" for jprobes, "r" for kretprobes. It also
lists address of the instruction,its symbolic name(function name +
offset) and the module name. One can access this file through
/sys/kernel/debug/kprobes/list.

Output looks like this
=====================
llm40:~/a # cat /sys/kernel/debug/kprobes/list
c0169ae3  r  sys_read+0x0
c0169ae3  k  sys_read+0x0
c01694c8  k  vfs_write+0x0
c0167d20  r  sys_open+0x0
f8e658a6  k  reiserfs_delete_inode+0x0  reiserfs
c0120f4a  k  do_fork+0x0
c0120f4a  j  do_fork+0x0
c0169b4a  r  sys_write+0x0
c0169b4a  k  sys_write+0x0
c0169622  r  vfs_read+0x0
=================================


Signed-off-by: Srinivasa DS <srinivasa@in.ibm.com>



[-- Attachment #2: final-2.fix --]
[-- Type: text/plain, Size: 4396 bytes --]

 fs/debugfs/inode.c      |    2 +
 include/linux/kprobes.h |    4 ++
 kernel/kprobes.c        |   92 ++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 98 insertions(+)

Index: linux-2.6.20/fs/debugfs/inode.c
===================================================================
--- linux-2.6.20.orig/fs/debugfs/inode.c
+++ linux-2.6.20/fs/debugfs/inode.c
@@ -25,6 +25,7 @@
 #include <linux/namei.h>
 #include <linux/debugfs.h>
 #include <linux/fsnotify.h>
+#include <linux/kprobes.h>
 
 #define DEBUGFS_MAGIC	0x64626720
 
@@ -320,6 +321,7 @@ static int __init debugfs_init(void)
 	retval = register_filesystem(&debug_fs_type);
 	if (retval)
 		subsystem_unregister(&debug_subsys);
+	debugfs_kprobe_init();
 	return retval;
 }
 
Index: linux-2.6.20/kernel/kprobes.c
===================================================================
--- linux-2.6.20.orig/kernel/kprobes.c
+++ linux-2.6.20/kernel/kprobes.c
@@ -39,6 +39,8 @@
 #include <linux/moduleloader.h>
 #include <linux/kallsyms.h>
 #include <linux/freezer.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
 #include <asm-generic/sections.h>
 #include <asm/cacheflush.h>
 #include <asm/errno.h>
@@ -815,6 +817,96 @@ static int __init init_kprobes(void)
 	return err;
 }
 
+static void __kprobes report_probe(struct seq_file *pi, struct kprobe *p,
+               const char *sym, int offset,char *modname)
+{
+	char *kprobe_type;
+
+	if (p->pre_handler == pre_handler_kretprobe)
+		kprobe_type = "r";
+	else if (p->pre_handler == setjmp_pre_handler)
+		kprobe_type = "j";
+	else
+		kprobe_type = "k";
+	if (sym)
+		seq_printf(pi, "%p  %s  %s+0x%x  %s\n", p->addr, kprobe_type,
+			sym, offset, (modname ? modname : " "));
+	else
+		seq_printf(pi, "%p  %s  %p\n", p->addr, kprobe_type, p->addr);
+}
+
+void __kprobes *kprobe_seq_start(struct seq_file *f, loff_t *pos)
+{
+	return (*pos < KPROBE_TABLE_SIZE) ? pos : NULL;
+}
+
+void __kprobes *kprobe_seq_next(struct seq_file *f, void *v, loff_t *pos)
+{
+	(*pos)++;
+	if (*pos >= KPROBE_TABLE_SIZE)
+		return NULL;
+	return pos;
+}
+
+void __kprobes kprobe_seq_stop(struct seq_file *f, void *v)
+{
+	/* Nothing to do */
+}
+
+int __kprobes show_kprobe_addr(struct seq_file *pi, void *v)
+{
+	struct hlist_head *head;
+	struct hlist_node *node;
+	struct kprobe *p, *kp;
+	unsigned int i = *(loff_t *) v;
+	unsigned long size, offset = 0;
+	char *modname, namebuf[128];
+	const char *sym = NULL;
+
+	head = &kprobe_table[i];
+	preempt_disable();
+	hlist_for_each_entry_rcu(p, node, head, hlist) {
+		sym = kallsyms_lookup((unsigned long)p->addr, &size,
+					&offset, &modname, namebuf);
+		if (p->pre_handler == aggr_pre_handler) {
+			list_for_each_entry_rcu(kp, &p->list, list)
+				report_probe(pi, kp, sym, offset, modname);
+		} else
+			report_probe(pi, p, sym, offset, modname);
+	}
+	preempt_enable();
+	return 0;
+}
+
+struct seq_operations kprobes_seq_ops = {
+	.start = kprobe_seq_start,
+	.next  = kprobe_seq_next,
+	.stop  = kprobe_seq_stop,
+	.show  = show_kprobe_addr
+};
+
+static int __kprobes kprobes_open(struct inode *inode, struct file *filp)
+{
+	return seq_open(filp, &kprobes_seq_ops);
+}
+
+static struct file_operations proc_kprobes_operations = {
+	.open           = kprobes_open,
+	.read           = seq_read,
+	.llseek         = seq_lseek,
+	.release        = seq_release,
+};
+
+void __kprobes debugfs_kprobe_init(void)
+{
+	struct dentry *dir;
+	
+	dir = debugfs_create_dir("kprobes", NULL);
+	if (dir == NULL)
+		return;
+	debugfs_create_file("list", 0444, dir , 0 , &proc_kprobes_operations);
+}
+
 __initcall(init_kprobes);
 
 EXPORT_SYMBOL_GPL(register_kprobe);
Index: linux-2.6.20/include/linux/kprobes.h
===================================================================
--- linux-2.6.20.orig/include/linux/kprobes.h
+++ linux-2.6.20/include/linux/kprobes.h
@@ -203,6 +203,7 @@ struct kretprobe_instance *get_free_rp_i
 void add_rp_inst(struct kretprobe_instance *ri);
 void kprobe_flush_task(struct task_struct *tk);
 void recycle_rp_inst(struct kretprobe_instance *ri, struct hlist_head *head);
+void debugfs_kprobe_init(void);
 #else /* CONFIG_KPROBES */
 
 #define __kprobes	/**/
@@ -240,5 +241,8 @@ static inline void unregister_kretprobe(
 static inline void kprobe_flush_task(struct task_struct *tk)
 {
 }
+static inline void debugfs_kprobe_init(void)
+{
+}
 #endif				/* CONFIG_KPROBES */
 #endif				/* _LINUX_KPROBES_H */

  reply	other threads:[~2007-02-07  5:25 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-06  9:55 Srinivasa Ds
2007-02-06 10:06 ` Christoph Hellwig
2007-02-06 10:22   ` Srinivasa Ds
2007-02-06 14:47     ` Srinivasa Ds
2007-02-06 14:56       ` Frederik Deweerdt
2007-02-07  5:25         ` Srinivasa Ds [this message]
2007-02-07 22:27           ` Andrew Morton
2007-02-08 11:46             ` [RFC] [PATCH] To list all active probes in the system---Take-2 Srinivasa Ds
2007-02-09  8:03               ` Andrew Morton
2007-02-12  8:45               ` Andrew Morton
2007-02-12  9:29                 ` Ananth N Mavinakayanahalli
2007-02-06 10:13 ` [RFC] [PATCH] To list all active probes in the system Andrew Morton
2007-02-06 10:21   ` Srinivasa Ds
2007-02-06 20:36   ` Ingo Molnar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=45C962C3.2020904@in.ibm.com \
    --to=srinivasa@in.ibm.com \
    --cc=akpm@osdl.org \
    --cc=ananth@in.ibm.com \
    --cc=anil.s.keshavamurthy@intel.com \
    --cc=deweerdt@free.fr \
    --cc=hch@infradead.org \
    --cc=jkenisto@us.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=prasanna@in.ibm.com \
    --cc=torvalds@osdl.org \
    --subject='Re: [RFC] [PATCH] To list all active probes in the system' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).