LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Jan Beulich" <jbeulich@novell.com>
To: <alan@redhat.com>
Cc: <linux-kernel@vger.kernel.org>
Subject: [PATCH, RFC] adjust legacy IDE resource setting
Date: Wed, 14 Feb 2007 15:05:24 +0000	[thread overview]
Message-ID: <45D33344.76E4.0078.0@novell.com> (raw)

The change to force legacy mode IDE channels' resources to fixed
non-zero values confuses (at least some versions of) X, because the
values reported by the kernel and those readable from PCI config space
aren't consistent anymore. Therefore, this patch arranges for the
respective BARs to also get updated if possible.

Signed-off-by: Jan Beulich <jbeulich@novell.com>

--- linux-2.6.20/drivers/pci/probe.c	2007-02-04 19:44:54.000000000 +0100
+++ 2.6.20-pci-ide-legacy/drivers/pci/probe.c	2007-02-14 15:54:58.000000000 +0100
@@ -639,7 +639,29 @@ static void pci_read_irq(struct pci_dev 
 	dev->irq = irq;
 }
 
-#define LEGACY_IO_RESOURCE	(IORESOURCE_IO | IORESOURCE_PCI_FIXED)
+static void change_legacy_io_resource(struct pci_dev * dev, unsigned index,
+                                      unsigned start, unsigned end)
+{
+	unsigned base = start & PCI_BASE_ADDRESS_IO_MASK;
+	unsigned len = (end | ~PCI_BASE_ADDRESS_IO_MASK) - base + 1;
+
+	if (!(pci_resource_flags(dev, index) & IORESOURCE_IO))
+		printk(KERN_WARNING "%s: cannot adjust BAR%u (not I/O)\n",
+		       pci_name(dev), index);
+	else if (pci_resource_len(dev, index) != len)
+		printk(KERN_WARNING "%s: cannot adjust BAR%u (size %04X)\n",
+		       pci_name(dev), index, (unsigned)pci_resource_len(dev, index));
+	else {
+		printk(KERN_INFO "%s: trying to change BAR%u from %04X to %04X\n",
+		       pci_name(dev), index,
+		       (unsigned)pci_resource_start(dev, index), base);
+		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + index * 4, base);
+	}
+	pci_resource_start(dev, index) = start;
+	pci_resource_end(dev, index)   = end;
+	pci_resource_flags(dev, index) =
+		IORESOURCE_IO | IORESOURCE_PCI_FIXED | PCI_BASE_ADDRESS_SPACE_IO;
+}
 
 /**
  * pci_setup_device - fill in class and map information of a device
@@ -692,20 +714,12 @@ static int pci_setup_device(struct pci_d
 			u8 progif;
 			pci_read_config_byte(dev, PCI_CLASS_PROG, &progif);
 			if ((progif & 1) == 0) {
-				dev->resource[0].start = 0x1F0;
-				dev->resource[0].end = 0x1F7;
-				dev->resource[0].flags = LEGACY_IO_RESOURCE;
-				dev->resource[1].start = 0x3F6;
-				dev->resource[1].end = 0x3F6;
-				dev->resource[1].flags = LEGACY_IO_RESOURCE;
+				change_legacy_io_resource(dev, 0, 0x1F0, 0x1F7);
+				change_legacy_io_resource(dev, 1, 0x3F6, 0x3F6);
 			}
 			if ((progif & 4) == 0) {
-				dev->resource[2].start = 0x170;
-				dev->resource[2].end = 0x177;
-				dev->resource[2].flags = LEGACY_IO_RESOURCE;
-				dev->resource[3].start = 0x376;
-				dev->resource[3].end = 0x376;
-				dev->resource[3].flags = LEGACY_IO_RESOURCE;
+				change_legacy_io_resource(dev, 2, 0x170, 0x177);
+				change_legacy_io_resource(dev, 3, 0x376, 0x376);
 			}
 		}
 		break;



             reply	other threads:[~2007-02-14 15:05 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-14 15:05 Jan Beulich [this message]
2007-02-14 15:40 ` Alan
2007-02-14 15:46   ` Jan Beulich
2007-02-14 16:09     ` Alan
2007-03-07 18:10       ` Petri Kaukasoina

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=45D33344.76E4.0078.0@novell.com \
    --to=jbeulich@novell.com \
    --cc=alan@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [PATCH, RFC] adjust legacy IDE resource setting' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).