LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* 2.6.21-rc2-mm2
@ 2007-03-06 8:44 Andrew Morton
2007-03-06 9:06 ` 2.6.21-rc2-mm2 J.A. Magallón
` (9 more replies)
0 siblings, 10 replies; 48+ messages in thread
From: Andrew Morton @ 2007-03-06 8:44 UTC (permalink / raw)
To: linux-kernel
Temporarily at
http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
Will appear later at
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc2/2.6.20-rc2-mm2/
- git-block.patch is having problems which are getting in the way - it has
been dropped.
- As a consequence all the AIO patches were dropped
- Some MM patches were dropped:
- lumpy-reclaim is being redone
- remove-mlocked-pages-from-the-LRU: is being redone
- remove-anon-pages-from-the-LRU-if-we-have-no-swap: ditto
- Merged Mel's MM patches: GFP_MOVABLE and anti-fragmentation. I don't
yet know if we want to do this, but let's get the code some more test and
eyeball time.
- Lots of patches were folded into their base patches.
Boilerplate:
- See the `hot-fixes' directory for any important updates to this patchset.
- To fetch an -mm tree using git, use (for example)
git-fetch git://git.kernel.org/pub/scm/linux/kernel/git/smurf/linux-trees.git tag v2.6.16-rc2-mm1
git-checkout -b local-v2.6.16-rc2-mm1 v2.6.16-rc2-mm1
- -mm kernel commit activity can be reviewed by subscribing to the
mm-commits mailing list.
echo "subscribe mm-commits" | mail majordomo@vger.kernel.org
- If you hit a bug in -mm and it is not obvious which patch caused it, it is
most valuable if you can perform a bisection search to identify which patch
introduced the bug. Instructions for this process are at
http://www.zip.com.au/~akpm/linux/patches/stuff/bisecting-mm-trees.txt
But beware that this process takes some time (around ten rebuilds and
reboots), so consider reporting the bug first and if we cannot immediately
identify the faulty patch, then perform the bisection search.
- When reporting bugs, please try to Cc: the relevant maintainer and mailing
list on any email.
- When reporting bugs in this kernel via email, please also rewrite the
email Subject: in some manner to reflect the nature of the bug. Some
developers filter by Subject: when looking for messages to read.
- Occasional snapshots of the -mm lineup are uploaded to
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/mm/ and are announced on
the mm-commits list.
Changes since 2.6.20-rc2-mm1:
origin.patch
git-acpi.patch
git-alsa.patch
git-arm.patch
git-avr32.patch
git-cifs.patch
git-cpufreq.patch
git-drm.patch
git-dvb.patch
git-gfs2-nmw.patch
git-hid.patch
git-ia64.patch
git-ieee1394.patch
git-input.patch
git-leds.patch
git-libata-all.patch
git-md-accel.patch
git-mmc.patch
git-ubi.patch
git-netdev-all.patch
git-ioat.patch
git-ocfs2.patch
git-parisc.patch
git-r8169.patch
git-selinux.patch
git-pciseg.patch
git-s390.patch
git-sh.patch
git-unionfs.patch
git-watchdog.patch
git-wireless.patch
git-wireless-fixup.patch
git-ipwireless_cs.patch
git-gccbug.patch
git trees
-cyclades-return-closing_wait.patch
-io_apic-needs-apicdefh.patch
-msi-sanely-support-hardware-level-msi-disabling.patch
-msi-fixup-the-msi-enable-disable-logic.patch
-msi-support-masking-msi-irqs-without-a-mask-bit.patch
-ecryptfs-check-xattr-operation-support-fix.patch
-parport-is-an-orphan.patch
-fix-soft-lockup-with-iseries-viocd-driver.patch
-add-config_generic_gpio.patch
-gpio_keys-driver-shouldnt-be-arm-specific.patch
-dz-remove-struct-pt_regs-references.patch
-schedule-wext-rtnl-for-removal.patch
-shmem-and-simple-const-super_operations.patch
-sched-remove-smt-nice.patch
-fb-sm501fb-off-by-1-sysfs-store.patch
-fix-radeon-blanking-return-value.patch
-page-migration-fix-vma-flag-checking.patch
-vmi-timer-fixes-round-two.patch
-vmi-sched-clock-paravirt-op-fix.patch
-vmi-cpu-cycles-fix.patch
-vmi-fix-highpte.patch
-vmi-paravirt-drop-udelay-op.patch
-vmi-pit-override.patch
-vmi-fix-nohz-compile.patch
-vmi-apic-ops.patch
-vmi-smp-fixes.patch
-pvrusb-warning-fix.patch
-git-leds-fixup.patch
-git-leds-make-it-compile.patch
-libata-core-fix-simplex-handling.patch
-libata-dev_config-does-not-need-ap-and-adev-passing.patch
-ide-alim15x3-fix-pio-mode-setup.patch
-ide-cmd64x-fix-pio-mode-setup-take3.patch
-ide-ide-fix-drive-side-80c-cable-check.patch
-ide-cmd64x-fix-recovery-time-calculation.patch
-ide-piix-slc90e66-more-tuneproc-fixing-take2.patch
-ide-ide-get-best-pio-mode-returns-incorrect-iordy-setting-take2.patch
-ide-ide-cs-update-device-table.patch
-ide-ide-fix-pmac-breakage.patch
-ide-pci-adjust-legacy-ide-resource-setting-v2.patch
-ide-siimage-drac4-note.patch
-ide-ide-remove-a-ton-of-pointless-undef-really-slow-io.patch
-ide-ide-max-dma-mode-v2.patch
-ide-ide-remove-obsolete-params-v2.patch
-ide-ide-legacy-params-v2.patch
-ide-delkin_cb-pci_module_init-to-pci_register_driver.patch
-ide-ide-fix-pmac-breakage-fix.patch
-ehea-dynamic-add--remove-port.patch
-ehea-dynamic-add--remove-port-update.patch
-fix-mv643xx_eth-compilation.patch
-parisc-unbreak-setupc-re-command_line.patch
-pcie-fix-section-mismatch-warning.patch
-aer-fix-section-mismatch-warning.patch
-usb-serial-secret-patch.patch
-ecryptfs-handles-aop_truncated_page-better.patch
-atyfb-replace-busy-loop-with-mdelay.patch
-atyfb-fix-kconfig-error.patch
Merged into mainline or a subsystem tree
+paravirt-build-fixes.patch
+fix-suspend-resume-with-periodic-tick-devices.patch
+nvidiafb-backlight-fix-implicit-declaration-in-nv_backlight.patch
+atyfb-fix-kconfig-error-part-2.patch
+fbdev-fix-kconfig-error-if-fb_ddc=n.patch
+fix-2621-rfcomm-lockups.patch
+scheduled-removal-of-sa_xxx-interrupt-flags-fixups-3.patch
+i386-make-x86_64-tsc-header-require-i386-rather-than-vice-versa.patch
+hrtimers-fix-hrtimer_cb_irqsafe_no_softirq-description.patch
+hrtimers-hrtimer_clock_base-description-typo.patch
+highres-do-not-run-the-timer_softirq-after-switching-to-highres-mode.patch
+highres-do-not-run-the-timer_softirq-after-switching-to-highres-mode-tweak.patch
+highres-do-not-run-the-timer_softirq-after-switching-to-highres-mode-tweak-fix.patch
+kconfig-update-swsusp-description.patch
+remove-arch-i386-kernel-tscccustom_sched_clock.patch
+mqueue-nested-locking-annotation.patch
+fix-vsyscall-settimeofday.patch
+fs-nobh_truncate_page-fix.patch
+geode-aes-use-unsigned-long-for-spin_lock_irqsave.patch
+publish-rcutorture-module-parameters-via-sysfs-read-only.patch
+cciss-fix-for-2tb-support.patch
+cciss-add-struct-pci_driver-shutdown-support-replaces-reboot-notifier.patch
+initramfs-should-not-depend-on-config_block.patch
+linux-audith-needs-linux-typesh.patch
+uml-fix-formatting-violations-in-signal-delivery-code.patch
+uml-add-a-debugging-message.patch
+uml-comment-the-initialization-of-a-global.patch
knfsd-use-recv_msg-to-get-peer-address-for-nfsd-instead-of-code-copying.patch
knfsd-remove-config_ipv6-ifdefs-from-sunrpc-server-code.patch
+knfsd-fix-recently-introduced-problem-with-shutting-down-a-busy-nfs-server.patch
+sdhci-handle-resumed-devices.patch
+ecryptfs-nested-locking-annotation.patch
+knfsd-provide-sunrpc-pool_mode-module-option.patch
2.6.21 queue
-git-acpi-fix-cpuidle-borkage.patch
+git-acpi-fix-cpuidle-borkage-2.patch
New version
+drivers-cpuidle-make-code-static.patch
ACPi cleanup
+fix-acpi-documentation-in-kernel-parameterstxt.patch
ACPI documentation fix
+gregkh-driver-remove-devfs-from-maintainers.patch
+gregkh-driver-driver-core-export-device_rename.patch
Driver tree updates
+make-drivers-char-drm-drm_vmcdrm_io_prot-static.patch
DRM cleanup
-git-dvb-fixup.patch
Unneeded
+dvb-core-fix-several-locking-related-problems.patch
+saa7134-fix-modules=n-compilation.patch
DVB fixes
+gfs2-build-fix.patch
Fix git-gfs2-nmw.patch
+ia64-kexec-use-efi_loader_data-for-elf-core-header.patch
+ia64-kexec-use-efi_loader_data-for-elf-core-header-tidy.patch
ia64 fixes
+wistron-button-support-for-travelmate-610.patch
Input device support
-allow-kernel-to-build-on-cygwin.patch
Dropped
+pata_cmd640-cmd640-pci-support.patch
+libata-kconfig-update-the-various-experimentality-levels.patch
+sata_nv-dont-read-shadow-registers-when-in-adma-mode.patch
+pata_pdc202xx_old-fix-data-corruption-and-other-problems.patch
sata/pata updates
+ide-cmd64x-fix-recovery-time-calculation-take2.patch
+ide-cmd64x-add-back-mwdma-support.patch
+ide-ide-max-dma-mode-v3.patch
IDE tree updates
+git-mmc-fix-99.patch
Fix git-mmc.
+nommu-make-it-possible-for-romfs-to-use-mtd-devices-fix.patch
Fix nommu-make-it-possible-for-romfs-to-use-mtd-devices.patch
+mtd-esb2-check-for-closed-rom-window.patch
MTD fix
+git-netdev-all-ipw2200-fix.patch
Fix git-netdev-all.patch
+mv643xx-ethernet-driver-irq-registration-fix.patch
+network-add-the-missing-phy_device-speed-information-to-phy_mii_ioctl.patch
netdev updates
-cisco_ioctl-initialise-header_cache_update.patch
Dropped
+div64_64-common-code.patch
+div64_64-common-code-fix.patch
Implement div64_64()
+drivers-net-bonding-bond_maincmake-3-functions-static.patch
Bonding cleanup
+bluetooth-fix-socket-locking-in-hci_sock_dev_event.patch
bluetooth fix
+gregkh-pci-pcie-fix-section-mismatch-warning.patch
+gregkh-pci-pci-aer-fix-section-mismatch-warning.patch
+gregkh-pci-pci-fix-section-mismatch-warning.patch
PCI tree updates
-scsi-megaraid_sas-throttle-io-if-fw-is-busy.patch
-scsi-megaraid_sas-return-sync-cache-call-with-success.patch
+scsi-megaraid_sas-throttle-io-if-cmds-are-in-risk-of.patch
Update megaraid patches
-revert-md-avoid-possible-bug_on-in-md-bitmap-handling-for-git-block.patch
-git-block.patch
-git-block-fixup.patch
-git-block-dupe-definitions.patch
-git-block-xfs-barriers-broke.patch
The death of git-block
+gregkh-usb-usb-pxa2xx_udc-fix-hardcoded-irq-number.patch
+gregkh-usb-usb-ratelimit-debounce-error-messages.patch
+gregkh-usb-usb-fix-skeleton-driver.patch
+gregkh-usb-usb-kill-bkl-in-skeleton-driver.patch
+gregkh-usb-usb-kill-dead-code-from-hubc.patch
+gregkh-usb-usb-new-device-ids-for-cp2101-driver.patch
+gregkh-usb-usb-add-ql355p-power-supply-ids-to-fdti_sio.patch
+gregkh-usb-usb-add-additional-pids-in-ftdi_sio.patch
+gregkh-usb-usb-serial-fix-shutdown-device_unregister-order.patch
+gregkh-usb-usb-ftdi_sio-use-port_probe-port_remove-thereby-fixing-access-to-the-latency_timer.patch
+gregkh-usb-usb-rts-dtr-signal-patch-for-airprime-driver.patch
+gregkh-usb-usb-fix-usb-serial-device-naming-bug.patch
+gregkh-usb-usb-further-fix-for-usb-serial.patch
+gregkh-usb-usb-kill-bkl-in-usblcd.patch
+gregkh-usb-usb-ipaqc-additional-devices.patch
+gregkh-usb-usbnet-dm9501-add-corega-fether-usb-txc-support.patch
+gregkh-usb-usb-additional-structure-from-cdc-spec.patch
+gregkh-usb-usb-cdc-acm-export-parsed-capabilities-through-sysfs.patch
USB updates
+git-wireless-fixup.patch
Fix rejects in git-wireless.patch
+x86_64-mm-pit_latch_buggy-has-no-effect.patch
x86_64 tree updates
-fully-honor-vdso_enabled.patch
Dropped
+x86_64-irq-remove-extra-smp_processor_id-calling.patch
+x86_64-irq-make-affinity-works-for-genapic_flat-mode.patch
+x86_64-irq-make-affinity-works-for-genapic_flat-mode-tidy.patch
x86_64 IRQ fixes
+x86_64-map-fake-nodes-to-real-nodes-fix.patch
Fix x86_64-map-fake-nodes-to-real-nodes.patch
+i386-vdso_prelink-warning-fix.patch
Fix warning
+use-the-apic-to-determine-the-hardware-processor-id-i386-fix.patch
Fix use-the-apic-to-determine-the-hardware-processor-id-i386.patch
+i386-extend-alternative-instructions-framework.patch
+x86_64-changes-to-x86_64-architecture-for.patch
+i386-add-the-x86_feature_sync_rdtsc-flag.patch
+optimize-and-simplify-get_cycles_sync.patch
x86 updates
-acpi-fan-after-suspend-to-mem-fix.patch
Dropped
+uml-hostfs-fix-double-free.patch
+uml-hostfs-make-hostfs=-option-work-as-a-jail-as-intended.patch
+uml-fix-a-memory-leak-in-the-multicast-driver.patch
+uml-remove-dead-code-about-os_usr1_signal-and-os_usr1_process.patch
+uml-mark-both-consoles-as-con_anytime.patch
+uml-fix-confusion-irq-early-reenabling.patch
+uml-activate_fd-return-enomem-only-when-appropriate.patch
+uml-fix-errno-usage.patch
UML fixes
-safer-nr_node_ids-and-nr_node_ids-determination-and-initial-up-fix.patch
-safer-nr_node_ids-and-nr_node_ids-determination-and-initial-tweak.patch
Folded into safer-nr_node_ids-and-nr_node_ids-determination-and-initial.patch
-use-zvc-counters-to-establish-exact-size-of-dirtyable-pages-fix.patch
Folded into use-zvc-counters-to-establish-exact-size-of-dirtyable-pages.patch
-make-try_to_unmap-return-a-special-exit-code.patch
-add-nr_mlock-zvc.patch
-add-pagemlocked-page-state-bit-and-lru-infrastructure.patch
-add-pagemlocked-page-state-bit-and-lru-infrastructure-fix.patch
-logic-to-move-mlocked-pages.patch
-consolidate-new-anonymous-page-code-paths.patch
-avoid-putting-new-mlocked-anonymous-pages-on-lru.patch
-opportunistically-move-mlocked-pages-off-the-lru.patch
-take-anonymous-pages-off-the-lru-if-we-have-no-swap.patch
Dropped
-lumpy-reclaim-v2.patch
-lumpy-reclaim-v2-page_to_pfn-fix.patch
-lumpy-reclaim-v2-tidy.patch
-lumpy-reclaim-cleanup.patch
Dropped
+free-swap-space-of-reactivated-pages.patch
Might improve behaviour under swapout with limited swapspace.
+add-a-bitmap-that-is-used-to-track-flags-affecting-a-block-of-pages.patch
+add-__gfp_movable-for-callers-to-flag-allocations-from-high-memory-that-may-be-migrated.patch
+add-__gfp_movable-for-callers-to-flag-allocations-from-high-memory-that-may-be-migrated-fix.patch
+add-__gfp_movable-for-callers-to-flag-allocations-from-low-memory-that-may-be-migrated.patch
+split-the-free-lists-for-movable-and-unmovable-allocations.patch
+choose-pages-from-the-per-cpu-list-based-on-migration-type.patch
+add-a-configure-option-to-group-pages-by-mobility.patch
+drain-per-cpu-lists-when-high-order-allocations-fail.patch
+move-free-pages-between-lists-on-steal.patch
+group-short-lived-and-reclaimable-kernel-allocations.patch
+group-high-order-atomic-allocations.patch
+bias-the-placement-of-kernel-pages-at-lower-pfns.patch
+be-more-agressive-about-stealing-when-migrate_reclaimable-allocations-fallback.patch
+create-the-zone_movable-zone.patch
+allow-huge-page-allocations-to-use-gfp_high_movable.patch
+x86-specify-amount-of-kernel-memory-at-boot-time.patch
+ppc-and-powerpc-specify-amount-of-kernel-memory-at-boot-time.patch
+x86_64-specify-amount-of-kernel-memory-at-boot-time.patch
+ia64-specify-amount-of-kernel-memory-at-boot-time.patch
+add-documentation-for-additional-boot-parameter-and-sysctl.patch
Mel's stuff
-file-capabilities-dont-do-file-caps-if-mnt_nosuid.patch
-file-capabilities-honor-secure_noroot.patch
Folded into implement-file-posix-capabilities.patch
+file-capabilities-accomodate-future-64-bit-caps.patch
Fix implement-file-posix-capabilities.patch
+blackfin-on-chip-ethernet-mac-controller-driver-update.patch
+blackfin-blackfin-on-chip-spi-controller-driver.patch
blackfin updates
+nommu-hide-vm_mm-in-nommu-mode.patch
nommu tweak
-procfs-fix-race-between-proc_readdir-and-remove_proc_entry-fix.patch
Folded into procfs-fix-race-between-proc_readdir-and-remove_proc_entry.patch
-factor-outstanding-i-o-error-handling-tidy.patch
Folded into block_write_full_page-handle-enospc.patch
-fix-rmmod-read-write-races-in-proc-entries.patch
-fix-rmmod-read-write-races-in-proc-entries-fix.patch
Dropped
-filesystem-disk-errors-at-boot-time-caused-by-probe-fix.patch
Folded into filesystem-disk-errors-at-boot-time-caused-by-probe.patch
-allow-access-to-proc-pid-fd-after-setuid-fix.patch
-allow-access-to-proc-pid-fd-after-setuid-update.patch
-allow-access-to-proc-pid-fd-after-setuid-update-2.patch
Folded into allow-access-to-proc-pid-fd-after-setuid.patch
-fix-quadratic-behavior-of-shrink_dcache_parent-update.patch
Folded into fix-quadratic-behavior-of-shrink_dcache_parent.patch
-ipmi-add-new-ipmi-nmi-watchdog-handling-cleanup.patch
Folded into ipmi-add-new-ipmi-nmi-watchdog-handling.patch
-fix-__d_path-for-lazy-unmounts-and-make-it-unambiguous-tidy.patch
Folded into fix-__d_path-for-lazy-unmounts-and-make-it-unambiguous.patch
-cciss-fix-for-2tb-support.patch
-cciss-fix-for-2tb-support-again.patch
-cciss-supercedes-add-shutdown-support-replaces-reboot-notifier.patch
cciss patches were updated
-merge-sys_clone-sys_unshare-nsproxy-and-namespace-fix.patch
-merge-sys_clone-sys_unshare-nsproxy-and-namespace-fix-2.patch
Folded into merge-sys_clone-sys_unshare-nsproxy-and-namespace.patch
-timer-run-calc_load-halfway-through-each-round_jiffies.patch
Dropped
+optimize-timespec_trunc.patch
+ext3-dirindex-error-pointer-issues.patch
+the-scheduled-removal-of-obsolete_oss-options.patch
+add-epoll-compat_-code-to-fs-compatc.patch
Misc
-consolidate-generic_writepages-and-mpage_writepages-tidy.patch
Folded into consolidate-generic_writepages-and-mpage_writepages.patch
-extend-notifier_call_chain-to-count-nr_calls-made-fixes.patch
-extend-notifier_call_chain-to-count-nr_calls-made-fixes-2.patch
-extend-notifier_call_chain-to-count-nr_calls-made-fixes-3.patch
Folded into extend-notifier_call_chain-to-count-nr_calls-made.patch
-define-and-use-new-eventscpu_lock_acquire-and-cpu_lock_release-fix.patch
Folded into define-and-use-new-eventscpu_lock_acquire-and-cpu_lock_release.patch
-eliminate-lock_cpu_hotplug-in-kernel-schedc-fix.patch
Folded into eliminate-lock_cpu_hotplug-in-kernel-schedc.patch
-workqueue-dont-save-interrupts-in-run_workqueue-update-2.patch
Folded into workqueue-dont-save-interrupts-in-run_workqueue.patch
-unify-queue_delayed_work-and-queue_delayed_work_on-fix.patch
Folded into unify-queue_delayed_work-and-queue_delayed_work_on.patch
-per-backing_dev-dirty-and-writeback-page-accounting-fix.patch
Folded into per-backing_dev-dirty-and-writeback-page-accounting.patch
-ext2-fix-reservation-extension.patch
-make-ext2_get_blocks-static.patch
-ext2-balloc-fix-_with_rsv-freeze.patch
-ext2-balloc-reset-windowsz-when-full.patch
-ext2-balloc-fix-off-by-one-against-rsv_end.patch
-ext2-balloc-fix-off-by-one-against-grp_goal.patch
-ext2-balloc-say-rb_entry-not-list_entry.patch
Folded into ext2-reservations.patch
-fsaio-add-a-wait-queue-arg-to-the-wait_bit-action-routine.patch
-fsaio-add-a-wait-queue-arg-to-the-wait_bit-action-routine-gfs2-fix.patch
-fsaio-rename-__lock_page-to-lock_page_blocking.patch
-fsaio-interfaces-to-initialize-and-to-test-a-wait-bit-key.patch
-fsaio-add-a-default-io-wait-bit-field-in-task-struct.patch
-fsaio-enable-wait-bit-based-filtered-wakeups-to-work-for-aio.patch
-fsaio-enable-wait-bit-based-filtered-wakeups-to-work-for-aio-fix.patch
-fsaio-enable-wait-bit-based-filtered-wakeups-to-work-for-aio-fix-sparse-fix.patch
-fsaio-enable-asynchronous-wait-page-and-lock-page.patch
-fsaio-filesystem-aio-read.patch
-fsaio-aio-o_sync-filesystem-write.patch
-rework-compat_sys_io_submit.patch
-fix-aioh-includes.patch
-fix-access_ok-checks.patch
-make-good_sigevent-non-static.patch
-make-good_sigevent-non-static-fix.patch
-make-__sigqueue_free-and.patch
-aio-completion-signal-notification.patch
-aio-completion-signal-notification-fix.patch
-aio-completion-signal-notification-fixes-and-cleanups.patch
-aio-completion-signal-notification-small-cleanup.patch
-add-listio-syscall-support.patch
Dropped
+sched-fix-idle-load-balancing-in-softirqd-context-fix.patch
Fix sched-fix-idle-load-balancing-in-softirqd-context.patch
-speedup-divides-by-cpu_power-in-scheduler-up-fix.patch
Folded into speedup-divides-by-cpu_power-in-scheduler.patch
+sched-optimize-siblings-status-check-logic-in-wake_idle.patch
scheduler speedup.
-sched2-sched-domain-sysctl-use-ctl_unnumbered.patch
Folded into sched2-sched-domain-sysctl.patch
-mm-implement-swap-prefetching-vs-zvc-stuff.patch
-mm-implement-swap-prefetching-vs-zvc-stuff-2.patch
-mm-implement-swap-prefetching-use-ctl_unnumbered.patch
-swap_prefetch-vs-zoned-counters.patch
-add-include-linux-freezerh-and-move-definitions-from-prefetch.patch
-zvc-support-nr_slab_reclaimable--nr_slab_unreclaimable-swap_prefetch.patch
-reduce-max_nr_zones-swap_prefetch-remove-incorrect-use-of-zone_highmem.patch
-sched-cleanup-remove-task_t-convert-to-struct-task_struct-prefetch.patch
-numa-add-zone_to_nid-function-swap_prefetch.patch
-remove-uses-of-kmem_cache_t-from-mm-and-include-linux-slabh-prefetch.patch
Folded into mm-implement-swap-prefetching.patch
+add-__gfp_movable-for-callers-to-flag-allocations-from-high-memory-that-may-be-migrated-swap-prefetch.patch
Fix swap-prefetch for Mel's stuff
-lutimesat-compat-syscall-and-wire-up-on-x86_64-tidy.patch
Folded into lutimesat-compat-syscall-and-wire-up-on-x86_64.patch
+blackfin-blackfin-utrace-patch.patch
utrace for blackfin
+utrace-nommu-fixup-support-utrace.patch
Fix utrace
-atomich-add-atomic64-cmpxchg-xchg-and-add_unless-to-powerpc-fix.patch
-atomich-add-atomic64-cmpxchg-xchg-and-add_unless-to-powerpc-fix-2.patch
Folded into atomich-add-atomic64-cmpxchg-xchg-and-add_unless-to-powerpc.patch
-local_t-mips-extension-fix.patch
-local_t-mips-extension-shrink-duplicated-mips-32-64-bits-functions-from-localh.patch
-local_t-mips-extension-shrink-duplicated-mips-32-64-bits-functions-from-localh-fix.patch
-local_t-mips-extension-shrink-duplicated-mips-32-64-bits-functions-from-localh-fix-2.patch
Folded into local_t-mips-extension.patch
-local_t-powerpc-extension-fix.patch
-local_t-powerpc-extension-shrink-powerpc-localh.patch
-local_t-powerpc-extension-fix-build-fix.patch
Folded into local_t-powerpc-extension.patch
-linux-kernel-markers-kconfig-menus-fix.patch
-linux-kernel-markers-kconfig-menus-fix-2.patch
-linux-kernel-markers-kconfig-menus-fix-3.patch
-linux-kernel-markers-kconfig-menus-fix-4.patch
-linux-kernel-markers-kconfig-menus-fix-5.patch
Folded into linux-kernel-markers-kconfig-menus.patch
-linux-kernel-markers-architecture-independant-code-license-fix.patch
-linux-kernel-markers-architecture-independant-code-flags.patch
Folded into linux-kernel-markers-architecture-independant-code.patch
-linux-kernel-markers-powerpc-optimization-flags.patch
Folded into linux-kernel-markers-powerpc-optimization.patch
-linux-kernel-markers-i386-optimization-fix.patch
-linux-kernel-markers-i386-optimization-export-fix.patch
-linux-kernel-markers-i386-optimization-flags.patch
Folded into linux-kernel-markers-i386-optimization.patch
-linux-kernel-markers-non-optimized-architures-fallback-flags.patch
Folded into linux-kernel-markers-non-optimized-architectures.patch
-linux-kernel-markers-documentation-fix.patch
-linux-kernel-markers-documentation-update-adds-context.patch
-linux-kernel-markers-documentation-update-markerh.patch
-linux-kernel-markers-documentation-update-flags.patch
Folded into linux-kernel-markers-documentation.patch
-readahead-kconfig-options-fix.patch
Folded into readahead-kconfig-options.patch
-readahead-events-accounting-make-readahead_debug_level-static.patch
Folded into readahead-events-accounting.patch
-readahead-sysctl-parameters-use-ctl_unnumbered.patch
-readahead-sysctl-parameters-fix.patch
-readahead-sysctl-parameters-set-readahead_hit_rate=1.patch
Folded into readahead-sysctl-parameters.patch
-readahead-min-max-sizes-remove-get_readahead_bounds.patch
-readahead-min-max-sizes-increase-vm_min_readahead-to-32kb.patch
Folded into readahead-min-max-sizes.patch
-readahead-state-based-method-aging-accounting-vs-zvc-changes.patch
Folded into readahead-state-based-method-aging-accounting.patch
-readahead-state-based-method-prevent-tiny-size.patch
-readahead-state-based-method-move-readahead_ratio-out-of-compute_thrashing_threshold.patch
Folded into readahead-state-based-method.patch
-readahead-context-based-method-locking-fix.patch
-readahead-context-based-method-locking-fix-2.patch
-readahead-context-based-method-update-ra_min.patch
-readahead-context-based-method-remove-readahead_ratio.patch
Folded into readahead-context-based-method.patch
-readahead-initial-method-user-recommended-size-rename-to-read_ahead_initial_kb.patch
Folded into readahead-initial-method-user-recommended-size.patch
-readahead-thrashing-recovery-method-fix.patch
Folded into readahead-thrashing-recovery-method.patch
-readahead-call-scheme-ifdef-fix.patch
-readahead-call-scheme-build-fix.patch
-readahead-call-scheme-remove-get_readahead_bounds.patch
-readahead-call-scheme-fix-thrashed-unaligned-read.patch
Folded into readahead-call-scheme.patch
-readahead-laptop-mode-fix.patch
Folded into readahead-laptop-mode.patch
-readahead-nfsd-case-fix.patch
-readahead-nfsd-case-fix-uninitialized-ra_min-ra_max.patch
-readahead-nfsd-case-remove-ra_min.patch
-readahead-turn-on-by-default.patch
Folded into readahead-nfsd-case.patch
-reiser4-sb_sync_inodes-fix.patch
Folded into reiser4-sb_sync_inodes.patch
-reiser4-export-remove_from_page_cache-fix.patch
Folded into reiser4-export-remove_from_page_cache.patch
-reiser4-configh.patch
-resier4-add-include-linux-freezerh-and-move-definitions-from.patch
-reiser4-reiser4_drop_page-dont-call-remove_from_page_cache.patch
-make-kmem_cache_destroy-return-void-reiser4.patch
-reiser4-hardirq-include-fix.patch
-reiser4-fix-trivial-tyops-which-were-hard-to-hit.patch
-reiser4-run-truncate_inode_pages-in-reiser4_delete_inode.patch
-reiser4-bug-fixes.patch
-reiser4-fix-gcc-ws-compains.patch
-fs-reiser4-possible-cleanups.patch
-reiser4-get_sb_dev-fix.patch
-reiser4-vs-zoned-allocator.patch
-inode_diet-replace-inodeugeneric_ip-with-inodei_private-reiser4.patch
-inode-diet-eliminate-i_blksize-and-use-a-per-superblock-default-reiser4.patch
-reiser4-vs-streamline-generic_file_-interfaces-and-filemap.patch
-reiser4-vs-streamline-generic_file_-interfaces-and-filemap-fix.patch
-reiser4-rename-generic_sounding_globalspatch.patch
-reiser4-get-rid-of-semaphores-wherever-it-is-possible.patch
-reiser4-decribe-new-atom-locking-and-nested-atom-locks-to-lock-validator.patch
-reiser4-use-generic-file-read.patch
-reiser4-use-generic-file-read-fix-readpages-unix-file.patch
-reiser4-simplify-reading-of-partially-converted-files.patch
-reiser4-use-page_offset.patch
-reiser4-use-reiser4_gfp_mask_get-in-reiser4-inode-allocation.patch
-reiser4-re-add-page_count-check-to-reiser4_releasepage.patch
-reiser4-restore-fibmap-ioctl-support-for-packed-files.patch
-reiser4-possible-cleanups-2.patch
-reiser4-format-subversion-numbers-heir-set-and-file-conversion.patch
-reiser4-format-subversion-numbers-heir-set-and-file-conversion-fix-readpages-cryptcompress.patch
-reiser4-cleanups-in-lzo-compression-library.patch
-reiser4-get-rid-of-deprecated-crypto-api.patch
-reiser4-get-rid-of-deprecated-crypto-api-build-fix.patch
-reiser4-fix-missed-unlock-and-exit_context.patch
-reiser4-use-list_head-instead-of-struct-blocknr.patch
-reiser4-use-list_empty-instead-of-list_empty_careful-for.patch
-reiser4-update-comments-fix-write-and-truncate-cryptcompress.patch
-#
-reiser4-temp-fix.patch
-reiser4-fix-write_extent-1.patch
-fs-reiser4-possible-cleanups-2.patch
-fs-reiser4-more-possible-cleanups.patch
-reiser4-use-null-for-pointers.patch
-reiser4-kmem_cache_t-removal.patch
-reiser4-test_clear_page_dirty.patch
-reiser4-fix-readpage_cryptcompress.patch
-reiser4-improve-estimation-for-number-of-nodes-occupied.patch
-reiser4-drop-check_cryptcompress.patch
-reiser4-drop-unused-semaphores.patch
-reiser4-use-dynamic-lattice-for-adaptive-compression.patch
-reiser4-fix-freeze-and-corruption.patch
-reiser4-vs-git-block.patch
-reiser4-vs-git-block-2.patch
-reiser4-vs-git-block3.patch
Folded into reiser4.patch
-ps3fb-thread-updates-update.patch
-ps3fb-thread-updates-2.patch
-ps3fb-thread-updates-42.patch
Folded into ps3fb-thread-updates.patch
-fbdev-display-class-update.patch
Folded into fbdev-display-class.patch
+fbdev-display-class-fix.patch
Fix it
+fbdev-mm-deferred-io-support-fix.patch
+fbdev-mm-deferred-io-support-fix-2.patch
Folded into fbdev-mm-deferred-io-support.patch
+tgafb-accelerated-code.patch
fbdev update
-statistics-infrastructure-make-printk_clock-a-generic-kernel-wide-nsec-resolution-ia64-fix.patch
Folded into statistics-infrastructure-make-printk_clock-a-generic-kernel-wide-nsec-resolution.patch
-statistics-infrastructure-fix-buffer-overflow-in-histogram-with-linear.patch
-statistics-infrastructure-fix-buffer-overflow-in-histogram-with-linear-tidy.patch
-statistics-infrastructure-adapt-output-format-of-utilisation-indicator.patch
-statistics-use-the-enhanced-percpu-interface.patch
-statistics-replace-inode-ugeneric_ip-with-i_private.patch
Folded into statistics-infrastructure.patch
-zfcp-gather-hba-specific-latencies-in-statistics.patch
Folded into statistics-infrastructure-exploitation-zfcp.patch
-integrity-service-api-and-dummy-provider-cleanup-use-of-configh.patch
-integrity-service-api-and-dummy-provider-compilation-warning-fix.patch
-integrity-service-api-and-dummy-provider-fix.patch
Folded into integrity-service-api-and-dummy-provider.patch
-slim-main-patch-socket_post_create-hook-return-code.patch
-slim-main-patch-misc-cleanups-requested-at-inclusion-time.patch
-slim-main-patch-handle-failure-to-register.patch
-slim-main-patch-fix-bug-with-mm_users-usage.patch
-slim-main-patch-security-slim-slm_mainc-make-2-functions-static.patch
-slim-main-include-fix.patch
Folded into slim-main-patch.patch
-slim-secfs-patch-slim-correct-use-of-snprintf.patch
-slim-secfs-patch-cleanup-use-of-configh.patch
Folded into slim-secfs-patch.patch
-slim-make-and-config-stuff-makefile-fix.patch
Folded into slim-make-and-config-stuff.patch
-slim-debug-output-slm_set_taskperm-remove-horrible-error-handling-code.patch
-slim-fix-security-issue-with-the-task_post_setuid-hook.patch
-slim-secfs-inode-i_private-build-fix.patch
-fdtable-make-fdarray-and-fdsets-equal-in-size-slim.patch
-panic-on-slim-selinux.patch
Folded into slim-debug-output.patch
-mutex-subsystem-synchro-test-module-fix.patch
Folded into mutex-subsystem-synchro-test-module.patch
-profile_likely-export-do_check_likely.patch
-profile-likely-unlikely-macros_remove-likely-profiling-int-cast.patch
-profile-likely-unlikely-macros-x86_64-fix.patch
Folded into profile-likely-unlikely-macros.patch
-lockdep-show-held-locks-when-showing-a-stackdump-fix.patch
-lockdep-show-held-locks-when-showing-a-stackdump-fix-2.patch
Folded into lockdep-show-held-locks-when-showing-a-stackdump.patch
-add-debugging-aid-for-memory-initialisation-problems-fix.patch
Folded into add-debugging-aid-for-memory-initialisation-problems.patch
+mm-only-free-swap-space-of-reactivated-pages-debug.patch
Debug swap management
All 799 patches:
ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc2/2.6.20-rc2-mm2/patch-list
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
@ 2007-03-06 9:06 ` J.A. Magallón
2007-03-06 9:15 ` 2.6.21-rc2-mm2 Andrew Morton
2007-03-06 11:14 ` 2.6.21-rc2-mm2 Jens Axboe
2007-03-06 10:27 ` 2.6.21-rc2-mm2 KAMEZAWA Hiroyuki
` (8 subsequent siblings)
9 siblings, 2 replies; 48+ messages in thread
From: J.A. Magallón @ 2007-03-06 9:06 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Tue, 6 Mar 2007 00:44:08 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> Temporarily at
>
> http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
>
Does this include a fix for the NFS problem ?
BTW, I have in my kernel a patch like this below, isn't it needed ?
Original thread:
http://marc.theaimsgroup.com/?l=linux-kernel&m=117189051227292&w=2
--- a/block/ll_rw_blk.c
+++ b/block/ll_rw_blk.c
@@ -2919,14 +2919,14 @@ static int __make_request(request_queue_
*/
blk_queue_bounce(q, &bio);
+ spin_lock_irq(q->queue_lock);
/*
* Check if we can merge with the plugged list before grabbing
* any locks.
*/
if (!check_plug_merge(q, ioc, bio))
- goto out;
+ goto out_unlock;
- spin_lock_irq(q->queue_lock);
el_ret = elv_merge(q, &req, bio);
if (el_ret == ELEVATOR_BACK_MERGE) {
if (bio_attempt_back_merge(q, req, bio)) {
@@ -2984,7 +2984,6 @@ out_unlock:
list_add_tail(&req->queuelist, &ioc->plugged_list);
}
-out:
return 0;
end_io_eopnotsupp:
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2007.1 (Cooker) for i586
Linux 2.6.20-jam01 (gcc 4.1.2 20070302 (prerelease) (4.1.2-1mdv2007.1)) #2 SMP PREEMPT
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 9:06 ` 2.6.21-rc2-mm2 J.A. Magallón
@ 2007-03-06 9:15 ` Andrew Morton
2007-03-06 9:38 ` 2.6.21-rc2-mm2 J.A. Magallón
2007-03-06 11:14 ` 2.6.21-rc2-mm2 Jens Axboe
1 sibling, 1 reply; 48+ messages in thread
From: Andrew Morton @ 2007-03-06 9:15 UTC (permalink / raw)
To: J.A. =?ISO-8859-1?B?TWFnYWxs824i?= <jamagallon@ono.com>
Cc: linux-kernel
On Tue, 6 Mar 2007 10:06:23 +0100 "J.A. Magallón" <jamagallon@ono.com> wrote:
> On Tue, 6 Mar 2007 00:44:08 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> >
> > Temporarily at
> >
> > http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
> >
>
> Does this include a fix for the NFS problem ?
Which NFS problem?
> BTW, I have in my kernel a patch like this below, isn't it needed ?
> Original thread:
>
> http://marc.theaimsgroup.com/?l=linux-kernel&m=117189051227292&w=2
That patch caused additional failures. But I tossed out the git-block tree,
so that problem should no longer be there.
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 9:15 ` 2.6.21-rc2-mm2 Andrew Morton
@ 2007-03-06 9:38 ` J.A. Magallón
2007-03-06 9:42 ` 2.6.21-rc2-mm2 Andrew Morton
0 siblings, 1 reply; 48+ messages in thread
From: J.A. Magallón @ 2007-03-06 9:38 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Tue, 6 Mar 2007 01:15:24 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
> On Tue, 6 Mar 2007 10:06:23 +0100 "J.A. Magallón" <jamagallon@ono.com> wrote:
>
> > On Tue, 6 Mar 2007 00:44:08 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > >
> > > Temporarily at
> > >
> > > http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
> > >
> >
> > Does this include a fix for the NFS problem ?
>
> Which NFS problem?
>
http://marc.theaimsgroup.com/?l=linux-kernel&m=117305359825926&w=2
> > BTW, I have in my kernel a patch like this below, isn't it needed ?
> > Original thread:
> >
> > http://marc.theaimsgroup.com/?l=linux-kernel&m=117189051227292&w=2
>
> That patch caused additional failures. But I tossed out the git-block tree,
> so that problem should no longer be there.
>
OK, thanks.
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2007.1 (Cooker) for i586
Linux 2.6.20-jam01 (gcc 4.1.2 20070302 (prerelease) (4.1.2-1mdv2007.1)) #2 SMP PREEMPT
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 9:38 ` 2.6.21-rc2-mm2 J.A. Magallón
@ 2007-03-06 9:42 ` Andrew Morton
2007-03-06 9:44 ` 2.6.21-rc2-mm2 J.A. Magallón
0 siblings, 1 reply; 48+ messages in thread
From: Andrew Morton @ 2007-03-06 9:42 UTC (permalink / raw)
To: J.A. =?ISO-8859-1?B?TWFnYWxs824i?= <jamagallon@ono.com>
Cc: linux-kernel
On Tue, 6 Mar 2007 10:38:23 +0100 "J.A. Magallón" <jamagallon@ono.com> wrote:
> On Tue, 6 Mar 2007 01:15:24 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> > On Tue, 6 Mar 2007 10:06:23 +0100 "J.A. Magallón" <jamagallon@ono.com> wrote:
> >
> > > On Tue, 6 Mar 2007 00:44:08 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
> > >
> > > >
> > > > Temporarily at
> > > >
> > > > http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
> > > >
> > >
> > > Does this include a fix for the NFS problem ?
> >
> > Which NFS problem?
> >
>
> http://marc.theaimsgroup.com/?l=linux-kernel&m=117305359825926&w=2
yup, that got fixed.
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 9:42 ` 2.6.21-rc2-mm2 Andrew Morton
@ 2007-03-06 9:44 ` J.A. Magallón
0 siblings, 0 replies; 48+ messages in thread
From: J.A. Magallón @ 2007-03-06 9:44 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Tue, 6 Mar 2007 01:42:40 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
> On Tue, 6 Mar 2007 10:38:23 +0100 "J.A. Magallón" <jamagallon@ono.com> wrote:
>
> > On Tue, 6 Mar 2007 01:15:24 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > > On Tue, 6 Mar 2007 10:06:23 +0100 "J.A. Magallón" <jamagallon@ono.com> wrote:
> > >
> > > > On Tue, 6 Mar 2007 00:44:08 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
> > > >
> > > > >
> > > > > Temporarily at
> > > > >
> > > > > http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
> > > > >
> > > >
> > > > Does this include a fix for the NFS problem ?
> > >
> > > Which NFS problem?
> > >
> >
> > http://marc.theaimsgroup.com/?l=linux-kernel&m=117305359825926&w=2
>
> yup, that got fixed.
Thanks, I will build it tonite...
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2007.1 (Cooker) for i586
Linux 2.6.20-jam01 (gcc 4.1.2 20070302 (prerelease) (4.1.2-1mdv2007.1)) #2 SMP PREEMPT
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
2007-03-06 9:06 ` 2.6.21-rc2-mm2 J.A. Magallón
@ 2007-03-06 10:27 ` KAMEZAWA Hiroyuki
2007-03-06 11:09 ` 2.6.21-rc2-mm2 Andrew Morton
2007-03-08 8:41 ` 2.6.21-rc2-mm2 Magnus Damm
2007-03-06 11:58 ` 2.6.21-rc2-mm2 Con Kolivas
` (7 subsequent siblings)
9 siblings, 2 replies; 48+ messages in thread
From: KAMEZAWA Hiroyuki @ 2007-03-06 10:27 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 3483 bytes --]
Following panic ouccurred (always) on ia64/NUMA(with empty node.)
Bug in here.
==
void move_native_irq(int irq)
{
struct irq_desc *desc = irq_desc + irq;
if (likely(!(desc->status & IRQ_MOVE_PENDING)))
return;
if (unlikely(desc->status & IRQ_DISABLED))
return;
desc->chip->mask(irq); <---------maybe this *mask* is NULL pointer
move_masked_irq(irq);
desc->chip->unmask(irq);
}
==
Is "mask" always valid pointer ?
my .config is attached
==
Unable to handle kernel NULL pointer dereference (address 0000000000000000)
yum-updatesd[3461]: Oops 11012296146944 [1]
Modules linked in: autofs4 hidp rfcomm l2cap bluetooth sunrpc ipv6 vfat fat dm_mirror dm_mod button parport_pc lp parport sg tg3 e100 shpchp mii usb_storage lpfc scsi_transport_fc mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
Pid: 3461, CPU 5, comm: yum-updatesd
psr : 0000121008022018 ifs : 8000000000000286 ip : [<a0000001000e02b1>] Not tainted
ip is at move_native_irq+0x91/0x140
unat: 0000000000000000 pfs : 0000000000000205 rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : 00000000005a56a9
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c0270033f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a000000100050430 b6 : a00000021b49d0c0 b7 : a000000100050400
f6 : 1003e0000000000000de0 f7 : 1003e0000000000000060
f8 : 1003e0000000000000025 f9 : 1003e00000000000022e0
f10 : 1003e0000000000000060 f11 : 1003e000000000000005d
r1 : a000000100d8d230 r2 : a0000001009f8c30 r3 : 0000000000005580
r8 : a000000100b8e178 r9 : 00000000000000ab r10 : 0000000000000039
r11 : 0000000000200000 r12 : e00001404b6f7e30 r13 : e00001404b6f0000
r14 : 0000000000200000 r15 : a0000001009f8c00 r16 : a000000100b5b160
r17 : 00000000dead4ead r18 : a0000001009f8c4c r19 : 0000000000000000
r20 : a000000100b5b110 r21 : a000000100b5b140 r22 : a000000100b5b110
r23 : 0050200500000874 r24 : a000000100ba98c0 r25 : a00000021b53d768
r26 : e00000018007e030 r27 : a000000100786238 r28 : e000000040004ae0
r29 : a0000001009f8c50 r30 : 0000000000000005 r31 : a0000001009f8c58
Call Trace:
[<a000000100013e20>] show_stack+0x40/0xa0
sp=e00001404b6f79c0 bsp=e00001404b6f1030
[<a0000001000147e0>] show_regs+0x840/0x880
sp=e00001404b6f7b90 bsp=e00001404b6f0fd0
[<a000000100037de0>] die+0x1c0/0x2a0
sp=e00001404b6f7b90 bsp=e00001404b6f0f88
[<a000000100647630>] ia64_do_page_fault+0x8d0/0xa00
sp=e00001404b6f7bb0 bsp=e00001404b6f0f38
[<a00000010000bf80>] ia64_leave_kernel+0x0/0x270
sp=e00001404b6f7c60 bsp=e00001404b6f0f38
[<a0000001000e02b0>] move_native_irq+0x90/0x140
sp=e00001404b6f7e30 bsp=e00001404b6f0f08
[<a000000100050430>] iosapic_end_level_irq+0x30/0xe0
sp=e00001404b6f7e30 bsp=e00001404b6f0ee8
[<a0000001000dac30>] __do_IRQ+0x390/0x3c0
sp=e00001404b6f7e30 bsp=e00001404b6f0ea8
[<a000000100011620>] ia64_handle_irq+0x1e0/0x2e0
sp=e00001404b6f7e30 bsp=e00001404b6f0e78
[<a00000010000bf80>] ia64_leave_kernel+0x0/0x270
sp=e00001404b6f7e30 bsp=e00001404b6f0e78
Kernel panic - not syncing: Aiee, killing interrupt handler!
[-- Attachment #2: myconfig --]
[-- Type: application/octet-stream, Size: 57737 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc2-mm2
# Tue Mar 6 18:33:53 2007
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
CONFIG_SYSFS_DEPRECATED=y
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_RCU_TRACE=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PAGE_GROUP_BY_MOBILITY=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Process debugging support
#
CONFIG_UTRACE=y
CONFIG_PTRACE=y
#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_AUDIT_ARCH=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_PGTABLE_3=y
# CONFIG_PGTABLE_4 is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
CONFIG_IA64_SGI_SN_XP=y
CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=1024
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_SCHED_SMT=y
# CONFIG_PERMIT_BSP_REMOVE is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ADAPTIVE_READAHEAD=y
# CONFIG_DEBUG_READAHEAD is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
# CONFIG_IA32_SUPPORT is not set
CONFIG_IA64_MCA_RECOVERY=m
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
#
# SN Devices
#
CONFIG_SGI_IOC3=m
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
#
# Power management and ACPI
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_NUMA=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_MEMORY=y
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
#
# CPUFreq processor drivers
#
CONFIG_IA64_ACPI_CPUFREQ=m
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
CONFIG_HOTPLUG_PCI_SHPC=m
CONFIG_HOTPLUG_PCI_SGI=m
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set
#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NF_CONNTRACK_ENABLED is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m
#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not set
# CONFIG_NET_DCCPPROBE is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=m
# CONFIG_TIPC_ADVANCED is not set
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
# CONFIG_ATM_MPOA is not set
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_MAC80211 is not set
CONFIG_IEEE80211=m
CONFIG_IEEE80211_DEBUG=y
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
CONFIG_IEEE80211_SOFTMAC_DEBUG=y
CONFIG_WIRELESS_EXT=y
CONFIG_FIB_RULES=y
# CONFIG_CFG80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=4096
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m
#
# Misc devices
#
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
# CONFIG_BLK_DEV_CY82C693 is not set
CONFIG_BLK_DEV_CS5520=y
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
CONFIG_BLK_DEV_IT821X=y
# CONFIG_BLK_DEV_NS87415 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=y
# CONFIG_PDC202XX_BURST is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SGIIOC4=y
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=4
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=0
# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=4
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=0
# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
CONFIG_SCSI_DC395x=m
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FW is not set
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
CONFIG_PHYLIB=m
#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
# CONFIG_BROADCOM_PHY is not set
CONFIG_FIXED_PHY=m
CONFIG_FIXED_MII_10_FDX=y
CONFIG_FIXED_MII_100_FDX=y
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
CONFIG_TULIP_MMIO=y
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_B44=m
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
# CONFIG_SUNDANCE is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
# CONFIG_SC92031 is not set
CONFIG_NET_POCKET=y
# CONFIG_DE600 is not set
# CONFIG_DE620 is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
# CONFIG_CHELSIO_T1_1G is not set
CONFIG_CHELSIO_T1_NAPI=y
# CONFIG_CHELSIO_T3 is not set
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
# CONFIG_NETXEN_NIC is not set
# CONFIG_VIOC is not set
#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMOL=m
CONFIG_3C359=m
# CONFIG_TMS380TR is not set
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y
#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m
#
# Wireless 802.11 Frequency Hopping cards support
#
# CONFIG_PCMCIA_RAYCS is not set
#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS_USB is not set
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
# CONFIG_BCM43XX is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
# CONFIG_RTL818X is not set
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
#
# Wan interfaces
#
# CONFIG_WAN is not set
#
# ATM drivers
#
# CONFIG_ATM_DUMMY is not set
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
# CONFIG_ATM_ZATM is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
# CONFIG_ATM_IA is not set
CONFIG_ATM_FORE200E_MAYBE=m
# CONFIG_ATM_FORE200E_PCA is not set
CONFIG_ATM_HE=m
# CONFIG_ATM_HE_USE_SUNI is not set
CONFIG_FDDI=y
# CONFIG_DEFXX is not set
# CONFIG_SKFP is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
# CONFIG_PPP_BSDCOMP is not set
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
CONFIG_NET_FC=y
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
CONFIG_ISDN=m
#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
# CONFIG_ISDN_PPP_BSDCOMP is not set
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
CONFIG_HISAX_NO_SENDCOMPLETE=y
CONFIG_HISAX_NO_LLC=y
CONFIG_HISAX_NO_KEYPAD=y
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
# CONFIG_HISAX_HFCUSB is not set
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y
#
# Active cards
#
#
# Siemens Gigaset
#
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
# CONFIG_GIGASET_M101 is not set
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#
# CONFIG_CAPI_EICON is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
# CONFIG_TOUCHSCREEN_UCB1400 is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_MOXA_SMARTIO_NEW is not set
# CONFIG_ISI is not set
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=16
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
# CONFIG_SERIAL_8250_DONT_TEST_BUG_TXEN is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_SERIAL_SGI_IOC4=m
CONFIG_SERIAL_SGI_IOC3=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
CONFIG_LP_CONSOLE=y
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set
#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_I8XX_TCO=m
# CONFIG_ITCO_WDT is not set
#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y
#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
CONFIG_DTLK=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_I460=y
CONFIG_AGP_HP_ZX1=y
CONFIG_AGP_SGI_TIOCA=y
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS_CS is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=8192
# CONFIG_HPET is not set
CONFIG_HANGCHECK_TIMER=m
CONFIG_MMTIMER=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
# CONFIG_I2C_PASEMI is not set
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
CONFIG_I2C_STUB=m
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
CONFIG_I2C_VOODOO3=m
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
CONFIG_W1=m
CONFIG_W1_CON=y
#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
CONFIG_W1_SLAVE_DS2433_CRC=y
#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
# CONFIG_SENSORS_ADM1029 is not set
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
# CONFIG_SENSORS_PC87427 is not set
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
# CONFIG_SENSORS_VT1211 is not set
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
# CONFIG_SENSORS_W83793 is not set
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB=m
CONFIG_SSB_PCIHOST=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE=y
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_SAA6588=m
# CONFIG_VIDEO_BWQCAM is not set
# CONFIG_VIDEO_CQCAM is not set
# CONFIG_VIDEO_W9966 is not set
# CONFIG_VIDEO_CPIA is not set
CONFIG_VIDEO_CPIA2=m
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
# CONFIG_VIDEO_PVRUSB2_29XXX is not set
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_USBVISION is not set
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
CONFIG_USB_W9968CF=m
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set
# CONFIG_USB_ZR364XX is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
CONFIG_USB_DSBR=m
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=m
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frambuffer hardware drivers
#
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
CONFIG_FB_SAVAGE_ACCEL=y
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_KORG1212_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MAESTRO3_FIRMWARE_IN_KERNEL=y
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_YMFPCI_FIRMWARE_IN_KERNEL=y
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
# CONFIG_USB_SSB_HCD is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_TOUCHSCREEN_DMC_TSC10=y
# CONFIG_USB_YEALINK is not set
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m
# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
# CONFIG_USB_KC2190 is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
# CONFIG_USB_ADUTUX is not set
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
CONFIG_USB_IDMOUSE=m
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
CONFIG_USB_TEST=m
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_TIFM_SD is not set
#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
#
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_IPATH=m
# CONFIG_INFINIBAND_AMSO1100 is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_RS5C372=m
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
CONFIG_RTC_DRV_V3020=m
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set
#
# Virtualization
#
#
# Userspace I/O
#
# CONFIG_UIO is not set
# CONFIG_MSPEC is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
CONFIG_JBD_DEBUG=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m
#
# Layered filesystems
#
# CONFIG_ECRYPT_FS is not set
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
CONFIG_VXFS_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_9P_FS=m
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_TCP=y
# CONFIG_DLM_SCTP is not set
CONFIG_DLM_DEBUG=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
# CONFIG_CRC_ITU_T is not set
CONFIG_LIBCRC32C=m
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
CONFIG_KPROBES=y
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_SLAB=y
CONFIG_DEBUG_SLAB_LEAK=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_INTEGRITY is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT=y
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 10:27 ` 2.6.21-rc2-mm2 KAMEZAWA Hiroyuki
@ 2007-03-06 11:09 ` Andrew Morton
2007-03-06 11:35 ` 2.6.21-rc2-mm2 KAMEZAWA Hiroyuki
2007-03-08 8:41 ` 2.6.21-rc2-mm2 Magnus Damm
1 sibling, 1 reply; 48+ messages in thread
From: Andrew Morton @ 2007-03-06 11:09 UTC (permalink / raw)
To: KAMEZAWA Hiroyuki; +Cc: linux-kernel
On Tue, 6 Mar 2007 19:27:18 +0900 KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
>
> Following panic ouccurred (always) on ia64/NUMA(with empty node.)
>
> Bug in here.
> ==
> void move_native_irq(int irq)
> {
> struct irq_desc *desc = irq_desc + irq;
>
> if (likely(!(desc->status & IRQ_MOVE_PENDING)))
> return;
>
> if (unlikely(desc->status & IRQ_DISABLED))
> return;
>
> desc->chip->mask(irq); <---------maybe this *mask* is NULL pointer
> move_masked_irq(irq);
> desc->chip->unmask(irq);
> }
> ==
>
> Is "mask" always valid pointer ?
I can only find two `struct irq_chip's in arch/ia64 and they both have a
.mask. And a .unmask. So perhaps that is a misreading of what oopsed.
There are no changes in kernel/irq/ in -mm. Are you sure mainline doesn't
do this too?
Anyway, can you please take a closer look at exactly what pointer it is
oopsing on?
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 9:06 ` 2.6.21-rc2-mm2 J.A. Magallón
2007-03-06 9:15 ` 2.6.21-rc2-mm2 Andrew Morton
@ 2007-03-06 11:14 ` Jens Axboe
1 sibling, 0 replies; 48+ messages in thread
From: Jens Axboe @ 2007-03-06 11:14 UTC (permalink / raw)
To: J.A. Magallón; +Cc: Andrew Morton, linux-kernel
On Tue, Mar 06 2007, J.A. Magallón wrote:
> On Tue, 6 Mar 2007 00:44:08 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> >
> > Temporarily at
> >
> > http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
> >
>
> Does this include a fix for the NFS problem ?
>
> BTW, I have in my kernel a patch like this below, isn't it needed ?
> Original thread:
>
> http://marc.theaimsgroup.com/?l=linux-kernel&m=117189051227292&w=2
>
> --- a/block/ll_rw_blk.c
> +++ b/block/ll_rw_blk.c
> @@ -2919,14 +2919,14 @@ static int __make_request(request_queue_
> */
> blk_queue_bounce(q, &bio);
>
> + spin_lock_irq(q->queue_lock);
> /*
> * Check if we can merge with the plugged list before grabbing
> * any locks.
> */
> if (!check_plug_merge(q, ioc, bio))
> - goto out;
> + goto out_unlock;
>
> - spin_lock_irq(q->queue_lock);
> el_ret = elv_merge(q, &req, bio);
> if (el_ret == ELEVATOR_BACK_MERGE) {
> if (bio_attempt_back_merge(q, req, bio)) {
> @@ -2984,7 +2984,6 @@ out_unlock:
> list_add_tail(&req->queuelist, &ioc->plugged_list);
> }
>
> -out:
> return 0;
>
> end_io_eopnotsupp:
No it's not, plus andrew didn't include git-block in this release so
you'd have a hard time even applying it. The above patch would also
eliminate 50% of the win of per-process plugging, if you go and grab the
queue lock anyway.
--
Jens Axboe
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 11:09 ` 2.6.21-rc2-mm2 Andrew Morton
@ 2007-03-06 11:35 ` KAMEZAWA Hiroyuki
2007-03-07 6:23 ` [BUGFIX][PATCH] fix NULL pointer in ia64/irq_chip-mask/unmask function KAMEZAWA Hiroyuki
0 siblings, 1 reply; 48+ messages in thread
From: KAMEZAWA Hiroyuki @ 2007-03-06 11:35 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Tue, 6 Mar 2007 03:09:27 -0800
Andrew Morton <akpm@linux-foundation.org> wrote:
> > ==
> >
> > Is "mask" always valid pointer ?
>
> I can only find two `struct irq_chip's in arch/ia64 and they both have a
> .mask. And a .unmask. So perhaps that is a misreading of what oopsed.
>
> There are no changes in kernel/irq/ in -mm. Are you sure mainline doesn't
> do this too?
>
> Anyway, can you please take a closer look at exactly what pointer it is
> oopsing on?
>
Okay, I'll try -rc2 and look into more, tomorrow.
-Kame
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
2007-03-06 9:06 ` 2.6.21-rc2-mm2 J.A. Magallón
2007-03-06 10:27 ` 2.6.21-rc2-mm2 KAMEZAWA Hiroyuki
@ 2007-03-06 11:58 ` Con Kolivas
2007-03-06 12:52 ` 2.6.21-rc2-mm2 Thomas Gleixner
2007-03-06 15:46 ` 2.6.21-rc2-mm2 J.A. Magallón
` (6 subsequent siblings)
9 siblings, 1 reply; 48+ messages in thread
From: Con Kolivas @ 2007-03-06 11:58 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, tglx
[-- Attachment #1: Type: text/plain, Size: 8684 bytes --]
(tglx cc'ed as he may know something about this - sorry if it's inappropriate)
On Tuesday 06 March 2007 19:44, Andrew Morton wrote:
> Temporarily at
>
> http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
>
> Will appear later at
>
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc2/2.
>6.20-rc2-mm2/
qemu doesn't like it with the config from my core2duo (attached below).
qemu-system-x86_64 -kernel
arch/x86_64/boot/bzImage -hda ../temp/linux-0.2.img -append
root=/dev/hda -smp 2 -nographic -serial stdio -append console=ttyS0
Could not configure '/dev/rtc' to have a 1024 Hz timer. This is not a fatal
error, but for better emulation accuracy either use a 2.6 host Linux kernel or
type 'echo 1024 > /proc/sys/dev/rtc/max-user-freq' as root.
(qemu) Linux version 2.6.21-rc2-mm2 (con@duo.kolivas.org) (gcc version 4.1.2
20061115 (prerelease) (Debian 4.1.1-21)) #2 SMP PREEMPT Tue Mar 6 22:42:56
EST 2007
Command line: console=ttyS0
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000008000000 (ACPI data)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
end_pfn_map = 1048576
DMI not present or invalid.
ACPI: RSDP 000FA6D0, 0014 (r0 QEMU )
ACPI: RSDT 07FF0000, 002C (r0 QEMU QEMURSDT 1 QEMU 1)
ACPI: FACP 07FF002C, 0074 (r0 QEMU QEMUFACP 1 QEMU 1)
ACPI: DSDT 07FF0100, 0832 (r1 BXPC BXDSDT 1 INTL 20060912)
ACPI: FACS 07FF00C0, 0040
ACPI: APIC 07FF0938, 0048 (r0 QEMU QEMUAPIC 1 QEMU 1)
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 32752
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e8000
Nosave address range: 00000000000e8000 - 0000000000100000
Allocating PCI resources starting at 10000000 (gap: 8000000:f7fc0000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 33792 bytes of per cpu data
Built 1 zonelists. Total pages: 31110
Kernel command line: console=ttyS0
Initializing CPU#0
PID hash table entries: 512 (order: 9, 4096 bytes)
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 2461.549 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Checking aperture...
Memory: 123928k/131008k available (2332k kernel code, 6532k reserved, 1359k
data, 216k init)
Calibrating delay using timer specific routine.. 5715.81 BogoMIPS
(lpj=2857906)
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
do_IRQ: 0.48 No irq handler for vector
do_IRQ: 0.48 No irq handler for vector
do_IRQ: 0.48 No irq handler for vector
do_IRQ: 0.48 No irq handler for vector
do_IRQ: 0.48 No irq handler for vector
do_IRQ: 0.48 No irq handler for vector
do_IRQ: 0.48 No irq handler for vector
do_IRQ: 0.48 No irq handler for vector
do_IRQ: 0.48 No irq handler for vector
do_IRQ: 0.48 No irq handler for vector
Using local APIC timer interrupts.
result 62504298
Detected 62.504 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 11970.64 BogoMIPS
(lpj=5985322)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
QEMU Virtual CPU version 0.9.0 stepping 03
Brought up 2 CPUs
migration_cost=1939
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
0000:00:01.1: cannot adjust BAR0 (not I/O)
0000:00:01.1: cannot adjust BAR1 (not I/O)
0000:00:01.1: cannot adjust BAR2 (not I/O)
0000:00:01.1: cannot adjust BAR3 (not I/O)
PCI quirk: region b000-b03f claimed by PIIX4 ACPI
PCI quirk: region b100-b10f claimed by PIIX4 SMB
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 6 devices
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI-GART: No AMD northbridge found.
Unable to handle kernel NULL pointer dereference at 0000000000000830 RIP:
[<ffffffff8018401c>] do_timer+0x301/0x419
PGD 0
Oops: 0000 [1] PREEMPT SMP
last sysfs file:
CPU 0
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.21-rc2-mm2 #2
RIP: 0010:[<ffffffff8018401c>] [<ffffffff8018401c>] do_timer+0x301/0x419
RSP: 0000:ffffffff804efda8 EFLAGS: 00000097
RAX: 0000000045ed53ec RBX: 0000000000000800 RCX: 0000000000000008
RDX: 000000000f41a777 RSI: 00000000000f4240 RDI: ffffffff8046c1c0
RBP: 000000032d8863b3 R08: 0000000000000004 R09: ffffffff804e7700
R10: ffff810080cdffc0 R11: 7fffffffffffffff R12: ffffffff8046c3c0
R13: 0000000000000000 R14: 0000000000000001 R15: ffffffffffffffff
FS: 0000000000000000(0000) GS:ffffffff8049c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000830 CR3: 0000000000101000 CR4: 00000000000006e0
Process swapper (pid: 1, threadinfo ffff810001450000, task ffff81000144f420)
Stack: ffffffff804efef4 0000000000000001 ffffffff804efee8 ffffffff80465e20
0000000000000000 0000000000000000 0000000000000000 0000000000000000
ffff810002602288 ffffffff801638fc 0000000000000080 0000000000000100
Call Trace:
<IRQ> [<ffffffff801638fc>] main_timer_handler+0x24/0x1de
[<ffffffff80163ac8>] timer_interrupt+0x12/0x27
[<ffffffff801104c5>] handle_IRQ_event+0x25/0x53
[<ffffffff8019965c>] handle_edge_irq+0xe5/0x129
[<ffffffff80162b4e>] do_IRQ+0x6c/0xd3
[<ffffffff8017be24>] run_rebalance_domains+0x13d/0x3fd
[<ffffffff80156e31>] ret_from_intr+0x0/0xa
[<ffffffff80111839>] __do_softirq+0x3b/0x93
[<ffffffff80157adc>] call_softirq+0x1c/0x28
[<ffffffff80162a91>] do_softirq+0x2c/0x7d
[<ffffffff80180fe0>] irq_exit+0x3f/0x50
[<ffffffff8016c48b>] smp_apic_timer_interrupt+0x49/0x5c
[<ffffffff80160d16>] default_idle+0x0/0x3d
[<ffffffff80157586>] apic_timer_interrupt+0x66/0x70
<EOI> [<ffffffff8010d03b>] permission+0x4e/0xb3
[<ffffffff80132d52>] __lookup_hash+0x28/0x126
[<ffffffff801b4246>] lookup_one_len_nd+0x62/0x70
[<ffffffff801d63f5>] create_dir+0x46/0x1e3
[<ffffffff801d65e9>] sysfs_create_dir+0x57/0x75
[<ffffffff80220201>] kobject_shadow_add+0xe9/0x19d
[<ffffffff802203e9>] kobject_register+0x20/0x39
[<ffffffff8028d4dc>] bus_add_driver+0x59/0x19a
[<ffffffff804b55fd>] init+0x142/0x23f
[<ffffffff8015b1e0>] preempt_schedule+0x4f/0x7f
[<ffffffff80125438>] schedule_tail+0x38/0x98
[<ffffffff80157768>] child_rip+0xa/0x12
[<ffffffff8024493d>] acpi_ds_init_one_object+0x0/0x7c
[<ffffffff804b54bb>] init+0x0/0x23f
[<ffffffff8015775e>] child_rip+0x0/0x12
Code: 8b 53 30 48 c7 c7 5c e6 3f 80 8b 4b 34 48 89 6b 48 48 c7 43
RIP [<ffffffff8018401c>] do_timer+0x301/0x419
RSP <ffffffff804efda8>
CR2: 0000000000000830
Kernel panic - not syncing: Aiee, killing interrupt handler!
Terminated
---
list *do_timer+0x301
0xffffffff8018401c is in do_timer
(/home/con/kernel/linux-2.6.21-rc2-mm2/include/linux/clocksource.h:186).
181 u64 tmp;
182
183 /* XXX - All of this could use a whole lot of optimization */
184 tmp = length_nsec;
185 tmp <<= c->shift;
186 tmp += c->mult/2;
187 do_div(tmp, c->mult);
188
189 c->cycle_interval = (cycle_t)tmp;
190 if (c->cycle_interval == 0)
--
-ck
[-- Attachment #2: config --]
[-- Type: text/plain, Size: 41855 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-rc2-mm2
# Tue Mar 6 22:29:24 2007
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_CLASSIC_RCU is not set
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
CONFIG_PAGE_GROUP_BY_MOBILITY=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Process debugging support
#
CONFIG_UTRACE=y
CONFIG_PTRACE=y
#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_ADAPTIVE_READAHEAD=y
CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_REORDER=y
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y
#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
# CONFIG_SOFTWARE_SUSPEND is not set
CONFIG_SUSPEND_SMP=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_PROCFS=y
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_ACPI_CPUFREQ=m
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
#
# CPU idle PM support
#
CONFIG_CPU_IDLE=y
#
# Governors
#
CONFIG_CPU_IDLE_GOV_LADDER=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_DOMAINS is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
#
# Networking
#
CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
# CONFIG_NET_SCH_CLK_JIFFIES is not set
CONFIG_NET_SCH_CLK_GETTIMEOFDAY=y
# CONFIG_NET_SCH_CLK_CPU is not set
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
# CONFIG_CLS_U32_MARK is not set
CONFIG_NET_CLS_RSVP=m
# CONFIG_NET_CLS_RSVP6 is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
# CONFIG_NET_CLS_POLICE is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_ESTIMATOR=y
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_CFG80211 is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
CONFIG_BLK_DEV_JMICRON=m
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDEDMA_IVB=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_INTEL_COMBINED=y
CONFIG_SATA_ACPI=y
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=y
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FW is not set
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set
#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# PHY device support
#
#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set
# CONFIG_B44 is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=y
# CONFIG_R8169_NAPI is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_VIOC is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
# CONFIG_RTL818X is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
# CONFIG_SERIAL_8250_PCI is not set
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PASEMI is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
# CONFIG_VIDEO_V4L1 is not set
# CONFIG_VIDEO_V4L1_COMPAT is not set
CONFIG_VIDEO_V4L2=y
#
# Video Capture Adapters
#
#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
#
# V4L USB devices
#
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ZR364XX is not set
#
# Radio Adapters
#
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_PROGEAR is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
# CONFIG_SND_MTS64 is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
#
# SoC audio support
#
# CONFIG_SND_SOC is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
#
# HID Devices
#
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_GTCO is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set
#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
#
# USB DSL modem support
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_K8 is not set
CONFIG_EDAC_POLL=y
#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
CONFIG_ASYNC_TX_DMA=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set
#
# Virtualization
#
# CONFIG_KVM is not set
#
# Userspace I/O
#
# CONFIG_UIO is not set
#
# Firmware Drivers
#
CONFIG_EDD=y
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
# Layered filesystems
#
# CONFIG_UNION_FS is not set
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
CONFIG_NLS_CODEPAGE_869=m
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
CONFIG_NLS_CODEPAGE_932=m
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
#
# Distributed Lock Manager
#
# CONFIG_DLM is not set
#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set
# CONFIG_MARKERS is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_INTEGRITY is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_CRC_ITU_T is not set
# CONFIG_LIBCRC32C is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 11:58 ` 2.6.21-rc2-mm2 Con Kolivas
@ 2007-03-06 12:52 ` Thomas Gleixner
2007-03-06 13:24 ` 2.6.21-rc2-mm2 Con Kolivas
0 siblings, 1 reply; 48+ messages in thread
From: Thomas Gleixner @ 2007-03-06 12:52 UTC (permalink / raw)
To: Con Kolivas; +Cc: Andrew Morton, linux-kernel, john stultz
On Tue, 2007-03-06 at 22:58 +1100, Con Kolivas wrote:
> (tglx cc'ed as he may know something about this - sorry if it's inappropriate)
John cc'ed as well :)
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc2/2.
> >6.20-rc2-mm2/
>
> qemu doesn't like it with the config from my core2duo (attached below).
>
> qemu-system-x86_64 -kernel
> arch/x86_64/boot/bzImage -hda ../temp/linux-0.2.img -append
> root=/dev/hda -smp 2 -nographic -serial stdio -append console=ttyS0
>
> Could not configure '/dev/rtc' to have a 1024 Hz timer. This is not a fatal
> error, but for better emulation accuracy either use a 2.6 host Linux kernel or
> type 'echo 1024 > /proc/sys/dev/rtc/max-user-freq' as root.
> (qemu) Linux version 2.6.21-rc2-mm2 (con@duo.kolivas.org) (gcc version 4.1.2
> 20061115 (prerelease) (Debian 4.1.1-21)) #2 SMP PREEMPT Tue Mar 6 22:42:56
> EST 2007
> Command line: console=ttyS0
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
> BIOS-e820: 0000000007ff0000 - 0000000008000000 (ACPI data)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
> end_pfn_map = 1048576
> DMI not present or invalid.
> ACPI: RSDP 000FA6D0, 0014 (r0 QEMU )
> ACPI: RSDT 07FF0000, 002C (r0 QEMU QEMURSDT 1 QEMU 1)
> ACPI: FACP 07FF002C, 0074 (r0 QEMU QEMUFACP 1 QEMU 1)
> ACPI: DSDT 07FF0100, 0832 (r1 BXPC BXDSDT 1 INTL 20060912)
> ACPI: FACS 07FF00C0, 0040
> ACPI: APIC 07FF0938, 0048 (r0 QEMU QEMUAPIC 1 QEMU 1)
> Zone PFN ranges:
> DMA 0 -> 4096
> DMA32 4096 -> 1048576
> Normal 1048576 -> 1048576
> Movable zone start PFN for each node
> early_node_map[2] active PFN ranges
> 0: 0 -> 159
> 0: 256 -> 32752
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 (Bootup-CPU)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> Processor #1
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Nosave address range: 000000000009f000 - 00000000000a0000
> Nosave address range: 00000000000a0000 - 00000000000e8000
> Nosave address range: 00000000000e8000 - 0000000000100000
> Allocating PCI resources starting at 10000000 (gap: 8000000:f7fc0000)
> SMP: Allowing 2 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 33792 bytes of per cpu data
> Built 1 zonelists. Total pages: 31110
> Kernel command line: console=ttyS0
> Initializing CPU#0
> PID hash table entries: 512 (order: 9, 4096 bytes)
> Marking TSC unstable due to TSCs unsynchronized
> time.c: Detected 2461.549 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
> Checking aperture...
> Memory: 123928k/131008k available (2332k kernel code, 6532k reserved, 1359k
> data, 216k init)
> Calibrating delay using timer specific routine.. 5715.81 BogoMIPS
> (lpj=2857906)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> SMP alternatives: switching to UP code
> ACPI: Core revision 20070126
> do_IRQ: 0.48 No irq handler for vector
> do_IRQ: 0.48 No irq handler for vector
> do_IRQ: 0.48 No irq handler for vector
> do_IRQ: 0.48 No irq handler for vector
> do_IRQ: 0.48 No irq handler for vector
> do_IRQ: 0.48 No irq handler for vector
> do_IRQ: 0.48 No irq handler for vector
> do_IRQ: 0.48 No irq handler for vector
> do_IRQ: 0.48 No irq handler for vector
> do_IRQ: 0.48 No irq handler for vector
> Using local APIC timer interrupts.
> result 62504298
> Detected 62.504 MHz APIC timer.
> SMP alternatives: switching to SMP code
> Booting processor 1/2 APIC 0x1
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 11970.64 BogoMIPS
> (lpj=5985322)
Hmm, CPU#1 has ~ double speed of CPU#0
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> QEMU Virtual CPU version 0.9.0 stepping 03
> Brought up 2 CPUs
> migration_cost=1939
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: Using configuration type 1
> ACPI: Interpreter enabled
> ACPI: (supports S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> 0000:00:01.1: cannot adjust BAR0 (not I/O)
> 0000:00:01.1: cannot adjust BAR1 (not I/O)
> 0000:00:01.1: cannot adjust BAR2 (not I/O)
> 0000:00:01.1: cannot adjust BAR3 (not I/O)
> PCI quirk: region b000-b03f claimed by PIIX4 ACPI
> PCI quirk: region b100-b10f claimed by PIIX4 SMB
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 6 devices
> SCSI subsystem initialized
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> PCI-GART: No AMD northbridge found.
> Unable to handle kernel NULL pointer dereference at 0000000000000830 RIP:
> [<ffffffff8018401c>] do_timer+0x301/0x419
> PGD 0
> Oops: 0000 [1] PREEMPT SMP
> last sysfs file:
> CPU 0
> Modules linked in:
> Pid: 1, comm: swapper Not tainted 2.6.21-rc2-mm2 #2
> RIP: 0010:[<ffffffff8018401c>] [<ffffffff8018401c>] do_timer+0x301/0x419
> RSP: 0000:ffffffff804efda8 EFLAGS: 00000097
> RAX: 0000000045ed53ec RBX: 0000000000000800 RCX: 0000000000000008
> RDX: 000000000f41a777 RSI: 00000000000f4240 RDI: ffffffff8046c1c0
> RBP: 000000032d8863b3 R08: 0000000000000004 R09: ffffffff804e7700
> R10: ffff810080cdffc0 R11: 7fffffffffffffff R12: ffffffff8046c3c0
> R13: 0000000000000000 R14: 0000000000000001 R15: ffffffffffffffff
> FS: 0000000000000000(0000) GS:ffffffff8049c000(0000) knlGS:0000000000000000
> CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b
> CR2: 0000000000000830 CR3: 0000000000101000 CR4: 00000000000006e0
> Process swapper (pid: 1, threadinfo ffff810001450000, task ffff81000144f420)
> Stack: ffffffff804efef4 0000000000000001 ffffffff804efee8 ffffffff80465e20
> 0000000000000000 0000000000000000 0000000000000000 0000000000000000
> ffff810002602288 ffffffff801638fc 0000000000000080 0000000000000100
> Call Trace:
> <IRQ> [<ffffffff801638fc>] main_timer_handler+0x24/0x1de
> [<ffffffff80163ac8>] timer_interrupt+0x12/0x27
> [<ffffffff801104c5>] handle_IRQ_event+0x25/0x53
> [<ffffffff8019965c>] handle_edge_irq+0xe5/0x129
> [<ffffffff80162b4e>] do_IRQ+0x6c/0xd3
> [<ffffffff8017be24>] run_rebalance_domains+0x13d/0x3fd
> [<ffffffff80156e31>] ret_from_intr+0x0/0xa
> [<ffffffff80111839>] __do_softirq+0x3b/0x93
> [<ffffffff80157adc>] call_softirq+0x1c/0x28
> [<ffffffff80162a91>] do_softirq+0x2c/0x7d
> [<ffffffff80180fe0>] irq_exit+0x3f/0x50
> [<ffffffff8016c48b>] smp_apic_timer_interrupt+0x49/0x5c
> [<ffffffff80160d16>] default_idle+0x0/0x3d
> [<ffffffff80157586>] apic_timer_interrupt+0x66/0x70
> <EOI> [<ffffffff8010d03b>] permission+0x4e/0xb3
> [<ffffffff80132d52>] __lookup_hash+0x28/0x126
> [<ffffffff801b4246>] lookup_one_len_nd+0x62/0x70
> [<ffffffff801d63f5>] create_dir+0x46/0x1e3
> [<ffffffff801d65e9>] sysfs_create_dir+0x57/0x75
> [<ffffffff80220201>] kobject_shadow_add+0xe9/0x19d
> [<ffffffff802203e9>] kobject_register+0x20/0x39
> [<ffffffff8028d4dc>] bus_add_driver+0x59/0x19a
> [<ffffffff804b55fd>] init+0x142/0x23f
> [<ffffffff8015b1e0>] preempt_schedule+0x4f/0x7f
> [<ffffffff80125438>] schedule_tail+0x38/0x98
> [<ffffffff80157768>] child_rip+0xa/0x12
> [<ffffffff8024493d>] acpi_ds_init_one_object+0x0/0x7c
> [<ffffffff804b54bb>] init+0x0/0x23f
> [<ffffffff8015775e>] child_rip+0x0/0x12
>
>
> Code: 8b 53 30 48 c7 c7 5c e6 3f 80 8b 4b 34 48 89 6b 48 48 c7 43
> RIP [<ffffffff8018401c>] do_timer+0x301/0x419
> RSP <ffffffff804efda8>
> CR2: 0000000000000830
> Kernel panic - not syncing: Aiee, killing interrupt handler!
> Terminated
>
> ---
>
> list *do_timer+0x301
> 0xffffffff8018401c is in do_timer
> (/home/con/kernel/linux-2.6.21-rc2-mm2/include/linux/clocksource.h:186).
> 181 u64 tmp;
> 182
> 183 /* XXX - All of this could use a whole lot of optimization */
> 184 tmp = length_nsec;
> 185 tmp <<= c->shift;
> 186 tmp += c->mult/2;
> 187 do_div(tmp, c->mult);
> 188
> 189 c->cycle_interval = (cycle_t)tmp;
> 190 if (c->cycle_interval == 0)
That's extremly strange. This is inside of
clocksource_calculate_interval() in:
static void change_clocksource(void)
{
struct clocksource *new;
cycle_t now;
u64 nsec;
new = clocksource_get_next();
if (clock == new)
return;
now = clocksource_read(new);
nsec = __get_nsec_offset();
timespec_add_ns(&xtime, nsec);
clock = new;
clock->cycle_last = now;
clock->error = 0;
clock->xtime_nsec = 0;
clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
tick_clock_notify();
printk(KERN_INFO "Time: %s clocksource has been installed.\n",
clock->name);
}
So clock seems to be NULL, but was accessed before
clocksource_calculate_interval() as well.
tglx
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 12:52 ` 2.6.21-rc2-mm2 Thomas Gleixner
@ 2007-03-06 13:24 ` Con Kolivas
2007-03-06 14:47 ` 2.6.21-rc2-mm2 Thomas Gleixner
0 siblings, 1 reply; 48+ messages in thread
From: Con Kolivas @ 2007-03-06 13:24 UTC (permalink / raw)
To: tglx; +Cc: Andrew Morton, linux-kernel, john stultz
On Tuesday 06 March 2007 23:52, Thomas Gleixner wrote:
> On Tue, 2007-03-06 at 22:58 +1100, Con Kolivas wrote:
> > (tglx cc'ed as he may know something about this - sorry if it's
> > inappropriate)
>
> John cc'ed as well :)
Thanks.
> > [<ffffffff8018401c>] do_timer+0x301/0x419
> > ---
> >
> > list *do_timer+0x301
> > 0xffffffff8018401c is in do_timer
> > (/home/con/kernel/linux-2.6.21-rc2-mm2/include/linux/clocksource.h:186).
> > 181 u64 tmp;
> > 182
> > 183 /* XXX - All of this could use a whole lot of
> > optimization */ 184 tmp = length_nsec;
> > 185 tmp <<= c->shift;
> > 186 tmp += c->mult/2;
> > 187 do_div(tmp, c->mult);
> > 188
> > 189 c->cycle_interval = (cycle_t)tmp;
> > 190 if (c->cycle_interval == 0)
>
> That's extremly strange. This is inside of
> clocksource_calculate_interval() in:
>
> static void change_clocksource(void)
> {
> struct clocksource *new;
> cycle_t now;
> u64 nsec;
>
> new = clocksource_get_next();
>
> if (clock == new)
> return;
>
> now = clocksource_read(new);
> nsec = __get_nsec_offset();
> timespec_add_ns(&xtime, nsec);
>
> clock = new;
> clock->cycle_last = now;
>
> clock->error = 0;
> clock->xtime_nsec = 0;
> clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
>
> tick_clock_notify();
>
> printk(KERN_INFO "Time: %s clocksource has been installed.\n",
> clock->name);
> }
>
> So clock seems to be NULL, but was accessed before
> clocksource_calculate_interval() as well.
It seems to be specifically tripping at c->mult after reading c->shift if I'm
reading it correctly.
Note again, this is qemu, not real hardware and it will likely be giving very
unrealistic values for timer calibrations.
--
-ck
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 13:24 ` 2.6.21-rc2-mm2 Con Kolivas
@ 2007-03-06 14:47 ` Thomas Gleixner
2007-03-06 20:19 ` 2.6.21-rc2-mm2 Con Kolivas
0 siblings, 1 reply; 48+ messages in thread
From: Thomas Gleixner @ 2007-03-06 14:47 UTC (permalink / raw)
To: Con Kolivas; +Cc: Andrew Morton, linux-kernel, john stultz
On Wed, 2007-03-07 at 00:24 +1100, Con Kolivas wrote:
> > printk(KERN_INFO "Time: %s clocksource has been installed.\n",
> > clock->name);
> > }
> >
> > So clock seems to be NULL, but was accessed before
> > clocksource_calculate_interval() as well.
>
> It seems to be specifically tripping at c->mult after reading c->shift if I'm
> reading it correctly.
>
> Note again, this is qemu, not real hardware and it will likely be giving very
> unrealistic values for timer calibrations.
I know, but this does not really explain why the
tmp += c->mult/2;
results in a NULL pointer access after
tmp <<= c->shift;
Does disassembling the code in question give some info ? You might also
try to look with GDB at it.
tglx
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
` (2 preceding siblings ...)
2007-03-06 11:58 ` 2.6.21-rc2-mm2 Con Kolivas
@ 2007-03-06 15:46 ` J.A. Magallón
2007-03-07 6:24 ` 2.6.21-rc2-mm2 Jean Delvare
2007-03-07 8:39 ` 2.6.21-rc2-mm2 Sébastien Dugué
` (5 subsequent siblings)
9 siblings, 1 reply; 48+ messages in thread
From: J.A. Magallón @ 2007-03-06 15:46 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Tue, 6 Mar 2007 00:44:08 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> Temporarily at
>
> http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
>
I have another question about i2c...
The 'sensors' program gives me a stange message:
w83627thf-i2c-9191-290
Can't get adapter name for bus 9191 <<<<<-----------------------------
VCore: +1.49 V (min = +1.94 V, max = +1.94 V) ALARM
+12.0V: +11.86 V (min = +10.82 V, max = +13.19 V)
+ 3.3V: +3.30 V (min = +3.14 V, max = +3.47 V)
...
And gnome-sensors-applet can't read the sensors. If using libsensors, no
value is displayed (I suppose an applicacion bug). And the access to sensors
directly through i2c-dev gives an error like this:
Error opening sensor device file:
/sys/devices/platform/i2c-9191/9191-0290/....
In fact, the real path is
/sys/devices/platform/i2c-adapter:i2c-9191/9191-0290/....
I supposed it was a kernel change not tracked by userspace, but the strange
thing is that looking at the code the sensors applet lists the sensors
reding directories and files in /sys (AFAICS in the code).
So perhaps there is a little inconsistency, /sys says in some place the
sensor is at xxxxx, when it really is at yyyyy.
Or the 'i2c-adapter:' is a bug and should be 'i2c-adapter/'.
???
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2007.1 (Cooker) for i586
Linux 2.6.20-jam02 (gcc 4.1.2 20070302 (prerelease) (4.1.2-1mdv2007.1)) #1 SMP PREEMPT
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 14:47 ` 2.6.21-rc2-mm2 Thomas Gleixner
@ 2007-03-06 20:19 ` Con Kolivas
0 siblings, 0 replies; 48+ messages in thread
From: Con Kolivas @ 2007-03-06 20:19 UTC (permalink / raw)
To: tglx; +Cc: Andrew Morton, linux-kernel, john stultz
On Wednesday 07 March 2007 01:47, Thomas Gleixner wrote:
> On Wed, 2007-03-07 at 00:24 +1100, Con Kolivas wrote:
> > > printk(KERN_INFO "Time: %s clocksource has been installed.\n",
> > > clock->name);
> > > }
> > >
> > > So clock seems to be NULL, but was accessed before
> > > clocksource_calculate_interval() as well.
> >
> > It seems to be specifically tripping at c->mult after reading c->shift if
> > I'm reading it correctly.
> >
> > Note again, this is qemu, not real hardware and it will likely be giving
> > very unrealistic values for timer calibrations.
>
> I know, but this does not really explain why the
>
> tmp += c->mult/2;
>
> results in a NULL pointer access after
>
> tmp <<= c->shift;
/me shrugs
No idea.
> Does disassembling the code in question give some info ? You might also
> try to look with GDB at it.
Alas it wouldn't mean anything to me, sorry. And qemu doesn't work with gdb on
64bit processes in 32bit userspace even with a 64bit gdb.
--
-ck
^ permalink raw reply [flat|nested] 48+ messages in thread
* [BUGFIX][PATCH] fix NULL pointer in ia64/irq_chip-mask/unmask function
2007-03-06 11:35 ` 2.6.21-rc2-mm2 KAMEZAWA Hiroyuki
@ 2007-03-07 6:23 ` KAMEZAWA Hiroyuki
2007-03-07 6:57 ` Andrew Morton
0 siblings, 1 reply; 48+ messages in thread
From: KAMEZAWA Hiroyuki @ 2007-03-07 6:23 UTC (permalink / raw)
To: KAMEZAWA Hiroyuki
Cc: akpm, linux-kernel, tony.luck, rientjes, kaneshige.kenji
This patch fixes boot failure because irq_desc->mask() is NULL.
- Added mask/unmask functions to ia64's irq desc function table.
But I'm not sure this fix is correct or not. please review.
- rename hw_interrupt_type to irq_chip. hw_interrupt_type is old name.
Signed-Off-By: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Original BUG I met (following) was caused at irq 57:uhci_hcd:usb3.
xxBUG DESCRIPTIONxx
Unable to handle kernel NULL pointer dereference (address 0000000000000000)
yum-updatesd[3461]: Oops 11012296146944 [1]
Modules linked in: autofs4 hidp rfcomm l2cap bluetooth sunrpc ipv6 vfat fat dm_mirror dm_mod button parport_pc lp parport sg tg3 e100 shpchp mii usb_storage lpfc scsi_transport_fc mptspi mptscsih mptbase scsi_transport_spi sd_mod scsi_mod ext3 jbd ehci_hcd ohci_hcd uhci_hcd
Pid: 3461, CPU 5, comm: yum-updatesd
psr : 0000121008022018 ifs : 8000000000000286 ip : [<a0000001000e02b1>] Not tainted
ip is at move_native_irq+0x91/0x140
unat: 0000000000000000 pfs : 0000000000000205 rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : 00000000005a56a9
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c0270033f
csd : 0000000000000000 ssd : 0000000000000000
b0 : a000000100050430 b6 : a00000021b49d0c0 b7 : a000000100050400
f6 : 1003e0000000000000de0 f7 : 1003e0000000000000060
f8 : 1003e0000000000000025 f9 : 1003e00000000000022e0
f10 : 1003e0000000000000060 f11 : 1003e000000000000005d
r1 : a000000100d8d230 r2 : a0000001009f8c30 r3 : 0000000000005580
r8 : a000000100b8e178 r9 : 00000000000000ab r10 : 0000000000000039
r11 : 0000000000200000 r12 : e00001404b6f7e30 r13 : e00001404b6f0000
r14 : 0000000000200000 r15 : a0000001009f8c00 r16 : a000000100b5b160
r17 : 00000000dead4ead r18 : a0000001009f8c4c r19 : 0000000000000000
r20 : a000000100b5b110 r21 : a000000100b5b140 r22 : a000000100b5b110
r23 : 0050200500000874 r24 : a000000100ba98c0 r25 : a00000021b53d768
r26 : e00000018007e030 r27 : a000000100786238 r28 : e000000040004ae0
r29 : a0000001009f8c50 r30 : 0000000000000005 r31 : a0000001009f8c58
Call Trace:
[<a000000100013e20>] show_stack+0x40/0xa0
sp=e00001404b6f79c0 bsp=e00001404b6f1030
[<a0000001000147e0>] show_regs+0x840/0x880
sp=e00001404b6f7b90 bsp=e00001404b6f0fd0
[<a000000100037de0>] die+0x1c0/0x2a0
sp=e00001404b6f7b90 bsp=e00001404b6f0f88
[<a000000100647630>] ia64_do_page_fault+0x8d0/0xa00
sp=e00001404b6f7bb0 bsp=e00001404b6f0f38
[<a00000010000bf80>] ia64_leave_kernel+0x0/0x270
sp=e00001404b6f7c60 bsp=e00001404b6f0f38
[<a0000001000e02b0>] move_native_irq+0x90/0x140
sp=e00001404b6f7e30 bsp=e00001404b6f0f08
[<a000000100050430>] iosapic_end_level_irq+0x30/0xe0
sp=e00001404b6f7e30 bsp=e00001404b6f0ee8
[<a0000001000dac30>] __do_IRQ+0x390/0x3c0
sp=e00001404b6f7e30 bsp=e00001404b6f0ea8
[<a000000100011620>] ia64_handle_irq+0x1e0/0x2e0
sp=e00001404b6f7e30 bsp=e00001404b6f0e78
[<a00000010000bf80>] ia64_leave_kernel+0x0/0x270
sp=e00001404b6f7e30 bsp=e00001404b6f0e78
Kernel panic - not syncing: Aiee, killing interrupt handler!
---
arch/ia64/kernel/iosapic.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
Index: devel-tree/arch/ia64/kernel/iosapic.c
===================================================================
--- devel-tree.orig/arch/ia64/kernel/iosapic.c
+++ devel-tree/arch/ia64/kernel/iosapic.c
@@ -446,7 +446,7 @@ iosapic_end_level_irq (unsigned int irq)
#define iosapic_disable_level_irq mask_irq
#define iosapic_ack_level_irq nop
-struct hw_interrupt_type irq_type_iosapic_level = {
+struct irq_chip irq_type_iosapic_level = {
.name = "IO-SAPIC-level",
.startup = iosapic_startup_level_irq,
.shutdown = iosapic_shutdown_level_irq,
@@ -454,6 +454,8 @@ struct hw_interrupt_type irq_type_iosapi
.disable = iosapic_disable_level_irq,
.ack = iosapic_ack_level_irq,
.end = iosapic_end_level_irq,
+ .mask = mask_irq,
+ .unmask = unmask_irq,
.set_affinity = iosapic_set_affinity
};
@@ -493,7 +495,7 @@ iosapic_ack_edge_irq (unsigned int irq)
#define iosapic_disable_edge_irq nop
#define iosapic_end_edge_irq nop
-struct hw_interrupt_type irq_type_iosapic_edge = {
+struct irq_chip irq_type_iosapic_edge = {
.name = "IO-SAPIC-edge",
.startup = iosapic_startup_edge_irq,
.shutdown = iosapic_disable_edge_irq,
@@ -501,6 +503,8 @@ struct hw_interrupt_type irq_type_iosapi
.disable = iosapic_disable_edge_irq,
.ack = iosapic_ack_edge_irq,
.end = iosapic_end_edge_irq,
+ .mask = mask_irq,
+ .unmask = unmask_irq,
.set_affinity = iosapic_set_affinity
};
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 15:46 ` 2.6.21-rc2-mm2 J.A. Magallón
@ 2007-03-07 6:24 ` Jean Delvare
0 siblings, 0 replies; 48+ messages in thread
From: Jean Delvare @ 2007-03-07 6:24 UTC (permalink / raw)
To: J.A. Magallón ; +Cc: Andrew Morton, linux-kernel
Hi J.A.,
On Tue, 6 Mar 2007 16:46:09 +0100, J.A. Magallón wrote:
> On Tue, 6 Mar 2007 00:44:08 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> > Temporarily at
> >
> > http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
>
> I have another question about i2c...
>
> The 'sensors' program gives me a stange message:
>
> w83627thf-i2c-9191-290
> Can't get adapter name for bus 9191 <<<<<-----------------------------
> VCore: +1.49 V (min = +1.94 V, max = +1.94 V) ALARM
> +12.0V: +11.86 V (min = +10.82 V, max = +13.19 V)
> + 3.3V: +3.30 V (min = +3.14 V, max = +3.47 V)
> ...
>
> And gnome-sensors-applet can't read the sensors. If using libsensors, no
As a side note, this is bad design from gnome-sensors-applet. They
should definitely not plain stop just because they failed to retrieve
the i2c_adapter name, when all the monitored values are otherwise
available.
> value is displayed (I suppose an applicacion bug). And the access to sensors
> directly through i2c-dev gives an error like this:
>
> Error opening sensor device file:
> /sys/devices/platform/i2c-9191/9191-0290/....
>
> In fact, the real path is
>
> /sys/devices/platform/i2c-adapter:i2c-9191/9191-0290/....
>
> I supposed it was a kernel change not tracked by userspace, but the strange
> thing is that looking at the code the sensors applet lists the sensors
> reding directories and files in /sys (AFAICS in the code).
> So perhaps there is a little inconsistency, /sys says in some place the
> sensor is at xxxxx, when it really is at yyyyy.
> Or the 'i2c-adapter:' is a bug and should be 'i2c-adapter/'.
>
> ???
See:
http://bugzilla.kernel.org/show_bug.cgi?id=8115
lm-sensors SVN should work fine:
http://dl.lm-sensors.org/lm-sensors/snapshots/lm-sensors-r4338-20070305.tar.bz2
If not, please report.
We will release it as lm-sensors 2.10.3 soon.
--
Jean Delvare
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [BUGFIX][PATCH] fix NULL pointer in ia64/irq_chip-mask/unmask function
2007-03-07 6:23 ` [BUGFIX][PATCH] fix NULL pointer in ia64/irq_chip-mask/unmask function KAMEZAWA Hiroyuki
@ 2007-03-07 6:57 ` Andrew Morton
2007-03-07 7:32 ` KAMEZAWA Hiroyuki
0 siblings, 1 reply; 48+ messages in thread
From: Andrew Morton @ 2007-03-07 6:57 UTC (permalink / raw)
To: KAMEZAWA Hiroyuki; +Cc: linux-kernel, tony.luck, rientjes, kaneshige.kenji
On Wed, 7 Mar 2007 15:23:17 +0900 KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
> This patch fixes boot failure because irq_desc->mask() is NULL.
>
> - Added mask/unmask functions to ia64's irq desc function table.
> But I'm not sure this fix is correct or not. please review.
>
> - rename hw_interrupt_type to irq_chip. hw_interrupt_type is old name.
Thanks.
This bug is present in mainline too, isn't it?
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [BUGFIX][PATCH] fix NULL pointer in ia64/irq_chip-mask/unmask function
2007-03-07 6:57 ` Andrew Morton
@ 2007-03-07 7:32 ` KAMEZAWA Hiroyuki
0 siblings, 0 replies; 48+ messages in thread
From: KAMEZAWA Hiroyuki @ 2007-03-07 7:32 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, tony.luck, rientjes, kaneshige.kenji
On Tue, 6 Mar 2007 22:57:10 -0800
Andrew Morton <akpm@linux-foundation.org> wrote:
> On Wed, 7 Mar 2007 15:23:17 +0900 KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
>
> > This patch fixes boot failure because irq_desc->mask() is NULL.
> >
> > - Added mask/unmask functions to ia64's irq desc function table.
> > But I'm not sure this fix is correct or not. please review.
> >
> > - rename hw_interrupt_type to irq_chip. hw_interrupt_type is old name.
>
> Thanks.
>
> This bug is present in mainline too, isn't it?
>
Yes, I confirmed rc3 has this bug.
-Kame
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
` (3 preceding siblings ...)
2007-03-06 15:46 ` 2.6.21-rc2-mm2 J.A. Magallón
@ 2007-03-07 8:39 ` Sébastien Dugué
2007-03-07 8:49 ` 2.6.21-rc2-mm2 Andrew Morton
2007-03-07 19:46 ` 2.6.21-rc2-mm2 Luiz Fernando N. Capitulino
` (4 subsequent siblings)
9 siblings, 1 reply; 48+ messages in thread
From: Sébastien Dugué @ 2007-03-07 8:39 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Hi Andrew,
On Tue, 6 Mar 2007 00:44:08 -0800 Andrew Morton <akpm@linux-foundation.org> wrote:
>
> Temporarily at
>
> http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
>
> Will appear later at
>
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc2/2.6.20-rc2-mm2/
>
>
> - git-block.patch is having problems which are getting in the way - it has
> been dropped.
>
> - As a consequence all the AIO patches were dropped
>
Why? The aio notification and listio patches have nothing to do with
git-block.patch.
If you think those patches will be rendered obsolete by the new
syslet/fibril/whatever approach, then fine. Otherwise do you expect me to
resubmit?
Thanks,
Sébastien.
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-07 8:39 ` 2.6.21-rc2-mm2 Sébastien Dugué
@ 2007-03-07 8:49 ` Andrew Morton
2007-03-07 9:30 ` 2.6.21-rc2-mm2 Sébastien Dugué
0 siblings, 1 reply; 48+ messages in thread
From: Andrew Morton @ 2007-03-07 8:49 UTC (permalink / raw)
To: Sébastien Dugué; +Cc: linux-kernel
On Wed, 7 Mar 2007 09:39:48 +0100 Sébastien Dugué <sebastien.dugue@bull.net> wrote:
>
> Hi Andrew,
>
> On Tue, 6 Mar 2007 00:44:08 -0800 Andrew Morton <akpm@linux-foundation.org> wrote:
>
> >
> > Temporarily at
> >
> > http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
> >
> > Will appear later at
> >
> > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc2/2.6.20-rc2-mm2/
> >
> >
> > - git-block.patch is having problems which are getting in the way - it has
> > been dropped.
> >
> > - As a consequence all the AIO patches were dropped
> >
>
> Why? The aio notification and listio patches have nothing to do with
> git-block.patch.
Yes, I could have retained those with a little bit of jiggling. But...
> If you think those patches will be rendered obsolete by the new
> syslet/fibril/whatever approach, then fine.
Until this is sorted out I don't think we can add new core AIO code.
Particularly not new syscalls.
> Otherwise do you expect me to
> resubmit?
Is OK for now, I think.
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-07 8:49 ` 2.6.21-rc2-mm2 Andrew Morton
@ 2007-03-07 9:30 ` Sébastien Dugué
0 siblings, 0 replies; 48+ messages in thread
From: Sébastien Dugué @ 2007-03-07 9:30 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Wed, 7 Mar 2007 00:49:19 -0800 Andrew Morton <akpm@linux-foundation.org> wrote:
> On Wed, 7 Mar 2007 09:39:48 +0100 Sébastien Dugué <sebastien.dugue@bull.net> wrote:
>
> >
> > Hi Andrew,
> >
> > On Tue, 6 Mar 2007 00:44:08 -0800 Andrew Morton <akpm@linux-foundation.org> wrote:
> >
> > >
> > > Temporarily at
> > >
> > > http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
> > >
> > > Will appear later at
> > >
> > > ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc2/2.6.20-rc2-mm2/
> > >
> > >
> > > - git-block.patch is having problems which are getting in the way - it has
> > > been dropped.
> > >
> > > - As a consequence all the AIO patches were dropped
> > >
> >
> > Why? The aio notification and listio patches have nothing to do with
> > git-block.patch.
>
> Yes, I could have retained those with a little bit of jiggling. But...
>
> > If you think those patches will be rendered obsolete by the new
> > syslet/fibril/whatever approach, then fine.
>
> Until this is sorted out I don't think we can add new core AIO code.
> Particularly not new syscalls.
Makes sense.
>
> > Otherwise do you expect me to
> > resubmit?
>
> Is OK for now, I think.
Ok, thanks for the good job.
Sébastien.
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
` (4 preceding siblings ...)
2007-03-07 8:39 ` 2.6.21-rc2-mm2 Sébastien Dugué
@ 2007-03-07 19:46 ` Luiz Fernando N. Capitulino
2007-03-07 19:52 ` 2.6.21-rc2-mm2 Andrew Morton
2007-03-07 22:12 ` 2.6.21-rc2-mm2 hang Dave Hansen
` (3 subsequent siblings)
9 siblings, 1 reply; 48+ messages in thread
From: Luiz Fernando N. Capitulino @ 2007-03-07 19:46 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
Em Tue, 6 Mar 2007 00:44:08 -0800
Andrew Morton <akpm@linux-foundation.org> escreveu:
|
| Temporarily at
|
| http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
|
| Will appear later at
|
| ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc2/2.6.20-rc2-mm2/
Getting this while rebooting:
[ 166.588469] BUG: atomic counter underflow at:
[ 166.588527] [<c01047fa>] show_trace_log_lvl+0x1a/0x30
[ 166.588632] [<c0104f12>] show_trace+0x12/0x20
[ 166.588730] [<c0104fc6>] dump_stack+0x16/0x20
[ 166.588828] [<c01eaf41>] kref_put+0xa1/0x100
[ 166.588927] [<c01ea084>] kobject_put+0x14/0x20
[ 166.589027] [<c01ea222>] kobject_unregister+0x22/0x30
[ 166.589127] [<c025ed69>] bus_remove_driver+0x79/0x90
[ 166.589227] [<c025f9bb>] driver_unregister+0xb/0x20
[ 166.589327] [<c0205c03>] pci_unregister_driver+0x13/0x70
[ 166.589428] [<dc951c9d>] alsa_card_via82xx_exit+0xd/0xf [snd_via82xx]
[ 166.589534] [<c0140c10>] sys_delete_module+0x140/0x1b0
[ 166.589635] [<c01040ce>] sysenter_past_esp+0x5f/0x99
[ 166.589734] =======================
--
Luiz Fernando N. Capitulino
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-07 19:46 ` 2.6.21-rc2-mm2 Luiz Fernando N. Capitulino
@ 2007-03-07 19:52 ` Andrew Morton
2007-03-08 7:20 ` 2.6.21-rc2-mm2 Mike Galbraith
0 siblings, 1 reply; 48+ messages in thread
From: Andrew Morton @ 2007-03-07 19:52 UTC (permalink / raw)
To: Luiz Fernando N. Capitulino; +Cc: linux-kernel
On Wed, 7 Mar 2007 16:46:20 -0300 "Luiz Fernando N. Capitulino" <lcapitulino@mandriva.com.br> wrote:
> Em Tue, 6 Mar 2007 00:44:08 -0800
> Andrew Morton <akpm@linux-foundation.org> escreveu:
>
> |
> | Temporarily at
> |
> | http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
> |
> | Will appear later at
> |
> | ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc2/2.6.20-rc2-mm2/
>
> Getting this while rebooting:
>
> [ 166.588469] BUG: atomic counter underflow at:
> [ 166.588527] [<c01047fa>] show_trace_log_lvl+0x1a/0x30
> [ 166.588632] [<c0104f12>] show_trace+0x12/0x20
> [ 166.588730] [<c0104fc6>] dump_stack+0x16/0x20
> [ 166.588828] [<c01eaf41>] kref_put+0xa1/0x100
> [ 166.588927] [<c01ea084>] kobject_put+0x14/0x20
> [ 166.589027] [<c01ea222>] kobject_unregister+0x22/0x30
> [ 166.589127] [<c025ed69>] bus_remove_driver+0x79/0x90
> [ 166.589227] [<c025f9bb>] driver_unregister+0xb/0x20
> [ 166.589327] [<c0205c03>] pci_unregister_driver+0x13/0x70
> [ 166.589428] [<dc951c9d>] alsa_card_via82xx_exit+0xd/0xf [snd_via82xx]
> [ 166.589534] [<c0140c10>] sys_delete_module+0x140/0x1b0
> [ 166.589635] [<c01040ce>] sysenter_past_esp+0x5f/0x99
> [ 166.589734] =======================
>
Me too. Greg has reverted the offenging commit, so now rmmod of the IPMI
driver locks the machine again.
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2 hang
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
` (5 preceding siblings ...)
2007-03-07 19:46 ` 2.6.21-rc2-mm2 Luiz Fernando N. Capitulino
@ 2007-03-07 22:12 ` Dave Hansen
2007-03-07 22:46 ` Andrew Morton
` (2 more replies)
2007-03-07 22:41 ` [RFC: -mm patch] #if 0 mmc_deselect_cards() Adrian Bunk
` (2 subsequent siblings)
9 siblings, 3 replies; 48+ messages in thread
From: Dave Hansen @ 2007-03-07 22:12 UTC (permalink / raw)
To: Andrew Morton
Cc: linux-kernel, Ingo Molnar, Suresh Siddha, Thomas Gleixner, Nick Piggin
I'm seeing weird hangs running ltp on 2.6.21-rc2-mm2. It manifests
itself by the waitpid06 test in LTP hanging. This is very, very
reproducible in about 5 seconds by adding '-s wait' to the ltp command
line.
I see 4 waitpid06 processes on my 4-way machine spinning in userspace.
But, the weird part is that I can't ssh in once this happens, but I can
log in to the console. I've bisected it down to:
sched-fix-idle-load-balancing-in-softirqd-context
http://sr71.net/~dave/linux/elm3b82-config
sysrq-t:
bash S 00000001 0 1670 1667 1676 (NOTLB)
f761ff18 00000086 00000000 00000001 f7afb3ac c16f5f6c f761ff1c c0146eb5
e93d3067 fffb8000 f761ff20 c2d922e0 f7ec4030 f7ec413c 00006db1 1457ab10
00000025 c038eb60 fffffe00 f7ec4030 f7ec40e4 f761ff88 c011bc38 c014800d
Call Trace:
[<c011bc38>] do_wait+0x271/0x316
[<c011bd86>] sys_wait4+0x2f/0x31
[<c011bdaf>] sys_waitpid+0x27/0x2c
[<c010265c>] syscall_call+0x7/0xb
=======================
runltp S 00000001 0 1676 1670 1780 (NOTLB)
f7625f18 00000082 00000000 00000001 f7adf3ac c16f5bec f7625f1c c0146eb5
e8cf4067 fffab000 f7625f20 c2d9a2e0 c30ee050 c30ee15c 00007d8f 3c8acf22
00000025 c309e560 fffffe00 c30ee050 c30ee104 f7625f88 c011bc38 c014800d
Call Trace:
[<c011bc38>] do_wait+0x271/0x316
[<c011bd86>] sys_wait4+0x2f/0x31
[<c011bdaf>] sys_waitpid+0x27/0x2c
[<c010265c>] syscall_call+0x7/0xb
=======================
pan S 00000000 0 1780 1676 1831 (NOTLB)
f7639f30 00000086 00000000 00000000 00000000 00000246 f7ad095c f7f0e760
00000000 f7639f0c c0162748 c2d922e0 f7a0aab0 f7a0abbc 0000edaf abaf1d13
00000026 c038eb60 fffffe00 f7a0aab0 f7a0ab64 f7639fa0 c011bc38 e97e7065
Call Trace:
[<c011bc38>] do_wait+0x271/0x316
[<c011bd86>] sys_wait4+0x2f/0x31
[<c010265c>] syscall_call+0x7/0xb
=======================
waitpid06 S 00000001 0 1831 1780 1832 (NOTLB)
f7637f18 00000082 00000000 00000001 f769b134 c16ed36c f7637f1c c0146eb5
f7a38c80 00000000 f7bce030 c2d9a2e0 f7e78030 f7e7813c 00000f64 abdcd3a1
00000026 f7bce030 fffffe00 f7e78030 f7e780e4 f7637f88 c011bc38 c014800d
Call Trace:
[<c011bc38>] do_wait+0x271/0x316
[<c011bd86>] sys_wait4+0x2f/0x31
[<c011bdaf>] sys_waitpid+0x27/0x2c
[<c010265c>] syscall_call+0x7/0xb
=======================
-- Dave
^ permalink raw reply [flat|nested] 48+ messages in thread
* [RFC: -mm patch] #if 0 mmc_deselect_cards()
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
` (6 preceding siblings ...)
2007-03-07 22:12 ` 2.6.21-rc2-mm2 hang Dave Hansen
@ 2007-03-07 22:41 ` Adrian Bunk
2007-03-08 5:47 ` Pierre Ossman
2007-03-08 6:31 ` MMC: Fix typo in mmc highspeed Kyungmin Park
2007-03-07 22:41 ` 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity Adrian Bunk
2007-03-08 0:03 ` e1000 oops on boot [Re: 2.6.21-rc2-mm2] J.A. Magallón
9 siblings, 2 replies; 48+ messages in thread
From: Adrian Bunk @ 2007-03-07 22:41 UTC (permalink / raw)
To: Andrew Morton, drzeus-mmc; +Cc: linux-kernel
On Tue, Mar 06, 2007 at 12:44:08AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.20-rc2-mm1:
>...
> git-mmc.patch
>...
> git trees
>...
mmc_deselect_cards() is no longer used.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/mmc/core/mmc_ops.c | 2 ++
drivers/mmc/core/mmc_ops.h | 1 -
2 files changed, 2 insertions(+), 1 deletion(-)
--- linux-2.6.21-rc2-mm2/drivers/mmc/core/mmc_ops.h.old 2007-03-07 00:55:48.000000000 +0100
+++ linux-2.6.21-rc2-mm2/drivers/mmc/core/mmc_ops.h 2007-03-07 00:55:54.000000000 +0100
@@ -13,7 +13,6 @@
#define _MMC_MMC_OPS_H
int mmc_select_card(struct mmc_card *card);
-int mmc_deselect_cards(struct mmc_host *host);
int mmc_go_idle(struct mmc_host *host);
int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
int mmc_all_send_cid(struct mmc_host *host, u32 *cid);
--- linux-2.6.21-rc2-mm2/drivers/mmc/core/mmc_ops.c.old 2007-03-07 00:56:00.000000000 +0100
+++ linux-2.6.21-rc2-mm2/drivers/mmc/core/mmc_ops.c 2007-03-07 00:56:22.000000000 +0100
@@ -53,10 +53,12 @@
return _mmc_select_card(card->host, card);
}
+#if 0
int mmc_deselect_cards(struct mmc_host *host)
{
return _mmc_select_card(host, NULL);
}
+#endif /* 0 */
int mmc_go_idle(struct mmc_host *host)
{
^ permalink raw reply [flat|nested] 48+ messages in thread
* 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
` (7 preceding siblings ...)
2007-03-07 22:41 ` [RFC: -mm patch] #if 0 mmc_deselect_cards() Adrian Bunk
@ 2007-03-07 22:41 ` Adrian Bunk
2007-03-07 23:00 ` Andrew Morton
2007-03-08 0:03 ` e1000 oops on boot [Re: 2.6.21-rc2-mm2] J.A. Magallón
9 siblings, 1 reply; 48+ messages in thread
From: Adrian Bunk @ 2007-03-07 22:41 UTC (permalink / raw)
To: Andrew Morton, jgarzik; +Cc: linux-kernel, netdev
On Tue, Mar 06, 2007 at 12:44:08AM -0800, Andrew Morton wrote:
>...
> Changes since 2.6.20-rc2-mm1:
>...
> git-netdev-all.patch
>...
> git trees
>...
drivers/net/wireless/libertas/debugfs.c contains:
#define item_addr(n) ((u32) &((wlan_adapter *)0)->n)
This is wrong on 64bit architectures.
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2 hang
2007-03-07 22:12 ` 2.6.21-rc2-mm2 hang Dave Hansen
@ 2007-03-07 22:46 ` Andrew Morton
[not found] ` <20070307221628.GD26473@linux-os.sc.intel.com>
2007-03-08 1:07 ` Siddha, Suresh B
2 siblings, 0 replies; 48+ messages in thread
From: Andrew Morton @ 2007-03-07 22:46 UTC (permalink / raw)
To: Dave Hansen
Cc: linux-kernel, Ingo Molnar, Suresh Siddha, Thomas Gleixner,
Nick Piggin, Michal Piotrowski
On Wed, 07 Mar 2007 14:12:16 -0800
Dave Hansen <hansendc@us.ibm.com> wrote:
> I'm seeing weird hangs running ltp on 2.6.21-rc2-mm2. It manifests
> itself by the waitpid06 test in LTP hanging. This is very, very
> reproducible in about 5 seconds by adding '-s wait' to the ltp command
> line.
>
> I see 4 waitpid06 processes on my 4-way machine spinning in userspace.
> But, the weird part is that I can't ssh in once this happens, but I can
> log in to the console. I've bisected it down to:
>
> sched-fix-idle-load-balancing-in-softirqd-context
>
> http://sr71.net/~dave/linux/elm3b82-config
>
> sysrq-t:
>
> bash S 00000001 0 1670 1667 1676 (NOTLB)
> f761ff18 00000086 00000000 00000001 f7afb3ac c16f5f6c f761ff1c c0146eb5
> e93d3067 fffb8000 f761ff20 c2d922e0 f7ec4030 f7ec413c 00006db1 1457ab10
> 00000025 c038eb60 fffffe00 f7ec4030 f7ec40e4 f761ff88 c011bc38 c014800d
> Call Trace:
> [<c011bc38>] do_wait+0x271/0x316
> [<c011bd86>] sys_wait4+0x2f/0x31
> [<c011bdaf>] sys_waitpid+0x27/0x2c
> [<c010265c>] syscall_call+0x7/0xb
> =======================
> runltp S 00000001 0 1676 1670 1780 (NOTLB)
> f7625f18 00000082 00000000 00000001 f7adf3ac c16f5bec f7625f1c c0146eb5
> e8cf4067 fffab000 f7625f20 c2d9a2e0 c30ee050 c30ee15c 00007d8f 3c8acf22
> 00000025 c309e560 fffffe00 c30ee050 c30ee104 f7625f88 c011bc38 c014800d
> Call Trace:
> [<c011bc38>] do_wait+0x271/0x316
> [<c011bd86>] sys_wait4+0x2f/0x31
> [<c011bdaf>] sys_waitpid+0x27/0x2c
> [<c010265c>] syscall_call+0x7/0xb
> =======================
> pan S 00000000 0 1780 1676 1831 (NOTLB)
> f7639f30 00000086 00000000 00000000 00000000 00000246 f7ad095c f7f0e760
> 00000000 f7639f0c c0162748 c2d922e0 f7a0aab0 f7a0abbc 0000edaf abaf1d13
> 00000026 c038eb60 fffffe00 f7a0aab0 f7a0ab64 f7639fa0 c011bc38 e97e7065
> Call Trace:
> [<c011bc38>] do_wait+0x271/0x316
> [<c011bd86>] sys_wait4+0x2f/0x31
> [<c010265c>] syscall_call+0x7/0xb
> =======================
> waitpid06 S 00000001 0 1831 1780 1832 (NOTLB)
> f7637f18 00000082 00000000 00000001 f769b134 c16ed36c f7637f1c c0146eb5
> f7a38c80 00000000 f7bce030 c2d9a2e0 f7e78030 f7e7813c 00000f64 abdcd3a1
> 00000026 f7bce030 fffffe00 f7e78030 f7e780e4 f7637f88 c011bc38 c014800d
> Call Trace:
> [<c011bc38>] do_wait+0x271/0x316
> [<c011bd86>] sys_wait4+0x2f/0x31
> [<c011bdaf>] sys_waitpid+0x27/0x2c
> [<c010265c>] syscall_call+0x7/0xb
> =======================
>
Michal has reported a similar thing in recent -mm's.
sched-fix-idle-load-balancing-in-softirqd-context was added in
2.6.21-rc2-mm1.
I'll drop sched-fix-idle-load-balancing-in-softirqd-context.patch and
sched-fix-idle-load-balancing-in-softirqd-context-fix.patch and, as a
consequence, sched-dynticks-idle-load-balancing-v3.patch.
Thanks for doing the bisect - it really helps.
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity
2007-03-07 22:41 ` 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity Adrian Bunk
@ 2007-03-07 23:00 ` Andrew Morton
2007-03-08 8:02 ` Adrian Bunk
2007-03-09 2:11 ` Tony Breeds
0 siblings, 2 replies; 48+ messages in thread
From: Andrew Morton @ 2007-03-07 23:00 UTC (permalink / raw)
To: Adrian Bunk; +Cc: jgarzik, linux-kernel, netdev
On Wed, 7 Mar 2007 23:41:16 +0100
Adrian Bunk <bunk@stusta.de> wrote:
> On Tue, Mar 06, 2007 at 12:44:08AM -0800, Andrew Morton wrote:
> >...
> > Changes since 2.6.20-rc2-mm1:
> >...
> > git-netdev-all.patch
> >...
> > git trees
> >...
>
> drivers/net/wireless/libertas/debugfs.c contains:
> #define item_addr(n) ((u32) &((wlan_adapter *)0)->n)
>
> This is wrong on 64bit architectures.
Is OK - it is simply yet another reimplementation of offsetof(). Hint.
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2 hang
[not found] ` <20070307221628.GD26473@linux-os.sc.intel.com>
@ 2007-03-07 23:07 ` Dave Hansen
2007-03-07 23:16 ` Andrew Morton
0 siblings, 1 reply; 48+ messages in thread
From: Dave Hansen @ 2007-03-07 23:07 UTC (permalink / raw)
To: Siddha, Suresh B
Cc: Andrew Morton, linux-kernel, Ingo Molnar, Thomas Gleixner, Nick Piggin
On Wed, 2007-03-07 at 14:16 -0800, Siddha, Suresh B wrote:
> On Wed, Mar 07, 2007 at 02:12:16PM -0800, Dave Hansen wrote:
> > I'm seeing weird hangs running ltp on 2.6.21-rc2-mm2. It manifests
> > itself by the waitpid06 test in LTP hanging. This is very, very
> > reproducible in about 5 seconds by adding '-s wait' to the ltp command
> > line.
> >
> > I see 4 waitpid06 processes on my 4-way machine spinning in userspace.
> > But, the weird part is that I can't ssh in once this happens, but I can
> > log in to the console. I've bisected it down to:
> >
> > sched-fix-idle-load-balancing-in-softirqd-context
>
> This sounds like an issue in merge we recently had and 2.6.21-rc2-mm2 already
> has a fix for this.
>
> sched-fix-idle-load-balancing-in-softirqd-context-fix.patch
>
> Can you please apply both
> sched-fix-idle-load-balancing-in-softirqd-context
> sched-fix-idle-load-balancing-in-softirqd-context-fix.patch
> and see if you still see this problem?
I was confused that I couldn't find this fix in my patches directory,
but I double-checked, and realized that I was still on 2.6.21-rc2-mm1.
I must have grabbed the wrong broken-out tarball when I started the
bisect. Darn.
Anyway, 2.6.21-rc2-mm2 appears to be OK. Sorry for the false alarm.
-- Dave
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2 hang
2007-03-07 23:07 ` Dave Hansen
@ 2007-03-07 23:16 ` Andrew Morton
2007-03-08 15:07 ` Michal Piotrowski
0 siblings, 1 reply; 48+ messages in thread
From: Andrew Morton @ 2007-03-07 23:16 UTC (permalink / raw)
To: Dave Hansen, Michal Piotrowski
Cc: Siddha, Suresh B, linux-kernel, Ingo Molnar, Thomas Gleixner,
Nick Piggin
On Wed, 07 Mar 2007 15:07:21 -0800
Dave Hansen <hansendc@us.ibm.com> wrote:
> On Wed, 2007-03-07 at 14:16 -0800, Siddha, Suresh B wrote:
> > On Wed, Mar 07, 2007 at 02:12:16PM -0800, Dave Hansen wrote:
> > > I'm seeing weird hangs running ltp on 2.6.21-rc2-mm2. It manifests
> > > itself by the waitpid06 test in LTP hanging. This is very, very
> > > reproducible in about 5 seconds by adding '-s wait' to the ltp command
> > > line.
> > >
> > > I see 4 waitpid06 processes on my 4-way machine spinning in userspace.
> > > But, the weird part is that I can't ssh in once this happens, but I can
> > > log in to the console. I've bisected it down to:
> > >
> > > sched-fix-idle-load-balancing-in-softirqd-context
> >
> > This sounds like an issue in merge we recently had and 2.6.21-rc2-mm2 already
> > has a fix for this.
> >
> > sched-fix-idle-load-balancing-in-softirqd-context-fix.patch
> >
> > Can you please apply both
> > sched-fix-idle-load-balancing-in-softirqd-context
> > sched-fix-idle-load-balancing-in-softirqd-context-fix.patch
> > and see if you still see this problem?
>
> I was confused that I couldn't find this fix in my patches directory,
> but I double-checked, and realized that I was still on 2.6.21-rc2-mm1.
> I must have grabbed the wrong broken-out tarball when I started the
> bisect. Darn.
>
> Anyway, 2.6.21-rc2-mm2 appears to be OK. Sorry for the false alarm.
>
Ah, OK. I'll undrop those three patches.
Michal, did rc2-mm2 make that weird hang go away for you?
^ permalink raw reply [flat|nested] 48+ messages in thread
* e1000 oops on boot [Re: 2.6.21-rc2-mm2]
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
` (8 preceding siblings ...)
2007-03-07 22:41 ` 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity Adrian Bunk
@ 2007-03-08 0:03 ` J.A. Magallón
2007-03-08 0:23 ` Andrew Morton
9 siblings, 1 reply; 48+ messages in thread
From: J.A. Magallón @ 2007-03-08 0:03 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel
On Tue, 6 Mar 2007 00:44:08 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> Temporarily at
>
> http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
>
e1000 gave this on a warm boot:
http://belly.cps.unizar.es/~magallon/oops/IMG_1510.JPG
Any idea ?
--
J.A. Magallon <jamagallon()ono!com> \ Software is like sex:
\ It's better when it's free
Mandriva Linux release 2007.1 (Cooker) for i586
Linux 2.6.20-jam02 (gcc 4.1.2 20070302 (prerelease) (4.1.2-1mdv2007.1)) #1 SMP PREEMPT
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: e1000 oops on boot [Re: 2.6.21-rc2-mm2]
2007-03-08 0:03 ` e1000 oops on boot [Re: 2.6.21-rc2-mm2] J.A. Magallón
@ 2007-03-08 0:23 ` Andrew Morton
2007-03-08 0:28 ` Randy Dunlap
0 siblings, 1 reply; 48+ messages in thread
From: Andrew Morton @ 2007-03-08 0:23 UTC (permalink / raw)
To: J.A. Magallón ; +Cc: linux-kernel, Auke Kok
On Thu, 8 Mar 2007 01:03:23 +0100
"J.A. Magall__n" <jamagallon@ono.com> wrote:
> On Tue, 6 Mar 2007 00:44:08 -0800, Andrew Morton <akpm@linux-foundation.org> wrote:
>
> >
> > Temporarily at
> >
> > http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
> >
>
> e1000 gave this on a warm boot:
>
> http://belly.cps.unizar.es/~magallon/oops/IMG_1510.JPG
>
> Any idea ?
e1000_intr() did a jump-to-zero.
This might be because e1000 is calling request_irq() before everything is
set up. We used to have that fixed, but it got reverted because it broke
other things (msi, iirc).
The below will apppear in -rc3-mm1 (hopefully later today) and it will
hopefully fix that crash.
From: Auke Kok <auke-jan.h.kok@intel.com>
DEBUG_SHIRQ code exposed that e1000 was not ready for incoming interrupts
after having called pci_request_irq. This obviously requires us to finish our
software setup which assigns the irq handler before we request the irq.
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/net/e1000/e1000_main.c | 66 +++++++++++++++++++++----------
1 files changed, 45 insertions(+), 21 deletions(-)
diff -puN drivers/net/e1000/e1000_main.c~e1000-fix-be-ready-for-incoming-irq-at-pci_request_irq drivers/net/e1000/e1000_main.c
--- a/drivers/net/e1000/e1000_main.c~e1000-fix-be-ready-for-incoming-irq-at-pci_request_irq
+++ a/drivers/net/e1000/e1000_main.c
@@ -522,14 +522,15 @@ e1000_release_manageability(struct e1000
}
}
-int
-e1000_up(struct e1000_adapter *adapter)
+/**
+ * e1000_configure - configure the hardware for RX and TX
+ * @adapter = private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
int i;
- /* hardware has been reset, we need to reload some things */
-
e1000_set_multi(netdev);
e1000_restore_vlan(adapter);
@@ -548,14 +549,20 @@ e1000_up(struct e1000_adapter *adapter)
}
adapter->tx_queue_len = netdev->tx_queue_len;
+}
+
+int e1000_up(struct e1000_adapter *adapter)
+{
+ /* hardware has been reset, we need to reload some things */
+ e1000_configure(adapter);
+
+ clear_bit(__E1000_DOWN, &adapter->flags);
#ifdef CONFIG_E1000_NAPI
- netif_poll_enable(netdev);
+ netif_poll_enable(adapter->netdev);
#endif
e1000_irq_enable(adapter);
- clear_bit(__E1000_DOWN, &adapter->flags);
-
/* fire a link change interrupt to start the watchdog */
E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
return 0;
@@ -640,15 +647,15 @@ e1000_down(struct e1000_adapter *adapter
* reschedule our watchdog timer */
set_bit(__E1000_DOWN, &adapter->flags);
+#ifdef CONFIG_E1000_NAPI
+ netif_poll_disable(netdev);
+#endif
e1000_irq_disable(adapter);
del_timer_sync(&adapter->tx_fifo_stall_timer);
del_timer_sync(&adapter->watchdog_timer);
del_timer_sync(&adapter->phy_info_timer);
-#ifdef CONFIG_E1000_NAPI
- netif_poll_disable(netdev);
-#endif
netdev->tx_queue_len = adapter->tx_queue_len;
adapter->link_speed = 0;
adapter->link_duplex = 0;
@@ -1410,21 +1417,17 @@ e1000_open(struct net_device *netdev)
return -EBUSY;
/* allocate transmit descriptors */
- if ((err = e1000_setup_all_tx_resources(adapter)))
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
goto err_setup_tx;
/* allocate receive descriptors */
- if ((err = e1000_setup_all_rx_resources(adapter)))
- goto err_setup_rx;
-
- err = e1000_request_irq(adapter);
+ err = e1000_setup_all_rx_resources(adapter);
if (err)
- goto err_req_irq;
+ goto err_setup_rx;
e1000_power_up_phy(adapter);
- if ((err = e1000_up(adapter)))
- goto err_up;
adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
if ((adapter->hw.mng_cookie.status &
E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
@@ -1437,12 +1440,33 @@ e1000_open(struct net_device *netdev)
e1000_check_mng_mode(&adapter->hw))
e1000_get_hw_control(adapter);
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so. */
+ e1000_configure(adapter);
+
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as e1000_up() */
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+#ifdef CONFIG_E1000_NAPI
+ netif_poll_enable(netdev);
+#endif
+
+ e1000_irq_enable(adapter);
+
+ /* fire a link status change interrupt to start the watchdog */
+ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_LSC);
+
return E1000_SUCCESS;
-err_up:
- e1000_power_down_phy(adapter);
- e1000_free_irq(adapter);
err_req_irq:
+ e1000_release_hw_control(adapter);
+ e1000_power_down_phy(adapter);
e1000_free_all_rx_resources(adapter);
err_setup_rx:
e1000_free_all_tx_resources(adapter);
_
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: e1000 oops on boot [Re: 2.6.21-rc2-mm2]
2007-03-08 0:23 ` Andrew Morton
@ 2007-03-08 0:28 ` Randy Dunlap
2007-03-08 0:35 ` Kok, Auke
0 siblings, 1 reply; 48+ messages in thread
From: Randy Dunlap @ 2007-03-08 0:28 UTC (permalink / raw)
To: Andrew Morton; +Cc: J.A. Magallón , linux-kernel, Auke Kok
On Wed, 7 Mar 2007 16:23:15 -0800 Andrew Morton wrote:
> The below will apppear in -rc3-mm1 (hopefully later today) and it will
> hopefully fix that crash.
>
>
> From: Auke Kok <auke-jan.h.kok@intel.com>
>
> ---
>
> drivers/net/e1000/e1000_main.c | 66 +++++++++++++++++++++----------
> 1 files changed, 45 insertions(+), 21 deletions(-)
>
> diff -puN drivers/net/e1000/e1000_main.c~e1000-fix-be-ready-for-incoming-irq-at-pci_request_irq drivers/net/e1000/e1000_main.c
> --- a/drivers/net/e1000/e1000_main.c~e1000-fix-be-ready-for-incoming-irq-at-pci_request_irq
> +++ a/drivers/net/e1000/e1000_main.c
> @@ -522,14 +522,15 @@ e1000_release_manageability(struct e1000
> }
> }
Auke:
Below, please s/@adapter =/@adapter:/ to make it be correct
kernel-doc notation.
> -int
> -e1000_up(struct e1000_adapter *adapter)
> +/**
> + * e1000_configure - configure the hardware for RX and TX
> + * @adapter = private board structure
> + **/
> +static void e1000_configure(struct e1000_adapter *adapter)
> {
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: e1000 oops on boot [Re: 2.6.21-rc2-mm2]
2007-03-08 0:28 ` Randy Dunlap
@ 2007-03-08 0:35 ` Kok, Auke
0 siblings, 0 replies; 48+ messages in thread
From: Kok, Auke @ 2007-03-08 0:35 UTC (permalink / raw)
To: Randy Dunlap; +Cc: Andrew Morton, "J.A. Magallón", linux-kernel
Randy Dunlap wrote:
> On Wed, 7 Mar 2007 16:23:15 -0800 Andrew Morton wrote:
>
>> The below will apppear in -rc3-mm1 (hopefully later today) and it will
>> hopefully fix that crash.
>>
>>
>> From: Auke Kok <auke-jan.h.kok@intel.com>
>>
>> ---
>>
>> drivers/net/e1000/e1000_main.c | 66 +++++++++++++++++++++----------
>> 1 files changed, 45 insertions(+), 21 deletions(-)
>>
>> diff -puN drivers/net/e1000/e1000_main.c~e1000-fix-be-ready-for-incoming-irq-at-pci_request_irq drivers/net/e1000/e1000_main.c
>> --- a/drivers/net/e1000/e1000_main.c~e1000-fix-be-ready-for-incoming-irq-at-pci_request_irq
>> +++ a/drivers/net/e1000/e1000_main.c
>> @@ -522,14 +522,15 @@ e1000_release_manageability(struct e1000
>> }
>> }
>
> Auke:
>
> Below, please s/@adapter =/@adapter:/ to make it be correct
> kernel-doc notation.
ah, sorry about that :)
I'll adjust it later when doing some more cleanups. Thanks for the pointer.
Auke
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2 hang
2007-03-07 22:12 ` 2.6.21-rc2-mm2 hang Dave Hansen
2007-03-07 22:46 ` Andrew Morton
[not found] ` <20070307221628.GD26473@linux-os.sc.intel.com>
@ 2007-03-08 1:07 ` Siddha, Suresh B
2 siblings, 0 replies; 48+ messages in thread
From: Siddha, Suresh B @ 2007-03-08 1:07 UTC (permalink / raw)
To: linux-kernel
On Wed, Mar 07, 2007 at 02:12:16PM -0800, Dave Hansen wrote:
> I'm seeing weird hangs running ltp on 2.6.21-rc2-mm2. It manifests
> itself by the waitpid06 test in LTP hanging. This is very, very
> reproducible in about 5 seconds by adding '-s wait' to the ltp command
> line.
>
> I see 4 waitpid06 processes on my 4-way machine spinning in userspace.
> But, the weird part is that I can't ssh in once this happens, but I can
> log in to the console. I've bisected it down to:
>
> sched-fix-idle-load-balancing-in-softirqd-context
[having some mailer issues. Pl ignore if this is a duplicate]
This sounds like an issue in merge we recently had and 2.6.21-rc2-mm2 already
has a fix for this.
sched-fix-idle-load-balancing-in-softirqd-context-fix.patch
Can you please apply both
sched-fix-idle-load-balancing-in-softirqd-context
sched-fix-idle-load-balancing-in-softirqd-context-fix.patch
and see if you still see this problem?
thanks,
suresh
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: [RFC: -mm patch] #if 0 mmc_deselect_cards()
2007-03-07 22:41 ` [RFC: -mm patch] #if 0 mmc_deselect_cards() Adrian Bunk
@ 2007-03-08 5:47 ` Pierre Ossman
2007-03-19 9:21 ` [-mm patch] remove mmc_deselect_cards() Adrian Bunk
2007-03-08 6:31 ` MMC: Fix typo in mmc highspeed Kyungmin Park
1 sibling, 1 reply; 48+ messages in thread
From: Pierre Ossman @ 2007-03-08 5:47 UTC (permalink / raw)
To: Adrian Bunk; +Cc: Andrew Morton, linux-kernel
Adrian Bunk wrote:
> On Tue, Mar 06, 2007 at 12:44:08AM -0800, Andrew Morton wrote:
>> ...
>> Changes since 2.6.20-rc2-mm1:
>> ...
>> git-mmc.patch
>> ...
>> git trees
>> ...
>
> mmc_deselect_cards() is no longer used.
>
> Signed-off-by: Adrian Bunk <bunk@stusta.de>
>
Indeed, but it's probably better to just remove it rather than have old crud
lying around.
Rgds
--
-- Pierre Ossman
Linux kernel, MMC maintainer http://www.kernel.org
PulseAudio, core developer http://pulseaudio.org
rdesktop, core developer http://www.rdesktop.org
^ permalink raw reply [flat|nested] 48+ messages in thread
* MMC: Fix typo in mmc highspeed
2007-03-07 22:41 ` [RFC: -mm patch] #if 0 mmc_deselect_cards() Adrian Bunk
2007-03-08 5:47 ` Pierre Ossman
@ 2007-03-08 6:31 ` Kyungmin Park
1 sibling, 0 replies; 48+ messages in thread
From: Kyungmin Park @ 2007-03-08 6:31 UTC (permalink / raw)
To: drzeus-mmc; +Cc: linux-kernel
MMC: Fix typo in mmc highspeed
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
--
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index 4a73e8b..3b8f7af 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -1134,7 +1134,7 @@ static void mmc_process_ext_csds(struct mmc_host
*host)
mmc_card_set_highspeed(card);
- host->ios.timing = MMC_TIMING_SD_HS;
+ host->ios.timing = MMC_TIMING_MMC_HS;
mmc_set_ios(host);
}
^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-07 19:52 ` 2.6.21-rc2-mm2 Andrew Morton
@ 2007-03-08 7:20 ` Mike Galbraith
0 siblings, 0 replies; 48+ messages in thread
From: Mike Galbraith @ 2007-03-08 7:20 UTC (permalink / raw)
To: Andrew Morton; +Cc: Luiz Fernando N. Capitulino, linux-kernel
On Wed, 2007-03-07 at 11:52 -0800, Andrew Morton wrote:
> On Wed, 7 Mar 2007 16:46:20 -0300 "Luiz Fernando N. Capitulino" <lcapitulino@mandriva.com.br> wrote:
>
> > Em Tue, 6 Mar 2007 00:44:08 -0800
> > Andrew Morton <akpm@linux-foundation.org> escreveu:
> >
> > |
> > | Temporarily at
> > |
> > | http://userweb.kernel.org/~akpm/2.6.21-rc2-mm2/
> > |
> > | Will appear later at
> > |
> > | ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.20-rc2/2.6.20-rc2-mm2/
> >
> > Getting this while rebooting:
> >
> > [ 166.588469] BUG: atomic counter underflow at:
> > [ 166.588527] [<c01047fa>] show_trace_log_lvl+0x1a/0x30
> > [ 166.588632] [<c0104f12>] show_trace+0x12/0x20
> > [ 166.588730] [<c0104fc6>] dump_stack+0x16/0x20
> > [ 166.588828] [<c01eaf41>] kref_put+0xa1/0x100
> > [ 166.588927] [<c01ea084>] kobject_put+0x14/0x20
> > [ 166.589027] [<c01ea222>] kobject_unregister+0x22/0x30
> > [ 166.589127] [<c025ed69>] bus_remove_driver+0x79/0x90
> > [ 166.589227] [<c025f9bb>] driver_unregister+0xb/0x20
> > [ 166.589327] [<c0205c03>] pci_unregister_driver+0x13/0x70
> > [ 166.589428] [<dc951c9d>] alsa_card_via82xx_exit+0xd/0xf [snd_via82xx]
> > [ 166.589534] [<c0140c10>] sys_delete_module+0x140/0x1b0
> > [ 166.589635] [<c01040ce>] sysenter_past_esp+0x5f/0x99
> > [ 166.589734] =======================
> >
>
> Me too. Greg has reverted the offenging commit, so now rmmod of the IPMI
> driver locks the machine again.
Hi,
The hang (which /me screwed up fixing) isn't upon rmmod, it's when IPMI
is built-in and ipmi_si finds nobody home. Driver tries to back out,
and waits forever for completion. (about 0.7 seconds into boot)
-Mike
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity
2007-03-07 23:00 ` Andrew Morton
@ 2007-03-08 8:02 ` Adrian Bunk
2007-03-09 2:11 ` Tony Breeds
1 sibling, 0 replies; 48+ messages in thread
From: Adrian Bunk @ 2007-03-08 8:02 UTC (permalink / raw)
To: Andrew Morton; +Cc: jgarzik, linux-kernel, netdev
On Wed, Mar 07, 2007 at 03:00:57PM -0800, Andrew Morton wrote:
> On Wed, 7 Mar 2007 23:41:16 +0100
> Adrian Bunk <bunk@stusta.de> wrote:
>
> > On Tue, Mar 06, 2007 at 12:44:08AM -0800, Andrew Morton wrote:
> > >...
> > > Changes since 2.6.20-rc2-mm1:
> > >...
> > > git-netdev-all.patch
> > >...
> > > git trees
> > >...
> >
> > drivers/net/wireless/libertas/debugfs.c contains:
> > #define item_addr(n) ((u32) &((wlan_adapter *)0)->n)
> >
> > This is wrong on 64bit architectures.
>
> Is OK - it is simply yet another reimplementation of offsetof(). Hint.
Thanks for the correction - it seems C pointers and me will never become
close friends...
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2
2007-03-06 10:27 ` 2.6.21-rc2-mm2 KAMEZAWA Hiroyuki
2007-03-06 11:09 ` 2.6.21-rc2-mm2 Andrew Morton
@ 2007-03-08 8:41 ` Magnus Damm
1 sibling, 0 replies; 48+ messages in thread
From: Magnus Damm @ 2007-03-08 8:41 UTC (permalink / raw)
To: KAMEZAWA Hiroyuki; +Cc: Andrew Morton, linux-kernel
On 3/6/07, KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> wrote:
>
> Following panic ouccurred (always) on ia64/NUMA(with empty node.)
>
> Bug in here.
> ==
> void move_native_irq(int irq)
> {
> struct irq_desc *desc = irq_desc + irq;
>
> if (likely(!(desc->status & IRQ_MOVE_PENDING)))
> return;
>
> if (unlikely(desc->status & IRQ_DISABLED))
> return;
>
> desc->chip->mask(irq); <---------maybe this *mask* is NULL pointer
> move_masked_irq(irq);
> desc->chip->unmask(irq);
> }
> ==
>
> Is "mask" always valid pointer ?
Not last time I checked. Have a look at "no_irq_chip" in
linux/kernel/irq/handle.c.
Your problem looks somewhat similar to the problem I had with irq
migration on ia64:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=29a002776ba5ef170446910b1f93c480cdd43706
/ magnus
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2 hang
2007-03-07 23:16 ` Andrew Morton
@ 2007-03-08 15:07 ` Michal Piotrowski
0 siblings, 0 replies; 48+ messages in thread
From: Michal Piotrowski @ 2007-03-08 15:07 UTC (permalink / raw)
To: Andrew Morton
Cc: Dave Hansen, Michal Piotrowski, Siddha, Suresh B, linux-kernel,
Ingo Molnar, Thomas Gleixner, Nick Piggin
Andrew Morton napisał(a):
> On Wed, 07 Mar 2007 15:07:21 -0800
> Dave Hansen <hansendc@us.ibm.com> wrote:
>
>> On Wed, 2007-03-07 at 14:16 -0800, Siddha, Suresh B wrote:
>>> On Wed, Mar 07, 2007 at 02:12:16PM -0800, Dave Hansen wrote:
>>>> I'm seeing weird hangs running ltp on 2.6.21-rc2-mm2. It manifests
>>>> itself by the waitpid06 test in LTP hanging. This is very, very
>>>> reproducible in about 5 seconds by adding '-s wait' to the ltp command
>>>> line.
>>>>
>>>> I see 4 waitpid06 processes on my 4-way machine spinning in userspace.
>>>> But, the weird part is that I can't ssh in once this happens, but I can
>>>> log in to the console. I've bisected it down to:
>>>>
>>>> sched-fix-idle-load-balancing-in-softirqd-context
>>> This sounds like an issue in merge we recently had and 2.6.21-rc2-mm2 already
>>> has a fix for this.
>>>
>>> sched-fix-idle-load-balancing-in-softirqd-context-fix.patch
>>>
>>> Can you please apply both
>>> sched-fix-idle-load-balancing-in-softirqd-context
>>> sched-fix-idle-load-balancing-in-softirqd-context-fix.patch
>>> and see if you still see this problem?
>> I was confused that I couldn't find this fix in my patches directory,
>> but I double-checked, and realized that I was still on 2.6.21-rc2-mm1.
>> I must have grabbed the wrong broken-out tarball when I started the
>> bisect. Darn.
>>
>> Anyway, 2.6.21-rc2-mm2 appears to be OK. Sorry for the false alarm.
>>
>
> Ah, OK. I'll undrop those three patches.
>
> Michal, did rc2-mm2 make that weird hang go away for you?
>
No, it works fine for me since -rc2-mm2.
Regards,
Michal
--
Michal K. K. Piotrowski
LTG - Linux Testers Group (PL)
(http://www.stardust.webpages.pl/ltg/)
LTG - Linux Testers Group (EN)
(http://www.stardust.webpages.pl/linux_testers_group_en/)
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity
2007-03-07 23:00 ` Andrew Morton
2007-03-08 8:02 ` Adrian Bunk
@ 2007-03-09 2:11 ` Tony Breeds
2007-03-09 14:19 ` John W. Linville
1 sibling, 1 reply; 48+ messages in thread
From: Tony Breeds @ 2007-03-09 2:11 UTC (permalink / raw)
To: Andrew Morton; +Cc: Adrian Bunk, jgarzik, linux-kernel, netdev
On Wed, Mar 07, 2007 at 03:00:57PM -0800, Andrew Morton wrote:
> On Wed, 7 Mar 2007 23:41:16 +0100
> Adrian Bunk <bunk@stusta.de> wrote:
>
> > On Tue, Mar 06, 2007 at 12:44:08AM -0800, Andrew Morton wrote:
> > >...
> > > Changes since 2.6.20-rc2-mm1:
> > >...
> > > git-netdev-all.patch
> > >...
> > > git trees
> > >...
> >
> > drivers/net/wireless/libertas/debugfs.c contains:
> > #define item_addr(n) ((u32) &((wlan_adapter *)0)->n)
> >
> > This is wrong on 64bit architectures.
>
> Is OK - it is simply yet another reimplementation of offsetof(). Hint.
Perhaps something like?
Against 2.6.21-rc3-mm2
From: Tony Breeds <tony@bakeyournoodle.com>
Cleanup drivers/net/wireless/libertas/debugfs.c to use standard kernel macros and functions.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
---
only compile tested on x86
debugfs.c | 41 ++++-------------------------------------
1 file changed, 4 insertions(+), 37 deletions(-)
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 3ad1e03..51dfd20 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -1772,8 +1772,8 @@ void libertas_debugfs_remove_one(wlan_private *priv)
/* debug entry */
-#define item_size(n) (sizeof ((wlan_adapter *)0)->n)
-#define item_addr(n) ((u32) &((wlan_adapter *)0)->n)
+#define item_size(n) (FIELD_SIZEOF(wlan_adapter, n))
+#define item_addr(n) (offsetof(wlan_adapter, n))
struct debug_data {
char name[32];
@@ -1789,40 +1789,7 @@ static struct debug_data items[] = {
{"psstate", item_size(psstate), item_addr(psstate)},
};
-static int num_of_items = sizeof(items) / sizeof(items[0]);
-
-/**
- * @brief convert string to number
- *
- * @param s pointer to numbered string
- * @return converted number from string s
- */
-static int string_to_number(char *s)
-{
- int r = 0;
- int base = 0;
-
- if ((strncmp(s, "0x", 2) == 0) || (strncmp(s, "0X", 2) == 0))
- base = 16;
- else
- base = 10;
-
- if (base == 16)
- s += 2;
-
- for (s = s; *s != 0; s++) {
- if ((*s >= 48) && (*s <= 57))
- r = (r * base) + (*s - 48);
- else if ((*s >= 65) && (*s <= 70))
- r = (r * base) + (*s - 55);
- else if ((*s >= 97) && (*s <= 102))
- r = (r * base) + (*s - 87);
- else
- break;
- }
-
- return r;
-}
+static int num_of_items = ARRAY_SIZE(items);
/**
* @brief proc read function
@@ -1912,7 +1879,7 @@ static int wlan_debugfs_write(struct file *f, const char __user *buf,
if (!p2)
break;
p2++;
- r = string_to_number(p2);
+ r = simple_strtoul(p2, NULL, 0);
if (d[i].size == 1)
*((u8 *) d[i].addr) = (u8) r;
else if (d[i].size == 2)
Yours Tony
linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/
Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!
^ permalink raw reply related [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity
2007-03-09 2:11 ` Tony Breeds
@ 2007-03-09 14:19 ` John W. Linville
2007-03-09 17:14 ` Randy Dunlap
0 siblings, 1 reply; 48+ messages in thread
From: John W. Linville @ 2007-03-09 14:19 UTC (permalink / raw)
To: Andrew Morton, Adrian Bunk, jgarzik, linux-kernel, netdev; +Cc: linux-wireless
Probably should copy me and linux-wireless@vger.kernel.org. Other than
that, this looks fine to me. I'll queue it up shortly.
John
On Fri, Mar 09, 2007 at 01:11:46PM +1100, Tony Breeds wrote:
> On Wed, Mar 07, 2007 at 03:00:57PM -0800, Andrew Morton wrote:
> > On Wed, 7 Mar 2007 23:41:16 +0100
> > Adrian Bunk <bunk@stusta.de> wrote:
> >
> > > On Tue, Mar 06, 2007 at 12:44:08AM -0800, Andrew Morton wrote:
> > > >...
> > > > Changes since 2.6.20-rc2-mm1:
> > > >...
> > > > git-netdev-all.patch
> > > >...
> > > > git trees
> > > >...
> > >
> > > drivers/net/wireless/libertas/debugfs.c contains:
> > > #define item_addr(n) ((u32) &((wlan_adapter *)0)->n)
> > >
> > > This is wrong on 64bit architectures.
> >
> > Is OK - it is simply yet another reimplementation of offsetof(). Hint.
>
> Perhaps something like?
>
> Against 2.6.21-rc3-mm2
>
> From: Tony Breeds <tony@bakeyournoodle.com>
>
> Cleanup drivers/net/wireless/libertas/debugfs.c to use standard kernel macros and functions.
>
> Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
>
> ---
> only compile tested on x86
>
> debugfs.c | 41 ++++-------------------------------------
> 1 file changed, 4 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
> index 3ad1e03..51dfd20 100644
> --- a/drivers/net/wireless/libertas/debugfs.c
> +++ b/drivers/net/wireless/libertas/debugfs.c
> @@ -1772,8 +1772,8 @@ void libertas_debugfs_remove_one(wlan_private *priv)
>
> /* debug entry */
>
> -#define item_size(n) (sizeof ((wlan_adapter *)0)->n)
> -#define item_addr(n) ((u32) &((wlan_adapter *)0)->n)
> +#define item_size(n) (FIELD_SIZEOF(wlan_adapter, n))
> +#define item_addr(n) (offsetof(wlan_adapter, n))
>
> struct debug_data {
> char name[32];
> @@ -1789,40 +1789,7 @@ static struct debug_data items[] = {
> {"psstate", item_size(psstate), item_addr(psstate)},
> };
>
> -static int num_of_items = sizeof(items) / sizeof(items[0]);
> -
> -/**
> - * @brief convert string to number
> - *
> - * @param s pointer to numbered string
> - * @return converted number from string s
> - */
> -static int string_to_number(char *s)
> -{
> - int r = 0;
> - int base = 0;
> -
> - if ((strncmp(s, "0x", 2) == 0) || (strncmp(s, "0X", 2) == 0))
> - base = 16;
> - else
> - base = 10;
> -
> - if (base == 16)
> - s += 2;
> -
> - for (s = s; *s != 0; s++) {
> - if ((*s >= 48) && (*s <= 57))
> - r = (r * base) + (*s - 48);
> - else if ((*s >= 65) && (*s <= 70))
> - r = (r * base) + (*s - 55);
> - else if ((*s >= 97) && (*s <= 102))
> - r = (r * base) + (*s - 87);
> - else
> - break;
> - }
> -
> - return r;
> -}
> +static int num_of_items = ARRAY_SIZE(items);
>
> /**
> * @brief proc read function
> @@ -1912,7 +1879,7 @@ static int wlan_debugfs_write(struct file *f, const char __user *buf,
> if (!p2)
> break;
> p2++;
> - r = string_to_number(p2);
> + r = simple_strtoul(p2, NULL, 0);
> if (d[i].size == 1)
> *((u8 *) d[i].addr) = (u8) r;
> else if (d[i].size == 2)
> Yours Tony
>
> linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/
> Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
--
John W. Linville
linville@tuxdriver.com
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity
2007-03-09 14:19 ` John W. Linville
@ 2007-03-09 17:14 ` Randy Dunlap
2007-03-12 3:43 ` Tony Breeds
0 siblings, 1 reply; 48+ messages in thread
From: Randy Dunlap @ 2007-03-09 17:14 UTC (permalink / raw)
To: John W. Linville
Cc: Andrew Morton, Adrian Bunk, jgarzik, linux-kernel, netdev,
linux-wireless
On Fri, 9 Mar 2007 09:19:07 -0500 John W. Linville wrote:
> Probably should copy me and linux-wireless@vger.kernel.org. Other than
> that, this looks fine to me. I'll queue it up shortly.
>
> John
>
> On Fri, Mar 09, 2007 at 01:11:46PM +1100, Tony Breeds wrote:
> > On Wed, Mar 07, 2007 at 03:00:57PM -0800, Andrew Morton wrote:
> > > On Wed, 7 Mar 2007 23:41:16 +0100
> > > Adrian Bunk <bunk@stusta.de> wrote:
> > >
> > > > On Tue, Mar 06, 2007 at 12:44:08AM -0800, Andrew Morton wrote:
> > > > >...
> > > > > Changes since 2.6.20-rc2-mm1:
> > > > >...
> > > > > git-netdev-all.patch
> > > > >...
> > > > > git trees
> > > > >...
> > > >
> > > > drivers/net/wireless/libertas/debugfs.c contains:
> > > > #define item_addr(n) ((u32) &((wlan_adapter *)0)->n)
> > > >
> > > > This is wrong on 64bit architectures.
> > >
> > > Is OK - it is simply yet another reimplementation of offsetof(). Hint.
> >
> > Perhaps something like?
> >
> > Against 2.6.21-rc3-mm2
> >
> > From: Tony Breeds <tony@bakeyournoodle.com>
> >
> > Cleanup drivers/net/wireless/libertas/debugfs.c to use standard kernel macros and functions.
> >
> > Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
> >
> > ---
> > only compile tested on x86
> >
> > debugfs.c | 41 ++++-------------------------------------
> > 1 file changed, 4 insertions(+), 37 deletions(-)
> >
> > diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
> > index 3ad1e03..51dfd20 100644
> > --- a/drivers/net/wireless/libertas/debugfs.c
> > +++ b/drivers/net/wireless/libertas/debugfs.c
> > @@ -1772,8 +1772,8 @@ void libertas_debugfs_remove_one(wlan_private *priv)
> >
> > /* debug entry */
> >
> > -#define item_size(n) (sizeof ((wlan_adapter *)0)->n)
> > -#define item_addr(n) ((u32) &((wlan_adapter *)0)->n)
> > +#define item_size(n) (FIELD_SIZEOF(wlan_adapter, n))
Good to use FIELD_SIZEOF(), but in general, we prefer to use it
directly, not in yet another wrapper.
> > +#define item_addr(n) (offsetof(wlan_adapter, n))
> >
> > struct debug_data {
> > char name[32];
> > @@ -1789,40 +1789,7 @@ static struct debug_data items[] = {
> > {"psstate", item_size(psstate), item_addr(psstate)},
> > };
> >
> > -static int num_of_items = sizeof(items) / sizeof(items[0]);
> > -
> > -/**
> > - * @brief convert string to number
> > - *
> > - * @param s pointer to numbered string
> > - * @return converted number from string s
> > - */
> > -static int string_to_number(char *s)
> > -{
> > - int r = 0;
> > - int base = 0;
> > -
> > - if ((strncmp(s, "0x", 2) == 0) || (strncmp(s, "0X", 2) == 0))
> > - base = 16;
> > - else
> > - base = 10;
> > -
> > - if (base == 16)
> > - s += 2;
> > -
> > - for (s = s; *s != 0; s++) {
> > - if ((*s >= 48) && (*s <= 57))
> > - r = (r * base) + (*s - 48);
> > - else if ((*s >= 65) && (*s <= 70))
> > - r = (r * base) + (*s - 55);
> > - else if ((*s >= 97) && (*s <= 102))
> > - r = (r * base) + (*s - 87);
> > - else
> > - break;
> > - }
> > -
> > - return r;
> > -}
> > +static int num_of_items = ARRAY_SIZE(items);
> >
> > /**
> > * @brief proc read function
> > @@ -1912,7 +1879,7 @@ static int wlan_debugfs_write(struct file *f, const char __user *buf,
> > if (!p2)
> > break;
> > p2++;
> > - r = string_to_number(p2);
> > + r = simple_strtoul(p2, NULL, 0);
> > if (d[i].size == 1)
> > *((u8 *) d[i].addr) = (u8) r;
> > else if (d[i].size == 2)
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
^ permalink raw reply [flat|nested] 48+ messages in thread
* Re: 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity
2007-03-09 17:14 ` Randy Dunlap
@ 2007-03-12 3:43 ` Tony Breeds
0 siblings, 0 replies; 48+ messages in thread
From: Tony Breeds @ 2007-03-12 3:43 UTC (permalink / raw)
To: Randy Dunlap
Cc: John W. Linville, Andrew Morton, Adrian Bunk, jgarzik,
linux-kernel, netdev, linux-wireless
On Fri, Mar 09, 2007 at 09:14:29AM -0800, Randy Dunlap wrote:
> Good to use FIELD_SIZEOF(),
Thanks.
> but in general, we prefer to use it
> directly, not in yet another wrapper.
I left the item_{size,addr} in place as it seemed to make the item[]
more compact.
I'm not certain using the FIELD_SIZEOF() macro directly is a win.
From: Tony Breeds <tony@bakeyournoodle.com>
Cleanup drivers/net/wireless/libertas/debugfs.c to use standard kernel macros and functions.
Signed-off-by: Tony Breeds <tony@bakeyournoodle.com>
---
only compile tested on x86
drivers/net/wireless/libertas/debugfs.c | 56 +++++++------------------------
1 files changed, 12 insertions(+), 44 deletions(-)
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 3ad1e03..8b0e3ec 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -1771,58 +1771,26 @@ void libertas_debugfs_remove_one(wlan_private *priv)
}
/* debug entry */
-
-#define item_size(n) (sizeof ((wlan_adapter *)0)->n)
-#define item_addr(n) ((u32) &((wlan_adapter *)0)->n)
-
struct debug_data {
char name[32];
u32 size;
u32 addr;
};
-/* To debug any member of wlan_adapter, simply add one line here.
- */
+/* To debug any member of wlan_adapter, simply add a record here. */
static struct debug_data items[] = {
- {"intcounter", item_size(intcounter), item_addr(intcounter)},
- {"psmode", item_size(psmode), item_addr(psmode)},
- {"psstate", item_size(psstate), item_addr(psstate)},
+ { .name = "intcounter",
+ .size = FIELD_SIZEOF(wlan_adapter, intcounter),
+ .addr = offsetof(wlan_adapter, intcounter) },
+ { .name = "psmode",
+ .size = FIELD_SIZEOF(wlan_adapter, psmode),
+ .addr = offsetof(wlan_adapter, psmode) },
+ { .name = "psstate",
+ .size = FIELD_SIZEOF(wlan_adapter, psstate),
+ .addr = offsetof(wlan_adapter, psstate) },
};
-static int num_of_items = sizeof(items) / sizeof(items[0]);
-
-/**
- * @brief convert string to number
- *
- * @param s pointer to numbered string
- * @return converted number from string s
- */
-static int string_to_number(char *s)
-{
- int r = 0;
- int base = 0;
-
- if ((strncmp(s, "0x", 2) == 0) || (strncmp(s, "0X", 2) == 0))
- base = 16;
- else
- base = 10;
-
- if (base == 16)
- s += 2;
-
- for (s = s; *s != 0; s++) {
- if ((*s >= 48) && (*s <= 57))
- r = (r * base) + (*s - 48);
- else if ((*s >= 65) && (*s <= 70))
- r = (r * base) + (*s - 55);
- else if ((*s >= 97) && (*s <= 102))
- r = (r * base) + (*s - 87);
- else
- break;
- }
-
- return r;
-}
+static int num_of_items = ARRAY_SIZE(items);
/**
* @brief proc read function
@@ -1912,7 +1880,7 @@ static int wlan_debugfs_write(struct file *f, const char __user *buf,
if (!p2)
break;
p2++;
- r = string_to_number(p2);
+ r = simple_strtoul(p2, NULL, 0);
if (d[i].size == 1)
*((u8 *) d[i].addr) = (u8) r;
else if (d[i].size == 2)
Yours Tony
linux.conf.au http://linux.conf.au/ || http://lca2008.linux.org.au/
Jan 28 - Feb 02 2008 The Australian Linux Technical Conference!
^ permalink raw reply related [flat|nested] 48+ messages in thread
* [-mm patch] remove mmc_deselect_cards()
2007-03-08 5:47 ` Pierre Ossman
@ 2007-03-19 9:21 ` Adrian Bunk
0 siblings, 0 replies; 48+ messages in thread
From: Adrian Bunk @ 2007-03-19 9:21 UTC (permalink / raw)
To: Pierre Ossman; +Cc: Andrew Morton, linux-kernel
On Thu, Mar 08, 2007 at 06:47:48AM +0100, Pierre Ossman wrote:
> Adrian Bunk wrote:
> > On Tue, Mar 06, 2007 at 12:44:08AM -0800, Andrew Morton wrote:
> >> ...
> >> Changes since 2.6.20-rc2-mm1:
> >> ...
> >> git-mmc.patch
> >> ...
> >> git trees
> >> ...
> >
> > mmc_deselect_cards() is no longer used.
> >
> > Signed-off-by: Adrian Bunk <bunk@stusta.de>
> >
>
> Indeed, but it's probably better to just remove it rather than have old crud
> lying around.
>
> Rgds
Updated patch below.
cu
Adrian
<-- snip -->
mmc_deselect_cards() is no longer used.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/mmc/core/mmc_ops.c | 5 -----
drivers/mmc/core/mmc_ops.h | 1 -
2 files changed, 6 deletions(-)
--- linux-2.6.21-rc3-mm2/drivers/mmc/core/mmc_ops.h.old 2007-03-09 09:01:13.000000000 +0100
+++ linux-2.6.21-rc3-mm2/drivers/mmc/core/mmc_ops.h 2007-03-09 09:01:18.000000000 +0100
@@ -13,7 +13,6 @@
#define _MMC_MMC_OPS_H
int mmc_select_card(struct mmc_card *card);
-int mmc_deselect_cards(struct mmc_host *host);
int mmc_go_idle(struct mmc_host *host);
int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr);
int mmc_all_send_cid(struct mmc_host *host, u32 *cid);
--- linux-2.6.21-rc3-mm2/drivers/mmc/core/mmc_ops.c.old 2007-03-09 09:01:24.000000000 +0100
+++ linux-2.6.21-rc3-mm2/drivers/mmc/core/mmc_ops.c 2007-03-09 09:01:34.000000000 +0100
@@ -53,11 +53,6 @@
return _mmc_select_card(card->host, card);
}
-int mmc_deselect_cards(struct mmc_host *host)
-{
- return _mmc_select_card(host, NULL);
-}
-
int mmc_go_idle(struct mmc_host *host)
{
int err;
^ permalink raw reply [flat|nested] 48+ messages in thread
end of thread, other threads:[~2007-03-19 9:21 UTC | newest]
Thread overview: 48+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-03-06 8:44 2.6.21-rc2-mm2 Andrew Morton
2007-03-06 9:06 ` 2.6.21-rc2-mm2 J.A. Magallón
2007-03-06 9:15 ` 2.6.21-rc2-mm2 Andrew Morton
2007-03-06 9:38 ` 2.6.21-rc2-mm2 J.A. Magallón
2007-03-06 9:42 ` 2.6.21-rc2-mm2 Andrew Morton
2007-03-06 9:44 ` 2.6.21-rc2-mm2 J.A. Magallón
2007-03-06 11:14 ` 2.6.21-rc2-mm2 Jens Axboe
2007-03-06 10:27 ` 2.6.21-rc2-mm2 KAMEZAWA Hiroyuki
2007-03-06 11:09 ` 2.6.21-rc2-mm2 Andrew Morton
2007-03-06 11:35 ` 2.6.21-rc2-mm2 KAMEZAWA Hiroyuki
2007-03-07 6:23 ` [BUGFIX][PATCH] fix NULL pointer in ia64/irq_chip-mask/unmask function KAMEZAWA Hiroyuki
2007-03-07 6:57 ` Andrew Morton
2007-03-07 7:32 ` KAMEZAWA Hiroyuki
2007-03-08 8:41 ` 2.6.21-rc2-mm2 Magnus Damm
2007-03-06 11:58 ` 2.6.21-rc2-mm2 Con Kolivas
2007-03-06 12:52 ` 2.6.21-rc2-mm2 Thomas Gleixner
2007-03-06 13:24 ` 2.6.21-rc2-mm2 Con Kolivas
2007-03-06 14:47 ` 2.6.21-rc2-mm2 Thomas Gleixner
2007-03-06 20:19 ` 2.6.21-rc2-mm2 Con Kolivas
2007-03-06 15:46 ` 2.6.21-rc2-mm2 J.A. Magallón
2007-03-07 6:24 ` 2.6.21-rc2-mm2 Jean Delvare
2007-03-07 8:39 ` 2.6.21-rc2-mm2 Sébastien Dugué
2007-03-07 8:49 ` 2.6.21-rc2-mm2 Andrew Morton
2007-03-07 9:30 ` 2.6.21-rc2-mm2 Sébastien Dugué
2007-03-07 19:46 ` 2.6.21-rc2-mm2 Luiz Fernando N. Capitulino
2007-03-07 19:52 ` 2.6.21-rc2-mm2 Andrew Morton
2007-03-08 7:20 ` 2.6.21-rc2-mm2 Mike Galbraith
2007-03-07 22:12 ` 2.6.21-rc2-mm2 hang Dave Hansen
2007-03-07 22:46 ` Andrew Morton
[not found] ` <20070307221628.GD26473@linux-os.sc.intel.com>
2007-03-07 23:07 ` Dave Hansen
2007-03-07 23:16 ` Andrew Morton
2007-03-08 15:07 ` Michal Piotrowski
2007-03-08 1:07 ` Siddha, Suresh B
2007-03-07 22:41 ` [RFC: -mm patch] #if 0 mmc_deselect_cards() Adrian Bunk
2007-03-08 5:47 ` Pierre Ossman
2007-03-19 9:21 ` [-mm patch] remove mmc_deselect_cards() Adrian Bunk
2007-03-08 6:31 ` MMC: Fix typo in mmc highspeed Kyungmin Park
2007-03-07 22:41 ` 2.6.21-rc2-mm2: drivers/net/wireless/libertas/debugfs.c addr bogosity Adrian Bunk
2007-03-07 23:00 ` Andrew Morton
2007-03-08 8:02 ` Adrian Bunk
2007-03-09 2:11 ` Tony Breeds
2007-03-09 14:19 ` John W. Linville
2007-03-09 17:14 ` Randy Dunlap
2007-03-12 3:43 ` Tony Breeds
2007-03-08 0:03 ` e1000 oops on boot [Re: 2.6.21-rc2-mm2] J.A. Magallón
2007-03-08 0:23 ` Andrew Morton
2007-03-08 0:28 ` Randy Dunlap
2007-03-08 0:35 ` Kok, Auke
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).