LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH UPDATED] fix typo in drivers/block/Kconfig
@ 2007-03-25  1:39 Patrick Ringl
  0 siblings, 0 replies; 2+ messages in thread
From: Patrick Ringl @ 2007-03-25  1:39 UTC (permalink / raw)
  To: linux-kernel; +Cc: torvalds, axboe

[-- Attachment #1: Type: text/plain, Size: 927 bytes --]

Hello,

[ ... Fixed two minor typos. ...]

The following patch is against 2.6.21-rc4:


--- linux-2.6.20-o/drivers/block/Kconfig	2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig	2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
  	default "16"
  	depends on BLK_DEV_RAM
  	help
-	  The default value is 16 RAM disks. Change this if you know what
+	  The default value is 16 RAM disks. Change this if you know what you
  	  are doing. If you boot from a filesystem that needs to be extracted
  	  in memory, you will need at least one RAM disk (e.g. root on cramfs).

@@ -393,7 +393,7 @@
  	default "4096"
  	help
  	  The default value is 4096 kilobytes. Only change this if you know
-	  what are you doing. If you are using IBM S/390, then set this to
+	  what you are doing. If you are using IBM S/390, then set this to
  	  8192.

  config BLK_DEV_RAM_BLOCKSIZE




---

regards,
Patrick





[-- Attachment #2: drivers_block_amount-of-ram-disks_typo_fix2 --]
[-- Type: text/plain, Size: 801 bytes --]

--- linux-2.6.20-o/drivers/block/Kconfig	2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig	2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
 	default "16"
 	depends on BLK_DEV_RAM
 	help
-	  The default value is 16 RAM disks. Change this if you know what
+	  The default value is 16 RAM disks. Change this if you know what you
 	  are doing. If you boot from a filesystem that needs to be extracted
 	  in memory, you will need at least one RAM disk (e.g. root on cramfs).
 
@@ -393,7 +393,7 @@
 	default "4096"
 	help
 	  The default value is 4096 kilobytes. Only change this if you know
-	  what are you doing. If you are using IBM S/390, then set this to
+	  what you are doing. If you are using IBM S/390, then set this to
 	  8192.
 
 config BLK_DEV_RAM_BLOCKSIZE

^ permalink raw reply	[flat|nested] 2+ messages in thread
* [PATCH UPDATED] fix typo in drivers/block/Kconfig
@ 2007-03-27 19:31 Patrick Ringl
  0 siblings, 0 replies; 2+ messages in thread
From: Patrick Ringl @ 2007-03-27 19:31 UTC (permalink / raw)
  To: linux-kernel; +Cc: torvalds, jens.axboe

[-- Attachment #1: Type: text/plain, Size: 964 bytes --]

Hello,

[ ... Fixed two minor typos. ...]

The following patch (it's also attached tho) is against 2.6.21-rc5 :


--- linux-2.6.20-o/drivers/block/Kconfig	2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig	2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
   	default "16"
   	depends on BLK_DEV_RAM
   	help
-	  The default value is 16 RAM disks. Change this if you know what
+	  The default value is 16 RAM disks. Change this if you know what you
   	  are doing. If you boot from a filesystem that needs to be extracted
   	  in memory, you will need at least one RAM disk (e.g. root on cramfs).

@@ -393,7 +393,7 @@
   	default "4096"
   	help
   	  The default value is 4096 kilobytes. Only change this if you know
-	  what are you doing. If you are using IBM S/390, then set this to
+	  what you are doing. If you are using IBM S/390, then set this to
   	  8192.

   config BLK_DEV_RAM_BLOCKSIZE




---

regards,
Patrick






[-- Attachment #2: drivers_block_amount-of-ram-disks_typo_fix2 --]
[-- Type: text/plain, Size: 802 bytes --]

--- linux-2.6.20-o/drivers/block/Kconfig	2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig	2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
 	default "16"
 	depends on BLK_DEV_RAM
 	help
-	  The default value is 16 RAM disks. Change this if you know what
+	  The default value is 16 RAM disks. Change this if you know what you
 	  are doing. If you boot from a filesystem that needs to be extracted
 	  in memory, you will need at least one RAM disk (e.g. root on cramfs).
 
@@ -393,7 +393,7 @@
 	default "4096"
 	help
 	  The default value is 4096 kilobytes. Only change this if you know
-	  what are you doing. If you are using IBM S/390, then set this to
+	  what you are doing. If you are using IBM S/390, then set this to
 	  8192.
 
 config BLK_DEV_RAM_BLOCKSIZE


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2007-03-27 19:31 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-03-25  1:39 [PATCH UPDATED] fix typo in drivers/block/Kconfig Patrick Ringl
2007-03-27 19:31 Patrick Ringl

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).