LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Sergei Shtylyov <sshtylyov@ru.mvista.com>
To: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode
Date: Fri, 20 Apr 2007 22:00:27 +0400	[thread overview]
Message-ID: <4628FFBB.2090900@ru.mvista.com> (raw)
In-Reply-To: <4628D64B.7080500@ru.mvista.com>

Hello, I wrote:

>>>> Index: b/drivers/ide/pci/hpt366.c
>>>> ===================================================================
>>>> --- a/drivers/ide/pci/hpt366.c
>>>> +++ b/drivers/ide/pci/hpt366.c
>>>> @@ -513,43 +513,31 @@ static int check_in_drive_list(ide_drive
>>>>      return 0;
>>>>  }
>>>>  
>>>> -static u8 hpt3xx_ratemask(ide_drive_t *drive)
>>>> -{
>>>> -    struct hpt_info *info    = pci_get_drvdata(HWIF(drive)->pci_dev);
>>>> -    u8 mode            = info->max_mode;
>>>> -
>>>> -    if (!eighty_ninty_three(drive) && mode)
>>>> -        mode = min(mode, (u8)1);
>>>> -    return mode;
>>>> -}
>>>> -
>>>>  /*
>>>>   *    Note for the future; the SATA hpt37x we must set
>>>>   *    either PIO or UDMA modes 0,4,5
>>>>   */
>>>> - -static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed)
>>>> +
>>>> +static u8 hpt3xx_udma_filter(ide_drive_t *drive)
>>>>  {
>>>>      struct hpt_info *info    = pci_get_drvdata(HWIF(drive)->pci_dev);
>>>>      u8 chip_type        = info->chip_type;
>>>> -    u8 mode            = hpt3xx_ratemask(drive);
>>>> -
>>>> -    if (drive->media != ide_disk)
>>>> -        return min(speed, (u8)XFER_PIO_4);
>>>> +    u8 mode            = info->max_mode;
>>>> +    u8 mask;
>>>>  
>>>>      switch (mode) {
>>>>          case 0x04:
>>>> -            speed = min_t(u8, speed, XFER_UDMA_6);
>>>> +            mask = 0x7f;
>>>>              break;
>>>>          case 0x03:
>>>> -            speed = min_t(u8, speed, XFER_UDMA_5);
>>>> +            mask = 0x3f;
>>>>              if (chip_type >= HPT374)
>>>>                  break;
>>>>              if (!check_in_drive_list(drive, bad_ata100_5))
>>>>                  goto check_bad_ata33;
>>>>              /* fall thru */
>>>>          case 0x02:
>>>> -            speed = min_t(u8, speed, XFER_UDMA_4);
>>>> +            mask = 0x1f;
>>>>  
>>>>              /*
>>>>               * CHECK ME, Does this need to be changed to HPT374 ??
>>>> @@ -560,13 +548,13 @@ static u8 hpt3xx_ratefilter(ide_drive_t 
>>>>                  !check_in_drive_list(drive, bad_ata66_4))
>>>>                  goto check_bad_ata33;
>>>>  
>>>> -            speed = min_t(u8, speed, XFER_UDMA_3);

  Hm, found a buglet in my former filtering rewrite -- the condition in the preceding if stmt should be a reverse one, and speed limitation to XFER_UDMA_3 should have been left under it.  With the current code, XFER_UDMA_2 limitation wouldn't have been applied if the same drive is not in both 'bad_ata66_4' and 'bad_ata66_3' lists -- this, however, actually is not the case since WDC AC310200R drive is in both these lists (maybe I wrote it this way because of this fact :-).

>>>> +            mask = 0x0f;
>>>>              if (HPT366_ALLOW_ATA66_3 &&
>>>>                  !check_in_drive_list(drive, bad_ata66_3))
>>>>                  goto check_bad_ata33;
>>>>              /* fall thru */
>>>>          case 0x01:
>>>> -            speed = min_t(u8, speed, XFER_UDMA_2);
>>>> +            mask = 0x07;
>>>>  
>>>>          check_bad_ata33:
>>>>              if (chip_type >= HPT370A)

>>>   This case 0x01 will *never* be hit for HPT370 chip with the new 
>>> code, therefore the filter won't get applied.

>>   Oh, and for HPT36x chips used with 40c cable too (unless they're 
>> artificaially reduced to UltraDMA/33 by the driver #define's).

>   It will still get applied since the code always resorts to looking up 
> the 'bad_ata33' list for HPT36x/370.
> I've got a bit muddled in my own code -- not sure if it got much clearer 
> after I'd untangled hpt3xx_ratemask() / hpt3xx_ratefilter() puzzle. :-)

  Yeah, I'm definitely having trouble understanding my own code after some months have passed... :-/

MBR, Sergei


  reply	other threads:[~2007-04-20 17:59 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-03 13:53 [PATCH 11/15] ide: make ide_hwif_t.ide_dma_{host_off,off_quietly} void Bartlomiej Zolnierkiewicz
2007-02-03 13:53 ` [PATCH 12/15] ide: make ide_hwif_t.ide_dma_host_on void Bartlomiej Zolnierkiewicz
2007-02-19 22:20   ` Olaf Hering
2007-02-19 23:21     ` Bartlomiej Zolnierkiewicz
2007-02-03 13:53 ` [PATCH 13/15] ide: fix UDMA/MWDMA/SWDMA masks Bartlomiej Zolnierkiewicz
2007-02-03 13:53 ` [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode Bartlomiej Zolnierkiewicz
2007-04-19 19:31   ` Sergei Shtylyov
2007-04-19 19:41     ` Sergei Shtylyov
2007-04-19 19:46       ` Sergei Shtylyov
2007-04-20 15:03       ` Sergei Shtylyov
2007-04-20 18:00         ` Sergei Shtylyov [this message]
2007-04-23 22:25           ` Bartlomiej Zolnierkiewicz
  -- strict thread matches above, loose matches on Subject: below --
2007-01-19  0:30 [PATCH 0/15] IDE quilt tree updated Bartlomiej Zolnierkiewicz
2007-01-19  0:32 ` [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode Bartlomiej Zolnierkiewicz
2007-01-22 19:48   ` Sergei Shtylyov
     [not found]     ` <58cb370e0702021207o435f39cdsf3abb0d55829fc45@mail.gmail.com>
2007-02-02 23:57       ` Bartlomiej Zolnierkiewicz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4628FFBB.2090900@ru.mvista.com \
    --to=sshtylyov@ru.mvista.com \
    --cc=bzolnier@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: [PATCH 14/15] ide: rework the code for selecting the best DMA transfer mode' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).