LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* kernel oops after unloading nf_conntrack_netbios_ns_module
@ 2007-05-10  9:06 Gabor Burjan
  2007-05-10 10:34 ` Andrew Morton
  0 siblings, 1 reply; 6+ messages in thread
From: Gabor Burjan @ 2007-05-10  9:06 UTC (permalink / raw)
  To: linux-kernel

Hi,

[1.] One line summary of the problem:

Kernel oops after unloading nf_conntrack_netbios_ns module

[2.] Full description of the problem/report:

After I remove the netbios-ns conntrack module,the kernel runs into an oops
when it tries to delete the appropriate conntrack entry.  The problem is
reproducable, see the script below [7.].  My system has a Core2Duo processon,
probably this problem is SMP related problem.

[3.] Keywords (i.e., modules, networking, kernel):

modules, networking, netfilter, conntrack, netbios

[4.] Kernel information
[4.1.] Kernel version (from /proc/version):

Linux version 2.6.20-1-686 (Debian 2.6.20-3) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Apr 24 21:52:11 UTC 2007

[4.2.] Kernel .config file:

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.20
# Tue Apr 24 20:29:26 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
# CONFIG_IKCONFIG is not set
CONFIG_CPUSETS=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_LSF=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_PARAVIRT=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
CONFIG_M686=y
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_BKL is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=m
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m

#
# Firmware Drivers
#
CONFIG_EDD=m
CONFIG_EFI_VARS=m
CONFIG_DELL_RBU=m
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_EFI=y
CONFIG_IRQBALANCE=y
CONFIG_BOOT_IOREMAP=y
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION=""
CONFIG_SUSPEND_SMP=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=m
CONFIG_ACPI_SBS=m

#
# APM (Advanced Power Management) BIOS Support
#
CONFIG_APM=m
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
# CONFIG_APM_DO_ENABLE is not set
# CONFIG_APM_CPU_IDLE is not set
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_RTC_IS_GMT is not set
# CONFIG_APM_ALLOW_INTS is not set
# CONFIG_APM_REAL_MODE_POWER_OFF is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
CONFIG_X86_SPEEDSTEP_CENTRINO=m
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
CONFIG_SCx200=m
CONFIG_SCx200HR_TIMER=m
CONFIG_K8_NB=y

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
# CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_MISC=m

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=m
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m
CONFIG_IP_ROUTE_MULTIPATH_DRR=m
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_DEFAULT_BIC=y
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="bic"
# CONFIG_TCP_MD5SIG is not set

#
# IP: Virtual Server Configuration
#
CONFIG_IP_VS=m
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12

#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y

#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m

#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# DECnet: Netfilter Configuration
#
CONFIG_DECNET_NF_GRABULATOR=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_ULOG=m

#
# DCCP Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
CONFIG_IP_DCCP_ACKVEC=y

#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
CONFIG_IP_DCCP_CCID3=m
CONFIG_IP_DCCP_TFRC_LIB=m
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y

#
# TIPC Configuration (EXPERIMENTAL)
#
CONFIG_TIPC=m
CONFIG_TIPC_ADVANCED=y
CONFIG_TIPC_ZONES=3
CONFIG_TIPC_CLUSTERS=1
CONFIG_TIPC_NODES=255
CONFIG_TIPC_SLAVE_NODES=0
CONFIG_TIPC_PORTS=8191
CONFIG_TIPC_LOG=0
# CONFIG_TIPC_DEBUG is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
# CONFIG_ATM_CLIP_NO_ICMP is not set
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
CONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not set
CONFIG_LLC=y
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
CONFIG_DEV_APPLETALK=m
CONFIG_LTPC=m
# CONFIG_COPS is not set
CONFIG_IPDDP=m
CONFIG_IPDDP_ENCAP=y
CONFIG_IPDDP_DECAP=y
CONFIG_X25=m
CONFIG_LAPB=m
CONFIG_ECONET=m
CONFIG_ECONET_AUNUDP=y
CONFIG_ECONET_NATIVE=y
CONFIG_WAN_ROUTER=m

#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_FIFO=y
CONFIG_NET_SCH_CLK_JIFFIES=y
# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set
# CONFIG_NET_SCH_CLK_CPU is not set

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_ATM=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_CLS_IND=y
CONFIG_NET_ESTIMATOR=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
CONFIG_HAMRADIO=y

#
# Packet Radio protocols
#
CONFIG_AX25=m
# CONFIG_AX25_DAMA_SLAVE is not set
CONFIG_NETROM=m
CONFIG_ROSE=m

#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_SCC=m
# CONFIG_SCC_DELAY is not set
# CONFIG_SCC_TRXECHO is not set
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m

#
# Old SIR device drivers
#

#
# Old Serial dongle support
#

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_CMTP=m
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y
CONFIG_FIB_RULES=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=m

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set

#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLKDEVS=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
CONFIG_NFTL_RW=y
CONFIG_INFTL=m
CONFIG_RFD_FTL=m
CONFIG_SSFDC=m

#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_CFI_UTIL=m
CONFIG_MTD_RAM=m
CONFIG_MTD_ROM=m
CONFIG_MTD_ABSENT=m
# CONFIG_MTD_OBSOLETE_CHIPS is not set

#
# Mapping drivers for chip access
#
CONFIG_MTD_COMPLEX_MAPPINGS=y
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_TS5500=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_SCx200_DOCFLASH=m
# CONFIG_MTD_AMD76XROM is not set
# CONFIG_MTD_ICHXROM is not set
# CONFIG_MTD_ESB2ROM is not set
# CONFIG_MTD_CK804XROM is not set
# CONFIG_MTD_SCB2_FLASH is not set
CONFIG_MTD_NETtel=m
CONFIG_MTD_DILNETPC=m
CONFIG_MTD_DILNETPC_BOOTSIZE=0x80000
# CONFIG_MTD_L440GX is not set
CONFIG_MTD_PCI=m
CONFIG_MTD_PLATRAM=m

#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
CONFIG_MTD_SLRAM=m
CONFIG_MTD_PHRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLOCK2MTD=m

#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOC2001PLUS=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCECC=m
# CONFIG_MTD_DOCPROBE_ADVANCED is not set
CONFIG_MTD_DOCPROBE_ADDRESS=0

#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=m
CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set
CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set
CONFIG_MTD_NAND_CAFE=m
CONFIG_MTD_NAND_CS553X=m
# CONFIG_MTD_NAND_NANDSIM is not set

#
# OneNAND Flash Device Drivers
#
CONFIG_MTD_ONENAND=m
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
# CONFIG_MTD_ONENAND_OTP is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not set
CONFIG_PARPORT_AX88796=m
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m

#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m

#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not set
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
CONFIG_ATA_OVER_ETH=m

#
# Misc devices
#
CONFIG_IBM_ASM=m
CONFIG_SGI_IOC4=m
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
CONFIG_MSI_LAPTOP=m

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
CONFIG_BLK_DEV_OPTI621=m
CONFIG_BLK_DEV_RZ1000=m
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
CONFIG_BLK_DEV_ALI15X3=m
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=m
CONFIG_BLK_DEV_ATIIXP=m
CONFIG_BLK_DEV_CMD64X=m
CONFIG_BLK_DEV_TRIFLEX=m
CONFIG_BLK_DEV_CY82C693=m
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_CS5530=m
CONFIG_BLK_DEV_CS5535=m
CONFIG_BLK_DEV_HPT34X=m
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=m
CONFIG_BLK_DEV_JMICRON=m
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=m
CONFIG_BLK_DEV_IT821X=m
CONFIG_BLK_DEV_NS87415=m
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_SVWKS=m
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=m
CONFIG_BLK_DEV_SLC90E66=m
CONFIG_BLK_DEV_TRM290=m
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set

#
# SCSI low-level drivers
#
CONFIG_ISCSI_TCP=m
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_3W_9XXX=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=8
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_AIC79XX=m
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
CONFIG_AIC79XX_ENABLE_RD_STRM=y
CONFIG_AIC79XX_DEBUG_ENABLE=y
CONFIG_AIC79XX_DEBUG_MASK=0
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_ARCMSR=m
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_MEGARAID_LEGACY=m
CONFIG_MEGARAID_SAS=m
CONFIG_SCSI_HPTIOP=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_STEX=m
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not set
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_QLA_FC=m
CONFIG_SCSI_QLA_ISCSI=m
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_SEAGATE is not set
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC395x=m
CONFIG_SCSI_DC390T=m
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_TAGGED_QUEUE=y
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
CONFIG_SCSI_SRP=m

#
# PCMCIA SCSI adapter support
#
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
CONFIG_PCMCIA_SYM53C500=m

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=m
CONFIG_SATA_SVW=m
CONFIG_ATA_PIIX=m
CONFIG_SATA_MV=m
CONFIG_SATA_NV=m
CONFIG_PDC_ADMA=m
CONFIG_SATA_QSTOR=m
CONFIG_SATA_PROMISE=m
CONFIG_SATA_SX4=m
CONFIG_SATA_SIL=m
CONFIG_SATA_SIL24=m
CONFIG_SATA_SIS=m
CONFIG_SATA_ULI=m
CONFIG_SATA_VIA=m
CONFIG_SATA_VITESSE=m
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=m
CONFIG_ATA_GENERIC=m
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_ISAPNP=m
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
CONFIG_PATA_LEGACY=m
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MARVELL=m
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
CONFIG_PATA_PCMCIA=m
CONFIG_PATA_PDC_OLD=m
CONFIG_PATA_QDI=m
CONFIG_PATA_RADISYS=m
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
CONFIG_PATA_WINBOND=m
CONFIG_PATA_WINBOND_VLB=m

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_AZTCD=m
CONFIG_GSCD=m
CONFIG_MCDX=m
CONFIG_OPTCD=m
CONFIG_SJCD=m
CONFIG_ISP16_CDI=m
CONFIG_CDU535=m

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
CONFIG_DM_MULTIPATH_EMC=m

#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y
# CONFIG_IEEE1394_EXPORT_FULL_API is not set

#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m

#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_NET_SB1000=m

#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m

#
# PHY device support
#
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_FIXED_PHY=m
# CONFIG_FIXED_MII_10_FDX is not set
# CONFIG_FIXED_MII_100_FDX is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_CASSINI=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_SMC9194=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI52=m
CONFIG_NI65=m

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_SEEQ8005=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_PCNET32_NAPI=y
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_ADAPTEC_STARFIRE_NAPI=y
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_FORCEDETH=m
CONFIG_CS89x0=m
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
CONFIG_8139TOO_PIO=y
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_VIA_RHINE_NAPI=y
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_R8169_NAPI=y
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
CONFIG_SKY2=m
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m

#
# Ethernet (10000 Mbit)
#
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_IXGB=m
CONFIG_IXGB_NAPI=y
CONFIG_S2IO=m
CONFIG_S2IO_NAPI=y
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m

#
# Token Ring devices
#
CONFIG_TR=y
CONFIG_IBMTR=m
CONFIG_IBMOL=m
CONFIG_IBMLS=m
# CONFIG_3C359 is not set
CONFIG_TMS380TR=m
CONFIG_TMSPCI=m
CONFIG_SKISA=m
CONFIG_PROTEON=m
CONFIG_ABYSS=m
# CONFIG_SMCTR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y

#
# Obsolete Wireless cards support (pre-802.11)
#
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_WAVELAN=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_NETWAVE=m

#
# Wireless 802.11 Frequency Hopping cards support
#
CONFIG_PCMCIA_RAYCS=m

#
# Wireless 802.11b ISA/PCI cards support
#
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not set
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
# CONFIG_IPW2200_RADIOTAP is not set
# CONFIG_IPW2200_PROMISCUOUS is not set
CONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m

#
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_PCMCIA_WL3501=m

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_NET_WIRELESS=y

#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_PCMCIA_IBMTR=m

#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=m
CONFIG_HDLC_RAW_ETH=m
CONFIG_HDLC_CISCO=m
CONFIG_HDLC_FR=m
CONFIG_HDLC_PPP=m
CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_PC300=m
CONFIG_PC300_MLPPP=y

#
# Cyclades-PC300 MLPPP support is disabled.
#

#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=m
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not set

#
# ATM drivers
#
CONFIG_ATM_DUMMY=m
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not set
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
# CONFIG_ATM_FORE200E_USE_TASKLET is not set
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
CONFIG_ATM_HE=m
CONFIG_ATM_HE_USE_SUNI=y
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
# CONFIG_ROADRUNNER_LARGE_RINGS is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
CONFIG_NET_FC=y
CONFIG_SHAPER=m
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
CONFIG_ISDN=m

#
# Old ISDN4Linux
#
CONFIG_ISDN_I4L=m
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_IPPP_FILTER=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y

#
# ISDN feature submodules
#
# CONFIG_ISDN_DIVERSION is not set

#
# ISDN4Linux hardware drivers
#

#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m

#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8

#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set

#
# HiSax PCMCIA card service modules
#
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_TELES_CS=m

#
# HiSax sub driver modules
#
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_HFCUSB=m
CONFIG_HISAX_HFC4S8S=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_HDLC=y

#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m

#
# Siemens Gigaset
#
CONFIG_ISDN_DRV_GIGASET=m
CONFIG_GIGASET_BASE=m
CONFIG_GIGASET_M105=m
# CONFIG_GIGASET_DEBUG is not set
# CONFIG_GIGASET_UNDOCREQ is not set

#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m

#
# CAPI hardware drivers
#

#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m

#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m

#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
# CONFIG_MOUSE_ATIXL is not set
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_MOUSE_VSXXXAA=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_WISTRON_BTNS=m
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
CONFIG_MOXA_SMARTIO=m
CONFIG_MOXA_SMARTIO_NEW=m
# CONFIG_ISI is not set
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_SYNCLINK_GT=m
CONFIG_N_HDLC=m
# CONFIG_SPECIALIX is not set
CONFIG_SX=m
# CONFIG_RIO is not set
CONFIG_STALDRV=y

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=16
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_FOURPORT=m
CONFIG_SERIAL_8250_ACCENT=m
CONFIG_SERIAL_8250_BOCA=m
CONFIG_SERIAL_8250_EXAR_ST16C554=m
CONFIG_SERIAL_8250_HUB6=m
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_TIPAR=m

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m

#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_ALIM1535_WDT=m
CONFIG_ALIM7101_WDT=m
CONFIG_SC520_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_IBMASR=m
CONFIG_WAFER_WDT=m
CONFIG_I6300ESB_WDT=m
CONFIG_I8XX_TCO=m
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
CONFIG_SC1200_WDT=m
CONFIG_SCx200_WDT=m
CONFIG_PC87413_WDT=m
CONFIG_60XX_WDT=m
CONFIG_SBC8360_WDT=m
CONFIG_CPU5_WDT=m
CONFIG_SMSC37B787_WDT=m
CONFIG_W83627HF_WDT=m
CONFIG_W83697HF_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_W83977F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_SBC_EPX_C3_WATCHDOG=m

#
# ISA-based Watchdog Cards
#
CONFIG_PCWATCHDOG=m
CONFIG_MIXCOMWD=m
CONFIG_WDT=m
CONFIG_WDT_501=y

#
# PCI-based Watchdog Cards
#
CONFIG_PCIPCWATCHDOG=m
CONFIG_WDTPCI=m
CONFIG_WDT_501_PCI=y

#
# USB-based Watchdog Cards
#
CONFIG_USBPCWATCHDOG=m
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m

#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_PC8736x_GPIO=m
CONFIG_NSC_GPIO=m
CONFIG_CS5535_GPIO=m
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
CONFIG_TELCLOCK=m

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_ISA=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m

#
# SPI Protocol Masters
#

#
# Dallas's 1-wire bus
#
CONFIG_W1=m
CONFIG_W1_CON=y

#
# 1-wire Bus Masters
#
CONFIG_W1_MASTER_MATROX=m
CONFIG_W1_MASTER_DS2490=m
CONFIG_W1_MASTER_DS2482=m

#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
CONFIG_W1_SLAVE_SMEM=m
CONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y

#
# Video Capture Adapters
#

#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_TVAUDIO=m
CONFIG_VIDEO_TDA7432=m
CONFIG_VIDEO_TDA9840=m
CONFIG_VIDEO_TDA9875=m
CONFIG_VIDEO_TEA6415C=m
CONFIG_VIDEO_TEA6420=m
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_BT819=m
CONFIG_VIDEO_BT856=m
CONFIG_VIDEO_KS0127=m
CONFIG_VIDEO_OV7670=m
CONFIG_VIDEO_SAA7110=m
CONFIG_VIDEO_SAA7111=m
CONFIG_VIDEO_SAA7114=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
CONFIG_VIDEO_VPX3220=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
CONFIG_VIDEO_SAA7185=m
CONFIG_VIDEO_ADV7170=m
CONFIG_VIDEO_ADV7175=m
CONFIG_VIDEO_VIVI=m
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_BT848_DVB=y
CONFIG_VIDEO_SAA6588=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_CPIA2=m
CONFIG_VIDEO_SAA5246A=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN_ZR36060=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_DC30=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZORAN_LML33R10=m
CONFIG_VIDEO_ZORAN_AVS6EYES=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
CONFIG_VIDEO_SAA7134_ALSA=m
CONFIG_VIDEO_SAA7134_OSS=m
CONFIG_VIDEO_SAA7134_DVB=m
CONFIG_VIDEO_MXB=m
CONFIG_VIDEO_DPC=m
CONFIG_VIDEO_HEXIUM_ORION=m
CONFIG_VIDEO_HEXIUM_GEMINI=m
CONFIG_VIDEO_CX88=m
CONFIG_VIDEO_CX88_ALSA=m
CONFIG_VIDEO_CX88_BLACKBIRD=m
CONFIG_VIDEO_CX88_DVB=m
CONFIG_VIDEO_CX88_VP3054=m
CONFIG_VIDEO_CAFE_CCIC=m

#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_29XXX=y
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_USBVISION=m
CONFIG_VIDEO_USBVIDEO=m
CONFIG_USB_VICAM=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_QUICKCAM_MESSENGER=m
CONFIG_USB_ET61X251=m
CONFIG_VIDEO_OVCAMCHIP=m
# CONFIG_USB_W9968CF is not set
CONFIG_USB_OV511=m
CONFIG_USB_SE401=m
CONFIG_USB_SN9C102=m
CONFIG_USB_STV680=m
CONFIG_USB_ZC0301=m
CONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not set

#
# Radio Adapters
#
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_SF16FMR2=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m
CONFIG_USB_DSBR=m

#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y

#
# Supported SAA7146 based PCI Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
CONFIG_DVB_BUDGET=m
CONFIG_DVB_BUDGET_CI=m
CONFIG_DVB_BUDGET_AV=m
CONFIG_DVB_BUDGET_PATCH=m

#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
CONFIG_DVB_USB_A800=m
CONFIG_DVB_USB_DIBUSB_MB=m
CONFIG_DVB_USB_DIBUSB_MB_FAULTY=y
CONFIG_DVB_USB_DIBUSB_MC=m
CONFIG_DVB_USB_DIB0700=m
CONFIG_DVB_USB_UMT_010=m
CONFIG_DVB_USB_CXUSB=m
CONFIG_DVB_USB_DIGITV=m
CONFIG_DVB_USB_VP7045=m
CONFIG_DVB_USB_VP702X=m
CONFIG_DVB_USB_GP8PSK=m
CONFIG_DVB_USB_NOVA_T_USB2=m
CONFIG_DVB_USB_TTUSB2=m
CONFIG_DVB_USB_DTT200U=m
CONFIG_DVB_TTUSB_BUDGET=m
CONFIG_DVB_TTUSB_DEC=m
CONFIG_DVB_CINERGYT2=m
# CONFIG_DVB_CINERGYT2_TUNING is not set

#
# Supported FlexCopII (B2C2) Adapters
#
CONFIG_DVB_B2C2_FLEXCOP=m
CONFIG_DVB_B2C2_FLEXCOP_PCI=m
CONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_DEBUG is not set

#
# Supported BT878 Adapters
#
CONFIG_DVB_BT8XX=m

#
# Supported Pluto2 Adapters
#
CONFIG_DVB_PLUTO2=m

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# DVB-S (satellite) frontends
#
CONFIG_DVB_STV0299=m
CONFIG_DVB_CX24110=m
CONFIG_DVB_CX24123=m
CONFIG_DVB_TDA8083=m
CONFIG_DVB_MT312=m
CONFIG_DVB_VES1X93=m
CONFIG_DVB_S5H1420=m
CONFIG_DVB_TDA10086=m

#
# DVB-T (terrestrial) frontends
#
CONFIG_DVB_SP8870=m
CONFIG_DVB_SP887X=m
CONFIG_DVB_CX22700=m
CONFIG_DVB_CX22702=m
CONFIG_DVB_L64781=m
CONFIG_DVB_TDA1004X=m
CONFIG_DVB_NXT6000=m
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m

#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
CONFIG_DVB_TDA10021=m
CONFIG_DVB_STV0297=m

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
CONFIG_DVB_NXT200X=m
CONFIG_DVB_OR51211=m
CONFIG_DVB_OR51132=m
CONFIG_DVB_BCM3510=m
CONFIG_DVB_LGDT330X=m

#
# Tuners/PLL support
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TDA826X=m
CONFIG_DVB_TUNER_MT2060=m
CONFIG_DVB_TUNER_LGH06XF=m

#
# Miscellaneous devices
#
CONFIG_DVB_LNBP21=m
CONFIG_DVB_ISL6421=m
CONFIG_DVB_TUA6100=m
CONFIG_VIDEO_SAA7146=m
CONFIG_VIDEO_SAA7146_VV=m
CONFIG_VIDEO_VIDEOBUF=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_BUF=m
CONFIG_VIDEO_BUF_DVB=m
CONFIG_VIDEO_BTCX=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_ARC=m
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
# CONFIG_FB_IMAC is not set
CONFIG_FB_HGA=m
# CONFIG_FB_HGA_ACCEL is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_RIVA is not set
CONFIG_FB_I810=m
# CONFIG_FB_I810_GTF is not set
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
CONFIG_FB_3DFX=m
# CONFIG_FB_3DFX_ACCEL is not set
CONFIG_FB_VOODOO1=m
CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
CONFIG_FB_GEODE=y
CONFIG_FB_GEODE_GX=m
# CONFIG_FB_GEODE_GX_SET_FBSIZE is not set
CONFIG_FB_GEODE_GX1=m
CONFIG_FB_VIRTUAL=m

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_DEVICE=y
# CONFIG_LCD_CLASS_DEVICE is not set

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_OPL4_LIB=m
CONFIG_SND_VX_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_MTS64=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# ISA devices
#
CONFIG_SND_AD1848_LIB=m
CONFIG_SND_CS4231_LIB=m
CONFIG_SND_ADLIB=m
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
CONFIG_SND_DT019X=m
CONFIG_SND_ES968=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_GUS_SYNTH=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_MIRO=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_SGALAXY=m
CONFIG_SND_SSCAPE=m
CONFIG_SND_WAVEFRONT=m

#
# PCI devices
#
CONFIG_SND_AD1889=m
CONFIG_SND_ALS300=m
CONFIG_SND_ALS4000=m
CONFIG_SND_ALI5451=m
CONFIG_SND_ATIIXP=m
CONFIG_SND_ATIIXP_MODEM=m
CONFIG_SND_AU8810=m
CONFIG_SND_AU8820=m
CONFIG_SND_AU8830=m
CONFIG_SND_AZT3328=m
CONFIG_SND_BT87X=m
# CONFIG_SND_BT87X_OVERCLOCK is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS5535AUDIO=m
CONFIG_SND_DARLA20=m
CONFIG_SND_GINA20=m
CONFIG_SND_LAYLA20=m
CONFIG_SND_DARLA24=m
CONFIG_SND_GINA24=m
CONFIG_SND_LAYLA24=m
CONFIG_SND_MONA=m
CONFIG_SND_MIA=m
CONFIG_SND_ECHO3G=m
CONFIG_SND_INDIGO=m
CONFIG_SND_INDIGOIO=m
CONFIG_SND_INDIGODJ=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_FM801=m
CONFIG_SND_FM801_TEA575X_BOOL=y
CONFIG_SND_FM801_TEA575X=m
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDSP=m
CONFIG_SND_HDSPM=m
CONFIG_SND_ICE1712=m
CONFIG_SND_ICE1724=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
CONFIG_SND_KORG1212=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_MIXART=m
CONFIG_SND_NM256=m
CONFIG_SND_PCXHR=m
CONFIG_SND_RIPTIDE=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
CONFIG_SND_VX222=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_AC97_POWER_SAVE=y

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m

#
# PCMCIA devices
#
CONFIG_SND_VXPOCKET=m
CONFIG_SND_PDAUDIOCF=m

#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_BT878=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=m
CONFIG_MIDI_VIA82CXXX=y
CONFIG_SOUND_OSS=m
# CONFIG_SOUND_TRACEINIT is not set
# CONFIG_SOUND_DMAP is not set
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
CONFIG_SOUND_SB=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
# CONFIG_AEDSP16_SBPRO is not set
# CONFIG_AEDSP16_MPU401 is not set
CONFIG_SOUND_TVMIXER=m
CONFIG_SOUND_KAHLUA=m
CONFIG_AC97_BUS=m

#
# HID Devices
#
CONFIG_HID=m

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT_POWERBOOK=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_TOUCHSCREEN_DMC_TSC10=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_WHITEHEAT is not set
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_SISUSBVGA=m
CONFIG_USB_SISUSBVGA_CON=y
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_TEST=m

#
# USB DSL modem support
#
CONFIG_USB_ATM=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_CXACRU=m
CONFIG_USB_UEAGLEATM=m
CONFIG_USB_XUSBATM=m

#
# USB Gadget Support
#
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m

#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m

#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
CONFIG_LEDS_NET48XX=m
CONFIG_LEDS_WRAP=m

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=m

#
# InfiniBand support
#
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
CONFIG_INFINIBAND_AMSO1100=m
# CONFIG_INFINIBAND_AMSO1100_DEBUG is not set
CONFIG_INFINIBAND_IPOIB=m
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
CONFIG_INFINIBAND_SRP=m
CONFIG_INFINIBAND_ISER=m

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=m

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_AMD76X=m
CONFIG_EDAC_E7XXX=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82875P=m
CONFIG_EDAC_I82860=m
CONFIG_EDAC_R82600=m
CONFIG_EDAC_POLL=y

#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set

#
# RTC drivers
#
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_RS5C348=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_TEST is not set
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_V3020=m

#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m

#
# Virtualization
#
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
CONFIG_MINIX_FS=m
CONFIG_ROMFS_FS=m
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=m
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_ECRYPT_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_SUMMARY is not set
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_FS_POSIX_ACL=y
CONFIG_JFFS2_FS_SECURITY=y
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
CONFIG_VXFS_FS=m
CONFIG_HPFS_FS=m
CONFIG_QNX4FS_FS=m
CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
# CONFIG_NCPFS_SMALLDOS is not set
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_CODA_FS=m
# CONFIG_CODA_FS_OLD_API is not set
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
CONFIG_9P_FS=m

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m

#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_TCP=y
# CONFIG_DLM_SCTP is not set
CONFIG_DLM_DEBUG=y

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_SECURITY_SELINUX_DISABLE=y
CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#
CONFIG_CRYPTO_DEV_PADLOCK=m
CONFIG_CRYPTO_DEV_PADLOCK_AES=m
CONFIG_CRYPTO_DEV_PADLOCK_SHA=m
CONFIG_CRYPTO_DEV_GEODE=m

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_REED_SOLOMON=m
CONFIG_REED_SOLOMON_DEC16=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_IOMAP_COPY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y

[5.] Most recent kernel version which did not have the bug:

Debian 2.6.18-4 (ip_conntrack_netbios_ns module)

[6.] Output of Oops.. message (if applicable) with symbolic information
     resolved (see Documentation/oops-tracing.txt)


ksymoops 2.4.11 on i686 2.6.20-1-686.  Options used
     -V (default)
     -k /proc/ksyms (default)
     -l /proc/modules (default)
     -o /lib/modules/2.6.20-1-686/ (default)
     -m /boot/System.map-2.6.20-1-686 (specified)

Error (regular_file): read_ksyms stat /proc/ksyms failed
No modules in ksyms, skipping objects
No ksyms, skipping lsmod
BUG: unable to handle kernel paging request at virtual address f898b9ec
f89ea20c
*pde = 02100067
Oops: 0000 [#1]
CPU:    0
EIP:    0060:[<f89ea20c>]    Not tainted VLI
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00010282   (2.6.20-1-686 #1)
eax: f898b980   ebx: c21d7194   ecx: c21d7194   edx: 00000000
esi: c21d7270   edi: f89e9823   ebp: 00000000   esp: c0337f1c
ds: 007b   es: 007b   ss: 0068
Stack: c23ed140 00000000 f89ea2d8 c23ed140 c0389b00 f89e98a2 00000100 c0128a66
      00000000 c010613e c01465a2 c01082ee c0337f4c c0337f4c 00000021 c032ff48
      0000000a c012538a 00000046 00000000 c0336008 00000008 c0125433 00000000
Call Trace:
[<f89ea2d8>] destroy_conntrack+0x11e/0x127 [nf_conntrack]
[<f89e98a2>] death_by_timeout+0x7f/0x81 [nf_conntrack]
[<c0128a66>] run_timer_softirq+0x107/0x170
[<c010613e>] timer_interrupt+0x65/0x6b
[<c01465a2>] handle_IRQ_event+0x23/0x51
[<c01082ee>] sched_clock+0x3f/0x59
[<c012538a>] __do_softirq+0x66/0xcc
[<c0125433>] do_softirq+0x43/0x51
[<c0113b95>] smp_apic_timer_interrupt+0x74/0x7f
[<c0103800>] apic_timer_interrupt+0x28/0x30
[<c0101240>] mwait_idle_with_hints+0x3b/0x3f
[<c01013af>] cpu_idle+0xb0/0xc9
[<c033b7b1>] start_kernel+0x3f7/0x3ff
[<c033b1b8>] unknown_bootoption+0x0/0x202
Code: 74 19 8b 43 68 f6 c4 02 75 11 89 d9 ba 04 00 00 00 b8 e4 6e 9f f8 e8 10 22 74 c7 f0 0f ba 6b 68 09 85 f6 74 11 8b 06 85 c0 74 0b <8b> 50 6c 85 d2 74 04 89 d8 ff d2 0f b7 43 52 ba 40 66 9f f8 66


>>EIP; f89ea20c <END_OF_CODE+3863e20c/????>   <=====

>>esp; c0337f1c <init_thread_union+1f1c/2000>

Trace; f89ea2d8 <END_OF_CODE+3863e2d8/????>
Trace; f89e98a2 <END_OF_CODE+3863d8a2/????>
Trace; c0128a66 <run_timer_softirq+107/170>
Trace; c010613e <timer_interrupt+65/6b>
Trace; c01465a2 <handle_IRQ_event+23/51>
Trace; c01082ee <sched_clock+3f/59>
Trace; c012538a <__do_softirq+66/cc>
Trace; c0125433 <do_softirq+43/51>
Trace; c0113b95 <smp_apic_timer_interrupt+74/7f>
Trace; c0103800 <apic_timer_interrupt+28/30>
Trace; c0101240 <mwait_idle_with_hints+3b/3f>
Trace; c01013af <cpu_idle+b0/c9>
Trace; c033b7b1 <start_kernel+3f7/3ff>
Trace; c033b1b8 <unknown_bootoption+0/202>

This architecture has variable length instructions, decoding before eip
is unreliable, take these instructions with a pinch of salt.

Code;  f89ea1e1 <END_OF_CODE+3863e1e1/????>
00000000 <_EIP>:
Code;  f89ea1e1 <END_OF_CODE+3863e1e1/????>
   0:   74 19                     je     1b <_EIP+0x1b>
Code;  f89ea1e3 <END_OF_CODE+3863e1e3/????>
   2:   8b 43 68                  mov    0x68(%ebx),%eax
Code;  f89ea1e6 <END_OF_CODE+3863e1e6/????>
   5:   f6 c4 02                  test   $0x2,%ah
Code;  f89ea1e9 <END_OF_CODE+3863e1e9/????>
   8:   75 11                     jne    1b <_EIP+0x1b>
Code;  f89ea1eb <END_OF_CODE+3863e1eb/????>
   a:   89 d9                     mov    %ebx,%ecx
Code;  f89ea1ed <END_OF_CODE+3863e1ed/????>
   c:   ba 04 00 00 00            mov    $0x4,%edx
Code;  f89ea1f2 <END_OF_CODE+3863e1f2/????>
  11:   b8 e4 6e 9f f8            mov    $0xf89f6ee4,%eax
Code;  f89ea1f7 <END_OF_CODE+3863e1f7/????>
  16:   e8 10 22 74 c7            call   c774222b <_EIP+0xc774222b>
Code;  f89ea1fc <END_OF_CODE+3863e1fc/????>
  1b:   f0 0f ba 6b 68 09         lock btsl $0x9,0x68(%ebx)
Code;  f89ea202 <END_OF_CODE+3863e202/????>
  21:   85 f6                     test   %esi,%esi
Code;  f89ea204 <END_OF_CODE+3863e204/????>
  23:   74 11                     je     36 <_EIP+0x36>
Code;  f89ea206 <END_OF_CODE+3863e206/????>
  25:   8b 06                     mov    (%esi),%eax
Code;  f89ea208 <END_OF_CODE+3863e208/????>
  27:   85 c0                     test   %eax,%eax
Code;  f89ea20a <END_OF_CODE+3863e20a/????>
  29:   74 0b                     je     36 <_EIP+0x36>

This decode from eip onwards should be reliable

Code;  f89ea20c <END_OF_CODE+3863e20c/????>
00000000 <_EIP>:
Code;  f89ea20c <END_OF_CODE+3863e20c/????>   <=====
   0:   8b 50 6c                  mov    0x6c(%eax),%edx   <=====
Code;  f89ea20f <END_OF_CODE+3863e20f/????>
   3:   85 d2                     test   %edx,%edx
Code;  f89ea211 <END_OF_CODE+3863e211/????>
   5:   74 04                     je     b <_EIP+0xb>
Code;  f89ea213 <END_OF_CODE+3863e213/????>
   7:   89 d8                     mov    %ebx,%eax
Code;  f89ea215 <END_OF_CODE+3863e215/????>
   9:   ff d2                     call   *%edx
Code;  f89ea217 <END_OF_CODE+3863e217/????>
   b:   0f b7 43 52               movzwl 0x52(%ebx),%eax
Code;  f89ea21b <END_OF_CODE+3863e21b/????>
   f:   ba 40 66 9f f8            mov    $0xf89f6640,%edx
Code;  f89ea220 <END_OF_CODE+3863e220/????>
  14:   66                        data16

EIP: [<f89ea20c>] destroy_conntrack+0x52/0x127 [nf_conntrack] SS:ESP 0068:c0337f1c
<0>Kernel panic - not syncing: Fatal exception in interrupt
[<c01118de>] smp_call_function+0x66/0x10b
[<c0121778>] printk+0x1b/0x1f
[<c011199e>] smp_send_stop+0x1b/0x36
[<c0120d2b>] panic+0x54/0xf5
[<c01041dc>] die+0x205/0x239
[<c0119363>] do_page_fault+0x45e/0x53b
[<c0118f05>] do_page_fault+0x0/0x53b
[<c02999ac>] error_code+0x7c/0x84
[<f89e9823>] death_by_timeout+0x0/0x81 [nf_conntrack]
[<f89ea20c>] destroy_conntrack+0x52/0x127 [nf_conntrack]
[<f89ea2d8>] destroy_conntrack+0x11e/0x127 [nf_conntrack]
[<f89e98a2>] death_by_timeout+0x7f/0x81 [nf_conntrack]
[<c0128a66>] run_timer_softirq+0x107/0x170
[<c010613e>] timer_interrupt+0x65/0x6b
[<c01465a2>] handle_IRQ_event+0x23/0x51
[<c01082ee>] sched_clock+0x3f/0x59
[<c012538a>] __do_softirq+0x66/0xcc
[<c0125433>] do_softirq+0x43/0x51
[<c0113b95>] smp_apic_timer_interrupt+0x74/0x7f
[<c0103800>] apic_timer_interrupt+0x28/0x30
[<c0101240>] mwait_idle_with_hints+0x3b/0x3f
[<c01013af>] cpu_idle+0xb0/0xc9
[<c033b7b1>] start_kernel+0x3f7/0x3ff
[<c033b1b8>] unknown_bootoption+0x0/0x202
Warning (Oops_read): Code line not seen, dumping what data is available


>>EIP; f89ea20c <END_OF_CODE+3863e20c/????>   <=====


1 warning and 1 error issued.  Results may not be reliable.


[7.] A small shell script or example program which triggers the
     problem (if possible)

after booting with init=/bin/sh (clean environment)

<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
#!/bin/sh -x

ifconfig eth0 <ip> netmask <netmask>

sleep 5

modprobe nf_conntrack_netbios_ns

sleep 3

iptables -F
iptables -P INPUT DROP
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -P OUTPUT ACCEPT

sleep 3

nmblookup <existing_netbios_name>
cat /proc/net/ip_conntrack

sleep 3

rmmod nf_conntrack_netbios_ns

watch -n 1 cat /proc/net/ip_conntrack
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>

[8.] Environment
[8.1.] Software (add the output of the ver_linux script here)

If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
 
 Linux duplo 2.6.20-1-686 #1 SMP Tue Apr 24 21:52:11 UTC 2007 i686 GNU/Linux
  
  Gnu C                  4.1.3
  Gnu make               3.81
  binutils               Binutils
  util-linux             2.12r
  mount                  2.12r
  module-init-tools      3.3-pre2
  e2fsprogs              1.40-WIP
  Linux C Library        > libc.2.5
  Dynamic linker (ldd)   2.5
  Procps                 3.2.7
  Net-tools              1.60
  Kbd                    85:
  Sh-utils               5.97
  udev                   105
  Modules Loaded         nf_conntrack_ipv4 xt_state iptable_filter ip_tables x_tables nf_conntrack_netbios_ns nf_conntrack nfnetlink ext3 jbd mbcache dm_mirror dm_snapshot dm_mod raid10 raid456 xor raid1 raid0 multipath linear md_mod ide_cd cdrom sd_mod ata_generic usbhid hid ata_piix libata scsi_mod piix floppy ehci_hcd uhci_hcd generic ide_core e1000 usbcore thermal processor fan

[8.2.] Processor information (from /proc/cpuinfo):

processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz
stepping        : 6
cpu MHz         : 2128.070
cache size      : 2048 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 4259.22
clflush size    : 64

processor       : 1
vendor_id       : GenuineIntel
cpu family      : 6
model           : 15
model name      : Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz
stepping        : 6
cpu MHz         : 2128.070
cache size      : 2048 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
fdiv_bug        : no
hlt_bug         : no
f00f_bug        : no
coma_bug        : no
fpu             : yes
fpu_exception   : yes
cpuid level     : 10
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips        : 4256.21
clflush size    : 64

[8.3.] Module information (from /proc/modules):

Module                  Size  Used by
nf_conntrack_ipv4      17772  1 
xt_state                2560  1 
iptable_filter          3072  1 
ip_tables              12324  1 iptable_filter
x_tables               14628  2 xt_state,ip_tables
nf_conntrack_netbios_ns     3168  0 
nf_conntrack           58440  3 nf_conntrack_ipv4,xt_state,nf_conntrack_netbios_ns
nfnetlink               6648  2 nf_conntrack_ipv4,nf_conntrack
ext3                  121032  1 
jbd                    55368  1 ext3
mbcache                 8420  1 ext3
dm_mirror              20340  0 
dm_snapshot            16580  0 
dm_mod                 52812  2 dm_mirror,dm_snapshot
raid10                 22656  0 
raid456               119568  0 
xor                    14504  1 raid456
raid1                  22144  0 
raid0                   8096  0 
multipath               8576  0 
linear                  5984  0 
md_mod                 71860  6 raid10,raid456,raid1,raid0,multipath,linear
ide_cd                 36672  0 
cdrom                  32960  1 ide_cd
sd_mod                 19968  2 
ata_generic             7876  0 
usbhid                 23136  0 
hid                    22784  1 usbhid
ata_piix               13860  1 
libata                100052  2 ata_generic,ata_piix
scsi_mod              133100  2 sd_mod,libata
piix                    9540  0 [permanent]
floppy                 54468  0 
ehci_hcd               29132  0 
uhci_hcd               22160  0 
generic                 4932  0 [permanent]
ide_core              114728  3 ide_cd,piix,generic
e1000                 113376  0 
usbcore               122312  4 usbhid,ehci_hcd,uhci_hcd
thermal                13928  0 
processor              30536  1 thermal
fan                     4772  0 

[8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)

/proc/ioports:

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:1f.1
01f0-01f7 : 0000:00:1f.1
  01f0-01f7 : ide0
0290-0297 : pnp 00:08
0376-0376 : 0000:00:1f.1
03c0-03df : vga+
03f2-03f5 : floppy
03f6-03f6 : 0000:00:1f.1
  03f6-03f6 : ide0
03f7-03f7 : floppy DIR
03f8-03ff : serial
0400-041f : 0000:00:1f.3
  0410-0415 : ACPI CPU throttle
0480-04bf : 0000:00:1f.0
0800-087f : 0000:00:1f.0
  0800-0803 : ACPI PM1a_EVT_BLK
  0804-0805 : ACPI PM1a_CNT_BLK
  0808-080b : ACPI PM_TMR
  0820-0820 : ACPI PM2_CNT_BLK
  0828-082f : ACPI GPE0_BLK
0cf8-0cff : PCI conf1
8000-801f : 0000:00:1d.0
  8000-801f : uhci_hcd
8400-841f : 0000:00:1d.1
  8400-841f : uhci_hcd
8800-881f : 0000:00:1d.2
  8800-881f : uhci_hcd
9000-901f : 0000:00:1d.3
  9000-901f : uhci_hcd
9400-940f : 0000:00:1f.2
  9400-940f : libata
9800-9803 : 0000:00:1f.2
  9800-9803 : libata
a000-a007 : 0000:00:1f.2
  a000-a007 : libata
a400-a403 : 0000:00:1f.2
  a400-a403 : libata
a800-a807 : 0000:00:1f.2
  a800-a807 : libata
b000-bfff : PCI Bus #01
c000-cfff : PCI Bus #02
  c800-c81f : 0000:02:00.0
    c800-c81f : e1000
d000-dfff : PCI Bus #03
e000-efff : PCI Bus #04
ffa0-ffaf : 0000:00:1f.1
  ffa0-ffa7 : ide0
  ffa8-ffaf : ide1

iomem:

00000000-0009fbff : System RAM
  00000000-00000000 : Crash kernel
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cefff : Video ROM
000f0000-000fffff : System ROM
00100000-7ff9ffff : System RAM
  00100000-0029a5e4 : Kernel code
  0029a5e5-003353b3 : Kernel data
7ffa0000-7ffadfff : ACPI Tables
7ffae000-7ffdffff : ACPI Non-volatile Storage
7ffe0000-7fffffff : reserved
cddf8000-cddfbfff : 0000:00:1b.0
cddffc00-cddfffff : 0000:00:1d.7
  cddffc00-cddfffff : ehci_hcd
cde00000-cdefffff : PCI Bus #02
  cdee0000-cdefffff : 0000:02:00.0
    cdee0000-cdefffff : e1000
cdf00000-cfffffff : PCI Bus #04
  cdfe0000-cdffffff : 0000:04:00.0
  ce000000-ceffffff : 0000:04:00.0
  cf000000-cfffffff : 0000:04:00.0
d0000000-dfffffff : PCI Bus #04
  d0000000-dfffffff : 0000:04:00.0
ffb80000-ffffffff : reserved

[8.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
	Subsystem: ASUSTeK Computer Inc. Unknown device 817a
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information

00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: cdf00000-cfffffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
	Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
		Address: fee0300c  Data: 41b9
	Capabilities: [a0] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <64ns, L1 <1us
		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2
		Link: Latency L0s <256ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x16
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
		Slot: Number 0, PowerLimit 75.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Off, PwrInd On, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-

00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
	Subsystem: ASUSTeK Computer Inc. Unknown device 8237
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: Memory at cddf8000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [70] Express Unknown type IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <64ns, L1 <1us
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
		Link: Latency L0s <64ns, L1 <1us
		Link: ASPM Disabled CommClk- ExtSynch-
		Link: Speed unknown, Width x0

00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Express Root Port (Slot+) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
		Link: Latency L0s <256ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x0
		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
		Slot: Number 1, PowerLimit 10.000000
		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
		Slot: AttnInd Unknown, PwrInd Unknown, Power-
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
		Address: fee0300c  Data: 41c1
	Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: cde00000-cdefffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [40] Express Root Port (Slot-) IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s unlimited, L1 unlimited
		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
		Link: Latency L0s <256ns, L1 <4us
		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x1
		Root: Correctable- Non-Fatal- Fatal- PME-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
		Address: fee0300c  Data: 41c9
	Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 4: I/O ports at 8000 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 4: I/O ports at 8400 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 19
	Region 4: I/O ports at 8800 [size=32]

00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 20
	Region 4: I/O ports at 9000 [size=32]

00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at cddffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
	I/O behind bridge: 0000b000-0000bfff
	Memory behind bridge: fff00000-000fffff
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
	Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Unknown device 8179

00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information

00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at ffa0 [size=16]

00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: ASUSTeK Computer Inc. Unknown device 2601
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 17
	Region 0: I/O ports at a800 [size=8]
	Region 1: I/O ports at a400 [size=4]
	Region 2: I/O ports at a000 [size=8]
	Region 3: I/O ports at 9800 [size=4]
	Region 4: I/O ports at 9400 [size=16]
	Capabilities: [70] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 0
	Region 4: I/O ports at 0400 [size=32]

02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
	Subsystem: ASUSTeK Computer Inc. Unknown device 81c2
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 220
	Region 0: Memory at cdee0000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at c800 [size=32]
	Capabilities: [c8] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
		Address: 00000000fee0300c  Data: 41e9
	Capabilities: [e0] Express Endpoint IRQ 0
		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <512ns, L1 <64us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
		Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, Port 0
		Link: Latency L0s <128ns, L1 <64us
		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x1

04:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 GS (rev a1) (prog-if 00 [VGA])
	Subsystem: ASUSTeK Computer Inc. Unknown device 81f1
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0, Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at cf000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at ce000000 (64-bit, non-prefetchable) [size=16M]
	Expansion ROM at cdfe0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [78] Express Endpoint IRQ 0
		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
		Device: Latency L0s <256ns, L1 <4us
		Device: AtnBtn- AtnInd- PwrInd-
		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
		Link: Latency L0s <256ns, L1 <4us
		Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
		Link: Speed 2.5Gb/s, Width x16

[8.6.] SCSI information (from /proc/scsi/scsi)

(SATA)

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: SAMSUNG HD080HJ  Rev: ZH10
  Type:   Direct-Access                    ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
  Vendor: ATA      Model: SAMSUNG HD080HJ  Rev: ZH10
  Type:   Direct-Access                    ANSI SCSI revision: 05


buga

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: kernel oops after unloading nf_conntrack_netbios_ns_module
  2007-05-10  9:06 kernel oops after unloading nf_conntrack_netbios_ns_module Gabor Burjan
@ 2007-05-10 10:34 ` Andrew Morton
  2007-05-10 11:01   ` Gabor Burjan
  0 siblings, 1 reply; 6+ messages in thread
From: Andrew Morton @ 2007-05-10 10:34 UTC (permalink / raw)
  To: Gabor Burjan; +Cc: linux-kernel, netdev


(add netdev to cc)

On Thu, 10 May 2007 11:06:03 +0200 Gabor Burjan <buga@buvoshetes.hu> wrote:

> Hi,
> 
> [1.] One line summary of the problem:
> 
> Kernel oops after unloading nf_conntrack_netbios_ns module
> 
> [2.] Full description of the problem/report:
> 
> After I remove the netbios-ns conntrack module,the kernel runs into an oops
> when it tries to delete the appropriate conntrack entry.  The problem is
> reproducable, see the script below [7.].  My system has a Core2Duo processon,
> probably this problem is SMP related problem.
> 
> [3.] Keywords (i.e., modules, networking, kernel):
> 
> modules, networking, netfilter, conntrack, netbios
> 
> [4.] Kernel information
> [4.1.] Kernel version (from /proc/version):
> 
> Linux version 2.6.20-1-686 (Debian 2.6.20-3) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Apr 24 21:52:11 UTC 2007
> 
> [4.2.] Kernel .config file:
> 
> ...
>
> [5.] Most recent kernel version which did not have the bug:
> 
> Debian 2.6.18-4 (ip_conntrack_netbios_ns module)

So it's a regression.

> [6.] Output of Oops.. message (if applicable) with symbolic information
>      resolved (see Documentation/oops-tracing.txt)
> 
> 
> ksymoops 2.4.11 on i686 2.6.20-1-686.  Options used
>      -V (default)
>      -k /proc/ksyms (default)
>      -l /proc/modules (default)
>      -o /lib/modules/2.6.20-1-686/ (default)
>      -m /boot/System.map-2.6.20-1-686 (specified)
> 
> Error (regular_file): read_ksyms stat /proc/ksyms failed
> No modules in ksyms, skipping objects
> No ksyms, skipping lsmod
> BUG: unable to handle kernel paging request at virtual address f898b9ec
> f89ea20c
> *pde = 02100067
> Oops: 0000 [#1]
> CPU:    0
> EIP:    0060:[<f89ea20c>]    Not tainted VLI
> Using defaults from ksymoops -t elf32-i386 -a i386
> EFLAGS: 00010282   (2.6.20-1-686 #1)
> eax: f898b980   ebx: c21d7194   ecx: c21d7194   edx: 00000000
> esi: c21d7270   edi: f89e9823   ebp: 00000000   esp: c0337f1c
> ds: 007b   es: 007b   ss: 0068
> Stack: c23ed140 00000000 f89ea2d8 c23ed140 c0389b00 f89e98a2 00000100 c0128a66
>       00000000 c010613e c01465a2 c01082ee c0337f4c c0337f4c 00000021 c032ff48
>       0000000a c012538a 00000046 00000000 c0336008 00000008 c0125433 00000000
> Call Trace:
> [<f89ea2d8>] destroy_conntrack+0x11e/0x127 [nf_conntrack]
> [<f89e98a2>] death_by_timeout+0x7f/0x81 [nf_conntrack]
> [<c0128a66>] run_timer_softirq+0x107/0x170
> [<c010613e>] timer_interrupt+0x65/0x6b
> [<c01465a2>] handle_IRQ_event+0x23/0x51
> [<c01082ee>] sched_clock+0x3f/0x59
> [<c012538a>] __do_softirq+0x66/0xcc
> [<c0125433>] do_softirq+0x43/0x51
> [<c0113b95>] smp_apic_timer_interrupt+0x74/0x7f
> [<c0103800>] apic_timer_interrupt+0x28/0x30
> [<c0101240>] mwait_idle_with_hints+0x3b/0x3f
> [<c01013af>] cpu_idle+0xb0/0xc9
> [<c033b7b1>] start_kernel+0x3f7/0x3ff
> [<c033b1b8>] unknown_bootoption+0x0/0x202
> Code: 74 19 8b 43 68 f6 c4 02 75 11 89 d9 ba 04 00 00 00 b8 e4 6e 9f f8 e8 10 22 74 c7 f0 0f ba 6b 68 09 85 f6 74 11 8b 06 85 c0 74 0b <8b> 50 6c 85 d2 74 04 89 d8 ff d2 0f b7 43 52 ba 40 66 9f f8 66

ksymoops seems to have gone and hidden the actual EIP decide from us.

ksymoops is no longer necessary as long as CONFIG_KALLSYMS=y.  Are you able
to send just the raw oops message from dmesg please?


> 
> >>EIP; f89ea20c <END_OF_CODE+3863e20c/????>   <=====
> 
> >>esp; c0337f1c <init_thread_union+1f1c/2000>
> 
> Trace; f89ea2d8 <END_OF_CODE+3863e2d8/????>
> Trace; f89e98a2 <END_OF_CODE+3863d8a2/????>
> Trace; c0128a66 <run_timer_softirq+107/170>
> Trace; c010613e <timer_interrupt+65/6b>
> Trace; c01465a2 <handle_IRQ_event+23/51>
> Trace; c01082ee <sched_clock+3f/59>
> Trace; c012538a <__do_softirq+66/cc>
> Trace; c0125433 <do_softirq+43/51>
> Trace; c0113b95 <smp_apic_timer_interrupt+74/7f>
> Trace; c0103800 <apic_timer_interrupt+28/30>
> Trace; c0101240 <mwait_idle_with_hints+3b/3f>
> Trace; c01013af <cpu_idle+b0/c9>
> Trace; c033b7b1 <start_kernel+3f7/3ff>
> Trace; c033b1b8 <unknown_bootoption+0/202>
> 
> This architecture has variable length instructions, decoding before eip
> is unreliable, take these instructions with a pinch of salt.
> 
> Code;  f89ea1e1 <END_OF_CODE+3863e1e1/????>
> 00000000 <_EIP>:
> Code;  f89ea1e1 <END_OF_CODE+3863e1e1/????>
>    0:   74 19                     je     1b <_EIP+0x1b>
> Code;  f89ea1e3 <END_OF_CODE+3863e1e3/????>
>    2:   8b 43 68                  mov    0x68(%ebx),%eax
> Code;  f89ea1e6 <END_OF_CODE+3863e1e6/????>
>    5:   f6 c4 02                  test   $0x2,%ah
> Code;  f89ea1e9 <END_OF_CODE+3863e1e9/????>
>    8:   75 11                     jne    1b <_EIP+0x1b>
> Code;  f89ea1eb <END_OF_CODE+3863e1eb/????>
>    a:   89 d9                     mov    %ebx,%ecx
> Code;  f89ea1ed <END_OF_CODE+3863e1ed/????>
>    c:   ba 04 00 00 00            mov    $0x4,%edx
> Code;  f89ea1f2 <END_OF_CODE+3863e1f2/????>
>   11:   b8 e4 6e 9f f8            mov    $0xf89f6ee4,%eax
> Code;  f89ea1f7 <END_OF_CODE+3863e1f7/????>
>   16:   e8 10 22 74 c7            call   c774222b <_EIP+0xc774222b>
> Code;  f89ea1fc <END_OF_CODE+3863e1fc/????>
>   1b:   f0 0f ba 6b 68 09         lock btsl $0x9,0x68(%ebx)
> Code;  f89ea202 <END_OF_CODE+3863e202/????>
>   21:   85 f6                     test   %esi,%esi
> Code;  f89ea204 <END_OF_CODE+3863e204/????>
>   23:   74 11                     je     36 <_EIP+0x36>
> Code;  f89ea206 <END_OF_CODE+3863e206/????>
>   25:   8b 06                     mov    (%esi),%eax
> Code;  f89ea208 <END_OF_CODE+3863e208/????>
>   27:   85 c0                     test   %eax,%eax
> Code;  f89ea20a <END_OF_CODE+3863e20a/????>
>   29:   74 0b                     je     36 <_EIP+0x36>
> 
> This decode from eip onwards should be reliable
> 
> Code;  f89ea20c <END_OF_CODE+3863e20c/????>
> 00000000 <_EIP>:
> Code;  f89ea20c <END_OF_CODE+3863e20c/????>   <=====
>    0:   8b 50 6c                  mov    0x6c(%eax),%edx   <=====
> Code;  f89ea20f <END_OF_CODE+3863e20f/????>
>    3:   85 d2                     test   %edx,%edx
> Code;  f89ea211 <END_OF_CODE+3863e211/????>
>    5:   74 04                     je     b <_EIP+0xb>
> Code;  f89ea213 <END_OF_CODE+3863e213/????>
>    7:   89 d8                     mov    %ebx,%eax
> Code;  f89ea215 <END_OF_CODE+3863e215/????>
>    9:   ff d2                     call   *%edx
> Code;  f89ea217 <END_OF_CODE+3863e217/????>
>    b:   0f b7 43 52               movzwl 0x52(%ebx),%eax
> Code;  f89ea21b <END_OF_CODE+3863e21b/????>
>    f:   ba 40 66 9f f8            mov    $0xf89f6640,%edx
> Code;  f89ea220 <END_OF_CODE+3863e220/????>
>   14:   66                        data16
> 
> EIP: [<f89ea20c>] destroy_conntrack+0x52/0x127 [nf_conntrack] SS:ESP 0068:c0337f1c
> <0>Kernel panic - not syncing: Fatal exception in interrupt
> [<c01118de>] smp_call_function+0x66/0x10b
> [<c0121778>] printk+0x1b/0x1f
> [<c011199e>] smp_send_stop+0x1b/0x36
> [<c0120d2b>] panic+0x54/0xf5
> [<c01041dc>] die+0x205/0x239
> [<c0119363>] do_page_fault+0x45e/0x53b
> [<c0118f05>] do_page_fault+0x0/0x53b
> [<c02999ac>] error_code+0x7c/0x84
> [<f89e9823>] death_by_timeout+0x0/0x81 [nf_conntrack]
> [<f89ea20c>] destroy_conntrack+0x52/0x127 [nf_conntrack]
> [<f89ea2d8>] destroy_conntrack+0x11e/0x127 [nf_conntrack]
> [<f89e98a2>] death_by_timeout+0x7f/0x81 [nf_conntrack]
> [<c0128a66>] run_timer_softirq+0x107/0x170
> [<c010613e>] timer_interrupt+0x65/0x6b
> [<c01465a2>] handle_IRQ_event+0x23/0x51
> [<c01082ee>] sched_clock+0x3f/0x59
> [<c012538a>] __do_softirq+0x66/0xcc
> [<c0125433>] do_softirq+0x43/0x51
> [<c0113b95>] smp_apic_timer_interrupt+0x74/0x7f
> [<c0103800>] apic_timer_interrupt+0x28/0x30
> [<c0101240>] mwait_idle_with_hints+0x3b/0x3f
> [<c01013af>] cpu_idle+0xb0/0xc9
> [<c033b7b1>] start_kernel+0x3f7/0x3ff
> [<c033b1b8>] unknown_bootoption+0x0/0x202
> Warning (Oops_read): Code line not seen, dumping what data is available
> 
> 
> >>EIP; f89ea20c <END_OF_CODE+3863e20c/????>   <=====
> 
> 
> 1 warning and 1 error issued.  Results may not be reliable.
> 
> 
> [7.] A small shell script or example program which triggers the
>      problem (if possible)
> 
> after booting with init=/bin/sh (clean environment)
> 
> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> #!/bin/sh -x
> 
> ifconfig eth0 <ip> netmask <netmask>
> 
> sleep 5
> 
> modprobe nf_conntrack_netbios_ns
> 
> sleep 3
> 
> iptables -F
> iptables -P INPUT DROP
> iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
> iptables -P OUTPUT ACCEPT
> 
> sleep 3
> 
> nmblookup <existing_netbios_name>
> cat /proc/net/ip_conntrack
> 
> sleep 3
> 
> rmmod nf_conntrack_netbios_ns
> 
> watch -n 1 cat /proc/net/ip_conntrack
> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> 
> [8.] Environment
> [8.1.] Software (add the output of the ver_linux script here)
> 
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>  
>  Linux duplo 2.6.20-1-686 #1 SMP Tue Apr 24 21:52:11 UTC 2007 i686 GNU/Linux
>   
>   Gnu C                  4.1.3
>   Gnu make               3.81
>   binutils               Binutils
>   util-linux             2.12r
>   mount                  2.12r
>   module-init-tools      3.3-pre2
>   e2fsprogs              1.40-WIP
>   Linux C Library        > libc.2.5
>   Dynamic linker (ldd)   2.5
>   Procps                 3.2.7
>   Net-tools              1.60
>   Kbd                    85:
>   Sh-utils               5.97
>   udev                   105
>   Modules Loaded         nf_conntrack_ipv4 xt_state iptable_filter ip_tables x_tables nf_conntrack_netbios_ns nf_conntrack nfnetlink ext3 jbd mbcache dm_mirror dm_snapshot dm_mod raid10 raid456 xor raid1 raid0 multipath linear md_mod ide_cd cdrom sd_mod ata_generic usbhid hid ata_piix libata scsi_mod piix floppy ehci_hcd uhci_hcd generic ide_core e1000 usbcore thermal processor fan
> 
> [8.2.] Processor information (from /proc/cpuinfo):
> 
> processor       : 0
> vendor_id       : GenuineIntel
> cpu family      : 6
> model           : 15
> model name      : Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz
> stepping        : 6
> cpu MHz         : 2128.070
> cache size      : 2048 KB
> physical id     : 0
> siblings        : 2
> core id         : 0
> cpu cores       : 2
> fdiv_bug        : no
> hlt_bug         : no
> f00f_bug        : no
> coma_bug        : no
> fpu             : yes
> fpu_exception   : yes
> cpuid level     : 10
> wp              : yes
> flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
> bogomips        : 4259.22
> clflush size    : 64
> 
> processor       : 1
> vendor_id       : GenuineIntel
> cpu family      : 6
> model           : 15
> model name      : Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz
> stepping        : 6
> cpu MHz         : 2128.070
> cache size      : 2048 KB
> physical id     : 0
> siblings        : 2
> core id         : 1
> cpu cores       : 2
> fdiv_bug        : no
> hlt_bug         : no
> f00f_bug        : no
> coma_bug        : no
> fpu             : yes
> fpu_exception   : yes
> cpuid level     : 10
> wp              : yes
> flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
> bogomips        : 4256.21
> clflush size    : 64
> 
> [8.3.] Module information (from /proc/modules):
> 
> Module                  Size  Used by
> nf_conntrack_ipv4      17772  1 
> xt_state                2560  1 
> iptable_filter          3072  1 
> ip_tables              12324  1 iptable_filter
> x_tables               14628  2 xt_state,ip_tables
> nf_conntrack_netbios_ns     3168  0 
> nf_conntrack           58440  3 nf_conntrack_ipv4,xt_state,nf_conntrack_netbios_ns
> nfnetlink               6648  2 nf_conntrack_ipv4,nf_conntrack
> ext3                  121032  1 
> jbd                    55368  1 ext3
> mbcache                 8420  1 ext3
> dm_mirror              20340  0 
> dm_snapshot            16580  0 
> dm_mod                 52812  2 dm_mirror,dm_snapshot
> raid10                 22656  0 
> raid456               119568  0 
> xor                    14504  1 raid456
> raid1                  22144  0 
> raid0                   8096  0 
> multipath               8576  0 
> linear                  5984  0 
> md_mod                 71860  6 raid10,raid456,raid1,raid0,multipath,linear
> ide_cd                 36672  0 
> cdrom                  32960  1 ide_cd
> sd_mod                 19968  2 
> ata_generic             7876  0 
> usbhid                 23136  0 
> hid                    22784  1 usbhid
> ata_piix               13860  1 
> libata                100052  2 ata_generic,ata_piix
> scsi_mod              133100  2 sd_mod,libata
> piix                    9540  0 [permanent]
> floppy                 54468  0 
> ehci_hcd               29132  0 
> uhci_hcd               22160  0 
> generic                 4932  0 [permanent]
> ide_core              114728  3 ide_cd,piix,generic
> e1000                 113376  0 
> usbcore               122312  4 usbhid,ehci_hcd,uhci_hcd
> thermal                13928  0 
> processor              30536  1 thermal
> fan                     4772  0 
> 
> [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
> 
> /proc/ioports:
> 
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-0043 : timer0
> 0050-0053 : timer1
> 0060-006f : keyboard
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : 0000:00:1f.1
> 01f0-01f7 : 0000:00:1f.1
>   01f0-01f7 : ide0
> 0290-0297 : pnp 00:08
> 0376-0376 : 0000:00:1f.1
> 03c0-03df : vga+
> 03f2-03f5 : floppy
> 03f6-03f6 : 0000:00:1f.1
>   03f6-03f6 : ide0
> 03f7-03f7 : floppy DIR
> 03f8-03ff : serial
> 0400-041f : 0000:00:1f.3
>   0410-0415 : ACPI CPU throttle
> 0480-04bf : 0000:00:1f.0
> 0800-087f : 0000:00:1f.0
>   0800-0803 : ACPI PM1a_EVT_BLK
>   0804-0805 : ACPI PM1a_CNT_BLK
>   0808-080b : ACPI PM_TMR
>   0820-0820 : ACPI PM2_CNT_BLK
>   0828-082f : ACPI GPE0_BLK
> 0cf8-0cff : PCI conf1
> 8000-801f : 0000:00:1d.0
>   8000-801f : uhci_hcd
> 8400-841f : 0000:00:1d.1
>   8400-841f : uhci_hcd
> 8800-881f : 0000:00:1d.2
>   8800-881f : uhci_hcd
> 9000-901f : 0000:00:1d.3
>   9000-901f : uhci_hcd
> 9400-940f : 0000:00:1f.2
>   9400-940f : libata
> 9800-9803 : 0000:00:1f.2
>   9800-9803 : libata
> a000-a007 : 0000:00:1f.2
>   a000-a007 : libata
> a400-a403 : 0000:00:1f.2
>   a400-a403 : libata
> a800-a807 : 0000:00:1f.2
>   a800-a807 : libata
> b000-bfff : PCI Bus #01
> c000-cfff : PCI Bus #02
>   c800-c81f : 0000:02:00.0
>     c800-c81f : e1000
> d000-dfff : PCI Bus #03
> e000-efff : PCI Bus #04
> ffa0-ffaf : 0000:00:1f.1
>   ffa0-ffa7 : ide0
>   ffa8-ffaf : ide1
> 
> iomem:
> 
> 00000000-0009fbff : System RAM
>   00000000-00000000 : Crash kernel
> 0009fc00-0009ffff : reserved
> 000a0000-000bffff : Video RAM area
> 000c0000-000cefff : Video ROM
> 000f0000-000fffff : System ROM
> 00100000-7ff9ffff : System RAM
>   00100000-0029a5e4 : Kernel code
>   0029a5e5-003353b3 : Kernel data
> 7ffa0000-7ffadfff : ACPI Tables
> 7ffae000-7ffdffff : ACPI Non-volatile Storage
> 7ffe0000-7fffffff : reserved
> cddf8000-cddfbfff : 0000:00:1b.0
> cddffc00-cddfffff : 0000:00:1d.7
>   cddffc00-cddfffff : ehci_hcd
> cde00000-cdefffff : PCI Bus #02
>   cdee0000-cdefffff : 0000:02:00.0
>     cdee0000-cdefffff : e1000
> cdf00000-cfffffff : PCI Bus #04
>   cdfe0000-cdffffff : 0000:04:00.0
>   ce000000-ceffffff : 0000:04:00.0
>   cf000000-cfffffff : 0000:04:00.0
> d0000000-dfffffff : PCI Bus #04
>   d0000000-dfffffff : 0000:04:00.0
> ffb80000-ffffffff : reserved
> 
> [8.5.] PCI information ('lspci -vvv' as root)
> 
> 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 817a
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> 	Latency: 0
> 	Capabilities: [e0] Vendor Specific Information
> 
> 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0, Cache Line Size: 16 bytes
> 	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> 	I/O behind bridge: 0000e000-0000efff
> 	Memory behind bridge: cdf00000-cfffffff
> 	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
> 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> 	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> 	Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000
> 	Capabilities: [80] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
> 		Address: fee0300c  Data: 41b9
> 	Capabilities: [a0] Express Root Port (Slot+) IRQ 0
> 		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> 		Device: Latency L0s <64ns, L1 <1us
> 		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> 		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> 		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> 		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2
> 		Link: Latency L0s <256ns, L1 <4us
> 		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> 		Link: Speed 2.5Gb/s, Width x16
> 		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
> 		Slot: Number 0, PowerLimit 75.000000
> 		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> 		Slot: AttnInd Off, PwrInd On, Power-
> 		Root: Correctable- Non-Fatal- Fatal- PME-
> 
> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 8237
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0, Cache Line Size: 16 bytes
> 	Interrupt: pin A routed to IRQ 5
> 	Region 0: Memory at cddf8000 (64-bit, non-prefetchable) [size=16K]
> 	Capabilities: [50] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
> 		Address: 0000000000000000  Data: 0000
> 	Capabilities: [70] Express Unknown type IRQ 0
> 		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> 		Device: Latency L0s <64ns, L1 <1us
> 		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> 		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> 		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
> 		Link: Latency L0s <64ns, L1 <1us
> 		Link: ASPM Disabled CommClk- ExtSynch-
> 		Link: Speed unknown, Width x0
> 
> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0, Cache Line Size: 16 bytes
> 	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> 	I/O behind bridge: 0000d000-0000dfff
> 	Memory behind bridge: fff00000-000fffff
> 	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> 	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> 	Capabilities: [40] Express Root Port (Slot+) IRQ 0
> 		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> 		Device: Latency L0s unlimited, L1 unlimited
> 		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> 		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> 		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> 		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
> 		Link: Latency L0s <256ns, L1 <4us
> 		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> 		Link: Speed 2.5Gb/s, Width x0
> 		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
> 		Slot: Number 1, PowerLimit 10.000000
> 		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> 		Slot: AttnInd Unknown, PwrInd Unknown, Power-
> 		Root: Correctable- Non-Fatal- Fatal- PME-
> 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
> 		Address: fee0300c  Data: 41c1
> 	Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 	Capabilities: [a0] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0, Cache Line Size: 16 bytes
> 	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> 	I/O behind bridge: 0000c000-0000cfff
> 	Memory behind bridge: cde00000-cdefffff
> 	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> 	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> 	Capabilities: [40] Express Root Port (Slot-) IRQ 0
> 		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> 		Device: Latency L0s unlimited, L1 unlimited
> 		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> 		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> 		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> 		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
> 		Link: Latency L0s <256ns, L1 <4us
> 		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> 		Link: Speed 2.5Gb/s, Width x1
> 		Root: Correctable- Non-Fatal- Fatal- PME-
> 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
> 		Address: fee0300c  Data: 41c9
> 	Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 	Capabilities: [a0] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0
> 	Interrupt: pin A routed to IRQ 18
> 	Region 4: I/O ports at 8000 [size=32]
> 
> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0
> 	Interrupt: pin B routed to IRQ 17
> 	Region 4: I/O ports at 8400 [size=32]
> 
> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0
> 	Interrupt: pin C routed to IRQ 19
> 	Region 4: I/O ports at 8800 [size=32]
> 
> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0
> 	Interrupt: pin D routed to IRQ 20
> 	Region 4: I/O ports at 9000 [size=32]
> 
> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0
> 	Interrupt: pin A routed to IRQ 18
> 	Region 0: Memory at cddffc00 (32-bit, non-prefetchable) [size=1K]
> 	Capabilities: [50] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [58] Debug port
> 
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0
> 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> 	I/O behind bridge: 0000b000-0000bfff
> 	Memory behind bridge: fff00000-000fffff
> 	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> 	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> 	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> 	Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 
> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0
> 	Capabilities: [e0] Vendor Specific Information
> 
> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0
> 	Interrupt: pin A routed to IRQ 19
> 	Region 0: I/O ports at 01f0 [size=8]
> 	Region 1: I/O ports at 03f4 [size=1]
> 	Region 2: I/O ports at 0170 [size=8]
> 	Region 3: I/O ports at 0374 [size=1]
> 	Region 4: I/O ports at ffa0 [size=16]
> 
> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 2601
> 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0
> 	Interrupt: pin B routed to IRQ 17
> 	Region 0: I/O ports at a800 [size=8]
> 	Region 1: I/O ports at a400 [size=4]
> 	Region 2: I/O ports at a000 [size=8]
> 	Region 3: I/O ports at 9800 [size=4]
> 	Region 4: I/O ports at 9400 [size=16]
> 	Capabilities: [70] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 
> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> 	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Interrupt: pin B routed to IRQ 0
> 	Region 4: I/O ports at 0400 [size=32]
> 
> 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 81c2
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0, Cache Line Size: 64 bytes
> 	Interrupt: pin A routed to IRQ 220
> 	Region 0: Memory at cdee0000 (32-bit, non-prefetchable) [size=128K]
> 	Region 2: I/O ports at c800 [size=32]
> 	Capabilities: [c8] Power Management version 2
> 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> 		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> 	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
> 		Address: 00000000fee0300c  Data: 41e9
> 	Capabilities: [e0] Express Endpoint IRQ 0
> 		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
> 		Device: Latency L0s <512ns, L1 <64us
> 		Device: AtnBtn- AtnInd- PwrInd-
> 		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> 		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
> 		Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, Port 0
> 		Link: Latency L0s <128ns, L1 <64us
> 		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> 		Link: Speed 2.5Gb/s, Width x1
> 
> 04:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 GS (rev a1) (prog-if 00 [VGA])
> 	Subsystem: ASUSTeK Computer Inc. Unknown device 81f1
> 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> 	Latency: 0, Cache Line Size: 16 bytes
> 	Interrupt: pin A routed to IRQ 11
> 	Region 0: Memory at cf000000 (32-bit, non-prefetchable) [size=16M]
> 	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> 	Region 3: Memory at ce000000 (64-bit, non-prefetchable) [size=16M]
> 	Expansion ROM at cdfe0000 [disabled] [size=128K]
> 	Capabilities: [60] Power Management version 2
> 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> 	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
> 		Address: 0000000000000000  Data: 0000
> 	Capabilities: [78] Express Endpoint IRQ 0
> 		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> 		Device: Latency L0s <256ns, L1 <4us
> 		Device: AtnBtn- AtnInd- PwrInd-
> 		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> 		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> 		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
> 		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
> 		Link: Latency L0s <256ns, L1 <4us
> 		Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
> 		Link: Speed 2.5Gb/s, Width x16
> 
> [8.6.] SCSI information (from /proc/scsi/scsi)
> 
> (SATA)
> 
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
>   Vendor: ATA      Model: SAMSUNG HD080HJ  Rev: ZH10
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> Host: scsi1 Channel: 00 Id: 00 Lun: 00
>   Vendor: ATA      Model: SAMSUNG HD080HJ  Rev: ZH10
>   Type:   Direct-Access                    ANSI SCSI revision: 05
> 
> 
> buga
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: kernel oops after unloading nf_conntrack_netbios_ns_module
  2007-05-10 10:34 ` Andrew Morton
@ 2007-05-10 11:01   ` Gabor Burjan
  2007-05-12 15:05     ` Patrick McHardy
  0 siblings, 1 reply; 6+ messages in thread
From: Gabor Burjan @ 2007-05-10 11:01 UTC (permalink / raw)
  To: Andrew Morton; +Cc: linux-kernel, netdev

Hi,

On Thu, May 10, 2007 at 03:34:11AM -0700, Andrew Morton wrote:
> 
> (add netdev to cc)
> 
> On Thu, 10 May 2007 11:06:03 +0200 Gabor Burjan <buga@buvoshetes.hu> wrote:
> 
> > Hi,
> > 
> > [1.] One line summary of the problem:
> > 
> > Kernel oops after unloading nf_conntrack_netbios_ns module
> > 
> > [2.] Full description of the problem/report:
> > 
> > After I remove the netbios-ns conntrack module,the kernel runs into an oops
> > when it tries to delete the appropriate conntrack entry.  The problem is
> > reproducable, see the script below [7.].  My system has a Core2Duo processon,
> > probably this problem is SMP related problem.
> > 
> > [3.] Keywords (i.e., modules, networking, kernel):
> > 
> > modules, networking, netfilter, conntrack, netbios
> > 
> > [4.] Kernel information
> > [4.1.] Kernel version (from /proc/version):
> > 
> > Linux version 2.6.20-1-686 (Debian 2.6.20-3) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Tue Apr 24 21:52:11 UTC 2007
> > 
> > [4.2.] Kernel .config file:
> > 
> > ...
> >
> > [5.] Most recent kernel version which did not have the bug:
> > 
> > Debian 2.6.18-4 (ip_conntrack_netbios_ns module)
> 
> So it's a regression.
> 
> > [6.] Output of Oops.. message (if applicable) with symbolic information
> >      resolved (see Documentation/oops-tracing.txt)
> > 
> >
> > [...]
> 
> ksymoops seems to have gone and hidden the actual EIP decide from us.
> 
> ksymoops is no longer necessary as long as CONFIG_KALLSYMS=y.  Are you able
> to send just the raw oops message from dmesg please?

BUG: unable to handle kernel paging request at virtual address f898b9ec
printing eip:
f89ea20c
*pde = 02100067
*pte = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: ipt_REJECT ipt_LOG xt_tcpudp nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink iptable_filter ip_tables x_tables ext3 jbd mbcache dm_mirror dm_snapshot dm_mod raid10 raid456 xor raid1 raid0 multipath linear md_mod sd_mod ide_cd cdrom usbhid hid ata_generic ata_piix libata scsi_mod piix ehci_hcd uhci_hcd generic floppy ide_core e1000 usbcore thermal processor fan
CPU:    0
EIP:    0060:[<f89ea20c>]    Not tainted VLI
EFLAGS: 00010282   (2.6.20-1-686 #1)
EIP is at destroy_conntrack+0x52/0x127 [nf_conntrack]
eax: f898b980   ebx: c21d7194   ecx: c21d7194   edx: 00000000
esi: c21d7270   edi: f89e9823   ebp: 00000000   esp: c0337f1c
ds: 007b   es: 007b   ss: 0068
Process swapper (pid: 0, ti=c0336000 task=c030d3a0 task.ti=c0336000)
Stack: c23ed140 00000000 f89ea2d8 c23ed140 c0389b00 f89e98a2 00000100 c0128a66
      00000000 c010613e c01465a2 c01082ee c0337f4c c0337f4c 00000021 c032ff48
      0000000a c012538a 00000046 00000000 c0336008 00000008 c0125433 00000000
Call Trace:
[<f89ea2d8>] destroy_conntrack+0x11e/0x127 [nf_conntrack]
[<f89e98a2>] death_by_timeout+0x7f/0x81 [nf_conntrack]
[<c0128a66>] run_timer_softirq+0x107/0x170
[<c010613e>] timer_interrupt+0x65/0x6b
[<c01465a2>] handle_IRQ_event+0x23/0x51
[<c01082ee>] sched_clock+0x3f/0x59
[<c012538a>] __do_softirq+0x66/0xcc
[<c0125433>] do_softirq+0x43/0x51
[<c0113b95>] smp_apic_timer_interrupt+0x74/0x7f
[<c0103800>] apic_timer_interrupt+0x28/0x30
[<c0101240>] mwait_idle_with_hints+0x3b/0x3f
[<c01013af>] cpu_idle+0xb0/0xc9
[<c033b7b1>] start_kernel+0x3f7/0x3ff
[<c033b1b8>] unknown_bootoption+0x0/0x202
=======================
Code: 74 19 8b 43 68 f6 c4 02 75 11 89 d9 ba 04 00 00 00 b8 e4 6e 9f f8 e8 10 22 74 c7 f0 0f ba 6b 68 09 85 f6 74 11 8b 06 85 c0 74 0b <8b> 50 6c 85 d2 74 04 89 d8 ff d2 0f b7 43 52 ba 40 66 9f f8 66
EIP: [<f89ea20c>] destroy_conntrack+0x52/0x127 [nf_conntrack] SS:ESP 0068:c0337f1c
<0>Kernel panic - not syncing: Fatal exception in interrupt
BUG: at arch/i386/kernel/smp.c:547 smp_call_function()
[<c01118de>] smp_call_function+0x66/0x10b
[<c0121778>] printk+0x1b/0x1f
[<c011199e>] smp_send_stop+0x1b/0x36
[<c0120d2b>] panic+0x54/0xf5
[<c01041dc>] die+0x205/0x239
[<c0119363>] do_page_fault+0x45e/0x53b
[<c0118f05>] do_page_fault+0x0/0x53b
[<c02999ac>] error_code+0x7c/0x84
[<f89e9823>] death_by_timeout+0x0/0x81 [nf_conntrack]
[<f89ea20c>] destroy_conntrack+0x52/0x127 [nf_conntrack]
[<f89ea2d8>] destroy_conntrack+0x11e/0x127 [nf_conntrack]
[<f89e98a2>] death_by_timeout+0x7f/0x81 [nf_conntrack]
[<c0128a66>] run_timer_softirq+0x107/0x170
[<c010613e>] timer_interrupt+0x65/0x6b
[<c01465a2>] handle_IRQ_event+0x23/0x51
[<c01082ee>] sched_clock+0x3f/0x59
[<c012538a>] __do_softirq+0x66/0xcc
[<c0125433>] do_softirq+0x43/0x51
[<c0113b95>] smp_apic_timer_interrupt+0x74/0x7f
[<c0103800>] apic_timer_interrupt+0x28/0x30
[<c0101240>] mwait_idle_with_hints+0x3b/0x3f
[<c01013af>] cpu_idle+0xb0/0xc9
[<c033b7b1>] start_kernel+0x3f7/0x3ff
[<c033b1b8>] unknown_bootoption+0x0/0x202
======================= 

> >  [...]
> > 
> > [7.] A small shell script or example program which triggers the
> >      problem (if possible)
> > 
> > after booting with init=/bin/sh (clean environment)
> > 
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> > #!/bin/sh -x
> > 
> > ifconfig eth0 <ip> netmask <netmask>
> > 
> > sleep 5
> > 
> > modprobe nf_conntrack_netbios_ns
> > 
> > sleep 3
> > 
> > iptables -F
> > iptables -P INPUT DROP
> > iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
> > iptables -P OUTPUT ACCEPT
> > 
> > sleep 3
> > 
> > nmblookup <existing_netbios_name>
> > cat /proc/net/ip_conntrack
> > 
> > sleep 3
> > 
> > rmmod nf_conntrack_netbios_ns
> > 
> > watch -n 1 cat /proc/net/ip_conntrack
> > >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
> > 
> > [8.] Environment
> > [8.1.] Software (add the output of the ver_linux script here)
> > 
> > If some fields are empty or look unusual you may have an old version.
> > Compare to the current minimal requirements in Documentation/Changes.
> >  
> >  Linux duplo 2.6.20-1-686 #1 SMP Tue Apr 24 21:52:11 UTC 2007 i686 GNU/Linux
> >   
> >   Gnu C                  4.1.3
> >   Gnu make               3.81
> >   binutils               Binutils
> >   util-linux             2.12r
> >   mount                  2.12r
> >   module-init-tools      3.3-pre2
> >   e2fsprogs              1.40-WIP
> >   Linux C Library        > libc.2.5
> >   Dynamic linker (ldd)   2.5
> >   Procps                 3.2.7
> >   Net-tools              1.60
> >   Kbd                    85:
> >   Sh-utils               5.97
> >   udev                   105
> >   Modules Loaded         nf_conntrack_ipv4 xt_state iptable_filter ip_tables x_tables nf_conntrack_netbios_ns nf_conntrack nfnetlink ext3 jbd mbcache dm_mirror dm_snapshot dm_mod raid10 raid456 xor raid1 raid0 multipath linear md_mod ide_cd cdrom sd_mod ata_generic usbhid hid ata_piix libata scsi_mod piix floppy ehci_hcd uhci_hcd generic ide_core e1000 usbcore thermal processor fan
> > 
> > [8.2.] Processor information (from /proc/cpuinfo):
> > 
> > processor       : 0
> > vendor_id       : GenuineIntel
> > cpu family      : 6
> > model           : 15
> > model name      : Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz
> > stepping        : 6
> > cpu MHz         : 2128.070
> > cache size      : 2048 KB
> > physical id     : 0
> > siblings        : 2
> > core id         : 0
> > cpu cores       : 2
> > fdiv_bug        : no
> > hlt_bug         : no
> > f00f_bug        : no
> > coma_bug        : no
> > fpu             : yes
> > fpu_exception   : yes
> > cpuid level     : 10
> > wp              : yes
> > flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
> > bogomips        : 4259.22
> > clflush size    : 64
> > 
> > processor       : 1
> > vendor_id       : GenuineIntel
> > cpu family      : 6
> > model           : 15
> > model name      : Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz
> > stepping        : 6
> > cpu MHz         : 2128.070
> > cache size      : 2048 KB
> > physical id     : 0
> > siblings        : 2
> > core id         : 1
> > cpu cores       : 2
> > fdiv_bug        : no
> > hlt_bug         : no
> > f00f_bug        : no
> > coma_bug        : no
> > fpu             : yes
> > fpu_exception   : yes
> > cpuid level     : 10
> > wp              : yes
> > flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
> > bogomips        : 4256.21
> > clflush size    : 64
> > 
> > [8.3.] Module information (from /proc/modules):
> > 
> > Module                  Size  Used by
> > nf_conntrack_ipv4      17772  1 
> > xt_state                2560  1 
> > iptable_filter          3072  1 
> > ip_tables              12324  1 iptable_filter
> > x_tables               14628  2 xt_state,ip_tables
> > nf_conntrack_netbios_ns     3168  0 
> > nf_conntrack           58440  3 nf_conntrack_ipv4,xt_state,nf_conntrack_netbios_ns
> > nfnetlink               6648  2 nf_conntrack_ipv4,nf_conntrack
> > ext3                  121032  1 
> > jbd                    55368  1 ext3
> > mbcache                 8420  1 ext3
> > dm_mirror              20340  0 
> > dm_snapshot            16580  0 
> > dm_mod                 52812  2 dm_mirror,dm_snapshot
> > raid10                 22656  0 
> > raid456               119568  0 
> > xor                    14504  1 raid456
> > raid1                  22144  0 
> > raid0                   8096  0 
> > multipath               8576  0 
> > linear                  5984  0 
> > md_mod                 71860  6 raid10,raid456,raid1,raid0,multipath,linear
> > ide_cd                 36672  0 
> > cdrom                  32960  1 ide_cd
> > sd_mod                 19968  2 
> > ata_generic             7876  0 
> > usbhid                 23136  0 
> > hid                    22784  1 usbhid
> > ata_piix               13860  1 
> > libata                100052  2 ata_generic,ata_piix
> > scsi_mod              133100  2 sd_mod,libata
> > piix                    9540  0 [permanent]
> > floppy                 54468  0 
> > ehci_hcd               29132  0 
> > uhci_hcd               22160  0 
> > generic                 4932  0 [permanent]
> > ide_core              114728  3 ide_cd,piix,generic
> > e1000                 113376  0 
> > usbcore               122312  4 usbhid,ehci_hcd,uhci_hcd
> > thermal                13928  0 
> > processor              30536  1 thermal
> > fan                     4772  0 
> > 
> > [8.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem)
> > 
> > /proc/ioports:
> > 
> > 0000-001f : dma1
> > 0020-0021 : pic1
> > 0040-0043 : timer0
> > 0050-0053 : timer1
> > 0060-006f : keyboard
> > 0080-008f : dma page reg
> > 00a0-00a1 : pic2
> > 00c0-00df : dma2
> > 00f0-00ff : fpu
> > 0170-0177 : 0000:00:1f.1
> > 01f0-01f7 : 0000:00:1f.1
> >   01f0-01f7 : ide0
> > 0290-0297 : pnp 00:08
> > 0376-0376 : 0000:00:1f.1
> > 03c0-03df : vga+
> > 03f2-03f5 : floppy
> > 03f6-03f6 : 0000:00:1f.1
> >   03f6-03f6 : ide0
> > 03f7-03f7 : floppy DIR
> > 03f8-03ff : serial
> > 0400-041f : 0000:00:1f.3
> >   0410-0415 : ACPI CPU throttle
> > 0480-04bf : 0000:00:1f.0
> > 0800-087f : 0000:00:1f.0
> >   0800-0803 : ACPI PM1a_EVT_BLK
> >   0804-0805 : ACPI PM1a_CNT_BLK
> >   0808-080b : ACPI PM_TMR
> >   0820-0820 : ACPI PM2_CNT_BLK
> >   0828-082f : ACPI GPE0_BLK
> > 0cf8-0cff : PCI conf1
> > 8000-801f : 0000:00:1d.0
> >   8000-801f : uhci_hcd
> > 8400-841f : 0000:00:1d.1
> >   8400-841f : uhci_hcd
> > 8800-881f : 0000:00:1d.2
> >   8800-881f : uhci_hcd
> > 9000-901f : 0000:00:1d.3
> >   9000-901f : uhci_hcd
> > 9400-940f : 0000:00:1f.2
> >   9400-940f : libata
> > 9800-9803 : 0000:00:1f.2
> >   9800-9803 : libata
> > a000-a007 : 0000:00:1f.2
> >   a000-a007 : libata
> > a400-a403 : 0000:00:1f.2
> >   a400-a403 : libata
> > a800-a807 : 0000:00:1f.2
> >   a800-a807 : libata
> > b000-bfff : PCI Bus #01
> > c000-cfff : PCI Bus #02
> >   c800-c81f : 0000:02:00.0
> >     c800-c81f : e1000
> > d000-dfff : PCI Bus #03
> > e000-efff : PCI Bus #04
> > ffa0-ffaf : 0000:00:1f.1
> >   ffa0-ffa7 : ide0
> >   ffa8-ffaf : ide1
> > 
> > iomem:
> > 
> > 00000000-0009fbff : System RAM
> >   00000000-00000000 : Crash kernel
> > 0009fc00-0009ffff : reserved
> > 000a0000-000bffff : Video RAM area
> > 000c0000-000cefff : Video ROM
> > 000f0000-000fffff : System ROM
> > 00100000-7ff9ffff : System RAM
> >   00100000-0029a5e4 : Kernel code
> >   0029a5e5-003353b3 : Kernel data
> > 7ffa0000-7ffadfff : ACPI Tables
> > 7ffae000-7ffdffff : ACPI Non-volatile Storage
> > 7ffe0000-7fffffff : reserved
> > cddf8000-cddfbfff : 0000:00:1b.0
> > cddffc00-cddfffff : 0000:00:1d.7
> >   cddffc00-cddfffff : ehci_hcd
> > cde00000-cdefffff : PCI Bus #02
> >   cdee0000-cdefffff : 0000:02:00.0
> >     cdee0000-cdefffff : e1000
> > cdf00000-cfffffff : PCI Bus #04
> >   cdfe0000-cdffffff : 0000:04:00.0
> >   ce000000-ceffffff : 0000:04:00.0
> >   cf000000-cfffffff : 0000:04:00.0
> > d0000000-dfffffff : PCI Bus #04
> >   d0000000-dfffffff : 0000:04:00.0
> > ffb80000-ffffffff : reserved
> > 
> > [8.5.] PCI information ('lspci -vvv' as root)
> > 
> > 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 817a
> > 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> > 	Latency: 0
> > 	Capabilities: [e0] Vendor Specific Information
> > 
> > 00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
> > 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> > 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0, Cache Line Size: 16 bytes
> > 	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
> > 	I/O behind bridge: 0000e000-0000efff
> > 	Memory behind bridge: cdf00000-cfffffff
> > 	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
> > 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> > 	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> > 	Capabilities: [88] Subsystem: Intel Corporation Unknown device 0000
> > 	Capabilities: [80] Power Management version 2
> > 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> > 	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
> > 		Address: fee0300c  Data: 41b9
> > 	Capabilities: [a0] Express Root Port (Slot+) IRQ 0
> > 		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> > 		Device: Latency L0s <64ns, L1 <1us
> > 		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> > 		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> > 		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> > 		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2
> > 		Link: Latency L0s <256ns, L1 <4us
> > 		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> > 		Link: Speed 2.5Gb/s, Width x16
> > 		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
> > 		Slot: Number 0, PowerLimit 75.000000
> > 		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> > 		Slot: AttnInd Off, PwrInd On, Power-
> > 		Root: Correctable- Non-Fatal- Fatal- PME-
> > 
> > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 8237
> > 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0, Cache Line Size: 16 bytes
> > 	Interrupt: pin A routed to IRQ 5
> > 	Region 0: Memory at cddf8000 (64-bit, non-prefetchable) [size=16K]
> > 	Capabilities: [50] Power Management version 2
> > 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> > 	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
> > 		Address: 0000000000000000  Data: 0000
> > 	Capabilities: [70] Express Unknown type IRQ 0
> > 		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> > 		Device: Latency L0s <64ns, L1 <1us
> > 		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > 		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
> > 		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> > 		Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
> > 		Link: Latency L0s <64ns, L1 <1us
> > 		Link: ASPM Disabled CommClk- ExtSynch-
> > 		Link: Speed unknown, Width x0
> > 
> > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
> > 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> > 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0, Cache Line Size: 16 bytes
> > 	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
> > 	I/O behind bridge: 0000d000-0000dfff
> > 	Memory behind bridge: fff00000-000fffff
> > 	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> > 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> > 	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> > 	Capabilities: [40] Express Root Port (Slot+) IRQ 0
> > 		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> > 		Device: Latency L0s unlimited, L1 unlimited
> > 		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> > 		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> > 		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> > 		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
> > 		Link: Latency L0s <256ns, L1 <4us
> > 		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> > 		Link: Speed 2.5Gb/s, Width x0
> > 		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
> > 		Slot: Number 1, PowerLimit 10.000000
> > 		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
> > 		Slot: AttnInd Unknown, PwrInd Unknown, Power-
> > 		Root: Correctable- Non-Fatal- Fatal- PME-
> > 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
> > 		Address: fee0300c  Data: 41c1
> > 	Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 	Capabilities: [a0] Power Management version 2
> > 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> > 
> > 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01) (prog-if 00 [Normal decode])
> > 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> > 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0, Cache Line Size: 16 bytes
> > 	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
> > 	I/O behind bridge: 0000c000-0000cfff
> > 	Memory behind bridge: cde00000-cdefffff
> > 	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> > 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> > 	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> > 	Capabilities: [40] Express Root Port (Slot-) IRQ 0
> > 		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> > 		Device: Latency L0s unlimited, L1 unlimited
> > 		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
> > 		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
> > 		Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
> > 		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
> > 		Link: Latency L0s <256ns, L1 <4us
> > 		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> > 		Link: Speed 2.5Gb/s, Width x1
> > 		Root: Correctable- Non-Fatal- Fatal- PME-
> > 	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
> > 		Address: fee0300c  Data: 41c9
> > 	Capabilities: [90] Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 	Capabilities: [a0] Power Management version 2
> > 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> > 
> > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI])
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0
> > 	Interrupt: pin A routed to IRQ 18
> > 	Region 4: I/O ports at 8000 [size=32]
> > 
> > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI])
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0
> > 	Interrupt: pin B routed to IRQ 17
> > 	Region 4: I/O ports at 8400 [size=32]
> > 
> > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI])
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0
> > 	Interrupt: pin C routed to IRQ 19
> > 	Region 4: I/O ports at 8800 [size=32]
> > 
> > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI])
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0
> > 	Interrupt: pin D routed to IRQ 20
> > 	Region 4: I/O ports at 9000 [size=32]
> > 
> > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0
> > 	Interrupt: pin A routed to IRQ 18
> > 	Region 0: Memory at cddffc00 (32-bit, non-prefetchable) [size=1K]
> > 	Capabilities: [50] Power Management version 2
> > 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> > 	Capabilities: [58] Debug port
> > 
> > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
> > 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> > 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0
> > 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
> > 	I/O behind bridge: 0000b000-0000bfff
> > 	Memory behind bridge: fff00000-000fffff
> > 	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
> > 	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> > 	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
> > 	Capabilities: [50] Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 
> > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0
> > 	Capabilities: [e0] Vendor Specific Information
> > 
> > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0
> > 	Interrupt: pin A routed to IRQ 19
> > 	Region 0: I/O ports at 01f0 [size=8]
> > 	Region 1: I/O ports at 03f4 [size=1]
> > 	Region 2: I/O ports at 0170 [size=8]
> > 	Region 3: I/O ports at 0374 [size=1]
> > 	Region 4: I/O ports at ffa0 [size=16]
> > 
> > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controller IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 2601
> > 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0
> > 	Interrupt: pin B routed to IRQ 17
> > 	Region 0: I/O ports at a800 [size=8]
> > 	Region 1: I/O ports at a400 [size=4]
> > 	Region 2: I/O ports at a000 [size=8]
> > 	Region 3: I/O ports at 9800 [size=4]
> > 	Region 4: I/O ports at 9400 [size=16]
> > 	Capabilities: [70] Power Management version 2
> > 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
> > 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> > 
> > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 8179
> > 	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Interrupt: pin B routed to IRQ 0
> > 	Region 4: I/O ports at 0400 [size=32]
> > 
> > 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 81c2
> > 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0, Cache Line Size: 64 bytes
> > 	Interrupt: pin A routed to IRQ 220
> > 	Region 0: Memory at cdee0000 (32-bit, non-prefetchable) [size=128K]
> > 	Region 2: I/O ports at c800 [size=32]
> > 	Capabilities: [c8] Power Management version 2
> > 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> > 		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> > 	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
> > 		Address: 00000000fee0300c  Data: 41e9
> > 	Capabilities: [e0] Express Endpoint IRQ 0
> > 		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
> > 		Device: Latency L0s <512ns, L1 <64us
> > 		Device: AtnBtn- AtnInd- PwrInd-
> > 		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > 		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> > 		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
> > 		Link: Supported Speed 2.5Gb/s, Width x1, ASPM unknown, Port 0
> > 		Link: Latency L0s <128ns, L1 <64us
> > 		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
> > 		Link: Speed 2.5Gb/s, Width x1
> > 
> > 04:00.0 VGA compatible controller: nVidia Corporation GeForce 7300 GS (rev a1) (prog-if 00 [VGA])
> > 	Subsystem: ASUSTeK Computer Inc. Unknown device 81f1
> > 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> > 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> > 	Latency: 0, Cache Line Size: 16 bytes
> > 	Interrupt: pin A routed to IRQ 11
> > 	Region 0: Memory at cf000000 (32-bit, non-prefetchable) [size=16M]
> > 	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> > 	Region 3: Memory at ce000000 (64-bit, non-prefetchable) [size=16M]
> > 	Expansion ROM at cdfe0000 [disabled] [size=128K]
> > 	Capabilities: [60] Power Management version 2
> > 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> > 		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> > 	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
> > 		Address: 0000000000000000  Data: 0000
> > 	Capabilities: [78] Express Endpoint IRQ 0
> > 		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
> > 		Device: Latency L0s <256ns, L1 <4us
> > 		Device: AtnBtn- AtnInd- PwrInd-
> > 		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
> > 		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> > 		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
> > 		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
> > 		Link: Latency L0s <256ns, L1 <4us
> > 		Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
> > 		Link: Speed 2.5Gb/s, Width x16
> > 
> > [8.6.] SCSI information (from /proc/scsi/scsi)
> > 
> > (SATA)
> > 
> > Attached devices:
> > Host: scsi0 Channel: 00 Id: 00 Lun: 00
> >   Vendor: ATA      Model: SAMSUNG HD080HJ  Rev: ZH10
> >   Type:   Direct-Access                    ANSI SCSI revision: 05
> > Host: scsi1 Channel: 00 Id: 00 Lun: 00
> >   Vendor: ATA      Model: SAMSUNG HD080HJ  Rev: ZH10
> >   Type:   Direct-Access                    ANSI SCSI revision: 05
> > 

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: kernel oops after unloading nf_conntrack_netbios_ns_module
  2007-05-10 11:01   ` Gabor Burjan
@ 2007-05-12 15:05     ` Patrick McHardy
  2007-05-14  7:16       ` Gabor Burjan
  0 siblings, 1 reply; 6+ messages in thread
From: Patrick McHardy @ 2007-05-12 15:05 UTC (permalink / raw)
  To: Gabor Burjan; +Cc: Andrew Morton, linux-kernel, netdev

[-- Attachment #1: Type: text/plain, Size: 375 bytes --]

Gabor Burjan wrote:
> EIP is at destroy_conntrack+0x52/0x127 [nf_conntrack]
>
>>>nmblookup <existing_netbios_name>
>>>cat /proc/net/ip_conntrack
>>>
>>>sleep 3
>>>
>>>rmmod nf_conntrack_netbios_ns


Thanks for the report and good testcase, the crash can only happen with
a sleep of >= 3s after the last nmblookup packet was sent.

Can you try if this patch fixes it please?


[-- Attachment #2: x --]
[-- Type: text/plain, Size: 2517 bytes --]

[NETFILTER]: nf_conntrack: fix use-after-free in helper destroy callback

When the helper module is removed for a master connection that has a
fulfilled expectation, but has already timed out and got removed from
the hash tables, nf_conntrack_helper_unregister can't find the master
connection to unset the helper, causing a use-after-free when the
expected connection is destroyed and releases the last reference to
the master.

The helper destroy callback was introduced for the PPtP helper to clean
up expectations and expected connections when the master connection
times out, but doing this from the destroy_conntrack only works for
unfulfilled expectations since expected connections hold a reference
to the master and it is not destroyed. Move the destroy callback to
the timeout function, which fixes both problems.

Signed-off-by: Patrick McHardy <kaber@trash.net>

---
commit 50d2ab6c1353c32b994e6171b231fc771d0a2b73
tree 9b2cd5659dad0b452e59fff4869f7d9db780fd02
parent 6b99a1744ab187073bca84a9fd3ccbf091865ca6
author Patrick McHardy <kaber@trash.net> Sat, 12 May 2007 16:59:07 +0200
committer Patrick McHardy <kaber@trash.net> Sat, 12 May 2007 17:00:18 +0200

 net/netfilter/nf_conntrack_core.c |    8 ++++----
 1 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index cb29ba7..0975fee 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -315,7 +315,6 @@ static void
 destroy_conntrack(struct nf_conntrack *nfct)
 {
 	struct nf_conn *ct = (struct nf_conn *)nfct;
-	struct nf_conn_help *help = nfct_help(ct);
 	struct nf_conntrack_l3proto *l3proto;
 	struct nf_conntrack_l4proto *l4proto;
 
@@ -326,9 +325,6 @@ destroy_conntrack(struct nf_conntrack *nfct)
 	nf_conntrack_event(IPCT_DESTROY, ct);
 	set_bit(IPS_DYING_BIT, &ct->status);
 
-	if (help && help->helper && help->helper->destroy)
-		help->helper->destroy(ct);
-
 	/* To make sure we don't get any weird locking issues here:
 	 * destroy_conntrack() MUST NOT be called with a write lock
 	 * to nf_conntrack_lock!!! -HW */
@@ -369,6 +365,10 @@ destroy_conntrack(struct nf_conntrack *nfct)
 static void death_by_timeout(unsigned long ul_conntrack)
 {
 	struct nf_conn *ct = (void *)ul_conntrack;
+	struct nf_conn_help *help = nfct_help(ct);
+
+	if (help && help->helper && help->helper->destroy)
+		help->helper->destroy(ct);
 
 	write_lock_bh(&nf_conntrack_lock);
 	/* Inside lock so preempt is disabled on module removal path.

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: kernel oops after unloading nf_conntrack_netbios_ns_module
  2007-05-12 15:05     ` Patrick McHardy
@ 2007-05-14  7:16       ` Gabor Burjan
  2007-05-14 22:14         ` Andrew Morton
  0 siblings, 1 reply; 6+ messages in thread
From: Gabor Burjan @ 2007-05-14  7:16 UTC (permalink / raw)
  To: Patrick McHardy; +Cc: Andrew Morton, linux-kernel, netdev

On Sat, May 12, 2007 at 05:05:51PM +0200, Patrick McHardy wrote:
> Gabor Burjan wrote:
> > EIP is at destroy_conntrack+0x52/0x127 [nf_conntrack]
> >
> >>>nmblookup <existing_netbios_name>
> >>>cat /proc/net/ip_conntrack
> >>>
> >>>sleep 3
> >>>
> >>>rmmod nf_conntrack_netbios_ns
> 
> Thanks for the report and good testcase, the crash can only happen with
> a sleep of >= 3s after the last nmblookup packet was sent.
> 
> Can you try if this patch fixes it please?

Yes, it fixes the problem.
Thank you,

Gabor

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: kernel oops after unloading nf_conntrack_netbios_ns_module
  2007-05-14  7:16       ` Gabor Burjan
@ 2007-05-14 22:14         ` Andrew Morton
  0 siblings, 0 replies; 6+ messages in thread
From: Andrew Morton @ 2007-05-14 22:14 UTC (permalink / raw)
  To: Gabor Burjan; +Cc: Patrick McHardy, linux-kernel, netdev

On Mon, 14 May 2007 09:16:11 +0200
Gabor Burjan <buga@buvoshetes.hu> wrote:

> On Sat, May 12, 2007 at 05:05:51PM +0200, Patrick McHardy wrote:
> > Gabor Burjan wrote:
> > > EIP is at destroy_conntrack+0x52/0x127 [nf_conntrack]
> > >
> > >>>nmblookup <existing_netbios_name>
> > >>>cat /proc/net/ip_conntrack
> > >>>
> > >>>sleep 3
> > >>>
> > >>>rmmod nf_conntrack_netbios_ns
> > 
> > Thanks for the report and good testcase, the crash can only happen with
> > a sleep of >= 3s after the last nmblookup packet was sent.
> > 
> > Can you try if this patch fixes it please?
> 
> Yes, it fixes the problem.

Just speaking generally, rather than about this particualr patch...

Gabor did quite an amount of valuable work here: tested a 2.6.20.x kernel,
developed a test case for reproducing the bug, reported it all quite
exhaustively, tested the resulting patch.

The least we can do in return is to put a big fat "thanks" in the changelog
when the fix gets merged.

> Thank you,

No - thank _you_.

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2007-05-14 22:15 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-05-10  9:06 kernel oops after unloading nf_conntrack_netbios_ns_module Gabor Burjan
2007-05-10 10:34 ` Andrew Morton
2007-05-10 11:01   ` Gabor Burjan
2007-05-12 15:05     ` Patrick McHardy
2007-05-14  7:16       ` Gabor Burjan
2007-05-14 22:14         ` Andrew Morton

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).