LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* Cardbus/Yenta/PCI/2.6.24 help
@ 2008-02-07 10:10 Christophe Huygens
  2008-02-08 22:26 ` Christophe Huygens
  0 siblings, 1 reply; 2+ messages in thread
From: Christophe Huygens @ 2008-02-07 10:10 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 26331 bytes --]

Hi,

I have a problem getting a PCI to Cardbus adapter to work on a dell
1550 server. I have been truying for days to get this going but
I cannot figure out what is wrong. As far as I understand, all
should be ok in terms ok irqs, and resource windows., PCI..
This machine has 2G memory and 2 CPUs.
Running 2.6.22-14-generic, same problem on 2.6.24.

But upon card insertion... nil happens. PCI slot, adapter
and cards are ganuaranteed healthy.

None of the kernel boot options help imho.

Yenta reports a troublesome (?) socket status:

[  170.575520] Yenta: CardBus bridge found at 0000:02:06.0 [0000:0000]
[  170.707652] Yenta: ISA IRQ mask 0x0000, PCI irq 16
[  170.707708] Socket status: ffffffff

Thanks for any assistance, I am running out of steam here!
Attached lspci, dmesg, io*

Christophe


xtof@rover1:~$ lspci
00:00.0 Host bridge: Broadcom CNB20HE Host Bridge (rev 23)
00:00.1 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
00:00.2 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
00:00.3 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
00:01.0 Ethernet controller: Intel Corporation 82557/8/9 Ethernet Pro 
100 (rev 08)
00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50)
00:0f.1 IDE interface: Broadcom OSB4 IDE Controller
02:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
02:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
02:06.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)



xtof@rover1:~$ lspci -v
00:00.0 Host bridge: Broadcom CNB20HE Host Bridge (rev 23)
       Flags: fast devsel

00:00.1 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
       Flags: bus master, medium devsel, latency 32

00:00.2 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
       Flags: medium devsel

00:00.3 Host bridge: Broadcom CNB20HE Host Bridge (rev 01)
       Flags: medium devsel

00:01.0 Ethernet controller: Intel Corporation 82557/8/9 Ethernet Pro 
100 (rev 08)
       Subsystem: Dell Unknown device 00da
       Flags: bus master, medium devsel, latency 32, IRQ 17
       Memory at fe1ff000 (32-bit, non-prefetchable) [size=4K]
       I/O ports at ecc0 [size=64]
       Memory at fe000000 (32-bit, non-prefetchable) [size=1M]
       Capabilities: <access denied>

00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 
(prog-if 00 [VGA])
       Subsystem: Dell Unknown device 00df
       Flags: bus master, VGA palette snoop, stepping, medium devsel, 
latency 32
       Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
       I/O ports at e800 [size=256]
       Memory at fe1fe000 (32-bit, non-prefetchable) [size=4K]
       [virtual] Expansion ROM at 80000000 [disabled] [size=128K]
       Capabilities: <access denied>

00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50)
       Subsystem: Broadcom OSB4 South Bridge
       Flags: bus master, medium devsel, latency 0

00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8a [Master 
SecP PriP])
       Flags: bus master, medium devsel, latency 64
       [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
[disabled] [size=8]
       [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
[disabled] [size=1]
       [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
[disabled] [size=8]
       [virtual] Memory at 00000370 (type 3, non-prefetchable) 
[disabled] [size=1]
       I/O ports at 08b0 [size=16]

02:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
       Subsystem: Dell Unknown device 00df
       Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18
       BIST result: 00
       I/O ports at dc00 [disabled] [size=256]
       Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
       Expansion ROM at feb00000 [disabled] [size=128K]
       Capabilities: <access denied>

02:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01)
       Subsystem: Dell Unknown device 00df
       Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 19
       BIST result: 00
       I/O ports at d800 [disabled] [size=256]
       Memory at feafe000 (64-bit, non-prefetchable) [size=4K]
       Expansion ROM at 80020000 [disabled] [size=128K]
       Capabilities: <access denied>

02:06.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 81)
       Flags: bus master, medium devsel, latency 168, IRQ 16
       Memory at 80040000 (32-bit, non-prefetchable) [size=4K]
       Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
       Memory window 0: 84000000-87fff000 (prefetchable)
       Memory window 1: 88000000-8bfff000
       I/O window 0: 00001000-000010ff
       I/O window 1: 00001400-000014ff
       16-bit legacy interface ports at 0001

xtof@rover1:~$ dmesg
[    0.000000] Linux version 2.6.22-14-generic (buildd@terranova) (gcc 
version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Fri 
Feb 1 04:59:50 UTC 2008 (Ubuntu 2.6.22-14.51-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
[    0.000000]  BIOS-e820: 000000007fff0000 - 000000007fffec00 (ACPI data)
[    0.000000]  BIOS-e820: 000000007fffec00 - 000000007ffff000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] 1151MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000fe710
[    0.000000] Entering add_active_range(0, 0, 524272) 0 entries of 256 
used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   524272
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   524272
[    0.000000] On node 0 totalpages: 524272
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2303 pages used for memmap
[    0.000000]   HighMem zone: 292593 pages, LIFO batch:31
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FDCD0 checksum 0
[    0.000000] ACPI: RSDP 000FDCD0, 0014 (r0 DELL  )
[    0.000000] ACPI: RSDT 000FDCE4, 002C (r1 DELL   PA1550          1 
MSFT  100000A)
[    0.000000] ACPI: FACP 000FDD10, 0074 (r1 DELL   PA1550          1 
MSFT  100000A)
[    0.000000] ACPI: DSDT 7FFF0000, 2400 (r1 DELL   PA1550          1 
MSFT  100000A)
[    0.000000] ACPI: FACS 7FFFFC00, 0040
[    0.000000] ACPI: APIC 000FDD84, 0060 (r1 DELL   PA1550          1 
MSFT  100000A)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:11 APIC version 17
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:11 APIC version 17
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 
0-15
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
[    0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 
16-31
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 
7ffff000:7ec01000)
[    0.000000] Built 1 zonelists.  Total pages: 520177
[    0.000000] Kernel command line: 
root=UUID=8c6817e8-b0da-4d4b-8864-107903f1a6e9 ro reserve=00001000,000014ff
[    0.000000] mapped APIC to ffffd000 (fee00000)
[    0.000000] mapped IOAPIC to ffffc000 (fec00000)
[    0.000000] mapped IOAPIC to ffffb000 (fec01000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 1130.491 MHz processor.
[  127.524123] Console: colour VGA+ 80x25
[  127.527198] Dentry cache hash table entries: 131072 (order: 7, 524288 
bytes)
[  127.528892] Inode-cache hash table entries: 65536 (order: 6, 262144 
bytes)
[  127.729679] Memory: 2067712k/2097088k available (2015k kernel code, 
28008k reserved, 916k data, 364k init, 1179584k highmem)
[  127.729771] virtual kernel memory layout:
[  127.729773]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
[  127.729776]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[  127.729778]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[  127.729781]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[  127.729784]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
[  127.729786]       .data : 0xc02f7e66 - 0xc03dce84   ( 916 kB)
[  127.729789]       .text : 0xc0100000 - 0xc02f7e66   (2015 kB)
[  127.730154] Checking if this processor honours the WP bit even in 
supervisor mode... Ok.
[  127.730339] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, 
CPUs=2, Nodes=1
[  127.810362] Calibrating delay using timer specific routine.. 2262.30 
BogoMIPS (lpj=4524611)
[  127.810519] Security Framework v1.0.0 initialized
[  127.810586] SELinux:  Disabled at boot.
[  127.810665] Mount-cache hash table entries: 512
[  127.811030] CPU: After generic identify, caps: 0383fbff 00000000 
00000000 00000000 00000000 00000000 00000000
[  127.811054] CPU: L1 I cache: 16K, L1 D cache: 16K
[  127.811132] CPU: L2 cache: 512K
[  127.811181] CPU: After all inits, caps: 0383fbff 00000000 00000000 
00000040 00000000 00000000 00000000
[  127.811203] Compat vDSO mapped to ffffe000.
[  127.811271] Checking 'hlt' instruction... OK.
[  127.826526] SMP alternatives: switching to UP code
[  127.827293] Early unpacking initramfs... done
[  128.328834] ACPI: Core revision 20070126
[  128.329005] ACPI: Looking for DSDT in initramfs... error, file 
/DSDT.aml not found.
[  128.331555] CPU0: Intel(R) Pentium(R) III CPU family      1133MHz 
stepping 01
[  128.331699] SMP alternatives: switching to SMP code
[  128.331956] Booting processor 1/0 eip 3000
[  128.342237] Initializing CPU#1
[  128.421829] Calibrating delay using timer specific routine.. 2261.09 
BogoMIPS (lpj=4522189)
[  128.421842] CPU: After generic identify, caps: 0383fbff 00000000 
00000000 00000000 00000000 00000000 00000000
[  128.421857] CPU: L1 I cache: 16K, L1 D cache: 16K
[  128.421861] CPU: L2 cache: 512K
[  128.421866] CPU: After all inits, caps: 0383fbff 00000000 00000000 
00000040 00000000 00000000 00000000
[  128.422330] CPU1: Intel(R) Pentium(R) III CPU family      1133MHz 
stepping 01
[  128.422654] Total of 2 processors activated (4523.40 BogoMIPS).
[  128.423025] ENABLING IO-APIC IRQs
[  128.423321] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[  128.569915] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[  128.590006] Brought up 2 CPUs
[  128.889692] migration_cost=1199
[  128.890098] Booting paravirtualized kernel on bare hardware
[  128.890268] Time:  9:04:41  Date: 01/06/108
[  128.890355] NET: Registered protocol family 16
[  128.890571] EISA bus registered
[  128.890621] ACPI: bus type pci registered
[  128.891744] PCI: PCI BIOS revision 2.10 entry at 0xfcb7e, last bus=2
[  128.891796] PCI: Using configuration type 1
[  128.891841] Setting up standard PCI resources
[  128.894493] ACPI: EC: Look up EC in DSDT
[  128.897505] ACPI: Interpreter enabled
[  128.897555] ACPI: (supports S0 S4 S5)
[  128.897723] ACPI: Using IOAPIC for interrupt routing
[  128.905022] ACPI: PCI Root Bridge [PCI0] (0000:00)
[  128.905100] PCI: Probing PCI hardware (bus 00)
[  128.905298] PCI: Firmware left 0000:00:01.0 e100 interrupts enabled, 
disabling
[  128.905543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[  128.906817] ACPI: PCI Root Bridge [PCI1] (0000:01)
[  128.906888] PCI: Probing PCI hardware (bus 01)
[  128.906999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
[  128.907285] ACPI: PCI Root Bridge [PCI2] (0000:02)
[  128.907356] PCI: Probing PCI hardware (bus 02)
[  128.907632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
[  128.908383] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 
12 14)
[  128.908953] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.909660] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.910294] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.910928] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.911564] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.912200] ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.912835] ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.913513] ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.914147] ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.914779] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.915413] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 
12 14)
[  128.915984] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 
12 14)
[  128.916551] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.917197] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.917835] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 
12 14) *0, disabled.
[  128.918470] ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 10 11 12 
14) *0, disabled.
[  128.919055] Linux Plug and Play Support v0.97 (c) Adam Belay
[  128.919121] pnp: PnP ACPI init
[  128.919180] ACPI: bus type pnp registered
[  128.928058] pnp: PnP ACPI: found 13 devices
[  128.928108] ACPI: ACPI bus type pnp unregistered
[  128.928159] PnPBIOS: Disabled by ACPI PNP
[  128.928310] PCI: Using ACPI for IRQ routing
[  128.928360] PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
[  128.930898] NET: Registered protocol family 8
[  128.930947] NET: Registered protocol family 20
[  128.931132] pnp: 00:09: ioport range 0x800-0x87f has been reserved
[  128.931183] pnp: 00:09: ioport range 0x880-0x89f has been reserved
[  128.931234] pnp: 00:09: ioport range 0x500-0x501 has been reserved
[  128.931285] pnp: 00:09: ioport range 0x580-0x58f has been reserved
[  128.931336] pnp: 00:09: ioport range 0xc00-0xcd7 has been reserved
[  128.931387] pnp: 00:09: ioport range 0xf50-0xf58 has been reserved
[  128.931453] pnp: 00:0a: iomem range 0x0-0x9ffff could not be reserved
[  128.931504] pnp: 00:0a: iomem range 0x100000-0x7fffffff could not be 
reserved
[  128.931557] pnp: 00:0a: iomem range 0xf0000-0xfffff could not be 
reserved
[  128.931610] pnp: 00:0a: iomem range 0xfec00000-0xfec0ffff could not 
be reserved
[  128.933411] Time: tsc clocksource has been installed.
[  128.962366] PCI: Bus 3, cardbus bridge: 0000:02:06.0
[  128.962415]   IO window: 00001000-000010ff
[  128.962463]   IO window: 00001400-000014ff
[  128.962512]   PREFETCH window: 84000000-87ffffff
[  128.962561]   MEM window: 88000000-8bffffff
[  128.962619] PCI: Enabling device 0000:02:06.0 (0000 -> 0003)
[  128.962680] ACPI: PCI Interrupt 0000:02:06.0[A] -> GSI 29 (level, 
low) -> IRQ 16
[  128.962792] NET: Registered protocol family 2
[  129.005423] IP route cache hash table entries: 32768 (order: 5, 
131072 bytes)
[  129.005671] TCP established hash table entries: 131072 (order: 8, 
1572864 bytes)
[  129.011705] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[  129.014002] TCP: Hash tables configured (established 131072 bind 65536)
[  129.014065] TCP reno registered
[  129.025691] checking if image is initramfs...<6>Switched to high 
resolution mode on CPU 1
[  129.463015]  it is
[  129.464965] Switched to high resolution mode on CPU 0
[  129.984555] Freeing initrd memory: 6883k freed
[  129.985361] audit: initializing netlink socket (disabled)
[  129.985439] audit(1202288682.084:1): initialized
[  129.985668] highmem bounce pool size: 64 pages
[  129.990481] VFS: Disk quotas dquot_6.5.1
[  129.990648] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[  129.990916] io scheduler noop registered
[  129.990964] io scheduler anticipatory registered
[  129.991013] io scheduler deadline registered
[  129.991090] io scheduler cfq registered (default)
[  129.991174] Boot video device is 0000:00:03.0
[  129.991472] isapnp: Scanning for PnP cards...
[  130.344567] isapnp: No Plug & Play device found
[  130.399191] Real Time Clock Driver v1.12ac
[  130.400581] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ 
sharing enabled
[  130.400811] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  130.402103] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[  130.403797] RAMDISK driver initialized: 16 RAM disks of 65536K size 
1024 blocksize
[  130.404356] input: Macintosh mouse button emulation as 
/class/input/input0
[  130.404586] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 
0x60,0x64 irq 1,12
[  130.406661] serio: i8042 KBD port at 0x60,0x64 irq 1
[  130.406714] serio: i8042 AUX port at 0x60,0x64 irq 12
[  130.407001] mice: PS/2 mouse device common for all mice
[  130.407276] EISA: Probing bus 0 at eisa.0
[  130.407330] EISA: Cannot allocate resource for mainboard
[  130.407379] Cannot allocate resource for EISA slot 1
[  130.407465] EISA: Detected 0 cards.
[  130.407712] TCP cubic registered
[  130.407787] NET: Registered protocol family 1
[  130.407882] Using IPI No-Shortcut mode
[  130.408242]   Magic number: 12:888:69
[  130.409027] Freeing unused kernel memory: 364k freed
[  130.436974] input: AT Translated Set 2 keyboard as /class/input/input1
[  130.693504] AppArmor: AppArmor 
initialized<5>audit(1202288682.584:2):  type=1505 info="AppArmor 
initialized" pid=1063
[  130.710134] fuse init (API version 7.8)
[  130.721797] Failure registering capabilities with primary security 
module.
[  131.493354] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k4-NAPI
[  131.493415] e100: Copyright(c) 1999-2006 Intel Corporation
[  131.493535] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, 
low) -> IRQ 17
[  131.515820] e100: eth0: e100_probe: addr 0xfe1ff000, irq 17, MAC addr 
00:06:5B:04:C9:DD
[  131.591319] SCSI subsystem initialized
[  131.608199] libata version 2.21 loaded.
[  131.612586] scsi0 : pata_serverworks
[  131.612722] scsi1 : pata_serverworks
[  131.612811] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 
bmdma 0x000108b0 irq 14
[  131.612878] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 
bmdma 0x000108b8 irq 15
[  131.672208] Floppy drive(s): fd0 is 1.44M
[  131.711686] FDC 0 is a National Semiconductor PC87306
[  132.042724] ata1.00: ATAPI: SAMSUNG CD-ROM SN-124, q009, max UDMA/33, 
CDB intr
[  132.214533] ata1.00: configured for UDMA/33
[  132.370687] scsi 0:0:0:0: CD-ROM            SAMSUNG  CD-ROM SN-124    
q009 PQ: 0 ANSI: 5
[  132.376963] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 27 (level, 
low) -> IRQ 18
[  132.600062] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[  132.600125] Uniform CD-ROM driver Revision: 3.20
[  132.600495] sr 0:0:0:0: Attached scsi CD-ROM sr0
[  132.609339] sr 0:0:0:0: Attached scsi generic sg0 type 5
[  147.575842] scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 
7.0
[  147.575847]         <Adaptec aic7899 Ultra160 SCSI adapter>
[  147.575850]         aic7899: Ultra160 Wide Channel A, SCSI Id=7, 
32/253 SCBs
[  147.575853] [  147.576332] ACPI: PCI Interrupt 0000:02:05.1[B] -> GSI 
28 (level, low) -> IRQ 19
[  147.577570] scsi 2:0:0:0: Direct-Access     SEAGATE  ST373307LC       
DS09 PQ: 0 ANSI: 3
[  147.577653] scsi2:A:0:0: Tagged Queuing enabled.  Depth 8
[  147.577742]  target2:0:0: Beginning Domain Validation
[  147.580778]  target2:0:0: wide asynchronous
[  147.583106]  target2:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, 
offset 63)
[  147.588290]  target2:0:0: Ending Domain Validation
[  148.879359] scsi 2:0:6:0: Processor         DELL     1x3 U2W SCSI BP  
1.19 PQ: 0 ANSI: 2
[  148.879449]  target2:0:6: Beginning Domain Validation
[  148.900738]  target2:0:6: Ending Domain Validation
[  150.961257] scsi 2:0:0:0: Attached scsi generic sg1 type 0
[  150.961424] scsi 2:0:6:0: Attached scsi generic sg2 type 3
[  162.773520] scsi3 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 
7.0
[  162.773525]         <Adaptec aic7899 Ultra160 SCSI adapter>
[  162.773528]         aic7899: Ultra160 Wide Channel B, SCSI Id=7, 
32/253 SCBs
[  162.773531] [  162.805958] sd 2:0:0:0: [sda] 143374650 512-byte 
hardware sectors (73408 MB)
[  162.807173] sd 2:0:0:0: [sda] Write Protect is off
[  162.807223] sd 2:0:0:0: [sda] Mode Sense: ab 00 10 08
[  162.810265] sd 2:0:0:0: [sda] Write cache: disabled, read cache: 
enabled, supports DPO and FUA
[  162.810945] sd 2:0:0:0: [sda] 143374650 512-byte hardware sectors 
(73408 MB)
[  162.812144] sd 2:0:0:0: [sda] Write Protect is off
[  162.812193] sd 2:0:0:0: [sda] Mode Sense: ab 00 10 08
[  162.817572] sd 2:0:0:0: [sda] Write cache: disabled, read cache: 
enabled, supports DPO and FUA
[  162.817651]  sda: sda1 sda2 sda3
[  162.834397] sd 2:0:0:0: [sda] Attached SCSI disk
[  163.100336] Attempting manual resume
[  163.100385] swsusp: Resume From Partition 8:2
[  163.100389] PM: Checking swsusp image.
[  163.100626] PM: Resume from disk failed.
[  163.152439] kjournald starting.  Commit interval 5 seconds
[  163.152463] EXT3-fs: mounted filesystem with ordered data mode.
[  168.568275] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[  170.408866] Linux agpgart interface v0.102 (c) Dave Jones
[  170.411747] agpgart: unable to determine aperture size.
[  170.411799] agpgart: agp_backend_initialize() failed.
[  170.411852] agpgart-serverworks: probe of 0000:00:00.0 failed with 
error -22
[  170.411914] agpgart: unable to determine aperture size.
[  170.411961] agpgart: agp_backend_initialize() failed.
[  170.412012] agpgart-serverworks: probe of 0000:00:00.1 failed with 
error -22
[  170.412071] agpgart: ServerWorks CNB20HE is unsupported due to lack 
of documentation.
[  170.412142] agpgart: ServerWorks CNB20HE is unsupported due to lack 
of documentation.
[  170.426419] input: PC Speaker as /class/input/input2
[  170.575520] Yenta: CardBus bridge found at 0000:02:06.0 [0000:0000]
[  170.611315] NET: Registered protocol family 17
[  170.676177] piix4_smbus 0000:00:0f.0: Found 0000:00:0f.0 device
[  170.707652] Yenta: ISA IRQ mask 0x0000, PCI irq 16
[  170.707708] Socket status: ffffffff
[  171.049320] cs: IO port probe 0x100-0x3af: clean.
[  171.052136] cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 
0x4d0-0x4d7
[  171.053414] cs: IO port probe 0x820-0x8ff: clean.
[  171.053880] cs: IO port probe 0xc00-0xcf7: clean.
[  171.054279] cs: IO port probe 0xa00-0xaff: clean.
[  171.360284] input: PS/2 Generic Mouse as /class/input/input3
[  172.029205] loop: module loaded
[  172.100731] lp: driver loaded but no devices found
[  172.265169] Adding 4008208k swap on /dev/sda2.  Priority:-1 extents:1 
across:4008208k
[  172.646431] EXT3 FS on sda1, internal journal
[  173.042473] NET: Registered protocol family 10
[  173.042748] lo: Disabled Privacy Extensions
[  173.266347] kjournald starting.  Commit interval 5 seconds
[  173.273261] EXT3 FS on sda3, internal journal
[  173.273276] EXT3-fs: mounted filesystem with ordered data mode.
[  175.236478] input: Power Button (FF) as /class/input/input4
[  175.237017] ACPI: Power Button (FF) [PWRF]
[  175.366116] No dock devices found.
[  183.445294] eth0: no IPv6 routers present

xtof@rover1:~$ cat /proc/iomem
00000000-0009ffff : System RAM
 00000000-00000000 : Crash kernel
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000c8000-000cdfff : Adapter ROM
000f0000-000fffff : System ROM
00100000-7ffeffff : System RAM
 00100000-002f7e65 : Kernel code
 002f7e66-003dce83 : Kernel data
7fff0000-7fffebff : ACPI Tables
7fffec00-7fffefff : reserved
80000000-8001ffff : 0000:00:03.0
80020000-8003ffff : 0000:02:05.1
80040000-80040fff : 0000:02:06.0
 80040000-80040fff : yenta_socket
84000000-87ffffff : PCI CardBus #03
88000000-8bffffff : PCI CardBus #03
fd000000-fdffffff : 0000:00:03.0
fe000000-fe0fffff : 0000:00:01.0
 fe000000-fe0fffff : e100
fe1fe000-fe1fefff : 0000:00:03.0
fe1ff000-fe1fffff : 0000:00:01.0
 fe1ff000-fe1fffff : e100
feafe000-feafefff : 0000:02:05.1
 feafe000-feafefff : aic7xxx
feaff000-feafffff : 0000:02:05.0
 feaff000-feafffff : aic7xxx
feb00000-feb1ffff : 0000:02:05.0
fec00000-fec1ffff : reserved
fee00000-fee1ffff : reserved
fff80000-ffffffff : reserved

xtof@rover1:~$ cat /proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:0f.1
 0170-0177 : libata
01f0-01f7 : 0000:00:0f.1
 01f0-01f7 : libata
0200-020b : reserved
0376-0376 : 0000:00:0f.1
 0376-0376 : libata
03c0-03df : vga+
03f2-03f5 : floppy
03f6-03f6 : 0000:00:0f.1
 03f6-03f6 : libata
03f7-03f7 : floppy DIR
03f8-03ff : serial
0500-0501 : pnp 00:09
0580-058f : pnp 00:09
 0580-0587 : piix4_smbus
0800-087f : pnp 00:09
 0800-0803 : ACPI PM1b_EVT_BLK
 0808-080b : ACPI PM_TMR
 080c-0813 : ACPI GPE0_BLK
 0844-0847 : ACPI PM1a_EVT_BLK
 0848-0849 : ACPI PM1a_CNT_BLK
 0850-0857 : ACPI GPE1_BLK
0880-089f : pnp 00:09
08b0-08bf : 0000:00:0f.1
 08b0-08bf : libata
0c00-0cd7 : pnp 00:09
0cf8-0cff : PCI conf1
0f50-0f58 : pnp 00:09
1000-10ff : PCI CardBus #03
1400-14ff : PCI CardBus #03
d800-d8ff : 0000:02:05.1
dc00-dcff : 0000:02:05.0
e800-e8ff : 0000:00:03.0
ecc0-ecff : 0000:00:01.0
 ecc0-ecff : e100


[-- Attachment #2: xtof.vcf --]
[-- Type: text/x-vcard, Size: 253 bytes --]

begin:vcard
fn:Christophe Huygens
n:Huygens;Christophe
org:Huygens Consulting, P.S. 23 BVBA
adr:;;Kroegberg 3;Leuven;;3000;Belgium
email;internet:xtof@huygens.biz
tel;cell:+32 496 47 55 64
x-mozilla-html:FALSE
url:www.huygens.biz
version:2.1
end:vcard


^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: Cardbus/Yenta/PCI/2.6.24 help
  2008-02-07 10:10 Cardbus/Yenta/PCI/2.6.24 help Christophe Huygens
@ 2008-02-08 22:26 ` Christophe Huygens
  0 siblings, 0 replies; 2+ messages in thread
From: Christophe Huygens @ 2008-02-08 22:26 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2225 bytes --]

Christophe Huygens wrote:
> Hi,
>
> I have a problem getting a PCI to Cardbus adapter to work on a dell
> 1550 server. I have been truying for days to get this going but
> I cannot figure out what is wrong. As far as I understand, all
> should be ok in terms ok irqs, and resource windows., PCI..
> This machine has 2G memory and 2 CPUs.
> Running 2.6.22-14-generic, same problem on 2.6.24.
>
> But upon card insertion... nil happens. PCI slot, adapter
> and cards are ganuaranteed healthy.
>
> None of the kernel boot options help imho.
>
> Yenta reports a troublesome (?) socket status:
>
> [  170.575520] Yenta: CardBus bridge found at 0000:02:06.0 [0000:0000]
> [  170.707652] Yenta: ISA IRQ mask 0x0000, PCI irq 16
> [  170.707708] Socket status: ffffffff
>
> Thanks for any assistance, I am running out of steam here!
> Attached lspci, dmesg, io*
>
> Christophe
I finally was able to test this with Windows XP (ouch) and it yes it 
does work.
So either Cardbus or PCI has an issue

Christophe


-- 
------------------------------------------------------------------------

This e-mail and any attached files are confidential and may be legally privileged. If you are not the addressee, any disclosure, reproduction, copying, distribution, or other dissemination or use of the transmitted information is strictly prohibited. If you have received this transmission in error please notify P.S. 23 immediately and then delete this e-mail.
P.S. 23 does not accept liability for the correct and complete transmission of the information, nor for any delay or interruption of the transmission, nor for damages arising from the use of or reliance on the information, nor for confidentiality of the information sent using this channel. The sender or recipient of these messages agrees that they may be read by other P.S. 23 employees than the official recipient or sender in order to ensure the continuity of work-related activities and allow supervision thereof.

------------------------------------------------------------------------

Huygens Consulting
a division of P.S. 23 BVBA
ir. Christophe Huygens
xtof@huygens.biz

BTW - BE - 0479.947.684 - RPR Leuven
Kroegberg 3 B-3000 Leuven
www.huygens.biz
phone +32 496 47 55 64


[-- Attachment #2: xtof.vcf --]
[-- Type: text/x-vcard, Size: 253 bytes --]

begin:vcard
fn:Christophe Huygens
n:Huygens;Christophe
org:Huygens Consulting, P.S. 23 BVBA
adr:;;Kroegberg 3;Leuven;;3000;Belgium
email;internet:xtof@huygens.biz
tel;cell:+32 496 47 55 64
x-mozilla-html:FALSE
url:www.huygens.biz
version:2.1
end:vcard


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2008-02-08 22:42 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-02-07 10:10 Cardbus/Yenta/PCI/2.6.24 help Christophe Huygens
2008-02-08 22:26 ` Christophe Huygens

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).