LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* 2.6.24.X: SATA/AHCI related boot delay.
@ 2008-03-09 18:22 Volker Armin Hemmann
  2008-03-10 13:05 ` Tejun Heo
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-03-09 18:22 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-ide

[-- Attachment #1: Type: text/plain, Size: 47704 bytes --]

Hi,

I have an Alive -NF5-esata2+. AM2 board with dual core AMD64 cpu.

Problem exists with latest bios 1.90 and its predecessor 1.80.

This board with nforce 520 chipset (MCP65) has three possible settings for the 
sata controller:
non-raid
raid
ahci.

My default is non-raid.

With 2.6.24 based kernels I get this on cold boot:

[   49.176044] Driver 'sd' needs updating - please use bus_type methods
[   49.176117] ahci 0000:00:0a.0: version 3.0
[   49.176291] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   49.176335] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   50.176871] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   50.176922] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[   50.176962] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   50.177163] scsi0 : ahci
[   50.177259] scsi1 : ahci
[   50.177325] scsi2 : ahci
[   50.177392] scsi3 : ahci
[   50.177480] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   50.177528] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   50.177575] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   50.177623] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   50.808824] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   80.743754] ata1.00: qc timeout (cmd 0xec)
[   80.743792] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   80.743831] ata1: failed to recover some devices, retrying in 5 secs
[   86.368194] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   86.368803] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   86.368846] ata1.00: 312581808 sectors, multi 16: LBA48
[   86.369491] ata1.00: configured for UDMA/133
[   87.000153] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   87.020703] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   87.020742] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   87.022737] ata2.00: configured for UDMA/133
[   87.339415] ata3: SATA link down (SStatus 0 SControl 300)
[   87.658721] ata4: SATA link down (SStatus 0 SControl 300)
[   87.658810] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   87.658917] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   87.658962] sd 0:0:0:0: [sda] Write Protect is off
[   87.659000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   87.659008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   87.659078] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   87.659121] sd 0:0:0:0: [sda] Write Protect is off
[   87.659159] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   87.659166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   87.659215]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   87.696698] sd 0:0:0:0: [sda] Attached SCSI disk
[   87.696832] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   87.696940] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   87.696985] sd 1:0:0:0: [sdb] Write Protect is off
[   87.697022] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   87.697031] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   87.697101] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   87.697144] sd 1:0:0:0: [sdb] Write Protect is off
[   87.697182] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   87.697189] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   87.697238]  sdb: sdb1 sdb2
[   87.720300] sd 1:0:0:0: [sdb] Attached SCSI disk
---------------------------------------------------------------------------------------

and this on reboots:

   30.984720] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   30.984771] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[   30.984811] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   30.985012] scsi0 : ahci
[   30.985108] scsi1 : ahci
[   30.985174] scsi2 : ahci
[   30.985241] scsi3 : ahci
[   30.985329] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   30.985377] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   30.985425] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   30.985472] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   36.619135] ata1: port is slow to respond, please be patient (Status 0xd0)
[   40.982984] ata1: softreset failed (device not ready)
[   41.614947] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   41.615582] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   41.615625] ata1.00: 312581808 sectors, multi 16: LBA48
[   41.616251] ata1.00: configured for UDMA/133
[   42.246907] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   42.250073] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   42.250113] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   42.252112] ata2.00: configured for UDMA/133
[   42.569539] ata3: SATA link down (SStatus 0 SControl 300)
[   42.888845] ata4: SATA link down (SStatus 0 SControl 300)
[   42.888934] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   42.889041] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   42.889086] sd 0:0:0:0: [sda] Write Protect is off
[   42.889124] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   42.889132] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   42.889202] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   42.889246] sd 0:0:0:0: [sda] Write Protect is off
[   42.889284] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   42.889291] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   42.889340]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   42.925936] sd 0:0:0:0: [sda] Attached SCSI disk
[   42.926071] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   42.926180] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   42.926224] sd 1:0:0:0: [sdb] Write Protect is off
[   42.926262] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   42.926271] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   42.926346] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   42.926389] sd 1:0:0:0: [sdb] Write Protect is off
[   42.926427] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   42.926434] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   42.926484]  sdb: sdb1 sdb2
[   42.955833] sd 1:0:0:0: [sdb] Attached SCSI disk
----------------------------------------------------------------------------------------

with 2.6.23.11 it looks like this:

[   90.956853] ide: Assuming 33MHz system bus speed for PIO modes; override 
with idebus=xx
[   90.957166] NFORCE-MCP65: IDE controller at PCI slot 0000:00:09.0
[   90.957335] NFORCE-MCP65: chipset revision 161
[   90.957494] NFORCE-MCP65: not 100% native mode: will probe irqs later
[   90.957658] NFORCE-MCP65: 0000:00:09.0 (rev a1) UDMA133 controller
[   90.957820]     ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, 
hdb:pio
[   90.958166] Probing IDE interface ide0...
[   91.246150] hda: SAMSUNG SP1213N, ATA DISK drive
[   91.888005] hda: selected mode 0x45
[   91.888070] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[   91.890652] hda: max request size: 512KiB
[   91.890861] hda: 234493056 sectors (120060 MB) w/8192KiB Cache, 
CHS=16383/255/63, UDMA(100)
[   91.891601] hda: cache flushes supported
[   91.891777]  hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
[   91.931121] ahci 0000:00:0a.0: version 2.3
[   91.931299] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   91.931465] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   92.935591] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   92.935888] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[   92.936049] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   92.936263] scsi0 : ahci
[   92.936486] scsi1 : ahci
[   92.936677] scsi2 : ahci
[   92.936867] scsi3 : ahci
[   92.937048] ata1: SATA max UDMA/133 cmd 0xffffc20000020100 ctl 
0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   92.937342] ata2: SATA max UDMA/133 cmd 0xffffc20000020180 ctl 
0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   92.937636] ata3: SATA max UDMA/133 cmd 0xffffc20000020200 ctl 
0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   92.937930] ata4: SATA max UDMA/133 cmd 0xffffc20000020280 ctl 
0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   93.411080] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   93.411883] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   93.412045] ata1.00: 312581808 sectors, multi 16: LBA48
[   93.412797] ata1.00: configured for UDMA/133
[   93.727032] ata2: SATA link down (SStatus 0 SControl 300)
[   94.042987] ata3: SATA link down (SStatus 0 SControl 300)
[   94.358941] ata4: SATA link down (SStatus 0 SControl 300)
[   94.359249] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   94.359599] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   94.359765] sd 0:0:0:0: [sda] Write Protect is off
[   94.359925] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   94.359933] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   94.360249] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   94.360414] sd 0:0:0:0: [sda] Write Protect is off
[   94.360573] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   94.360581] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   94.360873]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   94.402906] sd 0:0:0:0: [sda] Attached SCSI disk
[   94.403107] sd 0:0:0:0: Attached scsi generic sg0 type 0
---------------------------------------------------------------------------------------

I removed the pata-disk and the drivers some days ago - but that has had no 
influence on the problem. The delay was there with the pata-drive and drivers 
too. There are some changes in the config - but even with the 2.6.3.11 config 
on a 2.6.24 and make oldconfig showed the delays.

If I change from 'non raid' to AHCI (because the handbook says that is the way 
to get NCQ working) boot hangs for looong time and no harddisks are found:
(dmesg from systemrescuecd 1.0)
ahci 0000:00:0a.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> 
IRQ 18
ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
PCI: Setting latency timer of device 0000:00:0a.0 to 64
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 218
ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 218
ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 218
ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 218
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 00(40)
scsi_scan_2 used greatest stack depth: 2868 bytes left
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 40(40)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 40(40)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 40(40)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: failed to recover some devices, retrying in 5 secs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 40(40)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: failed to recover some devices, retrying in 5 secs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 40(40)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: failed to recover some devices, retrying in 5 secs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
pata_amd 0000:00:09.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:09.0 to 64
scsi7 : pata_amd
scsi8 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15

I tried systemrescuecd with the 'noapic' option - same result. Long hangs, no 
disks found.

lspci
00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1)
00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1)
00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a1)
00:0b.0 PCI bridge: nVidia Corporation Unknown device 045b (rev a1)
00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM 
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI 
Express Gigabit Ethernet controller (rev 01)
02:08.0 SCSI storage controller: Adaptec AHA-2944UW / AIC-7884U (rev 01)
02:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
04:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev 
a1)

dmesg
[    0.000000] Linux version 2.6.24.2reiser4 (root@energy) (gcc version 4.2.3 
(Gentoo 4.2.3 p1.0)) #6 SMP Tue Mar 4 17:28:59 CET 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       
97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       
97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 
20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       
97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       
97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       
97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       
97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         
1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 856 pages reserved
[    0.000000]   DMA zone: 3087 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 
00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 
00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 
0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 
00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 
00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 
00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 
00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 
00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 
00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 
00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 
00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 
0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: 
d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 1030519
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   48.747446] Marking TSC unstable due to TSCs unsynchronized
[   48.747447] time.c: Detected 3013.888 MHz processor.
[   48.751279] Console: colour VGA+ 80x25
[   48.751281] console [tty6] enabled
[   48.755890] Dentry cache hash table entries: 524288 (order: 10, 4194304 
bytes)
[   48.758116] Inode-cache hash table entries: 262144 (order: 9, 2097152 
bytes)
[   48.758884] Checking aperture...
[   48.758922] CPU 0: aperture @ ecc8000000 size 32 MB
[   48.758959] Aperture too small (32 MB)
[   48.764827] No AGP bridge found
[   48.764863] Your BIOS doesn't leave a aperture memory hole
[   48.764901] Please enable the IOMMU option in the BIOS setup
[   48.764939] This costs you 64 MB of RAM
[   48.790106] Mapping aperture over 65536 KB of RAM @ 8000000
[   48.813687] Memory: 4049936k/4980736k available (2204k kernel code, 143440k 
reserved, 681k data, 172k init)
[   48.813756] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, 
Nodes=1
[   48.893771] Calibrating delay using timer specific routine.. 6034.65 
BogoMIPS (lpj=10053840)
[   48.893864] Mount-cache hash table entries: 256
[   48.893972] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   48.894012] CPU: L2 Cache: 1024K (64 bytes/line)
[   48.894050] CPU: Physical Processor ID: 0
[   48.894086] CPU: Processor Core ID: 0
[   48.894139] SMP alternatives: switching to UP code
[   48.894504] ACPI: Core revision 20070126
[   48.929680] Using local APIC timer interrupts.
[   48.962824] APIC timer calibration result 12557873
[   48.962826] Detected 12.557 MHz APIC timer.
[   48.962910] SMP alternatives: switching to SMP code
[   48.963141] Booting processor 1/2 APIC 0x1
[   48.973258] Initializing CPU#1
[   49.056020] Calibrating delay using timer specific routine.. 6030.92 
BogoMIPS (lpj=10046281)
[   49.056024] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   49.056026] CPU: L2 Cache: 1024K (64 bytes/line)
[   49.056027] CPU: Physical Processor ID: 0
[   49.056028] CPU: Processor Core ID: 1
[   49.056109] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   49.056167] Brought up 2 CPUs
[   49.056624] net_namespace: 120 bytes
[   49.056866] NET: Registered protocol family 16
[   49.056978] ACPI: bus type pci registered
[   49.057060] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   49.057099] PCI: Not using MMCONFIG.
[   49.057135] PCI: Using configuration type 1
[   49.059381] ACPI: EC: Look up EC in DSDT
[   49.062825] ACPI: Interpreter enabled
[   49.062863] ACPI: (supports S0 S1 S3 S4 S5)
[   49.063033] ACPI: Using IOAPIC for interrupt routing
[   49.063242] Error attaching device data
[   49.063281] Error attaching device data
[   49.063320] Error attaching device data
[   49.063359] Error attaching device data
[   49.068281] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   49.068803] PCI: Transparent bridge - 0000:00:08.0
[   49.069095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   49.069228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   49.069326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   49.069382] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   49.069438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   49.069494] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   49.073455] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   49.073793] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   49.074127] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, 
disabled.
[   49.074487] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, 
disabled.
[   49.074847] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, 
disabled.
[   49.075207] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   49.075541] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, 
disabled.
[   49.075902] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   49.076239] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   49.076573] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, 
disabled.
[   49.076933] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   49.077267] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, 
disabled.
[   49.077628] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, 
disabled.
[   49.077988] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   49.078322] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, 
disabled.
[   49.078683] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   49.079017] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, 
disabled.
[   49.079415] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, 
disabled.
[   49.079776] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, 
disabled.
[   49.080137] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, 
disabled.
[   49.080456] Linux Plug and Play Support v0.97 (c) Adam Belay
[   49.080509] pnp: PnP ACPI init
[   49.080548] ACPI: bus type pnp registered
[   49.083088] pnp: PnP ACPI: found 13 devices
[   49.083125] ACPI: ACPI bus type pnp unregistered
[   49.083244] SCSI subsystem initialized
[   49.083300] libata version 3.00 loaded.
[   49.083353] usbcore: registered new interface driver usbfs
[   49.083407] usbcore: registered new interface driver hub
[   49.083464] usbcore: registered new device driver usb
[   49.083546] PCI: Using ACPI for IRQ routing
[   49.083584] PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
[   49.092621] PCI-DMA: Disabling AGP.
[   49.093359] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   49.093401] PCI-DMA: using GART IOMMU.
[   49.093441] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   49.093600] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   49.093739] hpet0: 3 32-bit timers, 25000000 Hz
[   49.095903] Time: hpet clocksource has been installed.
[   49.095951] Switched to high resolution mode on CPU 0
[   49.096038] Switched to high resolution mode on CPU 1
[   49.102635] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   49.102675] system 00:05: ioport range 0x800-0x80f has been reserved
[   49.102714] system 00:05: ioport range 0x2000-0x207f has been reserved
[   49.102754] system 00:05: ioport range 0x2080-0x20ff has been reserved
[   49.106152] system 00:05: ioport range 0x2400-0x247f has been reserved
[   49.106192] system 00:05: ioport range 0x2480-0x24ff has been reserved
[   49.106231] system 00:05: ioport range 0x2800-0x287f has been reserved
[   49.106270] system 00:05: ioport range 0x2880-0x28ff has been reserved
[   49.106309] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   49.106349] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[   49.106389] system 00:05: iomem range 0x0-0x0 could not be reserved
[   49.106428] system 00:05: iomem range 0xfee01000-0xfeefffff has been 
reserved
[   49.106472] system 00:07: iomem range 0xfec00000-0xfec00fff could not be 
reserved
[   49.106520] system 00:07: iomem range 0xfee00000-0xfee00fff could not be 
reserved
[   49.106570] system 00:0a: ioport range 0x290-0x29f has been reserved
[   49.106613] system 00:0b: iomem range 0xe0000000-0xefffffff has been 
reserved
[   49.106658] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   49.106698] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   49.106740] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   49.106780] system 00:0c: iomem range 0x100000-0xcfffffff could not be 
reserved
[   49.106827] system 00:0c: iomem range 0xff380000-0xffffffff could not be 
reserved
[   49.107108] PCI: Bridge: 0000:00:08.0
[   49.107145]   IO window: d000-dfff
[   49.107182]   MEM window: f9f00000-f9ffffff
[   49.107219]   PREFETCH window: disabled.
[   49.107257] PCI: Bridge: 0000:00:0b.0
[   49.107293]   IO window: c000-cfff
[   49.107330]   MEM window: f9e00000-f9efffff
[   49.107367]   PREFETCH window: disabled.
[   49.107404] PCI: Bridge: 0000:00:0c.0
[   49.107440]   IO window: disabled.
[   49.107476]   MEM window: disabled.
[   49.107512]   PREFETCH window: disabled.
[   49.107549] PCI: Bridge: 0000:00:0d.0
[   49.107585]   IO window: e000-efff
[   49.107622]   MEM window: fa000000-febfffff
[   49.107659]   PREFETCH window: d0000000-dfffffff
[   49.107697] PCI: Bridge: 0000:00:0e.0
[   49.107733]   IO window: disabled.
[   49.107769]   MEM window: disabled.
[   49.107805]   PREFETCH window: disabled.
[   49.107848] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   49.107857] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   49.107862] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   49.107866] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   49.107871] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   49.107877] NET: Registered protocol family 2
[   49.139202] IP route cache hash table entries: 131072 (order: 8, 1048576 
bytes)
[   49.139805] TCP established hash table entries: 262144 (order: 10, 4194304 
bytes)
[   49.141228] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   49.141693] TCP: Hash tables configured (established 262144 bind 65536)
[   49.141733] TCP reno registered
[   49.149967] Loading Reiser4. See www.namesys.com for a description of 
Reiser4.
[   49.150075] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
254)
[   49.150123] io scheduler noop registered
[   49.150161] io scheduler cfq registered (default)
[   49.150855] Boot video device is 0000:04:00.0
[   49.150958] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   49.150975] assign_interrupt_mode Found MSI capability
[   49.151029] Allocate Port Service[0000:00:0b.0:pcie00]
[   49.151071] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   49.151087] assign_interrupt_mode Found MSI capability
[   49.151135] Allocate Port Service[0000:00:0c.0:pcie00]
[   49.151172] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   49.151187] assign_interrupt_mode Found MSI capability
[   49.151235] Allocate Port Service[0000:00:0d.0:pcie00]
[   49.151274] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   49.151290] assign_interrupt_mode Found MSI capability
[   49.151338] Allocate Port Service[0000:00:0e.0:pcie00]
[   49.151515] input: Power Button (FF) as /class/input/input0
[   49.151553] ACPI: Power Button (FF) [PWRF]
[   49.151638] input: Power Button (CM) as /class/input/input1
[   49.151676] ACPI: Power Button (CM) [PWRB]
[   49.151812] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   49.151917] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   49.175824] Real Time Clock Driver v1.12ac
[   49.175942] hpet_resources: 0xfed00000 is busy
[   49.175960] Linux agpgart interface v0.102
[   49.176044] Driver 'sd' needs updating - please use bus_type methods
[   49.176117] ahci 0000:00:0a.0: version 3.0
[   49.176291] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   49.176335] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   50.176871] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   50.176922] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[   50.176962] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   50.177163] scsi0 : ahci
[   50.177259] scsi1 : ahci
[   50.177325] scsi2 : ahci
[   50.177392] scsi3 : ahci
[   50.177480] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   50.177528] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   50.177575] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   50.177623] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   50.808824] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   80.743754] ata1.00: qc timeout (cmd 0xec)
[   80.743792] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   80.743831] ata1: failed to recover some devices, retrying in 5 secs
[   86.368194] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   86.368803] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   86.368846] ata1.00: 312581808 sectors, multi 16: LBA48
[   86.369491] ata1.00: configured for UDMA/133
[   87.000153] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   87.020703] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   87.020742] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   87.022737] ata2.00: configured for UDMA/133
[   87.339415] ata3: SATA link down (SStatus 0 SControl 300)
[   87.658721] ata4: SATA link down (SStatus 0 SControl 300)
[   87.658810] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   87.658917] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   87.658962] sd 0:0:0:0: [sda] Write Protect is off
[   87.659000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   87.659008] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   87.659078] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   87.659121] sd 0:0:0:0: [sda] Write Protect is off
[   87.659159] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   87.659166] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   87.659215]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   87.696698] sd 0:0:0:0: [sda] Attached SCSI disk
[   87.696832] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   87.696940] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   87.696985] sd 1:0:0:0: [sdb] Write Protect is off
[   87.697022] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   87.697031] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   87.697101] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   87.697144] sd 1:0:0:0: [sdb] Write Protect is off
[   87.697182] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   87.697189] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   87.697238]  sdb: sdb1 sdb2
[   87.720300] sd 1:0:0:0: [sdb] Attached SCSI disk
[   87.720614] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   87.720659] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 
(level, low) -> IRQ 22
[   87.720952] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   87.720956] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   87.721072] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus 
number 1
[   87.721146] ehci_hcd 0000:00:02.1: debug port 1
[   87.721185] PCI: cache line size of 64 is not supported by device 
0000:00:02.1
[   87.721193] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   87.729429] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 
Dec 2004
[   87.729591] usb usb1: configuration #1 chosen from 1 choice
[   87.729657] hub 1-0:1.0: USB hub found
[   87.729698] hub 1-0:1.0: 10 ports detected
[   87.831809] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 
irq 1,12
[   87.834655] serio: i8042 KBD port at 0x60,0x64 irq 1
[   87.834694] serio: i8042 AUX port at 0x60,0x64 irq 12
[   87.890390] input: AT Translated Set 2 keyboard as /class/input/input2
[   88.057853] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   88.182269] usb 1-3: configuration #1 chosen from 1 choice
[   88.182606] hub 1-3:1.0: USB hub found
[   88.182959] hub 1-3:1.0: 4 ports detected
[   88.510234] usb 1-5: new high speed USB device using ehci_hcd and address 3
[   88.639370] usb 1-5: configuration #1 chosen from 1 choice
[   88.826522] usb 1-3.1: new low speed USB device using ehci_hcd and address 
4
[   88.928973] usb 1-3.1: configuration #1 chosen from 1 choice
[   89.122483] usb 1-3.4: new high speed USB device using ehci_hcd and address 
5
[   89.195695] usb 1-3.4: device descriptor read/64, error -71
[   89.371925] usb 1-3.4: device descriptor read/64, error -71
[   89.541544] usb 1-3.4: new high speed USB device using ehci_hcd and address 
6
[   89.614755] usb 1-3.4: device descriptor read/64, error -71
[   89.790985] usb 1-3.4: device descriptor read/64, error -71
[   89.960730] usb 1-3.4: new high speed USB device using ehci_hcd and address 
7
[   90.366204] usb 1-3.4: device not accepting address 7, error -71
[   90.432921] usb 1-3.4: new high speed USB device using ehci_hcd and address 
8
[   90.838511] usb 1-3.4: device not accepting address 8, error -71
[   90.843129] input: Logitech USB Receiver as /class/input/input3
[   90.859316] input: USB HID v1.11 Mouse [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   90.865040] input: Logitech USB Receiver as /class/input/input4
[   90.885926] input: USB HID v1.11 Device [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   90.886029] usbcore: registered new interface driver usbhid
[   90.886068] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   90.886113] TCP cubic registered
[   90.886152] NET: Registered protocol family 1
[   90.886209] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 
6000+ processors (2 cpu cores) (version 2.20.00)
[   90.886262] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   90.886301] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   90.886339] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   90.886378] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   90.886416] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   90.886454] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   90.889850] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   90.889889] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   90.900783] ReiserFS: sda3: found reiserfs format "3.6" with standard 
journal
[   90.900825] ReiserFS: sda3: using ordered data mode
[   90.910333] ReiserFS: sda3: journal params: device sda3, size 8192, journal 
first block 18, max trans len 1024, max batch 900, max commit age 30, max 
trans age 30
[   90.911226] ReiserFS: sda3: checking transaction log (sda3)
[   90.954640] ReiserFS: sda3: Using r5 hash to sort names
[   90.954690] VFS: Mounted root (reiserfs filesystem) readonly.
[   90.954740] Freeing unused kernel memory: 172k freed
[   91.040511] Clocksource tsc unstable (delta = -144182848 ns)
[   92.705141] ReiserFS: sda3: switching to journaled data mode
[   92.875659] r8169 Gigabit Ethernet driver 2.2LK loaded
[   92.875868] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   92.875873] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 
(level, low) -> IRQ 19
[   92.875881] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   92.876029] eth0: RTL8168b/8111b at 0xffffc20000172000, 00:19:66:47:f3:cb, 
XID 38000000 IRQ 314
[   93.020810] reiser4: sdb2: found disk format 4.0.0.
[  101.258255] reiser4: sda6: found disk format 4.0.0.
[  101.716150] reiser4: sdb1: found disk format 4.0.0.
[  102.062717] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 
across:1951888k
[  103.594035] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[  103.594041] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 
(level, low) -> IRQ 18
[  103.595129] Audigy2 value: Special config.
[  105.122084] w83627ehf: Found W83627EHG chip at 0x290
[  106.260422] r8169: eth0: link up
[  106.260427] r8169: eth0: link up
[  106.747221] NET: Registered protocol family 17
[  110.231622] nvidia: module license 'NVIDIA' taints kernel.
[  110.403019] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[  110.403027] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNED] -> GSI 17 
(level, low) -> IRQ 17
[  110.403032] PCI: Setting latency timer of device 0000:04:00.0 to 64
[  110.403117] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  171.06  Wed Feb 
20 09:02:26 PST 2008
[  299.415650] usb 1-3.2: new full speed USB device using ehci_hcd and address 
9
[  299.483823] usb 1-3.2: configuration #1 chosen from 2 choices
[  299.509674] Initializing USB Mass Storage driver...
[  299.509771] scsi4 : SCSI emulation for USB Mass Storage devices
[  299.509315] usb-storage: device found at 9
[  299.509318] usb-storage: waiting for device to settle before scanning
[  299.509821] usbcore: registered new interface driver usb-storage
[  299.509823] USB Mass Storage support registered.
[  302.973619] scsi 4:0:0:0: Direct-Access     Motorola Motorola Phone   2.31 
PQ: 0 ANSI: 2
[  303.092568] sd 4:0:0:0: [sdc] 979456 512-byte hardware sectors (501 MB)
[  303.100559] sd 4:0:0:0: [sdc] Write Protect is off
[  303.100563] sd 4:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[  303.100574] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[  303.130402] sd 4:0:0:0: [sdc] 979456 512-byte hardware sectors (501 MB)
[  303.138545] sd 4:0:0:0: [sdc] Write Protect is off
[  303.138548] sd 4:0:0:0: [sdc] Mode Sense: 0b 00 00 08
[  303.138550] sd 4:0:0:0: [sdc] Assuming drive cache: write through
[  303.138552]  sdc: sdc1
[  303.161436] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[  303.161600] usb-storage: device scan complete
[  303.176188] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  303.176213] sd 1:0:0:0: Attached scsi generic sg1 type 0
[  303.176238] sd 4:0:0:0: Attached scsi generic sg2 type 0

cat /proc/interrupts
           CPU0       CPU1
  0:         56          1   IO-APIC-edge      timer
  1:         11       4589   IO-APIC-edge      i8042
  8:          0          1   IO-APIC-edge      rtc
  9:          0          1   IO-APIC-fasteoi   acpi
 12:          0          3   IO-APIC-edge      i8042
 17:         26      70891   IO-APIC-fasteoi   nvidia
 18:          0          0   IO-APIC-fasteoi   EMU10K1
 22:         49      30631   IO-APIC-fasteoi   ehci_hcd:usb1
314:          9       4439   PCI-MSI-edge      eth0
315:         32      27847   PCI-MSI-edge      ahci
NMI:          0          0   Non-maskable interrupts
LOC:     105026     170031   Local timer interrupts
RES:      27983      12360   Rescheduling interrupts
CAL:       1902        237   function call interrupts
TLB:       5129       4330   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
SPU:          0          0   Spurious interrupts
ERR:          0

cat /proc/cpuinfo
processor       : 0
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 67
model name      : AMD Athlon(tm) 64 X2 Dual Core Processor 6000+
stepping        : 3
cpu MHz         : 2000.000
cache size      : 1024 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp 
lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
bogomips        : 4023.10
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc

processor       : 1
vendor_id       : AuthenticAMD
cpu family      : 15
model           : 67
model name      : AMD Athlon(tm) 64 X2 Dual Core Processor 6000+
stepping        : 3
cpu MHz         : 2000.000
cache size      : 1024 KB
physical id     : 0
siblings        : 2
core id         : 1
cpu cores       : 2
fpu             : yes
fpu_exception   : yes
cpuid level     : 1
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca 
cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp 
lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy
bogomips        : 4023.10
TLB size        : 1024 4K pages
clflush size    : 64
cache_alignment : 64
address sizes   : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp tm stc

 sh /usr/src/linux/scripts/ver_linux
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux energy 2.6.24.2reiser4 #6 SMP Tue Mar 4 17:28:59 CET 2008 x86_64 AMD 
Athlon(tm) 64 X2 Dual Core Processor 6000+ AuthenticAMD GNU/Linux

Gnu C                  4.2.3
Gnu make               3.81
binutils               2.18.50.0.4.20080208
util-linux             2.13.1
mount                  2.13.1
module-init-tools      3.4
e2fsprogs              1.40.6
reiserfsprogs          3.6.19
reiser4progs           1.0.6
PPP                    2.4.4
Linux C Library        2.7
Dynamic linker (ldd)   2.7
Procps                 3.2.7
Net-tools              1.60
Kbd                    1.13
Sh-utils               6.10
udev                   118
Modules Loaded         nls_iso8859_15 nls_cp850 vfat fat nls_base sg 
usb_storage nvidia af_packet k8temp w83627ehf hwmon_vid hwmon i2c_core 
snd_seq_midi snd_emu10k1_synth snd_emux_synth snd_seq_virmidi 
snd_seq_midi_emul snd_pcm_oss snd_mixer_oss snd_seq_oss snd_seq_midi_event 
snd_seq snd_emu10k1 snd_rawmidi firmware_class snd_ac97_codec ac97_bus 
snd_pcm snd_seq_device snd_timer snd_page_alloc snd_util_mem snd_hwdep snd 
soundcore r8169

If you want/need more information or want me to do something please ask me 
directly - I am not subscribed to any of the two lists. If I need to RTFM 
please point me to the right FM.

Glück Auf,
Volker

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 38384 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24.2
# Tue Mar  4 17:20:19 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
# CONFIG_QUICKLIST is not set
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="reiser4"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
# CONFIG_FAIR_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_VSMP is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND_SMP_POSSIBLE=y
CONFIG_SUSPEND=y
CONFIG_HIBERNATION_SMP_POSSIBLE=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=16
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
CONFIG_VIDEO_EM28XX=m
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET is not set
# CONFIG_DVB_BUDGET_CI is not set
# CONFIG_DVB_BUDGET_AV is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_TDA10086 is not set

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set

#
# Tuners/PLL support
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TDA827X is not set
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set

#
# Miscellaneous devices
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_TUA6100 is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_TUNER_CUSTOMIZE=y
CONFIG_TUNER_MT20XX=m
CONFIG_TUNER_TDA8290=m
CONFIG_TUNER_TEA5761=m
CONFIG_TUNER_TEA5767=m
CONFIG_TUNER_SIMPLE=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_REISER4_FS=y
# CONFIG_REISER4_DEBUG is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-15"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay.
  2008-03-09 18:22 2.6.24.X: SATA/AHCI related boot delay Volker Armin Hemmann
@ 2008-03-10 13:05 ` Tejun Heo
  2008-03-10 16:57   ` Volker Armin Hemmann
                     ` (2 more replies)
  0 siblings, 3 replies; 52+ messages in thread
From: Tejun Heo @ 2008-03-10 13:05 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide

[-- Attachment #1: Type: text/plain, Size: 2603 bytes --]

Volker Armin Hemmann wrote:
> Hi,
> 
> I have an Alive -NF5-esata2+. AM2 board with dual core AMD64 cpu.
> 
> Problem exists with latest bios 1.90 and its predecessor 1.80.
> 
> This board with nforce 520 chipset (MCP65) has three possible settings for the 
> sata controller:
> non-raid
> raid
> ahci.
> 
> My default is non-raid.
> 
> With 2.6.24 based kernels I get this on cold boot:
> 
> [   50.808824] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   80.743754] ata1.00: qc timeout (cmd 0xec)
> [   80.743792] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)

Does "irqpoll" make any difference?  Also, does the attached patch help?

> and this on reboots:
> 
> [   36.619135] ata1: port is slow to respond, please be patient (Status 0xd0)
> [   40.982984] ata1: softreset failed (device not ready)

Is this consistent?  Do you always get IDENTIFY timeout on cold boots
and softreset failure on reboots?

> with 2.6.23.11 it looks like this:

Hmmm...

> I removed the pata-disk and the drivers some days ago - but that has had no 
> influence on the problem. The delay was there with the pata-drive and drivers 
> too. There are some changes in the config - but even with the 2.6.3.11 config 
> on a 2.6.24 and make oldconfig showed the delays.
> 
> If I change from 'non raid' to AHCI (because the handbook says that is the way 
> to get NCQ working) boot hangs for looong time and no harddisks are found:
> (dmesg from systemrescuecd 1.0)
> ahci 0000:00:0a.0: version 3.0
> ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
> ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> 
> IRQ 18
> ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
> PCI: Setting latency timer of device 0000:00:0a.0 to 64
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> scsi6 : ahci
> ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 218
> ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 218
> ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 218
> ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 218
> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> APIC error on CPU0: 00(40)
> scsi_scan_2 used greatest stack depth: 2868 bytes left
> ata1.00: qc timeout (cmd 0xec)
> ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> ata1: failed to recover some devices, retrying in 5 secs

This one definitely looks like a misrouted IRQ.  irqpoll should help.
This failure is the same for 2.6.23 and 24, right?

-- 
tejun

[-- Attachment #2: debug --]
[-- Type: text/plain, Size: 506 bytes --]

---
 drivers/ata/ahci.c |    1 +
 1 file changed, 1 insertion(+)

Index: tree2/drivers/ata/ahci.c
===================================================================
--- tree2.orig/drivers/ata/ahci.c
+++ tree2/drivers/ata/ahci.c
@@ -397,6 +397,7 @@ static const struct ata_port_operations 
 static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci */
 	{
+		AHCI_HFLAGS	(AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
 		.link_flags	= AHCI_LFLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay.
  2008-03-10 13:05 ` Tejun Heo
@ 2008-03-10 16:57   ` Volker Armin Hemmann
  2008-03-16  8:34   ` Volker Armin Hemmann
  2008-03-17  7:16   ` 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3 Volker Armin Hemmann
  2 siblings, 0 replies; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-03-10 16:57 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide

On Montag, 10. März 2008, Tejun Heo wrote:

> >
> > With 2.6.24 based kernels I get this on cold boot:
> >
> > [   50.808824] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > [   80.743754] ata1.00: qc timeout (cmd 0xec)
> > [   80.743792] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
>
> Does "irqpoll" make any difference?  Also, does the attached patch help?

irqpoll doesn't make any difference on cold boot or reboot (just adding 
irqpoll to kernel boot line, right?).

The attached patch does not change anything (except this:
ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
 as you can see in the dmesg parts below).

Here are several dmesg-parts:

dmesg part of cold boot with irqpoll but no patch:

[   28.256323] Driver 'sd' needs updating - please use bus_type methods
[   28.256396] ahci 0000:00:0a.0: version 3.0
[   28.256570] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   28.256614] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   29.257150] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   29.257202] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[   29.257241] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   29.257442] scsi0 : ahci
[   29.257538] scsi1 : ahci
[   29.257604] scsi2 : ahci
[   29.257671] scsi3 : ahci
[   29.257760] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   29.257808] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   29.257855] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   29.257903] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   29.889103] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   59.824033] ata1.00: qc timeout (cmd 0xec)
[   59.824072] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   59.824111] ata1: failed to recover some devices, retrying in 5 secs
[   65.448472] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   65.449133] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   65.449176] ata1.00: 312581808 sectors, multi 16: LBA48
[   65.449814] ata1.00: configured for UDMA/133
[   66.080432] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   66.083950] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   66.083989] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   66.085988] ata2.00: configured for UDMA/133
[   66.403064] ata3: SATA link down (SStatus 0 SControl 300)
[   66.722369] ata4: SATA link down (SStatus 0 SControl 300)
[   66.722458] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   66.722566] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   66.722611] sd 0:0:0:0: [sda] Write Protect is off
[   66.722649] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   66.722657] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   66.722727] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   66.722771] sd 0:0:0:0: [sda] Write Protect is off
[   66.722808] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   66.722816] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   66.722865]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   66.748447] sd 0:0:0:0: [sda] Attached SCSI disk
[   66.748580] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   66.748688] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   66.748733] sd 1:0:0:0: [sdb] Write Protect is off
[   66.748771] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   66.748779] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   66.748849] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   66.748892] sd 1:0:0:0: [sdb] Write Protect is off
[   66.748930] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   66.748938] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   66.748987]  sdb: sdb1 sdb2
[   66.779349] sd 1:0:0:0: [sdb] Attached SCSI disk

--------------------------------------------------------------------------------

dmesg-part of reboot with patch and without irqpoll:

[   28.104714] Driver 'sd' needs updating - please use bus_type methods
[   28.104787] ahci 0000:00:0a.0: version 3.0
[   28.104961] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   28.105004] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   28.105342] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[   29.105540] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   29.105588] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio
[   29.105628] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   29.105828] scsi0 : ahci
[   29.105924] scsi1 : ahci
[   29.105990] scsi2 : ahci
[   29.106057] scsi3 : ahci
[   29.106145] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   29.106193] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   29.106240] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   29.106288] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   34.580304] ata1: port is slow to respond, please be patient (Status 0xd0)
[   39.423111] ata1: softreset failed (device not ready)
[   39.895423] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   39.896058] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   39.896101] ata1.00: 312581808 sectors, multi 16: LBA48
[   39.896737] ata1.00: configured for UDMA/133
[   40.367728] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   40.381404] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   40.381443] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   40.383449] ata2.00: configured for UDMA/133
[   40.693685] ata3: SATA link down (SStatus 0 SControl 300)
[   41.006339] ata4: SATA link down (SStatus 0 SControl 300)
[   41.006428] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   41.006536] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   41.006581] sd 0:0:0:0: [sda] Write Protect is off
[   41.006618] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   41.006626] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   41.006696] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   41.006739] sd 0:0:0:0: [sda] Write Protect is off
[   41.006777] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   41.006784] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   41.006833]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   41.040248] sd 0:0:0:0: [sda] Attached SCSI disk
[   41.040383] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   41.040491] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   41.040541] sd 1:0:0:0: [sdb] Write Protect is off
[   41.040579] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   41.040588] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   41.040658] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   41.040700] sd 1:0:0:0: [sdb] Write Protect is off
[   41.040738] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   41.040746] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   41.040795]  sdb: sdb1 sdb2
[   41.083031] sd 1:0:0:0: [sdb] Attached SCSI disk

---------------------------------------------------------------------------------

dmesg-part of cold boot with your patch and without irqpoll:

[   42.331101] Driver 'sd' needs updating - please use bus_type methods
[   42.331174] ahci 0000:00:0a.0: version 3.0
[   42.331348] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   42.331391] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   42.331728] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[   43.331928] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   43.331976] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio
[   43.332015] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   43.332216] scsi0 : ahci
[   43.332312] scsi1 : ahci
[   43.332378] scsi2 : ahci
[   43.332444] scsi3 : ahci
[   43.332533] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   43.332581] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   43.332628] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   43.332675] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   43.804230] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   73.739161] ata1.00: qc timeout (cmd 0xec)
[   73.739200] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   73.739238] ata1: failed to recover some devices, retrying in 5 secs
[   79.203946] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   79.204575] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   79.204617] ata1.00: 312581808 sectors, multi 16: LBA48
[   79.205269] ata1.00: configured for UDMA/133
[   79.676252] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   79.696817] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   79.696857] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   79.698846] ata2.00: configured for UDMA/133
[   80.008861] ata3: SATA link down (SStatus 0 SControl 300)
[   80.321514] ata4: SATA link down (SStatus 0 SControl 300)
[   80.321604] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   80.321712] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   80.321756] sd 0:0:0:0: [sda] Write Protect is off
[   80.321794] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   80.321802] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   80.321872] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   80.321915] sd 0:0:0:0: [sda] Write Protect is off
[   80.321952] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   80.321959] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   80.322008]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   80.353592] sd 0:0:0:0: [sda] Attached SCSI disk
[   80.353724] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   80.353832] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   80.353877] sd 1:0:0:0: [sdb] Write Protect is off
[   80.353915] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   80.353923] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   80.353993] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   80.354036] sd 1:0:0:0: [sdb] Write Protect is off
[   80.354074] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   80.354081] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   80.354130]  sdb: sdb1 sdb2
[   80.360468] sd 1:0:0:0: [sdb] Attached SCSI disk

------------------------------------------------------------------------------------

dmesg part of cold boot with your patch and irqpoll:

[   38.535559] Driver 'sd' needs updating - please use bus_type methods
[   38.535632] ahci 0000:00:0a.0: version 3.0
[   38.535806] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   38.535850] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   38.536187] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[   39.536386] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   39.536435] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio
[   39.536474] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   39.536675] scsi0 : ahci
[   39.536771] scsi1 : ahci
[   39.536838] scsi2 : ahci
[   39.536904] scsi3 : ahci
[   39.536993] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   39.537041] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   39.537088] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   39.537135] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   40.008689] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   69.943620] ata1.00: qc timeout (cmd 0xec)
[   69.943658] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   69.943697] ata1: failed to recover some devices, retrying in 5 secs
[   75.408405] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   75.409006] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   75.409049] ata1.00: 312581808 sectors, multi 16: LBA48
[   75.409721] ata1.00: configured for UDMA/133
[   75.880711] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   75.901259] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   75.901298] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   75.903294] ata2.00: configured for UDMA/133
[   76.213320] ata3: SATA link down (SStatus 0 SControl 300)
[   76.525973] ata4: SATA link down (SStatus 0 SControl 300)
[   76.526062] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   76.526170] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   76.526215] sd 0:0:0:0: [sda] Write Protect is off
[   76.526252] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   76.526261] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   76.526330] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   76.526374] sd 0:0:0:0: [sda] Write Protect is off
[   76.526411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   76.526418] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   76.526467]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   76.555492] sd 0:0:0:0: [sda] Attached SCSI disk
[   76.555626] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   76.555735] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   76.555779] sd 1:0:0:0: [sdb] Write Protect is off
[   76.555817] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   76.555826] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   76.555895] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   76.555944] sd 1:0:0:0: [sdb] Write Protect is off
[   76.555981] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   76.555989] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   76.556038]  sdb: sdb1 sdb2
[   76.616249] sd 1:0:0:0: [sdb] Attached SCSI disk

-----------------------------------------------------------------------------------------------

If you want me to try more things, just drop a note - or the complete dmesgs.


>
> > and this on reboots:
> >
> > [   36.619135] ata1: port is slow to respond, please be patient (Status
> > 0xd0) [   40.982984] ata1: softreset failed (device not ready)
>
> Is this consistent?  Do you always get IDENTIFY timeout on cold boots
> and softreset failure on reboots?

yes. I don't watch every (re)boot. But evertime I look into dmesg I see the 
IDENTIFY timeout or the softreset failure.

Cold-boot, entering bios, change something, save changes, reboot on exit 
counts as 'cold boot'.

> > If I change from 'non raid' to AHCI (because the handbook says that is
> > the way to get NCQ working) boot hangs for looong time and no harddisks
> > are found: (dmesg from systemrescuecd 1.0)
> > ahci 0000:00:0a.0: version 3.0
> > ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
> > ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low)
> > -> IRQ 18
> > ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA
> > mode ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
> > PCI: Setting latency timer of device 0000:00:0a.0 to 64
> > scsi3 : ahci
> > scsi4 : ahci
> > scsi5 : ahci
> > scsi6 : ahci
> > ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 218
> > ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 218
> > ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 218
> > ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 218
> > ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > APIC error on CPU0: 00(40)
> > scsi_scan_2 used greatest stack depth: 2868 bytes left
> > ata1.00: qc timeout (cmd 0xec)
> > ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
> > ata1: failed to recover some devices, retrying in 5 secs
>
> This one definitely looks like a misrouted IRQ.  irqpoll should help.
> This failure is the same for 2.6.23 and 24, right?

yes. This failure has been with all kernels and bios versions I ever tried. I 
only added it to show that I tried different bios settings.

With irqpoll the Interrupt reported changes from 218 to 315 (but this 
might be caused by the different kernels). But irqpoll does not help - and 
with the appropriate kernel-panic because no root-fs found. I can do some 
more (re)boots to check that.

Thanks for looking into this.

Glück Auf,
Volker


^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay.
  2008-03-10 13:05 ` Tejun Heo
  2008-03-10 16:57   ` Volker Armin Hemmann
@ 2008-03-16  8:34   ` Volker Armin Hemmann
  2008-03-17  7:16   ` 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3 Volker Armin Hemmann
  2 siblings, 0 replies; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-03-16  8:34 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide

[-- Attachment #1: Type: text/plain, Size: 3865 bytes --]

Hi,

I tried three more kernels.

2.6.25-rc5
2.6.23.17
and
2.6.23.11

and I get the same result with all three of them which is puzzling for me, 
because once 2.6.23.11 was ok and first came the timeouts then the timeouts 
and then the hardware changes (PATA harddisk replaced with SATA harddisk).

this is with 2.6.25-rc5 on a coldboot:

    1.360551] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[    1.360551] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[    1.360551] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.360553] scsi0 : ahci
[    1.360567] scsi1 : ahci
[    1.360578] scsi2 : ahci
[    1.360591] scsi3 : ahci
[    1.360597] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[    1.360597] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[    1.360597] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[    1.360597] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[    1.794389] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   31.794187] ata1.00: qc timeout (cmd 0xec)
[   31.794187] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   31.794187] ata1: failed to recover some devices, retrying in 5 secs
[   37.431961] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   37.432460] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   37.432460] ata1.00: 312581808 sectors, multi 16: LBA48
[   37.432990] ata1.00: configured for UDMA/133
[   38.064932] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   38.085423] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   38.085423] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   38.087332] ata2.00: configured for UDMA/133
[   38.404590] ata3: SATA link down (SStatus 0 SControl 300)
[   38.724459] ata4: SATA link down (SStatus 0 SControl 300)
[   38.923769] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   38.923781] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   38.923781] sd 0:0:0:0: [sda] Write Protect is off
[   38.923782] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   38.923782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   38.923782] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   38.923782] sd 0:0:0:0: [sda] Write Protect is off
[   38.923782] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   38.923782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   38.923782]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   38.756509] sd 0:0:0:0: [sda] Attached SCSI disk
[   38.756520] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   38.756526] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   38.756526] sd 1:0:0:0: [sdb] Write Protect is off
[   38.756526] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   38.756526] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   38.756526] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   38.756526] sd 1:0:0:0: [sdb] Write Protect is off
[   38.756526] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   38.756526] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   38.756526]  sdb: sdb1 sdb2

complete dmesgs are attached. Please ignore the kernel names. After 
doing 'make oldconfig' I forgot to remove the 'reiser4_ahci_debug' part. All 
three kernels are built from unpatched sources.
All I did was copying the config of 2.6.24 and doing make oldconfig.

If  there is something I could/should try/do please tell me so.

Glück Auf,
Volker

[-- Attachment #2: dmesg_2.6.23.11_coldboot --]
[-- Type: text/plain, Size: 24235 bytes --]

[    0.000000] Linux version 2.6.23.11 (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Sun Mar 16 09:07:15 CET 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 753 pages reserved
[    0.000000]   DMA zone: 3190 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 29416 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order.  Total pages: 1030622
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[   30.622165] time.c: Detected 3013.887 MHz processor.
[   30.625985] Console: colour VGA+ 80x25
[   30.625987] console [tty6] enabled
[   30.630562] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   30.632903] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   30.633672] Checking aperture...
[   30.633710] CPU 0: aperture @ ec8a000000 size 32 MB
[   30.633747] Aperture too small (32 MB)
[   30.639571] No AGP bridge found
[   30.639606] Your BIOS doesn't leave a aperture memory hole
[   30.639644] Please enable the IOMMU option in the BIOS setup
[   30.639682] This costs you 64 MB of RAM
[   30.664870] Mapping aperture over 65536 KB of RAM @ 8000000
[   30.688055] Memory: 4050348k/4980736k available (1882k kernel code, 143028k reserved, 592k data, 172k init)
[   30.688125] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   30.768661] Calibrating delay using timer specific routine.. 6034.64 BogoMIPS (lpj=10053828)
[   30.768753] Mount-cache hash table entries: 256
[   30.768858] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   30.768898] CPU: L2 Cache: 1024K (64 bytes/line)
[   30.768936] CPU: Physical Processor ID: 0
[   30.768972] CPU: Processor Core ID: 0
[   30.769025] SMP alternatives: switching to UP code
[   30.769342] ACPI: Core revision 20070126
[   30.804508] Using local APIC timer interrupts.
[   30.837651] result 12557871
[   30.837686] Detected 12.557 MHz APIC timer.
[   30.838540] SMP alternatives: switching to SMP code
[   30.838744] Booting processor 1/2 APIC 0x1
[   30.849067] Initializing CPU#1
[   30.931859] Calibrating delay using timer specific routine.. 6030.01 BogoMIPS (lpj=10046417)
[   30.931863] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   30.931865] CPU: L2 Cache: 1024K (64 bytes/line)
[   30.931866] CPU: Physical Processor ID: 0
[   30.931867] CPU: Processor Core ID: 1
[   30.931948] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   30.934954] Brought up 2 CPUs
[   30.935431] NET: Registered protocol family 16
[   30.935540] ACPI: bus type pci registered
[   30.935622] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   30.935661] PCI: Not using MMCONFIG.
[   30.935698] PCI: Using configuration type 1
[   30.938097] ACPI: EC: Look up EC in DSDT
[   30.941714] ACPI: Interpreter enabled
[   30.941751] ACPI: (supports S0 S1 S3 S4 S5)
[   30.941921] ACPI: Using IOAPIC for interrupt routing
[   30.942217] Error attaching device data
[   30.942256] Error attaching device data
[   30.942294] Error attaching device data
[   30.942333] Error attaching device data
[   30.948094] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   30.948609] PCI: Transparent bridge - 0000:00:08.0
[   30.948925] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   30.949068] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   30.949178] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   30.949243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   30.949307] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   30.949371] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   30.953746] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   30.954101] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   30.954453] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[   30.954829] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[   30.955224] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[   30.955601] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   30.955952] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[   30.956328] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   30.956679] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   30.957029] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[   30.957405] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   30.957756] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[   30.958133] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[   30.958525] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   30.958876] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[   30.959254] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   30.959605] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[   30.960008] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[   30.960385] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[   30.960762] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[   30.961092] Linux Plug and Play Support v0.97 (c) Adam Belay
[   30.961143] pnp: PnP ACPI init
[   30.961183] ACPI: bus type pnp registered
[   30.964050] pnp: PnP ACPI: found 13 devices
[   30.964087] ACPI: ACPI bus type pnp unregistered
[   30.964202] SCSI subsystem initialized
[   30.964262] libata version 2.21 loaded.
[   30.964313] usbcore: registered new interface driver usbfs
[   30.964367] usbcore: registered new interface driver hub
[   30.964424] usbcore: registered new device driver usb
[   30.964508] PCI: Using ACPI for IRQ routing
[   30.964546] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   30.974899] PCI-DMA: Disabling AGP.
[   30.975639] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   30.975680] PCI-DMA: using GART IOMMU.
[   30.975719] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   30.975877] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   30.976015] hpet0: 3 32-bit timers, 25000000 Hz
[   30.978189] Time: hpet clocksource has been installed.
[   30.988213] pnp: 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   30.988252] pnp: 00:05: ioport range 0x800-0x80f has been reserved
[   30.988291] pnp: 00:05: ioport range 0x2000-0x207f has been reserved
[   30.988330] pnp: 00:05: ioport range 0x2080-0x20ff has been reserved
[   30.988369] pnp: 00:05: ioport range 0x2400-0x247f has been reserved
[   30.988409] pnp: 00:05: ioport range 0x2480-0x24ff has been reserved
[   30.991788] pnp: 00:05: ioport range 0x2800-0x287f has been reserved
[   30.991827] pnp: 00:05: ioport range 0x2880-0x28ff has been reserved
[   30.991867] pnp: 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   30.991906] pnp: 00:05: ioport range 0x2c80-0x2cff has been reserved
[   30.991945] pnp: 00:05: iomem range 0x0-0x0 could not be reserved
[   30.991984] pnp: 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[   30.992028] pnp: 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[   30.992075] pnp: 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[   30.992125] pnp: 00:0a: ioport range 0x290-0x29f has been reserved
[   30.992167] pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[   30.992210] pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   30.992249] pnp: 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   30.992288] pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   30.992327] pnp: 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[   30.992367] pnp: 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
[   30.992592] PCI: Bridge: 0000:00:08.0
[   30.992629]   IO window: d000-dfff
[   30.992666]   MEM window: f9f00000-f9ffffff
[   30.992703]   PREFETCH window: f0000000-f00fffff
[   30.992741] PCI: Bridge: 0000:00:0b.0
[   30.992778]   IO window: c000-cfff
[   30.992814]   MEM window: f9e00000-f9efffff
[   30.992851]   PREFETCH window: disabled.
[   30.992888] PCI: Bridge: 0000:00:0c.0
[   30.992924]   IO window: disabled.
[   30.992960]   MEM window: disabled.
[   30.992996]   PREFETCH window: disabled.
[   30.993033] PCI: Bridge: 0000:00:0d.0
[   30.993069]   IO window: e000-efff
[   30.993106]   MEM window: fa000000-febfffff
[   30.993143]   PREFETCH window: d0000000-dfffffff
[   30.993180] PCI: Bridge: 0000:00:0e.0
[   30.993216]   IO window: disabled.
[   30.993253]   MEM window: disabled.
[   30.993289]   PREFETCH window: disabled.
[   30.993331] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   30.993340] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   30.993345] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   30.993350] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   30.993356] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   30.993362] NET: Registered protocol family 2
[   31.028086] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   31.028576] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[   31.029738] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   31.030207] TCP: Hash tables configured (established 131072 bind 65536)
[   31.030246] TCP reno registered
[   31.042427] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[   31.042477] io scheduler noop registered
[   31.042515] io scheduler cfq registered (default)
[   31.043197] Boot video device is 0000:04:00.0
[   31.043310] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   31.043327] assign_interrupt_mode Found MSI capability
[   31.043381] Allocate Port Service[0000:00:0b.0:pcie00]
[   31.043425] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   31.043440] assign_interrupt_mode Found MSI capability
[   31.043489] Allocate Port Service[0000:00:0c.0:pcie00]
[   31.043528] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   31.043544] assign_interrupt_mode Found MSI capability
[   31.043592] Allocate Port Service[0000:00:0d.0:pcie00]
[   31.043632] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   31.043648] assign_interrupt_mode Found MSI capability
[   31.043696] Allocate Port Service[0000:00:0e.0:pcie00]
[   31.043888] input: Power Button (FF) as /class/input/input0
[   31.043926] ACPI: Power Button (FF) [PWRF]
[   31.044017] input: Power Button (CM) as /class/input/input1
[   31.044055] ACPI: Power Button (CM) [PWRB]
[   31.044196] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
[   31.044302] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
[   31.048381] Real Time Clock Driver v1.12ac
[   31.048495] hpet_resources: 0xfed00000 is busy
[   31.048506] Linux agpgart interface v0.102
[   31.048679] ahci 0000:00:0a.0: version 2.3
[   31.048870] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   31.048914] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[   32.052676] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[   32.052728] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[   32.052768] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   32.052974] scsi0 : ahci
[   32.053072] scsi1 : ahci
[   32.053141] scsi2 : ahci
[   32.053208] scsi3 : ahci
[   32.053268] ata1: SATA max UDMA/133 cmd 0xffffc20000020100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   32.053318] ata2: SATA max UDMA/133 cmd 0xffffc20000020180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   32.053368] ata3: SATA max UDMA/133 cmd 0xffffc20000020200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   32.053418] ata4: SATA max UDMA/133 cmd 0xffffc20000020280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   32.528024] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   62.463855] ata1.00: qc timeout (cmd 0xec)
[   62.463893] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   63.438325] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   63.439125] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   63.439165] ata1.00: 312581808 sectors, multi 16: LBA48 
[   63.439793] ata1.00: configured for UDMA/133
[   63.439831] ata1: EH pending after completion, repeating EH (cnt=4)
[   63.913919] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   63.934676] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   63.934715] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   63.936701] ata2.00: configured for UDMA/133
[   64.249827] ata3: SATA link down (SStatus 0 SControl 300)
[   64.562456] ata4: SATA link down (SStatus 0 SControl 300)
[   64.562784] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
[   64.562887] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   64.562931] sd 0:0:0:0: [sda] Write Protect is off
[   64.562970] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   64.562979] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   64.563050] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   64.563093] sd 0:0:0:0: [sda] Write Protect is off
[   64.563131] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   64.563138] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   64.563187]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   64.592670] sd 0:0:0:0: [sda] Attached SCSI disk
[   64.592782] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[   64.592875] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   64.592920] sd 1:0:0:0: [sdb] Write Protect is off
[   64.592957] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   64.592965] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   64.593029] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   64.593072] sd 1:0:0:0: [sdb] Write Protect is off
[   64.593109] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   64.593117] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   64.593166]  sdb: sdb1 sdb2
[   64.652294] sd 1:0:0:0: [sdb] Attached SCSI disk
[   64.652423] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   64.655085] serio: i8042 KBD port at 0x60,0x64 irq 1
[   64.655125] serio: i8042 AUX port at 0x60,0x64 irq 12
[   64.655291] usbcore: registered new interface driver usbhid
[   64.655329] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   64.655374] TCP cubic registered
[   64.655411] NET: Registered protocol family 1
[   64.655461] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.00.00)
[   64.655306] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   64.655345] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   64.655384] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   64.655421] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   64.655459] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   64.655497] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   64.655535] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   64.655574] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   64.681657] input: AT Translated Set 2 keyboard as /class/input/input2
[   64.780188] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[   64.780231] ReiserFS: sda3: using ordered data mode
[   64.789761] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   64.790673] ReiserFS: sda3: checking transaction log (sda3)
[   64.825756] ReiserFS: sda3: Using r5 hash to sort names
[   64.825806] VFS: Mounted root (reiserfs filesystem) readonly.
[   64.825855] Freeing unused kernel memory: 172k freed
[   69.427873] ReiserFS: sda3: switching to journaled data mode
[   70.187872] r8169 Gigabit Ethernet driver 2.2LK loaded
[   70.188142] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   70.188150] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[   70.188164] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   70.188344] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 19
[   70.191321] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   70.191331] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[   70.191560] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   70.191565] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   70.191600] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   70.191627] ehci_hcd 0000:00:02.1: debug port 1
[   70.191630] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   70.191639] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   70.203321] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   70.203413] usb usb1: configuration #1 chosen from 1 choice
[   70.203430] hub 1-0:1.0: USB hub found
[   70.203436] hub 1-0:1.0: 10 ports detected
[   70.532346] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   70.656924] usb 1-3: configuration #1 chosen from 1 choice
[   70.657125] hub 1-3:1.0: USB hub found
[   70.659802] hub 1-3:1.0: 4 ports detected
[   70.689828] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[   70.958571] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[   71.054162] usb 1-3.1: configuration #1 chosen from 1 choice
[   71.065216] input: Logitech USB Receiver as /class/input/input3
[   71.065229] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   71.071526] input: Logitech USB Receiver as /class/input/input4
[   71.071543] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   72.249652] mice: PS/2 mouse device common for all mice
[   73.353925] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   73.353935] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[   73.356700] Audigy2 value: Special config.
[   75.274992] w83627ehf: Found W83627EHG chip at 0x290
[   76.594832] r8169: eth0: link up
[   77.004133] NET: Registered protocol family 17

[-- Attachment #3: dmesg_2.6.23.17_coldboot --]
[-- Type: text/plain, Size: 23490 bytes --]

[    0.000000] Linux version 2.6.23.17reiser4_ahci_debug (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Sun Mar 16 08:58:43 CET 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 753 pages reserved
[    0.000000]   DMA zone: 3190 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 29416 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order.  Total pages: 1030622
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[   31.402615] time.c: Detected 3013.892 MHz processor.
[   31.406434] Console: colour VGA+ 80x25
[   31.406437] console [tty6] enabled
[   31.411020] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   31.413367] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   31.414137] Checking aperture...
[   31.414175] CPU 0: aperture @ ecc8000000 size 32 MB
[   31.414213] Aperture too small (32 MB)
[   31.420024] No AGP bridge found
[   31.420060] Your BIOS doesn't leave a aperture memory hole
[   31.420098] Please enable the IOMMU option in the BIOS setup
[   31.420136] This costs you 64 MB of RAM
[   31.445349] Mapping aperture over 65536 KB of RAM @ 8000000
[   31.468560] Memory: 4050348k/4980736k available (1884k kernel code, 143028k reserved, 594k data, 172k init)
[   31.468631] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   31.549110] Calibrating delay using timer specific routine.. 6034.64 BogoMIPS (lpj=10053826)
[   31.549201] Mount-cache hash table entries: 256
[   31.549307] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   31.549347] CPU: L2 Cache: 1024K (64 bytes/line)
[   31.549385] CPU: Physical Processor ID: 0
[   31.549422] CPU: Processor Core ID: 0
[   31.549475] SMP alternatives: switching to UP code
[   31.549789] ACPI: Core revision 20070126
[   31.584959] Using local APIC timer interrupts.
[   31.618102] result 12557890
[   31.618137] Detected 12.557 MHz APIC timer.
[   31.618990] SMP alternatives: switching to SMP code
[   31.619195] Booting processor 1/2 APIC 0x1
[   31.629517] Initializing CPU#1
[   31.712306] Calibrating delay using timer specific routine.. 6030.02 BogoMIPS (lpj=10046445)
[   31.712310] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   31.712311] CPU: L2 Cache: 1024K (64 bytes/line)
[   31.712313] CPU: Physical Processor ID: 0
[   31.712314] CPU: Processor Core ID: 1
[   31.712394] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   31.715403] Brought up 2 CPUs
[   31.715881] NET: Registered protocol family 16
[   31.715991] ACPI: bus type pci registered
[   31.716073] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   31.716111] PCI: Not using MMCONFIG.
[   31.716148] PCI: Using configuration type 1
[   31.718415] ACPI: EC: Look up EC in DSDT
[   31.721791] ACPI: Interpreter enabled
[   31.721829] ACPI: (supports S0 S1 S3 S4 S5)
[   31.721998] ACPI: Using IOAPIC for interrupt routing
[   31.722283] Error attaching device data
[   31.722322] Error attaching device data
[   31.722361] Error attaching device data
[   31.722400] Error attaching device data
[   31.727700] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   31.728178] PCI: Transparent bridge - 0000:00:08.0
[   31.728490] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   31.728624] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   31.728745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   31.728803] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   31.728861] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   31.728918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   31.732915] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   31.733257] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   31.733594] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[   31.733956] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[   31.734318] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[   31.734681] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   31.735017] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[   31.735380] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   31.735717] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   31.736053] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[   31.736416] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   31.736752] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[   31.737114] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[   31.737476] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   31.737812] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[   31.738175] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   31.738511] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[   31.738914] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[   31.739276] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[   31.739639] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[   31.739995] Linux Plug and Play Support v0.97 (c) Adam Belay
[   31.740047] pnp: PnP ACPI init
[   31.740086] ACPI: bus type pnp registered
[   31.742695] pnp: PnP ACPI: found 13 devices
[   31.742732] ACPI: ACPI bus type pnp unregistered
[   31.742848] SCSI subsystem initialized
[   31.742906] libata version 2.21 loaded.
[   31.742954] usbcore: registered new interface driver usbfs
[   31.743007] usbcore: registered new interface driver hub
[   31.743065] usbcore: registered new device driver usb
[   31.743147] PCI: Using ACPI for IRQ routing
[   31.743185] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   31.758673] PCI-DMA: Disabling AGP.
[   31.759406] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   31.759448] PCI-DMA: using GART IOMMU.
[   31.759486] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   31.759645] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   31.759783] hpet0: 3 32-bit timers, 25000000 Hz
[   31.762200] Time: hpet clocksource has been installed.
[   31.768662] pnp: 00:05: iomem range 0x0-0x0 could not be reserved
[   31.768702] pnp: 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[   31.768745] pnp: 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[   31.768792] pnp: 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[   31.772200] pnp: 00:0a: ioport range 0x290-0x29f has been reserved
[   31.772241] pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[   31.772284] pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   31.772323] pnp: 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   31.772362] pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   31.772401] pnp: 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[   31.772618] PCI: Bridge: 0000:00:08.0
[   31.772655]   IO window: d000-dfff
[   31.772692]   MEM window: f9f00000-f9ffffff
[   31.772729]   PREFETCH window: f0000000-f00fffff
[   31.772768] PCI: Bridge: 0000:00:0b.0
[   31.772804]   IO window: c000-cfff
[   31.772841]   MEM window: f9e00000-f9efffff
[   31.772877]   PREFETCH window: disabled.
[   31.772914] PCI: Bridge: 0000:00:0c.0
[   31.772950]   IO window: disabled.
[   31.772986]   MEM window: disabled.
[   31.773022]   PREFETCH window: disabled.
[   31.773060] PCI: Bridge: 0000:00:0d.0
[   31.773096]   IO window: e000-efff
[   31.773132]   MEM window: fa000000-febfffff
[   31.773169]   PREFETCH window: d0000000-dfffffff
[   31.773207] PCI: Bridge: 0000:00:0e.0
[   31.773243]   IO window: disabled.
[   31.773279]   MEM window: disabled.
[   31.773316]   PREFETCH window: disabled.
[   31.773358] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   31.773367] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   31.773372] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   31.773377] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   31.773382] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   31.773387] NET: Registered protocol family 2
[   31.808535] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   31.809025] TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
[   31.810182] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   31.810645] TCP: Hash tables configured (established 131072 bind 65536)
[   31.810685] TCP reno registered
[   31.822871] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[   31.822919] io scheduler noop registered
[   31.822957] io scheduler cfq registered (default)
[   31.823635] Boot video device is 0000:04:00.0
[   31.823749] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   31.823767] assign_interrupt_mode Found MSI capability
[   31.823820] Allocate Port Service[0000:00:0b.0:pcie00]
[   31.823864] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   31.823880] assign_interrupt_mode Found MSI capability
[   31.823929] Allocate Port Service[0000:00:0c.0:pcie00]
[   31.823968] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   31.823984] assign_interrupt_mode Found MSI capability
[   31.824031] Allocate Port Service[0000:00:0d.0:pcie00]
[   31.824070] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   31.824086] assign_interrupt_mode Found MSI capability
[   31.824134] Allocate Port Service[0000:00:0e.0:pcie00]
[   31.824331] input: Power Button (FF) as /class/input/input0
[   31.824370] ACPI: Power Button (FF) [PWRF]
[   31.824467] input: Power Button (CM) as /class/input/input1
[   31.824505] ACPI: Power Button (CM) [PWRB]
[   31.824645] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
[   31.824750] ACPI Exception (processor_core-0818): AE_NOT_FOUND, Processor Device is not present [20070126]
[   31.855387] Real Time Clock Driver v1.12ac
[   31.855497] hpet_resources: 0xfed00000 is busy
[   31.855510] Linux agpgart interface v0.102
[   31.855681] ahci 0000:00:0a.0: version 2.3
[   31.855857] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   31.855900] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[   32.859729] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[   32.859782] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[   32.859822] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   32.860029] scsi0 : ahci
[   32.860130] scsi1 : ahci
[   32.860198] scsi2 : ahci
[   32.860266] scsi3 : ahci
[   32.860326] ata1: SATA max UDMA/133 cmd 0xffffc20000020100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   32.860377] ata2: SATA max UDMA/133 cmd 0xffffc20000020180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   32.860427] ata3: SATA max UDMA/133 cmd 0xffffc20000020200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   32.860477] ata4: SATA max UDMA/133 cmd 0xffffc20000020280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 315
[   33.335080] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   63.270911] ata1.00: qc timeout (cmd 0xec)
[   63.270949] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   64.245381] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   64.246192] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   64.246232] ata1.00: 312581808 sectors, multi 16: LBA48 
[   64.246848] ata1.00: configured for UDMA/133
[   64.246885] ata1: EH pending after completion, repeating EH (cnt=4)
[   64.720974] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   64.741732] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   64.741772] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   64.743751] ata2.00: configured for UDMA/133
[   65.056884] ata3: SATA link down (SStatus 0 SControl 300)
[   65.369512] ata4: SATA link down (SStatus 0 SControl 300)
[   65.369839] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
[   65.369941] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   65.369985] sd 0:0:0:0: [sda] Write Protect is off
[   65.370024] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   65.370033] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   65.370104] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   65.370147] sd 0:0:0:0: [sda] Write Protect is off
[   65.370184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   65.370192] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   65.370241]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   65.398814] sd 0:0:0:0: [sda] Attached SCSI disk
[   65.398929] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[   65.399023] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   65.399066] sd 1:0:0:0: [sdb] Write Protect is off
[   65.399104] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   65.399111] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   65.399174] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   65.399217] sd 1:0:0:0: [sdb] Write Protect is off
[   65.399255] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   65.399263] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   65.399311]  sdb: sdb1 sdb2
[   65.404062] sd 1:0:0:0: [sdb] Attached SCSI disk
[   65.404202] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   65.406763] serio: i8042 KBD port at 0x60,0x64 irq 1
[   65.406802] serio: i8042 AUX port at 0x60,0x64 irq 12
[   65.439680] usbcore: registered new interface driver usbhid
[   65.439719] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   65.439763] TCP cubic registered
[   65.439800] NET: Registered protocol family 1
[   65.439850] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.00.00)
[   65.439700] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   65.439739] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   65.439777] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   65.439815] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   65.439853] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   65.439891] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   65.439929] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   65.439967] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   65.465337] input: AT Translated Set 2 keyboard as /class/input/input2
[   65.569737] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[   65.569782] ReiserFS: sda3: using ordered data mode
[   65.579310] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   65.580258] ReiserFS: sda3: checking transaction log (sda3)
[   65.615306] ReiserFS: sda3: Using r5 hash to sort names
[   65.615357] VFS: Mounted root (reiserfs filesystem) readonly.
[   65.615408] Freeing unused kernel memory: 172k freed
[   70.172353] ReiserFS: sda3: switching to journaled data mode
[   71.668052] r8169 Gigabit Ethernet driver 2.2LK loaded
[   71.668284] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   71.668292] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[   71.668305] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   71.668482] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 19
[   71.671464] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   71.671474] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[   71.671706] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   71.671711] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   71.671742] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   71.671771] ehci_hcd 0000:00:02.1: debug port 1
[   71.671774] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   71.671783] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   71.682195] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   71.685421] usb usb1: configuration #1 chosen from 1 choice
[   71.685495] hub 1-0:1.0: USB hub found
[   71.685502] hub 1-0:1.0: 10 ports detected
[   72.017873] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   72.142424] usb 1-3: configuration #1 chosen from 1 choice
[   72.143974] hub 1-3:1.0: USB hub found
[   72.144262] hub 1-3:1.0: 4 ports detected
[   72.160810] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[   72.443882] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[   72.539843] usb 1-3.1: configuration #1 chosen from 1 choice
[   72.551132] input: Logitech USB Receiver as /class/input/input3
[   72.716389] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   72.722292] input: Logitech USB Receiver as /class/input/input4
[   72.926078] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   73.960227] mice: PS/2 mouse device common for all mice
[   75.108931] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   75.108941] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[   75.111700] Audigy2 value: Special config.
[   77.011602] w83627ehf: Found W83627EHG chip at 0x290
[   78.457978] r8169: eth0: link up
[   78.457986] r8169: eth0: link up
[   79.251462] NET: Registered protocol family 17

[-- Attachment #4: dmesg_2.6.25_rc5_coldboot --]
[-- Type: text/plain, Size: 26530 bytes --]

[    0.000000] Linux version 2.6.25-rc5reiser4_ahci_debug (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Sun Mar 16 08:44:10 CET 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] early res: 0 [0-fff] BIOS data page
[    0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[    0.000000] early res: 2 [200000-50c113] TEXT DATA BSS
[    0.000000] early res: 3 [9fc00-a0bff] EBDA
[    0.000000] early res: 4 [8000-dfff] PGTABLE
[    0.000000] No mptable found.
[    0.000000]  [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[    0.000000]  [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[    0.000000]  [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[    0.000000]  [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[    0.000000]  [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[    0.000000]  [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[    0.000000]  [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[    0.000000]  [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[    0.000000]  [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[    0.000000]  [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[    0.000000]  [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[    0.000000]  [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[    0.000000]  [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[    0.000000]  [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[    0.000000]  [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[    0.000000]  [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[    0.000000]  [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[    0.000000]  [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[    0.000000]  [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[    0.000000]  [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[    0.000000]  [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
[    0.000000]  [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
[    0.000000]  [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
[    0.000000]  [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
[    0.000000]  [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
[    0.000000]  [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0
[    0.000000]  [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0
[    0.000000]  [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0
[    0.000000]  [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0
[    0.000000]  [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0
[    0.000000]  [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0
[    0.000000]  [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0
[    0.000000]  [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0
[    0.000000]  [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 790 pages reserved
[    0.000000]   DMA zone: 3153 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffc0000
[    0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cfff0000
[    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff380000
[    0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 32576 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030585
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.000002] time.c: Detected 3013.889 MHz processor.
[    0.000011] spurious 8259A interrupt: IRQ7.
[    0.003333] Console: colour VGA+ 80x25
[    0.003333] console [tty6] enabled
[    0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003333] Checking aperture...
[    0.003333] Node 0: aperture @ ecc8000000 size 32 MB
[    0.003333] Aperture beyond 4GB. Ignoring.
[    0.003333] No AGP bridge found
[    0.003333] Your BIOS doesn't leave a aperture memory hole
[    0.003333] Please enable the IOMMU option in the BIOS setup
[    0.003333] This costs you 64 MB of RAM
[    0.003333] Mapping aperture over 65536 KB of RAM @ c000000
[    0.003333] Memory: 4048020k/4980736k available (1962k kernel code, 144868k reserved, 639k data, 192k init)
[    0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[    0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[    0.003333] hpet clockevent registered
[    0.083330] Calibrating delay using timer specific routine.. 6034.73 BogoMIPS (lpj=10053972)
[    0.083419] Mount-cache hash table entries: 256
[    0.083537] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.083577] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.083615] CPU: Physical Processor ID: 0
[    0.083651] CPU: Processor Core ID: 0
[    0.083701] ACPI: Core revision 20070126
[    0.122329] Using local APIC timer interrupts.
[    0.123326] APIC timer calibration result 12557874
[    0.123327] Detected 12.557 MHz APIC timer.
[    0.123429] Booting processor 1/2 APIC 0x1
[    0.003333] Initializing CPU#1
[    0.003333] Calibrating delay using timer specific routine.. 6030.95 BogoMIPS (lpj=10046322)
[    0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.003333] CPU: Physical Processor ID: 0
[    0.003333] CPU: Processor Core ID: 1
[    0.003333] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[    0.216844] Brought up 2 CPUs
[    0.217290] net_namespace: 304 bytes
[    0.217406] NET: Registered protocol family 16
[    0.217492] ACPI: bus type pci registered
[    0.217568] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[    0.217607] PCI: Not using MMCONFIG.
[    0.217644] PCI: Using configuration type 1
[    0.220669] ACPI: EC: Look up EC in DSDT
[    0.225009] ACPI: Interpreter enabled
[    0.225046] ACPI: (supports S0 S1 S3 S4 S5)
[    0.225217] ACPI: Using IOAPIC for interrupt routing
[    0.225395] ACPI: Error attaching device data
[    0.225435] ACPI: Error attaching device data
[    0.225474] ACPI: Error attaching device data
[    0.225514] ACPI: Error attaching device data
[    0.231309] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.231834] PCI: Transparent bridge - 0000:00:08.0
[    0.232089] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.232232] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.232339] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.232404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.232469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[    0.232533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.237379] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[    0.237745] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[    0.238110] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.238501] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.238891] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.239282] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[    0.239646] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.240118] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.240482] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.240846] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[    0.241237] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[    0.241601] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[    0.241992] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[    0.242382] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.242747] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.243140] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[    0.243500] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[    0.243917] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.244308] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[    0.244699] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[    0.245029] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.245077] pnp: PnP ACPI init
[    0.245116] ACPI: bus type pnp registered
[    0.248367] pnp: PnP ACPI: found 13 devices
[    0.248405] ACPI: ACPI bus type pnp unregistered
[    0.248541] SCSI subsystem initialized
[    0.248607] libata version 3.00 loaded.
[    0.248669] usbcore: registered new interface driver usbfs
[    0.248727] usbcore: registered new interface driver hub
[    0.248790] usbcore: registered new device driver usb
[    0.248899] PCI: Using ACPI for IRQ routing
[    0.248937] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.266666] PCI-DMA: Disabling AGP.
[    0.266666] PCI-DMA: aperture base @ c000000 size 65536 KB
[    0.266666] PCI-DMA: using GART IOMMU.
[    0.266666] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.266666] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.266666] hpet0: 3 32-bit timers, 25000000 Hz
[    0.266666] Time: hpet clocksource has been installed.
[    0.266675] Switched to high resolution mode on CPU 0
[    0.056681] Switched to high resolution mode on CPU 1
[    0.276738] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[    0.276738] system 00:05: ioport range 0x800-0x80f has been reserved
[    0.276738] system 00:05: ioport range 0x2000-0x207f has been reserved
[    0.276738] system 00:05: ioport range 0x2080-0x20ff has been reserved
[    0.276738] system 00:05: ioport range 0x2400-0x247f has been reserved
[    0.276738] system 00:05: ioport range 0x2480-0x24ff has been reserved
[    0.276738] system 00:05: ioport range 0x2800-0x287f has been reserved
[    0.276738] system 00:05: ioport range 0x2880-0x28ff has been reserved
[    0.276738] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[    0.276738] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[    0.276738] system 00:05: iomem range 0x0-0x0 could not be reserved
[    0.276738] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.276744] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.276792] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.276843] system 00:0a: ioport range 0x290-0x29f has been reserved
[    0.276886] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.276929] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.276968] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[    0.277008] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.277053] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[    0.277101] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
[    0.277547] PCI: Bridge: 0000:00:08.0
[    0.277584]   IO window: d000-dfff
[    0.277622]   MEM window: 0xf9f00000-0xf9ffffff
[    0.277660]   PREFETCH window: disabled.
[    0.277698] PCI: Bridge: 0000:00:0b.0
[    0.277735]   IO window: c000-cfff
[    0.277772]   MEM window: 0xf9e00000-0xf9efffff
[    0.277809]   PREFETCH window: disabled.
[    0.277847] PCI: Bridge: 0000:00:0c.0
[    0.277883]   IO window: disabled.
[    0.277920]   MEM window: disabled.
[    0.277956]   PREFETCH window: disabled.
[    0.277994] PCI: Bridge: 0000:00:0d.0
[    0.278030]   IO window: e000-efff
[    0.278067]   MEM window: 0xfa000000-0xfebfffff
[    0.278105]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[    0.278145] PCI: Bridge: 0000:00:0e.0
[    0.278181]   IO window: disabled.
[    0.278218]   MEM window: disabled.
[    0.278254]   PREFETCH window: disabled.
[    0.278298] PCI: Setting latency timer of device 0000:00:08.0 to 64
[    0.278307] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.278312] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.278317] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.278322] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.278329] NET: Registered protocol family 2
[    0.313402] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.313402] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.313402] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.313402] TCP: Hash tables configured (established 262144 bind 65536)
[    0.313402] TCP reno registered
[    0.323700] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.323700] io scheduler noop registered
[    0.323700] io scheduler cfq registered (default)
[    0.323700] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.323700] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.323700] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.323700] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    0.323700] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    0.323700] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    0.323700] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.323700] pci 0000:04:00.0: Boot video device
[    0.323708] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.323708] assign_interrupt_mode Found MSI capability
[    0.323708] Allocate Port Service[0000:00:0b.0:pcie00]
[    0.323715] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.323715] assign_interrupt_mode Found MSI capability
[    0.323715] Allocate Port Service[0000:00:0c.0:pcie00]
[    0.323722] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.323722] assign_interrupt_mode Found MSI capability
[    0.323722] Allocate Port Service[0000:00:0d.0:pcie00]
[    0.323728] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.323728] assign_interrupt_mode Found MSI capability
[    0.323728] Allocate Port Service[0000:00:0e.0:pcie00]
[    0.323768] input: Power Button (FF) as /class/input/input0
[    0.323768] ACPI: Power Button (FF) [PWRF]
[    0.323775] input: Power Button (CM) as /class/input/input1
[    0.323775] ACPI: Power Button (CM) [PWRB]
[    0.323807] ACPI: ACPI0007:00 is registered as cooling_device0
[    0.323814] ACPI: ACPI0007:01 is registered as cooling_device1
[    0.357188] Real Time Clock Driver v1.12ac
[    0.357193] hpet_resources: 0xfed00000 is busy
[    0.357198] Linux agpgart interface v0.103
[    0.357218] Driver 'sd' needs updating - please use bus_type methods
[    0.357224] ahci 0000:00:0a.0: version 3.0
[    0.357224] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.357224] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[    1.360551] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    1.360551] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[    1.360551] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.360553] scsi0 : ahci
[    1.360567] scsi1 : ahci
[    1.360578] scsi2 : ahci
[    1.360591] scsi3 : ahci
[    1.360597] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315
[    1.360597] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315
[    1.360597] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315
[    1.360597] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315
[    1.794389] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   31.794187] ata1.00: qc timeout (cmd 0xec)
[   31.794187] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   31.794187] ata1: failed to recover some devices, retrying in 5 secs
[   37.431961] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   37.432460] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   37.432460] ata1.00: 312581808 sectors, multi 16: LBA48 
[   37.432990] ata1.00: configured for UDMA/133
[   38.064932] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   38.085423] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   38.085423] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   38.087332] ata2.00: configured for UDMA/133
[   38.404590] ata3: SATA link down (SStatus 0 SControl 300)
[   38.724459] ata4: SATA link down (SStatus 0 SControl 300)
[   38.923769] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
[   38.923781] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   38.923781] sd 0:0:0:0: [sda] Write Protect is off
[   38.923782] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   38.923782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   38.923782] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   38.923782] sd 0:0:0:0: [sda] Write Protect is off
[   38.923782] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   38.923782] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   38.923782]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   38.756509] sd 0:0:0:0: [sda] Attached SCSI disk
[   38.756520] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[   38.756526] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   38.756526] sd 1:0:0:0: [sdb] Write Protect is off
[   38.756526] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   38.756526] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   38.756526] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   38.756526] sd 1:0:0:0: [sdb] Write Protect is off
[   38.756526] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   38.756526] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   38.756526]  sdb: sdb1 sdb2
[   38.764139] sd 1:0:0:0: [sdb] Attached SCSI disk
[   38.764155] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   38.764991] serio: i8042 KBD port at 0x60,0x64 irq 1
[   38.765032] serio: i8042 AUX port at 0x60,0x64 irq 12
[   38.800936] usbcore: registered new interface driver usbhid
[   38.800936] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   38.800936] TCP cubic registered
[   38.800936] NET: Registered protocol family 1
[   38.800941] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   39.001176] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   39.001176] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   39.001176] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   39.001176] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   39.001176] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   39.001176] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   39.001176] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   39.001176] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   38.827869] input: AT Translated Set 2 keyboard as /class/input/input2
[   38.927469] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[   38.927469] ReiserFS: sda3: using ordered data mode
[   38.938639] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   38.938639] ReiserFS: sda3: checking transaction log (sda3)
[   38.985103] ReiserFS: sda3: Using r5 hash to sort names
[   38.985103] VFS: Mounted root (reiserfs filesystem) readonly.
[   38.985103] Freeing unused kernel memory: 192k freed
[   39.528203] Clocksource tsc unstable (delta = -222095591 ns)
[   44.417159] ReiserFS: sda3: switching to journaled data mode
[   44.863238] r8169 Gigabit Ethernet driver 2.2LK loaded
[   44.863478] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   44.863484] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[   44.863492] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   44.863863] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 314
[   45.340950] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[   51.203233] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   51.203239] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[   51.206554] Audigy2 value: Special config.
[   54.752474] w83627ehf: Found W83627EHG chip at 0x290
[   56.228630] r8169: eth0: link up
[   56.228630] r8169: eth0: link up
[   57.373494] NET: Registered protocol family 17

[-- Attachment #5: dmesg_2.6.25_rc5_reboot --]
[-- Type: text/plain, Size: 26415 bytes --]

[    0.000000] Linux version 2.6.25-rc5reiser4_ahci_debug (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Sun Mar 16 08:44:10 CET 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] early res: 0 [0-fff] BIOS data page
[    0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[    0.000000] early res: 2 [200000-50c113] TEXT DATA BSS
[    0.000000] early res: 3 [9fc00-a0bff] EBDA
[    0.000000] early res: 4 [8000-dfff] PGTABLE
[    0.000000] No mptable found.
[    0.000000]  [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[    0.000000]  [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[    0.000000]  [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[    0.000000]  [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[    0.000000]  [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[    0.000000]  [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[    0.000000]  [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[    0.000000]  [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[    0.000000]  [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[    0.000000]  [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[    0.000000]  [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[    0.000000]  [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[    0.000000]  [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[    0.000000]  [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[    0.000000]  [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[    0.000000]  [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[    0.000000]  [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[    0.000000]  [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[    0.000000]  [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[    0.000000]  [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[    0.000000]  [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
[    0.000000]  [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
[    0.000000]  [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
[    0.000000]  [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
[    0.000000]  [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
[    0.000000]  [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0
[    0.000000]  [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0
[    0.000000]  [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0
[    0.000000]  [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0
[    0.000000]  [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0
[    0.000000]  [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0
[    0.000000]  [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0
[    0.000000]  [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0
[    0.000000]  [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 790 pages reserved
[    0.000000]   DMA zone: 3153 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffc0000
[    0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cfff0000
[    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff380000
[    0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 32576 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030585
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.000002] time.c: Detected 3013.876 MHz processor.
[    0.000011] spurious 8259A interrupt: IRQ7.
[    0.003333] Console: colour VGA+ 80x25
[    0.003333] console [tty6] enabled
[    0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003333] Checking aperture...
[    0.003333] Node 0: aperture @ c000000 size 32 MB
[    0.003333] Aperture pointing to e820 RAM. Ignoring.
[    0.003333] No AGP bridge found
[    0.003333] Your BIOS doesn't leave a aperture memory hole
[    0.003333] Please enable the IOMMU option in the BIOS setup
[    0.003333] This costs you 64 MB of RAM
[    0.003333] Mapping aperture over 65536 KB of RAM @ c000000
[    0.003333] Memory: 4048020k/4980736k available (1962k kernel code, 144868k reserved, 639k data, 192k init)
[    0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[    0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[    0.003333] hpet clockevent registered
[    0.083330] Calibrating delay using timer specific routine.. 6034.72 BogoMIPS (lpj=10053965)
[    0.083419] Mount-cache hash table entries: 256
[    0.083537] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.083577] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.083615] CPU: Physical Processor ID: 0
[    0.083652] CPU: Processor Core ID: 0
[    0.083701] ACPI: Core revision 20070126
[    0.122329] Using local APIC timer interrupts.
[    0.123326] APIC timer calibration result 12557820
[    0.123327] Detected 12.557 MHz APIC timer.
[    0.123430] Booting processor 1/2 APIC 0x1
[    0.003333] Initializing CPU#1
[    0.003333] Calibrating delay using timer specific routine.. 6030.95 BogoMIPS (lpj=10046334)
[    0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.003333] CPU: Physical Processor ID: 0
[    0.003333] CPU: Processor Core ID: 1
[    0.003333] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[    0.216844] Brought up 2 CPUs
[    0.217291] net_namespace: 304 bytes
[    0.217406] NET: Registered protocol family 16
[    0.217493] ACPI: bus type pci registered
[    0.217569] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[    0.217608] PCI: Not using MMCONFIG.
[    0.217644] PCI: Using configuration type 1
[    0.220668] ACPI: EC: Look up EC in DSDT
[    0.225011] ACPI: Interpreter enabled
[    0.225049] ACPI: (supports S0 S1 S3 S4 S5)
[    0.225220] ACPI: Using IOAPIC for interrupt routing
[    0.225396] ACPI: Error attaching device data
[    0.225436] ACPI: Error attaching device data
[    0.225476] ACPI: Error attaching device data
[    0.225516] ACPI: Error attaching device data
[    0.231311] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.231837] PCI: Transparent bridge - 0000:00:08.0
[    0.232092] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.232235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.232343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.232408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.232472] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[    0.232536] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.237274] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[    0.237640] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[    0.238005] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.238396] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.238786] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.239177] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[    0.239541] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.240053] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.240418] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.240781] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[    0.241171] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[    0.241535] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[    0.241926] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[    0.242316] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.242681] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.243073] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[    0.243446] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[    0.243863] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.244254] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[    0.244645] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[    0.244973] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.245021] pnp: PnP ACPI init
[    0.245060] ACPI: bus type pnp registered
[    0.248237] pnp: PnP ACPI: found 13 devices
[    0.248274] ACPI: ACPI bus type pnp unregistered
[    0.248378] SCSI subsystem initialized
[    0.248447] libata version 3.00 loaded.
[    0.248485] usbcore: registered new interface driver usbfs
[    0.248535] usbcore: registered new interface driver hub
[    0.248590] usbcore: registered new device driver usb
[    0.248667] PCI: Using ACPI for IRQ routing
[    0.248705] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.266649] PCI-DMA: Disabling AGP.
[    0.266649] PCI-DMA: aperture base @ c000000 size 65536 KB
[    0.266649] PCI-DMA: using GART IOMMU.
[    0.266649] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.266649] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.266649] hpet0: 3 32-bit timers, 25000000 Hz
[    0.266649] Time: hpet clocksource has been installed.
[    0.266659] Switched to high resolution mode on CPU 0
[    0.060013] Switched to high resolution mode on CPU 1
[    0.280057] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[    0.280057] system 00:05: ioport range 0x800-0x80f has been reserved
[    0.280057] system 00:05: ioport range 0x2000-0x207f has been reserved
[    0.280057] system 00:05: ioport range 0x2080-0x20ff has been reserved
[    0.280057] system 00:05: ioport range 0x2400-0x247f has been reserved
[    0.280057] system 00:05: ioport range 0x2480-0x24ff has been reserved
[    0.280057] system 00:05: ioport range 0x2800-0x287f has been reserved
[    0.280057] system 00:05: ioport range 0x2880-0x28ff has been reserved
[    0.280057] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[    0.280057] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[    0.280057] system 00:05: iomem range 0x0-0x0 could not be reserved
[    0.280057] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.280063] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.280111] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.280162] system 00:0a: ioport range 0x290-0x29f has been reserved
[    0.280205] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.280248] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.280287] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[    0.280327] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.280369] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[    0.280417] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
[    0.280862] PCI: Bridge: 0000:00:08.0
[    0.280899]   IO window: d000-dfff
[    0.280937]   MEM window: 0xf9f00000-0xf9ffffff
[    0.280975]   PREFETCH window: disabled.
[    0.281013] PCI: Bridge: 0000:00:0b.0
[    0.281050]   IO window: c000-cfff
[    0.281087]   MEM window: 0xf9e00000-0xf9efffff
[    0.281124]   PREFETCH window: disabled.
[    0.281162] PCI: Bridge: 0000:00:0c.0
[    0.281198]   IO window: disabled.
[    0.281234]   MEM window: disabled.
[    0.281271]   PREFETCH window: disabled.
[    0.281309] PCI: Bridge: 0000:00:0d.0
[    0.281346]   IO window: e000-efff
[    0.281382]   MEM window: 0xfa000000-0xfebfffff
[    0.281420]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[    0.281460] PCI: Bridge: 0000:00:0e.0
[    0.281496]   IO window: disabled.
[    0.281533]   MEM window: disabled.
[    0.281570]   PREFETCH window: disabled.
[    0.281613] PCI: Setting latency timer of device 0000:00:08.0 to 64
[    0.281622] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.281627] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.281632] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.281637] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.281644] NET: Registered protocol family 2
[    0.316722] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.316722] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.316722] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.316722] TCP: Hash tables configured (established 262144 bind 65536)
[    0.316722] TCP reno registered
[    0.327021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.327021] io scheduler noop registered
[    0.327021] io scheduler cfq registered (default)
[    0.327021] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.327021] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.327021] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.327021] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    0.327021] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    0.327021] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    0.327021] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.327021] pci 0000:04:00.0: Boot video device
[    0.327029] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.327029] assign_interrupt_mode Found MSI capability
[    0.327029] Allocate Port Service[0000:00:0b.0:pcie00]
[    0.327036] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.327036] assign_interrupt_mode Found MSI capability
[    0.327036] Allocate Port Service[0000:00:0c.0:pcie00]
[    0.327042] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.327042] assign_interrupt_mode Found MSI capability
[    0.327042] Allocate Port Service[0000:00:0d.0:pcie00]
[    0.327048] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.327048] assign_interrupt_mode Found MSI capability
[    0.327048] Allocate Port Service[0000:00:0e.0:pcie00]
[    0.327089] input: Power Button (FF) as /class/input/input0
[    0.327089] ACPI: Power Button (FF) [PWRF]
[    0.327096] input: Power Button (CM) as /class/input/input1
[    0.327096] ACPI: Power Button (CM) [PWRB]
[    0.327128] ACPI: ACPI0007:00 is registered as cooling_device0
[    0.327135] ACPI: ACPI0007:01 is registered as cooling_device1
[    0.360510] Real Time Clock Driver v1.12ac
[    0.360514] hpet_resources: 0xfed00000 is busy
[    0.360520] Linux agpgart interface v0.103
[    0.360539] Driver 'sd' needs updating - please use bus_type methods
[    0.360546] ahci 0000:00:0a.0: version 3.0
[    0.360546] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.360546] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[    1.363873] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    1.363873] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[    1.363873] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.363875] scsi0 : ahci
[    1.363888] scsi1 : ahci
[    1.363902] scsi2 : ahci
[    1.363915] scsi3 : ahci
[    1.363921] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315
[    1.363921] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315
[    1.363921] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315
[    1.363921] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315
[    6.813858] ata1: port is slow to respond, please be patient (Status 0xd0)
[   11.186680] ata1: softreset failed (device not ready)
[   11.819883] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   11.820376] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   11.820376] ata1.00: 312581808 sectors, multi 16: LBA48 
[   11.820958] ata1.00: configured for UDMA/133
[   12.452853] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   12.473346] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   12.473346] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   12.475248] ata2.00: configured for UDMA/133
[   12.792506] ata3: SATA link down (SStatus 0 SControl 300)
[   13.112373] ata4: SATA link down (SStatus 0 SControl 300)
[   13.310536] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
[   13.310548] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   13.310548] sd 0:0:0:0: [sda] Write Protect is off
[   13.310548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.310548] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.310548] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   13.310548] sd 0:0:0:0: [sda] Write Protect is off
[   13.310548] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   13.310548] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.310548]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   13.147225] sd 0:0:0:0: [sda] Attached SCSI disk
[   13.147386] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[   13.147518] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   13.147565] sd 1:0:0:0: [sdb] Write Protect is off
[   13.147603] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   13.147617] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.147694] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   13.147740] sd 1:0:0:0: [sdb] Write Protect is off
[   13.147778] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   13.147792] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   13.147841]  sdb: sdb1 sdb2
[   13.212325] sd 1:0:0:0: [sdb] Attached SCSI disk
[   13.212340] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   13.213940] serio: i8042 KBD port at 0x60,0x64 irq 1
[   13.213981] serio: i8042 AUX port at 0x60,0x64 irq 12
[   13.242367] usbcore: registered new interface driver usbhid
[   13.242367] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   13.242367] TCP cubic registered
[   13.242367] NET: Registered protocol family 1
[   13.242372] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   13.436867] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   13.436867] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   13.436867] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   13.436867] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   13.436867] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   13.436867] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   13.436867] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   13.436867] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   13.275118] input: AT Translated Set 2 keyboard as /class/input/input2
[   13.374485] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[   13.374485] ReiserFS: sda3: using ordered data mode
[   13.386998] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   13.387124] ReiserFS: sda3: checking transaction log (sda3)
[   13.433787] ReiserFS: sda3: Using r5 hash to sort names
[   13.433787] VFS: Mounted root (reiserfs filesystem) readonly.
[   13.433787] Freeing unused kernel memory: 192k freed
[   14.952162] Clocksource tsc unstable (delta = -320178577 ns)
[   18.738775] ReiserFS: sda3: switching to journaled data mode
[   19.243171] r8169 Gigabit Ethernet driver 2.2LK loaded
[   19.243411] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   19.243417] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[   19.243425] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   19.246367] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 314
[   19.729548] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[   23.365197] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   23.365203] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[   23.368324] Audigy2 value: Special config.
[   26.095970] w83627ehf: Found W83627EHG chip at 0x290
[   27.767190] r8169: eth0: link up
[   27.767190] r8169: eth0: link up
[   29.015156] NET: Registered protocol family 17

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-10 13:05 ` Tejun Heo
  2008-03-10 16:57   ` Volker Armin Hemmann
  2008-03-16  8:34   ` Volker Armin Hemmann
@ 2008-03-17  7:16   ` Volker Armin Hemmann
  2008-03-18  7:36     ` Tejun Heo
  2 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-03-17  7:16 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide

[-- Attachment #1: Type: text/plain, Size: 3547 bytes --]

Hi,

I tried some more stuff, replaced the cables, played with bios settings.

No change.

Then I updated to 2.6.24.3 - and no hangs or 'softreset' failures anymore.

[   38.151334] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   38.151386] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[   38.151425] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   38.151626] scsi0 : ahci
[   38.151722] scsi1 : ahci
[   38.151788] scsi2 : ahci
[   38.151853] scsi3 : ahci
[   38.151942] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   38.151990] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   38.152037] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   38.152085] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   38.783287] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   38.783915] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   38.783957] ata1.00: 312581808 sectors, multi 16: LBA48
[   38.784590] ata1.00: configured for UDMA/133
[   39.415249] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   39.435823] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   39.435862] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   39.437862] ata2.00: configured for UDMA/133
[   39.754512] ata3: SATA link down (SStatus 0 SControl 300)
[   40.073818] ata4: SATA link down (SStatus 0 SControl 300)
[   40.073907] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   40.074017] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   40.074061] sd 0:0:0:0: [sda] Write Protect is off
[   40.074099] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   40.074107] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   40.074178] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   40.074220] sd 0:0:0:0: [sda] Write Protect is off
[   40.074258] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   40.074265] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   40.074314]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   40.098590] sd 0:0:0:0: [sda] Attached SCSI disk
[   40.098725] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   40.098835] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   40.098879] sd 1:0:0:0: [sdb] Write Protect is off
[   40.098917] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   40.098926] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   40.098996] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   40.099039] sd 1:0:0:0: [sdb] Write Protect is off
[   40.099076] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   40.099084] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   40.099133]  sdb: sdb1 sdb2
[   40.109668] sd 1:0:0:0: [sdb] Attached SCSI disk

The only change to other kernels was making ehci-hcd modular. 

I checked already, other kernels still have the IDENTITY error on coldboot and 
the softreset failure on reboot even with the changed config.

2.6.24.2 and 2.6.24.3 both have the reiser4 patch added.

So
2.6.24.2 = bad
2.6.24.3 = good
2.6.25-rc5 = bad 

Setting AHCI in bios still results in timeouts and harddisks not found.

Glück Auf,
Volker

[-- Attachment #2: dmesg_2.6.24.3reiser4 --]
[-- Type: text/plain, Size: 24989 bytes --]

[    0.000000] Linux version 2.6.24.3reiser4 (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Sun Mar 16 20:32:58 CET 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 853 pages reserved
[    0.000000]   DMA zone: 3090 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030522
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   27.321929] Marking TSC unstable due to TSCs unsynchronized
[   27.321931] time.c: Detected 3013.888 MHz processor.
[   27.325755] Console: colour VGA+ 80x25
[   27.325757] console [tty6] enabled
[   27.330363] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   27.332590] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   27.333357] Checking aperture...
[   27.333395] CPU 0: aperture @ ecc8000000 size 32 MB
[   27.333433] Aperture too small (32 MB)
[   27.339291] No AGP bridge found
[   27.339327] Your BIOS doesn't leave a aperture memory hole
[   27.339365] Please enable the IOMMU option in the BIOS setup
[   27.339403] This costs you 64 MB of RAM
[   27.364634] Mapping aperture over 65536 KB of RAM @ 8000000
[   27.388765] Memory: 4049948k/4980736k available (2192k kernel code, 143428k reserved, 681k data, 176k init)
[   27.388833] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   27.471580] Calibrating delay using timer specific routine.. 6034.70 BogoMIPS (lpj=10053931)
[   27.471673] Mount-cache hash table entries: 256
[   27.471780] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   27.471819] CPU: L2 Cache: 1024K (64 bytes/line)
[   27.471857] CPU: Physical Processor ID: 0
[   27.471894] CPU: Processor Core ID: 0
[   27.471947] SMP alternatives: switching to UP code
[   27.472310] ACPI: Core revision 20070126
[   27.507485] Using local APIC timer interrupts.
[   27.540630] APIC timer calibration result 12557876
[   27.540631] Detected 12.557 MHz APIC timer.
[   27.540716] SMP alternatives: switching to SMP code
[   27.540945] Booting processor 1/2 APIC 0x1
[   27.551054] Initializing CPU#1
[   27.633818] Calibrating delay using timer specific routine.. 6030.92 BogoMIPS (lpj=10046282)
[   27.633822] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   27.633824] CPU: L2 Cache: 1024K (64 bytes/line)
[   27.633826] CPU: Physical Processor ID: 0
[   27.633827] CPU: Processor Core ID: 1
[   27.633908] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   27.633973] Brought up 2 CPUs
[   27.634431] net_namespace: 120 bytes
[   27.634663] NET: Registered protocol family 16
[   27.634775] ACPI: bus type pci registered
[   27.634857] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   27.634896] PCI: Not using MMCONFIG.
[   27.634932] PCI: Using configuration type 1
[   27.637173] ACPI: EC: Look up EC in DSDT
[   27.640624] ACPI: Interpreter enabled
[   27.640662] ACPI: (supports S0 S1 S3 S4 S5)
[   27.640832] ACPI: Using IOAPIC for interrupt routing
[   27.641040] Error attaching device data
[   27.641080] Error attaching device data
[   27.641118] Error attaching device data
[   27.641157] Error attaching device data
[   27.646070] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   27.646594] PCI: Transparent bridge - 0000:00:08.0
[   27.646888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   27.647020] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   27.647117] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   27.647173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   27.647227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   27.647283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   27.651219] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   27.651555] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   27.651889] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[   27.652249] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[   27.652609] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[   27.652968] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   27.653301] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[   27.653661] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   27.653997] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   27.654331] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[   27.654690] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   27.655024] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[   27.655383] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[   27.655744] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   27.656077] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[   27.656437] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   27.656772] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[   27.657169] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[   27.657528] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[   27.657889] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[   27.658207] Linux Plug and Play Support v0.97 (c) Adam Belay
[   27.658260] pnp: PnP ACPI init
[   27.658299] ACPI: bus type pnp registered
[   27.660838] pnp: PnP ACPI: found 13 devices
[   27.660875] ACPI: ACPI bus type pnp unregistered
[   27.660998] SCSI subsystem initialized
[   27.661055] libata version 3.00 loaded.
[   27.661105] usbcore: registered new interface driver usbfs
[   27.661161] usbcore: registered new interface driver hub
[   27.661218] usbcore: registered new device driver usb
[   27.661301] PCI: Using ACPI for IRQ routing
[   27.661339] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   27.670423] PCI-DMA: Disabling AGP.
[   27.671160] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   27.671202] PCI-DMA: using GART IOMMU.
[   27.671241] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   27.671400] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   27.671539] hpet0: 3 32-bit timers, 25000000 Hz
[   27.673708] Time: hpet clocksource has been installed.
[   27.673757] Switched to high resolution mode on CPU 0
[   27.673837] Switched to high resolution mode on CPU 1
[   27.680440] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   27.680480] system 00:05: ioport range 0x800-0x80f has been reserved
[   27.680519] system 00:05: ioport range 0x2000-0x207f has been reserved
[   27.680559] system 00:05: ioport range 0x2080-0x20ff has been reserved
[   27.683951] system 00:05: ioport range 0x2400-0x247f has been reserved
[   27.683990] system 00:05: ioport range 0x2480-0x24ff has been reserved
[   27.684030] system 00:05: ioport range 0x2800-0x287f has been reserved
[   27.684069] system 00:05: ioport range 0x2880-0x28ff has been reserved
[   27.684108] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   27.684148] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[   27.684187] system 00:05: iomem range 0x0-0x0 could not be reserved
[   27.684227] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[   27.684271] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[   27.684318] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[   27.684369] system 00:0a: ioport range 0x290-0x29f has been reserved
[   27.684411] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[   27.684457] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   27.684496] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   27.684535] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   27.684579] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[   27.684626] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
[   27.684908] PCI: Bridge: 0000:00:08.0
[   27.684945]   IO window: d000-dfff
[   27.684982]   MEM window: f9f00000-f9ffffff
[   27.685020]   PREFETCH window: disabled.
[   27.685057] PCI: Bridge: 0000:00:0b.0
[   27.685094]   IO window: c000-cfff
[   27.685130]   MEM window: f9e00000-f9efffff
[   27.685167]   PREFETCH window: disabled.
[   27.685204] PCI: Bridge: 0000:00:0c.0
[   27.685240]   IO window: disabled.
[   27.685277]   MEM window: disabled.
[   27.685313]   PREFETCH window: disabled.
[   27.685350] PCI: Bridge: 0000:00:0d.0
[   27.685386]   IO window: e000-efff
[   27.685423]   MEM window: fa000000-febfffff
[   27.685460]   PREFETCH window: d0000000-dfffffff
[   27.685497] PCI: Bridge: 0000:00:0e.0
[   27.685534]   IO window: disabled.
[   27.685570]   MEM window: disabled.
[   27.685606]   PREFETCH window: disabled.
[   27.685649] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   27.685657] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   27.685662] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   27.685667] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   27.685672] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   27.685678] NET: Registered protocol family 2
[   27.717007] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   27.717603] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   27.719026] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   27.719509] TCP: Hash tables configured (established 262144 bind 65536)
[   27.719549] TCP reno registered
[   27.727790] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[   27.727894] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[   27.727942] io scheduler noop registered
[   27.727980] io scheduler cfq registered (default)
[   27.728676] Boot video device is 0000:04:00.0
[   27.728779] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   27.728796] assign_interrupt_mode Found MSI capability
[   27.728849] Allocate Port Service[0000:00:0b.0:pcie00]
[   27.728891] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   27.728907] assign_interrupt_mode Found MSI capability
[   27.728955] Allocate Port Service[0000:00:0c.0:pcie00]
[   27.728992] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   27.729008] assign_interrupt_mode Found MSI capability
[   27.729056] Allocate Port Service[0000:00:0d.0:pcie00]
[   27.729094] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   27.729110] assign_interrupt_mode Found MSI capability
[   27.729158] Allocate Port Service[0000:00:0e.0:pcie00]
[   27.729331] input: Power Button (FF) as /class/input/input0
[   27.729369] ACPI: Power Button (FF) [PWRF]
[   27.729455] input: Power Button (CM) as /class/input/input1
[   27.729493] ACPI: Power Button (CM) [PWRB]
[   27.729627] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   27.729732] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   27.753629] Real Time Clock Driver v1.12ac
[   27.753749] hpet_resources: 0xfed00000 is busy
[   27.753766] Linux agpgart interface v0.102
[   27.753851] Driver 'sd' needs updating - please use bus_type methods
[   27.753925] ahci 0000:00:0a.0: version 3.0
[   27.754100] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   27.754143] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[   28.754676] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[   28.754728] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[   28.754767] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   28.754969] scsi0 : ahci
[   28.755064] scsi1 : ahci
[   28.755130] scsi2 : ahci
[   28.755196] scsi3 : ahci
[   28.755284] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315
[   28.755332] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315
[   28.755379] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315
[   28.755426] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315
[   29.386629] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   29.387240] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   29.387283] ata1.00: 312581808 sectors, multi 16: LBA48 
[   29.387918] ata1.00: configured for UDMA/133
[   30.018591] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   30.039146] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   30.039186] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   30.041191] ata2.00: configured for UDMA/133
[   30.357854] ata3: SATA link down (SStatus 0 SControl 300)
[   30.677160] ata4: SATA link down (SStatus 0 SControl 300)
[   30.677249] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
[   30.677359] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   30.677404] sd 0:0:0:0: [sda] Write Protect is off
[   30.677442] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   30.677450] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   30.677520] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   30.677563] sd 0:0:0:0: [sda] Write Protect is off
[   30.677601] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   30.677608] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   30.677657]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   30.713124] sd 0:0:0:0: [sda] Attached SCSI disk
[   30.713259] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[   30.713368] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   30.713412] sd 1:0:0:0: [sdb] Write Protect is off
[   30.713450] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   30.713459] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   30.713529] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   30.713572] sd 1:0:0:0: [sdb] Write Protect is off
[   30.713610] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   30.713617] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   30.713666]  sdb: sdb1 sdb2
[   30.720847] sd 1:0:0:0: [sdb] Attached SCSI disk
[   30.720984] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   30.723565] serio: i8042 KBD port at 0x60,0x64 irq 1
[   30.723604] serio: i8042 AUX port at 0x60,0x64 irq 12
[   30.757909] usbcore: registered new interface driver usbhid
[   30.757947] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   30.757991] TCP cubic registered
[   30.758030] NET: Registered protocol family 1
[   30.758087] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   30.758143] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   30.758183] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   30.758221] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   30.758259] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   30.758297] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   30.758335] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   30.758373] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   30.758411] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   30.785840] input: AT Translated Set 2 keyboard as /class/input/input2
[   30.884040] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[   30.884083] ReiserFS: sda3: using ordered data mode
[   30.893590] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   30.894500] ReiserFS: sda3: checking transaction log (sda3)
[   30.937895] ReiserFS: sda3: Using r5 hash to sort names
[   30.937946] VFS: Mounted root (reiserfs filesystem) readonly.
[   30.937996] Freeing unused kernel memory: 176k freed
[   31.240623] Clocksource tsc unstable (delta = -101952042 ns)
[   32.785186] ReiserFS: sda3: switching to journaled data mode
[   33.851423] r8169 Gigabit Ethernet driver 2.2LK loaded
[   33.851628] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   33.851633] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[   33.851642] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   33.851789] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 314
[   33.855223] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   33.855229] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[   33.855374] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   33.855377] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   33.855458] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   33.855480] ehci_hcd 0000:00:02.1: debug port 1
[   33.855483] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   33.855489] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   33.858684] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   33.858754] usb usb1: configuration #1 chosen from 1 choice
[   33.858768] hub 1-0:1.0: USB hub found
[   33.858773] hub 1-0:1.0: 10 ports detected
[   33.969146] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   33.994089] reiser4: sdb2: found disk format 4.0.0.
[   34.009535] usb 1-3: configuration #1 chosen from 1 choice
[   34.009727] hub 1-3:1.0: USB hub found
[   34.010451] hub 1-3:1.0: 4 ports detected
[   34.106728] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[   34.141157] usb 1-3.1: configuration #1 chosen from 1 choice
[   34.144754] input: Logitech USB Receiver as /class/input/input3
[   34.153515] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   34.155582] input: Logitech USB Receiver as /class/input/input4
[   34.160990] mice: PS/2 mouse device common for all mice
[   34.175696] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   42.876614] reiser4: sda6: found disk format 4.0.0.
[   43.324415] reiser4: sdb1: found disk format 4.0.0.
[   43.741998] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[   45.013198] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   45.013203] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[   45.014300] Audigy2 value: Special config.
[   46.597359] w83627ehf: Found W83627EHG chip at 0x290
[   47.883333] r8169: eth0: link up
[   47.883342] r8169: eth0: link up
[   48.563063] NET: Registered protocol family 17
[   51.559910] nvidia: module license 'NVIDIA' taints kernel.
[   51.731619] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[   51.731627] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNED] -> GSI 17 (level, low) -> IRQ 17
[   51.731632] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   51.731723] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  171.06  Wed Feb 20 09:02:26 PST 2008

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-17  7:16   ` 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3 Volker Armin Hemmann
@ 2008-03-18  7:36     ` Tejun Heo
  2008-03-18 10:59       ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Tejun Heo @ 2008-03-18  7:36 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide

Hello,

Volker Armin Hemmann wrote:
> I tried some more stuff, replaced the cables, played with bios settings.
> 
> No change.
> 
> Then I updated to 2.6.24.3 - and no hangs or 'softreset' failures anymore.

I don't see any libata changes which can cause such difference.  Weird.
 Is this result reliably reproducible?

> The only change to other kernels was making ehci-hcd modular. 

Hmmm...

> I checked already, other kernels still have the IDENTITY error on coldboot and 
> the softreset failure on reboot even with the changed config.

Hmmm...

> 2.6.24.2 and 2.6.24.3 both have the reiser4 patch added.
> 
> So
> 2.6.24.2 = bad
> 2.6.24.3 = good
> 2.6.25-rc5 = bad 
> 
> Setting AHCI in bios still results in timeouts and harddisks not found.

Does pci=nomsi help?

-- 
tejun

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-18  7:36     ` Tejun Heo
@ 2008-03-18 10:59       ` Volker Armin Hemmann
  2008-03-18 12:56         ` Tejun Heo
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-03-18 10:59 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide

[-- Attachment #1: Type: text/plain, Size: 5283 bytes --]

On Dienstag, 18. März 2008, Tejun Heo wrote:
> Hello,
>
> Volker Armin Hemmann wrote:
> > I tried some more stuff, replaced the cables, played with bios settings.
> >
> > No change.
> >
> > Then I updated to 2.6.24.3 - and no hangs or 'softreset' failures
> > anymore.
>
> I don't see any libata changes which can cause such difference.  Weird.
>  Is this result reliably reproducible?

it was for a little bit more than 24h. I booted and rebooted several times to 
make sure - and everything was fine, but after a good night and on the Xth 
boot, the hang occured again - and since then it is there. Reliable on every 
boot :( 
(and the softreset failed message on reboots).
Of course, I booted and rebooted several times. And it stays.

Maybe it is the hardware. But I replaced the cables already and smart says the 
disk is ok.

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA
_of_first_error
# 1  Short offline       Completed without error       00%      8124         -
# 2  Short offline       Completed without error       00%      8067         -
# 3  Short offline       Completed without error       00%      3402         -
# 4  Extended offline    Completed without error       00%      3374         -
<snip>



>
> > 2.6.24.2 and 2.6.24.3 both have the reiser4 patch added.
> >
> > So
> > 2.6.24.2 = bad
> > 2.6.24.3 = good

it only was good for a couple of boots. 

> > 2.6.25-rc5 = bad
> >
> > Setting AHCI in bios still results in timeouts and harddisks not found.
>
> Does pci=nomsi help?

oh yes!
 It does. I changed the 'Sata operation mode' setting from 'non raid' to AHCI, 
booted with that option:

[   35.026629] Driver 'sd' needs updating - please use bus_type methods
[   35.026702] ahci 0000:00:0a.0: version 3.0
[   35.026877] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   35.026922] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   36.029726] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl SATA mode
[   36.029777] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[   36.029817] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   36.030019] scsi0 : ahci
[   36.030114] scsi1 : ahci
[   36.030180] scsi2 : ahci
[   36.030245] scsi3 : ahci
[   36.030333] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 23
[   36.030381] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 23
[   36.030428] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 23
[   36.030476] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 23
[   36.659406] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   36.660019] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   36.660062] ata1.00: 312581808 sectors, multi 16: LBA48
[   36.660680] ata1.00: configured for UDMA/133
[   37.291368] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   37.311928] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   37.311968] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   37.313968] ata2.00: configured for UDMA/133
[   37.630631] ata3: SATA link down (SStatus 0 SControl 300)
[   37.949937] ata4: SATA link down (SStatus 0 SControl 300)
[   37.950026] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   37.950136] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   37.950181] sd 0:0:0:0: [sda] Write Protect is off
[   37.950219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.950227] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   37.950297] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   37.950340] sd 0:0:0:0: [sda] Write Protect is off
[   37.950378] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.950385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   37.950434]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   37.984324] sd 0:0:0:0: [sda] Attached SCSI disk
[   37.984459] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   37.984568] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   37.984612] sd 1:0:0:0: [sdb] Write Protect is off
[   37.984650] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   37.984659] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   37.984729] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   37.984772] sd 1:0:0:0: [sdb] Write Protect is off
[   37.984810] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   37.984817] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   37.984866]  sdb: sdb1 sdb2
[   37.994164] sd 1:0:0:0: [sdb] Attached SCSI disk

the most obvious change are the different interrupts: 23 instead of 315 
(non-raid, without nosmi) or 218 (systemrescuecd 1.0, ahci setting, without 
nosmi)

full dmesg is attached.

Thanks for looking into this mess.

Glück Auf,
Volker

[-- Attachment #2: dmesg_2.6.24.3_nosmi --]
[-- Type: text/plain, Size: 25062 bytes --]

[    0.000000] Linux version 2.6.24.3reiser4 (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Sun Mar 16 20:32:58 CET 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6 pci=nomsi
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 853 pages reserved
[    0.000000]   DMA zone: 3090 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030522
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6 pci=nomsi
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   34.594710] Marking TSC unstable due to TSCs unsynchronized
[   34.594711] time.c: Detected 3013.887 MHz processor.
[   34.598537] Console: colour VGA+ 80x25
[   34.598539] console [tty6] enabled
[   34.603172] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   34.605402] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   34.606172] Checking aperture...
[   34.606210] CPU 0: aperture @ ecca000000 size 32 MB
[   34.606247] Aperture too small (32 MB)
[   34.612116] No AGP bridge found
[   34.612152] Your BIOS doesn't leave a aperture memory hole
[   34.612190] Please enable the IOMMU option in the BIOS setup
[   34.612228] This costs you 64 MB of RAM
[   34.637460] Mapping aperture over 65536 KB of RAM @ 8000000
[   34.661594] Memory: 4049948k/4980736k available (2192k kernel code, 143428k reserved, 681k data, 176k init)
[   34.661662] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   34.744360] Calibrating delay using timer specific routine.. 6034.68 BogoMIPS (lpj=10053891)
[   34.744453] Mount-cache hash table entries: 256
[   34.744559] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   34.744599] CPU: L2 Cache: 1024K (64 bytes/line)
[   34.744637] CPU: Physical Processor ID: 0
[   34.744673] CPU: Processor Core ID: 0
[   34.744726] SMP alternatives: switching to UP code
[   34.745090] ACPI: Core revision 20070126
[   34.780262] Using local APIC timer interrupts.
[   34.813406] APIC timer calibration result 12557872
[   34.813408] Detected 12.557 MHz APIC timer.
[   34.813493] SMP alternatives: switching to SMP code
[   34.813723] Booting processor 1/2 APIC 0x1
[   34.823842] Initializing CPU#1
[   34.906605] Calibrating delay using timer specific routine.. 6030.92 BogoMIPS (lpj=10046281)
[   34.906609] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   34.906611] CPU: L2 Cache: 1024K (64 bytes/line)
[   34.906612] CPU: Physical Processor ID: 0
[   34.906613] CPU: Processor Core ID: 1
[   34.906694] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   34.906751] Brought up 2 CPUs
[   34.907209] net_namespace: 120 bytes
[   34.907441] NET: Registered protocol family 16
[   34.907553] ACPI: bus type pci registered
[   34.907635] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   34.907674] PCI: Not using MMCONFIG.
[   34.907710] PCI: Using configuration type 1
[   34.909951] ACPI: EC: Look up EC in DSDT
[   34.913397] ACPI: Interpreter enabled
[   34.913434] ACPI: (supports S0 S1 S3 S4 S5)
[   34.913604] ACPI: Using IOAPIC for interrupt routing
[   34.913814] Error attaching device data
[   34.913853] Error attaching device data
[   34.913892] Error attaching device data
[   34.913930] Error attaching device data
[   34.918844] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   34.919369] PCI: Transparent bridge - 0000:00:08.0
[   34.919663] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   34.919795] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   34.919892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   34.919948] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   34.920002] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   34.920058] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   34.923995] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   34.924331] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   34.924666] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[   34.925027] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[   34.925387] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[   34.925747] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   34.926081] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[   34.926441] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   34.926777] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   34.927112] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[   34.927472] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   34.927807] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[   34.928167] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[   34.928528] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   34.928862] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[   34.929223] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   34.929557] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[   34.929954] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[   34.930315] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[   34.930676] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[   34.930995] Linux Plug and Play Support v0.97 (c) Adam Belay
[   34.931048] pnp: PnP ACPI init
[   34.931087] ACPI: bus type pnp registered
[   34.933625] pnp: PnP ACPI: found 13 devices
[   34.933662] ACPI: ACPI bus type pnp unregistered
[   34.933785] SCSI subsystem initialized
[   34.933842] libata version 3.00 loaded.
[   34.933892] usbcore: registered new interface driver usbfs
[   34.933948] usbcore: registered new interface driver hub
[   34.934004] usbcore: registered new device driver usb
[   34.934088] PCI: Using ACPI for IRQ routing
[   34.934125] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   34.943200] PCI-DMA: Disabling AGP.
[   34.943936] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   34.943978] PCI-DMA: using GART IOMMU.
[   34.944017] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   34.944176] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   34.944316] hpet0: 3 32-bit timers, 25000000 Hz
[   34.946485] Time: hpet clocksource has been installed.
[   34.946534] Switched to high resolution mode on CPU 0
[   34.946623] Switched to high resolution mode on CPU 1
[   34.953217] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   34.956617] system 00:05: ioport range 0x800-0x80f has been reserved
[   34.956656] system 00:05: ioport range 0x2000-0x207f has been reserved
[   34.956696] system 00:05: ioport range 0x2080-0x20ff has been reserved
[   34.956735] system 00:05: ioport range 0x2400-0x247f has been reserved
[   34.956774] system 00:05: ioport range 0x2480-0x24ff has been reserved
[   34.956814] system 00:05: ioport range 0x2800-0x287f has been reserved
[   34.956853] system 00:05: ioport range 0x2880-0x28ff has been reserved
[   34.956892] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   34.956931] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[   34.956971] system 00:05: iomem range 0x0-0x0 could not be reserved
[   34.957011] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[   34.957055] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[   34.957102] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[   34.957153] system 00:0a: ioport range 0x290-0x29f has been reserved
[   34.957196] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[   34.957241] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   34.957280] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   34.957323] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   34.957363] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[   34.957410] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
[   34.957692] PCI: Bridge: 0000:00:08.0
[   34.957729]   IO window: d000-dfff
[   34.957766]   MEM window: f9f00000-f9ffffff
[   34.957804]   PREFETCH window: disabled.
[   34.957841] PCI: Bridge: 0000:00:0b.0
[   34.957878]   IO window: c000-cfff
[   34.957914]   MEM window: f9e00000-f9efffff
[   34.957951]   PREFETCH window: disabled.
[   34.957988] PCI: Bridge: 0000:00:0c.0
[   34.958024]   IO window: disabled.
[   34.958061]   MEM window: disabled.
[   34.958097]   PREFETCH window: disabled.
[   34.958134] PCI: Bridge: 0000:00:0d.0
[   34.958171]   IO window: e000-efff
[   34.958207]   MEM window: fa000000-febfffff
[   34.958244]   PREFETCH window: d0000000-dfffffff
[   34.958282] PCI: Bridge: 0000:00:0e.0
[   34.958318]   IO window: disabled.
[   34.958354]   MEM window: disabled.
[   34.958391]   PREFETCH window: disabled.
[   34.958433] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   34.958442] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   34.958447] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   34.958452] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   34.958456] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   34.958462] NET: Registered protocol family 2
[   34.989784] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   34.990379] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   34.991804] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   34.992283] TCP: Hash tables configured (established 262144 bind 65536)
[   34.992323] TCP reno registered
[   35.000566] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[   35.000670] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[   35.000717] io scheduler noop registered
[   35.000756] io scheduler cfq registered (default)
[   35.001452] Boot video device is 0000:04:00.0
[   35.001555] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   35.001572] assign_interrupt_mode Found MSI capability
[   35.001613] Allocate Port Service[0000:00:0b.0:pcie00]
[   35.001655] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   35.001671] assign_interrupt_mode Found MSI capability
[   35.001709] Allocate Port Service[0000:00:0c.0:pcie00]
[   35.001745] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   35.001761] assign_interrupt_mode Found MSI capability
[   35.001800] Allocate Port Service[0000:00:0d.0:pcie00]
[   35.001837] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   35.001853] assign_interrupt_mode Found MSI capability
[   35.001891] Allocate Port Service[0000:00:0e.0:pcie00]
[   35.002065] input: Power Button (FF) as /class/input/input0
[   35.002103] ACPI: Power Button (FF) [PWRF]
[   35.002188] input: Power Button (CM) as /class/input/input1
[   35.002227] ACPI: Power Button (CM) [PWRB]
[   35.002361] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   35.002466] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   35.026407] Real Time Clock Driver v1.12ac
[   35.026526] hpet_resources: 0xfed00000 is busy
[   35.026543] Linux agpgart interface v0.102
[   35.026629] Driver 'sd' needs updating - please use bus_type methods
[   35.026702] ahci 0000:00:0a.0: version 3.0
[   35.026877] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   35.026922] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[   36.029726] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[   36.029777] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[   36.029817] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   36.030019] scsi0 : ahci
[   36.030114] scsi1 : ahci
[   36.030180] scsi2 : ahci
[   36.030245] scsi3 : ahci
[   36.030333] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 23
[   36.030381] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 23
[   36.030428] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 23
[   36.030476] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 23
[   36.659406] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   36.660019] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   36.660062] ata1.00: 312581808 sectors, multi 16: LBA48 
[   36.660680] ata1.00: configured for UDMA/133
[   37.291368] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   37.311928] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   37.311968] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   37.313968] ata2.00: configured for UDMA/133
[   37.630631] ata3: SATA link down (SStatus 0 SControl 300)
[   37.949937] ata4: SATA link down (SStatus 0 SControl 300)
[   37.950026] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
[   37.950136] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   37.950181] sd 0:0:0:0: [sda] Write Protect is off
[   37.950219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.950227] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.950297] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   37.950340] sd 0:0:0:0: [sda] Write Protect is off
[   37.950378] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   37.950385] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.950434]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   37.984324] sd 0:0:0:0: [sda] Attached SCSI disk
[   37.984459] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[   37.984568] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   37.984612] sd 1:0:0:0: [sdb] Write Protect is off
[   37.984650] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   37.984659] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.984729] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   37.984772] sd 1:0:0:0: [sdb] Write Protect is off
[   37.984810] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   37.984817] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   37.984866]  sdb: sdb1 sdb2
[   37.994164] sd 1:0:0:0: [sdb] Attached SCSI disk
[   37.994301] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   37.996942] serio: i8042 KBD port at 0x60,0x64 irq 1
[   37.996982] serio: i8042 AUX port at 0x60,0x64 irq 12
[   38.027362] usbcore: registered new interface driver usbhid
[   38.027401] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   38.027445] TCP cubic registered
[   38.027484] NET: Registered protocol family 1
[   38.027539] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   38.027584] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   38.027624] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   38.027662] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   38.027700] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   38.027738] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   38.027776] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   38.027815] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   38.027853] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   38.053987] input: AT Translated Set 2 keyboard as /class/input/input2
[   38.146929] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[   38.146972] ReiserFS: sda3: using ordered data mode
[   38.156481] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   38.157392] ReiserFS: sda3: checking transaction log (sda3)
[   38.200787] ReiserFS: sda3: Using r5 hash to sort names
[   38.200838] VFS: Mounted root (reiserfs filesystem) readonly.
[   38.200887] Freeing unused kernel memory: 176k freed
[   38.480137] Clocksource tsc unstable (delta = -135289750 ns)
[   40.000024] ReiserFS: sda3: switching to journaled data mode
[   40.140567] r8169 Gigabit Ethernet driver 2.2LK loaded
[   40.140772] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   40.140777] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[   40.140785] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   40.140790] r8169 0000:01:00.0: no MSI. Back to INTx.
[   40.140914] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 19
[   40.146015] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   40.146021] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[   40.146171] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   40.146174] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   40.146248] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   40.146269] ehci_hcd 0000:00:02.1: debug port 1
[   40.146271] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   40.146278] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   40.149046] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   40.149116] usb usb1: configuration #1 chosen from 1 choice
[   40.149131] hub 1-0:1.0: USB hub found
[   40.149136] hub 1-0:1.0: 10 ports detected
[   40.258499] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   40.296057] reiser4: sdb2: found disk format 4.0.0.
[   40.301115] usb 1-3: configuration #1 chosen from 1 choice
[   40.301307] hub 1-3:1.0: USB hub found
[   40.302020] hub 1-3:1.0: 4 ports detected
[   40.398307] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[   40.428288] usb 1-3.1: configuration #1 chosen from 1 choice
[   40.431891] input: Logitech USB Receiver as /class/input/input3
[   40.437320] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   40.439385] input: Logitech USB Receiver as /class/input/input4
[   40.455077] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   40.463944] mice: PS/2 mouse device common for all mice
[   48.714006] reiser4: sda6: found disk format 4.0.0.
[   49.173963] reiser4: sdb1: found disk format 4.0.0.
[   49.537860] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[   52.661003] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   52.661012] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[   52.663793] Audigy2 value: Special config.
[   54.558692] w83627ehf: Found W83627EHG chip at 0x290
[   55.654993] r8169: eth0: link up
[   55.655000] r8169: eth0: link up
[   56.073125] NET: Registered protocol family 17
[   59.453903] nvidia: module license 'NVIDIA' taints kernel.
[   59.625059] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[   59.625067] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNED] -> GSI 17 (level, low) -> IRQ 17
[   59.625072] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   59.625155] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  171.06  Wed Feb 20 09:02:26 PST 2008

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-18 10:59       ` Volker Armin Hemmann
@ 2008-03-18 12:56         ` Tejun Heo
  2008-03-18 13:33           ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Tejun Heo @ 2008-03-18 12:56 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide

[-- Attachment #1: Type: text/plain, Size: 1016 bytes --]

Volker Armin Hemmann wrote:
> it was for a little bit more than 24h. I booted and rebooted several times to 
> make sure - and everything was fine, but after a good night and on the Xth 
> boot, the hang occured again - and since then it is there. Reliable on every 
> boot :( 
> (and the softreset failed message on reboots).
> Of course, I booted and rebooted several times. And it stays.
> 
> Maybe it is the hardware. But I replaced the cables already and smart says the 
> disk is ok.

Does the attached patch make any difference?

>>> Setting AHCI in bios still results in timeouts and harddisks not found.
>> Does pci=nomsi help?
> 
> oh yes!
>  It does. I changed the 'Sata operation mode' setting from 'non raid' to AHCI, 
> booted with that option:
> 
> the most obvious change are the different interrupts: 23 instead of 315 
> (non-raid, without nosmi) or 218 (systemrescuecd 1.0, ahci setting, without 
> nosmi)

Yeah, that sounds about right.  Hmm... Can you post the result of "lspci
-nn"?

-- 
tejun

[-- Attachment #2: ahci-no-hrst.patch --]
[-- Type: text/x-patch, Size: 791 bytes --]

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6978469..5065404 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -402,6 +402,7 @@ static const struct ata_port_operations ahci_p5wdh_ops = {
 static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci */
 	{
+		AHCI_HFLAGS	(AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
 		.link_flags	= AHCI_LFLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
@@ -1863,7 +1864,7 @@ static void ahci_error_handler(struct ata_port *ap)
 
 	/* perform recovery */
 	sata_pmp_do_eh(ap, ata_std_prereset, ahci_softreset,
-		       ahci_hardreset, ahci_postreset,
+		       NULL/*ahci_hardreset*/, ahci_postreset,
 		       sata_pmp_std_prereset, ahci_pmp_softreset,
 		       sata_pmp_std_hardreset, sata_pmp_std_postreset);
 }

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-18 12:56         ` Tejun Heo
@ 2008-03-18 13:33           ` Volker Armin Hemmann
  2008-03-19  3:26             ` Tejun Heo
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-03-18 13:33 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide

On Dienstag, 18. März 2008, Tejun Heo wrote:
>  failed message on reboots).
>
> > Of course, I booted and rebooted several times. And it stays.
> >
> > Maybe it is the hardware. But I replaced the cables already and smart
> > says the disk is ok.
>
> Does the attached patch make any difference?

patching file drivers/ata/ahci.c
Hunk #1 succeeded at 397 (offset -5 lines).
Hunk #2 succeeded at 1819 (offset -45 lines).

built&booted, same results as allways. With non-raid setting, IDENTIFY error 
on cold boot and sofreset error on reboot:
(with patch, without nosmi):

cold boot:
[   35.397857] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[   36.398054] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   36.398102] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio
[   36.398142] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   36.398343] scsi0 : ahci
[   36.398439] scsi1 : ahci
[   36.398505] scsi2 : ahci
[   36.398570] scsi3 : ahci
[   36.398659] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   36.398707] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   36.398754] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   36.398801] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   36.870357] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   66.805287] ata1.00: qc timeout (cmd 0xec)
[   66.805326] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   66.805365] ata1: failed to recover some devices, retrying in 5 secs
[   72.270071] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   72.270674] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   72.270716] ata1.00: 312581808 sectors, multi 16: LBA48
[   72.271355] ata1.00: configured for UDMA/133
[   72.742378] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   72.762946] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   72.762986] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   72.764976] ata2.00: configured for UDMA/133
[   73.074987] ata3: SATA link down (SStatus 0 SControl 300)
[   73.387641] ata4: SATA link down (SStatus 0 SControl 300)
[   73.387729] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   73.387839] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   73.387883] sd 0:0:0:0: [sda] Write Protect is off
[   73.387921] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   73.387929] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   73.387999] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   73.388042] sd 0:0:0:0: [sda] Write Protect is off
[   73.388080] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   73.388087] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   73.388136]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   73.418040] sd 0:0:0:0: [sda] Attached SCSI disk
[   73.418174] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   73.418282] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   73.418327] sd 1:0:0:0: [sdb] Write Protect is off
[   73.418365] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   73.418373] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   73.418448] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   73.418491] sd 1:0:0:0: [sdb] Write Protect is off
[   73.418529] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   73.418537] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   73.418586]  sdb: sdb1 sdb2
[   73.441032] sd 1:0:0:0: [sdb] Attached SCSI disk


reboot:
[   47.228096] ahci 0000:00:0a.0: version 3.0
[   47.228271] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   47.228315] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   47.228649] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[   48.228845] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   48.228893] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio
[   48.228932] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   48.229134] scsi0 : ahci
[   48.229230] scsi1 : ahci
[   48.229296] scsi2 : ahci
[   48.229361] scsi3 : ahci
[   48.229450] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   48.229497] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   48.229545] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   48.229592] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   53.703608] ata1: port is slow to respond, please be patient (Status 0xd0)
[   58.546416] ata1: softreset failed (device not ready)
[   58.706072] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   58.706695] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   58.706738] ata1.00: 312581808 sectors, multi 16: LBA48
[   58.707375] ata1.00: configured for UDMA/133
[   59.178379] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   59.198957] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   59.198996] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   59.200994] ata2.00: configured for UDMA/133
[   59.510988] ata3: SATA link down (SStatus 0 SControl 300)
[   59.823642] ata4: SATA link down (SStatus 0 SControl 300)
[   59.823730] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   59.823841] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   59.823885] sd 0:0:0:0: [sda] Write Protect is off
[   59.823923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   59.823931] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   59.824001] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   59.824044] sd 0:0:0:0: [sda] Write Protect is off
[   59.824081] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   59.824089] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   59.824138]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   59.854855] sd 0:0:0:0: [sda] Attached SCSI disk
[   59.854992] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   59.855100] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   59.855145] sd 1:0:0:0: [sdb] Write Protect is off
[   59.855183] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   59.855192] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   59.855261] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   59.855304] sd 1:0:0:0: [sdb] Write Protect is off
[   59.855342] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   59.855349] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   59.855399]  sdb: sdb1 sdb2
[   59.902185] sd 1:0:0:0: [sdb] Attached SCSI disk

>
> >>> Setting AHCI in bios still results in timeouts and harddisks not found.
> >>
> >> Does pci=nomsi help?
> >
> > oh yes!
> >  It does. I changed the 'Sata operation mode' setting from 'non raid' to
> > AHCI, booted with that option:
> >
> > the most obvious change are the different interrupts: 23 instead of 315
> > (non-raid, without nosmi) or 218 (systemrescuecd 1.0, ahci setting,
> > without nosmi)

btw, with 2.6.24.3, without nosmi and my own config it stays at 315. So 
non-raid and ahci both get the same interrupt, and the same error (ahci 
always gives the IDENTIFY error, on cold boots and reboots). But non-raid 
finds the harddisks at the end, ahci does not.

>
> Yeah, that sounds about right.  Hmm... Can you post the result of "lspci
> -nn"?

lspci -nn
00:00.0 RAM memory [0500]: nVidia Corporation MCP65 Memory Controller 
[10de:0444] (rev a1)
00:01.0 ISA bridge [0601]: nVidia Corporation MCP65 LPC Bridge [10de:0441] 
(rev a2)
00:01.1 SMBus [0c05]: nVidia Corporation MCP65 SMBus [10de:0446] (rev a1)
00:01.2 RAM memory [0500]: nVidia Corporation MCP65 Memory Controller 
[10de:0445] (rev a1)
00:02.0 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller 
[10de:0454] (rev a1)
00:02.1 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller 
[10de:0455] (rev a1)
00:08.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI bridge [10de:0449] 
(rev a1)
00:09.0 IDE interface [0101]: nVidia Corporation MCP65 IDE [10de:0448] (rev 
a1)
00:0a.0 SATA controller [0106]: nVidia Corporation MCP65 AHCI Controller 
[10de:044d] (rev a1)
00:0b.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:045b] (rev 
a1)
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge 
[10de:045a] (rev a1)
00:0d.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge 
[10de:0458] (rev a1)
00:0e.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge 
[10de:0459] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control [1022:1103]
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
02:08.0 SCSI storage controller [0100]: Adaptec AHA-2944UW / AIC-7884U 
[9004:8478] (rev 01)
02:09.0 Multimedia audio controller [0401]: Creative Labs SB0400 Audigy2 Value 
[1102:0008]
04:00.0 VGA compatible controller [0300]: nVidia Corporation Unknown device 
[10de:0402] (rev a1)

Glück Auf,
Volker


^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-18 13:33           ` Volker Armin Hemmann
@ 2008-03-19  3:26             ` Tejun Heo
  2008-03-19  3:27               ` Tejun Heo
  0 siblings, 1 reply; 52+ messages in thread
From: Tejun Heo @ 2008-03-19  3:26 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide

Volker Armin Hemmann wrote:
> On Dienstag, 18. März 2008, Tejun Heo wrote:
>>  failed message on reboots).
>>
>>> Of course, I booted and rebooted several times. And it stays.
>>>
>>> Maybe it is the hardware. But I replaced the cables already and smart
>>> says the disk is ok.
>> Does the attached patch make any difference?
> 
> patching file drivers/ata/ahci.c
> Hunk #1 succeeded at 397 (offset -5 lines).
> Hunk #2 succeeded at 1819 (offset -45 lines).

It's okay.  It's because I was lazy and generated the patch against
devel tree.

> built&booted, same results as allways. With non-raid setting, IDENTIFY error 
> on cold boot and sofreset error on reboot:
> (with patch, without nosmi):

Oh... I see.  I made a mistake.  In ahci.c, what I intended was making
ahci_softreset NULL not ahci_hardreset.  Can you please change that and
test again?

-- 
tejun

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-19  3:26             ` Tejun Heo
@ 2008-03-19  3:27               ` Tejun Heo
  2008-03-19  7:53                 ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Tejun Heo @ 2008-03-19  3:27 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide

[-- Attachment #1: Type: text/plain, Size: 954 bytes --]

Tejun Heo wrote:
> Volker Armin Hemmann wrote:
>> On Dienstag, 18. März 2008, Tejun Heo wrote:
>>>  failed message on reboots).
>>>
>>>> Of course, I booted and rebooted several times. And it stays.
>>>>
>>>> Maybe it is the hardware. But I replaced the cables already and smart
>>>> says the disk is ok.
>>> Does the attached patch make any difference?
>> patching file drivers/ata/ahci.c
>> Hunk #1 succeeded at 397 (offset -5 lines).
>> Hunk #2 succeeded at 1819 (offset -45 lines).
> 
> It's okay.  It's because I was lazy and generated the patch against
> devel tree.
> 
>> built&booted, same results as allways. With non-raid setting, IDENTIFY error 
>> on cold boot and sofreset error on reboot:
>> (with patch, without nosmi):
> 
> Oh... I see.  I made a mistake.  In ahci.c, what I intended was making
> ahci_softreset NULL not ahci_hardreset.  Can you please change that and
> test again?
> 

Just in case, here's the updated patch.

-- 
tejun

[-- Attachment #2: ahci-no-srst.patch --]
[-- Type: text/x-patch, Size: 805 bytes --]

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6978469..46b7e48 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -402,6 +402,7 @@ static const struct ata_port_operations ahci_p5wdh_ops = {
 static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci */
 	{
+		AHCI_HFLAGS	(AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
 		.link_flags	= AHCI_LFLAG_COMMON,
 		.pio_mask	= 0x1f, /* pio0-4 */
@@ -1862,7 +1863,7 @@ static void ahci_error_handler(struct ata_port *ap)
 	}
 
 	/* perform recovery */
-	sata_pmp_do_eh(ap, ata_std_prereset, ahci_softreset,
+	sata_pmp_do_eh(ap, ata_std_prereset, NULL/*ahci_softreset*/,
 		       ahci_hardreset, ahci_postreset,
 		       sata_pmp_std_prereset, ahci_pmp_softreset,
 		       sata_pmp_std_hardreset, sata_pmp_std_postreset);

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-19  3:27               ` Tejun Heo
@ 2008-03-19  7:53                 ` Volker Armin Hemmann
  2008-03-19  8:58                   ` Tejun Heo
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-03-19  7:53 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide

[-- Attachment #1: Type: text/plain, Size: 6742 bytes --]

Hi,
On Mittwoch, 19. März 2008, Tejun Heo wrote:
> Tejun Heo wrote:

> Just in case, here's the updated patch.

I tried your patch (on freshly unpacked sources).

non-raid setting in bios,

coldboot:

[   37.123980] ahci 0000:00:0a.0: version 3.0
[   37.124155] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   37.124199] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   37.124533] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[   38.124731] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   38.124780] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio
[   38.124819] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   38.125020] scsi0 : ahci
[   38.125116] scsi1 : ahci
[   38.125182] scsi2 : ahci
[   38.125248] scsi3 : ahci
[   38.125337] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   38.125384] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   38.125432] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
[   38.598405] ata1.00: configured for UDMA/133
[   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   39.086268] ata2.00: configured for UDMA/133
[   39.405277] ata3: SATA link down (SStatus 0 SControl 300)
[   39.724583] ata4: SATA link down (SStatus 0 SControl 300)
[   39.724672] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   39.724782] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   39.724826] sd 0:0:0:0: [sda] Write Protect is off
[   39.724864] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   39.724872] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   39.724942] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   39.724985] sd 0:0:0:0: [sda] Write Protect is off
[   39.725023] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   39.725030] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   39.725079]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   39.763787] sd 0:0:0:0: [sda] Attached SCSI disk
[   39.763923] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   39.764032] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   39.764077] sd 1:0:0:0: [sdb] Write Protect is off
[   39.764115] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   39.764124] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   39.764194] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   39.764237] sd 1:0:0:0: [sdb] Write Protect is off
[   39.764275] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   39.764283] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   39.764332]  sdb: sdb1 sdb2
[   39.793043] sd 1:0:0:0: [sdb] Attached SCSI disk

reboot:
[   39.522696] ahci 0000:00:0a.0: version 3.0
[   39.522871] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   39.522914] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   39.523247] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[   40.523447] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   40.523496] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio
[   40.523535] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   40.523737] scsi0 : ahci
[   40.523832] scsi1 : ahci
[   40.523898] scsi2 : ahci
[   40.523964] scsi3 : ahci
[   40.524053] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   40.524100] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   40.524148] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   40.524195] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   40.995751] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   40.996374] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   40.996416] ata1.00: 312581808 sectors, multi 16: LBA48
[   40.997049] ata1.00: configured for UDMA/133
[   41.468058] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   41.471873] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   41.471913] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   41.473917] ata2.00: configured for UDMA/133
[   41.790689] ata3: SATA link down (SStatus 0 SControl 300)
[   42.109995] ata4: SATA link down (SStatus 0 SControl 300)
[   42.110084] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   42.110194] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   42.110238] sd 0:0:0:0: [sda] Write Protect is off
[   42.110276] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   42.110284] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   42.110354] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   42.110397] sd 0:0:0:0: [sda] Write Protect is off
[   42.110435] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   42.110442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   42.110492]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   42.140153] sd 0:0:0:0: [sda] Attached SCSI disk
[   42.140289] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   42.140398] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   42.140443] sd 1:0:0:0: [sdb] Write Protect is off
[   42.140481] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   42.140489] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   42.140559] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   42.140602] sd 1:0:0:0: [sdb] Write Protect is off
[   42.140639] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   42.140647] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   42.140696]  sdb: sdb1 sdb2
[   42.167607] sd 1:0:0:0: [sdb] Attached SCSI disk

Full dmesgs attached.

Glück Auf
Volker

[-- Attachment #2: dmesg_2.6.24.3reiser4ahci_no_srst_coldboot --]
[-- Type: text/plain, Size: 24679 bytes --]

[    0.000000] Linux version 2.6.24.3reiser4ahci_no_srst (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Mar 19 07:57:35 CET 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 853 pages reserved
[    0.000000]   DMA zone: 3090 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030522
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   36.691985] Marking TSC unstable due to TSCs unsynchronized
[   36.691986] time.c: Detected 3013.887 MHz processor.
[   36.695815] Console: colour VGA+ 80x25
[   36.695817] console [tty6] enabled
[   36.700423] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   36.702652] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   36.703423] Checking aperture...
[   36.703461] CPU 0: aperture @ ecc8000000 size 32 MB
[   36.703499] Aperture too small (32 MB)
[   36.709379] No AGP bridge found
[   36.709415] Your BIOS doesn't leave a aperture memory hole
[   36.709453] Please enable the IOMMU option in the BIOS setup
[   36.709491] This costs you 64 MB of RAM
[   36.734719] Mapping aperture over 65536 KB of RAM @ 8000000
[   36.758840] Memory: 4049948k/4980736k available (2192k kernel code, 143428k reserved, 681k data, 176k init)
[   36.758909] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   36.841634] Calibrating delay using timer specific routine.. 6034.68 BogoMIPS (lpj=10053897)
[   36.841727] Mount-cache hash table entries: 256
[   36.841834] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   36.841873] CPU: L2 Cache: 1024K (64 bytes/line)
[   36.841912] CPU: Physical Processor ID: 0
[   36.841948] CPU: Processor Core ID: 0
[   36.842001] SMP alternatives: switching to UP code
[   36.842364] ACPI: Core revision 20070126
[   36.877541] Using local APIC timer interrupts.
[   36.910685] APIC timer calibration result 12557870
[   36.910686] Detected 12.557 MHz APIC timer.
[   36.910772] SMP alternatives: switching to SMP code
[   36.911002] Booting processor 1/2 APIC 0x1
[   36.921189] Initializing CPU#1
[   37.003951] Calibrating delay using timer specific routine.. 6030.92 BogoMIPS (lpj=10046282)
[   37.003956] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   37.003957] CPU: L2 Cache: 1024K (64 bytes/line)
[   37.003959] CPU: Physical Processor ID: 0
[   37.003960] CPU: Processor Core ID: 1
[   37.004041] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   37.004029] Brought up 2 CPUs
[   37.004487] net_namespace: 120 bytes
[   37.004718] NET: Registered protocol family 16
[   37.004831] ACPI: bus type pci registered
[   37.004913] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   37.004952] PCI: Not using MMCONFIG.
[   37.004989] PCI: Using configuration type 1
[   37.007230] ACPI: EC: Look up EC in DSDT
[   37.010681] ACPI: Interpreter enabled
[   37.010719] ACPI: (supports S0 S1 S3 S4 S5)
[   37.010888] ACPI: Using IOAPIC for interrupt routing
[   37.011098] Error attaching device data
[   37.011137] Error attaching device data
[   37.011176] Error attaching device data
[   37.011214] Error attaching device data
[   37.016127] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   37.016652] PCI: Transparent bridge - 0000:00:08.0
[   37.016946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   37.017078] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   37.017175] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   37.017230] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   37.017285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   37.017340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   37.021278] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   37.021614] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   37.021948] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[   37.022309] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[   37.022668] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[   37.023028] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   37.023362] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[   37.023721] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   37.024058] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   37.024392] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[   37.024752] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   37.025087] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[   37.025447] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[   37.025807] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   37.026141] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[   37.026502] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   37.026836] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[   37.027233] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[   37.027594] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[   37.027955] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[   37.028273] Linux Plug and Play Support v0.97 (c) Adam Belay
[   37.028326] pnp: PnP ACPI init
[   37.028365] ACPI: bus type pnp registered
[   37.030905] pnp: PnP ACPI: found 13 devices
[   37.030943] ACPI: ACPI bus type pnp unregistered
[   37.031065] SCSI subsystem initialized
[   37.031122] libata version 3.00 loaded.
[   37.031172] usbcore: registered new interface driver usbfs
[   37.031227] usbcore: registered new interface driver hub
[   37.031284] usbcore: registered new device driver usb
[   37.031367] PCI: Using ACPI for IRQ routing
[   37.031405] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   37.040479] PCI-DMA: Disabling AGP.
[   37.041215] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   37.041257] PCI-DMA: using GART IOMMU.
[   37.041296] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   37.041455] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   37.041595] hpet0: 3 32-bit timers, 25000000 Hz
[   37.043764] Time: hpet clocksource has been installed.
[   37.043812] Switched to high resolution mode on CPU 0
[   37.043970] Switched to high resolution mode on CPU 1
[   37.050495] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   37.050535] system 00:05: ioport range 0x800-0x80f has been reserved
[   37.050575] system 00:05: ioport range 0x2000-0x207f has been reserved
[   37.050614] system 00:05: ioport range 0x2080-0x20ff has been reserved
[   37.054014] system 00:05: ioport range 0x2400-0x247f has been reserved
[   37.054053] system 00:05: ioport range 0x2480-0x24ff has been reserved
[   37.054092] system 00:05: ioport range 0x2800-0x287f has been reserved
[   37.054131] system 00:05: ioport range 0x2880-0x28ff has been reserved
[   37.054171] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   37.054210] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[   37.054250] system 00:05: iomem range 0x0-0x0 could not be reserved
[   37.054290] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[   37.054333] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[   37.054381] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[   37.054432] system 00:0a: ioport range 0x290-0x29f has been reserved
[   37.054474] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[   37.054519] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   37.054558] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   37.054601] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   37.054641] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[   37.054688] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
[   37.054970] PCI: Bridge: 0000:00:08.0
[   37.055007]   IO window: d000-dfff
[   37.055044]   MEM window: f9f00000-f9ffffff
[   37.055081]   PREFETCH window: disabled.
[   37.055119] PCI: Bridge: 0000:00:0b.0
[   37.055155]   IO window: c000-cfff
[   37.055192]   MEM window: f9e00000-f9efffff
[   37.055229]   PREFETCH window: disabled.
[   37.055266] PCI: Bridge: 0000:00:0c.0
[   37.055302]   IO window: disabled.
[   37.055338]   MEM window: disabled.
[   37.055374]   PREFETCH window: disabled.
[   37.055411] PCI: Bridge: 0000:00:0d.0
[   37.055448]   IO window: e000-efff
[   37.055484]   MEM window: fa000000-febfffff
[   37.055521]   PREFETCH window: d0000000-dfffffff
[   37.055559] PCI: Bridge: 0000:00:0e.0
[   37.055595]   IO window: disabled.
[   37.055631]   MEM window: disabled.
[   37.055668]   PREFETCH window: disabled.
[   37.055711] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   37.055719] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   37.055724] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   37.055729] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   37.055733] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   37.055739] NET: Registered protocol family 2
[   37.087062] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   37.087659] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   37.089081] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   37.089567] TCP: Hash tables configured (established 262144 bind 65536)
[   37.089607] TCP reno registered
[   37.097846] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[   37.097949] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[   37.097997] io scheduler noop registered
[   37.098035] io scheduler cfq registered (default)
[   37.098731] Boot video device is 0000:04:00.0
[   37.098833] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   37.098850] assign_interrupt_mode Found MSI capability
[   37.098904] Allocate Port Service[0000:00:0b.0:pcie00]
[   37.098946] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   37.098962] assign_interrupt_mode Found MSI capability
[   37.099010] Allocate Port Service[0000:00:0c.0:pcie00]
[   37.099047] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   37.099063] assign_interrupt_mode Found MSI capability
[   37.099111] Allocate Port Service[0000:00:0d.0:pcie00]
[   37.099148] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   37.099164] assign_interrupt_mode Found MSI capability
[   37.099212] Allocate Port Service[0000:00:0e.0:pcie00]
[   37.099387] input: Power Button (FF) as /class/input/input0
[   37.099425] ACPI: Power Button (FF) [PWRF]
[   37.099510] input: Power Button (CM) as /class/input/input1
[   37.099549] ACPI: Power Button (CM) [PWRB]
[   37.099683] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   37.099788] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   37.123685] Real Time Clock Driver v1.12ac
[   37.123804] hpet_resources: 0xfed00000 is busy
[   37.123821] Linux agpgart interface v0.102
[   37.123907] Driver 'sd' needs updating - please use bus_type methods
[   37.123980] ahci 0000:00:0a.0: version 3.0
[   37.124155] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   37.124199] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[   37.124533] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[   38.124731] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[   38.124780] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio 
[   38.124819] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   38.125020] scsi0 : ahci
[   38.125116] scsi1 : ahci
[   38.125182] scsi2 : ahci
[   38.125248] scsi3 : ahci
[   38.125337] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315
[   38.125384] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315
[   38.125432] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315
[   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315
[   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48 
[   38.598405] ata1.00: configured for UDMA/133
[   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   39.086268] ata2.00: configured for UDMA/133
[   39.405277] ata3: SATA link down (SStatus 0 SControl 300)
[   39.724583] ata4: SATA link down (SStatus 0 SControl 300)
[   39.724672] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
[   39.724782] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   39.724826] sd 0:0:0:0: [sda] Write Protect is off
[   39.724864] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   39.724872] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   39.724942] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   39.724985] sd 0:0:0:0: [sda] Write Protect is off
[   39.725023] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   39.725030] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   39.725079]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   39.763787] sd 0:0:0:0: [sda] Attached SCSI disk
[   39.763923] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[   39.764032] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   39.764077] sd 1:0:0:0: [sdb] Write Protect is off
[   39.764115] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   39.764124] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   39.764194] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   39.764237] sd 1:0:0:0: [sdb] Write Protect is off
[   39.764275] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   39.764283] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   39.764332]  sdb: sdb1 sdb2
[   39.793043] sd 1:0:0:0: [sdb] Attached SCSI disk
[   39.793181] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   39.795761] serio: i8042 KBD port at 0x60,0x64 irq 1
[   39.795800] serio: i8042 AUX port at 0x60,0x64 irq 12
[   39.822033] usbcore: registered new interface driver usbhid
[   39.822072] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   39.822116] TCP cubic registered
[   39.822155] NET: Registered protocol family 1
[   39.822210] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   39.822187] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   39.822226] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   39.822265] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   39.822303] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   39.822341] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   39.822379] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   39.822417] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   39.822456] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   39.848293] input: AT Translated Set 2 keyboard as /class/input/input2
[   39.942989] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[   39.943032] ReiserFS: sda3: using ordered data mode
[   39.952565] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   39.953453] ReiserFS: sda3: checking transaction log (sda3)
[   39.996872] ReiserFS: sda3: Using r5 hash to sort names
[   39.996923] VFS: Mounted root (reiserfs filesystem) readonly.
[   39.996972] Freeing unused kernel memory: 176k freed
[   40.878988] Clocksource tsc unstable (delta = -333079246 ns)
[   42.095345] ReiserFS: sda3: switching to journaled data mode
[   42.226791] r8169 Gigabit Ethernet driver 2.2LK loaded
[   42.226996] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   42.227002] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[   42.227010] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   42.227158] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 314
[   42.239735] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   42.239745] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[   42.239894] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   42.239897] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   42.239970] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   42.239992] ehci_hcd 0000:00:02.1: debug port 1
[   42.239994] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   42.240001] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   42.243080] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   42.243150] usb usb1: configuration #1 chosen from 1 choice
[   42.243165] hub 1-0:1.0: USB hub found
[   42.243170] hub 1-0:1.0: 10 ports detected
[   42.352456] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   42.394298] usb 1-3: configuration #1 chosen from 1 choice
[   42.394382] hub 1-3:1.0: USB hub found
[   42.394494] hub 1-3:1.0: 4 ports detected
[   42.398785] reiser4: sdb2: found disk format 4.0.0.
[   42.493443] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[   42.527871] usb 1-3.1: configuration #1 chosen from 1 choice
[   42.531596] input: Logitech USB Receiver as /class/input/input3
[   42.536888] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   42.539011] input: Logitech USB Receiver as /class/input/input4
[   42.552418] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   42.561737] mice: PS/2 mouse device common for all mice
[   50.915448] reiser4: sda6: found disk format 4.0.0.
[   51.353992] reiser4: sdb1: found disk format 4.0.0.
[   51.733762] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[   53.133822] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   53.133828] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[   53.134923] Audigy2 value: Special config.
[   54.973693] w83627ehf: Found W83627EHG chip at 0x290
[   55.827810] r8169: eth0: link up
[   55.827816] r8169: eth0: link up
[   56.557555] NET: Registered protocol family 17

[-- Attachment #3: dmesg_2.6.24.3reiser4ahci_no_srst_reboot --]
[-- Type: text/plain, Size: 24676 bytes --]

[    0.000000] Linux version 2.6.24.3reiser4ahci_no_srst (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Mar 19 07:57:35 CET 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 853 pages reserved
[    0.000000]   DMA zone: 3090 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030522
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   39.090700] Marking TSC unstable due to TSCs unsynchronized
[   39.090702] time.c: Detected 3013.888 MHz processor.
[   39.094534] Console: colour VGA+ 80x25
[   39.094536] console [tty6] enabled
[   39.099146] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   39.101376] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[   39.102148] Checking aperture...
[   39.102186] CPU 0: aperture @ 8000000 size 32 MB
[   39.102223] Aperture too small (32 MB)
[   39.108105] No AGP bridge found
[   39.108140] Your BIOS doesn't leave a aperture memory hole
[   39.108178] Please enable the IOMMU option in the BIOS setup
[   39.108216] This costs you 64 MB of RAM
[   39.133445] Mapping aperture over 65536 KB of RAM @ 8000000
[   39.157576] Memory: 4049948k/4980736k available (2192k kernel code, 143428k reserved, 681k data, 176k init)
[   39.157645] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   39.240351] Calibrating delay using timer specific routine.. 6034.68 BogoMIPS (lpj=10053897)
[   39.240444] Mount-cache hash table entries: 256
[   39.240551] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   39.240591] CPU: L2 Cache: 1024K (64 bytes/line)
[   39.240629] CPU: Physical Processor ID: 0
[   39.240665] CPU: Processor Core ID: 0
[   39.240718] SMP alternatives: switching to UP code
[   39.241081] ACPI: Core revision 20070126
[   39.276257] Using local APIC timer interrupts.
[   39.309401] APIC timer calibration result 12557874
[   39.309402] Detected 12.557 MHz APIC timer.
[   39.309488] SMP alternatives: switching to SMP code
[   39.309718] Booting processor 1/2 APIC 0x1
[   39.319858] Initializing CPU#1
[   39.402621] Calibrating delay using timer specific routine.. 6030.92 BogoMIPS (lpj=10046282)
[   39.402626] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   39.402627] CPU: L2 Cache: 1024K (64 bytes/line)
[   39.402629] CPU: Physical Processor ID: 0
[   39.402630] CPU: Processor Core ID: 1
[   39.402711] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   39.402745] Brought up 2 CPUs
[   39.403204] net_namespace: 120 bytes
[   39.403436] NET: Registered protocol family 16
[   39.403548] ACPI: bus type pci registered
[   39.403630] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   39.403669] PCI: Not using MMCONFIG.
[   39.403705] PCI: Using configuration type 1
[   39.405948] ACPI: EC: Look up EC in DSDT
[   39.409394] ACPI: Interpreter enabled
[   39.409432] ACPI: (supports S0 S1 S3 S4 S5)
[   39.409602] ACPI: Using IOAPIC for interrupt routing
[   39.409811] Error attaching device data
[   39.409850] Error attaching device data
[   39.409889] Error attaching device data
[   39.409928] Error attaching device data
[   39.414841] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   39.415367] PCI: Transparent bridge - 0000:00:08.0
[   39.415661] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   39.415792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   39.415889] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   39.415944] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   39.415999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   39.416055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   39.419993] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   39.420329] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   39.420664] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[   39.421026] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[   39.421386] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[   39.421746] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   39.422081] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[   39.422441] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   39.422778] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   39.423113] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[   39.423474] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   39.423808] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[   39.424169] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[   39.424529] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   39.424864] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[   39.425225] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   39.425560] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[   39.425958] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[   39.426318] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[   39.426679] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[   39.426998] Linux Plug and Play Support v0.97 (c) Adam Belay
[   39.427051] pnp: PnP ACPI init
[   39.427090] ACPI: bus type pnp registered
[   39.429629] pnp: PnP ACPI: found 13 devices
[   39.429666] ACPI: ACPI bus type pnp unregistered
[   39.429789] SCSI subsystem initialized
[   39.429845] libata version 3.00 loaded.
[   39.429896] usbcore: registered new interface driver usbfs
[   39.429952] usbcore: registered new interface driver hub
[   39.430009] usbcore: registered new device driver usb
[   39.430092] PCI: Using ACPI for IRQ routing
[   39.430130] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   39.439195] PCI-DMA: Disabling AGP.
[   39.439931] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   39.439973] PCI-DMA: using GART IOMMU.
[   39.440013] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   39.440171] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   39.440311] hpet0: 3 32-bit timers, 25000000 Hz
[   39.442480] Time: hpet clocksource has been installed.
[   39.442528] Switched to high resolution mode on CPU 0
[   39.442640] Switched to high resolution mode on CPU 1
[   39.449212] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   39.449252] system 00:05: ioport range 0x800-0x80f has been reserved
[   39.449291] system 00:05: ioport range 0x2000-0x207f has been reserved
[   39.449331] system 00:05: ioport range 0x2080-0x20ff has been reserved
[   39.452732] system 00:05: ioport range 0x2400-0x247f has been reserved
[   39.452772] system 00:05: ioport range 0x2480-0x24ff has been reserved
[   39.452811] system 00:05: ioport range 0x2800-0x287f has been reserved
[   39.452850] system 00:05: ioport range 0x2880-0x28ff has been reserved
[   39.452890] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   39.452929] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[   39.452969] system 00:05: iomem range 0x0-0x0 could not be reserved
[   39.453009] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[   39.453053] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[   39.453100] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[   39.453151] system 00:0a: ioport range 0x290-0x29f has been reserved
[   39.453193] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[   39.453238] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   39.453278] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   39.453321] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   39.453361] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[   39.453408] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
[   39.453690] PCI: Bridge: 0000:00:08.0
[   39.453728]   IO window: d000-dfff
[   39.453765]   MEM window: f9f00000-f9ffffff
[   39.453802]   PREFETCH window: disabled.
[   39.453840] PCI: Bridge: 0000:00:0b.0
[   39.453876]   IO window: c000-cfff
[   39.453913]   MEM window: f9e00000-f9efffff
[   39.453950]   PREFETCH window: disabled.
[   39.453987] PCI: Bridge: 0000:00:0c.0
[   39.454023]   IO window: disabled.
[   39.454060]   MEM window: disabled.
[   39.454096]   PREFETCH window: disabled.
[   39.454133] PCI: Bridge: 0000:00:0d.0
[   39.454170]   IO window: e000-efff
[   39.454206]   MEM window: fa000000-febfffff
[   39.454243]   PREFETCH window: d0000000-dfffffff
[   39.454281] PCI: Bridge: 0000:00:0e.0
[   39.454317]   IO window: disabled.
[   39.454354]   MEM window: disabled.
[   39.454390]   PREFETCH window: disabled.
[   39.454433] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   39.454441] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   39.454446] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   39.454451] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   39.454456] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   39.454462] NET: Registered protocol family 2
[   39.485778] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[   39.486375] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[   39.487800] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   39.488284] TCP: Hash tables configured (established 262144 bind 65536)
[   39.488324] TCP reno registered
[   39.496560] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[   39.496664] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[   39.496712] io scheduler noop registered
[   39.496750] io scheduler cfq registered (default)
[   39.497446] Boot video device is 0000:04:00.0
[   39.497548] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   39.497565] assign_interrupt_mode Found MSI capability
[   39.497619] Allocate Port Service[0000:00:0b.0:pcie00]
[   39.497661] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   39.497677] assign_interrupt_mode Found MSI capability
[   39.497725] Allocate Port Service[0000:00:0c.0:pcie00]
[   39.497762] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   39.497778] assign_interrupt_mode Found MSI capability
[   39.497826] Allocate Port Service[0000:00:0d.0:pcie00]
[   39.497864] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   39.497880] assign_interrupt_mode Found MSI capability
[   39.497928] Allocate Port Service[0000:00:0e.0:pcie00]
[   39.498102] input: Power Button (FF) as /class/input/input0
[   39.498141] ACPI: Power Button (FF) [PWRF]
[   39.498226] input: Power Button (CM) as /class/input/input1
[   39.498264] ACPI: Power Button (CM) [PWRB]
[   39.498398] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   39.498503] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
[   39.522401] Real Time Clock Driver v1.12ac
[   39.522520] hpet_resources: 0xfed00000 is busy
[   39.522537] Linux agpgart interface v0.102
[   39.522623] Driver 'sd' needs updating - please use bus_type methods
[   39.522696] ahci 0000:00:0a.0: version 3.0
[   39.522871] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   39.522914] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[   39.523247] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
[   40.523447] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[   40.523496] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio 
[   40.523535] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   40.523737] scsi0 : ahci
[   40.523832] scsi1 : ahci
[   40.523898] scsi2 : ahci
[   40.523964] scsi3 : ahci
[   40.524053] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315
[   40.524100] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315
[   40.524148] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315
[   40.524195] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315
[   40.995751] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   40.996374] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   40.996416] ata1.00: 312581808 sectors, multi 16: LBA48 
[   40.997049] ata1.00: configured for UDMA/133
[   41.468058] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   41.471873] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   41.471913] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   41.473917] ata2.00: configured for UDMA/133
[   41.790689] ata3: SATA link down (SStatus 0 SControl 300)
[   42.109995] ata4: SATA link down (SStatus 0 SControl 300)
[   42.110084] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
[   42.110194] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   42.110238] sd 0:0:0:0: [sda] Write Protect is off
[   42.110276] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   42.110284] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   42.110354] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[   42.110397] sd 0:0:0:0: [sda] Write Protect is off
[   42.110435] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   42.110442] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   42.110492]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   42.140153] sd 0:0:0:0: [sda] Attached SCSI disk
[   42.140289] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[   42.140398] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   42.140443] sd 1:0:0:0: [sdb] Write Protect is off
[   42.140481] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   42.140489] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   42.140559] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   42.140602] sd 1:0:0:0: [sdb] Write Protect is off
[   42.140639] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   42.140647] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   42.140696]  sdb: sdb1 sdb2
[   42.167607] sd 1:0:0:0: [sdb] Attached SCSI disk
[   42.167745] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   42.170531] serio: i8042 KBD port at 0x60,0x64 irq 1
[   42.170571] serio: i8042 AUX port at 0x60,0x64 irq 12
[   42.197421] usbcore: registered new interface driver usbhid
[   42.197459] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   42.197504] TCP cubic registered
[   42.197543] NET: Registered protocol family 1
[   42.197597] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[   42.197621] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   42.197660] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   42.197699] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   42.197737] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   42.197775] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   42.197813] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   42.197851] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   42.197890] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   42.224668] input: AT Translated Set 2 keyboard as /class/input/input2
[   42.319352] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[   42.319395] ReiserFS: sda3: using ordered data mode
[   42.328929] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[   42.329817] ReiserFS: sda3: checking transaction log (sda3)
[   42.373235] ReiserFS: sda3: Using r5 hash to sort names
[   42.373286] VFS: Mounted root (reiserfs filesystem) readonly.
[   42.373335] Freeing unused kernel memory: 176k freed
[   43.277704] Clocksource tsc unstable (delta = -333079178 ns)
[   44.475534] ReiserFS: sda3: switching to journaled data mode
[   44.609715] r8169 Gigabit Ethernet driver 2.2LK loaded
[   44.609920] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   44.609925] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[   44.609934] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   44.610080] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 314
[   44.628294] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   44.628300] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[   44.628468] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   44.628472] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   44.628547] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[   44.628568] ehci_hcd 0000:00:02.1: debug port 1
[   44.628571] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[   44.628576] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   44.637353] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   44.637437] usb usb1: configuration #1 chosen from 1 choice
[   44.637453] hub 1-0:1.0: USB hub found
[   44.637459] hub 1-0:1.0: 10 ports detected
[   44.746738] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   44.788570] usb 1-3: configuration #1 chosen from 1 choice
[   44.788654] hub 1-3:1.0: USB hub found
[   44.788766] hub 1-3:1.0: 4 ports detected
[   44.792882] reiser4: sdb2: found disk format 4.0.0.
[   44.887964] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[   44.922094] usb 1-3.1: configuration #1 chosen from 1 choice
[   44.925824] input: Logitech USB Receiver as /class/input/input3
[   44.932248] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   44.934322] input: Logitech USB Receiver as /class/input/input4
[   44.949978] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   44.958863] mice: PS/2 mouse device common for all mice
[   53.303908] reiser4: sda6: found disk format 4.0.0.
[   53.750119] reiser4: sdb1: found disk format 4.0.0.
[   54.136067] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[   55.658007] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   55.658013] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[   55.659102] Audigy2 value: Special config.
[   57.257005] w83627ehf: Found W83627EHG chip at 0x290
[   58.250017] r8169: eth0: link up
[   58.250023] r8169: eth0: link up
[   58.784830] NET: Registered protocol family 17

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-19  7:53                 ` Volker Armin Hemmann
@ 2008-03-19  8:58                   ` Tejun Heo
  2008-03-19 10:08                     ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Tejun Heo @ 2008-03-19  8:58 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide

Volker Armin Hemmann wrote:
> 
> [   37.123980] ahci 0000:00:0a.0: version 3.0
> [   37.124155] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
> [   37.124199] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
> (level, low) -> IRQ 23
> [   37.124533] ahci 0000:00:0a.0: controller can't do PMP, turning off CAP_PMP
> [   38.124731] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
> impl IDE mode
> [   38.124780] ahci 0000:00:0a.0: flags: 64bit sntf led clo pio
> [   38.124819] PCI: Setting latency timer of device 0000:00:0a.0 to 64
> [   38.125020] scsi0 : ahci
> [   38.125116] scsi1 : ahci
> [   38.125182] scsi2 : ahci
> [   38.125248] scsi3 : ahci
> [   38.125337] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
> irq 315
> [   38.125384] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
> irq 315
> [   38.125432] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
> irq 315
> [   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
> irq 315
> [   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
> [   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
> [   38.598405] ata1.00: configured for UDMA/133
> [   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
> [   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [   39.086268] ata2.00: configured for UDMA/133

So, just to confirm.  With the updated patch, you don't see any problem,
right?

-- 
tejun

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-19  8:58                   ` Tejun Heo
@ 2008-03-19 10:08                     ` Volker Armin Hemmann
  2008-03-19 11:43                       ` Tejun Heo
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-03-19 10:08 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide

On Mittwoch, 19. März 2008, Tejun Heo wrote:
> x UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200
>
> > irq 315
> > [   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port
> > 0xf9dfc280 irq 315
> > [   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > [   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max
> > UDMA/133 [   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
> > [   38.598405] ata1.00: configured for UDMA/133
> > [   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> > [   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
> > [   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
> > 0/32) [   39.086268] ata2.00: configured for UDMA/133
>
> So, just to confirm.  With the updated patch, you don't see any problem,
> right?

Correct. With the updated patch I don't see problems in 'non-raid' mode. AHCI 
mode still has problems without nosmi. But that is an entirely different 
problem, right?

Glück Auf,
Volker

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-19 10:08                     ` Volker Armin Hemmann
@ 2008-03-19 11:43                       ` Tejun Heo
  2008-03-19 13:55                         ` Volker Armin Hemmann
  2008-03-27 16:40                         ` Volker Armin Hemmann
  0 siblings, 2 replies; 52+ messages in thread
From: Tejun Heo @ 2008-03-19 11:43 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide

Volker Armin Hemmann wrote:
> On Mittwoch, 19. März 2008, Tejun Heo wrote:
>> x UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200
>>
>>> irq 315
>>> [   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port
>>> 0xf9dfc280 irq 315
>>> [   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>> [   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max
>>> UDMA/133 [   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
>>> [   38.598405] ata1.00: configured for UDMA/133
>>> [   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>> [   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
>>> [   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
>>> 0/32) [   39.086268] ata2.00: configured for UDMA/133
>> So, just to confirm.  With the updated patch, you don't see any problem,
>> right?
> 
> Correct. With the updated patch I don't see problems in 'non-raid' mode. AHCI 
> mode still has problems without nosmi. But that is an entirely different 
> problem, right?

Yeap, can you please post the result of "lspci -nn"?

-- 
tejun

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-19 11:43                       ` Tejun Heo
@ 2008-03-19 13:55                         ` Volker Armin Hemmann
  2008-04-02  3:57                           ` Tejun Heo
  2008-03-27 16:40                         ` Volker Armin Hemmann
  1 sibling, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-03-19 13:55 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide

[-- Attachment #1: Type: text/plain, Size: 5782 bytes --]

On Mittwoch, 19. März 2008, Tejun Heo wrote:
> Volker Armin Hemmann wrote:
> > On Mittwoch, 19. März 2008, Tejun Heo wrote:
> >> x UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200
> >>
> >>> irq 315
> >>> [   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port
> >>> 0xf9dfc280 irq 315
> >>> [   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >>> [   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max
> >>> UDMA/133 [   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
> >>> [   38.598405] ata1.00: configured for UDMA/133
> >>> [   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >>> [   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
> >>> [   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
> >>> 0/32) [   39.086268] ata2.00: configured for UDMA/133
> >>
> >> So, just to confirm.  With the updated patch, you don't see any problem,
> >> right?
> >
> > Correct. With the updated patch I don't see problems in 'non-raid' mode.
> > AHCI mode still has problems without nosmi. But that is an entirely
> > different problem, right?
>
> Yeap, can you please post the result of "lspci -nn"?

with AHCI+nosmi, 2.6.24.3:
lspci -nn
00:00.0 RAM memory [0500]: nVidia Corporation MCP65 Memory Controller 
[10de:0444] (rev a1)
00:01.0 ISA bridge [0601]: nVidia Corporation MCP65 LPC Bridge [10de:0441] 
(rev a2)
00:01.1 SMBus [0c05]: nVidia Corporation MCP65 SMBus [10de:0446] (rev a1)
00:01.2 RAM memory [0500]: nVidia Corporation MCP65 Memory Controller 
[10de:0445] (rev a1)
00:02.0 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller 
[10de:0454] (rev a1)
00:02.1 USB Controller [0c03]: nVidia Corporation MCP65 USB Controller 
[10de:0455] (rev a1)
00:08.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI bridge [10de:0449] 
(rev a1)
00:09.0 IDE interface [0101]: nVidia Corporation MCP65 IDE [10de:0448] (rev 
a1)
00:0a.0 SATA controller [0106]: nVidia Corporation MCP65 AHCI Controller 
[10de:044d] (rev a1)
00:0b.0 PCI bridge [0604]: nVidia Corporation Unknown device [10de:045b] (rev 
a1)
00:0c.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge 
[10de:045a] (rev a1)
00:0d.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge 
[10de:0458] (rev a1)
00:0e.0 PCI bridge [0604]: nVidia Corporation MCP65 PCI Express bridge 
[10de:0459] (rev a1)
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control [1022:1103]
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
02:08.0 SCSI storage controller [0100]: Adaptec AHA-2944UW / AIC-7884U 
[9004:8478] (rev 01)
02:09.0 Multimedia audio controller [0401]: Creative Labs SB0400 Audigy2 Value 
[1102:0008]
04:00.0 VGA compatible controller [0300]: nVidia Corporation Unknown device 
[10de:0402] (rev a1)

I booted into systemrescuecd (which is the easiest way to get the error and be 
able to safe the stuff) - lspci is of course identical, but /proc/interrupts 
is not.

2.6.24.3:
cat /proc/interrupts
           CPU0       CPU1
  0:         57          1   IO-APIC-edge      timer
  1:          1        544   IO-APIC-edge      i8042
  8:          0          1   IO-APIC-edge      rtc
  9:          0          1   IO-APIC-fasteoi   acpi
 12:          0          3   IO-APIC-edge      i8042
 17:         22      21598   IO-APIC-fasteoi   nvidia
 18:          0          0   IO-APIC-fasteoi   EMU10K1
 19:          5       1132   IO-APIC-fasteoi   eth0
 22:         30      21627   IO-APIC-fasteoi   ehci_hcd:usb1
 23:         29      23078   IO-APIC-fasteoi   ahci
NMI:          0          0   Non-maskable interrupts
LOC:      41299      60204   Local timer interrupts
RES:      14872      22506   Rescheduling interrupts
CAL:       1783        173   function call interrupts
TLB:       2668       2406   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
SPU:          0          0   Spurious interrupts
ERR:          0

systemrescuecd's rescue64 kernel:
           CPU0       CPU1       
  0:        148          1   IO-APIC-edge      timer
  1:          0        946   IO-APIC-edge      i8042
  8:          0         25   IO-APIC-edge      rtc
  9:          0          1   IO-APIC-fasteoi   acpi
 12:          0          4   IO-APIC-edge      i8042
 14:          0          0   IO-APIC-edge      libata
 15:          0          0   IO-APIC-edge      libata
 18:          0         16   IO-APIC-fasteoi   aic7xxx
 21:          0          0   IO-APIC-fasteoi   ohci_hcd:usb2
 22:          2       8158   IO-APIC-fasteoi   ehci_hcd:usb1
1274:          0          0   PCI-MSI-edge      ahci
1275:          0        453   PCI-MSI-edge      eth0
NMI:          0          0   Non-maskable interrupts
LOC:      16082      18972   Local timer interrupts
RES:       7042       6008   Rescheduling interrupts
CAL:         48         45   function call interrupts
TLB:       1836       1843   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
SPU:          0          0   Spurious interrupts
ERR:          6

dmesg of this is attached.

Glück Auf,
Volker

[-- Attachment #2: dmesg_rescue64 --]
[-- Type: text/plain, Size: 26505 bytes --]

Linux version 2.6.24.02-fd13-amd64 (root@gentoo64) (gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) #1 SMP Mon Feb 18 20:54:15 UTC 2008
Command line: initrd=initram.igz video=ofonly vga=0 BOOT_IMAGE=rescue64 setkmap=de
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
 BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
 BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
 BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
 BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 851888) 1 entries of 256 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
end_pfn_map = 1245184
DMI present.
ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
ACPI: FACS CFFC0000, 0040
ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
Entering add_active_range(0, 0, 159) 0 entries of 256 used
Entering add_active_range(0, 256, 851888) 1 entries of 256 used
Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
No mptable found.
Zone PFN ranges:
  DMA             0 ->     4096
  DMA32        4096 ->  1048576
  Normal    1048576 ->  1245184
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    0:        0 ->      159
    0:      256 ->   851888
    0:  1048576 ->  1245184
On node 0 totalpages: 1048399
  DMA zone: 56 pages used for memmap
  DMA zone: 2588 pages reserved
  DMA zone: 1355 pages, LIFO batch:0
  DMA32 zone: 14280 pages used for memmap
  DMA32 zone: 833512 pages, LIFO batch:31
  Normal zone: 2688 pages used for memmap
  Normal zone: 193920 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x2008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x10de8201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 38072 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1028787
Kernel command line: initrd=initram.igz video=ofonly vga=0 BOOT_IMAGE=rescue64 setkmap=de
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
hpet clockevent registered
TSC calibrated against HPET
Marking TSC unstable due to TSCs unsynchronized
time.c: Detected 3013.888 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ 8000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 8000000
Memory: 4036864k/4980736k available (5710k kernel code, 156184k reserved, 3445k data, 272k init)
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
Calibrating delay using timer specific routine.. 6032.11 BogoMIPS (lpj=3016058)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12557875
Detected 12.557 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 6027.45 BogoMIPS (lpj=3013726)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
Brought up 2 CPUs
sizeof(vma)=168 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=208 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=224 bytes
sizeof(task_struct)=2176 bytes
CPU0 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000001 00000002
CPU1 attaching sched-domain:
 domain 0: span 00000003
  groups: 00000002 00000001
khelper used greatest stack depth: 6808 bytes left
net_namespace: 120 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
khelper used greatest stack depth: 6536 bytes left
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S5)
ACPI: Using IOAPIC for interrupt routing
Error attaching device data
Error attaching device data
Error attaching device data
Error attaching device data
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:08.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 8000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
hpet0: 3 32-bit timers, 25000000 Hz
Time: hpet clocksource has been installed.
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
system 00:05: ioport range 0x4d0-0x4d1 has been reserved
system 00:05: ioport range 0x800-0x80f has been reserved
system 00:05: ioport range 0x2000-0x207f has been reserved
system 00:05: ioport range 0x2080-0x20ff has been reserved
system 00:05: ioport range 0x2400-0x247f has been reserved
system 00:05: ioport range 0x2480-0x24ff has been reserved
system 00:05: ioport range 0x2800-0x287f has been reserved
system 00:05: ioport range 0x2880-0x28ff has been reserved
system 00:05: ioport range 0x2c00-0x2c7f has been reserved
system 00:05: ioport range 0x2c80-0x2cff has been reserved
system 00:05: iomem range 0x0-0x0 could not be reserved
system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0a: ioport range 0x290-0x29f has been reserved
system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff has been reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
PCI: Bridge: 0000:00:08.0
  IO window: d000-dfff
  MEM window: f9f00000-f9ffffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0b.0
  IO window: c000-cfff
  MEM window: f9e00000-f9efffff
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0c.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
  IO window: e000-efff
  MEM window: fa000000-febfffff
  PREFETCH window: d0000000-dfffffff
PCI: Bridge: 0000:00:0e.0
  IO window: disabled.
  MEM window: disabled.
  PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
PCI: Setting latency timer of device 0000:00:0c.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 5461k freed
audit: initializing netlink socket (disabled)
audit(1205937134.550:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Loading Reiser4. See www.namesys.com for a description of Reiser4.
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
NTFS driver 2.1.29 [Flags: R/O].
fuse init (API version 7.9)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:04:00.0
PCI: Setting latency timer of device 0000:00:0b.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0b.0:pcie00]
PCI: Setting latency timer of device 0000:00:0c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0c.0:pcie00]
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
loop: AES key scrubbing enabled
loop: loaded (max 8 devices)
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.14)
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 1.1.18
ixgbe: Copyright (c) 1999-2007 Intel Corporation.
Intel(R) PRO/10GbE Network Driver - version 1.0.126-k2-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Atheros(R) L2 Ethernet Driver - version 2.0.4
Copyright (c) 2007 Atheros Corporation.
tehuti: Tehuti Networks(R) Network Driver, 7.29.3
tehuti: Options: hw_csum 
pcnet32.c:v1.34-NAPI 14.Aug.2007 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
Silan SC92031 PCI Fast Ethernet Adapter driver 2.0c
r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:01:00.0 to 64
eth0: RTL8168b/8111b at 0xffffc20000028000, 00:19:66:47:f3:cb, XID 38000000 IRQ 1275
myri10ge: Version 1.3.2-1.287
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-e (2.4 port) Sep-11-2006  Donald Becker <becker@scyld.com>
  http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
input: Macintosh mouse button emulation as /class/input/input0
Loading iSCSI transport class v2.0-724.
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 18
scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
        <Adaptec 2944 Ultra SCSI adapter>
        aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs

Adaptec aacraid driver 1.1-5[2449]-ms
PCI: Unable to reserve mem region #2:1000@f9fff000 for device 0000:02:08.0
aic7xxx: <Adaptec AHA-2944 Ultra SCSI host adapter> at PCI 2/8/0
aic7xxx: I/O ports already in use, ignoring.
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
QLogic Fibre Channel HBA Driver
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.2
Copyright(c) 2004-2007 Emulex.  All rights reserved.
DC390: clustering now enabled by default. If you get problems load
	with "disable_clustering=1" and report to maintainers
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.010.
RocketRAID 3xxx SATA Controller driver v1.2 (070830)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
ahci 0000:00:0a.0: version 3.0
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
PCI: Setting latency timer of device 0000:00:0a.0 to 64
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 1274
ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 1274
ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 1274
ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 1274
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 00(40)
scsi_scan_0 used greatest stack depth: 6296 bytes left
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 40(40)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 40(40)
ata1.00: qc timeout (cmd 0xec)
ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata1: failed to recover some devices, retrying in 5 secs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 40(40)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: failed to recover some devices, retrying in 5 secs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 40(40)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: failed to recover some devices, retrying in 5 secs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
APIC error on CPU0: 40(40)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: failed to recover some devices, retrying in 5 secs
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
pata_amd 0000:00:09.0: version 0.3.10
PCI: Setting latency timer of device 0000:00:09.0 to 64
scsi5 : pata_amd
scsi6 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata6: port disabled. ignoring.
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
Fusion MPT FC Host driver 3.04.06
Fusion MPT SAS Host driver 3.04.06
Fusion MPT misc device (ioctl) driver 3.04.06
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
Fusion MPT LAN driver 3.04.06
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 21, io mem 0xf9dff000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
USB Universal Host Controller Interface driver v3.0
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usb 1-3: new high speed USB device using ehci_hcd and address 2
usb 1-3: configuration #1 chosen from 1 choice
hub 1-3:1.0: USB hub found
hub 1-3:1.0: 4 ports detected
usb 1-3.1: new low speed USB device using ehci_hcd and address 3
usb 1-3.1: configuration #1 chosen from 1 choice
usb 1-3.4: new high speed USB device using ehci_hcd and address 4
usb 1-3.4: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1
input: Logitech USB Receiver as /class/input/input3
input,hiddev96: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
registered taskstats version 1
Freeing unused kernel memory: 272k freed
Write protecting the kernel read-only data: 2320k
mount used greatest stack depth: 6112 bytes left
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
xor: automatically using best checksumming function: generic_sse
   generic_sse:  9264.000 MB/sec
xor: using function: generic_sse (9264.000 MB/sec)
async_tx: api initialized (sync-only)
raid6: int64x1   2746 MB/s
raid6: int64x2   3542 MB/s
raid6: int64x4   3410 MB/s
raid6: int64x8   2457 MB/s
raid6: sse2x1    4222 MB/s
raid6: sse2x2    5554 MB/s
raid6: sse2x4    5664 MB/s
raid6: using algorithm sse2x4 (5664 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
JFS: nTxBlock = 8192, nTxLock = 65536
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
usb-storage: device scan complete
scsi 7:0:0:0: CD-ROM            _NEC     DVD_RW ND-3500AG 2.19 PQ: 0 ANSI: 0
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 7:0:0:0: Attached scsi CD-ROM sr0
sr 7:0:0:0: Attached scsi generic sg0 type 5
mount used greatest stack depth: 4408 bytes left
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
mount used greatest stack depth: 4376 bytes left
input: PC Speaker as /class/input/input4
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input6
ACPI: Power Button (CM) [PWRB]
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
r8169: eth0: link up
r8169: eth0: link up
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNED] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:04:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.19  Wed Sep 12 14:08:38 PDT 2007
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
usb 1-3.2: new high speed USB device using ehci_hcd and address 5
usb 1-3.2: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 8:0:0:0: Direct-Access     Generic  IC1210        CF 1.9C PQ: 0 ANSI: 0 CCS
scsi 8:0:0:1: Direct-Access     Generic  IC1210        MS 1.9C PQ: 0 ANSI: 0 CCS
scsi 8:0:0:2: Direct-Access     Generic  IC1210    MMC/SD 1.9C PQ: 0 ANSI: 0 CCS
scsi 8:0:0:3: Direct-Access     Generic  IC1210        SM 1.9C PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: [sda] Attached SCSI removable disk
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:1: [sdb] Attached SCSI removable disk
sd 8:0:0:1: Attached scsi generic sg2 type 0
sd 8:0:0:2: [sdc] 122624 512-byte hardware sectors (63 MB)
sd 8:0:0:2: [sdc] Write Protect is off
sd 8:0:0:2: [sdc] Mode Sense: 4b 00 00 08
sd 8:0:0:2: [sdc] Assuming drive cache: write through
sd 8:0:0:2: [sdc] 122624 512-byte hardware sectors (63 MB)
sd 8:0:0:2: [sdc] Write Protect is off
sd 8:0:0:2: [sdc] Mode Sense: 4b 00 00 08
sd 8:0:0:2: [sdc] Assuming drive cache: write through
 sdc: sdc1
sd 8:0:0:2: [sdc] Attached SCSI removable disk
sd 8:0:0:2: Attached scsi generic sg3 type 0
sd 8:0:0:3: [sdd] Attached SCSI removable disk
sd 8:0:0:3: Attached scsi generic sg4 type 0

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-19 11:43                       ` Tejun Heo
  2008-03-19 13:55                         ` Volker Armin Hemmann
@ 2008-03-27 16:40                         ` Volker Armin Hemmann
  1 sibling, 0 replies; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-03-27 16:40 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide

[-- Attachment #1: Type: text/plain, Size: 8554 bytes --]

Hi,

I tried 2.6.25-rc7 and there are some changes.

Bad news first.
With AHCI in bios I get this:
[    0.363838] ------------[ cut here ]------------
[    0.363838] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a()
[    0.363838] Modules linked in:
[    0.363838] Pid: 1, comm: swapper Not tainted 2.6.25-rc7 #3
[    0.363838]
[    0.363838] Call Trace:
[    0.363838]  [<ffffffff8022c545>] warn_on_slowpath+0x51/0x63
[    0.363838]  [<ffffffff80220061>] __ioremap+0x8/0x197
[    0.363838]  [<ffffffff8038e218>] pci_conf1_read+0xb2/0xbd
[    0.363841]  [<ffffffff802f3076>] pcim_iomap_release+0x0/0x2c
[    0.363880]  [<ffffffff802f3076>] pcim_iomap_release+0x0/0x2c
[    0.363920]  [<ffffffff80346ca1>] devres_find+0x4b/0x65
[    0.363959]  [<ffffffff8036a405>] ahci_init_one+0x190/0xa3a
[    0.363998]  [<ffffffff802af91f>] sysfs_addrm_finish+0x1d/0x209
[    0.364038]  [<ffffffff80283f98>] ifind+0x34/0x8d
[    0.364076]  [<ffffffff802af636>] sysfs_find_dirent+0x1b/0x2f
[    0.364115]  [<ffffffff802eb4c5>] ida_get_new_above+0xf0/0x180
[    0.364154]  [<ffffffff802af91f>] sysfs_addrm_finish+0x1d/0x209
[    0.364194]  [<ffffffff802b0458>] sysfs_create_link+0xb6/0x102
[    0.364234]  [<ffffffff802f83c4>] pci_device_probe+0x4c/0x72
[    0.364273]  [<ffffffff80344874>] driver_probe_device+0xb5/0x132
[    0.364312]  [<ffffffff80344a07>] __driver_attach+0x6f/0xaf
[    0.364350]  [<ffffffff80344998>] __driver_attach+0x0/0xaf
[    0.364389]  [<ffffffff80344998>] __driver_attach+0x0/0xaf
[    0.364429]  [<ffffffff80343c82>] bus_for_each_dev+0x44/0x6f
[    0.364468]  [<ffffffff803444a0>] bus_add_driver+0xae/0x1f6
[    0.364507]  [<ffffffff80344c36>] driver_register+0x59/0xce
[    0.364546]  [<ffffffff802f8605>] __pci_register_driver+0x4a/0x7d
[    0.364587]  [<ffffffff804dd6b8>] kernel_init+0x14f/0x2b9
[    0.364626]  [<ffffffff8020be98>] child_rip+0xa/0x12
[    0.364670]  [<ffffffff804dd569>] kernel_init+0x0/0x2b9
[    0.364709]  [<ffffffff8020be8e>] child_rip+0x0/0x12
[    0.364746]
[    0.364783] ---[ end trace 1d94b6d2f6a54ae4 ]---
[    1.370499] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
imp
l SATA mode
[    1.370499] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[    1.370499] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.370501] scsi0 : ahci
[    1.370509] scsi1 : ahci
[    1.370517] scsi2 : ahci
[    1.370526] scsi3 : ahci
[    1.370532] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq
 23
[    1.370532] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq
 23
[    1.370532] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq
 23
[    1.370532] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq
 23
[    1.801113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.801617] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[    1.801617] ata1.00: 312581808 sectors, multi 16: LBA48
[    1.802150] ata1.00: configured for UDMA/133
[    2.434072] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.447930] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[    2.447930] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.449834] ata2.00: configured for UDMA/133
[    2.767054] ata3: SATA link down (SStatus 0 SControl 300)
[    3.086918] ata4: SATA link down (SStatus 0 SControl 300)
[    3.290523] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ
: 0 ANSI: 5
[    3.290535] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[    3.290535] sd 0:0:0:0: [sda] Write Protect is off
[    3.290535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.290535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.290535] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[    3.290535] sd 0:0:0:0: [sda] Write Protect is off
[    3.290535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.290535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.290535]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.122431] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.122593] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ
: 0 ANSI: 5
[    3.122721] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[    3.122768] sd 1:0:0:0: [sdb] Write Protect is off
[    3.122806] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.122820] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.122900] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[    3.122946] sd 1:0:0:0: [sdb] Write Protect is off
[    3.122984] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.122998] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.123047]  sdb: sdb1 sdb2
[    3.148928] sd 1:0:0:0: [sdb] Attached SCSI disk

with nomsi. Without nomsi drives are still not found. Evil or not, it looks 
scary ;) 

dmesg&config is attached.

Now the good ones. With non-raid set in bios box boots cleanly without hang:

[    0.360492] Driver 'sd' needs updating - please use bus_type methods
[    0.360498] ahci 0000:00:0a.0: version 3.0
[    0.360498] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.360498] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[    1.363826] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[    1.363826] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[    1.363826] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.363828] scsi0 : ahci
[    1.363836] scsi1 : ahci
[    1.363844] scsi2 : ahci
[    1.363851] scsi3 : ahci
[    1.363857] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[    1.363857] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[    1.363857] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[    1.363857] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[    1.794371] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.794871] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[    1.794871] ata1.00: 312581808 sectors, multi 16: LBA48
[    1.795403] ata1.00: configured for UDMA/133
[    2.427327] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.447811] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[    2.447811] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.449717] ata2.00: configured for UDMA/133
[    2.766980] ata3: SATA link down (SStatus 0 SControl 300)
[    3.086847] ata4: SATA link down (SStatus 0 SControl 300)
[    3.290513] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[    3.290525] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[    3.290525] sd 0:0:0:0: [sda] Write Protect is off
[    3.290525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.290525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    3.290525] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[    3.290525] sd 0:0:0:0: [sda] Write Protect is off
[    3.290525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.290525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    3.290525]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.123110] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.123121] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[    3.123131] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[    3.123131] sd 1:0:0:0: [sdb] Write Protect is off
[    3.123131] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.123131] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    3.123131] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[    3.123131] sd 1:0:0:0: [sdb] Write Protect is off
[    3.123131] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.123131] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    3.123131]  sdb: sdb1 sdb2
[    3.127056] sd 1:0:0:0: [sdb] Attached SCSI disk

again, dmesg is attached.

Glück Auf,
Volker

[-- Attachment #2: dmesg_2.6.25_rc7 --]
[-- Type: text/plain, Size: 30897 bytes --]

[    0.000000] Linux version 2.6.25-rc7 (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #3 SMP Thu Mar 27 17:12:28 CET 2008
[    0.000000] Command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] early res: 0 [0-fff] BIOS data page
[    0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[    0.000000] early res: 2 [200000-546193] TEXT DATA BSS
[    0.000000] early res: 3 [9fc00-a0bff] EBDA
[    0.000000] early res: 4 [8000-dfff] PGTABLE
[    0.000000] No mptable found.
[    0.000000]  [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[    0.000000]  [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[    0.000000]  [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[    0.000000]  [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[    0.000000]  [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[    0.000000]  [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[    0.000000]  [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[    0.000000]  [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[    0.000000]  [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[    0.000000]  [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[    0.000000]  [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[    0.000000]  [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[    0.000000]  [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[    0.000000]  [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[    0.000000]  [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[    0.000000]  [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[    0.000000]  [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[    0.000000]  [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[    0.000000]  [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[    0.000000]  [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[    0.000000]  [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
[    0.000000]  [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
[    0.000000]  [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
[    0.000000]  [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
[    0.000000]  [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
[    0.000000]  [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0
[    0.000000]  [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0
[    0.000000]  [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0
[    0.000000]  [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0
[    0.000000]  [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0
[    0.000000]  [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0
[    0.000000]  [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0
[    0.000000]  [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0
[    0.000000]  [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 848 pages reserved
[    0.000000]   DMA zone: 3095 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffc0000
[    0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cfff0000
[    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff380000
[    0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 32584 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030527
[    0.000000] Kernel command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.000002] time.c: Detected 3013.889 MHz processor.
[    0.000011] spurious 8259A interrupt: IRQ7.
[    0.003333] Console: colour VGA+ 80x25
[    0.003333] console [tty6] enabled
[    0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003333] Checking aperture...
[    0.003333] Node 0: aperture @ 8000000 size 32 MB
[    0.003333] Aperture pointing to e820 RAM. Ignoring.
[    0.003333] No AGP bridge found
[    0.003333] Your BIOS doesn't leave a aperture memory hole
[    0.003333] Please enable the IOMMU option in the BIOS setup
[    0.003333] This costs you 64 MB of RAM
[    0.003333] Mapping aperture over 65536 KB of RAM @ c000000
[    0.003333] PM: Registered nosave memory: 000000000c000000 - 0000000010000000
[    0.003333] Memory: 4047784k/4980736k available (1978k kernel code, 145104k reserved, 856k data, 192k init)
[    0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[    0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[    0.003333] hpet clockevent registered
[    0.083330] Calibrating delay using timer specific routine.. 6034.73 BogoMIPS (lpj=10053970)
[    0.083419] Mount-cache hash table entries: 256
[    0.083537] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.083577] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.083615] CPU: Physical Processor ID: 0
[    0.083651] CPU: Processor Core ID: 0
[    0.083700] ACPI: Core revision 20070126
[    0.122295] Using local APIC timer interrupts.
[    0.123326] APIC timer calibration result 12557872
[    0.123327] Detected 12.557 MHz APIC timer.
[    0.123430] Booting processor 1/2 APIC 0x1
[    0.003333] Initializing CPU#1
[    0.003333] Calibrating delay using timer specific routine.. 6030.95 BogoMIPS (lpj=10046334)
[    0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.003333] CPU: Physical Processor ID: 0
[    0.003333] CPU: Processor Core ID: 1
[    0.003333] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[    0.216840] Brought up 2 CPUs
[    0.217286] net_namespace: 296 bytes
[    0.217402] NET: Registered protocol family 16
[    0.217496] No dock devices found.
[    0.217559] ACPI: bus type pci registered
[    0.217638] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[    0.217677] PCI: Not using MMCONFIG.
[    0.217713] PCI: Using configuration type 1
[    0.220689] ACPI: EC: Look up EC in DSDT
[    0.224824] ACPI: Interpreter enabled
[    0.224861] ACPI: (supports S0 S1 S3 S4 S5)
[    0.225032] ACPI: Using IOAPIC for interrupt routing
[    0.225203] ACPI: Error attaching device data
[    0.225243] ACPI: Error attaching device data
[    0.225282] ACPI: Error attaching device data
[    0.225322] ACPI: Error attaching device data
[    0.230926] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.231439] PCI: Transparent bridge - 0000:00:08.0
[    0.231690] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.231832] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.231946] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.232008] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.232072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[    0.232136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.236396] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[    0.236955] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[    0.237309] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.237690] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.238070] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.238450] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[    0.238804] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.239184] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.239538] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.239892] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[    0.240284] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[    0.240638] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[    0.241019] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[    0.241399] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.241753] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.242133] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[    0.242487] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[    0.242892] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.243273] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[    0.243669] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[    0.243997] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.244045] pnp: PnP ACPI init
[    0.244084] ACPI: bus type pnp registered
[    0.247188] pnp: PnP ACPI: found 13 devices
[    0.247225] ACPI: ACPI bus type pnp unregistered
[    0.247332] SCSI subsystem initialized
[    0.247405] libata version 3.00 loaded.
[    0.247444] usbcore: registered new interface driver usbfs
[    0.247495] usbcore: registered new interface driver hub
[    0.247551] usbcore: registered new device driver usb
[    0.247631] PCI: Using ACPI for IRQ routing
[    0.247668] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.266652] PCI-DMA: Disabling AGP.
[    0.266652] PCI-DMA: aperture base @ c000000 size 65536 KB
[    0.266652] PCI-DMA: using GART IOMMU.
[    0.266652] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.266652] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.266652] hpet0: 3 32-bit timers, 25000000 Hz
[    0.266661] Switched to high resolution mode on CPU 0
[    0.056683] Switched to high resolution mode on CPU 1
[    0.280018] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[    0.280018] system 00:05: ioport range 0x800-0x80f has been reserved
[    0.280018] system 00:05: ioport range 0x2000-0x207f has been reserved
[    0.280018] system 00:05: ioport range 0x2080-0x20ff has been reserved
[    0.280018] system 00:05: ioport range 0x2400-0x247f has been reserved
[    0.280018] system 00:05: ioport range 0x2480-0x24ff has been reserved
[    0.280018] system 00:05: ioport range 0x2800-0x287f has been reserved
[    0.280018] system 00:05: ioport range 0x2880-0x28ff has been reserved
[    0.280021] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[    0.280060] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[    0.280100] system 00:05: iomem range 0x0-0x0 could not be reserved
[    0.280140] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.280190] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.280238] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.280289] system 00:0a: ioport range 0x290-0x29f has been reserved
[    0.280332] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.280376] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.280415] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[    0.280455] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.280499] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[    0.280546] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
[    0.281003] PCI: Bridge: 0000:00:08.0
[    0.281041]   IO window: d000-dfff
[    0.281078]   MEM window: 0xf9f00000-0xf9ffffff
[    0.281116]   PREFETCH window: disabled.
[    0.281155] PCI: Bridge: 0000:00:0b.0
[    0.281191]   IO window: c000-cfff
[    0.281228]   MEM window: 0xf9e00000-0xf9efffff
[    0.281265]   PREFETCH window: disabled.
[    0.281303] PCI: Bridge: 0000:00:0c.0
[    0.281339]   IO window: disabled.
[    0.281376]   MEM window: disabled.
[    0.281413]   PREFETCH window: disabled.
[    0.281450] PCI: Bridge: 0000:00:0d.0
[    0.281487]   IO window: e000-efff
[    0.281524]   MEM window: 0xfa000000-0xfebfffff
[    0.281562]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[    0.281602] PCI: Bridge: 0000:00:0e.0
[    0.281638]   IO window: disabled.
[    0.281675]   MEM window: disabled.
[    0.281711]   PREFETCH window: disabled.
[    0.281754] PCI: Setting latency timer of device 0000:00:08.0 to 64
[    0.281763] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.281768] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.281773] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.281778] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.281785] NET: Registered protocol family 2
[    0.316683] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.316683] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.316683] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.316683] TCP: Hash tables configured (established 262144 bind 65536)
[    0.316683] TCP reno registered
[    0.326992] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.326992] io scheduler noop registered
[    0.326992] io scheduler cfq registered (default)
[    0.326992] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.326992] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.326992] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.326992] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    0.326992] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    0.326992] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    0.326992] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.326992] pci 0000:04:00.0: Boot video device
[    0.327000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.327000] assign_interrupt_mode Found MSI capability
[    0.327000] Allocate Port Service[0000:00:0b.0:pcie00]
[    0.327006] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.327006] assign_interrupt_mode Found MSI capability
[    0.327006] Allocate Port Service[0000:00:0c.0:pcie00]
[    0.327012] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.327012] assign_interrupt_mode Found MSI capability
[    0.327012] Allocate Port Service[0000:00:0d.0:pcie00]
[    0.327018] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.327018] assign_interrupt_mode Found MSI capability
[    0.327018] Allocate Port Service[0000:00:0e.0:pcie00]
[    0.327056] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.327056] ACPI: Power Button (FF) [PWRF]
[    0.327062] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.327062] ACPI: Power Button (CM) [PWRB]
[    0.327094] ACPI: ACPI0007:00 is registered as cooling_device0
[    0.327100] ACPI: ACPI0007:01 is registered as cooling_device1
[    0.363802] Real Time Clock Driver v1.12ac
[    0.363806] hpet_resources: 0xfed00000 is busy
[    0.363813] Linux agpgart interface v0.103
[    0.363832] Driver 'sd' needs updating - please use bus_type methods
[    0.363838] ahci 0000:00:0a.0: version 3.0
[    0.363838] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.363838] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[    0.363838] ------------[ cut here ]------------
[    0.363838] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a()
[    0.363838] Modules linked in:
[    0.363838] Pid: 1, comm: swapper Not tainted 2.6.25-rc7 #3
[    0.363838] 
[    0.363838] Call Trace:
[    0.363838]  [<ffffffff8022c545>] warn_on_slowpath+0x51/0x63
[    0.363838]  [<ffffffff80220061>] __ioremap+0x8/0x197
[    0.363838]  [<ffffffff8038e218>] pci_conf1_read+0xb2/0xbd
[    0.363841]  [<ffffffff802f3076>] pcim_iomap_release+0x0/0x2c
[    0.363880]  [<ffffffff802f3076>] pcim_iomap_release+0x0/0x2c
[    0.363920]  [<ffffffff80346ca1>] devres_find+0x4b/0x65
[    0.363959]  [<ffffffff8036a405>] ahci_init_one+0x190/0xa3a
[    0.363998]  [<ffffffff802af91f>] sysfs_addrm_finish+0x1d/0x209
[    0.364038]  [<ffffffff80283f98>] ifind+0x34/0x8d
[    0.364076]  [<ffffffff802af636>] sysfs_find_dirent+0x1b/0x2f
[    0.364115]  [<ffffffff802eb4c5>] ida_get_new_above+0xf0/0x180
[    0.364154]  [<ffffffff802af91f>] sysfs_addrm_finish+0x1d/0x209
[    0.364194]  [<ffffffff802b0458>] sysfs_create_link+0xb6/0x102
[    0.364234]  [<ffffffff802f83c4>] pci_device_probe+0x4c/0x72
[    0.364273]  [<ffffffff80344874>] driver_probe_device+0xb5/0x132
[    0.364312]  [<ffffffff80344a07>] __driver_attach+0x6f/0xaf
[    0.364350]  [<ffffffff80344998>] __driver_attach+0x0/0xaf
[    0.364389]  [<ffffffff80344998>] __driver_attach+0x0/0xaf
[    0.364429]  [<ffffffff80343c82>] bus_for_each_dev+0x44/0x6f
[    0.364468]  [<ffffffff803444a0>] bus_add_driver+0xae/0x1f6
[    0.364507]  [<ffffffff80344c36>] driver_register+0x59/0xce
[    0.364546]  [<ffffffff802f8605>] __pci_register_driver+0x4a/0x7d
[    0.364587]  [<ffffffff804dd6b8>] kernel_init+0x14f/0x2b9
[    0.364626]  [<ffffffff8020be98>] child_rip+0xa/0x12
[    0.364670]  [<ffffffff804dd569>] kernel_init+0x0/0x2b9
[    0.364709]  [<ffffffff8020be8e>] child_rip+0x0/0x12
[    0.364746] 
[    0.364783] ---[ end trace 1d94b6d2f6a54ae4 ]---
[    1.370499] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[    1.370499] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[    1.370499] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.370501] scsi0 : ahci
[    1.370509] scsi1 : ahci
[    1.370517] scsi2 : ahci
[    1.370526] scsi3 : ahci
[    1.370532] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 23
[    1.370532] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 23
[    1.370532] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 23
[    1.370532] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 23
[    1.801113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.801617] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[    1.801617] ata1.00: 312581808 sectors, multi 16: LBA48 
[    1.802150] ata1.00: configured for UDMA/133
[    2.434072] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.447930] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[    2.447930] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.449834] ata2.00: configured for UDMA/133
[    2.767054] ata3: SATA link down (SStatus 0 SControl 300)
[    3.086918] ata4: SATA link down (SStatus 0 SControl 300)
[    3.290523] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
[    3.290535] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    3.290535] sd 0:0:0:0: [sda] Write Protect is off
[    3.290535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.290535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.290535] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    3.290535] sd 0:0:0:0: [sda] Write Protect is off
[    3.290535] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.290535] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.290535]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.122431] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.122593] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[    3.122721] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[    3.122768] sd 1:0:0:0: [sdb] Write Protect is off
[    3.122806] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.122820] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.122900] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[    3.122946] sd 1:0:0:0: [sdb] Write Protect is off
[    3.122984] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.122998] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.123047]  sdb: sdb1 sdb2
[    3.148928] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.148943] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    3.149040] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.149040] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.179062] usbcore: registered new interface driver usbhid
[    3.179062] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    3.179062] TCP cubic registered
[    3.179062] NET: Registered protocol family 1
[    3.179068] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[    3.378698] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[    3.378698] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[    3.378698] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[    3.378698] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[    3.378698] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[    3.378698] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[    3.378698] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[    3.378698] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[    3.211155] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    3.310804] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[    3.310804] ReiserFS: sda3: using ordered data mode
[    3.323573] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    3.327318] ReiserFS: sda3: checking transaction log (sda3)
[    3.370161] ReiserFS: sda3: Using r5 hash to sort names
[    3.370161] VFS: Mounted root (reiserfs filesystem) readonly.
[    3.370161] Freeing unused kernel memory: 192k freed
[    4.060449] Clocksource tsc unstable (delta = -150866427 ns)
[    8.503418] ReiserFS: sda3: switching to journaled data mode
[    8.884405] r8169 Gigabit Ethernet driver 2.2LK loaded
[    8.884634] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[    8.884639] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[    8.884648] PCI: Setting latency timer of device 0000:01:00.0 to 64
[    8.884657] r8169 0000:01:00.0: no MSI. Back to INTx.
[    8.887277] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 19
[    8.934245] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    8.934250] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[    8.934258] PCI: Setting latency timer of device 0000:00:02.1 to 64
[    8.934260] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    8.934332] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    8.934354] ehci_hcd 0000:00:02.1: debug port 1
[    8.934356] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[    8.934363] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[    8.946541] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    8.946618] usb usb1: configuration #1 chosen from 1 choice
[    8.946633] hub 1-0:1.0: USB hub found
[    8.946639] hub 1-0:1.0: 10 ports detected
[    9.057663] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.057663] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.057663] usb usb1: Product: EHCI Host Controller
[    9.057663] usb usb1: Manufacturer: Linux 2.6.25-rc7 ehci_hcd
[    9.057663] usb usb1: SerialNumber: 0000:00:02.1
[    9.355067] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    9.450447] usb 1-3: configuration #1 chosen from 1 choice
[    9.450649] hub 1-3:1.0: USB hub found
[    9.457951] hub 1-3:1.0: 4 ports detected
[    9.575226] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
[    9.575228] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    9.575230] usb 1-3: Product: USB2.0 Hub
[    9.611453] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[    9.774119] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[    9.877429] usb 1-3.1: configuration #1 chosen from 1 choice
[    9.894606] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.1/1-3.1:1.0/input/input3
[   10.307344] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   10.314064] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.1/1-3.1:1.1/input/input4
[   10.390680] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   10.390712] usb 1-3.1: New USB device found, idVendor=046d, idProduct=c518
[   10.390714] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   10.390716] usb 1-3.1: Product: USB Receiver
[   10.390717] usb 1-3.1: Manufacturer: Logitech
[   10.434028] mice: PS/2 mouse device common for all mice
[   13.292848] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   13.292848] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[   13.294716] Audigy2 value: Special config.
[   15.801564] w83627ehf: Found W83627EHG chip at 0x290
[   17.536775] r8169: eth0: link up
[   17.536781] r8169: eth0: link up
[   18.784515] NET: Registered protocol family 17

[-- Attachment #3: dmesg_2.6.25_rc7_non_raid --]
[-- Type: text/plain, Size: 28857 bytes --]

[    0.000000] Linux version 2.6.25-rc7 (root@energy) (gcc version 4.2.3 (Gentoo 4.2.3 p1.0)) #3 SMP Thu Mar 27 17:12:28 CET 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] early res: 0 [0-fff] BIOS data page
[    0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[    0.000000] early res: 2 [200000-546193] TEXT DATA BSS
[    0.000000] early res: 3 [9fc00-a0bff] EBDA
[    0.000000] early res: 4 [8000-dfff] PGTABLE
[    0.000000] No mptable found.
[    0.000000]  [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0
[    0.000000]  [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0
[    0.000000]  [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0
[    0.000000]  [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0
[    0.000000]  [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0
[    0.000000]  [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0
[    0.000000]  [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0
[    0.000000]  [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0
[    0.000000]  [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0
[    0.000000]  [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0
[    0.000000]  [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0
[    0.000000]  [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0
[    0.000000]  [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0
[    0.000000]  [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0
[    0.000000]  [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0
[    0.000000]  [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0
[    0.000000]  [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0
[    0.000000]  [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0
[    0.000000]  [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0
[    0.000000]  [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0
[    0.000000]  [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0
[    0.000000]  [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0
[    0.000000]  [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0
[    0.000000]  [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0
[    0.000000]  [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0
[    0.000000]  [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on node 0
[    0.000000]  [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on node 0
[    0.000000]  [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on node 0
[    0.000000]  [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on node 0
[    0.000000]  [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on node 0
[    0.000000]  [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on node 0
[    0.000000]  [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on node 0
[    0.000000]  [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on node 0
[    0.000000]  [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 848 pages reserved
[    0.000000]   DMA zone: 3095 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffc0000
[    0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cfff0000
[    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff380000
[    0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 32584 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030527
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000001] Marking TSC unstable due to TSCs unsynchronized
[    0.000002] time.c: Detected 3013.892 MHz processor.
[    0.000011] spurious 8259A interrupt: IRQ7.
[    0.003333] Console: colour VGA+ 80x25
[    0.003333] console [tty6] enabled
[    0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.003333] Checking aperture...
[    0.003333] Node 0: aperture @ c000000 size 32 MB
[    0.003333] Aperture pointing to e820 RAM. Ignoring.
[    0.003333] No AGP bridge found
[    0.003333] Your BIOS doesn't leave a aperture memory hole
[    0.003333] Please enable the IOMMU option in the BIOS setup
[    0.003333] This costs you 64 MB of RAM
[    0.003333] Mapping aperture over 65536 KB of RAM @ c000000
[    0.003333] PM: Registered nosave memory: 000000000c000000 - 0000000010000000
[    0.003333] Memory: 4047784k/4980736k available (1978k kernel code, 145104k reserved, 856k data, 192k init)
[    0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[    0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[    0.003333] hpet clockevent registered
[    0.083330] Calibrating delay using timer specific routine.. 6034.71 BogoMIPS (lpj=10053948)
[    0.083419] Mount-cache hash table entries: 256
[    0.083538] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.083577] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.083615] CPU: Physical Processor ID: 0
[    0.083652] CPU: Processor Core ID: 0
[    0.083700] ACPI: Core revision 20070126
[    0.122294] Using local APIC timer interrupts.
[    0.123326] APIC timer calibration result 12557885
[    0.123327] Detected 12.557 MHz APIC timer.
[    0.123430] Booting processor 1/2 APIC 0x1
[    0.003333] Initializing CPU#1
[    0.003333] Calibrating delay using timer specific routine.. 6030.96 BogoMIPS (lpj=10046343)
[    0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.003333] CPU: Physical Processor ID: 0
[    0.003333] CPU: Processor Core ID: 1
[    0.003333] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[    0.216841] Brought up 2 CPUs
[    0.217286] net_namespace: 296 bytes
[    0.217401] NET: Registered protocol family 16
[    0.217495] No dock devices found.
[    0.217558] ACPI: bus type pci registered
[    0.217637] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[    0.217676] PCI: Not using MMCONFIG.
[    0.217712] PCI: Using configuration type 1
[    0.220688] ACPI: EC: Look up EC in DSDT
[    0.224821] ACPI: Interpreter enabled
[    0.224858] ACPI: (supports S0 S1 S3 S4 S5)
[    0.225029] ACPI: Using IOAPIC for interrupt routing
[    0.225199] ACPI: Error attaching device data
[    0.225238] ACPI: Error attaching device data
[    0.225278] ACPI: Error attaching device data
[    0.225317] ACPI: Error attaching device data
[    0.233318] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.233318] PCI: Transparent bridge - 0000:00:08.0
[    0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[    0.233318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.236692] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[    0.237049] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[    0.237403] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.237782] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.238162] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[    0.238541] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[    0.238895] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[    0.239274] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.239628] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.239991] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[    0.240371] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[    0.240724] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[    0.241103] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[    0.241483] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.241837] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[    0.242217] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[    0.242570] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[    0.242975] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.243364] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[    0.243745] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[    0.244072] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.244120] pnp: PnP ACPI init
[    0.244159] ACPI: bus type pnp registered
[    0.247240] pnp: PnP ACPI: found 13 devices
[    0.247278] ACPI: ACPI bus type pnp unregistered
[    0.247384] SCSI subsystem initialized
[    0.247458] libata version 3.00 loaded.
[    0.247497] usbcore: registered new interface driver usbfs
[    0.247547] usbcore: registered new interface driver hub
[    0.247602] usbcore: registered new device driver usb
[    0.247683] PCI: Using ACPI for IRQ routing
[    0.247720] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[    0.266663] PCI-DMA: Disabling AGP.
[    0.266663] PCI-DMA: aperture base @ c000000 size 65536 KB
[    0.266663] PCI-DMA: using GART IOMMU.
[    0.266663] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.266663] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.266663] hpet0: 3 32-bit timers, 25000000 Hz
[    0.266672] Switched to high resolution mode on CPU 0
[    0.056669] Switched to high resolution mode on CPU 1
[    0.280029] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[    0.280029] system 00:05: ioport range 0x800-0x80f has been reserved
[    0.280029] system 00:05: ioport range 0x2000-0x207f has been reserved
[    0.280029] system 00:05: ioport range 0x2080-0x20ff has been reserved
[    0.280029] system 00:05: ioport range 0x2400-0x247f has been reserved
[    0.280029] system 00:05: ioport range 0x2480-0x24ff has been reserved
[    0.280029] system 00:05: ioport range 0x2800-0x287f has been reserved
[    0.280029] system 00:05: ioport range 0x2880-0x28ff has been reserved
[    0.280029] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[    0.280029] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[    0.280029] system 00:05: iomem range 0x0-0x0 could not be reserved
[    0.280032] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.280079] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.280127] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[    0.280178] system 00:0a: ioport range 0x290-0x29f has been reserved
[    0.280221] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[    0.280264] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.280303] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[    0.280343] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.280388] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[    0.280435] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
[    0.280892] PCI: Bridge: 0000:00:08.0
[    0.280929]   IO window: d000-dfff
[    0.280966]   MEM window: 0xf9f00000-0xf9ffffff
[    0.281004]   PREFETCH window: disabled.
[    0.281043] PCI: Bridge: 0000:00:0b.0
[    0.281079]   IO window: c000-cfff
[    0.281116]   MEM window: 0xf9e00000-0xf9efffff
[    0.281153]   PREFETCH window: disabled.
[    0.281191] PCI: Bridge: 0000:00:0c.0
[    0.281227]   IO window: disabled.
[    0.281264]   MEM window: disabled.
[    0.281300]   PREFETCH window: disabled.
[    0.281338] PCI: Bridge: 0000:00:0d.0
[    0.281374]   IO window: e000-efff
[    0.281411]   MEM window: 0xfa000000-0xfebfffff
[    0.281449]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[    0.281488] PCI: Bridge: 0000:00:0e.0
[    0.281525]   IO window: disabled.
[    0.281561]   MEM window: disabled.
[    0.281598]   PREFETCH window: disabled.
[    0.281641] PCI: Setting latency timer of device 0000:00:08.0 to 64
[    0.281650] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.281655] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.281660] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.281665] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.281671] NET: Registered protocol family 2
[    0.316693] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.316693] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.316693] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.316693] TCP: Hash tables configured (established 262144 bind 65536)
[    0.316693] TCP reno registered
[    0.326990] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[    0.326990] io scheduler noop registered
[    0.326990] io scheduler cfq registered (default)
[    0.326990] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.326990] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.326990] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.326990] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    0.326990] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    0.326990] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    0.326990] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.326990] pci 0000:04:00.0: Boot video device
[    0.326998] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.326998] assign_interrupt_mode Found MSI capability
[    0.326998] Allocate Port Service[0000:00:0b.0:pcie00]
[    0.327005] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.327005] assign_interrupt_mode Found MSI capability
[    0.327005] Allocate Port Service[0000:00:0c.0:pcie00]
[    0.327011] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.327011] assign_interrupt_mode Found MSI capability
[    0.327011] Allocate Port Service[0000:00:0d.0:pcie00]
[    0.327017] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.327017] assign_interrupt_mode Found MSI capability
[    0.327017] Allocate Port Service[0000:00:0e.0:pcie00]
[    0.327055] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    0.327055] ACPI: Power Button (FF) [PWRF]
[    0.327061] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[    0.327061] ACPI: Power Button (CM) [PWRB]
[    0.327092] ACPI: ACPI0007:00 is registered as cooling_device0
[    0.327099] ACPI: ACPI0007:01 is registered as cooling_device1
[    0.360462] Real Time Clock Driver v1.12ac
[    0.360466] hpet_resources: 0xfed00000 is busy
[    0.360473] Linux agpgart interface v0.103
[    0.360492] Driver 'sd' needs updating - please use bus_type methods
[    0.360498] ahci 0000:00:0a.0: version 3.0
[    0.360498] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.360498] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[    1.363826] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[    1.363826] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[    1.363826] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.363828] scsi0 : ahci
[    1.363836] scsi1 : ahci
[    1.363844] scsi2 : ahci
[    1.363851] scsi3 : ahci
[    1.363857] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315
[    1.363857] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315
[    1.363857] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315
[    1.363857] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315
[    1.794371] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.794871] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[    1.794871] ata1.00: 312581808 sectors, multi 16: LBA48 
[    1.795403] ata1.00: configured for UDMA/133
[    2.427327] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.447811] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[    2.447811] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.449717] ata2.00: configured for UDMA/133
[    2.766980] ata3: SATA link down (SStatus 0 SControl 300)
[    3.086847] ata4: SATA link down (SStatus 0 SControl 300)
[    3.290513] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
[    3.290525] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    3.290525] sd 0:0:0:0: [sda] Write Protect is off
[    3.290525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.290525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.290525] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[    3.290525] sd 0:0:0:0: [sda] Write Protect is off
[    3.290525] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.290525] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.290525]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.123110] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.123121] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[    3.123131] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[    3.123131] sd 1:0:0:0: [sdb] Write Protect is off
[    3.123131] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.123131] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.123131] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[    3.123131] sd 1:0:0:0: [sdb] Write Protect is off
[    3.123131] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.123131] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.123131]  sdb: sdb1 sdb2
[    3.127056] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.127075] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    3.127908] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.127950] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.170517] usbcore: registered new interface driver usbhid
[    3.170517] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    3.170517] TCP cubic registered
[    3.170517] NET: Registered protocol family 1
[    3.170521] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[    3.371502] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[    3.371502] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[    3.371502] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[    3.371502] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[    3.371502] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[    3.371502] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[    3.371502] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[    3.371502] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[    3.200878] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
[    3.299367] ReiserFS: sda3: found reiserfs format "3.6" with standard journal
[    3.299367] ReiserFS: sda3: using ordered data mode
[    3.310974] ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    3.310974] ReiserFS: sda3: checking transaction log (sda3)
[    3.356310] ReiserFS: sda3: Using r5 hash to sort names
[    3.356310] VFS: Mounted root (reiserfs filesystem) readonly.
[    3.356310] Freeing unused kernel memory: 192k freed
[    4.194202] Clocksource tsc unstable (delta = -248646934 ns)
[    8.519617] ReiserFS: sda3: switching to journaled data mode
[    8.855926] r8169 Gigabit Ethernet driver 2.2LK loaded
[    8.855941] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[    8.855946] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[    8.855955] PCI: Setting latency timer of device 0000:01:00.0 to 64
[    8.856327] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, XID 38000000 IRQ 314
[    8.901477] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    8.901483] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[    8.901490] PCI: Setting latency timer of device 0000:00:02.1 to 64
[    8.901492] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    8.901566] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    8.901588] ehci_hcd 0000:00:02.1: debug port 1
[    8.901591] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[    8.901598] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[    8.914115] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    8.914194] usb usb1: configuration #1 chosen from 1 choice
[    8.914210] hub 1-0:1.0: USB hub found
[    8.914216] hub 1-0:1.0: 10 ports detected
[    9.024962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    9.024962] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    9.024962] usb usb1: Product: EHCI Host Controller
[    9.024962] usb usb1: Manufacturer: Linux 2.6.25-rc7 ehci_hcd
[    9.024962] usb usb1: SerialNumber: 0000:00:02.1
[    9.310790] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    9.412640] usb 1-3: configuration #1 chosen from 1 choice
[    9.412928] hub 1-3:1.0: USB hub found
[    9.413043] hub 1-3:1.0: 4 ports detected
[    9.532594] usb 1-3: New USB device found, idVendor=05e3, idProduct=0608
[    9.532596] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    9.532598] usb 1-3: Product: USB2.0 Hub
[    9.578589] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 across:1951888k
[    9.737370] usb 1-3.1: new low speed USB device using ehci_hcd and address 3
[    9.830710] usb 1-3.1: configuration #1 chosen from 1 choice
[    9.847857] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.1/1-3.1:1.0/input/input3
[   10.250586] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   10.257338] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:02.1/usb1/1-3/1-3.1/1-3.1:1.1/input/input4
[   10.329771] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-3.1
[   10.329805] usb 1-3.1: New USB device found, idVendor=046d, idProduct=c518
[   10.329807] usb 1-3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   10.329808] usb 1-3.1: Product: USB Receiver
[   10.329810] usb 1-3.1: Manufacturer: Logitech
[   10.413530] mice: PS/2 mouse device common for all mice
[   13.678751] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   13.678757] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[   13.682071] Audigy2 value: Special config.
[   17.567723] w83627ehf: Found W83627EHG chip at 0x290
[   18.825463] r8169: eth0: link up
[   18.866514] r8169: eth0: link up
[   20.054043] NET: Registered protocol family 17

[-- Attachment #4: .config --]
[-- Type: text/plain, Size: 40408 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc7
# Thu Mar 27 17:08:31 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_64_SMP=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_IOMMU_HELPER=y
CONFIG_SWIOTLB=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y

#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=16
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CORE=m
CONFIG_DVB_CORE_ATTACH=y
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_TDA10086 is not set

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set

#
# Tuners/PLL support
#
# CONFIG_DVB_PLL is not set
# CONFIG_DVB_TDA826X is not set
CONFIG_DVB_TDA827X=m
CONFIG_DVB_TDA18271=m
# CONFIG_DVB_TUNER_QT1010 is not set
# CONFIG_DVB_TUNER_MT2060 is not set
# CONFIG_DVB_TUNER_MT2266 is not set
# CONFIG_DVB_TUNER_MT2131 is not set
# CONFIG_DVB_TUNER_DIB0070 is not set
CONFIG_DVB_TUNER_XC5000=m

#
# Miscellaneous devices
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_TUA6100 is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_TUNER_CUSTOMIZE=y
CONFIG_TUNER_XC2028=m
CONFIG_TUNER_MT20XX=m
CONFIG_TUNER_TDA8290=m
CONFIG_TUNER_TEA5761=m
CONFIG_TUNER_TEA5767=m
CONFIG_TUNER_SIMPLE=m
CONFIG_TUNER_TDA9887=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# ALSA SoC audio for Freescale SOCs
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=850
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-15"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_X86_MPPARSE=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
# CONFIG_CRYPTO_SEQIV is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
# CONFIG_KVM_INTEL is not set
CONFIG_KVM_AMD=m
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-03-19 13:55                         ` Volker Armin Hemmann
@ 2008-04-02  3:57                           ` Tejun Heo
  2008-04-02 17:09                             ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Tejun Heo @ 2008-04-02  3:57 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide

[-- Attachment #1: Type: text/plain, Size: 2798 bytes --]

Volker Armin Hemmann wrote:
>On Mittwoch, 19. März 2008, Tejun Heo wrote:
>> Volker Armin Hemmann wrote:
>>> On Mittwoch, 19. März 2008, Tejun Heo wrote:
>>>> x UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200
>>>>
>>>>> irq 315
>>>>> [   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port
>>>>> 0xf9dfc280 irq 315
>>>>> [   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>>> [   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max
>>>>> UDMA/133 [   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
>>>>> [   38.598405] ata1.00: configured for UDMA/133
>>>>> [   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>>> [   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
>>>>> [   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
>>>>> 0/32) [   39.086268] ata2.00: configured for UDMA/133
>>>> So, just to confirm.  With the updated patch, you don't see any problem,
>>>> right?
>>> Correct. With the updated patch I don't see problems in 'non-raid' mode.
>>> AHCI mode still has problems without nosmi. But that is an entirely
>>> different problem, right?
>> Yeap, can you please post the result of "lspci -nn"?
> 
> with AHCI+nosmi, 2.6.24.3:
> 00:0a.0 SATA controller [0106]: nVidia Corporation MCP65 AHCI Controller 
> [10de:044d] (rev a1)

Sorry about the long delay.  Can you please test the attached patch in 
both ahci and non-ahci modes w/o pci=nomsi and post resulting boot logs?

> I booted into systemrescuecd (which is the easiest way to get the error and be 
> able to safe the stuff) - lspci is of course identical, but /proc/interrupts 
> is not.
> 
> 2.6.24.3:
> cat /proc/interrupts
>            CPU0       CPU1
>   0:         57          1   IO-APIC-edge      timer
>   1:          1        544   IO-APIC-edge      i8042
>   8:          0          1   IO-APIC-edge      rtc
>   9:          0          1   IO-APIC-fasteoi   acpi
>  12:          0          3   IO-APIC-edge      i8042
>  17:         22      21598   IO-APIC-fasteoi   nvidia
>  18:          0          0   IO-APIC-fasteoi   EMU10K1
>  19:          5       1132   IO-APIC-fasteoi   eth0
>  22:         30      21627   IO-APIC-fasteoi   ehci_hcd:usb1
>  23:         29      23078   IO-APIC-fasteoi   ahci
> NMI:          0          0   Non-maskable interrupts
> LOC:      41299      60204   Local timer interrupts
> RES:      14872      22506   Rescheduling interrupts
> CAL:       1783        173   function call interrupts
> TLB:       2668       2406   TLB shootdowns
> TRM:          0          0   Thermal event interrupts
> THR:          0          0   Threshold APIC interrupts
> SPU:          0          0   Spurious interrupts
> ERR:          0

Does the 2.6.24.3 kernel have MSI turned on?

Thanks.

-- 
tejun

[-- Attachment #2: mcp65-ahci-debug.patch --]
[-- Type: text/x-patch, Size: 1460 bytes --]

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 4851988..930fe22 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -7134,7 +7134,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 			ehi->probe_mask =
 				(1 << ata_link_max_devices(&ap->link)) - 1;
 			ehi->action |= ATA_EH_SOFTRESET;
-			ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
+			ehi->flags |= ATA_EHI_NO_AUTOPSY/* | ATA_EHI_QUIET*/;
 
 			ap->pflags &= ~ATA_PFLAG_INITIALIZING;
 			ap->pflags |= ATA_PFLAG_LOADING;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index a583032..bbf9273 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2190,6 +2190,8 @@ int ata_eh_reset(struct ata_link *link, int classify,
 		}
 	}
 
+	ehc->i.action |= ATA_EH_HARDRESET;
+
 	/* prereset() might have modified ehc->i.action */
 	if (ehc->i.action & ATA_EH_HARDRESET)
 		reset = hardreset;
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index e887aa4..a43be09 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1855,6 +1855,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM,
 			PCI_DEVICE_ID_TIGON3_5715S,
 			quirk_msi_intx_disable_bug);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x044d,
+			quirk_msi_intx_disable_bug);
 
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x4390,
 			quirk_msi_intx_disable_ati_bug);

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-02  3:57                           ` Tejun Heo
@ 2008-04-02 17:09                             ` Volker Armin Hemmann
  2008-04-03  1:48                               ` Tejun Heo
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-02 17:09 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide

On Mittwoch, 2. April 2008, Tejun Heo wrote:
> Volker Armin Hemmann wrote:
> >On Mittwoch, 19. März 2008, Tejun Heo wrote:
> >> Volker Armin Hemmann wrote:
> >>> On Mittwoch, 19. März 2008, Tejun Heo wrote:
> >>>> x UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200
> >>>>
> >>>>> irq 315
> >>>>> [   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port
> >>>>> 0xf9dfc280 irq 315
> >>>>> [   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >>>>> [   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max
> >>>>> UDMA/133 [   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
> >>>>> [   38.598405] ata1.00: configured for UDMA/133
> >>>>> [   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> >>>>> [   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
> >>>>> [   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
> >>>>> 0/32) [   39.086268] ata2.00: configured for UDMA/133
> >>>>
> >>>> So, just to confirm.  With the updated patch, you don't see any
> >>>> problem, right?
> >>>
> >>> Correct. With the updated patch I don't see problems in 'non-raid'
> >>> mode. AHCI mode still has problems without nosmi. But that is an
> >>> entirely different problem, right?
> >>
> >> Yeap, can you please post the result of "lspci -nn"?
> >
> > with AHCI+nosmi, 2.6.24.3:
> > 00:0a.0 SATA controller [0106]: nVidia Corporation MCP65 AHCI Controller
> > [10de:044d] (rev a1)
>
> Sorry about the long delay.  Can you please test the attached patch in
> both ahci and non-ahci modes w/o pci=nomsi and post resulting boot logs?

patch -p1 < /home/energyman/mcp65-ahci-debug.patch
patching file drivers/ata/libata-core.c
Hunk #1 succeeded at 7136 (offset 2 lines).
patching file drivers/ata/libata-eh.c
Hunk #1 succeeded at 2083 (offset -107 lines).
patching file drivers/pci/quirks.c
Hunk #1 succeeded at 1733 with fuzz 1 (offset -122 lines).

saved config, removed linux-2.6.24.3, unpacked 2.6.24.3 from tarball, reiser4 
and your patch, make oldconfig, make menuconfig, make all modules_install 
install.

dmesgs are below. 

>
> > I booted into systemrescuecd (which is the easiest way to get the error
> > and be able to safe the stuff) - lspci is of course identical, but
> > /proc/interrupts is not.
> >
> > 2.6.24.3:
> > cat /proc/interrupts
> >            CPU0       CPU1
> >   0:         57          1   IO-APIC-edge      timer
> >   1:          1        544   IO-APIC-edge      i8042
> >   8:          0          1   IO-APIC-edge      rtc
> >   9:          0          1   IO-APIC-fasteoi   acpi
> >  12:          0          3   IO-APIC-edge      i8042
> >  17:         22      21598   IO-APIC-fasteoi   nvidia
> >  18:          0          0   IO-APIC-fasteoi   EMU10K1
> >  19:          5       1132   IO-APIC-fasteoi   eth0
> >  22:         30      21627   IO-APIC-fasteoi   ehci_hcd:usb1
> >  23:         29      23078   IO-APIC-fasteoi   ahci
> > NMI:          0          0   Non-maskable interrupts
> > LOC:      41299      60204   Local timer interrupts
> > RES:      14872      22506   Rescheduling interrupts
> > CAL:       1783        173   function call interrupts
> > TLB:       2668       2406   TLB shootdowns
> > TRM:          0          0   Thermal event interrupts
> > THR:          0          0   Threshold APIC interrupts
> > SPU:          0          0   Spurious interrupts
> > ERR:          0
>
> Does the 2.6.24.3 kernel have MSI turned on?

I think so:

[*] PCI support                                                                                    
[*]   Support mmconfig PCI config space access                                                     
[ ] Support for DMA Remapping Devices (EXPERIMENTAL)                                               
[*] PCI Express support                                                                            
[*]   Root Port Advanced Error Reporting support                                                   
[*] Message Signaled Interrupts (MSI and MSI-X)                                                    
[*] Enable deprecated pci_find_* API                                                               
[*] Interrupts on hypertransport devices    

but to make sure,


non-raid, coldboot, pci=nomsi:
cat /proc/interrupts
           CPU0       CPU1
  0:         57          1   IO-APIC-edge      timer
  1:          2       3300   IO-APIC-edge      i8042
  8:          0          1   IO-APIC-edge      rtc
  9:          0          1   IO-APIC-fasteoi   acpi
 12:          0          3   IO-APIC-edge      i8042
 17:         17      43662   IO-APIC-fasteoi   nvidia
 18:          0          0   IO-APIC-fasteoi   EMU10K1
 19:         12       4188   IO-APIC-fasteoi   eth0
 22:         26      13832   IO-APIC-fasteoi   ehci_hcd:usb1
 23:         24      30517   IO-APIC-fasteoi   ahci
NMI:          0          0   Non-maskable interrupts
LOC:      86361     120679   Local timer interrupts
RES:      25603      12907   Rescheduling interrupts
CAL:       7294        260   function call interrupts
TLB:       4641       4579   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
SPU:          0          0   Spurious interrupts
ERR:          0

non-raid, coldboot without pci=nomsi:
cat /proc/interrupts
           CPU0       CPU1
  0:         57          1   IO-APIC-edge      timer
  1:          0        208   IO-APIC-edge      i8042
  8:          0          1   IO-APIC-edge      rtc
  9:          0          1   IO-APIC-fasteoi   acpi
 12:          0          3   IO-APIC-edge      i8042
 17:          2       5029   IO-APIC-fasteoi   nvidia
 18:          0          0   IO-APIC-fasteoi   EMU10K1
 22:          2       1439   IO-APIC-fasteoi   ehci_hcd:usb1
314:          4        594   PCI-MSI-edge      eth0
315:         15      15953   PCI-MSI-edge      ahci
NMI:          0          0   Non-maskable interrupts
LOC:      16704      18679   Local timer interrupts
RES:       5158       3043   Rescheduling interrupts
CAL:        672         86   function call interrupts
TLB:        508        572   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
SPU:          0          0   Spurious interrupts
ERR:          0


about the boots with your patch:

AHCI + nomsi:

[    0.000000] Linux version 2.6.24.3reiser4mcp65patch (root@energy) (gcc 
version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Apr 2 07:31:52 CEST 2008
[    0.000000] Command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 
console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       
97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       
97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 
20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       
97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       
97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       
97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       
97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         
1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 853 pages reserved
[    0.000000]   DMA zone: 3090 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 
00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 
00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 
0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 
00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 
00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 
00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 
00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 
00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 
00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 
00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 
00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 
0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: 
d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 1030522
[    0.000000] Kernel command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 
console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   32.744190] Marking TSC unstable due to TSCs unsynchronized
[   32.744192] time.c: Detected 3013.888 MHz processor.
[   32.748009] Console: colour VGA+ 80x25
[   32.748011] console [tty6] enabled
[   32.752634] Dentry cache hash table entries: 524288 (order: 10, 4194304 
bytes)
[   32.754864] Inode-cache hash table entries: 262144 (order: 9, 2097152 
bytes)
[   32.755634] Checking aperture...
[   32.755672] CPU 0: aperture @ 8000000 size 32 MB
[   32.755709] Aperture too small (32 MB)
[   32.761552] No AGP bridge found
[   32.761588] Your BIOS doesn't leave a aperture memory hole
[   32.761625] Please enable the IOMMU option in the BIOS setup
[   32.761663] This costs you 64 MB of RAM
[   32.786893] Mapping aperture over 65536 KB of RAM @ 8000000
[   32.811013] Memory: 4049948k/4980736k available (2192k kernel code, 143428k 
reserved, 681k data, 176k init)
[   32.811081] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, 
Nodes=1
[   32.893841] Calibrating delay using timer specific routine.. 6034.68 
BogoMIPS (lpj=10053897)
[   32.893933] Mount-cache hash table entries: 256
[   32.894040] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   32.894080] CPU: L2 Cache: 1024K (64 bytes/line)
[   32.894118] CPU: Physical Processor ID: 0
[   32.894154] CPU: Processor Core ID: 0
[   32.894207] SMP alternatives: switching to UP code
[   32.894570] ACPI: Core revision 20070126
[   32.929746] Using local APIC timer interrupts.
[   32.962890] APIC timer calibration result 12557872
[   32.962891] Detected 12.557 MHz APIC timer.
[   32.962975] SMP alternatives: switching to SMP code
[   32.963204] Booting processor 1/2 APIC 0x1
[   32.973324] Initializing CPU#1
[   33.056090] Calibrating delay using timer specific routine.. 6030.92 
BogoMIPS (lpj=10046278)
[   33.056094] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   33.056096] CPU: L2 Cache: 1024K (64 bytes/line)
[   33.056097] CPU: Physical Processor ID: 0
[   33.056098] CPU: Processor Core ID: 1
[   33.056178] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   33.056232] Brought up 2 CPUs
[   33.056689] net_namespace: 120 bytes
[   33.056921] NET: Registered protocol family 16
[   33.057033] ACPI: bus type pci registered
[   33.057114] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   33.057153] PCI: Not using MMCONFIG.
[   33.057189] PCI: Using configuration type 1
[   33.059432] ACPI: EC: Look up EC in DSDT
[   33.062880] ACPI: Interpreter enabled
[   33.062917] ACPI: (supports S0 S1 S3 S4 S5)
[   33.063087] ACPI: Using IOAPIC for interrupt routing
[   33.063295] Error attaching device data
[   33.063334] Error attaching device data
[   33.063372] Error attaching device data
[   33.063411] Error attaching device data
[   33.068322] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   33.068857] PCI: Transparent bridge - 0000:00:08.0
[   33.069157] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   33.069289] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   33.069386] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   33.069441] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   33.069496] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   33.069551] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   33.073491] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   33.073826] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   33.074160] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, 
disabled.
[   33.074520] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, 
disabled.
[   33.074880] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, 
disabled.
[   33.075238] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   33.075571] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, 
disabled.
[   33.075931] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   33.076267] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   33.076601] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, 
disabled.
[   33.076961] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   33.077294] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, 
disabled.
[   33.077654] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, 
disabled.
[   33.078014] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   33.078348] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, 
disabled.
[   33.078708] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   33.079041] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, 
disabled.
[   33.079439] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, 
disabled.
[   33.079799] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, 
disabled.
[   33.080159] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, 
disabled.
[   33.080477] Linux Plug and Play Support v0.97 (c) Adam Belay
[   33.080530] pnp: PnP ACPI init
[   33.080569] ACPI: bus type pnp registered
[   33.083109] pnp: PnP ACPI: found 13 devices
[   33.083146] ACPI: ACPI bus type pnp unregistered
[   33.083268] SCSI subsystem initialized
[   33.083325] libata version 3.00 loaded.
[   33.083375] usbcore: registered new interface driver usbfs
[   33.083431] usbcore: registered new interface driver hub
[   33.083488] usbcore: registered new device driver usb
[   33.083572] PCI: Using ACPI for IRQ routing
[   33.083609] PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
[   33.092684] PCI-DMA: Disabling AGP.
[   33.093419] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   33.093460] PCI-DMA: using GART IOMMU.
[   33.093500] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   33.093658] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   33.093797] hpet0: 3 32-bit timers, 25000000 Hz
[   33.095969] Time: hpet clocksource has been installed.
[   33.096017] Switched to high resolution mode on CPU 0
[   33.096108] Switched to high resolution mode on CPU 1
[   33.102701] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   33.106092] system 00:05: ioport range 0x800-0x80f has been reserved
[   33.106132] system 00:05: ioport range 0x2000-0x207f has been reserved
[   33.106171] system 00:05: ioport range 0x2080-0x20ff has been reserved
[   33.106210] system 00:05: ioport range 0x2400-0x247f has been reserved
[   33.106250] system 00:05: ioport range 0x2480-0x24ff has been reserved
[   33.106289] system 00:05: ioport range 0x2800-0x287f has been reserved
[   33.106328] system 00:05: ioport range 0x2880-0x28ff has been reserved
[   33.106367] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   33.106407] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[   33.106446] system 00:05: iomem range 0x0-0x0 could not be reserved
[   33.106486] system 00:05: iomem range 0xfee01000-0xfeefffff has been 
reserved
[   33.106529] system 00:07: iomem range 0xfec00000-0xfec00fff could not be 
reserved
[   33.106577] system 00:07: iomem range 0xfee00000-0xfee00fff could not be 
reserved
[   33.106627] system 00:0a: ioport range 0x290-0x29f has been reserved
[   33.106670] system 00:0b: iomem range 0xe0000000-0xefffffff has been 
reserved
[   33.106715] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   33.106754] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   33.106794] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   33.106837] system 00:0c: iomem range 0x100000-0xcfffffff could not be 
reserved
[   33.106884] system 00:0c: iomem range 0xff380000-0xffffffff could not be 
reserved
[   33.107166] PCI: Bridge: 0000:00:08.0
[   33.107203]   IO window: d000-dfff
[   33.107240]   MEM window: f9f00000-f9ffffff
[   33.107278]   PREFETCH window: disabled.
[   33.107315] PCI: Bridge: 0000:00:0b.0
[   33.107352]   IO window: c000-cfff
[   33.107388]   MEM window: f9e00000-f9efffff
[   33.107425]   PREFETCH window: disabled.
[   33.107462] PCI: Bridge: 0000:00:0c.0
[   33.107498]   IO window: disabled.
[   33.107534]   MEM window: disabled.
[   33.107570]   PREFETCH window: disabled.
[   33.107608] PCI: Bridge: 0000:00:0d.0
[   33.107644]   IO window: e000-efff
[   33.107681]   MEM window: fa000000-febfffff
[   33.107717]   PREFETCH window: d0000000-dfffffff
[   33.107755] PCI: Bridge: 0000:00:0e.0
[   33.107791]   IO window: disabled.
[   33.107827]   MEM window: disabled.
[   33.107863]   PREFETCH window: disabled.
[   33.107906] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   33.107915] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   33.107920] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   33.107925] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   33.107930] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   33.107936] NET: Registered protocol family 2
[   33.139267] IP route cache hash table entries: 131072 (order: 8, 1048576 
bytes)
[   33.139864] TCP established hash table entries: 262144 (order: 10, 4194304 
bytes)
[   33.141290] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   33.141777] TCP: Hash tables configured (established 262144 bind 65536)
[   33.141816] TCP reno registered
[   33.150050] Loading Reiser4. See www.namesys.com for a description of 
Reiser4.
[   33.150154] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
254)
[   33.150202] io scheduler noop registered
[   33.150240] io scheduler cfq registered (default)
[   33.150934] Boot video device is 0000:04:00.0
[   33.151038] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   33.151056] assign_interrupt_mode Found MSI capability
[   33.151096] Allocate Port Service[0000:00:0b.0:pcie00]
[   33.151139] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   33.151156] assign_interrupt_mode Found MSI capability
[   33.151194] Allocate Port Service[0000:00:0c.0:pcie00]
[   33.151231] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   33.151248] assign_interrupt_mode Found MSI capability
[   33.151286] Allocate Port Service[0000:00:0d.0:pcie00]
[   33.151325] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   33.151341] assign_interrupt_mode Found MSI capability
[   33.151379] Allocate Port Service[0000:00:0e.0:pcie00]
[   33.151554] input: Power Button (FF) as /class/input/input0
[   33.151592] ACPI: Power Button (FF) [PWRF]
[   33.151677] input: Power Button (CM) as /class/input/input1
[   33.151716] ACPI: Power Button (CM) [PWRB]
[   33.151850] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   33.151955] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   33.175890] Real Time Clock Driver v1.12ac
[   33.176009] hpet_resources: 0xfed00000 is busy
[   33.176026] Linux agpgart interface v0.102
[   33.176111] Driver 'sd' needs updating - please use bus_type methods
[   33.176184] ahci 0000:00:0a.0: version 3.0
[   33.176359] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   33.176403] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   34.179224] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl SATA mode
[   34.179276] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[   34.179315] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   34.179517] scsi0 : ahci
[   34.179613] scsi1 : ahci
[   34.179678] scsi2 : ahci
[   34.179744] scsi3 : ahci
[   34.179833] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 23
[   34.179880] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 23
[   34.179927] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 23
[   34.179975] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 23
[   34.180028] ata1: hard resetting link
[   34.808890] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   34.809485] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   34.809527] ata1.00: 312581808 sectors, multi 16: LBA48 
[   34.810165] ata1.00: configured for UDMA/133
[   34.810204] ata1: EH complete
[   34.810212] ata2: hard resetting link
[   35.440852] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   35.461416] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   35.461455] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   35.463445] ata2.00: configured for UDMA/133
[   35.463483] ata2: EH complete
[   35.463491] ata3: hard resetting link
[   35.780114] ata3: SATA link down (SStatus 0 SControl 300)
[   35.780154] ata3: EH complete
[   35.780193] ata4: hard resetting link
[   36.099420] ata4: SATA link down (SStatus 0 SControl 300)
[   36.099459] ata4: EH complete
[   36.099544] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   36.099655] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   36.099699] sd 0:0:0:0: [sda] Write Protect is off
[   36.099737] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   36.099745] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   36.099815] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   36.099858] sd 0:0:0:0: [sda] Write Protect is off
[   36.099896] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   36.099903] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   36.099952]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   36.125407] sd 0:0:0:0: [sda] Attached SCSI disk
[   36.125541] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   36.125650] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   36.125695] sd 1:0:0:0: [sdb] Write Protect is off
[   36.125733] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   36.125742] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   36.125811] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   36.125855] sd 1:0:0:0: [sdb] Write Protect is off
[   36.125892] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   36.125900] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   36.125949]  sdb: sdb1 sdb2
[   36.172294] sd 1:0:0:0: [sdb] Attached SCSI disk
[   36.172431] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 
irq 1,12
[   36.175006] serio: i8042 KBD port at 0x60,0x64 irq 1
[   36.175046] serio: i8042 AUX port at 0x60,0x64 irq 12
[   36.200129] usbcore: registered new interface driver usbhid
[   36.200168] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   36.200213] TCP cubic registered
[   36.200252] NET: Registered protocol family 1
[   36.200306] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 
6000+ processors (2 cpu cores) (version 2.20.00)
[   36.200350] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   36.200389] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   36.200427] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   36.200465] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   36.200504] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   36.200542] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   36.200580] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   36.200618] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   36.226935] input: AT Translated Set 2 keyboard as /class/input/input2
[   36.321226] ReiserFS: sda3: found reiserfs format "3.6" with standard 
journal
[   36.321269] ReiserFS: sda3: using ordered data mode
[   36.330801] ReiserFS: sda3: journal params: device sda3, size 8192, journal 
first block 18, max trans len 1024, max batch 900, max commit age 30, max 
trans age 30
[   36.331689] ReiserFS: sda3: checking transaction log (sda3)
[   36.375107] ReiserFS: sda3: Using r5 hash to sort names
[   36.375158] VFS: Mounted root (reiserfs filesystem) readonly.
[   36.375208] Freeing unused kernel memory: 176k freed
[   36.642927] Clocksource tsc unstable (delta = -121953431 ns)
[   38.097912] ReiserFS: sda3: switching to journaled data mode
[   38.197545] r8169 Gigabit Ethernet driver 2.2LK loaded
[   38.197754] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   38.197759] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 
(level, low) -> IRQ 19
[   38.197768] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   38.197773] r8169 0000:01:00.0: no MSI. Back to INTx.
[   38.197898] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, 
XID 38000000 IRQ 19
[   38.212572] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   38.212578] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 
(level, low) -> IRQ 22
[   38.212739] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   38.212742] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   38.212814] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus 
number 1
[   38.212836] ehci_hcd 0000:00:02.1: debug port 1
[   38.212838] PCI: cache line size of 64 is not supported by device 
0000:00:02.1
[   38.212844] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   38.215380] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 
Dec 2004
[   38.215451] usb usb1: configuration #1 chosen from 1 choice
[   38.215466] hub 1-0:1.0: USB hub found
[   38.215471] hub 1-0:1.0: 10 ports detected
[   38.324831] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   38.366641] usb 1-3: configuration #1 chosen from 1 choice
[   38.366825] hub 1-3:1.0: USB hub found
[   38.367243] hub 1-3:1.0: 4 ports detected
[   38.373811] reiser4: sdb2: found disk format 4.0.0.
[   38.465745] usb 1-3.1: new low speed USB device using ehci_hcd and address 
3
[   38.495519] usb 1-3.1: configuration #1 chosen from 1 choice
[   38.499113] input: Logitech USB Receiver as /class/input/input3
[   38.506993] input: USB HID v1.11 Mouse [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   38.509283] input: Logitech USB Receiver as /class/input/input4
[   38.524731] input: USB HID v1.11 Device [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   38.528863] mice: PS/2 mouse device common for all mice
[   46.563647] reiser4: sda6: found disk format 4.0.0.
[   47.004306] reiser4: sdb1: found disk format 4.0.0.
[   47.362569] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 
across:1951888k
[   48.769822] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   48.769828] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 
(level, low) -> IRQ 18
[   48.770924] Audigy2 value: Special config.
[   50.135233] w83627ehf: Found W83627EHG chip at 0x290
[   51.103076] r8169: eth0: link up
[   51.103107] r8169: eth0: link up
[   51.769942] NET: Registered protocol family 17
------------------------------------------------------------------------------------------
AHCI without nomsi:
no dmesg, because disks not found, like always. Kernel Panic at end of kernel 
boot because no root-fs.
-------------------------------------------------------------------------------------------
Non-Raid, coldboot, without nomsi:

[    0.000000] Linux version 2.6.24.3reiser4mcp65patch (root@energy) (gcc 
version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Apr 2 07:31:52 CEST 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       
97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       
97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 
20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       
97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       
97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       
97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       
97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         
1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 853 pages reserved
[    0.000000]   DMA zone: 3090 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 
00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 
00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 
0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 
00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 
00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 
00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 
00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 
00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 
00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 
00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 
00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 
0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: 
d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 1030522
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   37.102619] Marking TSC unstable due to TSCs unsynchronized
[   37.102621] time.c: Detected 3013.889 MHz processor.
[   37.106452] Console: colour VGA+ 80x25
[   37.106454] console [tty6] enabled
[   37.111062] Dentry cache hash table entries: 524288 (order: 10, 4194304 
bytes)
[   37.113292] Inode-cache hash table entries: 262144 (order: 9, 2097152 
bytes)
[   37.114061] Checking aperture...
[   37.114099] CPU 0: aperture @ ecca000000 size 32 MB
[   37.114137] Aperture too small (32 MB)
[   37.120018] No AGP bridge found
[   37.120054] Your BIOS doesn't leave a aperture memory hole
[   37.120092] Please enable the IOMMU option in the BIOS setup
[   37.120130] This costs you 64 MB of RAM
[   37.145357] Mapping aperture over 65536 KB of RAM @ 8000000
[   37.169480] Memory: 4049948k/4980736k available (2192k kernel code, 143428k 
reserved, 681k data, 176k init)
[   37.169548] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, 
Nodes=1
[   37.252270] Calibrating delay using timer specific routine.. 6034.69 
BogoMIPS (lpj=10053909)
[   37.252362] Mount-cache hash table entries: 256
[   37.252468] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   37.252508] CPU: L2 Cache: 1024K (64 bytes/line)
[   37.252546] CPU: Physical Processor ID: 0
[   37.252583] CPU: Processor Core ID: 0
[   37.252636] SMP alternatives: switching to UP code
[   37.252998] ACPI: Core revision 20070126
[   37.288173] Using local APIC timer interrupts.
[   37.321317] APIC timer calibration result 12557880
[   37.321319] Detected 12.557 MHz APIC timer.
[   37.321403] SMP alternatives: switching to SMP code
[   37.321633] Booting processor 1/2 APIC 0x1
[   37.331808] Initializing CPU#1
[   37.414571] Calibrating delay using timer specific routine.. 6030.92 
BogoMIPS (lpj=10046282)
[   37.414576] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   37.414577] CPU: L2 Cache: 1024K (64 bytes/line)
[   37.414579] CPU: Physical Processor ID: 0
[   37.414580] CPU: Processor Core ID: 1
[   37.414660] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   37.414661] Brought up 2 CPUs
[   37.415120] net_namespace: 120 bytes
[   37.415351] NET: Registered protocol family 16
[   37.415464] ACPI: bus type pci registered
[   37.415546] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   37.415585] PCI: Not using MMCONFIG.
[   37.415622] PCI: Using configuration type 1
[   37.417864] ACPI: EC: Look up EC in DSDT
[   37.421312] ACPI: Interpreter enabled
[   37.421349] ACPI: (supports S0 S1 S3 S4 S5)
[   37.421519] ACPI: Using IOAPIC for interrupt routing
[   37.421728] Error attaching device data
[   37.421767] Error attaching device data
[   37.421806] Error attaching device data
[   37.421845] Error attaching device data
[   37.426756] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   37.427293] PCI: Transparent bridge - 0000:00:08.0
[   37.427592] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   37.427724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   37.427821] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   37.427877] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   37.427932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   37.427987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   37.431926] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   37.432262] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   37.432597] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, 
disabled.
[   37.432958] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, 
disabled.
[   37.433318] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, 
disabled.
[   37.433678] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   37.434012] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, 
disabled.
[   37.434373] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   37.434710] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   37.435044] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, 
disabled.
[   37.435405] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   37.435739] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, 
disabled.
[   37.436100] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, 
disabled.
[   37.436460] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   37.436795] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, 
disabled.
[   37.437156] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   37.437490] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, 
disabled.
[   37.437888] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, 
disabled.
[   37.438249] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, 
disabled.
[   37.438611] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, 
disabled.
[   37.438929] Linux Plug and Play Support v0.97 (c) Adam Belay
[   37.438983] pnp: PnP ACPI init
[   37.439022] ACPI: bus type pnp registered
[   37.441561] pnp: PnP ACPI: found 13 devices
[   37.441598] ACPI: ACPI bus type pnp unregistered
[   37.441720] SCSI subsystem initialized
[   37.441777] libata version 3.00 loaded.
[   37.441828] usbcore: registered new interface driver usbfs
[   37.441884] usbcore: registered new interface driver hub
[   37.441941] usbcore: registered new device driver usb
[   37.442025] PCI: Using ACPI for IRQ routing
[   37.442062] PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
[   37.451111] PCI-DMA: Disabling AGP.
[   37.451847] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   37.451888] PCI-DMA: using GART IOMMU.
[   37.451928] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   37.452087] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   37.452226] hpet0: 3 32-bit timers, 25000000 Hz
[   37.454396] Time: hpet clocksource has been installed.
[   37.454445] Switched to high resolution mode on CPU 0
[   37.454590] Switched to high resolution mode on CPU 1
[   37.461128] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   37.461168] system 00:05: ioport range 0x800-0x80f has been reserved
[   37.461208] system 00:05: ioport range 0x2000-0x207f has been reserved
[   37.461247] system 00:05: ioport range 0x2080-0x20ff has been reserved
[   37.464651] system 00:05: ioport range 0x2400-0x247f has been reserved
[   37.464690] system 00:05: ioport range 0x2480-0x24ff has been reserved
[   37.464729] system 00:05: ioport range 0x2800-0x287f has been reserved
[   37.464769] system 00:05: ioport range 0x2880-0x28ff has been reserved
[   37.464808] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   37.464847] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[   37.464887] system 00:05: iomem range 0x0-0x0 could not be reserved
[   37.464927] system 00:05: iomem range 0xfee01000-0xfeefffff has been 
reserved
[   37.464970] system 00:07: iomem range 0xfec00000-0xfec00fff could not be 
reserved
[   37.465018] system 00:07: iomem range 0xfee00000-0xfee00fff could not be 
reserved
[   37.465068] system 00:0a: ioport range 0x290-0x29f has been reserved
[   37.465111] system 00:0b: iomem range 0xe0000000-0xefffffff has been 
reserved
[   37.465156] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   37.465195] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   37.465239] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   37.465279] system 00:0c: iomem range 0x100000-0xcfffffff could not be 
reserved
[   37.465326] system 00:0c: iomem range 0xff380000-0xffffffff could not be 
reserved
[   37.465608] PCI: Bridge: 0000:00:08.0
[   37.465645]   IO window: d000-dfff
[   37.465683]   MEM window: f9f00000-f9ffffff
[   37.465720]   PREFETCH window: disabled.
[   37.465758] PCI: Bridge: 0000:00:0b.0
[   37.465794]   IO window: c000-cfff
[   37.465831]   MEM window: f9e00000-f9efffff
[   37.465867]   PREFETCH window: disabled.
[   37.465905] PCI: Bridge: 0000:00:0c.0
[   37.465941]   IO window: disabled.
[   37.465977]   MEM window: disabled.
[   37.466013]   PREFETCH window: disabled.
[   37.466051] PCI: Bridge: 0000:00:0d.0
[   37.466087]   IO window: e000-efff
[   37.466123]   MEM window: fa000000-febfffff
[   37.466161]   PREFETCH window: d0000000-dfffffff
[   37.466198] PCI: Bridge: 0000:00:0e.0
[   37.466234]   IO window: disabled.
[   37.466271]   MEM window: disabled.
[   37.466307]   PREFETCH window: disabled.
[   37.466350] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   37.466359] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   37.466364] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   37.466369] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   37.466374] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   37.466379] NET: Registered protocol family 2
[   37.497695] IP route cache hash table entries: 131072 (order: 8, 1048576 
bytes)
[   37.498291] TCP established hash table entries: 262144 (order: 10, 4194304 
bytes)
[   37.499717] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   37.500203] TCP: Hash tables configured (established 262144 bind 65536)
[   37.500243] TCP reno registered
[   37.508476] Loading Reiser4. See www.namesys.com for a description of 
Reiser4.
[   37.508580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
254)
[   37.508628] io scheduler noop registered
[   37.508666] io scheduler cfq registered (default)
[   37.509360] Boot video device is 0000:04:00.0
[   37.509463] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   37.509481] assign_interrupt_mode Found MSI capability
[   37.509536] Allocate Port Service[0000:00:0b.0:pcie00]
[   37.509579] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   37.509596] assign_interrupt_mode Found MSI capability
[   37.509645] Allocate Port Service[0000:00:0c.0:pcie00]
[   37.509683] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   37.509700] assign_interrupt_mode Found MSI capability
[   37.509748] Allocate Port Service[0000:00:0d.0:pcie00]
[   37.509787] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   37.509804] assign_interrupt_mode Found MSI capability
[   37.509853] Allocate Port Service[0000:00:0e.0:pcie00]
[   37.510027] input: Power Button (FF) as /class/input/input0
[   37.510066] ACPI: Power Button (FF) [PWRF]
[   37.510151] input: Power Button (CM) as /class/input/input1
[   37.510189] ACPI: Power Button (CM) [PWRB]
[   37.510323] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   37.510428] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   37.534318] Real Time Clock Driver v1.12ac
[   37.534436] hpet_resources: 0xfed00000 is busy
[   37.534453] Linux agpgart interface v0.102
[   37.534538] Driver 'sd' needs updating - please use bus_type methods
[   37.534611] ahci 0000:00:0a.0: version 3.0
[   37.534786] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   37.534830] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   38.535364] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   38.535416] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[   38.535456] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   38.535658] scsi0 : ahci
[   38.535753] scsi1 : ahci
[   38.535819] scsi2 : ahci
[   38.535885] scsi3 : ahci
[   38.535973] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   38.536021] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   38.536068] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   38.536116] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   38.536170] ata1: hard resetting link
[   39.167317] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   69.102247] ata1.00: qc timeout (cmd 0xec)
[   69.102286] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   69.102325] ata1: failed to recover some devices, retrying in 5 secs
[   74.094724] ata1: hard resetting link
[   74.726687] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   74.727355] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   74.727397] ata1.00: 312581808 sectors, multi 16: LBA48 
[   74.728021] ata1.00: configured for UDMA/133
[   74.728065] ata1: EH complete
[   74.728020] ata2: hard resetting link
[   75.358646] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   75.360694] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   75.360734] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   75.362725] ata2.00: configured for UDMA/133
[   75.362763] ata2: EH complete
[   75.362716] ata3: hard resetting link
[   75.681278] ata3: SATA link down (SStatus 0 SControl 300)
[   75.681318] ata3: EH complete
[   75.681356] ata4: hard resetting link
[   76.000584] ata4: SATA link down (SStatus 0 SControl 300)
[   76.000622] ata4: EH complete
[   76.000707] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   76.000817] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   76.000861] sd 0:0:0:0: [sda] Write Protect is off
[   76.000899] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   76.000907] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   76.000977] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   76.001020] sd 0:0:0:0: [sda] Write Protect is off
[   76.001058] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   76.001065] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   76.001114]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   76.027136] sd 0:0:0:0: [sda] Attached SCSI disk
[   76.027269] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   76.027383] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   76.027428] sd 1:0:0:0: [sdb] Write Protect is off
[   76.027466] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   76.027475] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   76.027544] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   76.027588] sd 1:0:0:0: [sdb] Write Protect is off
[   76.027625] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   76.027633] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   76.027682]  sdb: sdb1 sdb2
[   76.076523] sd 1:0:0:0: [sdb] Attached SCSI disk
[   76.076661] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 
irq 1,12
[   76.079553] serio: i8042 KBD port at 0x60,0x64 irq 1
[   76.079593] serio: i8042 AUX port at 0x60,0x64 irq 12
[   76.104671] usbcore: registered new interface driver usbhid
[   76.104710] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   76.104754] TCP cubic registered
[   76.104793] NET: Registered protocol family 1
[   76.104847] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 
6000+ processors (2 cpu cores) (version 2.20.00)
[   76.104838] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   76.104877] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   76.104916] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   76.104954] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   76.104992] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   76.105030] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   76.105068] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   76.105107] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   76.128444] input: AT Translated Set 2 keyboard as /class/input/input2
[   76.215268] ReiserFS: sda3: found reiserfs format "3.6" with standard 
journal
[   76.215286] ReiserFS: sda3: using ordered data mode
[   76.218449] ReiserFS: sda3: journal params: device sda3, size 8192, journal 
first block 18, max trans len 1024, max batch 900, max commit age 30, max 
trans age 30
[   76.219179] ReiserFS: sda3: checking transaction log (sda3)
[   76.233219] ReiserFS: sda3: Using r5 hash to sort names
[   76.233243] VFS: Mounted root (reiserfs filesystem) readonly.
[   76.233268] Freeing unused kernel memory: 176k freed
[   76.320130] Clocksource tsc unstable (delta = -226409081 ns)
[   77.843642] ReiserFS: sda3: switching to journaled data mode
[   77.937038] r8169 Gigabit Ethernet driver 2.2LK loaded
[   77.937245] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   77.937250] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 
(level, low) -> IRQ 19
[   77.937259] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   77.937407] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, 
XID 38000000 IRQ 314
[   77.943778] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   77.943784] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 
(level, low) -> IRQ 22
[   77.943935] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   77.943939] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   77.944013] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus 
number 1
[   77.944034] ehci_hcd 0000:00:02.1: debug port 1
[   77.944036] PCI: cache line size of 64 is not supported by device 
0000:00:02.1
[   77.944043] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   77.946961] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 
Dec 2004
[   77.947033] usb usb1: configuration #1 chosen from 1 choice
[   77.947047] hub 1-0:1.0: USB hub found
[   77.947052] hub 1-0:1.0: 10 ports detected
[   78.056358] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   78.098216] usb 1-3: configuration #1 chosen from 1 choice
[   78.098396] hub 1-3:1.0: USB hub found
[   78.100884] hub 1-3:1.0: 4 ports detected
[   78.104406] reiser4: sdb2: found disk format 4.0.0.
[   78.197319] usb 1-3.1: new low speed USB device using ehci_hcd and address 
3
[   78.227050] usb 1-3.1: configuration #1 chosen from 1 choice
[   78.230650] input: Logitech USB Receiver as /class/input/input3
[   78.238571] input: USB HID v1.11 Mouse [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   78.240817] input: Logitech USB Receiver as /class/input/input4
[   78.256310] input: USB HID v1.11 Device [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   78.260759] mice: PS/2 mouse device common for all mice
[   86.535824] reiser4: sda6: found disk format 4.0.0.
[   86.992785] reiser4: sdb1: found disk format 4.0.0.
[   87.343050] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 
across:1951888k
[   89.330471] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   89.330476] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 
(level, low) -> IRQ 18
[   89.331562] Audigy2 value: Special config.
[   90.787221] w83627ehf: Found W83627EHG chip at 0x290
[   91.679513] r8169: eth0: link up
[   91.679616] r8169: eth0: link up
[   92.349231] NET: Registered protocol family 17
--------------------------------------------------------------------------------------

Non-Raid, coldboot with nomsi:

[    0.000000] Linux version 2.6.24.3reiser4mcp65patch (root@energy) (gcc 
version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Apr 2 07:31:52 CEST 2008
[    0.000000] Command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 
console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       
97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       
97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 
20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       
97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       
97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       
97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       
97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         
1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 853 pages reserved
[    0.000000]   DMA zone: 3090 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 
00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 
00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 
0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 
00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 
00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 
00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 
00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 
00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 
00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 
00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 
00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 
0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: 
d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 1030522
[    0.000000] Kernel command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 
console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   27.759462] Marking TSC unstable due to TSCs unsynchronized
[   27.759464] time.c: Detected 3013.887 MHz processor.
[   27.763286] Console: colour VGA+ 80x25
[   27.763288] console [tty6] enabled
[   27.767917] Dentry cache hash table entries: 524288 (order: 10, 4194304 
bytes)
[   27.770146] Inode-cache hash table entries: 262144 (order: 9, 2097152 
bytes)
[   27.770916] Checking aperture...
[   27.770953] CPU 0: aperture @ ec8a000000 size 32 MB
[   27.770991] Aperture too small (32 MB)
[   27.776850] No AGP bridge found
[   27.776886] Your BIOS doesn't leave a aperture memory hole
[   27.776924] Please enable the IOMMU option in the BIOS setup
[   27.776962] This costs you 64 MB of RAM
[   27.802191] Mapping aperture over 65536 KB of RAM @ 8000000
[   27.826316] Memory: 4049948k/4980736k available (2192k kernel code, 143428k 
reserved, 681k data, 176k init)
[   27.826385] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, 
Nodes=1
[   27.909114] Calibrating delay using timer specific routine.. 6034.69 
BogoMIPS (lpj=10053917)
[   27.909206] Mount-cache hash table entries: 256
[   27.909312] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   27.909352] CPU: L2 Cache: 1024K (64 bytes/line)
[   27.909390] CPU: Physical Processor ID: 0
[   27.909427] CPU: Processor Core ID: 0
[   27.909480] SMP alternatives: switching to UP code
[   27.909843] ACPI: Core revision 20070126
[   27.945018] Using local APIC timer interrupts.
[   27.978163] APIC timer calibration result 12557871
[   27.978164] Detected 12.557 MHz APIC timer.
[   27.978249] SMP alternatives: switching to SMP code
[   27.978478] Booting processor 1/2 APIC 0x1
[   27.988624] Initializing CPU#1
[   28.071388] Calibrating delay using timer specific routine.. 6030.92 
BogoMIPS (lpj=10046277)
[   28.071392] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   28.071394] CPU: L2 Cache: 1024K (64 bytes/line)
[   28.071395] CPU: Physical Processor ID: 0
[   28.071396] CPU: Processor Core ID: 1
[   28.071476] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   28.071506] Brought up 2 CPUs
[   28.071965] net_namespace: 120 bytes
[   28.072196] NET: Registered protocol family 16
[   28.072308] ACPI: bus type pci registered
[   28.072391] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   28.072430] PCI: Not using MMCONFIG.
[   28.072466] PCI: Using configuration type 1
[   28.074707] ACPI: EC: Look up EC in DSDT
[   28.078159] ACPI: Interpreter enabled
[   28.078197] ACPI: (supports S0 S1 S3 S4 S5)
[   28.078366] ACPI: Using IOAPIC for interrupt routing
[   28.078575] Error attaching device data
[   28.078614] Error attaching device data
[   28.078653] Error attaching device data
[   28.078691] Error attaching device data
[   28.083604] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   28.084141] PCI: Transparent bridge - 0000:00:08.0
[   28.084440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   28.084572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   28.084669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   28.084724] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   28.084779] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   28.084835] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   28.088773] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   28.089109] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   28.089443] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, 
disabled.
[   28.089804] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, 
disabled.
[   28.090164] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, 
disabled.
[   28.090524] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   28.090857] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, 
disabled.
[   28.091218] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   28.091554] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   28.091889] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, 
disabled.
[   28.092249] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   28.092583] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, 
disabled.
[   28.092943] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, 
disabled.
[   28.093304] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   28.093639] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, 
disabled.
[   28.093999] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   28.094334] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, 
disabled.
[   28.094731] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, 
disabled.
[   28.095092] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, 
disabled.
[   28.095452] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, 
disabled.
[   28.095770] Linux Plug and Play Support v0.97 (c) Adam Belay
[   28.095824] pnp: PnP ACPI init
[   28.095863] ACPI: bus type pnp registered
[   28.098401] pnp: PnP ACPI: found 13 devices
[   28.098438] ACPI: ACPI bus type pnp unregistered
[   28.098560] SCSI subsystem initialized
[   28.098617] libata version 3.00 loaded.
[   28.098667] usbcore: registered new interface driver usbfs
[   28.098723] usbcore: registered new interface driver hub
[   28.098780] usbcore: registered new device driver usb
[   28.098864] PCI: Using ACPI for IRQ routing
[   28.098902] PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
[   28.107957] PCI-DMA: Disabling AGP.
[   28.108693] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   28.108735] PCI-DMA: using GART IOMMU.
[   28.108775] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   28.108934] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   28.109073] hpet0: 3 32-bit timers, 25000000 Hz
[   28.111241] Time: hpet clocksource has been installed.
[   28.111290] Switched to high resolution mode on CPU 0
[   28.111406] Switched to high resolution mode on CPU 1
[   28.117973] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   28.121365] system 00:05: ioport range 0x800-0x80f has been reserved
[   28.121405] system 00:05: ioport range 0x2000-0x207f has been reserved
[   28.121444] system 00:05: ioport range 0x2080-0x20ff has been reserved
[   28.121483] system 00:05: ioport range 0x2400-0x247f has been reserved
[   28.121523] system 00:05: ioport range 0x2480-0x24ff has been reserved
[   28.121562] system 00:05: ioport range 0x2800-0x287f has been reserved
[   28.121601] system 00:05: ioport range 0x2880-0x28ff has been reserved
[   28.121641] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   28.121680] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[   28.121720] system 00:05: iomem range 0x0-0x0 could not be reserved
[   28.121759] system 00:05: iomem range 0xfee01000-0xfeefffff has been 
reserved
[   28.121803] system 00:07: iomem range 0xfec00000-0xfec00fff could not be 
reserved
[   28.121850] system 00:07: iomem range 0xfee00000-0xfee00fff could not be 
reserved
[   28.121901] system 00:0a: ioport range 0x290-0x29f has been reserved
[   28.121944] system 00:0b: iomem range 0xe0000000-0xefffffff has been 
reserved
[   28.121989] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   28.122028] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   28.122068] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   28.122111] system 00:0c: iomem range 0x100000-0xcfffffff could not be 
reserved
[   28.122159] system 00:0c: iomem range 0xff380000-0xffffffff could not be 
reserved
[   28.122441] PCI: Bridge: 0000:00:08.0
[   28.122478]   IO window: d000-dfff
[   28.122515]   MEM window: f9f00000-f9ffffff
[   28.122553]   PREFETCH window: disabled.
[   28.122590] PCI: Bridge: 0000:00:0b.0
[   28.122627]   IO window: c000-cfff
[   28.122663]   MEM window: f9e00000-f9efffff
[   28.122700]   PREFETCH window: disabled.
[   28.122737] PCI: Bridge: 0000:00:0c.0
[   28.122773]   IO window: disabled.
[   28.122809]   MEM window: disabled.
[   28.122846]   PREFETCH window: disabled.
[   28.122883] PCI: Bridge: 0000:00:0d.0
[   28.122919]   IO window: e000-efff
[   28.122956]   MEM window: fa000000-febfffff
[   28.122993]   PREFETCH window: d0000000-dfffffff
[   28.123031] PCI: Bridge: 0000:00:0e.0
[   28.123067]   IO window: disabled.
[   28.123103]   MEM window: disabled.
[   28.123139]   PREFETCH window: disabled.
[   28.123182] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   28.123191] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   28.123196] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   28.123201] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   28.123206] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   28.123212] NET: Registered protocol family 2
[   28.154540] IP route cache hash table entries: 131072 (order: 8, 1048576 
bytes)
[   28.155137] TCP established hash table entries: 262144 (order: 10, 4194304 
bytes)
[   28.156562] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   28.157048] TCP: Hash tables configured (established 262144 bind 65536)
[   28.157088] TCP reno registered
[   28.165321] Loading Reiser4. See www.namesys.com for a description of 
Reiser4.
[   28.165425] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
254)
[   28.165473] io scheduler noop registered
[   28.165511] io scheduler cfq registered (default)
[   28.166207] Boot video device is 0000:04:00.0
[   28.166310] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   28.166329] assign_interrupt_mode Found MSI capability
[   28.166369] Allocate Port Service[0000:00:0b.0:pcie00]
[   28.166412] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   28.166429] assign_interrupt_mode Found MSI capability
[   28.166468] Allocate Port Service[0000:00:0c.0:pcie00]
[   28.166505] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   28.166522] assign_interrupt_mode Found MSI capability
[   28.166560] Allocate Port Service[0000:00:0d.0:pcie00]
[   28.166599] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   28.166615] assign_interrupt_mode Found MSI capability
[   28.166654] Allocate Port Service[0000:00:0e.0:pcie00]
[   28.166828] input: Power Button (FF) as /class/input/input0
[   28.166867] ACPI: Power Button (FF) [PWRF]
[   28.166952] input: Power Button (CM) as /class/input/input1
[   28.166990] ACPI: Power Button (CM) [PWRB]
[   28.167124] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   28.167229] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   28.191163] Real Time Clock Driver v1.12ac
[   28.191282] hpet_resources: 0xfed00000 is busy
[   28.191299] Linux agpgart interface v0.102
[   28.191384] Driver 'sd' needs updating - please use bus_type methods
[   28.191457] ahci 0000:00:0a.0: version 3.0
[   28.191632] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   28.191676] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   29.192210] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   29.192261] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[   29.192301] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   29.192503] scsi0 : ahci
[   29.192599] scsi1 : ahci
[   29.192665] scsi2 : ahci
[   29.192731] scsi3 : ahci
[   29.192820] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 23
[   29.192867] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 23
[   29.192914] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 23
[   29.192962] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 23
[   29.193015] ata1: hard resetting link
[   29.824163] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   59.759093] ata1.00: qc timeout (cmd 0xec)
[   59.759131] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[   59.759170] ata1: failed to recover some devices, retrying in 5 secs
[   64.751570] ata1: hard resetting link
[   65.383532] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   65.384169] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   65.384212] ata1.00: 312581808 sectors, multi 16: LBA48 
[   65.384862] ata1.00: configured for UDMA/133
[   65.384905] ata1: EH complete
[   65.384889] ata2: hard resetting link
[   66.015492] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   66.036080] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   66.036120] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   66.038117] ata2.00: configured for UDMA/133
[   66.038154] ata2: EH complete
[   66.038136] ata3: hard resetting link
[   66.354754] ata3: SATA link down (SStatus 0 SControl 300)
[   66.354793] ata3: EH complete
[   66.354832] ata4: hard resetting link
[   66.674059] ata4: SATA link down (SStatus 0 SControl 300)
[   66.674098] ata4: EH complete
[   66.674183] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   66.674293] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   66.674338] sd 0:0:0:0: [sda] Write Protect is off
[   66.674375] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   66.674384] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   66.674453] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   66.674496] sd 0:0:0:0: [sda] Write Protect is off
[   66.674534] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   66.674541] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   66.674590]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   66.708665] sd 0:0:0:0: [sda] Attached SCSI disk
[   66.708799] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   66.708908] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   66.708953] sd 1:0:0:0: [sdb] Write Protect is off
[   66.708991] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   66.709000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   66.709069] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   66.709112] sd 1:0:0:0: [sdb] Write Protect is off
[   66.709150] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   66.709157] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   66.709206]  sdb: sdb1 sdb2
[   66.768403] sd 1:0:0:0: [sdb] Attached SCSI disk
[   66.768541] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 
irq 1,12
[   66.771378] serio: i8042 KBD port at 0x60,0x64 irq 1
[   66.771423] serio: i8042 AUX port at 0x60,0x64 irq 12
[   66.798077] usbcore: registered new interface driver usbhid
[   66.798115] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   66.798160] TCP cubic registered
[   66.798199] NET: Registered protocol family 1
[   66.798253] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 
6000+ processors (2 cpu cores) (version 2.20.00)
[   66.798272] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   66.798312] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   66.798350] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   66.798388] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   66.798426] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   66.798465] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   66.798503] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   66.798541] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   66.823197] input: AT Translated Set 2 keyboard as /class/input/input2
[   66.876439] ReiserFS: sda3: found reiserfs format "3.6" with standard 
journal
[   66.876457] ReiserFS: sda3: using ordered data mode
[   66.879622] ReiserFS: sda3: journal params: device sda3, size 8192, journal 
first block 18, max trans len 1024, max batch 900, max commit age 30, max 
trans age 30
[   66.880353] ReiserFS: sda3: checking transaction log (sda3)
[   66.894391] ReiserFS: sda3: Using r5 hash to sort names
[   66.894415] VFS: Mounted root (reiserfs filesystem) readonly.
[   66.894440] Freeing unused kernel memory: 176k freed
[   66.970322] Clocksource tsc unstable (delta = -233077876 ns)
[   68.489857] ReiserFS: sda3: switching to journaled data mode
[   68.592695] r8169 Gigabit Ethernet driver 2.2LK loaded
[   68.592900] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   68.592905] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 
(level, low) -> IRQ 19
[   68.592913] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   68.592918] r8169 0000:01:00.0: no MSI. Back to INTx.
[   68.593042] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, 
XID 38000000 IRQ 19
[   68.604956] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   68.604962] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 
(level, low) -> IRQ 22
[   68.605120] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   68.605124] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   68.605197] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus 
number 1
[   68.605218] ehci_hcd 0000:00:02.1: debug port 1
[   68.605221] PCI: cache line size of 64 is not supported by device 
0000:00:02.1
[   68.605227] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   68.608985] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 
Dec 2004
[   68.609055] usb usb1: configuration #1 chosen from 1 choice
[   68.609070] hub 1-0:1.0: USB hub found
[   68.609075] hub 1-0:1.0: 10 ports detected
[   68.718144] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   68.759439] usb 1-3: configuration #1 chosen from 1 choice
[   68.759615] hub 1-3:1.0: USB hub found
[   68.762075] hub 1-3:1.0: 4 ports detected
[   68.765724] reiser4: sdb2: found disk format 4.0.0.
[   68.858877] usb 1-3.1: new low speed USB device using ehci_hcd and address 
3
[   68.893096] usb 1-3.1: configuration #1 chosen from 1 choice
[   68.896822] input: Logitech USB Receiver as /class/input/input3
[   68.902034] input: USB HID v1.11 Mouse [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   68.904024] input: Logitech USB Receiver as /class/input/input4
[   68.919782] input: USB HID v1.11 Device [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   68.928654] mice: PS/2 mouse device common for all mice
[   77.158319] reiser4: sda6: found disk format 4.0.0.
[   77.610522] reiser4: sdb1: found disk format 4.0.0.
[   77.962781] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 
across:1951888k
[   79.353427] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   79.353433] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 
(level, low) -> IRQ 18
[   79.354520] Audigy2 value: Special config.
[   81.058035] w83627ehf: Found W83627EHG chip at 0x290
[   81.933779] r8169: eth0: link up
[   81.933838] r8169: eth0: link up
[   82.344617] NET: Registered protocol family 17
-------------------------------------------------------------------------------------

Non-Raid, reboot without nomsi:

[    0.000000] Linux version 2.6.24.3reiser4mcp65patch (root@energy) (gcc 
version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Apr 2 07:31:52 CEST 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       
97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       
97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 
20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       
97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       
97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       
97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       
97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         
1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 853 pages reserved
[    0.000000]   DMA zone: 3090 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 
00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 
00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 
0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 
00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 
00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 
00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 
00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 
00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 
00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 
00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 
00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 
0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: 
d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 1030522
[    0.000000] Kernel command line: root=/dev/sda3 nmi_watchdog=0 console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   35.568901] Marking TSC unstable due to TSCs unsynchronized
[   35.568903] time.c: Detected 3013.888 MHz processor.
[   35.572728] Console: colour VGA+ 80x25
[   35.572730] console [tty6] enabled
[   35.577335] Dentry cache hash table entries: 524288 (order: 10, 4194304 
bytes)
[   35.579563] Inode-cache hash table entries: 262144 (order: 9, 2097152 
bytes)
[   35.580333] Checking aperture...
[   35.580371] CPU 0: aperture @ 8000000 size 32 MB
[   35.580408] Aperture too small (32 MB)
[   35.586252] No AGP bridge found
[   35.586288] Your BIOS doesn't leave a aperture memory hole
[   35.586326] Please enable the IOMMU option in the BIOS setup
[   35.586363] This costs you 64 MB of RAM
[   35.611594] Mapping aperture over 65536 KB of RAM @ 8000000
[   35.635717] Memory: 4049948k/4980736k available (2192k kernel code, 143428k 
reserved, 681k data, 176k init)
[   35.635785] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, 
Nodes=1
[   35.718550] Calibrating delay using timer specific routine.. 6034.68 
BogoMIPS (lpj=10053895)
[   35.718643] Mount-cache hash table entries: 256
[   35.718750] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   35.718789] CPU: L2 Cache: 1024K (64 bytes/line)
[   35.718827] CPU: Physical Processor ID: 0
[   35.718863] CPU: Processor Core ID: 0
[   35.718916] SMP alternatives: switching to UP code
[   35.719279] ACPI: Core revision 20070126
[   35.754456] Using local APIC timer interrupts.
[   35.787600] APIC timer calibration result 12557871
[   35.787601] Detected 12.557 MHz APIC timer.
[   35.787685] SMP alternatives: switching to SMP code
[   35.787915] Booting processor 1/2 APIC 0x1
[   35.798074] Initializing CPU#1
[   35.880838] Calibrating delay using timer specific routine.. 6030.92 
BogoMIPS (lpj=10046281)
[   35.880842] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   35.880844] CPU: L2 Cache: 1024K (64 bytes/line)
[   35.880846] CPU: Physical Processor ID: 0
[   35.880846] CPU: Processor Core ID: 1
[   35.880928] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   35.880942] Brought up 2 CPUs
[   35.881401] net_namespace: 120 bytes
[   35.881631] NET: Registered protocol family 16
[   35.881744] ACPI: bus type pci registered
[   35.881826] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   35.881865] PCI: Not using MMCONFIG.
[   35.881901] PCI: Using configuration type 1
[   35.884144] ACPI: EC: Look up EC in DSDT
[   35.887592] ACPI: Interpreter enabled
[   35.887630] ACPI: (supports S0 S1 S3 S4 S5)
[   35.887799] ACPI: Using IOAPIC for interrupt routing
[   35.888007] Error attaching device data
[   35.888047] Error attaching device data
[   35.888085] Error attaching device data
[   35.888124] Error attaching device data
[   35.893036] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   35.893571] PCI: Transparent bridge - 0000:00:08.0
[   35.893871] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   35.894003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   35.894100] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   35.894155] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   35.894210] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   35.894266] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   35.898204] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   35.898541] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   35.898875] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, 
disabled.
[   35.899235] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, 
disabled.
[   35.899595] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, 
disabled.
[   35.899955] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   35.900288] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, 
disabled.
[   35.900648] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   35.900985] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   35.901319] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, 
disabled.
[   35.901679] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   35.902013] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, 
disabled.
[   35.902373] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, 
disabled.
[   35.902734] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   35.903068] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, 
disabled.
[   35.903429] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   35.903763] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, 
disabled.
[   35.904160] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, 
disabled.
[   35.904521] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, 
disabled.
[   35.904882] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, 
disabled.
[   35.905200] Linux Plug and Play Support v0.97 (c) Adam Belay
[   35.905254] pnp: PnP ACPI init
[   35.905293] ACPI: bus type pnp registered
[   35.907831] pnp: PnP ACPI: found 13 devices
[   35.907869] ACPI: ACPI bus type pnp unregistered
[   35.907990] SCSI subsystem initialized
[   35.908047] libata version 3.00 loaded.
[   35.908098] usbcore: registered new interface driver usbfs
[   35.908153] usbcore: registered new interface driver hub
[   35.908210] usbcore: registered new device driver usb
[   35.908294] PCI: Using ACPI for IRQ routing
[   35.908332] PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
[   35.917394] PCI-DMA: Disabling AGP.
[   35.918130] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   35.918172] PCI-DMA: using GART IOMMU.
[   35.918211] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   35.918370] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   35.918509] hpet0: 3 32-bit timers, 25000000 Hz
[   35.920679] Time: hpet clocksource has been installed.
[   35.920727] Switched to high resolution mode on CPU 0
[   35.920857] Switched to high resolution mode on CPU 1
[   35.927411] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   35.927451] system 00:05: ioport range 0x800-0x80f has been reserved
[   35.927490] system 00:05: ioport range 0x2000-0x207f has been reserved
[   35.927530] system 00:05: ioport range 0x2080-0x20ff has been reserved
[   35.930927] system 00:05: ioport range 0x2400-0x247f has been reserved
[   35.930967] system 00:05: ioport range 0x2480-0x24ff has been reserved
[   35.931006] system 00:05: ioport range 0x2800-0x287f has been reserved
[   35.931045] system 00:05: ioport range 0x2880-0x28ff has been reserved
[   35.931084] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   35.931124] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[   35.931163] system 00:05: iomem range 0x0-0x0 could not be reserved
[   35.931203] system 00:05: iomem range 0xfee01000-0xfeefffff has been 
reserved
[   35.931247] system 00:07: iomem range 0xfec00000-0xfec00fff could not be 
reserved
[   35.931294] system 00:07: iomem range 0xfee00000-0xfee00fff could not be 
reserved
[   35.931345] system 00:0a: ioport range 0x290-0x29f has been reserved
[   35.931387] system 00:0b: iomem range 0xe0000000-0xefffffff has been 
reserved
[   35.931433] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   35.931472] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   35.931514] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   35.931554] system 00:0c: iomem range 0x100000-0xcfffffff could not be 
reserved
[   35.931601] system 00:0c: iomem range 0xff380000-0xffffffff could not be 
reserved
[   35.931883] PCI: Bridge: 0000:00:08.0
[   35.931920]   IO window: d000-dfff
[   35.931958]   MEM window: f9f00000-f9ffffff
[   35.931995]   PREFETCH window: disabled.
[   35.932033] PCI: Bridge: 0000:00:0b.0
[   35.932069]   IO window: c000-cfff
[   35.932105]   MEM window: f9e00000-f9efffff
[   35.932142]   PREFETCH window: disabled.
[   35.932179] PCI: Bridge: 0000:00:0c.0
[   35.932215]   IO window: disabled.
[   35.932252]   MEM window: disabled.
[   35.932288]   PREFETCH window: disabled.
[   35.932325] PCI: Bridge: 0000:00:0d.0
[   35.932361]   IO window: e000-efff
[   35.932398]   MEM window: fa000000-febfffff
[   35.932435]   PREFETCH window: d0000000-dfffffff
[   35.932472] PCI: Bridge: 0000:00:0e.0
[   35.932508]   IO window: disabled.
[   35.932545]   MEM window: disabled.
[   35.932581]   PREFETCH window: disabled.
[   35.932624] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   35.932632] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   35.932638] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   35.932643] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   35.932648] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   35.932653] NET: Registered protocol family 2
[   35.963977] IP route cache hash table entries: 131072 (order: 8, 1048576 
bytes)
[   35.964574] TCP established hash table entries: 262144 (order: 10, 4194304 
bytes)
[   35.965998] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   35.966485] TCP: Hash tables configured (established 262144 bind 65536)
[   35.966524] TCP reno registered
[   35.974759] Loading Reiser4. See www.namesys.com for a description of 
Reiser4.
[   35.974862] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
254)
[   35.974910] io scheduler noop registered
[   35.974948] io scheduler cfq registered (default)
[   35.975645] Boot video device is 0000:04:00.0
[   35.975747] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   35.975765] assign_interrupt_mode Found MSI capability
[   35.975819] Allocate Port Service[0000:00:0b.0:pcie00]
[   35.975862] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   35.975879] assign_interrupt_mode Found MSI capability
[   35.975927] Allocate Port Service[0000:00:0c.0:pcie00]
[   35.975965] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   35.975982] assign_interrupt_mode Found MSI capability
[   35.976030] Allocate Port Service[0000:00:0d.0:pcie00]
[   35.976069] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   35.976085] assign_interrupt_mode Found MSI capability
[   35.976134] Allocate Port Service[0000:00:0e.0:pcie00]
[   35.976308] input: Power Button (FF) as /class/input/input0
[   35.976346] ACPI: Power Button (FF) [PWRF]
[   35.976431] input: Power Button (CM) as /class/input/input1
[   35.976470] ACPI: Power Button (CM) [PWRB]
[   35.976604] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   35.976708] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   36.000600] Real Time Clock Driver v1.12ac
[   36.000718] hpet_resources: 0xfed00000 is busy
[   36.000735] Linux agpgart interface v0.102
[   36.000821] Driver 'sd' needs updating - please use bus_type methods
[   36.000894] ahci 0000:00:0a.0: version 3.0
[   36.001069] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   36.001112] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   37.001647] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   37.001698] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[   37.001738] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   37.001939] scsi0 : ahci
[   37.002035] scsi1 : ahci
[   37.002101] scsi2 : ahci
[   37.002167] scsi3 : ahci
[   37.002256] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 315
[   37.002303] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 315
[   37.002351] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 315
[   37.002398] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 315
[   37.002451] ata1: hard resetting link
[   42.636064] ata1: port is slow to respond, please be patient (Status 0xd0)
[   46.999912] ata1: softreset failed (device not ready)
[   46.999950] ata1: hard resetting link
[   47.631874] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   47.632532] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   47.632575] ata1.00: 312581808 sectors, multi 16: LBA48 
[   47.633195] ata1.00: configured for UDMA/133
[   47.633234] ata1: EH complete
[   47.633204] ata2: hard resetting link
[   48.263834] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   48.284435] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   48.284475] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   48.286461] ata2.00: configured for UDMA/133
[   48.286498] ata2: EH complete
[   48.286467] ata3: hard resetting link
[   48.603096] ata3: SATA link down (SStatus 0 SControl 300)
[   48.603136] ata3: EH complete
[   48.603174] ata4: hard resetting link
[   48.922402] ata4: SATA link down (SStatus 0 SControl 300)
[   48.922441] ata4: EH complete
[   48.922526] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   48.922636] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   48.922681] sd 0:0:0:0: [sda] Write Protect is off
[   48.922718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   48.922727] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   48.922797] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   48.922840] sd 0:0:0:0: [sda] Write Protect is off
[   48.922877] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   48.922884] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   48.922934]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   48.947679] sd 0:0:0:0: [sda] Attached SCSI disk
[   48.947814] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   48.947923] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   48.947968] sd 1:0:0:0: [sdb] Write Protect is off
[   48.948005] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   48.948014] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   48.948084] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   48.948127] sd 1:0:0:0: [sdb] Write Protect is off
[   48.948165] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   48.948172] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   48.948221]  sdb: sdb1 sdb2
[   48.955675] sd 1:0:0:0: [sdb] Attached SCSI disk
[   48.955824] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 
irq 1,12
[   48.958615] serio: i8042 KBD port at 0x60,0x64 irq 1
[   48.958655] serio: i8042 AUX port at 0x60,0x64 irq 12
[   48.989889] usbcore: registered new interface driver usbhid
[   48.989928] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   48.989972] TCP cubic registered
[   48.990011] NET: Registered protocol family 1
[   48.990065] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 
6000+ processors (2 cpu cores) (version 2.20.00)
[   48.990071] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   48.990110] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   48.990149] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   48.990187] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   48.990225] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   48.990263] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   48.990301] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   48.990339] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   49.016392] input: AT Translated Set 2 keyboard as /class/input/input2
[   49.110257] ReiserFS: sda3: found reiserfs format "3.6" with standard 
journal
[   49.110300] ReiserFS: sda3: using ordered data mode
[   49.119834] ReiserFS: sda3: journal params: device sda3, size 8192, journal 
first block 18, max trans len 1024, max batch 900, max commit age 30, max 
trans age 30
[   49.120720] ReiserFS: sda3: checking transaction log (sda3)
[   49.164140] ReiserFS: sda3: Using r5 hash to sort names
[   49.164190] VFS: Mounted root (reiserfs filesystem) readonly.
[   49.164240] Freeing unused kernel memory: 176k freed
[   49.991435] Clocksource tsc unstable (delta = -75286349 ns)
[   51.294824] ReiserFS: sda3: switching to journaled data mode
[   51.391705] r8169 Gigabit Ethernet driver 2.2LK loaded
[   51.391911] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   51.391916] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 
(level, low) -> IRQ 19
[   51.391925] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   51.392071] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, 
XID 38000000 IRQ 314
[   51.398432] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   51.398438] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 
(level, low) -> IRQ 22
[   51.398587] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   51.398590] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   51.398660] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus 
number 1
[   51.398681] ehci_hcd 0000:00:02.1: debug port 1
[   51.398683] PCI: cache line size of 64 is not supported by device 
0000:00:02.1
[   51.398690] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   51.400946] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 
Dec 2004
[   51.401020] usb usb1: configuration #1 chosen from 1 choice
[   51.401035] hub 1-0:1.0: USB hub found
[   51.401041] hub 1-0:1.0: 10 ports detected
[   51.511466] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   51.553322] usb 1-3: configuration #1 chosen from 1 choice
[   51.553781] hub 1-3:1.0: USB hub found
[   51.553892] hub 1-3:1.0: 4 ports detected
[   51.553958] reiser4: sdb2: found disk format 4.0.0.
[   51.650220] usb 1-3.1: new low speed USB device using ehci_hcd and address 
3
[   51.680243] usb 1-3.1: configuration #1 chosen from 1 choice
[   51.683964] input: Logitech USB Receiver as /class/input/input3
[   51.689218] input: USB HID v1.11 Mouse [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   51.691381] input: Logitech USB Receiver as /class/input/input4
[   51.706973] input: USB HID v1.11 Device [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   51.715844] mice: PS/2 mouse device common for all mice
[   59.998812] reiser4: sda6: found disk format 4.0.0.
[   60.447503] reiser4: sdb1: found disk format 4.0.0.
[   60.800499] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 
across:1951888k
[   62.060963] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   62.060969] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 
(level, low) -> IRQ 18
[   62.062060] Audigy2 value: Special config.
[   63.523122] w83627ehf: Found W83627EHG chip at 0x290
[   64.564529] r8169: eth0: link up
[   64.564610] r8169: eth0: link up
[   65.034897] NET: Registered protocol family 17
--------------------------------------------------------------------------------------

Non-Raid, reboot with nomsi:

[    0.000000] Linux version 2.6.24.3reiser4mcp65patch (root@energy) (gcc 
version 4.2.3 (Gentoo 4.2.3 p1.0)) #1 SMP Wed Apr 2 07:31:52 CEST 2008
[    0.000000] Command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 
console=tty6
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98E0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT  12000731 MSFT       
97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       
97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19186      186 INTL 
20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC  12000731 MSFT       
97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG  12000731 MSFT       
97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM  12000731 MSFT       
97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0 12000731 MSFT       
97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         
1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] No mptable found.
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 853 pages reserved
[    0.000000]   DMA zone: 3090 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 
00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 
00000000000e6000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e6000 - 
0000000000100000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffb0000 - 
00000000cffc0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cffc0000 - 
00000000cfff0000
[    0.000000] swsusp: Registered nosave memory region: 00000000cfff0000 - 
00000000d0000000
[    0.000000] swsusp: Registered nosave memory region: 00000000d0000000 - 
00000000fec00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec00000 - 
00000000fec01000
[    0.000000] swsusp: Registered nosave memory region: 00000000fec01000 - 
00000000fee00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fee00000 - 
00000000fef00000
[    0.000000] swsusp: Registered nosave memory region: 00000000fef00000 - 
00000000ff380000
[    0.000000] swsusp: Registered nosave memory region: 00000000ff380000 - 
0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: 
d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 31408 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 1030522
[    0.000000] Kernel command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 
console=tty6
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] hpet clockevent registered
[    0.000000] TSC calibrated against HPET
[   30.333692] Marking TSC unstable due to TSCs unsynchronized
[   30.333693] time.c: Detected 3013.886 MHz processor.
[   30.337517] Console: colour VGA+ 80x25
[   30.337519] console [tty6] enabled
[   30.342147] Dentry cache hash table entries: 524288 (order: 10, 4194304 
bytes)
[   30.344375] Inode-cache hash table entries: 262144 (order: 9, 2097152 
bytes)
[   30.345145] Checking aperture...
[   30.345183] CPU 0: aperture @ 8000000 size 32 MB
[   30.345220] Aperture too small (32 MB)
[   30.351101] No AGP bridge found
[   30.351137] Your BIOS doesn't leave a aperture memory hole
[   30.351175] Please enable the IOMMU option in the BIOS setup
[   30.351213] This costs you 64 MB of RAM
[   30.376449] Mapping aperture over 65536 KB of RAM @ 8000000
[   30.400565] Memory: 4049948k/4980736k available (2192k kernel code, 143428k 
reserved, 681k data, 176k init)
[   30.400634] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, 
Nodes=1
[   30.483342] Calibrating delay using timer specific routine.. 6034.68 
BogoMIPS (lpj=10053900)
[   30.483434] Mount-cache hash table entries: 256
[   30.483541] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   30.483581] CPU: L2 Cache: 1024K (64 bytes/line)
[   30.483619] CPU: Physical Processor ID: 0
[   30.483655] CPU: Processor Core ID: 0
[   30.483708] SMP alternatives: switching to UP code
[   30.484071] ACPI: Core revision 20070126
[   30.519247] Using local APIC timer interrupts.
[   30.552391] APIC timer calibration result 12557863
[   30.552393] Detected 12.557 MHz APIC timer.
[   30.552477] SMP alternatives: switching to SMP code
[   30.552707] Booting processor 1/2 APIC 0x1
[   30.562854] Initializing CPU#1
[   30.645618] Calibrating delay using timer specific routine.. 6030.92 
BogoMIPS (lpj=10046281)
[   30.645622] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[   30.645624] CPU: L2 Cache: 1024K (64 bytes/line)
[   30.645625] CPU: Physical Processor ID: 0
[   30.645626] CPU: Processor Core ID: 1
[   30.645707] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[   30.645734] Brought up 2 CPUs
[   30.646193] net_namespace: 120 bytes
[   30.646424] NET: Registered protocol family 16
[   30.646536] ACPI: bus type pci registered
[   30.646618] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[   30.646657] PCI: Not using MMCONFIG.
[   30.646693] PCI: Using configuration type 1
[   30.648936] ACPI: EC: Look up EC in DSDT
[   30.652388] ACPI: Interpreter enabled
[   30.652425] ACPI: (supports S0 S1 S3 S4 S5)
[   30.652595] ACPI: Using IOAPIC for interrupt routing
[   30.652803] Error attaching device data
[   30.652842] Error attaching device data
[   30.652881] Error attaching device data
[   30.652920] Error attaching device data
[   30.657832] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   30.658369] PCI: Transparent bridge - 0000:00:08.0
[   30.658669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   30.658801] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[   30.658898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[   30.658954] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[   30.659009] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[   30.659064] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[   30.663003] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[   30.663339] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[   30.663674] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, 
disabled.
[   30.664034] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, 
disabled.
[   30.664394] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, 
disabled.
[   30.664754] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[   30.665088] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, 
disabled.
[   30.665448] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[   30.665785] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[   30.666120] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, 
disabled.
[   30.666480] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[   30.666814] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, 
disabled.
[   30.667174] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, 
disabled.
[   30.667535] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[   30.667869] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, 
disabled.
[   30.668230] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[   30.668564] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, 
disabled.
[   30.668962] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, 
disabled.
[   30.669322] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, 
disabled.
[   30.669683] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, 
disabled.
[   30.670002] Linux Plug and Play Support v0.97 (c) Adam Belay
[   30.670055] pnp: PnP ACPI init
[   30.670095] ACPI: bus type pnp registered
[   30.672633] pnp: PnP ACPI: found 13 devices
[   30.672670] ACPI: ACPI bus type pnp unregistered
[   30.672792] SCSI subsystem initialized
[   30.672849] libata version 3.00 loaded.
[   30.672899] usbcore: registered new interface driver usbfs
[   30.672955] usbcore: registered new interface driver hub
[   30.673012] usbcore: registered new device driver usb
[   30.673096] PCI: Using ACPI for IRQ routing
[   30.673134] PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
[   30.682185] PCI-DMA: Disabling AGP.
[   30.682921] PCI-DMA: aperture base @ 8000000 size 65536 KB
[   30.682963] PCI-DMA: using GART IOMMU.
[   30.683002] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   30.683161] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[   30.683301] hpet0: 3 32-bit timers, 25000000 Hz
[   30.685470] Time: hpet clocksource has been installed.
[   30.685519] Switched to high resolution mode on CPU 0
[   30.685636] Switched to high resolution mode on CPU 1
[   30.692202] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[   30.695597] system 00:05: ioport range 0x800-0x80f has been reserved
[   30.695637] system 00:05: ioport range 0x2000-0x207f has been reserved
[   30.695676] system 00:05: ioport range 0x2080-0x20ff has been reserved
[   30.695715] system 00:05: ioport range 0x2400-0x247f has been reserved
[   30.695755] system 00:05: ioport range 0x2480-0x24ff has been reserved
[   30.695794] system 00:05: ioport range 0x2800-0x287f has been reserved
[   30.695833] system 00:05: ioport range 0x2880-0x28ff has been reserved
[   30.695873] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[   30.695912] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[   30.695952] system 00:05: iomem range 0x0-0x0 could not be reserved
[   30.695991] system 00:05: iomem range 0xfee01000-0xfeefffff has been 
reserved
[   30.696035] system 00:07: iomem range 0xfec00000-0xfec00fff could not be 
reserved
[   30.696082] system 00:07: iomem range 0xfee00000-0xfee00fff could not be 
reserved
[   30.696133] system 00:0a: ioport range 0x290-0x29f has been reserved
[   30.696176] system 00:0b: iomem range 0xe0000000-0xefffffff has been 
reserved
[   30.696221] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[   30.696260] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[   30.696300] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[   30.696342] system 00:0c: iomem range 0x100000-0xcfffffff could not be 
reserved
[   30.696389] system 00:0c: iomem range 0xff380000-0xffffffff could not be 
reserved
[   30.696671] PCI: Bridge: 0000:00:08.0
[   30.696708]   IO window: d000-dfff
[   30.696746]   MEM window: f9f00000-f9ffffff
[   30.696783]   PREFETCH window: disabled.
[   30.696821] PCI: Bridge: 0000:00:0b.0
[   30.696857]   IO window: c000-cfff
[   30.696894]   MEM window: f9e00000-f9efffff
[   30.696930]   PREFETCH window: disabled.
[   30.696967] PCI: Bridge: 0000:00:0c.0
[   30.697003]   IO window: disabled.
[   30.697040]   MEM window: disabled.
[   30.697076]   PREFETCH window: disabled.
[   30.697113] PCI: Bridge: 0000:00:0d.0
[   30.697150]   IO window: e000-efff
[   30.697186]   MEM window: fa000000-febfffff
[   30.697223]   PREFETCH window: d0000000-dfffffff
[   30.697261] PCI: Bridge: 0000:00:0e.0
[   30.697297]   IO window: disabled.
[   30.697333]   MEM window: disabled.
[   30.697370]   PREFETCH window: disabled.
[   30.697413] PCI: Setting latency timer of device 0000:00:08.0 to 64
[   30.697421] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   30.697426] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   30.697431] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   30.697436] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   30.697442] NET: Registered protocol family 2
[   30.728769] IP route cache hash table entries: 131072 (order: 8, 1048576 
bytes)
[   30.729365] TCP established hash table entries: 262144 (order: 10, 4194304 
bytes)
[   30.730789] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[   30.731276] TCP: Hash tables configured (established 262144 bind 65536)
[   30.731316] TCP reno registered
[   30.739550] Loading Reiser4. See www.namesys.com for a description of 
Reiser4.
[   30.739654] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
254)
[   30.739702] io scheduler noop registered
[   30.739740] io scheduler cfq registered (default)
[   30.740435] Boot video device is 0000:04:00.0
[   30.740539] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[   30.740557] assign_interrupt_mode Found MSI capability
[   30.740598] Allocate Port Service[0000:00:0b.0:pcie00]
[   30.740641] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[   30.740658] assign_interrupt_mode Found MSI capability
[   30.740696] Allocate Port Service[0000:00:0c.0:pcie00]
[   30.740734] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[   30.740750] assign_interrupt_mode Found MSI capability
[   30.740789] Allocate Port Service[0000:00:0d.0:pcie00]
[   30.740828] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[   30.740844] assign_interrupt_mode Found MSI capability
[   30.740883] Allocate Port Service[0000:00:0e.0:pcie00]
[   30.741057] input: Power Button (FF) as /class/input/input0
[   30.741096] ACPI: Power Button (FF) [PWRF]
[   30.741181] input: Power Button (CM) as /class/input/input1
[   30.741219] ACPI: Power Button (CM) [PWRB]
[   30.741353] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   30.741458] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor 
Device is not present [20070126]
[   30.765391] Real Time Clock Driver v1.12ac
[   30.765510] hpet_resources: 0xfed00000 is busy
[   30.765527] Linux agpgart interface v0.102
[   30.765612] Driver 'sd' needs updating - please use bus_type methods
[   30.765685] ahci 0000:00:0a.0: version 3.0
[   30.765860] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[   30.765904] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[   31.766438] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl IDE mode
[   31.766489] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[   31.766529] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[   31.766731] scsi0 : ahci
[   31.766827] scsi1 : ahci
[   31.766893] scsi2 : ahci
[   31.766959] scsi3 : ahci
[   31.767048] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 23
[   31.767095] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 23
[   31.767143] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 23
[   31.767190] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 23
[   31.767244] ata1: hard resetting link
[   37.400855] ata1: port is slow to respond, please be patient (Status 0xd0)
[   41.764704] ata1: softreset failed (device not ready)
[   41.764742] ata1: hard resetting link
[   42.396665] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   42.397323] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[   42.397366] ata1.00: 312581808 sectors, multi 16: LBA48 
[   42.398017] ata1.00: configured for UDMA/133
[   42.398055] ata1: EH complete
[   42.398038] ata2: hard resetting link
[   43.028625] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   43.030633] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[   43.030672] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   43.032670] ata2.00: configured for UDMA/133
[   43.032708] ata2: EH complete
[   43.032689] ata3: hard resetting link
[   43.351257] ata3: SATA link down (SStatus 0 SControl 300)
[   43.351297] ata3: EH complete
[   43.351335] ata4: hard resetting link
[   43.670563] ata4: SATA link down (SStatus 0 SControl 300)
[   43.670602] ata4: EH complete
[   43.670687] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[   43.670797] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   43.670841] sd 0:0:0:0: [sda] Write Protect is off
[   43.670879] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   43.670887] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   43.670957] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[   43.671000] sd 0:0:0:0: [sda] Write Protect is off
[   43.671038] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   43.671045] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   43.671095]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[   43.702464] sd 0:0:0:0: [sda] Attached SCSI disk
[   43.702599] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[   43.702708] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   43.702752] sd 1:0:0:0: [sdb] Write Protect is off
[   43.702790] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   43.702799] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   43.702869] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[   43.702912] sd 1:0:0:0: [sdb] Write Protect is off
[   43.702949] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   43.702957] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[   43.703006]  sdb: sdb1 sdb2
[   43.783458] sd 1:0:0:0: [sdb] Attached SCSI disk
[   43.783595] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 
irq 1,12
[   43.786170] serio: i8042 KBD port at 0x60,0x64 irq 1
[   43.786210] serio: i8042 AUX port at 0x60,0x64 irq 12
[   43.811212] usbcore: registered new interface driver usbhid
[   43.811251] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[   43.811295] TCP cubic registered
[   43.811334] NET: Registered protocol family 1
[   43.811388] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 
6000+ processors (2 cpu cores) (version 2.20.00)
[   43.811406] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[   43.811445] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[   43.811483] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[   43.811522] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[   43.811560] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[   43.811598] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[   43.811636] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[   43.811674] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[   43.838200] input: AT Translated Set 2 keyboard as /class/input/input2
[   43.931524] ReiserFS: sda3: found reiserfs format "3.6" with standard 
journal
[   43.931567] ReiserFS: sda3: using ordered data mode
[   43.941099] ReiserFS: sda3: journal params: device sda3, size 8192, journal 
first block 18, max trans len 1024, max batch 900, max commit age 30, max 
trans age 30
[   43.941987] ReiserFS: sda3: checking transaction log (sda3)
[   43.993714] ReiserFS: sda3: Using r5 hash to sort names
[   43.993765] VFS: Mounted root (reiserfs filesystem) readonly.
[   43.993815] Freeing unused kernel memory: 176k freed
[   44.971314] Clocksource tsc unstable (delta = -333322752 ns)
[   46.105770] ReiserFS: sda3: switching to journaled data mode
[   46.199182] r8169 Gigabit Ethernet driver 2.2LK loaded
[   46.199389] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[   46.199394] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 
(level, low) -> IRQ 19
[   46.199403] PCI: Setting latency timer of device 0000:01:00.0 to 64
[   46.199408] r8169 0000:01:00.0: no MSI. Back to INTx.
[   46.199532] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, 
XID 38000000 IRQ 19
[   46.205916] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[   46.205922] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 
(level, low) -> IRQ 22
[   46.206070] PCI: Setting latency timer of device 0000:00:02.1 to 64
[   46.206073] ehci_hcd 0000:00:02.1: EHCI Host Controller
[   46.206147] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus 
number 1
[   46.206168] ehci_hcd 0000:00:02.1: debug port 1
[   46.206171] PCI: cache line size of 64 is not supported by device 
0000:00:02.1
[   46.206177] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[   46.209018] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 
Dec 2004
[   46.209099] usb usb1: configuration #1 chosen from 1 choice
[   46.209115] hub 1-0:1.0: USB hub found
[   46.209121] hub 1-0:1.0: 10 ports detected
[   46.318388] usb 1-3: new high speed USB device using ehci_hcd and address 2
[   46.360226] usb 1-3: configuration #1 chosen from 1 choice
[   46.360310] hub 1-3:1.0: USB hub found
[   46.360421] hub 1-3:1.0: 4 ports detected
[   46.361379] reiser4: sdb2: found disk format 4.0.0.
[   46.457125] usb 1-3.1: new low speed USB device using ehci_hcd and address 
3
[   46.487187] usb 1-3.1: configuration #1 chosen from 1 choice
[   46.490723] input: Logitech USB Receiver as /class/input/input3
[   46.496916] input: USB HID v1.11 Mouse [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   46.498954] input: Logitech USB Receiver as /class/input/input4
[   46.514984] input: USB HID v1.11 Device [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[   46.523874] mice: PS/2 mouse device common for all mice
[   54.781342] reiser4: sda6: found disk format 4.0.0.
[   55.243478] reiser4: sdb1: found disk format 4.0.0.
[   55.613500] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 
across:1951888k
[   56.942240] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   56.942246] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 
(level, low) -> IRQ 18
[   56.943338] Audigy2 value: Special config.
[   58.501961] w83627ehf: Found W83627EHG chip at 0x290
[   59.483214] r8169: eth0: link up
[   59.483219] r8169: eth0: link up
[   60.168060] NET: Registered protocol family 17


In short, no changes at all.

If you need more information, please tell me so.

Glück Auf,
Volker

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-02 17:09                             ` Volker Armin Hemmann
@ 2008-04-03  1:48                               ` Tejun Heo
  2008-04-03  5:04                                 ` Volker Armin Hemmann
  2008-04-03 10:44                                 ` Peer Chen
  0 siblings, 2 replies; 52+ messages in thread
From: Tejun Heo @ 2008-04-03  1:48 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide, Peer Chen, Kuan Luo

Hello, Volker.

Volker Armin Hemmann wrote:
> On Mittwoch, 2. April 2008, Tejun Heo wrote:
>> Volker Armin Hemmann wrote:
>>> On Mittwoch, 19. März 2008, Tejun Heo wrote:
>>>> Volker Armin Hemmann wrote:
>>>>> On Mittwoch, 19. März 2008, Tejun Heo wrote:
>>>>>> x UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200
>>>>>>
>>>>>>> irq 315
>>>>>>> [   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port
>>>>>>> 0xf9dfc280 irq 315
>>>>>>> [   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>>>>> [   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max
>>>>>>> UDMA/133 [   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
>>>>>>> [   38.598405] ata1.00: configured for UDMA/133
>>>>>>> [   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>>>>> [   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
>>>>>>> [   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
>>>>>>> 0/32) [   39.086268] ata2.00: configured for UDMA/133
>>>>>> So, just to confirm.  With the updated patch, you don't see any
>>>>>> problem, right?
>>>>> Correct. With the updated patch I don't see problems in 'non-raid'
>>>>> mode. AHCI mode still has problems without nosmi. But that is an
>>>>> entirely different problem, right?
>>>> Yeap, can you please post the result of "lspci -nn"?
>>> with AHCI+nosmi, 2.6.24.3:
>>> 00:0a.0 SATA controller [0106]: nVidia Corporation MCP65 AHCI Controller
>>> [10de:044d] (rev a1)
>> Sorry about the long delay.  Can you please test the attached patch in
>> both ahci and non-ahci modes w/o pci=nomsi and post resulting boot logs?
> 
> patch -p1 < /home/energyman/mcp65-ahci-debug.patch
> patching file drivers/ata/libata-core.c
> Hunk #1 succeeded at 7136 (offset 2 lines).
> patching file drivers/ata/libata-eh.c
> Hunk #1 succeeded at 2083 (offset -107 lines).
> patching file drivers/pci/quirks.c
> Hunk #1 succeeded at 1733 with fuzz 1 (offset -122 lines).
> 
> saved config, removed linux-2.6.24.3, unpacked 2.6.24.3 from tarball, reiser4 
> and your patch, make oldconfig, make menuconfig, make all modules_install 
> install.
> 
> dmesgs are below. 
[--snip--]
> In short, no changes at all.

Thanks for confirming.

Peer, Kuan.  Volker is reporting detection problems on MCP65 AHCI.
The followings are what we've discovered till now.

1. When the controller is put into non-raid mode in BIOS

  * If softreset is used, either the softreset itself or IDENTIFY
    following it times out once.  On retrial, it works fine.  It
    doesn't matter whether the SRST is issued by itself or as
    follow-up-srst after hardreset.  Using only hardreset works fine.

  * The controller doesn't indicate MSI capability and MSI isn't used
    by default.

2. When the controller is put into ahci mode in BIOS

  * SRST works fine.

  * The controller indicates MSI capability but MSI doesn't work
    properly resulting in IRQ delivery failure.  Adding
    intx_disable_bug quirk doesn't help.

I've performed similar test on MCP67 and everything worked fine on it.

Both problems (SRST and MSI) can be worked around but I need more
information to work around those.

* Which chips are affected?  Are there proper fixes?

* For the MSI problem, is it system wide problem or local to the ahci
  controller?

Thanks.

-- 
tejun

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-03  1:48                               ` Tejun Heo
@ 2008-04-03  5:04                                 ` Volker Armin Hemmann
  2008-04-03  5:26                                   ` Tejun Heo
  2008-04-03 10:44                                 ` Peer Chen
  1 sibling, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-03  5:04 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide, Peer Chen, Kuan Luo

Hi,

On Donnerstag, 3. April 2008, Tejun Heo wrote:
> Hello, Volker.
>
> Volker Armin Hemmann wrote:
> > On Mittwoch, 2. April 2008, Tejun Heo wrote:
> >> Volker Armin Hemmann wrote:
> >>> On Mittwoch, 19. März 2008, Tejun Heo wrote:
> >>>> Volker Armin Hemmann wrote:
> >>>>> On Mittwoch, 19. März 2008, Tejun Heo wrote:
> >>>>>> x UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200
> >>>>>>
> >>>>>>> irq 315
> >>>>>>> [   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port
> >>>>>>> 0xf9dfc280 irq 315
> >>>>>>> [   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl
> >>>>>>> 300) [   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01,
> >>>>>>> max UDMA/133 [   38.597775] ata1.00: 312581808 sectors, multi 16:
> >>>>>>> LBA48 [   38.598405] ata1.00: configured for UDMA/133
> >>>>>>> [   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl
> >>>>>>> 300) [   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max
> >>>>>>> UDMA7 [   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48
> >>>>>>> NCQ (depth 0/32) [   39.086268] ata2.00: configured for UDMA/133
> >>>>>>
> >>>>>> So, just to confirm.  With the updated patch, you don't see any
> >>>>>> problem, right?
> >>>>>
> >>>>> Correct. With the updated patch I don't see problems in 'non-raid'
> >>>>> mode. AHCI mode still has problems without nosmi. But that is an
> >>>>> entirely different problem, right?
> >>>>
> >>>> Yeap, can you please post the result of "lspci -nn"?
> >>>
> >>> with AHCI+nosmi, 2.6.24.3:
> >>> 00:0a.0 SATA controller [0106]: nVidia Corporation MCP65 AHCI
> >>> Controller [10de:044d] (rev a1)
> >>
> >> Sorry about the long delay.  Can you please test the attached patch in
> >> both ahci and non-ahci modes w/o pci=nomsi and post resulting boot logs?
> >
> > patch -p1 < /home/energyman/mcp65-ahci-debug.patch
> > patching file drivers/ata/libata-core.c
> > Hunk #1 succeeded at 7136 (offset 2 lines).
> > patching file drivers/ata/libata-eh.c
> > Hunk #1 succeeded at 2083 (offset -107 lines).
> > patching file drivers/pci/quirks.c
> > Hunk #1 succeeded at 1733 with fuzz 1 (offset -122 lines).
> >
> > saved config, removed linux-2.6.24.3, unpacked 2.6.24.3 from tarball,
> > reiser4 and your patch, make oldconfig, make menuconfig, make all
> > modules_install install.
> >
> > dmesgs are below.
>
> [--snip--]
>
> > In short, no changes at all.
>
> Thanks for confirming.
>
> Peer, Kuan.  Volker is reporting detection problems on MCP65 AHCI.
> The followings are what we've discovered till now.
>
> 1. When the controller is put into non-raid mode in BIOS
>
>   * If softreset is used, either the softreset itself or IDENTIFY
>     following it times out once.  On retrial, it works fine.  It
>     doesn't matter whether the SRST is issued by itself or as
>     follow-up-srst after hardreset.  Using only hardreset works fine.
>
>   * The controller doesn't indicate MSI capability and MSI isn't used
>     by default.
>
> 2. When the controller is put into ahci mode in BIOS
>
>   * SRST works fine.
>
>   * The controller indicates MSI capability but MSI doesn't work
>     properly resulting in IRQ delivery failure.  Adding
>     intx_disable_bug quirk doesn't help.
>
> I've performed similar test on MCP67 and everything worked fine on it.
>
> Both problems (SRST and MSI) can be worked around but I need more
> information to work around those.
>
> * Which chips are affected?  Are there proper fixes?
>
> * For the MSI problem, is it system wide problem or local to the ahci
>   controller?


I rebooted with non-raid set, without pci=nomsi

this is cat /proc/interrupts:
          CPU0       CPU1
  0:         57          1   IO-APIC-edge      timer
  1:          0         81   IO-APIC-edge      i8042
  8:          0          1   IO-APIC-edge      rtc
  9:          0          1   IO-APIC-fasteoi   acpi
 12:          0          3   IO-APIC-edge      i8042
 17:          2       2868   IO-APIC-fasteoi   nvidia
 18:          0          0   IO-APIC-fasteoi   EMU10K1
 22:          4        745   IO-APIC-fasteoi   ehci_hcd:usb1
314:          0        158   PCI-MSI-edge      eth0
315:          7      12769   PCI-MSI-edge      ahci
NMI:          0          0   Non-maskable interrupts
LOC:      12308      14343   Local timer interrupts
RES:       2994       1456   Rescheduling interrupts
CAL:        559         59   function call interrupts
TLB:        323        245   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
SPU:          0          0   Spurious interrupts
ERR:          0

as you can see, only the sata controller and the network uses msi.

And networking works - or I wouldn't be able to send you this mail.

lspci -vv:
00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
        Subsystem: ASRock Incorporation Unknown device 0444
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [44] HyperTransport: Slave or Primary Interface
                Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
                Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- 
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
                Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- 
LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
                Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ 
<CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
                Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit 
DwFcInEn- LWO=8bit DwFcOutEn-
                Revision ID: 1.03
                Link Frequency 0: 800MHz
                Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 
600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- 
UIDRD-
                Link Frequency 1: 200MHz
                Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 
600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- 
SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
                Prefetchable memory behind bridge Upper: 00-00
                Bus Number: 00
        Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
                Mapping Address Base: 00000000fee00000

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2)
        Subsystem: ASRock Incorporation Unknown device 0441
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Region 0: I/O ports at 2f00 [size=256]

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
        Subsystem: ASRock Incorporation Unknown device 0446
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at bc00 [size=64]
        Region 4: I/O ports at 2d00 [size=64]
        Region 5: I/O ports at 2e00 [size=64]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel modules: i2c-nforce2

00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
        Subsystem: ASRock Incorporation Unknown device 0446
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) 
(prog-if 10 [OHCI])
        Subsystem: ASRock Incorporation Unknown device 0454
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at f9dff000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel modules: ohci-hcd

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) 
(prog-if 20 [EHCI])
        Subsystem: ASRock Incorporation Unknown device 0455
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin B routed to IRQ 22
        Region 0: Memory at f9dfec00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port: BAR=1 offset=0098
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) (prog-if 01 
[Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: f9f00000-f9ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
        Capabilities: [b8] Subsystem: ASRock Incorporation Unknown device 0449
        Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
                Mapping Address Base: 00000000fee00000

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) (prog-if 8a 
[Master SecP PriP])
        Subsystem: ASRock Incorporation Unknown device 0448
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) 
[disabled] [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) 
[disabled] [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) 
[disabled] [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) 
[disabled] [size=1]
        Region 4: I/O ports at ffa0 [size=16]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a1) 
(prog-if 85 [Master SecO PriO])
        Subsystem: ASRock Incorporation Unknown device 045d
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 315
        Region 0: I/O ports at 0e00 [size=8]
        Region 1: I/O ports at 0e20 [size=4]
        Region 2: I/O ports at 0e40 [size=8]
        Region 3: I/O ports at 0e60 [size=4]
        Region 4: I/O ports at a800 [size=16]
        Region 5: Memory at f9dfc000 (32-bit, non-prefetchable) [size=8K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/3 Enable+
                Address: 00000000fee0300c  Data: 4171
        Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
        Kernel driver in use: ahci

00:0b.0 PCI bridge: nVidia Corporation Unknown device 045b (rev a1) (prog-if 
00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: f9e00000-f9efffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Subsystem: ASRock Incorporation Unknown device 045b
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/1 Enable+
                Address: 00000000fee0300c  Data: 4149
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
                Mapping Address Base: 00000000fee00000
        Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #3, Speed 2.5GT/s, Width x2, ASPM L0s L1, Latency 
L0 <512ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surpise-
                        Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Off, PwrInd On, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Kernel driver in use: pcieport-driver

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) 
(prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Subsystem: ASRock Incorporation Unknown device 045a
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/1 Enable+
                Address: 00000000fee0300c  Data: 4151
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
                Mapping Address Base: 00000000fee00000
        Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 <512ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x2, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surpise-
                        Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Off, PwrInd On, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Kernel driver in use: pcieport-driver

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) 
(prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 0000e000-0000efff
        Memory behind bridge: fa000000-febfffff
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Subsystem: ASRock Incorporation Unknown device 0458
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/1 Enable+
                Address: 00000000fee0300c  Data: 4159
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
                Mapping Address Base: 00000000fee00000
        Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, 
Latency L0 <512ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surpise-
                        Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Off, PwrInd On, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet+ LinkState+
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Kernel driver in use: pcieport-driver

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) 
(prog-if 00 [Normal decode])
        Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Subsystem: ASRock Incorporation Unknown device 0459
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/1 Enable+
                Address: 00000000fee0300c  Data: 4161
        Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
                Mapping Address Base: 00000000fee00000
        Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 <512ns, L1 <4us
                        ClockPM- Suprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surpise-
                        Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Off, PwrInd On, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Kernel driver in use: pcieport-driver

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: [80] HyperTransport: Host or Secondary Interface
                !!! Possibly incomplete decoding
                Command: WarmRst+ DblEnd-
                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- 
<CRCErr=0
                Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
                Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM 
Controller
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Capabilities: [f0] Secure device <?>
        Kernel driver in use: k8temp
        Kernel modules: k8temp

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI 
Express Gigabit Ethernet controller (rev 01)
        Subsystem: ASRock Incorporation Unknown device 8168
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 314
        Region 0: I/O ports at c800 [size=256]
        Region 2: Memory at f9eff000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at f9ec0000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [48] Vital Product Data <?>
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/1 Enable+
                Address: 00000000fee0300c  Data: 4181
        Capabilities: [60] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s 
<128ns, L1 unlimited
                        ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 
unlimited, L1 unlimited
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- 
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [84] Vendor Specific Information <?>
        Kernel driver in use: r8169
        Kernel modules: r8169

02:08.0 SCSI storage controller: Adaptec AHA-2944UW / AIC-7884U (rev 01)
        Subsystem: Adaptec Unknown device 7884
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (2000ns min, 2000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at d800 [size=256]
        Region 1: Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]
        Expansion ROM at f9f00000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 1
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel modules: aic7xxx

02:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
        Subsystem: Creative Labs Unknown device 1001
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (500ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at dc00 [size=64]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: EMU10K1_Audigy
        Kernel modules: snd-emu10k1

04:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev 
a1) (prog-if 00 [VGA controller])
        Subsystem: nVidia Corporation Unknown device 0439
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
        Region 5: I/O ports at ec00 [size=128]
        [virtual] Expansion ROM at febe0000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ 
Queue=0/0 Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [78] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <4us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, 
Latency L0 <512ns, L1 <4us
                        ClockPM- Suprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- 
CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
        Kernel driver in use: nvidia
        Kernel modules: nvidia

I will reboot from systemresucecd later today and post some results with 
ahci-mode set, no nomsi. Just can't try patches that way.

Glück Auf,
Volker

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-03  5:04                                 ` Volker Armin Hemmann
@ 2008-04-03  5:26                                   ` Tejun Heo
  2008-04-03 11:47                                     ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Tejun Heo @ 2008-04-03  5:26 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide, Peer Chen, Kuan Luo

Hello, Volker.

Volker Armin Hemmann wrote:
>>> In short, no changes at all.
>> Thanks for confirming.
>>
>> Peer, Kuan.  Volker is reporting detection problems on MCP65 AHCI.
>> The followings are what we've discovered till now.
>>
>> 1. When the controller is put into non-raid mode in BIOS
>>
>>   * If softreset is used, either the softreset itself or IDENTIFY
>>     following it times out once.  On retrial, it works fine.  It
>>     doesn't matter whether the SRST is issued by itself or as
>>     follow-up-srst after hardreset.  Using only hardreset works fine.
>>
>>   * The controller doesn't indicate MSI capability and MSI isn't used
>>     by default.
>>
>> 2. When the controller is put into ahci mode in BIOS
>>
>>   * SRST works fine.
>>
>>   * The controller indicates MSI capability but MSI doesn't work
>>     properly resulting in IRQ delivery failure.  Adding
>>     intx_disable_bug quirk doesn't help.
>>
>> I've performed similar test on MCP67 and everything worked fine on it.
>>
>> Both problems (SRST and MSI) can be worked around but I need more
>> information to work around those.
>>
>> * Which chips are affected?  Are there proper fixes?
>>
>> * For the MSI problem, is it system wide problem or local to the ahci
>>   controller?
> 
> 
> I rebooted with non-raid set, without pci=nomsi
> 
> this is cat /proc/interrupts:
>           CPU0       CPU1
>   0:         57          1   IO-APIC-edge      timer
>   1:          0         81   IO-APIC-edge      i8042
>   8:          0          1   IO-APIC-edge      rtc
>   9:          0          1   IO-APIC-fasteoi   acpi
>  12:          0          3   IO-APIC-edge      i8042
>  17:          2       2868   IO-APIC-fasteoi   nvidia
>  18:          0          0   IO-APIC-fasteoi   EMU10K1
>  22:          4        745   IO-APIC-fasteoi   ehci_hcd:usb1
> 314:          0        158   PCI-MSI-edge      eth0
> 315:          7      12769   PCI-MSI-edge      ahci
> 
> as you can see, only the sata controller and the network uses msi.
> 
> And networking works - or I wouldn't be able to send you this mail.

I guess the ahci controller works too.  This is getting confusing, so 
MSI doesn't work iff the controller is configured as ahci in BIOS?

> I will reboot from systemresucecd later today and post some results with 
> ahci-mode set, no nomsi. Just can't try patches that way.

Is sytemrescuecd using the same kernel?  Otherwise, it will only add 
more to the confusion.

-- 
tejun

^ permalink raw reply	[flat|nested] 52+ messages in thread

* RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-03  1:48                               ` Tejun Heo
  2008-04-03  5:04                                 ` Volker Armin Hemmann
@ 2008-04-03 10:44                                 ` Peer Chen
  2008-04-11  6:06                                   ` Tejun Heo
  1 sibling, 1 reply; 52+ messages in thread
From: Peer Chen @ 2008-04-03 10:44 UTC (permalink / raw)
  To: Tejun Heo, Volker Armin Hemmann; +Cc: linux-kernel, linux-ide, Kuan Luo

I didn't find this issue on my MCP65 board but my chip revision is 0xa3 and yours is 0xa1, I'll try to find if there is any useful information between two version chip for this issue.

BRs
Peer Chen
-----Original Message-----
From: Tejun Heo [mailto:htejun@gmail.com] 
Sent: Thursday, April 03, 2008 9:48 AM
To: Volker Armin Hemmann
Cc: linux-kernel@vger.kernel.org; linux-ide@vger.kernel.org; Peer Chen; Kuan Luo
Subject: Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3

Hello, Volker.

Volker Armin Hemmann wrote:
> On Mittwoch, 2. April 2008, Tejun Heo wrote:
>> Volker Armin Hemmann wrote:
>>> On Mittwoch, 19. März 2008, Tejun Heo wrote:
>>>> Volker Armin Hemmann wrote:
>>>>> On Mittwoch, 19. März 2008, Tejun Heo wrote:
>>>>>> x UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200
>>>>>>
>>>>>>> irq 315
>>>>>>> [   38.125479] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port
>>>>>>> 0xf9dfc280 irq 315
>>>>>>> [   38.597035] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>>>>> [   38.597732] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max
>>>>>>> UDMA/133 [   38.597775] ata1.00: 312581808 sectors, multi 16: LBA48
>>>>>>> [   38.598405] ata1.00: configured for UDMA/133
>>>>>>> [   39.069342] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>>>>>>> [   39.084225] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
>>>>>>> [   39.084264] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth
>>>>>>> 0/32) [   39.086268] ata2.00: configured for UDMA/133
>>>>>> So, just to confirm.  With the updated patch, you don't see any
>>>>>> problem, right?
>>>>> Correct. With the updated patch I don't see problems in 'non-raid'
>>>>> mode. AHCI mode still has problems without nosmi. But that is an
>>>>> entirely different problem, right?
>>>> Yeap, can you please post the result of "lspci -nn"?
>>> with AHCI+nosmi, 2.6.24.3:
>>> 00:0a.0 SATA controller [0106]: nVidia Corporation MCP65 AHCI Controller
>>> [10de:044d] (rev a1)
>> Sorry about the long delay.  Can you please test the attached patch in
>> both ahci and non-ahci modes w/o pci=nomsi and post resulting boot logs?
> 
> patch -p1 < /home/energyman/mcp65-ahci-debug.patch
> patching file drivers/ata/libata-core.c
> Hunk #1 succeeded at 7136 (offset 2 lines).
> patching file drivers/ata/libata-eh.c
> Hunk #1 succeeded at 2083 (offset -107 lines).
> patching file drivers/pci/quirks.c
> Hunk #1 succeeded at 1733 with fuzz 1 (offset -122 lines).
> 
> saved config, removed linux-2.6.24.3, unpacked 2.6.24.3 from tarball, reiser4 
> and your patch, make oldconfig, make menuconfig, make all modules_install 
> install.
> 
> dmesgs are below. 
[--snip--]
> In short, no changes at all.

Thanks for confirming.

Peer, Kuan.  Volker is reporting detection problems on MCP65 AHCI.
The followings are what we've discovered till now.

1. When the controller is put into non-raid mode in BIOS

  * If softreset is used, either the softreset itself or IDENTIFY
    following it times out once.  On retrial, it works fine.  It
    doesn't matter whether the SRST is issued by itself or as
    follow-up-srst after hardreset.  Using only hardreset works fine.

  * The controller doesn't indicate MSI capability and MSI isn't used
    by default.

2. When the controller is put into ahci mode in BIOS

  * SRST works fine.

  * The controller indicates MSI capability but MSI doesn't work
    properly resulting in IRQ delivery failure.  Adding
    intx_disable_bug quirk doesn't help.

I've performed similar test on MCP67 and everything worked fine on it.

Both problems (SRST and MSI) can be worked around but I need more
information to work around those.

* Which chips are affected?  Are there proper fixes?

* For the MSI problem, is it system wide problem or local to the ahci
  controller?

Thanks.

-- 
tejun
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-03  5:26                                   ` Tejun Heo
@ 2008-04-03 11:47                                     ` Volker Armin Hemmann
  2008-04-11  6:05                                       ` Tejun Heo
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-03 11:47 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide, Peer Chen, Kuan Luo

On Donnerstag, 3. April 2008, Tejun Heo wrote:
> Hello, Volker.
>
> Volker Armin Hemmann wrote:
> >>> In short, no changes at all.
> >>
> >> Thanks for confirming.
> >>
> >> Peer, Kuan.  Volker is reporting detection problems on MCP65 AHCI.
> >> The followings are what we've discovered till now.
> >>
> >> 1. When the controller is put into non-raid mode in BIOS
> >>
> >>   * If softreset is used, either the softreset itself or IDENTIFY
> >>     following it times out once.  On retrial, it works fine.  It
> >>     doesn't matter whether the SRST is issued by itself or as
> >>     follow-up-srst after hardreset.  Using only hardreset works fine.
> >>
> >>   * The controller doesn't indicate MSI capability and MSI isn't used
> >>     by default.
> >>
> >> 2. When the controller is put into ahci mode in BIOS
> >>
> >>   * SRST works fine.
> >>
> >>   * The controller indicates MSI capability but MSI doesn't work
> >>     properly resulting in IRQ delivery failure.  Adding
> >>     intx_disable_bug quirk doesn't help.
> >>
> >> I've performed similar test on MCP67 and everything worked fine on it.
> >>
> >> Both problems (SRST and MSI) can be worked around but I need more
> >> information to work around those.
> >>
> >> * Which chips are affected?  Are there proper fixes?
> >>
> >> * For the MSI problem, is it system wide problem or local to the ahci
> >>   controller?
> >
> > I rebooted with non-raid set, without pci=nomsi
> >
> > this is cat /proc/interrupts:
> >           CPU0       CPU1
> >   0:         57          1   IO-APIC-edge      timer
> >   1:          0         81   IO-APIC-edge      i8042
> >   8:          0          1   IO-APIC-edge      rtc
> >   9:          0          1   IO-APIC-fasteoi   acpi
> >  12:          0          3   IO-APIC-edge      i8042
> >  17:          2       2868   IO-APIC-fasteoi   nvidia
> >  18:          0          0   IO-APIC-fasteoi   EMU10K1
> >  22:          4        745   IO-APIC-fasteoi   ehci_hcd:usb1
> > 314:          0        158   PCI-MSI-edge      eth0
> > 315:          7      12769   PCI-MSI-edge      ahci
> >
> > as you can see, only the sata controller and the network uses msi.
> >
> > And networking works - or I wouldn't be able to send you this mail.
>
> I guess the ahci controller works too.  This is getting confusing, so
> MSI doesn't work iff the controller is configured as ahci in BIOS?

that is correct, if I set it to 'ahci' in bios, no interrupts are delivered.

>From systemrescuecd, ahci in bios, no nomsi:
           CPU0       CPU1       
  0:        147          1   IO-APIC-edge      timer
  1:          0        607   IO-APIC-edge      i8042
  8:          0         61   IO-APIC-edge      rtc
  9:          0          1   IO-APIC-fasteoi   acpi
 12:          0          4   IO-APIC-edge      i8042
 14:          0          0   IO-APIC-edge      libata
 15:          0          0   IO-APIC-edge      libata
 18:          0         16   IO-APIC-fasteoi   aic7xxx
 21:          0          0   IO-APIC-fasteoi   ohci_hcd:usb2
 22:          2       8428   IO-APIC-fasteoi   ehci_hcd:usb1
1274:          0          0   PCI-MSI-edge      ahci
1275:          0        222   PCI-MSI-edge      eth0
NMI:          0          0   Non-maskable interrupts
LOC:      14777      16785   Local timer interrupts
RES:       7250       6100   Rescheduling interrupts
CAL:         41         52   function call interrupts
TLB:       1866       1876   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
SPU:          0          0   Spurious interrupts
ERR:          6

With my 'own' kernel, AHCI has interrupt 315. I will try and make a more 
monolithic kernel so I might be able to boot from a usb-flash device.
.
.
.
which didn't work. Hm, I am too stupid for that today...


>
> > I will reboot from systemresucecd later today and post some results with
> > ahci-mode set, no nomsi. Just can't try patches that way.
>
> Is sytemrescuecd using the same kernel?  Otherwise, it will only add
> more to the confusion.

almost.  A heavily patched 2.6.24.2. That is why I don't sent a dmesg ... just 
cat /proc/interrupts. I can send you lspci -vv and dmesg from systemrescuecd 
if you want.

Glueck Auf,
Volker




^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-03 11:47                                     ` Volker Armin Hemmann
@ 2008-04-11  6:05                                       ` Tejun Heo
  2008-04-11 11:55                                         ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Tejun Heo @ 2008-04-11  6:05 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide, Peer Chen, Kuan Luo

Volker Armin Hemmann wrote:
> From systemrescuecd, ahci in bios, no nomsi:
>            CPU0       CPU1       
>   0:        147          1   IO-APIC-edge      timer
>   1:          0        607   IO-APIC-edge      i8042
>   8:          0         61   IO-APIC-edge      rtc
>   9:          0          1   IO-APIC-fasteoi   acpi
>  12:          0          4   IO-APIC-edge      i8042
>  14:          0          0   IO-APIC-edge      libata
>  15:          0          0   IO-APIC-edge      libata
>  18:          0         16   IO-APIC-fasteoi   aic7xxx
>  21:          0          0   IO-APIC-fasteoi   ohci_hcd:usb2
>  22:          2       8428   IO-APIC-fasteoi   ehci_hcd:usb1
> 1274:          0          0   PCI-MSI-edge      ahci
> 1275:          0        222   PCI-MSI-edge      eth0
> NMI:          0          0   Non-maskable interrupts
> LOC:      14777      16785   Local timer interrupts
> RES:       7250       6100   Rescheduling interrupts
> CAL:         41         52   function call interrupts
> TLB:       1866       1876   TLB shootdowns
> TRM:          0          0   Thermal event interrupts
> THR:          0          0   Threshold APIC interrupts
> SPU:          0          0   Spurious interrupts
> ERR:          6
> 
> With my 'own' kernel, AHCI has interrupt 315. I will try and make a more 
> monolithic kernel so I might be able to boot from a usb-flash device.
> .
> .
> .
> which didn't work. Hm, I am too stupid for that today...

Hmmm...

>>> I will reboot from systemresucecd later today and post some results with
>>> ahci-mode set, no nomsi. Just can't try patches that way.
>> Is sytemrescuecd using the same kernel?  Otherwise, it will only add
>> more to the confusion.
> 
> almost.  A heavily patched 2.6.24.2. That is why I don't sent a dmesg ... just 
> cat /proc/interrupts. I can send you lspci -vv and dmesg from systemrescuecd 
> if you want.

Aiee.... Can you please try 2.6.25-rc8 with both configurations?  And 
w/o systemrescuecd?  Just seeing whether things mount properly or not is 
good enough.  There isn't much risk of losing data.

-- 
tejun

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-03 10:44                                 ` Peer Chen
@ 2008-04-11  6:06                                   ` Tejun Heo
  2008-04-11  9:50                                     ` Peer Chen
  0 siblings, 1 reply; 52+ messages in thread
From: Tejun Heo @ 2008-04-11  6:06 UTC (permalink / raw)
  To: Peer Chen; +Cc: Volker Armin Hemmann, linux-kernel, linux-ide, Kuan Luo

Peer Chen wrote:
> I didn't find this issue on my MCP65 board but my chip revision is
> 0xa3 and yours is 0xa1, I'll try to find if there is any useful
> information between two version chip for this issue.

Any progress?

-- 
tejun

^ permalink raw reply	[flat|nested] 52+ messages in thread

* RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-11  6:06                                   ` Tejun Heo
@ 2008-04-11  9:50                                     ` Peer Chen
  2008-04-11 11:46                                       ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Peer Chen @ 2008-04-11  9:50 UTC (permalink / raw)
  To: Tejun Heo; +Cc: Volker Armin Hemmann, linux-kernel, linux-ide, Kuan Luo

I checked our chipset errata, didn't find any useful information about
SRST and MSI issue of AHCI controller.
Looks like it's related to BIOS because different mode setting in BIOS
result in different behavior, could you point out the BIOS version and
also send me the 'lspci -xxx' dump of AHCI/non-raid mode?
One question, what kind of setting option for AHCI controller in your
BIOS, there are IDE/RAID/AHCI modes for the board of mine, no 'non-raid'
mode. Non-raid mode confuse me.

BRs
Peer Chen

-----Original Message-----
From: Tejun Heo [mailto:htejun@gmail.com] 
Sent: Friday, April 11, 2008 2:06 PM
To: Peer Chen
Cc: Volker Armin Hemmann; linux-kernel@vger.kernel.org;
linux-ide@vger.kernel.org; Kuan Luo
Subject: Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3

Peer Chen wrote:
> I didn't find this issue on my MCP65 board but my chip revision is
> 0xa3 and yours is 0xa1, I'll try to find if there is any useful
> information between two version chip for this issue.

Any progress?

-- 
tejun
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-11  9:50                                     ` Peer Chen
@ 2008-04-11 11:46                                       ` Volker Armin Hemmann
  0 siblings, 0 replies; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-11 11:46 UTC (permalink / raw)
  To: Peer Chen; +Cc: Tejun Heo, linux-kernel, linux-ide, Kuan Luo

On Freitag, 11. April 2008, Peer Chen wrote:
> I checked our chipset errata, didn't find any useful information about
> SRST and MSI issue of AHCI controller.
> Looks like it's related to BIOS because different mode setting in BIOS
> result in different behavior, could you point out the BIOS version and
> also send me the 'lspci -xxx' dump of AHCI/non-raid mode?
> One question, what kind of setting option for AHCI controller in your
> BIOS, there are IDE/RAID/AHCI modes for the board of mine, no 'non-raid'
> mode. Non-raid mode confuse me.
>
in the handbook it says that non-raid is for no-hotplug, no-ncq 
configurations, ahci for hotplug and ncq configurations and raid to use the 
nvidia raid functions. So there are three settings: non-raid, ahci and raid. 

The bios version is P1.90 and the bios is definetly quirky - disabling IDE 
because I don't have any IDE devices will make the BIOS hang while 
posting ...

following three lspci -xxx. AHCI+pci=nomsi, non-raid+pci=nomsi and non-raid:

cat /lspci_ahci_2.6.25rc8_xxx
00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00: de 10 44 04 06 00 b0 00 a1 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 44 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 44 04 08 dc e0 01 22 00 11 11 d0 00 00 00
50: 23 05 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 00 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 12 88 88 00 fa 00 64 0d 03 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 80 00 0f 0f 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2)
00: de 10 41 04 0f 00 a0 20 a2 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 41 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 49 18 41 04 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 05 33 00 2c 01
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 ff ff c5 80 00 00 00 00 44 19 60 00 c0 00
80: 09 20 00 10 00 00 00 00 f0 00 00 01 ff 00 00 00
90: ff 7f 00 00 00 00 00 00 21 97 0a 68 ed bc 00 00
a0: 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 90 02 0f 03 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 04 c0 df f9 00 01 00 70
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
00: de 10 46 04 01 00 b0 00 a1 00 05 0c 00 00 80 00
10: 01 bc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 2d 00 00 01 2e 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 00 00
40: 49 18 46 04 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 20 00 00 01 24 00 00 01 28 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 01 2c 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
d0: 40 00 40 01 10 00 00 00 05 00 00 00 00 00 00 00
e0: 80 10 04 00 04 40 00 07 80 1e 02 00 41 44 44 11
f0: 02 ff 1e bf 01 00 00 80 10 00 00 00 00 00 00 00

00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00: de 10 45 04 00 04 a0 00 a1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 45 04 00 00 00 00 10 02 80 10 10 00 10 10
50: 10 10 10 10 00 00 00 00 00 00 00 00 10 42 00 00
60: 69 0c 21 06 43 98 31 0c c7 0c 63 0c 62 00 00 04
70: 20 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 01 00 00 04 42 00 01 00
90: 00 00 01 18 06 00 00 00 00 00 70 00 20 01 00 00
a0: 00 00 00 00 00 00 00 00 40 0c 50 06 40 18 20 0c
b0: 00 98 11 00 00 04 00 00 00 00 00 02 00 04 10 00
c0: 01 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1)
00: de 10 54 04 07 00 b0 00 a1 10 03 0c 00 00 80 00
10: 00 f0 df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 54 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 49 18 54 04 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1)
00: de 10 55 04 06 00 b0 00 a1 20 03 0c 00 00 80 00
10: 00 ec df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 55 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 07 02 03 01
40: 49 18 55 04 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 e4 00
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
b0: 00 11 22 33 44 00 00 00 ff 03 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1)
00: de 10 49 04 07 00 b0 00 a1 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 80 22
20: f0 f9 f0 f9 00 f0 00 f0 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 00 00 02 02
40: 00 00 73 07 01 00 02 00 07 00 00 00 00 00 48 00
50: 00 00 00 00 00 00 00 00 f7 1f ff 1f 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 0a 00 00 3c 00 00 01 00 00 00 00 08 00 01 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 49 18 49 04
c0: 49 18 49 04 07 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1)
00: de 10 48 04 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 49 18 48 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 49 18 48 04 01 00 02 00 00 00 00 00 00 00 00 00
50: 02 f0 01 00 00 00 00 00 a8 a8 a8 a8 ff 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:0a.0 SATA controller: nVidia Corporation MCP65 AHCI Controller (rev a1)
00: de 10 4d 04 07 00 b0 00 a1 01 06 01 00 00 80 00
10: 01 0e 00 00 21 0e 00 00 41 0e 00 00 61 0e 00 00
20: 01 a8 00 00 00 c0 df f9 00 00 00 00 49 18 4d 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0f 01 03 01
40: 49 18 4d 04 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 38 60 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 01 00 60 ac 00 0f 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 00 00 00 00 07 a0 18 40 20 00 20 78
80: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 4d 04 06 01
a0: 6e 5a 00 3f 00 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 86 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8
d0: 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00
e0: 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 01 1f 00 00 00 00 00

00:0b.0 PCI bridge: nVidia Corporation Unknown device 045b (rev a1)
00: de 10 5b 04 07 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 c1 c1 00 00
20: e0 f9 e0 f9 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5b 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 21 3c 11 03
90: 00 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00: de 10 5a 04 04 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5a 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 02
90: 00 00 21 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00: de 10 58 04 07 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 e1 e1 00 00
20: 00 fa b0 fe 01 d0 f1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 1a 00
40: 0d 48 00 00 49 18 58 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 01 3d 11 00
90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00: de 10 59 04 04 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 59 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 01
90: 00 00 81 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 01 00 e4 00 00 00 20 c8 2e 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 05 75 80 02 00 00 00
90: 69 01 61 01 00 00 07 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 2f 01 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 03 00 e0 00 80 ff ef 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 03 0a 00 00 00 0b 00 00 03 00 d0 00 00 0b fe 00
c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00
d0: 03 20 00 00 00 20 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00
f0: 01 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM 
Controller
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 22 00 00 00 00 00 00 00 24 f2 7d 0c 20 13 92 00
90: 30 08 01 00 6b 80 10 74 39 00 00 80 00 00 00 00
a0: eb 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00
b0: 6b ed 0d 44 32 00 00 00 08 63 80 1d 03 93 09 1d
c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 7f 1e b6 46 2c fb de bf 1a ab 3c fd 4b e5 71 a0
e0: 7e 3f d9 27 8b dc 52 89 2e 0b 5f 66 4d 87 0b b0
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 80 b1 2d b0
60: f5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 22 30 00 50 00 1b 00 08 2e 22 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 03 00 00 00 06 00 00 00 00 d3 2f 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 30 0f 0c
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 40 00 25 20 20 00
e0: 00 00 00 00 24 16 48 00 19 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 33 0f 04 00

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI 
Express Gigabit Ethernet controller (rev 01)
00: ec 10 68 81 07 01 10 40 01 00 00 02 10 00 00 00
10: 01 c8 00 00 00 00 00 00 04 f0 ef f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 68 81
30: 00 00 ec f9 40 00 00 00 00 00 00 00 0a 01 00 00
40: 01 48 c2 f7 00 00 00 00 03 50 00 00 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 84 01 00 63 7e 00 00 10 58 1a 00 11 f4 03 00
70: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11
90: 08 30 00 00 c3 21 04 00 ad b0 02 00 f1 03 00 00
a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00
b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:08.0 SCSI storage controller: Adaptec AHA-2944UW / AIC-7884U (rev 01)
00: 04 90 78 84 17 01 90 02 01 00 00 01 10 20 00 00
10: 01 d8 00 00 00 f0 ff f9 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 90 84 78
30: 00 00 fe f9 dc 00 00 00 00 00 00 00 0b 01 08 08
40: 80 15 00 00 80 15 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 21 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
00: 02 11 08 00 05 01 90 02 00 00 01 04 00 20 00 00
10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 01 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 02 14
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 82 00 00
50: 00 80 00 00 ff ff 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

04:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev 
a1)
00: de 10 02 04 07 01 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 fd 0c 00 00 d0 00 00 00 00 04 00 00 fa
20: 00 00 00 00 01 ec 00 00 00 00 00 00 de 10 39 04
30: 00 00 be fe 60 00 00 00 00 00 00 00 0a 01 00 00
40: de 10 39 04 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 e0 84 00 00
80: 10 28 00 00 01 3d 01 00 08 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

cat /lspci_non_raid_nomsi_xxx
00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00: de 10 44 04 06 00 b0 00 a1 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 44 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 44 04 08 dc e0 01 22 00 11 11 d0 00 00 00
50: 23 05 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 00 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 12 88 88 00 fa 00 64 0d 03 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 80 00 0f 0f 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2)
00: de 10 41 04 0f 00 a0 20 a2 00 01 06 00 00 80 00
10: 01 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 41 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 49 18 41 04 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 05 33 00 2c 01
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 ff ff c5 80 00 00 00 00 44 19 60 00 c0 00
80: 09 20 00 10 00 00 00 00 f0 00 00 01 ff 00 00 00
90: ff 7f 00 00 00 00 00 00 21 97 0a 68 ed bc 00 00
a0: 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 90 02 0f 03 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
00: de 10 46 04 01 00 b0 00 a1 00 05 0c 00 00 80 00
10: 01 bc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 2d 00 00 01 2e 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 00 00
40: 49 18 46 04 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 20 00 00 01 24 00 00 01 28 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 01 2c 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
d0: 40 00 40 01 10 00 00 00 05 00 00 00 00 00 00 00
e0: 80 10 04 00 04 40 00 07 80 1e 02 00 41 44 44 11
f0: 02 ff 1e bf 01 00 00 80 10 00 00 00 00 00 00 00

00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00: de 10 45 04 00 04 a0 00 a1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 45 04 00 00 00 00 10 02 80 10 10 00 10 10
50: 10 10 10 10 00 00 00 00 00 00 00 00 10 42 00 00
60: 69 0c 21 06 43 98 31 0c c7 0c 63 0c 62 00 00 04
70: 20 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 01 00 00 04 42 00 01 00
90: 00 00 01 18 06 00 00 00 00 00 70 00 20 01 00 00
a0: 00 00 00 00 00 00 00 00 40 0c 50 06 40 18 20 0c
b0: 00 98 11 00 00 04 00 00 00 00 00 02 00 04 10 00
c0: 01 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1)
00: de 10 54 04 07 00 b0 00 a1 10 03 0c 00 00 80 00
10: 00 f0 df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 54 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 49 18 54 04 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1)
00: de 10 55 04 06 00 b0 00 a1 20 03 0c 00 00 80 00
10: 00 ec df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 55 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 07 02 03 01
40: 49 18 55 04 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 84 00
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
b0: 00 11 22 33 44 00 00 00 ff 03 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1)
00: de 10 49 04 07 00 b0 00 a1 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 80 22
20: f0 f9 f0 f9 00 f0 00 f0 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 00 00 02 02
40: 00 00 73 07 01 00 02 00 07 00 00 00 00 00 48 00
50: 00 00 00 00 00 00 00 00 f7 1f ff 1f 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 0a 00 00 3c 00 00 01 00 00 00 00 08 00 01 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 49 18 49 04
c0: 49 18 49 04 07 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1)
00: de 10 48 04 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 49 18 48 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 49 18 48 04 01 00 02 00 00 00 00 00 00 00 00 00
50: 02 f0 01 00 00 00 00 00 a8 a8 a8 a8 ff 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a1)
00: de 10 5d 04 07 00 b0 00 a1 85 01 01 00 00 80 00
10: 01 0e 00 00 21 0e 00 00 41 0e 00 00 61 0e 00 00
20: 01 a8 00 00 00 c0 df f9 00 00 00 00 49 18 5d 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0f 01 03 01
40: 49 18 5d 04 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 38 60 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 60 ac 00 0f 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 00 00 00 00 07 a0 18 40 20 00 20 78
80: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 5d 04 01 01
a0: 6e 5a 00 3f 00 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 86 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 03 a8
d0: 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00
e0: 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 01 1e 00 00 00 00 00

00:0b.0 PCI bridge: nVidia Corporation Unknown device 045b (rev a1)
00: de 10 5b 04 07 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 c1 c1 00 00
20: e0 f9 e0 f9 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5b 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 21 3c 11 03
90: 00 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00: de 10 5a 04 04 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5a 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 02
90: 00 00 21 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00: de 10 58 04 07 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 e1 e1 00 00
20: 00 fa b0 fe 01 d0 f1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 1a 00
40: 0d 48 00 00 49 18 58 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 01 3d 11 00
90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00: de 10 59 04 04 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 59 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 01
90: 00 00 81 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 01 00 e4 00 00 00 20 c8 2e 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 05 75 80 02 00 00 00
90: 69 01 61 01 00 00 07 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 2f 01 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 03 00 e0 00 80 ff ef 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 03 0a 00 00 00 0b 00 00 03 00 d0 00 00 0b fe 00
c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00
d0: 03 20 00 00 00 20 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00
f0: 01 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM 
Controller
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 22 00 00 00 00 00 00 00 24 f2 7d 0c 20 13 92 00
90: 30 08 01 00 6b 80 10 74 39 00 00 80 00 00 00 00
a0: eb 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00
b0: c3 40 de 9e 38 00 00 00 08 63 80 1d 03 93 09 1d
c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 7f 1e b6 46 2c fb de bf 1a ab 3c fd 4b e5 71 a0
e0: 7e 3f d9 27 8b dc 52 89 2e 0b 5f 66 4d 87 0b b0
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 80 b1 2d b0
60: f5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 22 30 00 50 00 1b 00 08 2e 22 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 03 00 00 00 06 00 00 00 00 d3 2f 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 30 0f 0c
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 40 00 25 20 20 00
e0: 00 00 00 00 24 16 47 00 19 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 33 0f 04 00

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI 
Express Gigabit Ethernet controller (rev 01)
00: ec 10 68 81 07 01 10 40 01 00 00 02 10 00 00 00
10: 01 c8 00 00 00 00 00 00 04 f0 ef f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 68 81
30: 00 00 ec f9 40 00 00 00 00 00 00 00 0a 01 00 00
40: 01 48 c2 f7 00 00 00 00 03 50 00 00 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 84 01 00 63 7e 00 00 10 58 1a 00 11 f4 03 00
70: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11
90: 08 30 00 00 c0 f1 03 00 ad 50 02 00 d9 03 00 00
a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00
b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:08.0 SCSI storage controller: Adaptec AHA-2944UW / AIC-7884U (rev 01)
00: 04 90 78 84 17 01 90 02 01 00 00 01 10 20 00 00
10: 01 d8 00 00 00 f0 ff f9 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 90 84 78
30: 00 00 fe f9 dc 00 00 00 00 00 00 00 0b 01 08 08
40: 80 15 00 00 80 15 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 21 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
00: 02 11 08 00 05 01 90 02 00 00 01 04 00 20 00 00
10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 01 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 02 14
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 82 00 00
50: 00 80 00 00 ff ff 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

04:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev 
a1)
00: de 10 02 04 07 01 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 fd 0c 00 00 d0 00 00 00 00 04 00 00 fa
20: 00 00 00 00 01 ec 00 00 00 00 00 00 de 10 39 04
30: 00 00 be fe 60 00 00 00 00 00 00 00 0a 01 00 00
40: de 10 39 04 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 e0 84 00 00
80: 10 28 00 00 01 3d 01 00 08 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
cat /lspci_non_raid_xxx
00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00: de 10 44 04 06 00 b0 00 a1 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 44 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 44 04 08 dc e0 01 22 00 11 11 d0 00 00 00
50: 23 05 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 00 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 12 88 88 00 fa 00 64 0d 03 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 80 00 0f 0f 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2)
00: de 10 41 04 0f 00 a0 20 a2 00 01 06 00 00 80 00
10: 01 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 41 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 49 18 41 04 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 05 33 00 2c 01
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 ff ff c5 80 00 00 00 00 44 19 60 00 c0 00
80: 09 20 00 10 00 00 00 00 f0 00 00 01 ff 00 00 00
90: ff 7f 00 00 00 00 00 00 21 97 0a 68 ed bc 00 00
a0: 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 90 02 0f 03 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
00: de 10 46 04 01 00 b0 00 a1 00 05 0c 00 00 80 00
10: 01 bc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 2d 00 00 01 2e 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 00 00
40: 49 18 46 04 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 20 00 00 01 24 00 00 01 28 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 01 2c 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
d0: 40 00 40 01 10 00 00 00 05 00 00 00 00 00 00 00
e0: 80 10 04 00 04 40 00 07 80 1e 02 00 41 44 44 11
f0: 02 ff 1e bf 01 00 00 80 10 00 00 00 00 00 00 00

00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
00: de 10 45 04 00 04 a0 00 a1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 45 04 00 00 00 00 10 02 80 10 10 00 10 10
50: 10 10 10 10 00 00 00 00 00 00 00 00 10 42 00 00
60: 69 0c 21 06 43 98 31 0c c7 0c 63 0c 62 00 00 04
70: 20 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 01 00 00 04 42 00 01 00
90: 00 00 01 18 06 00 00 00 00 00 70 00 20 01 00 00
a0: 00 00 00 00 00 00 00 00 40 0c 50 06 40 18 20 0c
b0: 00 98 11 00 00 04 00 00 00 00 00 02 00 04 10 00
c0: 01 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1)
00: de 10 54 04 07 00 b0 00 a1 10 03 0c 00 00 80 00
10: 00 f0 df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 54 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 49 18 54 04 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1)
00: de 10 55 04 06 00 b0 00 a1 20 03 0c 00 00 80 00
10: 00 ec df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 55 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 07 02 03 01
40: 49 18 55 04 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 24 00
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
b0: 00 11 22 33 44 00 00 00 ff 03 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1)
00: de 10 49 04 07 00 b0 00 a1 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 80 22
20: f0 f9 f0 f9 00 f0 00 f0 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 00 00 02 02
40: 00 00 73 07 01 00 02 00 07 00 00 00 00 00 48 00
50: 00 00 00 00 00 00 00 00 f7 1f ff 1f 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 0a 00 00 3c 00 00 01 00 00 00 00 08 00 01 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 49 18 49 04
c0: 49 18 49 04 07 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1)
00: de 10 48 04 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 49 18 48 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 49 18 48 04 01 00 02 00 00 00 00 00 00 00 00 00
50: 02 f0 01 00 00 00 00 00 a8 a8 a8 a8 ff 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a1)
00: de 10 5d 04 07 04 b0 00 a1 85 01 01 00 00 80 00
10: 01 0e 00 00 21 0e 00 00 41 0e 00 00 61 0e 00 00
20: 01 a8 00 00 00 c0 df f9 00 00 00 00 49 18 5d 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0f 01 03 01
40: 49 18 5d 04 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 38 60 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 60 ac 00 0f 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 00 00 00 00 07 a0 18 40 20 00 20 78
80: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 5d 04 01 01
a0: 6e 5a 00 3f 00 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 87 00 0c 30 e0 fe 00 00 00 00 71 41 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 03 a8
d0: 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00
e0: 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 01 1e 00 00 00 00 00

00:0b.0 PCI bridge: nVidia Corporation Unknown device 045b (rev a1)
00: de 10 5b 04 07 04 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 c1 c1 00 00
20: e0 f9 e0 f9 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5b 04 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 49 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 21 3c 11 03
90: 00 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00: de 10 5a 04 04 04 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5a 04 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 51 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 02
90: 00 00 21 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00: de 10 58 04 07 04 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 e1 e1 00 00
20: 00 fa b0 fe 01 d0 f1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 1a 00
40: 0d 48 00 00 49 18 58 04 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 59 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 01 3d 11 00
90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1)
00: de 10 59 04 04 04 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 59 04 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 61 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 01
90: 00 00 81 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
HyperTransport Technology Configuration
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 01 00 e4 00 00 00 20 c8 2e 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 05 75 80 02 00 00 00
90: 69 01 61 01 00 00 07 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Address Map
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 2f 01 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 03 00 e0 00 80 ff ef 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 03 0a 00 00 00 0b 00 00 03 00 d0 00 00 0b fe 00
c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00
d0: 03 20 00 00 00 20 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00
f0: 01 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM 
Controller
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 22 00 00 00 00 00 00 00 24 f2 7d 0c 20 13 92 00
90: 30 08 01 00 6b 80 10 74 39 00 00 80 00 00 00 00
a0: eb 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00
b0: cb 9a 62 9d 2d 00 00 00 08 63 80 1d 03 93 09 1d
c0: 00 00 03 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 7f 1e b6 46 2c fb de bf 1a ab 3c fd 4b e5 71 a0
e0: 7e 3f d9 27 8b dc 52 89 2e 0b 5f 66 4d 87 0b b0
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] 
Miscellaneous Control
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 80 b1 2d b0
60: f5 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 22 30 00 50 00 1b 00 08 2e 22 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 03 00 00 00 06 00 00 00 00 d3 2f 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 30 0b 0c
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 40 00 25 20 20 00
e0: 00 00 00 00 24 16 48 00 19 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 33 0f 04 00

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI 
Express Gigabit Ethernet controller (rev 01)
00: ec 10 68 81 07 05 10 40 01 00 00 02 10 00 00 00
10: 01 c8 00 00 00 00 00 00 04 f0 ef f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 68 81
30: 00 00 ec f9 40 00 00 00 00 00 00 00 0a 01 00 00
40: 01 48 c2 f7 00 00 00 00 03 50 00 00 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 81 41 00 00
60: 10 84 01 00 63 7e 00 00 10 58 1a 00 11 f4 03 00
70: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11
90: 08 30 00 00 8a 91 00 00 b4 70 0e 00 1d 03 00 00
a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00
b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:08.0 SCSI storage controller: Adaptec AHA-2944UW / AIC-7884U (rev 01)
00: 04 90 78 84 17 01 90 02 01 00 00 01 10 20 00 00
10: 01 d8 00 00 00 f0 ff f9 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 90 84 78
30: 00 00 fe f9 dc 00 00 00 00 00 00 00 0b 01 08 08
40: 80 15 00 00 80 15 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 21 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
00: 02 11 08 00 05 01 90 02 00 00 01 04 00 20 00 00
10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 01 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 02 14
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 82 00 00
50: 00 80 00 00 ff ff 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

04:00.0 VGA compatible controller: nVidia Corporation Unknown device 0402 (rev 
a1)
00: de 10 02 04 07 01 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 fd 0c 00 00 d0 00 00 00 00 04 00 00 fa
20: 00 00 00 00 01 ec 00 00 00 00 00 00 de 10 39 04
30: 00 00 be fe 60 00 00 00 00 00 00 00 0a 01 00 00
40: de 10 39 04 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 e0 84 00 00
80: 10 28 00 00 01 3d 01 00 08 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Glück Auf,
Volker


^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-11  6:05                                       ` Tejun Heo
@ 2008-04-11 11:55                                         ` Volker Armin Hemmann
  2008-04-12  1:27                                           ` Tejun Heo
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-11 11:55 UTC (permalink / raw)
  To: Tejun Heo; +Cc: linux-kernel, linux-ide, Peer Chen, Kuan Luo

[-- Attachment #1: Type: text/plain, Size: 2748 bytes --]

Hi,

> Aiee.... Can you please try 2.6.25-rc8 with both configurations?  And
> w/o systemrescuecd?  Just seeing whether things mount properly or not is
> good enough.  There isn't much risk of losing data.

2.6.25-rc8 is a 'no change'. AHCI+pci=nomsi boots, AHCI without hangs.
with AHCI I also get this:

[    0.363828] ------------[ cut here ]------------
[    0.363828] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a()
[    0.363828] Modules linked in:
[    0.363828] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2
[    0.363828]
[    0.363828] Call Trace:
[    0.363828]  [<ffffffff8022c5a5>] warn_on_slowpath+0x51/0x63
[    0.363832]  [<ffffffff80220061>] __ioremap+0x8/0x197
[    0.363872]  [<ffffffff803921f4>] pci_conf1_read+0xb2/0xbd
[    0.363911]  [<ffffffff802f3316>] pcim_iomap_release+0x0/0x2c
[    0.363950]  [<ffffffff802f3316>] pcim_iomap_release+0x0/0x2c
[    0.363989]  [<ffffffff803471a9>] devres_find+0x4b/0x65
[    0.364028]  [<ffffffff8036e4cd>] ahci_init_one+0x190/0xa3a
[    0.364067]  [<ffffffff802af837>] sysfs_addrm_finish+0x1d/0x209
[    0.364107]  [<ffffffff80284014>] ifind+0x34/0x8d
[    0.364145]  [<ffffffff802af54e>] sysfs_find_dirent+0x1b/0x2f
[    0.364184]  [<ffffffff802eb75d>] ida_get_new_above+0xf0/0x180
[    0.364223]  [<ffffffff802af837>] sysfs_addrm_finish+0x1d/0x209
[    0.364263]  [<ffffffff802b0378>] sysfs_create_link+0xb6/0x102
[    0.364303]  [<ffffffff802f8664>] pci_device_probe+0x4c/0x72
[    0.364342]  [<ffffffff80344c48>] driver_probe_device+0xb5/0x132
[    0.364381]  [<ffffffff80344ddb>] __driver_attach+0x6f/0xaf
[    0.364419]  [<ffffffff80344d6c>] __driver_attach+0x0/0xaf
[    0.364458]  [<ffffffff80344d6c>] __driver_attach+0x0/0xaf
[    0.364498]  [<ffffffff8034400a>] bus_for_each_dev+0x44/0x6f
[    0.364538]  [<ffffffff802a9b57>] proc_match+0x23/0x2d
[    0.364576]  [<ffffffff80344876>] bus_add_driver+0xae/0x1f4
[    0.364614]  [<ffffffff8034500a>] driver_register+0x59/0xce
[    0.364654]  [<ffffffff802f88a5>] __pci_register_driver+0x4a/0x7d
[    0.364701]  [<ffffffff804e56b8>] kernel_init+0x14f/0x2b9
[    0.364740]  [<ffffffff8020be98>] child_rip+0xa/0x12
[    0.364779]  [<ffffffff804e5569>] kernel_init+0x0/0x2b9
[    0.364817]  [<ffffffff8020be8e>] child_rip+0x0/0x12
[    0.364854]
[    0.364891] ---[ end trace ea9d541113ecaf1e ]---
[    1.370495] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl SATA mode
[    1.370495] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[    1.370495] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.370495] scsi0 : ahci
[    1.370506] scsi1 : ahci
[    1.370515] scsi2 : ahci
[    1.370524] scsi3 : ahci

Glück Auf,
Volker

[-- Attachment #2: dmesg_2.6.25-rc8_ahci_nomsi --]
[-- Type: application/octet-stream, Size: 30930 bytes --]

[-- Attachment #3: dmesg_2.6.25-rc8_nonraid --]
[-- Type: application/octet-stream, Size: 28639 bytes --]

[-- Attachment #4: dmesg_2.6.25-rc8_nonraid_nomsi --]
[-- Type: application/octet-stream, Size: 28752 bytes --]

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-11 11:55                                         ` Volker Armin Hemmann
@ 2008-04-12  1:27                                           ` Tejun Heo
  2008-04-12  1:42                                             ` Jeff Garzik
  0 siblings, 1 reply; 52+ messages in thread
From: Tejun Heo @ 2008-04-12  1:27 UTC (permalink / raw)
  To: Volker Armin Hemmann; +Cc: linux-kernel, linux-ide, Peer Chen, Kuan Luo

Volker Armin Hemmann wrote:
> Hi,
> 
>> Aiee.... Can you please try 2.6.25-rc8 with both configurations?  And
>> w/o systemrescuecd?  Just seeing whether things mount properly or not is
>> good enough.  There isn't much risk of losing data.
> 
> 2.6.25-rc8 is a 'no change'. AHCI+pci=nomsi boots, AHCI without hangs.
> with AHCI I also get this:
> 
> [    0.363828] ------------[ cut here ]------------
> [    0.363828] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a()
> [    0.363828] Modules linked in:
> [    0.363828] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2

Heh.. that's AHCI_EN not getting set.  Peer, any ideas?  The driver set 
AHCI_EN in the HOST_CTL register but on reading back it's still clear.

Thanks.

-- 
tejun

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-12  1:27                                           ` Tejun Heo
@ 2008-04-12  1:42                                             ` Jeff Garzik
  2008-04-14  4:02                                               ` Peer Chen
  0 siblings, 1 reply; 52+ messages in thread
From: Jeff Garzik @ 2008-04-12  1:42 UTC (permalink / raw)
  To: Tejun Heo
  Cc: Volker Armin Hemmann, linux-kernel, linux-ide, Peer Chen, Kuan Luo

Tejun Heo wrote:
> Volker Armin Hemmann wrote:
>> Hi,
>>
>>> Aiee.... Can you please try 2.6.25-rc8 with both configurations?  And
>>> w/o systemrescuecd?  Just seeing whether things mount properly or not is
>>> good enough.  There isn't much risk of losing data.
>>
>> 2.6.25-rc8 is a 'no change'. AHCI+pci=nomsi boots, AHCI without hangs.
>> with AHCI I also get this:
>>
>> [    0.363828] ------------[ cut here ]------------
>> [    0.363828] WARNING: at drivers/ata/ahci.c:645 
>> ahci_init_one+0x190/0xa3a()
>> [    0.363828] Modules linked in:
>> [    0.363828] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2
> 
> Heh.. that's AHCI_EN not getting set.  Peer, any ideas?  The driver set 
> AHCI_EN in the HOST_CTL register but on reading back it's still clear.

Possibly the hardware is not idle?  I wonder if the BIOS is doing 
anything with the IDE interface.  _Probably_ not, but that is certainly 
a situation where switching to AHCI can be a problem for certain AHCI chips.

	Jeff




^ permalink raw reply	[flat|nested] 52+ messages in thread

* RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-12  1:42                                             ` Jeff Garzik
@ 2008-04-14  4:02                                               ` Peer Chen
  2008-04-14  6:41                                                 ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Peer Chen @ 2008-04-14  4:02 UTC (permalink / raw)
  To: Jeff Garzik, Tejun Heo
  Cc: Volker Armin Hemmann, linux-kernel, linux-ide, Kuan Luo

Volker,
Could you add a delay between setting AHCI_EN and reading back function?

BRs
Peer Chen

-----Original Message-----
From: Jeff Garzik [mailto:jeff@garzik.org] 
Sent: Saturday, April 12, 2008 9:43 AM
To: Tejun Heo
Cc: Volker Armin Hemmann; linux-kernel@vger.kernel.org;
linux-ide@vger.kernel.org; Peer Chen; Kuan Luo
Subject: Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3

Tejun Heo wrote:
> Volker Armin Hemmann wrote:
>> Hi,
>>
>>> Aiee.... Can you please try 2.6.25-rc8 with both configurations?
And
>>> w/o systemrescuecd?  Just seeing whether things mount properly or
not is
>>> good enough.  There isn't much risk of losing data.
>>
>> 2.6.25-rc8 is a 'no change'. AHCI+pci=nomsi boots, AHCI without
hangs.
>> with AHCI I also get this:
>>
>> [    0.363828] ------------[ cut here ]------------
>> [    0.363828] WARNING: at drivers/ata/ahci.c:645 
>> ahci_init_one+0x190/0xa3a()
>> [    0.363828] Modules linked in:
>> [    0.363828] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2
> 
> Heh.. that's AHCI_EN not getting set.  Peer, any ideas?  The driver
set 
> AHCI_EN in the HOST_CTL register but on reading back it's still clear.

Possibly the hardware is not idle?  I wonder if the BIOS is doing 
anything with the IDE interface.  _Probably_ not, but that is certainly 
a situation where switching to AHCI can be a problem for certain AHCI
chips.

	Jeff



-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-14  4:02                                               ` Peer Chen
@ 2008-04-14  6:41                                                 ` Volker Armin Hemmann
  2008-04-14  8:11                                                   ` Peer Chen
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-14  6:41 UTC (permalink / raw)
  To: Peer Chen; +Cc: Jeff Garzik, Tejun Heo, linux-kernel, linux-ide, Kuan Luo

On Montag, 14. April 2008, Peer Chen wrote:
> Volker,
> Could you add a delay between setting AHCI_EN and reading back function?
>

if you tell me how to?

Glück Auf
Volker


^ permalink raw reply	[flat|nested] 52+ messages in thread

* RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-14  6:41                                                 ` Volker Armin Hemmann
@ 2008-04-14  8:11                                                   ` Peer Chen
  2008-04-14 21:12                                                     ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Peer Chen @ 2008-04-14  8:11 UTC (permalink / raw)
  To: Volker Armin Hemmann
  Cc: Jeff Garzik, Tejun Heo, linux-kernel, linux-ide, Kuan Luo

Volker,
I mean add msleep(x) function between writel(HOST_AHCI_EN, mmio + HOST_CTL) and readl(mmio + HOST_CTL) cause we ever met a bug that writing data to the AHCI BAR5 but need a delay to get correct read back value. But forget it, looks like it's not the same case here.
Which mode do you set(ahci or non-raid) when you encountered the issue that the AHCI_EN bit failed to set? I found we have workaround for AHCI_EN bit setting in our Bios programming guide for AHCI mode.

BRs
Peer Chen

-----Original Message-----
From: Volker Armin Hemmann [mailto:volker.armin.hemmann@tu-clausthal.de] 
Sent: Monday, April 14, 2008 2:42 PM
To: Peer Chen
Cc: Jeff Garzik; Tejun Heo; linux-kernel@vger.kernel.org; linux-ide@vger.kernel.org; Kuan Luo
Subject: Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3

On Montag, 14. April 2008, Peer Chen wrote:
> Volker,
> Could you add a delay between setting AHCI_EN and reading back function?
>

if you tell me how to?

Glück Auf
Volker

-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-14  8:11                                                   ` Peer Chen
@ 2008-04-14 21:12                                                     ` Volker Armin Hemmann
  2008-04-15 12:57                                                       ` Peer Chen
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-14 21:12 UTC (permalink / raw)
  To: Peer Chen; +Cc: Jeff Garzik, Tejun Heo, linux-kernel, linux-ide, Kuan Luo

Hi,

On Montag, 14. April 2008, Peer Chen wrote:
> Volker,
> I mean add msleep(x) function between writel(HOST_AHCI_EN, mmio + HOST_CTL)
> and readl(mmio + HOST_CTL) cause we ever met a bug that writing data to the
> AHCI BAR5 but need a delay to get correct read back value. But forget it,
> looks like it's not the same case here. Which mode do you set(ahci or
> non-raid) when you encountered the issue that the AHCI_EN bit failed to
> set? I found we have workaround for AHCI_EN bit setting in our Bios
> programming guide for AHCI mode.

you mean this?

[    0.363828] ------------[ cut here ]------------
[    0.363828] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a()
[    0.363828] Modules linked in:
[    0.363828] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2
[    0.363828]
[    0.363828] Call Trace:
[    0.363828]  [<ffffffff8022c5a5>] warn_on_slowpath+0x51/0x63
[    0.363832]  [<ffffffff80220061>] __ioremap+0x8/0x197
[    0.363872]  [<ffffffff803921f4>] pci_conf1_read+0xb2/0xbd
[    0.363911]  [<ffffffff802f3316>] pcim_iomap_release+0x0/0x2c
[    0.363950]  [<ffffffff802f3316>] pcim_iomap_release+0x0/0x2c
[    0.363989]  [<ffffffff803471a9>] devres_find+0x4b/0x65
[    0.364028]  [<ffffffff8036e4cd>] ahci_init_one+0x190/0xa3a
[    0.364067]  [<ffffffff802af837>] sysfs_addrm_finish+0x1d/0x209
[    0.364107]  [<ffffffff80284014>] ifind+0x34/0x8d
[    0.364145]  [<ffffffff802af54e>] sysfs_find_dirent+0x1b/0x2f
[    0.364184]  [<ffffffff802eb75d>] ida_get_new_above+0xf0/0x180
[    0.364223]  [<ffffffff802af837>] sysfs_addrm_finish+0x1d/0x209
[    0.364263]  [<ffffffff802b0378>] sysfs_create_link+0xb6/0x102
[    0.364303]  [<ffffffff802f8664>] pci_device_probe+0x4c/0x72
[    0.364342]  [<ffffffff80344c48>] driver_probe_device+0xb5/0x132
[    0.364381]  [<ffffffff80344ddb>] __driver_attach+0x6f/0xaf
[    0.364419]  [<ffffffff80344d6c>] __driver_attach+0x0/0xaf
[    0.364458]  [<ffffffff80344d6c>] __driver_attach+0x0/0xaf
[    0.364498]  [<ffffffff8034400a>] bus_for_each_dev+0x44/0x6f
[    0.364538]  [<ffffffff802a9b57>] proc_match+0x23/0x2d
[    0.364576]  [<ffffffff80344876>] bus_add_driver+0xae/0x1f4
[    0.364614]  [<ffffffff8034500a>] driver_register+0x59/0xce
[    0.364654]  [<ffffffff802f88a5>] __pci_register_driver+0x4a/0x7d
[    0.364701]  [<ffffffff804e56b8>] kernel_init+0x14f/0x2b9
[    0.364740]  [<ffffffff8020be98>] child_rip+0xa/0x12
[    0.364779]  [<ffffffff804e5569>] kernel_init+0x0/0x2b9
[    0.364817]  [<ffffffff8020be8e>] child_rip+0x0/0x12
[    0.364854]
[    0.364891] ---[ end trace ea9d541113ecaf1e ]---

this happened with AHCI mode set in bios, pci=nomsi as kernel boot parameter 
and kernel 2.6.25-rc8.

Something similar looking happened without pci=nomsi, but in that case I could 
not scroll back to even make a picture because of the kernel panic (rootfs 
not found).

Glück Auf
Volker

^ permalink raw reply	[flat|nested] 52+ messages in thread

* RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-14 21:12                                                     ` Volker Armin Hemmann
@ 2008-04-15 12:57                                                       ` Peer Chen
  2008-04-15 16:20                                                         ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Peer Chen @ 2008-04-15 12:57 UTC (permalink / raw)
  To: Volker Armin Hemmann
  Cc: Jeff Garzik, Tejun Heo, linux-kernel, linux-ide, Kuan Luo


Yes, could you dump the IO port data from 0x2f00 to 0x2fff and send it to me, it record the base address BIOS trap?
Also, could you update the latest BIOS to try this issue again?

BRs
Peer Chen

-----Original Message-----
From: Volker Armin Hemmann [mailto:volker.armin.hemmann@tu-clausthal.de] 
Sent: Tuesday, April 15, 2008 5:13 AM
To: Peer Chen
Cc: Jeff Garzik; Tejun Heo; linux-kernel@vger.kernel.org; linux-ide@vger.kernel.org; Kuan Luo
Subject: Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3

Hi,

On Montag, 14. April 2008, Peer Chen wrote:
> Volker,
> I mean add msleep(x) function between writel(HOST_AHCI_EN, mmio + HOST_CTL)
> and readl(mmio + HOST_CTL) cause we ever met a bug that writing data to the
> AHCI BAR5 but need a delay to get correct read back value. But forget it,
> looks like it's not the same case here. Which mode do you set(ahci or
> non-raid) when you encountered the issue that the AHCI_EN bit failed to
> set? I found we have workaround for AHCI_EN bit setting in our Bios
> programming guide for AHCI mode.

you mean this?

[    0.363828] ------------[ cut here ]------------
[    0.363828] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a()
[    0.363828] Modules linked in:
[    0.363828] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2
[    0.363828]
[    0.363828] Call Trace:
[    0.363828]  [<ffffffff8022c5a5>] warn_on_slowpath+0x51/0x63
[    0.363832]  [<ffffffff80220061>] __ioremap+0x8/0x197
[    0.363872]  [<ffffffff803921f4>] pci_conf1_read+0xb2/0xbd
[    0.363911]  [<ffffffff802f3316>] pcim_iomap_release+0x0/0x2c
[    0.363950]  [<ffffffff802f3316>] pcim_iomap_release+0x0/0x2c
[    0.363989]  [<ffffffff803471a9>] devres_find+0x4b/0x65
[    0.364028]  [<ffffffff8036e4cd>] ahci_init_one+0x190/0xa3a
[    0.364067]  [<ffffffff802af837>] sysfs_addrm_finish+0x1d/0x209
[    0.364107]  [<ffffffff80284014>] ifind+0x34/0x8d
[    0.364145]  [<ffffffff802af54e>] sysfs_find_dirent+0x1b/0x2f
[    0.364184]  [<ffffffff802eb75d>] ida_get_new_above+0xf0/0x180
[    0.364223]  [<ffffffff802af837>] sysfs_addrm_finish+0x1d/0x209
[    0.364263]  [<ffffffff802b0378>] sysfs_create_link+0xb6/0x102
[    0.364303]  [<ffffffff802f8664>] pci_device_probe+0x4c/0x72
[    0.364342]  [<ffffffff80344c48>] driver_probe_device+0xb5/0x132
[    0.364381]  [<ffffffff80344ddb>] __driver_attach+0x6f/0xaf
[    0.364419]  [<ffffffff80344d6c>] __driver_attach+0x0/0xaf
[    0.364458]  [<ffffffff80344d6c>] __driver_attach+0x0/0xaf
[    0.364498]  [<ffffffff8034400a>] bus_for_each_dev+0x44/0x6f
[    0.364538]  [<ffffffff802a9b57>] proc_match+0x23/0x2d
[    0.364576]  [<ffffffff80344876>] bus_add_driver+0xae/0x1f4
[    0.364614]  [<ffffffff8034500a>] driver_register+0x59/0xce
[    0.364654]  [<ffffffff802f88a5>] __pci_register_driver+0x4a/0x7d
[    0.364701]  [<ffffffff804e56b8>] kernel_init+0x14f/0x2b9
[    0.364740]  [<ffffffff8020be98>] child_rip+0xa/0x12
[    0.364779]  [<ffffffff804e5569>] kernel_init+0x0/0x2b9
[    0.364817]  [<ffffffff8020be8e>] child_rip+0x0/0x12
[    0.364854]
[    0.364891] ---[ end trace ea9d541113ecaf1e ]---

this happened with AHCI mode set in bios, pci=nomsi as kernel boot parameter 
and kernel 2.6.25-rc8.

Something similar looking happened without pci=nomsi, but in that case I could 
not scroll back to even make a picture because of the kernel panic (rootfs 
not found).

Glück Auf
Volker
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-15 12:57                                                       ` Peer Chen
@ 2008-04-15 16:20                                                         ` Volker Armin Hemmann
  2008-04-18  5:51                                                           ` Peer Chen
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-15 16:20 UTC (permalink / raw)
  To: Peer Chen; +Cc: Jeff Garzik, Tejun Heo, linux-kernel, linux-ide, Kuan Luo

Hi,

On Dienstag, 15. April 2008, Peer Chen wrote:
> Yes, could you dump the IO port data from 0x2f00 to 0x2fff and send it to
> me, it record the base address BIOS trap? 

how do I do that?
Also, I can't see anything resembling this two adresses(?) in /proc/ioports:
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:09.0
01f0-01f7 : 0000:00:09.0
0290-029f : pnp 00:0a
  0295-0296 : w83627ehf
    0295-0296 : w83627ehf
0376-0376 : 0000:00:09.0
03c0-03df : vga+
03f6-03f6 : 0000:00:09.0
04d0-04d1 : pnp 00:05
0800-080f : pnp 00:05
0cf8-0cff : PCI conf1
0e00-0e07 : 0000:00:0a.0
  0e00-0e07 : ahci
0e20-0e23 : 0000:00:0a.0
  0e20-0e23 : ahci
0e40-0e47 : 0000:00:0a.0
  0e40-0e47 : ahci
0e60-0e63 : 0000:00:0a.0
  0e60-0e63 : ahci
2000-207f : pnp 00:05
  2000-2003 : ACPI PM1a_EVT_BLK
  2004-2005 : ACPI PM1a_CNT_BLK
  2008-200b : ACPI PM_TMR
  2010-2015 : ACPI CPU throttle
  2020-2027 : ACPI GPE0_BLK
2080-20ff : pnp 00:05
2400-247f : pnp 00:05
2480-24ff : pnp 00:05
  24a0-24af : ACPI GPE1_BLK
2800-287f : pnp 00:05
2880-28ff : pnp 00:05
2c00-2c7f : pnp 00:05
2c80-2cff : pnp 00:05
2d00-2d3f : 0000:00:01.1
  2d00-2d3f : nForce2_smbus
2e00-2e3f : 0000:00:01.1
  2e00-2e3f : nForce2_smbus
a800-a80f : 0000:00:0a.0
  a800-a80f : ahci
bc00-bc3f : 0000:00:01.1
c000-cfff : PCI Bus #01
  c800-c8ff : 0000:01:00.0
    c800-c8ff : r8169
d000-dfff : PCI Bus #02
  d800-d8ff : 0000:02:08.0
  dc00-dc3f : 0000:02:09.0
    dc00-dc3f : EMU10K1
e000-efff : PCI Bus #04
  ec00-ec7f : 0000:04:00.0
ffa0-ffaf : 0000:00:09.0


> Also, could you update the latest BIOS to try this issue again?

there was a new bios from today - and nothing changed:
with 2.6.25-rc8:

[    0.360518] ------------[ cut here ]------------
[    0.360518] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a()
[    0.360518] Modules linked in:
[    0.360518] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2
[    0.360518]
[    0.360518] Call Trace:
[    0.360518]  [<ffffffff8022c5a5>] warn_on_slowpath+0x51/0x63
[    0.360522]  [<ffffffff80220061>] __ioremap+0x8/0x197
[    0.360561]  [<ffffffff803921f4>] pci_conf1_read+0xb2/0xbd
[    0.360600]  [<ffffffff802f3316>] pcim_iomap_release+0x0/0x2c
[    0.360639]  [<ffffffff802f3316>] pcim_iomap_release+0x0/0x2c
[    0.360679]  [<ffffffff803471a9>] devres_find+0x4b/0x65
[    0.360718]  [<ffffffff8036e4cd>] ahci_init_one+0x190/0xa3a
[    0.360757]  [<ffffffff802af837>] sysfs_addrm_finish+0x1d/0x209
[    0.360796]  [<ffffffff80284014>] ifind+0x34/0x8d
[    0.360834]  [<ffffffff802af54e>] sysfs_find_dirent+0x1b/0x2f
[    0.360873]  [<ffffffff802eb75d>] ida_get_new_above+0xf0/0x180
[    0.360912]  [<ffffffff802af837>] sysfs_addrm_finish+0x1d/0x209
[    0.360951]  [<ffffffff802b0378>] sysfs_create_link+0xb6/0x102
[    0.360992]  [<ffffffff802f8664>] pci_device_probe+0x4c/0x72
[    0.361030]  [<ffffffff80344c48>] driver_probe_device+0xb5/0x132
[    0.361069]  [<ffffffff80344ddb>] __driver_attach+0x6f/0xaf
[    0.361108]  [<ffffffff80344d6c>] __driver_attach+0x0/0xaf
[    0.361146]  [<ffffffff80344d6c>] __driver_attach+0x0/0xaf
[    0.361185]  [<ffffffff8034400a>] bus_for_each_dev+0x44/0x6f
[    0.361225]  [<ffffffff802a9b57>] proc_match+0x23/0x2d
[    0.361263]  [<ffffffff80344876>] bus_add_driver+0xae/0x1f4
[    0.361302]  [<ffffffff8034500a>] driver_register+0x59/0xce
[    0.361341]  [<ffffffff802f88a5>] __pci_register_driver+0x4a/0x7d
[    0.361388]  [<ffffffff804e56b8>] kernel_init+0x14f/0x2b9
[    0.361427]  [<ffffffff8020be98>] child_rip+0xa/0x12
[    0.361465]  [<ffffffff804e5569>] kernel_init+0x0/0x2b9
[    0.361503]  [<ffffffff8020be8e>] child_rip+0x0/0x12
[    0.361540]
[    0.361577] ---[ end trace 78236403fd67c90f ]-

Glück Auf,
Volker

^ permalink raw reply	[flat|nested] 52+ messages in thread

* RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-15 16:20                                                         ` Volker Armin Hemmann
@ 2008-04-18  5:51                                                           ` Peer Chen
  2008-04-19 13:48                                                             ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Peer Chen @ 2008-04-18  5:51 UTC (permalink / raw)
  To: Volker Armin Hemmann
  Cc: Jeff Garzik, Tejun Heo, linux-kernel, linux-ide, Kuan Luo

Try to use this: http://sourceforge.net/project/showfiles.php?group_id=220929

BRs
Peer Chen
-----Original Message-----
From: Volker Armin Hemmann [mailto:volker.armin.hemmann@tu-clausthal.de] 
Sent: Wednesday, April 16, 2008 12:20 AM
To: Peer Chen
Cc: Jeff Garzik; Tejun Heo; linux-kernel@vger.kernel.org; linux-ide@vger.kernel.org; Kuan Luo
Subject: Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3

Hi,

On Dienstag, 15. April 2008, Peer Chen wrote:
> Yes, could you dump the IO port data from 0x2f00 to 0x2fff and send it to
> me, it record the base address BIOS trap? 

how do I do that?
Also, I can't see anything resembling this two adresses(?) in /proc/ioports:
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:09.0
01f0-01f7 : 0000:00:09.0
0290-029f : pnp 00:0a
  0295-0296 : w83627ehf
    0295-0296 : w83627ehf
0376-0376 : 0000:00:09.0
03c0-03df : vga+
03f6-03f6 : 0000:00:09.0
04d0-04d1 : pnp 00:05
0800-080f : pnp 00:05
0cf8-0cff : PCI conf1
0e00-0e07 : 0000:00:0a.0
  0e00-0e07 : ahci
0e20-0e23 : 0000:00:0a.0
  0e20-0e23 : ahci
0e40-0e47 : 0000:00:0a.0
  0e40-0e47 : ahci
0e60-0e63 : 0000:00:0a.0
  0e60-0e63 : ahci
2000-207f : pnp 00:05
  2000-2003 : ACPI PM1a_EVT_BLK
  2004-2005 : ACPI PM1a_CNT_BLK
  2008-200b : ACPI PM_TMR
  2010-2015 : ACPI CPU throttle
  2020-2027 : ACPI GPE0_BLK
2080-20ff : pnp 00:05
2400-247f : pnp 00:05
2480-24ff : pnp 00:05
  24a0-24af : ACPI GPE1_BLK
2800-287f : pnp 00:05
2880-28ff : pnp 00:05
2c00-2c7f : pnp 00:05
2c80-2cff : pnp 00:05
2d00-2d3f : 0000:00:01.1
  2d00-2d3f : nForce2_smbus
2e00-2e3f : 0000:00:01.1
  2e00-2e3f : nForce2_smbus
a800-a80f : 0000:00:0a.0
  a800-a80f : ahci
bc00-bc3f : 0000:00:01.1
c000-cfff : PCI Bus #01
  c800-c8ff : 0000:01:00.0
    c800-c8ff : r8169
d000-dfff : PCI Bus #02
  d800-d8ff : 0000:02:08.0
  dc00-dc3f : 0000:02:09.0
    dc00-dc3f : EMU10K1
e000-efff : PCI Bus #04
  ec00-ec7f : 0000:04:00.0
ffa0-ffaf : 0000:00:09.0


> Also, could you update the latest BIOS to try this issue again?

there was a new bios from today - and nothing changed:
with 2.6.25-rc8:

[    0.360518] ------------[ cut here ]------------
[    0.360518] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a()
[    0.360518] Modules linked in:
[    0.360518] Pid: 1, comm: swapper Not tainted 2.6.25-rc8 #2
[    0.360518]
[    0.360518] Call Trace:
[    0.360518]  [<ffffffff8022c5a5>] warn_on_slowpath+0x51/0x63
[    0.360522]  [<ffffffff80220061>] __ioremap+0x8/0x197
[    0.360561]  [<ffffffff803921f4>] pci_conf1_read+0xb2/0xbd
[    0.360600]  [<ffffffff802f3316>] pcim_iomap_release+0x0/0x2c
[    0.360639]  [<ffffffff802f3316>] pcim_iomap_release+0x0/0x2c
[    0.360679]  [<ffffffff803471a9>] devres_find+0x4b/0x65
[    0.360718]  [<ffffffff8036e4cd>] ahci_init_one+0x190/0xa3a
[    0.360757]  [<ffffffff802af837>] sysfs_addrm_finish+0x1d/0x209
[    0.360796]  [<ffffffff80284014>] ifind+0x34/0x8d
[    0.360834]  [<ffffffff802af54e>] sysfs_find_dirent+0x1b/0x2f
[    0.360873]  [<ffffffff802eb75d>] ida_get_new_above+0xf0/0x180
[    0.360912]  [<ffffffff802af837>] sysfs_addrm_finish+0x1d/0x209
[    0.360951]  [<ffffffff802b0378>] sysfs_create_link+0xb6/0x102
[    0.360992]  [<ffffffff802f8664>] pci_device_probe+0x4c/0x72
[    0.361030]  [<ffffffff80344c48>] driver_probe_device+0xb5/0x132
[    0.361069]  [<ffffffff80344ddb>] __driver_attach+0x6f/0xaf
[    0.361108]  [<ffffffff80344d6c>] __driver_attach+0x0/0xaf
[    0.361146]  [<ffffffff80344d6c>] __driver_attach+0x0/0xaf
[    0.361185]  [<ffffffff8034400a>] bus_for_each_dev+0x44/0x6f
[    0.361225]  [<ffffffff802a9b57>] proc_match+0x23/0x2d
[    0.361263]  [<ffffffff80344876>] bus_add_driver+0xae/0x1f4
[    0.361302]  [<ffffffff8034500a>] driver_register+0x59/0xce
[    0.361341]  [<ffffffff802f88a5>] __pci_register_driver+0x4a/0x7d
[    0.361388]  [<ffffffff804e56b8>] kernel_init+0x14f/0x2b9
[    0.361427]  [<ffffffff8020be98>] child_rip+0xa/0x12
[    0.361465]  [<ffffffff804e5569>] kernel_init+0x0/0x2b9
[    0.361503]  [<ffffffff8020be8e>] child_rip+0x0/0x12
[    0.361540]
[    0.361577] ---[ end trace 78236403fd67c90f ]-

Glück Auf,
Volker
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-18  5:51                                                           ` Peer Chen
@ 2008-04-19 13:48                                                             ` Volker Armin Hemmann
  2008-04-22 10:10                                                               ` Peer Chen
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-19 13:48 UTC (permalink / raw)
  To: Peer Chen; +Cc: Jeff Garzik, Tejun Heo, linux-kernel, linux-ide, Kuan Luo

H,

with 2.6.25+reiser4:

[    0.367181] ------------[ cut here ]------------
[    0.367181] WARNING: at drivers/ata/ahci.c:645 ahci_init_one+0x190/0xa3a()
[    0.367181] Modules linked in:
[    0.367181] Pid: 1, comm: swapper Not tainted 2.6.25 #1
[    0.367181]
[    0.367181] Call Trace:
[    0.367181]  [<ffffffff8022c451>] warn_on_slowpath+0x51/0x63
[    0.367181]  [<ffffffff80220061>] __ioremap+0x148/0x197
[    0.367185]  [<ffffffff803cf680>] pci_conf1_read+0xb2/0xbd
[    0.367225]  [<ffffffff8032aa0e>] pcim_iomap_release+0x0/0x2c
[    0.367264]  [<ffffffff8032aa0e>] pcim_iomap_release+0x0/0x2c
[    0.367304]  [<ffffffff803845e9>] devres_find+0x4b/0x65
[    0.367343]  [<ffffffff803ab959>] ahci_init_one+0x190/0xa3a
[    0.367382]  [<ffffffff802af71f>] sysfs_addrm_finish+0x1d/0x209
[    0.367422]  [<ffffffff80283f34>] ifind+0x34/0x8d
[    0.367461]  [<ffffffff802af436>] sysfs_find_dirent+0x1b/0x2f
[    0.367501]  [<ffffffff80322e1d>] ida_get_new_above+0xf0/0x180
[    0.367540]  [<ffffffff802af71f>] sysfs_addrm_finish+0x1d/0x209
[    0.367580]  [<ffffffff802b0260>] sysfs_create_link+0xb6/0x102
[    0.367620]  [<ffffffff80335b44>] pci_device_probe+0x4c/0x72
[    0.367659]  [<ffffffff80382088>] driver_probe_device+0xb5/0x132
[    0.367698]  [<ffffffff8038221b>] __driver_attach+0x6f/0xaf
[    0.367737]  [<ffffffff803821ac>] __driver_attach+0x0/0xaf
[    0.367776]  [<ffffffff803821ac>] __driver_attach+0x0/0xaf
[    0.367816]  [<ffffffff8038144a>] bus_for_each_dev+0x44/0x6f
[    0.367856]  [<ffffffff802a9a3b>] proc_match+0x23/0x2d
[    0.367895]  [<ffffffff80381cb6>] bus_add_driver+0xae/0x1f4
[    0.367933]  [<ffffffff8038244a>] driver_register+0x59/0xce
[    0.367973]  [<ffffffff80335d85>] __pci_register_driver+0x4a/0x7d
[    0.368019]  [<ffffffff805346b8>] kernel_init+0x14f/0x2b9
[    0.368059]  [<ffffffff8020bd58>] child_rip+0xa/0x12
[    0.368097]  [<ffffffff80534569>] kernel_init+0x0/0x2b9
[    0.368136]  [<ffffffff8020bd4e>] child_rip+0x0/0x12
[    0.368173]
[    0.368210] ---[ end trace 9a12831ed6194f10 ]---
[    1.373847] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
imp
l SATA mode
[    1.373847] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[    1.373847] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.373849] scsi0 : ahci
[    1.373859] scsi1 : ahci
[    1.373868] scsi2 : ahci
[    1.373877] scsi3 : ahci
[    1.373884] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq
 23
[    1.373884] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq
 23
[    1.373884] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq
 23
[    1.373884] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq
 23
[    1.806725] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.807223] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[    1.807223] ata1.00: 312581808 sectors, multi 16: LBA48
[    1.807780] ata1.00: configured for UDMA/133
[    2.439665] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.460164] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[    2.460164] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.462073] ata2.00: configured for UDMA/133
[    2.779316] ata3: SATA link down (SStatus 0 SControl 300)
[    3.099182] ata4: SATA link down (SStatus 0 SControl 300)
[    3.300538] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ
: 0 ANSI: 5
[    3.300551] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[    3.300551] sd 0:0:0:0: [sda] Write Protect is off
[    3.300551] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.300551] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.300551] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[    3.300551] sd 0:0:0:0: [sda] Write Protect is off
[    3.300551] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.300551] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.300551]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.142035] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.142045] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.142050] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ
: 0 ANSI: 5
[    3.142057] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[    3.142057] sd 1:0:0:0: [sdb] Write Protect is off
[    3.142057] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.142057] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.142057] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[    3.142057] sd 1:0:0:0: [sdb] Write Protect is off
[    3.142057] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.142057] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.142057]  sdb: sdb1 sdb2
[    3.153169] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.153179] sd 1:0:0:0: Attached scsi generic sg1 type 0

and from mmapper:
0x2f00: 0xf9dfc004
0x2f01: 0x00f9dfc0
0x2f02: 0x0000f9df
0x2f03: 0x000000f9
0x2f04: 0x00000000
0x2f05: 0xfc000000
0x2f06: 0xfffc0000
0x2f07: 0xfffffc00
0x2f08: 0xfffffffc
0x2f09: 0xffffffff
0x2f0a: 0x00ffffff
0x2f0b: 0x0900ffff
0x2f0c: 0x000900ff
0x2f0d: 0x24000900
0x2f0e: 0x50240009
0x2f0f: 0x00502400
0x2f10: 0xfe005024
0x2f11: 0xfdfe0050
0x2f12: 0x00fdfe00
0x2f13: 0x0000fdfe
0x2f14: 0x000000fd
0x2f15: 0xfc000000
0x2f16: 0xfffc0000
0x2f17: 0xfffffc00
0x2f18: 0xfffffffc
0x2f19: 0xffffffff
0x2f1a: 0x00ffffff
0x2f1b: 0x0c00ffff
0x2f1c: 0x000c00ff
0x2f1d: 0x00000c00
0x2f1e: 0x0000000c
0x2f1f: 0x00000000
0x2f20: 0x00000000
0x2f21: 0x00000000
0x2f22: 0x00000000
0x2f23: 0x00000000
0x2f24: 0x00000000
0x2f25: 0x00000000
0x2f26: 0x00000000
0x2f27: 0x00000000
0x2f28: 0x00000000
0x2f29: 0x00000000
0x2f2a: 0x00000000
0x2f2b: 0x00000000
0x2f2c: 0x00000000
0x2f2d: 0x00000000
0x2f2e: 0x00000000
0x2f2f: 0x00000000
0x2f30: 0x00000000
0x2f31: 0x00000000
0x2f32: 0x00000000
0x2f33: 0x00000000
0x2f34: 0x00000000
0x2f35: 0x00000000
0x2f36: 0x00000000
0x2f37: 0x00000000
0x2f38: 0x00000000
0x2f39: 0x00000000
0x2f3a: 0x00000000
0x2f3b: 0x00000000
0x2f3c: 0x00000000
0x2f3d: 0x00000000
0x2f3e: 0x00000000
0x2f3f: 0x00000000
0x2f40: 0x00000000
0x2f41: 0x00000000
0x2f42: 0x00000000
0x2f43: 0x00000000
0x2f44: 0x00000000
0x2f45: 0x00000000
0x2f46: 0x00000000
0x2f47: 0x00000000
0x2f48: 0x00000000
0x2f49: 0x00000000
0x2f4a: 0x00000000
0x2f4b: 0x00000000
0x2f4c: 0x00000000
0x2f4d: 0x00000000
0x2f4e: 0x00000000
0x2f4f: 0x00000000
0x2f50: 0x00000000
0x2f51: 0x00000000
0x2f52: 0x00000000
0x2f53: 0x00000000
0x2f54: 0x00000000
0x2f55: 0x00000000
0x2f56: 0x00000000
0x2f57: 0x00000000
0x2f58: 0x00000000
0x2f59: 0x00000000
0x2f5a: 0x00000000
0x2f5b: 0x00000000
0x2f5c: 0x00000000
0x2f5d: 0x00000000
0x2f5e: 0x00000000
0x2f5f: 0x00000000
0x2f60: 0x00000000
0x2f61: 0x00000000
0x2f62: 0x00000000
0x2f63: 0x00000000
0x2f64: 0x00000000
0x2f65: 0x00000000
0x2f66: 0x00000000
0x2f67: 0x00000000
0x2f68: 0x00000000
0x2f69: 0x00000000
0x2f6a: 0x00000000
0x2f6b: 0x00000000
0x2f6c: 0x00000000
0x2f6d: 0x00000000
0x2f6e: 0x00000000
0x2f6f: 0x00000000
0x2f70: 0x00000000
0x2f71: 0x00000000
0x2f72: 0x00000000
0x2f73: 0x00000000
0x2f74: 0x00000000
0x2f75: 0x00000000
0x2f76: 0x00000000
0x2f77: 0x00000000
0x2f78: 0x00000000
0x2f79: 0x00000000
0x2f7a: 0x00000000
0x2f7b: 0x00000000
0x2f7c: 0x00000000
0x2f7d: 0x41000000
0x2f7e: 0x40410000
0x2f7f: 0x10404100
0x2f80: 0xc6104041
0x2f81: 0x02c61040
0x2f82: 0x0002c610
0x2f83: 0x000002c6
0x2f84: 0x80000002
0x2f85: 0x35800000
0x2f86: 0x48358000
0x2f87: 0xf6483580
0x2f88: 0x38f64835
0x2f89: 0x3138f648
0x2f8a: 0xd03138f6
0x2f8b: 0xf6d03138
0x2f8c: 0x88f6d031
0x2f8d: 0x0488f6d0
0x2f8e: 0xec0488f6
0x2f8f: 0xb6ec0488
0x2f90: 0x56b6ec04
0x2f91: 0x6b56b6ec
0x2f92: 0x736b56b6
0x2f93: 0xd6736b56
0x2f94: 0xc1d6736b
0x2f95: 0x87c1d673
0x2f96: 0xf187c1d6
0x2f97: 0x2bf187c1
0x2f98: 0xfc2bf187
0x2f99: 0xa7fc2bf1
0x2f9a: 0x67a7fc2b
0x2f9b: 0x6f67a7fc
0x2f9c: 0x5f6f67a7
0x2f9d: 0xd25f6f67
0x2f9e: 0xa8d25f6f
0x2f9f: 0x07a8d25f
0x2fa0: 0x8007a8d2
0x2fa1: 0xfc8007a8
0x2fa2: 0xf2fc8007
0x2fa3: 0x62f2fc80
0x2fa4: 0x1062f2fc
0x2fa5: 0xfe1062f2
0x2fa6: 0x7bfe1062
0x2fa7: 0x807bfe10
0x2fa8: 0xed807bfe
0x2fa9: 0xfded807b
0x2faa: 0x97fded80
0x2fab: 0x9697fded
0x2fac: 0x9e9697fd
0x2fad: 0x499e9697
0x2fae: 0xbd499e96
0x2faf: 0xa2bd499e
0x2fb0: 0x9aa2bd49
0x2fb1: 0x589aa2bd
0x2fb2: 0x20589aa2
0x2fb3: 0x3720589a
0x2fb4: 0x1b372058
0x2fb5: 0xa41b3720
0x2fb6: 0x08a41b37
0x2fb7: 0x7e08a41b
0x2fb8: 0x457e08a4
0x2fb9: 0x7e457e08
0x2fba: 0x2e7e457e
0x2fbb: 0x502e7e45
0x2fbc: 0x5e502e7e
0x2fbd: 0x855e502e
0x2fbe: 0x99855e50
0x2fbf: 0x1b99855e
0x2fc0: 0x921b9985
0x2fc1: 0x22921b99
0x2fc2: 0x5a22921b
0x2fc3: 0x005a2292
0x2fc4: 0x3e005a22
0x2fc5: 0x5b3e005a
0x2fc6: 0x045b3e00
0x2fc7: 0xe4045b3e
0x2fc8: 0xf2e4045b
0x2fc9: 0xe4f2e404
0x2fca: 0x3be4f2e4
0x2fcb: 0xb33be4f2
0x2fcc: 0xbbb33be4
0x2fcd: 0x97bbb33b
0x2fce: 0x4997bbb3
0x2fcf: 0x714997bb
0x2fd0: 0x8e714997
0x2fd1: 0x0e8e7149
0x2fd2: 0x3a0e8e71
0x2fd3: 0xcf3a0e8e
0x2fd4: 0x5fcf3a0e
0x2fd5: 0xb75fcf3a
0x2fd6: 0xdbb75fcf
0x2fd7: 0x5ddbb75f
0x2fd8: 0x205ddbb7
0x2fd9: 0x19205ddb
0x2fda: 0x0219205d
0x2fdb: 0x10021920
0x2fdc: 0x79100219
0x2fdd: 0x26791002
0x2fde: 0x00267910
0x2fdf: 0xfb002679
0x2fe0: 0x00fb0026
0x2fe1: 0xbb00fb00
0x2fe2: 0xf8bb00fb
0x2fe3: 0x7bf8bb00
0x2fe4: 0xb47bf8bb
0x2fe5: 0x0ab47bf8
0x2fe6: 0x7e0ab47b
0x2fe7: 0xff7e0ab4
0x2fe8: 0xf7ff7e0a
0x2fe9: 0x51f7ff7e
0x2fea: 0x4f51f7ff
0x2feb: 0x104f51f7
0x2fec: 0xe7104f51
0x2fed: 0xdae7104f
0x2fee: 0x3adae710
0x2fef: 0xbb3adae7
0x2ff0: 0xc7bb3ada
0x2ff1: 0xfdc7bb3a
0x2ff2: 0xfffdc7bb
0x2ff3: 0xd8fffdc7
0x2ff4: 0xc3d8fffd
0x2ff5: 0x90c3d8ff
0x2ff6: 0x0890c3d8
0x2ff7: 0x9f0890c3
0x2ff8: 0x7a9f0890
0x2ff9: 0x007a9f08
0x2ffa: 0xfd007a9f
0x2ffb: 0xaffd007a
0x2ffc: 0xb0affd00
0x2ffd: 0xffb0affd
0x2ffe: 0xffffb0af
0x2fff: 0xffffffb0

Glück Auf
Volker

^ permalink raw reply	[flat|nested] 52+ messages in thread

* RE: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-19 13:48                                                             ` Volker Armin Hemmann
@ 2008-04-22 10:10                                                               ` Peer Chen
  2008-04-22 12:44                                                                 ` Volker Armin Hemmann
  0 siblings, 1 reply; 52+ messages in thread
From: Peer Chen @ 2008-04-22 10:10 UTC (permalink / raw)
  To: Volker Armin Hemmann
  Cc: Jeff Garzik, Tejun Heo, linux-kernel, linux-ide, Kuan Luo

Looks like the BIOS trap had been applied, GHC.AE suppose should be set correctly.
Volker, could you try to set the AE twice in the driver or using mmapper to set the AE manually to check if AE will be set correctly or not?

BRs
Peer Chen
 

> -----Original Message-----
> From: Volker Armin Hemmann 
> [mailto:volker.armin.hemmann@tu-clausthal.de] 
> Sent: Saturday, April 19, 2008 9:48 PM
> To: Peer Chen
> Cc: Jeff Garzik; Tejun Heo; linux-kernel@vger.kernel.org; 
> linux-ide@vger.kernel.org; Kuan Luo
> Subject: Re: 2.6.24.X: SATA/AHCI related boot delay. - not 
> with 2.6.24.3
> 
> H,
> 
> with 2.6.25+reiser4:
> 
> [    0.367181] ------------[ cut here ]------------
> [    0.367181] WARNING: at drivers/ata/ahci.c:645 
> ahci_init_one+0x190/0xa3a()
> [    0.367181] Modules linked in:
> [    0.367181] Pid: 1, comm: swapper Not tainted 2.6.25 #1
> [    0.367181]
> [    0.367181] Call Trace:
> [    0.367181]  [<ffffffff8022c451>] warn_on_slowpath+0x51/0x63
> [    0.367181]  [<ffffffff80220061>] __ioremap+0x148/0x197
> [    0.367185]  [<ffffffff803cf680>] pci_conf1_read+0xb2/0xbd
> [    0.367225]  [<ffffffff8032aa0e>] pcim_iomap_release+0x0/0x2c
> [    0.367264]  [<ffffffff8032aa0e>] pcim_iomap_release+0x0/0x2c
> [    0.367304]  [<ffffffff803845e9>] devres_find+0x4b/0x65
> [    0.367343]  [<ffffffff803ab959>] ahci_init_one+0x190/0xa3a
> [    0.367382]  [<ffffffff802af71f>] sysfs_addrm_finish+0x1d/0x209
> [    0.367422]  [<ffffffff80283f34>] ifind+0x34/0x8d
> [    0.367461]  [<ffffffff802af436>] sysfs_find_dirent+0x1b/0x2f
> [    0.367501]  [<ffffffff80322e1d>] ida_get_new_above+0xf0/0x180
> [    0.367540]  [<ffffffff802af71f>] sysfs_addrm_finish+0x1d/0x209
> [    0.367580]  [<ffffffff802b0260>] sysfs_create_link+0xb6/0x102
> [    0.367620]  [<ffffffff80335b44>] pci_device_probe+0x4c/0x72
> [    0.367659]  [<ffffffff80382088>] driver_probe_device+0xb5/0x132
> [    0.367698]  [<ffffffff8038221b>] __driver_attach+0x6f/0xaf
> [    0.367737]  [<ffffffff803821ac>] __driver_attach+0x0/0xaf
> [    0.367776]  [<ffffffff803821ac>] __driver_attach+0x0/0xaf
> [    0.367816]  [<ffffffff8038144a>] bus_for_each_dev+0x44/0x6f
> [    0.367856]  [<ffffffff802a9a3b>] proc_match+0x23/0x2d
> [    0.367895]  [<ffffffff80381cb6>] bus_add_driver+0xae/0x1f4
> [    0.367933]  [<ffffffff8038244a>] driver_register+0x59/0xce
> [    0.367973]  [<ffffffff80335d85>] __pci_register_driver+0x4a/0x7d
> [    0.368019]  [<ffffffff805346b8>] kernel_init+0x14f/0x2b9
> [    0.368059]  [<ffffffff8020bd58>] child_rip+0xa/0x12
> [    0.368097]  [<ffffffff80534569>] kernel_init+0x0/0x2b9
> [    0.368136]  [<ffffffff8020bd4e>] child_rip+0x0/0x12
> [    0.368173]
> [    0.368210] ---[ end trace 9a12831ed6194f10 ]---
> [    1.373847] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 
> ports 3 Gbps 0xf 
> imp
> l SATA mode
> [    1.373847] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
> [    1.373847] PCI: Setting latency timer of device 0000:00:0a.0 to 64
> [    1.373849] scsi0 : ahci
> [    1.373859] scsi1 : ahci
> [    1.373868] scsi2 : ahci
> [    1.373877] scsi3 : ahci
> [    1.373884] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 
> port 0xf9dfc100 
> irq
>  23
> [    1.373884] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 
> port 0xf9dfc180 
> irq
>  23
> [    1.373884] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 
> port 0xf9dfc200 
> irq
>  23
> [    1.373884] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 
> port 0xf9dfc280 
> irq
>  23
> [    1.806725] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    1.807223] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, 
> max UDMA/133
> [    1.807223] ata1.00: 312581808 sectors, multi 16: LBA48
> [    1.807780] ata1.00: configured for UDMA/133
> [    2.439665] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [    2.460164] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
> [    2.460164] ata2.00: 976773168 sectors, multi 16: LBA48 
> NCQ (depth 0/32)
> [    2.462073] ata2.00: configured for UDMA/133
> [    2.779316] ata3: SATA link down (SStatus 0 SControl 300)
> [    3.099182] ata4: SATA link down (SStatus 0 SControl 300)
> [    3.300538] scsi 0:0:0:0: Direct-Access     ATA      WDC 
> WD1600JS-00M 10.0 
> PQ
> : 0 ANSI: 5
> [    3.300551] sd 0:0:0:0: [sda] 312581808 512-byte hardware 
> sectors (160042 
> MB)
> [    3.300551] sd 0:0:0:0: [sda] Write Protect is off
> [    3.300551] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    3.300551] sd 0:0:0:0: [sda] Write cache: enabled, read 
> cache: enabled, 
> does
> n't support DPO or FUA
> [    3.300551] sd 0:0:0:0: [sda] 312581808 512-byte hardware 
> sectors (160042 
> MB)
> [    3.300551] sd 0:0:0:0: [sda] Write Protect is off
> [    3.300551] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    3.300551] sd 0:0:0:0: [sda] Write cache: enabled, read 
> cache: enabled, 
> does
> n't support DPO or FUA
> [    3.300551]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> [    3.142035] sd 0:0:0:0: [sda] Attached SCSI disk
> [    3.142045] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [    3.142050] scsi 1:0:0:0: Direct-Access     ATA      
> SAMSUNG HD501LJ  CR10 
> PQ
> : 0 ANSI: 5
> [    3.142057] sd 1:0:0:0: [sdb] 976773168 512-byte hardware 
> sectors (500108 
> MB)
> [    3.142057] sd 1:0:0:0: [sdb] Write Protect is off
> [    3.142057] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [    3.142057] sd 1:0:0:0: [sdb] Write cache: enabled, read 
> cache: enabled, 
> does
> n't support DPO or FUA
> [    3.142057] sd 1:0:0:0: [sdb] 976773168 512-byte hardware 
> sectors (500108 
> MB)
> [    3.142057] sd 1:0:0:0: [sdb] Write Protect is off
> [    3.142057] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [    3.142057] sd 1:0:0:0: [sdb] Write cache: enabled, read 
> cache: enabled, 
> does
> n't support DPO or FUA
> [    3.142057]  sdb: sdb1 sdb2
> [    3.153169] sd 1:0:0:0: [sdb] Attached SCSI disk
> [    3.153179] sd 1:0:0:0: Attached scsi generic sg1 type 0
> 
> and from mmapper:
> 0x2f00: 0xf9dfc004
> 0x2f01: 0x00f9dfc0
> 0x2f02: 0x0000f9df
> 0x2f03: 0x000000f9
> 0x2f04: 0x00000000
> 0x2f05: 0xfc000000
> 0x2f06: 0xfffc0000
> 0x2f07: 0xfffffc00
> 0x2f08: 0xfffffffc
> 0x2f09: 0xffffffff
> 0x2f0a: 0x00ffffff
> 0x2f0b: 0x0900ffff
> 0x2f0c: 0x000900ff
> 0x2f0d: 0x24000900
> 0x2f0e: 0x50240009
> 0x2f0f: 0x00502400
> 0x2f10: 0xfe005024
> 0x2f11: 0xfdfe0050
> 0x2f12: 0x00fdfe00
> 0x2f13: 0x0000fdfe
> 0x2f14: 0x000000fd
> 0x2f15: 0xfc000000
> 0x2f16: 0xfffc0000
> 0x2f17: 0xfffffc00
> 0x2f18: 0xfffffffc
> 0x2f19: 0xffffffff
> 0x2f1a: 0x00ffffff
> 0x2f1b: 0x0c00ffff
> 0x2f1c: 0x000c00ff
> 0x2f1d: 0x00000c00
> 0x2f1e: 0x0000000c
> 0x2f1f: 0x00000000
> 0x2f20: 0x00000000
> 0x2f21: 0x00000000
> 0x2f22: 0x00000000
> 0x2f23: 0x00000000
> 0x2f24: 0x00000000
> 0x2f25: 0x00000000
> 0x2f26: 0x00000000
> 0x2f27: 0x00000000
> 0x2f28: 0x00000000
> 0x2f29: 0x00000000
> 0x2f2a: 0x00000000
> 0x2f2b: 0x00000000
> 0x2f2c: 0x00000000
> 0x2f2d: 0x00000000
> 0x2f2e: 0x00000000
> 0x2f2f: 0x00000000
> 0x2f30: 0x00000000
> 0x2f31: 0x00000000
> 0x2f32: 0x00000000
> 0x2f33: 0x00000000
> 0x2f34: 0x00000000
> 0x2f35: 0x00000000
> 0x2f36: 0x00000000
> 0x2f37: 0x00000000
> 0x2f38: 0x00000000
> 0x2f39: 0x00000000
> 0x2f3a: 0x00000000
> 0x2f3b: 0x00000000
> 0x2f3c: 0x00000000
> 0x2f3d: 0x00000000
> 0x2f3e: 0x00000000
> 0x2f3f: 0x00000000
> 0x2f40: 0x00000000
> 0x2f41: 0x00000000
> 0x2f42: 0x00000000
> 0x2f43: 0x00000000
> 0x2f44: 0x00000000
> 0x2f45: 0x00000000
> 0x2f46: 0x00000000
> 0x2f47: 0x00000000
> 0x2f48: 0x00000000
> 0x2f49: 0x00000000
> 0x2f4a: 0x00000000
> 0x2f4b: 0x00000000
> 0x2f4c: 0x00000000
> 0x2f4d: 0x00000000
> 0x2f4e: 0x00000000
> 0x2f4f: 0x00000000
> 0x2f50: 0x00000000
> 0x2f51: 0x00000000
> 0x2f52: 0x00000000
> 0x2f53: 0x00000000
> 0x2f54: 0x00000000
> 0x2f55: 0x00000000
> 0x2f56: 0x00000000
> 0x2f57: 0x00000000
> 0x2f58: 0x00000000
> 0x2f59: 0x00000000
> 0x2f5a: 0x00000000
> 0x2f5b: 0x00000000
> 0x2f5c: 0x00000000
> 0x2f5d: 0x00000000
> 0x2f5e: 0x00000000
> 0x2f5f: 0x00000000
> 0x2f60: 0x00000000
> 0x2f61: 0x00000000
> 0x2f62: 0x00000000
> 0x2f63: 0x00000000
> 0x2f64: 0x00000000
> 0x2f65: 0x00000000
> 0x2f66: 0x00000000
> 0x2f67: 0x00000000
> 0x2f68: 0x00000000
> 0x2f69: 0x00000000
> 0x2f6a: 0x00000000
> 0x2f6b: 0x00000000
> 0x2f6c: 0x00000000
> 0x2f6d: 0x00000000
> 0x2f6e: 0x00000000
> 0x2f6f: 0x00000000
> 0x2f70: 0x00000000
> 0x2f71: 0x00000000
> 0x2f72: 0x00000000
> 0x2f73: 0x00000000
> 0x2f74: 0x00000000
> 0x2f75: 0x00000000
> 0x2f76: 0x00000000
> 0x2f77: 0x00000000
> 0x2f78: 0x00000000
> 0x2f79: 0x00000000
> 0x2f7a: 0x00000000
> 0x2f7b: 0x00000000
> 0x2f7c: 0x00000000
> 0x2f7d: 0x41000000
> 0x2f7e: 0x40410000
> 0x2f7f: 0x10404100
> 0x2f80: 0xc6104041
> 0x2f81: 0x02c61040
> 0x2f82: 0x0002c610
> 0x2f83: 0x000002c6
> 0x2f84: 0x80000002
> 0x2f85: 0x35800000
> 0x2f86: 0x48358000
> 0x2f87: 0xf6483580
> 0x2f88: 0x38f64835
> 0x2f89: 0x3138f648
> 0x2f8a: 0xd03138f6
> 0x2f8b: 0xf6d03138
> 0x2f8c: 0x88f6d031
> 0x2f8d: 0x0488f6d0
> 0x2f8e: 0xec0488f6
> 0x2f8f: 0xb6ec0488
> 0x2f90: 0x56b6ec04
> 0x2f91: 0x6b56b6ec
> 0x2f92: 0x736b56b6
> 0x2f93: 0xd6736b56
> 0x2f94: 0xc1d6736b
> 0x2f95: 0x87c1d673
> 0x2f96: 0xf187c1d6
> 0x2f97: 0x2bf187c1
> 0x2f98: 0xfc2bf187
> 0x2f99: 0xa7fc2bf1
> 0x2f9a: 0x67a7fc2b
> 0x2f9b: 0x6f67a7fc
> 0x2f9c: 0x5f6f67a7
> 0x2f9d: 0xd25f6f67
> 0x2f9e: 0xa8d25f6f
> 0x2f9f: 0x07a8d25f
> 0x2fa0: 0x8007a8d2
> 0x2fa1: 0xfc8007a8
> 0x2fa2: 0xf2fc8007
> 0x2fa3: 0x62f2fc80
> 0x2fa4: 0x1062f2fc
> 0x2fa5: 0xfe1062f2
> 0x2fa6: 0x7bfe1062
> 0x2fa7: 0x807bfe10
> 0x2fa8: 0xed807bfe
> 0x2fa9: 0xfded807b
> 0x2faa: 0x97fded80
> 0x2fab: 0x9697fded
> 0x2fac: 0x9e9697fd
> 0x2fad: 0x499e9697
> 0x2fae: 0xbd499e96
> 0x2faf: 0xa2bd499e
> 0x2fb0: 0x9aa2bd49
> 0x2fb1: 0x589aa2bd
> 0x2fb2: 0x20589aa2
> 0x2fb3: 0x3720589a
> 0x2fb4: 0x1b372058
> 0x2fb5: 0xa41b3720
> 0x2fb6: 0x08a41b37
> 0x2fb7: 0x7e08a41b
> 0x2fb8: 0x457e08a4
> 0x2fb9: 0x7e457e08
> 0x2fba: 0x2e7e457e
> 0x2fbb: 0x502e7e45
> 0x2fbc: 0x5e502e7e
> 0x2fbd: 0x855e502e
> 0x2fbe: 0x99855e50
> 0x2fbf: 0x1b99855e
> 0x2fc0: 0x921b9985
> 0x2fc1: 0x22921b99
> 0x2fc2: 0x5a22921b
> 0x2fc3: 0x005a2292
> 0x2fc4: 0x3e005a22
> 0x2fc5: 0x5b3e005a
> 0x2fc6: 0x045b3e00
> 0x2fc7: 0xe4045b3e
> 0x2fc8: 0xf2e4045b
> 0x2fc9: 0xe4f2e404
> 0x2fca: 0x3be4f2e4
> 0x2fcb: 0xb33be4f2
> 0x2fcc: 0xbbb33be4
> 0x2fcd: 0x97bbb33b
> 0x2fce: 0x4997bbb3
> 0x2fcf: 0x714997bb
> 0x2fd0: 0x8e714997
> 0x2fd1: 0x0e8e7149
> 0x2fd2: 0x3a0e8e71
> 0x2fd3: 0xcf3a0e8e
> 0x2fd4: 0x5fcf3a0e
> 0x2fd5: 0xb75fcf3a
> 0x2fd6: 0xdbb75fcf
> 0x2fd7: 0x5ddbb75f
> 0x2fd8: 0x205ddbb7
> 0x2fd9: 0x19205ddb
> 0x2fda: 0x0219205d
> 0x2fdb: 0x10021920
> 0x2fdc: 0x79100219
> 0x2fdd: 0x26791002
> 0x2fde: 0x00267910
> 0x2fdf: 0xfb002679
> 0x2fe0: 0x00fb0026
> 0x2fe1: 0xbb00fb00
> 0x2fe2: 0xf8bb00fb
> 0x2fe3: 0x7bf8bb00
> 0x2fe4: 0xb47bf8bb
> 0x2fe5: 0x0ab47bf8
> 0x2fe6: 0x7e0ab47b
> 0x2fe7: 0xff7e0ab4
> 0x2fe8: 0xf7ff7e0a
> 0x2fe9: 0x51f7ff7e
> 0x2fea: 0x4f51f7ff
> 0x2feb: 0x104f51f7
> 0x2fec: 0xe7104f51
> 0x2fed: 0xdae7104f
> 0x2fee: 0x3adae710
> 0x2fef: 0xbb3adae7
> 0x2ff0: 0xc7bb3ada
> 0x2ff1: 0xfdc7bb3a
> 0x2ff2: 0xfffdc7bb
> 0x2ff3: 0xd8fffdc7
> 0x2ff4: 0xc3d8fffd
> 0x2ff5: 0x90c3d8ff
> 0x2ff6: 0x0890c3d8
> 0x2ff7: 0x9f0890c3
> 0x2ff8: 0x7a9f0890
> 0x2ff9: 0x007a9f08
> 0x2ffa: 0xfd007a9f
> 0x2ffb: 0xaffd007a
> 0x2ffc: 0xb0affd00
> 0x2ffd: 0xffb0affd
> 0x2ffe: 0xffffb0af
> 0x2fff: 0xffffffb0
> 
> Glück Auf
> Volker
> 
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain
confidential information.  Any unauthorized review, use, disclosure or distribution
is prohibited.  If you are not the intended recipient, please contact the sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-22 10:10                                                               ` Peer Chen
@ 2008-04-22 12:44                                                                 ` Volker Armin Hemmann
  2008-04-22 14:11                                                                   ` Tejun Heo
  0 siblings, 1 reply; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-22 12:44 UTC (permalink / raw)
  To: Peer Chen; +Cc: Jeff Garzik, Tejun Heo, linux-kernel, linux-ide, Kuan Luo

On Dienstag, 22. April 2008, Peer Chen wrote:
> Looks like the BIOS trap had been applied, GHC.AE suppose should be set
> correctly. Volker, could you try to set the AE twice in the driver or using
> mmapper to set the AE manually to check if AE will be set correctly or not?

emm, I am totally out of my depth here. I don't even know what you are talking 
about. If you explain me in nice, little word or even better, with examples, 
what I shall try, I will happily do so.

Glück Auf,
Volker

^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-22 12:44                                                                 ` Volker Armin Hemmann
@ 2008-04-22 14:11                                                                   ` Tejun Heo
  2008-04-22 15:12                                                                     ` Volker Armin Hemmann
  2008-05-29 14:54                                                                     ` Hemmann, Volker Armin
  0 siblings, 2 replies; 52+ messages in thread
From: Tejun Heo @ 2008-04-22 14:11 UTC (permalink / raw)
  To: Volker Armin Hemmann
  Cc: Peer Chen, Jeff Garzik, linux-kernel, linux-ide, Kuan Luo

[-- Attachment #1: Type: text/plain, Size: 560 bytes --]

Volker Armin Hemmann wrote:
> On Dienstag, 22. April 2008, Peer Chen wrote:
>> Looks like the BIOS trap had been applied, GHC.AE suppose should be set
>> correctly. Volker, could you try to set the AE twice in the driver or using
>> mmapper to set the AE manually to check if AE will be set correctly or not?
> 
> emm, I am totally out of my depth here. I don't even know what you are talking 
> about. If you explain me in nice, little word or even better, with examples, 
> what I shall try, I will happily do so.

This patch should do the trick.

-- 
tejun

[-- Attachment #2: patch --]
[-- Type: text/plain, Size: 733 bytes --]

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 3efa990..dbbf6cf 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -562,15 +562,23 @@ static inline void __iomem *ahci_port_base(struct ata_port *ap)
 
 static void ahci_enable_ahci(void __iomem *mmio)
 {
+	int i;
 	u32 tmp;
 
-	/* turn on AHCI_EN */
 	tmp = readl(mmio + HOST_CTL);
-	if (!(tmp & HOST_AHCI_EN)) {
+	if (tmp & HOST_AHCI_EN)
+		return;
+
+	for (i = 0; i < 10; i++) {
+		msleep(100);
 		tmp |= HOST_AHCI_EN;
 		writel(tmp, mmio + HOST_CTL);
 		tmp = readl(mmio + HOST_CTL);	/* flush && sanity check */
-		WARN_ON(!(tmp & HOST_AHCI_EN));
+
+		/* turn on AHCI_EN */
+		if (tmp & HOST_AHCI_EN)
+			break;
+		printk("AHCI_EN failed i=%d\n", i);
 	}
 }
 

^ permalink raw reply related	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-22 14:11                                                                   ` Tejun Heo
@ 2008-04-22 15:12                                                                     ` Volker Armin Hemmann
  2008-05-29 14:54                                                                     ` Hemmann, Volker Armin
  1 sibling, 0 replies; 52+ messages in thread
From: Volker Armin Hemmann @ 2008-04-22 15:12 UTC (permalink / raw)
  To: Tejun Heo; +Cc: Peer Chen, Jeff Garzik, linux-kernel, linux-ide, Kuan Luo

On Dienstag, 22. April 2008, Tejun Heo wrote:
> Volker Armin Hemmann wrote:
> > On Dienstag, 22. April 2008, Peer Chen wrote:
> >> Looks like the BIOS trap had been applied, GHC.AE suppose should be set
> >> correctly. Volker, could you try to set the AE twice in the driver or
> >> using mmapper to set the AE manually to check if AE will be set
> >> correctly or not?
> >
> > emm, I am totally out of my depth here. I don't even know what you are
> > talking about. If you explain me in nice, little word or even better,
> > with examples, what I shall try, I will happily do so.
>
> This patch should do the trick.

ok, with the patch the call trace is gone.

Looks like this now (2.6.25+reiser4+your patch)

[    0.367177] Driver 'sd' needs updating - please use bus_type methods
[    0.367189] ahci 0000:00:0a.0: version 3.0
[    0.367189] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.367189] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(lev
el, low) -> IRQ 23
[    0.470521] AHCI_EN failed i=0
[    1.572680] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
imp
l SATA mode
[    1.572680] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[    1.572680] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.572682] scsi0 : ahci
[    1.572692] scsi1 : ahci
[    1.572701] scsi2 : ahci
[    1.572711] scsi3 : ahci
[    1.572717] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq
 23
[    1.572717] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq
 23
[    1.572717] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq
 23
[    1.572717] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq
 23
[    2.010056] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.010552] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[    2.010552] ata1.00: 312581808 sectors, multi 16: LBA48
[    2.011132] ata1.00: configured for UDMA/133
[    2.643013] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.663511] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[    2.663511] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.665420] ata2.00: configured for UDMA/133
[    2.982665] ata3: SATA link down (SStatus 0 SControl 300)
[    3.302534] ata4: SATA link down (SStatus 0 SControl 300)
[    3.499383] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ
: 0 ANSI: 5
[    3.499400] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[    3.499400] sd 0:0:0:0: [sda] Write Protect is off
[    3.499400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.499400] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.499400] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[    3.499400] sd 0:0:0:0: [sda] Write Protect is off
[    3.499400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.499400] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.499400]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.336734] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.336745] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.336750] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ
: 0 ANSI: 5
[    3.336757] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[    3.336757] sd 1:0:0:0: [sdb] Write Protect is off
[    3.336757] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.336757] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.336757] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[    3.336757] sd 1:0:0:0: [sdb] Write Protect is off
[    3.336757] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.336757] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
does
n't support DPO or FUA
[    3.336757]  sdb: sdb1 sdb2
[    3.383500] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.383510] sd 1:0:0:0: Attached scsi generic sg1 type 0

complete dmesg:
[    0.000000] Linux version 2.6.25 (root@energy) (gcc version 4.2.3 (Gentoo 
4.2.3 p1.0)) #3 SMP Tue Apr 22 16:57:50 CEST 2008
[    0.000000] Command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 
console=tty6ÿ      ëMítHt$01Ò¿
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] end_pfn_map = 1245184
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98F0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT   1000822 MSFT       
97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A_M_I  OEMFACP  12000601 MSFT       
97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19192      192 INTL 
20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC   1000822 MSFT       
97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG   1000822 MSFT       
97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM   1000822 MSFT       
97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0  1000822 MSFT       
97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         
1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 
used
[    0.000000] early res: 0 [0-fff] BIOS data page
[    0.000000] early res: 1 [6000-7fff] SMP_TRAMPOLINE
[    0.000000] early res: 2 [200000-59e313] TEXT DATA BSS
[    0.000000] early res: 3 [9fc00-a0bff] EBDA
[    0.000000] early res: 4 [8000-dfff] PGTABLE
[    0.000000] No mptable found.
[    0.000000]  [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on 
node 0
[    0.000000]  [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on 
node 0
[    0.000000]  [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on 
node 0
[    0.000000]  [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on 
node 0
[    0.000000]  [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on 
node 0
[    0.000000]  [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on 
node 0
[    0.000000]  [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on 
node 0
[    0.000000]  [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on 
node 0
[    0.000000]  [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on 
node 0
[    0.000000]  [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on 
node 0
[    0.000000]  [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on 
node 0
[    0.000000]  [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on 
node 0
[    0.000000]  [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on 
node 0
[    0.000000]  [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on 
node 0
[    0.000000]  [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on 
node 0
[    0.000000]  [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on 
node 0
[    0.000000]  [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on 
node 0
[    0.000000]  [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on 
node 0
[    0.000000]  [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on 
node 0
[    0.000000]  [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on 
node 0
[    0.000000]  [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on 
node 0
[    0.000000]  [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on 
node 0
[    0.000000]  [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on 
node 0
[    0.000000]  [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on 
node 0
[    0.000000]  [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on 
node 0
[    0.000000]  [ffffe20003200000-ffffe200033fffff] PMD ->ffff810007600000 on 
node 0
[    0.000000]  [ffffe20003400000-ffffe200035fffff] PMD ->ffff810007a00000 on 
node 0
[    0.000000]  [ffffe20003600000-ffffe200037fffff] PMD ->ffff810007e00000 on 
node 0
[    0.000000]  [ffffe20003800000-ffffe200039fffff] PMD ->ffff810008200000 on 
node 0
[    0.000000]  [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810008600000 on 
node 0
[    0.000000]  [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810008a00000 on 
node 0
[    0.000000]  [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008e00000 on 
node 0
[    0.000000]  [ffffe20004000000-ffffe200041fffff] PMD ->ffff810009200000 on 
node 0
[    0.000000]  [ffffe20004200000-ffffe200043fffff] PMD ->ffff810009600000 on 
node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 936 pages reserved
[    0.000000]   DMA zone: 3007 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 
00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 
00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 
0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffb0000 - 
00000000cffc0000
[    0.000000] PM: Registered nosave memory: 00000000cffc0000 - 
00000000cfff0000
[    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 
00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 
00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 
00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 
00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 
00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 
00000000ff380000
[    0.000000] PM: Registered nosave memory: 00000000ff380000 - 
0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: 
d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 32584 bytes of per cpu data
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total 
pages: 1030439
[    0.000000] Kernel command line: pci=nomsi root=/dev/sda3 nmi_watchdog=0 
console=tty6ÿ       ëMítHt$01Ò¿
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] TSC calibrated against PM_TIMER
[    0.000000] Marking TSC unstable due to TSCs unsynchronized
[    0.000002] time.c: Detected 3013.881 MHz processor.
[    0.000011] spurious 8259A interrupt: IRQ7.
[    0.003333] Console: colour VGA+ 80x25
[    0.003333] console [tty6] enabled
[    0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 
bytes)
[    0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 
bytes)
[    0.003333] Checking aperture...
[    0.003333] Node 0: aperture @ c000000 size 32 MB
[    0.003333] Aperture pointing to e820 RAM. Ignoring.
[    0.003333] No AGP bridge found
[    0.003333] Your BIOS doesn't leave a aperture memory hole
[    0.003333] Please enable the IOMMU option in the BIOS setup
[    0.003333] This costs you 64 MB of RAM
[    0.003333] Mapping aperture over 65536 KB of RAM @ c000000
[    0.003333] PM: Registered nosave memory: 000000000c000000 - 
0000000010000000
[    0.003333] Memory: 4047432k/4980736k available (2240k kernel code, 145456k 
reserved, 933k data, 192k init)
[    0.003333] CPA: page pool initialized 1 of 1 pages preallocated
[    0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, 
Nodes=1
[    0.003333] hpet clockevent registered
[    0.083330] Calibrating delay using timer specific routine.. 6034.70 
BogoMIPS (lpj=10053922)
[    0.083419] Mount-cache hash table entries: 256
[    0.083537] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[    0.083577] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.083615] CPU: Physical Processor ID: 0
[    0.083651] CPU: Processor Core ID: 0
[    0.083700] ACPI: Core revision 20070126
[    0.122312] Using local APIC timer interrupts.
[    0.123326] APIC timer calibration result 12557839
[    0.123327] Detected 12.557 MHz APIC timer.
[    0.123428] Booting processor 1/2 APIC 0x1
[    0.003333] Initializing CPU#1
[    0.003333] Calibrating delay using timer specific routine.. 6030.95 
BogoMIPS (lpj=10046321)
[    0.003333] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line)
[    0.003333] CPU: L2 Cache: 1024K (64 bytes/line)
[    0.003333] CPU: Physical Processor ID: 0
[    0.003333] CPU: Processor Core ID: 1
[    0.003333] AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[    0.216844] Brought up 2 CPUs
[    0.217291] net_namespace: 296 bytes
[    0.217409] NET: Registered protocol family 16
[    0.217503] No dock devices found.
[    0.217565] ACPI: bus type pci registered
[    0.217642] PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
[    0.217681] PCI: Not using MMCONFIG.
[    0.217718] PCI: Using configuration type 1
[    0.220744] ACPI: EC: Look up EC in DSDT
[    0.224960] ACPI: Interpreter enabled
[    0.224998] ACPI: (supports S0 S1 S3 S4 S5)
[    0.225169] ACPI: Using IOAPIC for interrupt routing
[    0.225345] ACPI: Error attaching device data
[    0.225385] ACPI: Error attaching device data
[    0.225424] ACPI: Error attaching device data
[    0.225464] ACPI: Error attaching device data
[    0.231383] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.231918] PCI: Transparent bridge - 0000:00:08.0
[    0.232173] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.232323] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.232434] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[    0.232498] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[    0.232563] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[    0.232628] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[    0.237207] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[    0.237568] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[    0.237927] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, 
disabled.
[    0.238312] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, 
disabled.
[    0.238697] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, 
disabled.
[    0.239083] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[    0.239443] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, 
disabled.
[    0.239829] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[    0.240290] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[    0.240650] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, 
disabled.
[    0.241037] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[    0.241397] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, 
disabled.
[    0.241783] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, 
disabled.
[    0.242169] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[    0.242528] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, 
disabled.
[    0.242914] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[    0.243274] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, 
disabled.
[    0.243716] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, 
disabled.
[    0.244103] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, 
disabled.
[    0.244490] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, 
disabled.
[    0.244819] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.244868] pnp: PnP ACPI init
[    0.244907] ACPI: bus type pnp registered
[    0.248071] pnp: PnP ACPI: found 13 devices
[    0.248108] ACPI: ACPI bus type pnp unregistered
[    0.248214] SCSI subsystem initialized
[    0.248284] libata version 3.00 loaded.
[    0.248322] usbcore: registered new interface driver usbfs
[    0.248373] usbcore: registered new interface driver hub
[    0.248428] usbcore: registered new device driver usb
[    0.248507] PCI: Using ACPI for IRQ routing
[    0.248545] PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
[    0.273316] PCI-DMA: Disabling AGP.
[    0.273316] PCI-DMA: aperture base @ c000000 size 65536 KB
[    0.273316] PCI-DMA: using GART IOMMU.
[    0.273316] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.273316] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.273316] hpet0: 3 32-bit timers, 25000000 Hz
[    0.273325] Switched to high resolution mode on CPU 0
[    0.066836] Switched to high resolution mode on CPU 1
[    0.286685] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[    0.286685] system 00:05: ioport range 0x800-0x80f has been reserved
[    0.286685] system 00:05: ioport range 0x2000-0x207f has been reserved
[    0.286685] system 00:05: ioport range 0x2080-0x20ff has been reserved
[    0.286685] system 00:05: ioport range 0x2400-0x247f has been reserved
[    0.286685] system 00:05: ioport range 0x2480-0x24ff has been reserved
[    0.286685] system 00:05: ioport range 0x2800-0x287f has been reserved
[    0.286685] system 00:05: ioport range 0x2880-0x28ff has been reserved
[    0.286688] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[    0.286728] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[    0.286767] system 00:05: iomem range 0x0-0x0 could not be reserved
[    0.286807] system 00:05: iomem range 0xfee01000-0xfeefffff has been 
reserved
[    0.286851] system 00:07: iomem range 0xfec00000-0xfec00fff could not be 
reserved
[    0.286899] system 00:07: iomem range 0xfee00000-0xfee00fff could not be 
reserved
[    0.286950] system 00:0a: ioport range 0x290-0x29f has been reserved
[    0.286993] system 00:0b: iomem range 0xe0000000-0xefffffff has been 
reserved
[    0.287036] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[    0.287076] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[    0.287116] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[    0.287161] system 00:0c: iomem range 0x100000-0xcfffffff could not be 
reserved
[    0.287209] system 00:0c: iomem range 0xff380000-0xffffffff could not be 
reserved
[    0.287661] PCI: Bridge: 0000:00:08.0
[    0.287698]   IO window: d000-dfff
[    0.287735]   MEM window: 0xf9f00000-0xf9ffffff
[    0.287774]   PREFETCH window: 0x00000000f0000000-0x00000000f00fffff
[    0.287815] PCI: Bridge: 0000:00:0b.0
[    0.287851]   IO window: c000-cfff
[    0.287888]   MEM window: 0xf9e00000-0xf9efffff
[    0.287926]   PREFETCH window: disabled.
[    0.287963] PCI: Bridge: 0000:00:0c.0
[    0.287999]   IO window: disabled.
[    0.288036]   MEM window: disabled.
[    0.288073]   PREFETCH window: disabled.
[    0.288111] PCI: Bridge: 0000:00:0d.0
[    0.288147]   IO window: e000-efff
[    0.288184]   MEM window: 0xfa000000-0xfebfffff
[    0.288222]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[    0.288262] PCI: Bridge: 0000:00:0e.0
[    0.288298]   IO window: disabled.
[    0.288334]   MEM window: disabled.
[    0.288371]   PREFETCH window: disabled.
[    0.288414] PCI: Setting latency timer of device 0000:00:08.0 to 64
[    0.288423] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.288429] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.288434] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.288438] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.288445] NET: Registered protocol family 2
[    0.323349] IP route cache hash table entries: 131072 (order: 8, 1048576 
bytes)
[    0.323349] TCP established hash table entries: 262144 (order: 10, 4194304 
bytes)
[    0.323349] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.323349] TCP: Hash tables configured (established 262144 bind 65536)
[    0.323349] TCP reno registered
[    0.333656] Loading Reiser4. See www.namesys.com for a description of 
Reiser4.
[    0.333662] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
254)
[    0.333662] io scheduler noop registered
[    0.333662] io scheduler cfq registered (default)
[    0.333662] pci 0000:00:00.0: Enabling HT MSI Mapping
[    0.333662] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.333662] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.333662] pci 0000:00:0b.0: Enabling HT MSI Mapping
[    0.333662] pci 0000:00:0c.0: Enabling HT MSI Mapping
[    0.333662] pci 0000:00:0d.0: Enabling HT MSI Mapping
[    0.333662] pci 0000:00:0e.0: Enabling HT MSI Mapping
[    0.333662] pci 0000:04:00.0: Boot video device
[    0.333670] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[    0.333670] assign_interrupt_mode Found MSI capability
[    0.333670] Allocate Port Service[0000:00:0b.0:pcie00]
[    0.333677] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[    0.333677] assign_interrupt_mode Found MSI capability
[    0.333677] Allocate Port Service[0000:00:0c.0:pcie00]
[    0.333684] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    0.333684] assign_interrupt_mode Found MSI capability
[    0.333684] Allocate Port Service[0000:00:0d.0:pcie00]
[    0.333690] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[    0.333690] assign_interrupt_mode Found MSI capability
[    0.333690] Allocate Port Service[0000:00:0e.0:pcie00]
[    0.333731] input: Power Button (FF) as /class/input/input0
[    0.333731] ACPI: Power Button (FF) [PWRF]
[    0.333738] input: Power Button (CM) as /class/input/input1
[    0.333738] ACPI: Power Button (CM) [PWRB]
[    0.333771] ACPI: ACPI0007:00 is registered as cooling_device0
[    0.333778] ACPI: ACPI0007:01 is registered as cooling_device1
[    0.367146] Real Time Clock Driver v1.12ac
[    0.367150] hpet_resources: 0xfed00000 is busy
[    0.367157] Linux agpgart interface v0.103
[    0.367177] Driver 'sd' needs updating - please use bus_type methods
[    0.367189] ahci 0000:00:0a.0: version 3.0
[    0.367189] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[    0.367189] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 
(level, low) -> IRQ 23
[    0.470521] AHCI_EN failed i=0
[    1.572680] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf 
impl SATA mode
[    1.572680] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[    1.572680] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[    1.572682] scsi0 : ahci
[    1.572692] scsi1 : ahci
[    1.572701] scsi2 : ahci
[    1.572711] scsi3 : ahci
[    1.572717] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 
irq 23
[    1.572717] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 
irq 23
[    1.572717] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 
irq 23
[    1.572717] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 
irq 23
[    2.010056] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.010552] ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
[    2.010552] ata1.00: 312581808 sectors, multi 16: LBA48
[    2.011132] ata1.00: configured for UDMA/133
[    2.643013] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.663511] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[    2.663511] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    2.665420] ata2.00: configured for UDMA/133
[    2.982665] ata3: SATA link down (SStatus 0 SControl 300)
[    3.302534] ata4: SATA link down (SStatus 0 SControl 300)
[    3.499383] scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600JS-00M 10.0 
PQ: 0 ANSI: 5
[    3.499400] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[    3.499400] sd 0:0:0:0: [sda] Write Protect is off
[    3.499400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.499400] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    3.499400] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 
MB)
[    3.499400] sd 0:0:0:0: [sda] Write Protect is off
[    3.499400] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.499400] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    3.499400]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.336734] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.336745] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.336750] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 
PQ: 0 ANSI: 5
[    3.336757] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[    3.336757] sd 1:0:0:0: [sdb] Write Protect is off
[    3.336757] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.336757] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    3.336757] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 
MB)
[    3.336757] sd 1:0:0:0: [sdb] Write Protect is off
[    3.336757] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.336757] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    3.336757]  sdb: sdb1 sdb2
[    3.383500] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.383510] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    3.383517] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 
irq 1,12
[    3.383612] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.383612] serio: i8042 AUX port at 0x60,0x64 irq 12
[    3.413630] usbcore: registered new interface driver usbhid
[    3.413630] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[    3.413630] TCP cubic registered
[    3.413630] NET: Registered protocol family 1
[    3.413635] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 
6000+ processors (2 cpu cores) (version 2.20.00)
[    3.611878] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[    3.611878] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[    3.611878] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[    3.611878] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[    3.611878] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[    3.611878] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[    3.611878] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[    3.611878] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[    3.442917] input: AT Translated Set 2 keyboard as /class/input/input2
[    3.541535] ReiserFS: sda3: found reiserfs format "3.6" with standard 
journal
[    3.541579] ReiserFS: sda3: using ordered data mode
[    3.552592] ReiserFS: sda3: journal params: device sda3, size 8192, journal 
first block 18, max trans len 1024, max batch 900, max commit age 30, max 
trans age 30
[    3.552592] ReiserFS: sda3: checking transaction log (sda3)
[    3.598972] ReiserFS: sda3: Using r5 hash to sort names
[    3.598972] VFS: Mounted root (reiserfs filesystem) readonly.
[    3.598972] Freeing unused kernel memory: 192k freed
[    3.975260] Clocksource tsc unstable (delta = -137536132 ns)
[    6.849124] r8169 Gigabit Ethernet driver 2.2LK loaded
[    6.849359] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[    6.849364] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 
(level, low) -> IRQ 19
[    6.849373] PCI: Setting latency timer of device 0000:01:00.0 to 64
[    6.849381] r8169 0000:01:00.0: no MSI. Back to INTx.
[    6.849527] eth0: RTL8168b/8111b at 0xffffc20000170000, 00:19:66:47:f3:cb, 
XID 38000000 IRQ 19
[    6.904115] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[    6.904121] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 
(level, low) -> IRQ 22
[    6.904128] PCI: Setting latency timer of device 0000:00:02.1 to 64
[    6.904130] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    6.907044] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus 
number 1
[    6.907069] ehci_hcd 0000:00:02.1: debug port 1
[    6.907071] PCI: cache line size of 64 is not supported by device 
0000:00:02.1
[    6.907079] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[    6.919982] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 
Dec 2004
[    6.919982] usb usb1: configuration #1 chosen from 1 choice
[    6.919982] hub 1-0:1.0: USB hub found
[    6.919982] hub 1-0:1.0: 10 ports detected
[    7.276306] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    7.404183] usb 1-3: configuration #1 chosen from 1 choice
[    7.404183] hub 1-3:1.0: USB hub found
[    7.404302] hub 1-3:1.0: 4 ports detected
[    7.716532] usb 1-3.1: new low speed USB device using ehci_hcd and address 
3
[    7.808210] usb 1-3.1: configuration #1 chosen from 1 choice
[    7.820564] input: Logitech USB Receiver as /class/input/input3
[    7.839764] input: USB HID v1.11 Mouse [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[    7.841500] input: Logitech USB Receiver as /class/input/input4
[    7.893869] input: USB HID v1.11 Device [Logitech USB Receiver] on 
usb-0000:00:02.1-3.1
[    7.971393] mice: PS/2 mouse device common for all mice
[    9.611430] ReiserFS: sda3: switching to journaled data mode
[    9.737449] reiser4: sdb2: found disk format 4.0.0.
[   35.261279] reiser4: sda6: found disk format 4.0.0.
[   36.657701] reiser4: sdb1: found disk format 4.0.0.
[   37.856117] Adding 1951888k swap on /dev/sda2.  Priority:-1 extents:1 
across:1951888k
[   39.210462] r8169: eth0: link up
[   39.210466] r8169: eth0: link up
[   39.262963] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[   39.262968] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 
(level, low) -> IRQ 18
[   39.266285] Audigy2 value: Special config.
[   40.373183] i2c /dev entries driver
[   40.426512] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[   40.426512] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
[   40.811375] w83627ehf: Found W83627EHG chip at 0x290
[   49.334910] nvidia: module license 'NVIDIA' taints kernel.
[   49.593955] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 17
[   49.593963] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNED] -> GSI 17 
(level, low) -> IRQ 17
[   49.593969] PCI: Setting latency timer of device 0000:04:00.0 to 64
[   49.594415] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  173.08  Wed Apr  
2 07:55:48 PST 2008
[   50.026675] NVRM: bad caching on address 0xffff81012b3e1000: actual 
0x173 != expected 0x17b
[   50.026679] NVRM: please see the README section on Cache Aliasing for more 
information
[   50.026984] NVRM: bad caching on address 0xffff81012e182000: actual 
0x173 != expected 0x17b
[   50.027029] NVRM: bad caching on address 0xffff81012e161000: actual 
0x173 != expected 0x17b
[   50.027071] NVRM: bad caching on address 0xffff81012e151000: actual 
0x173 != expected 0x17b
[   50.027113] NVRM: bad caching on address 0xffff81012b39a000: actual 
0x173 != expected 0x17b
[   50.027152] NVRM: bad caching on address 0xffff81012e153000: actual 
0x173 != expected 0x17b
[   50.027191] NVRM: bad caching on address 0xffff81012e2d8000: actual 
0x173 != expected 0x17b
[   50.027239] NVRM: bad caching on address 0xffff81012b20c000: actual 
0x173 != expected 0x17b
[   50.027305] NVRM: bad caching on address 0xffff81012ad4f000: actual 
0x173 != expected 0x17b
[   50.027346] NVRM: bad caching on address 0xffff81012f3a3000: actual 
0x173 != expected 0x17b



^ permalink raw reply	[flat|nested] 52+ messages in thread

* Re: 2.6.24.X: SATA/AHCI related boot delay. - not with 2.6.24.3
  2008-04-22 14:11                                                                   ` Tejun Heo
  2008-04-22 15:12                                                                     ` Volker Armin Hemmann
@ 2008-05-29 14:54                                                                     ` Hemmann, Volker Armin
  2008-05-30  4:19                                                                       ` Tejun Heo
  1 sibling, 1 reply; 52+ messages in thread
From: Hemmann, Volker Armin @ 2008-05-29 14:54 UTC (permalink / raw)
  To: Tejun Heo; +Cc: Peer Chen, Jeff Garzik, linux-kernel, linux-ide, Kuan Luo

[-- Attachment #1: Type: text/plain, Size: 2359 bytes --]

Hi,

Since 2.6.26-rc4 is out, I updated the bios and replaced one harddisk I 
think its time for a status report ;)

Bios is now version 2.10 from 05/12/2008
 (http://www.asrock.com/mb/download.asp?Model=ALiveNF5-eSATA2%2b&s=AM2)

-AHCI+nomsi: boots fine. Works fine. But: I still can not enable ncq
-AHCI+msi: the usual. No harddisks found, waiting for the timeouts, then 
kernel panic because of missing root.

-NON-RAID/IDE+msi: works fine. No delays. No NCQ (not surprising since mobos 
handbook says that AHCI mode is required).
-NON-RAID/IDE+nomsi: see above.

Attached are kernel config used, lspci outputs and dmesgs. lspci was done 
straight after boot without the nvidia-module loaded. Kernel is patched with 
reiser4. 

One thing that confuses me is this:
echo 31 > /sys/block/sda/device/queue_depth
echo: write error: invalid argument

but:
[14315325.624510] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 
0xf impl SATA mode
[14315325.624559] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio
[14315325.624599] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[14315325.626674] scsi0 : ahci
[14315325.626674] scsi1 : ahci
[14315325.626674] scsi2 : ahci
[14315325.626674] scsi3 : ahci
[14315325.626674] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 
0xf9dfc100 irq 23
[14315325.626674] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 
0xf9dfc180 irq 23
[14315325.626674] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 
0xf9dfc200 irq 23
[14315325.626674] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 
0xf9dfc280 irq 23
[14315325.943951] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14315325.950222] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[14315325.950222] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[14315325.953942] ata1.00: configured for UDMA/133
[14315326.273949] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14315326.286509] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[14315326.286509] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[14315326.286509] ata2.00: configured for UDMA/133

shouldn't controller and harddisks support turning on NCQ? The handbooks says 
that NCQ is supported in AHCI mode and the harddisks doesn't seem to be 
blacklisted.

Glück Auf,
Volker

[-- Attachment #2: dmesg_2.6.26_rc4_reiser_non_raid_coldboot --]
[-- Type: text/plain, Size: 31960 bytes --]

[    0.000000] Linux version 2.6.26-rc4 (root@energy) (gcc version 4.2.4 (Gentoo 4.2.4 p1.0)) #1 SMP Thu May 29 04:02:44 CEST 2008
[    0.000000] Command line: root=/dev/sda3 nmi_watchdog=0ÿÿ¿
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cffb0000 (usable)
[    0.000000]  BIOS-e820: 00000000cffb0000 - 00000000cffc0000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffc0000 - 00000000cfff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cfff0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff380000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000] max_pfn_mapped = 1245184
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] init_memory_mapping
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP 000F98F0, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT CFFB0000, 003C (r1 A M I  OEMRSDT   4000809 MSFT       97)
[    0.000000] ACPI: FACP CFFB0200, 0084 (r2 A M I  OEMFACP  12000601 MSFT       97)
[    0.000000] ACPI: DSDT CFFB0450, 4FFA (r1  ASR19 ASR19201      201 INTL 20051117)
[    0.000000] ACPI: FACS CFFC0000, 0040
[    0.000000] ACPI: APIC CFFB0390, 0080 (r1 A M I  OEMAPIC   4000809 MSFT       97)
[    0.000000] ACPI: MCFG CFFB0410, 003C (r1 A M I  OEMMCFG   4000809 MSFT       97)
[    0.000000] ACPI: OEMB CFFC0040, 0060 (r1 A M I  AMI_OEM   4000809 MSFT       97)
[    0.000000] ACPI: HPET CFFB5450, 0038 (r1 A M I  OEMHPET0  4000809 MSFT       97)
[    0.000000] ACPI: SSDT CFFB5490, 030E (r1 A M I  POWERNOW        1 AMD         1)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 256 used
[    0.000000] Entering add_active_range(0, 256, 851888) 1 entries of 256 used
[    0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 256 used
[    0.000000]   early res: 0 [0-fff] BIOS data page
[    0.000000]   early res: 1 [6000-7fff] TRAMPOLINE
[    0.000000]   early res: 2 [200000-59fa33] TEXT DATA BSS
[    0.000000]   early res: 3 [9fc00-fffff] BIOS reserved
[    0.000000]   early res: 4 [8000-dfff] PGTABLE
[    0.000000]  [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0
[    0.000000]  [ffffe20002e00000-ffffe200043fffff] PMD -> [ffff81000c000000-ffff81000d5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1245184
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   851888
[    0.000000]     0:  1048576 ->  1245184
[    0.000000] On node 0 totalpages: 1048399
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1032 pages reserved
[    0.000000]   DMA zone: 2911 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833512 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Detected use of extended apic ids on hypertransport bus
[    0.000000] ACPI: PM-Timer IO Port: 0x2008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Setting APIC routing to flat
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[    0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cffb0000 - 00000000cffc0000
[    0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000cfff0000
[    0.000000] PM: Registered nosave memory: 00000000cfff0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ff380000
[    0.000000] PM: Registered nosave memory: 00000000ff380000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 33264 bytes of per cpu data
[    0.000000] NR_CPUS: 2, nr_cpu_ids: 2
[14315324.233334] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1030343
[14315324.233334] Kernel command line: root=/dev/sda3 nmi_watchdog=0ÿÿ¿
[14315324.233334] Initializing CPU#0
[14315324.233334] PID hash table entries: 4096 (order: 12, 32768 bytes)
[14315324.233334] TSC calibrated against PM_TIMER
[14315324.233334] Marking TSC unstable due to TSCs unsynchronized
[14315324.233334] time.c: Detected 3013.886 MHz processor.
[14315324.233334] spurious 8259A interrupt: IRQ7.
[14315324.233334] Console: colour VGA+ 80x25
[14315324.233334] console [tty0] enabled
[14315324.233334] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[14315324.233334] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[14315324.233334] Checking aperture...
[14315324.233334] Node 0: aperture @ ecca000000 size 32 MB
[14315324.233334] Aperture beyond 4GB. Ignoring.
[14315324.233334] No AGP bridge found
[14315324.233334] Your BIOS doesn't leave a aperture memory hole
[14315324.233334] Please enable the IOMMU option in the BIOS setup
[14315324.233334] This costs you 64 MB of RAM
[14315324.233334] Mapping aperture over 65536 KB of RAM @ 4000000
[14315324.233334] PM: Registered nosave memory: 0000000004000000 - 0000000008000000
[14315324.233334] Memory: 4047800k/4980736k available (2232k kernel code, 145356k reserved, 912k data, 204k init)
[14315324.233334] CPA: page pool initialized 1 of 1 pages preallocated
[14315324.233334] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[14315324.233334] hpet clockevent registered
[14315324.316485] Calibrating delay using timer specific routine.. 6034.80 BogoMIPS (lpj=10054083)
[14315324.316576] Mount-cache hash table entries: 256
[14315324.316662] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[14315324.316662] CPU: L2 Cache: 1024K (64 bytes/line)
[14315324.316662] CPU: Physical Processor ID: 0
[14315324.316662] CPU: Processor Core ID: 0
[14315324.316662] ACPI: Core revision 20080321
[14315324.353326] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[14315324.353426] Using local APIC timer interrupts.
[14315324.359992] APIC timer calibration result 12557862
[14315324.359992] Detected 12.557 MHz APIC timer.
[14315324.360104] Booting processor 1/1 ip 6000
[14315324.360104] Initializing CPU#1
[14315324.360104] Calibrating delay using timer specific routine.. 6030.97 BogoMIPS (lpj=10046354)
[14315324.360104] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[14315324.360104] CPU: L2 Cache: 1024K (64 bytes/line)
[14315324.360104] CPU: Physical Processor ID: 0
[14315324.360104] CPU: Processor Core ID: 1
[14315324.360104] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[14315324.453718] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
[14315324.454105] Brought up 2 CPUs
[14315324.454142] Total of 2 processors activated (12065.77 BogoMIPS).
[14315324.456653] net_namespace: 360 bytes
[14315324.456653] NET: Registered protocol family 16
[14315324.456653] No dock devices found.
[14315324.456653] node 0 link 0: io port [1000, ffffff]
[14315324.456653] node 0 link 0: io port [2000, 2fff]
[14315324.456653] TOM: 00000000d0000000 aka 3328M
[14315324.456653] node 0 link 0: mmio [e0000000, efffffff]
[14315324.456653] node 0 link 0: mmio [a0000, bffff]
[14315324.456653] node 0 link 0: mmio [d0000000, fe0bffff]
[14315324.456653] TOM2: 0000000130000000 aka 4864M
[14315324.456653] bus: [00,07] on node 0 link 0
[14315324.456653] bus: 00 index 0 io port: [0, ffff]
[14315324.456653] bus: 00 index 1 mmio: [d0000000, ffffffff]
[14315324.456653] bus: 00 index 2 mmio: [a0000, bffff]
[14315324.456653] bus: 00 index 3 mmio: [130000000, fcffffffff]
[14315324.456653] ACPI: bus type pci registered
[14315324.456653] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[14315324.456653] PCI: Not using MMCONFIG.
[14315324.456653] PCI: Using configuration type 1 for base access
[14315324.456653] ACPI: EC: Look up EC in DSDT
[14315324.463319] ACPI: Interpreter enabled
[14315324.463319] ACPI: (supports S0 S1 S3 S4 S5)
[14315324.463319] ACPI: Using IOAPIC for interrupt routing
[14315324.463319] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[14315324.467063] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[14315324.475560] PCI: Using MMCONFIG at e0000000 - efffffff
[14315324.483318] ACPI: PCI Root Bridge [PCI0] (0000:00)
[14315324.483318] PCI: Transparent bridge - 0000:00:08.0
[14315324.483318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[14315324.483318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[14315324.483318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
[14315324.483394] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
[14315324.483469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[14315324.483543] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
[14315324.489984] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *11
[14315324.489984] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5
[14315324.489984] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[14315324.489984] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[14315324.489984] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
[14315324.490383] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *10
[14315324.490746] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
[14315324.491144] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
[14315324.491507] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
[14315324.491871] ACPI: PCI Interrupt Link [LMAD] (IRQs 20 21 22 23) *0, disabled.
[14315324.492268] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7
[14315324.492632] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[14315324.493034] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
[14315324.493317] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[14315324.493683] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
[14315324.494079] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *15
[14315324.494443] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled.
[14315324.494868] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[14315324.495265] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *0, disabled.
[14315324.495662] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *0, disabled.
[14315324.496621] Linux Plug and Play Support v0.97 (c) Adam Belay
[14315324.496650] pnp: PnP ACPI init
[14315324.496650] ACPI: bus type pnp registered
[14315324.499983] pnp: PnP ACPI: found 13 devices
[14315324.503316] ACPI: ACPI bus type pnp unregistered
[14315324.503316] SCSI subsystem initialized
[14315324.503316] libata version 3.00 loaded.
[14315324.503316] usbcore: registered new interface driver usbfs
[14315324.503316] usbcore: registered new interface driver hub
[14315324.506649] usbcore: registered new device driver usb
[14315324.506649] PCI: Using ACPI for IRQ routing
[14315324.523315] PCI-DMA: Disabling AGP.
[14315324.523315] PCI-DMA: aperture base @ 4000000 size 65536 KB
[14315324.523315] PCI-DMA: using GART IOMMU.
[14315324.523315] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[14315324.523315] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[14315324.523315] hpet0: 3 32-bit timers, 25000000 Hz
[14315324.524232] Switched to high resolution mode on CPU 0
[14315324.524232] Switched to high resolution mode on CPU 1
[14315324.527599] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[14315324.527640] system 00:05: ioport range 0x800-0x80f has been reserved
[14315324.527680] system 00:05: ioport range 0x2000-0x207f has been reserved
[14315324.527720] system 00:05: ioport range 0x2080-0x20ff has been reserved
[14315324.527760] system 00:05: ioport range 0x2400-0x247f has been reserved
[14315324.527800] system 00:05: ioport range 0x2480-0x24ff has been reserved
[14315324.527840] system 00:05: ioport range 0x2800-0x287f has been reserved
[14315324.527880] system 00:05: ioport range 0x2880-0x28ff has been reserved
[14315324.527920] system 00:05: ioport range 0x2c00-0x2c7f has been reserved
[14315324.527960] system 00:05: ioport range 0x2c80-0x2cff has been reserved
[14315324.528001] system 00:05: iomem range 0x0-0xffffffffffffffff could not be reserved
[14315324.528050] system 00:05: iomem range 0xfee01000-0xfeefffff could not be reserved
[14315324.528103] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[14315324.528152] system 00:07: iomem range 0xfee00000-0xfee00fff could not be reserved
[14315324.528205] system 00:0a: ioport range 0x290-0x29f has been reserved
[14315324.528249] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[14315324.528301] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
[14315324.528341] system 00:0c: iomem range 0xc0000-0xcffff has been reserved
[14315324.528381] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
[14315324.528430] system 00:0c: iomem range 0x100000-0xcfffffff could not be reserved
[14315324.528478] system 00:0c: iomem range 0xff380000-0xffffffff could not be reserved
[14315324.530006] PCI: Bridge: 0000:00:08.0
[14315324.530006]   IO window: d000-dfff
[14315324.530006]   MEM window: 0xf9f00000-0xf9ffffff
[14315324.530006]   PREFETCH window: 0x00000000f0000000-0x00000000f00fffff
[14315324.530006] PCI: Bridge: 0000:00:0b.0
[14315324.530006]   IO window: c000-cfff
[14315324.530006]   MEM window: 0xf9e00000-0xf9efffff
[14315324.530006]   PREFETCH window: disabled.
[14315324.530006] PCI: Bridge: 0000:00:0c.0
[14315324.530006]   IO window: disabled.
[14315324.530006]   MEM window: disabled.
[14315324.530006]   PREFETCH window: disabled.
[14315324.530006] PCI: Bridge: 0000:00:0d.0
[14315324.530006]   IO window: e000-efff
[14315324.530006]   MEM window: 0xfa000000-0xfebfffff
[14315324.530006]   PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
[14315324.530006] PCI: Bridge: 0000:00:0e.0
[14315324.530006]   IO window: disabled.
[14315324.530006]   MEM window: disabled.
[14315324.530006]   PREFETCH window: disabled.
[14315324.530006] PCI: Setting latency timer of device 0000:00:08.0 to 64
[14315324.530006] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[14315324.530006] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[14315324.530006] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[14315324.530006] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[14315324.530006] NET: Registered protocol family 2
[14315324.557696] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[14315324.558289] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[14315324.559973] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[14315324.560006] TCP: Hash tables configured (established 262144 bind 65536)
[14315324.560006] TCP reno registered
[14315324.567096] NET: Registered protocol family 1
[14315324.570006] Loading Reiser4. See www.namesys.com for a description of Reiser4.
[14315324.570006] msgmni has been set to 7906 for ipc namespace ffffffff804f9180
[14315324.570006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[14315324.570006] io scheduler noop registered
[14315324.570006] io scheduler cfq registered (default)
[14315324.570006] pci 0000:00:00.0: Enabling HT MSI Mapping
[14315324.570006] pci 0000:00:08.0: Enabling HT MSI Mapping
[14315324.570006] pci 0000:00:0a.0: Enabling HT MSI Mapping
[14315324.570006] pci 0000:00:0b.0: Enabling HT MSI Mapping
[14315324.570006] pci 0000:00:0c.0: Enabling HT MSI Mapping
[14315324.570006] pci 0000:00:0d.0: Enabling HT MSI Mapping
[14315324.570006] pci 0000:00:0e.0: Enabling HT MSI Mapping
[14315324.570006] pci 0000:04:00.0: Boot video device
[14315324.570006] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[14315324.570006] assign_interrupt_mode Found MSI capability
[14315324.570006] Allocate Port Service[0000:00:0b.0:pcie00]
[14315324.570006] Allocate Port Service[0000:00:0b.0:pcie03]
[14315324.570006] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[14315324.570006] assign_interrupt_mode Found MSI capability
[14315324.570006] Allocate Port Service[0000:00:0c.0:pcie00]
[14315324.570006] Allocate Port Service[0000:00:0c.0:pcie03]
[14315324.570006] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[14315324.570006] assign_interrupt_mode Found MSI capability
[14315324.570006] Allocate Port Service[0000:00:0d.0:pcie00]
[14315324.570006] Allocate Port Service[0000:00:0d.0:pcie03]
[14315324.570006] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[14315324.570006] assign_interrupt_mode Found MSI capability
[14315324.570006] Allocate Port Service[0000:00:0e.0:pcie00]
[14315324.570006] Allocate Port Service[0000:00:0e.0:pcie03]
[14315324.570006] input: Power Button (FF) as /class/input/input0
[14315324.570006] ACPI: Power Button (FF) [PWRF]
[14315324.570006] input: Power Button (CM) as /class/input/input1
[14315324.570006] ACPI: Power Button (CM) [PWRB]
[14315324.573340] ACPI: ACPI0007:00 is registered as cooling_device0
[14315324.573340] ACPI: ACPI0007:01 is registered as cooling_device1
[14315324.606671] Real Time Clock Driver v1.12ac
[14315324.606671] hpet_resources: 0xfed00000 is busy
[14315324.606671] Linux agpgart interface v0.103
[14315324.606671] Driver 'sd' needs updating - please use bus_type methods
[14315324.606671] ahci 0000:00:0a.0: version 3.0
[14315324.606671] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[14315324.606671] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 23
[14315325.606686] ahci 0000:00:0a.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[14315325.606735] ahci 0000:00:0a.0: flags: 64bit sntf led clo pmp pio 
[14315325.606775] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[14315325.610007] scsi0 : ahci
[14315325.610007] scsi1 : ahci
[14315325.610007] scsi2 : ahci
[14315325.610007] scsi3 : ahci
[14315325.610007] ata1: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc100 irq 315
[14315325.610007] ata2: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc180 irq 315
[14315325.610007] ata3: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc200 irq 315
[14315325.610007] ata4: SATA max UDMA/133 abar m8192@0xf9dfc000 port 0xf9dfc280 irq 315
[14315325.927280] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14315325.933553] ata1.00: ATA-7: SAMSUNG HD502IJ, 1AA01109, max UDMA7
[14315325.933553] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[14315325.937271] ata1.00: configured for UDMA/133
[14315326.258066] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[14315326.278501] ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7
[14315326.278501] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[14315326.278501] ata2.00: configured for UDMA/133
[14315326.597278] ata3: SATA link down (SStatus 0 SControl 300)
[14315326.917278] ata4: SATA link down (SStatus 0 SControl 300)
[14315326.917278] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD502IJ  1AA0 PQ: 0 ANSI: 5
[14315326.917278] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[14315326.917278] sd 0:0:0:0: [sda] Write Protect is off
[14315326.917278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[14315326.917278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[14315326.917278] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[14315326.917278] sd 0:0:0:0: [sda] Write Protect is off
[14315326.917278] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[14315326.917278] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[14315326.917278]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[14315326.941437] sd 0:0:0:0: [sda] Attached SCSI disk
[14315326.941437] sd 0:0:0:0: Attached scsi generic sg0 type 0
[14315326.941437] scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD501LJ  CR10 PQ: 0 ANSI: 5
[14315326.941437] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[14315326.941437] sd 1:0:0:0: [sdb] Write Protect is off
[14315326.941437] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[14315326.941437] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[14315326.948122] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[14315326.948177] sd 1:0:0:0: [sdb] Write Protect is off
[14315326.948215] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[14315326.948232] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[14315326.948282]  sdb: sdb1 sdb2
[14315327.009488] sd 1:0:0:0: [sdb] Attached SCSI disk
[14315327.009488] sd 1:0:0:0: Attached scsi generic sg1 type 0
[14315327.009488] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[14315327.012918] serio: i8042 KBD port at 0x60,0x64 irq 1
[14315327.012959] serio: i8042 AUX port at 0x60,0x64 irq 12
[14315327.041436] cpuidle: using governor ladder
[14315327.041436] cpuidle: using governor menu
[14315327.041436] usbcore: registered new interface driver usbhid
[14315327.041436] usbhid: v2.6:USB HID core driver
[14315327.041436] TCP cubic registered
[14315327.041436] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00)
[14315327.041436] powernow-k8:    0 : fid 0x16 (3000 MHz), vid 0x6
[14315327.041436] powernow-k8:    1 : fid 0x14 (2800 MHz), vid 0x8
[14315327.041436] powernow-k8:    2 : fid 0x12 (2600 MHz), vid 0xa
[14315327.041436] powernow-k8:    3 : fid 0x10 (2400 MHz), vid 0xc
[14315327.041436] powernow-k8:    4 : fid 0xe (2200 MHz), vid 0xe
[14315327.041436] powernow-k8:    5 : fid 0xc (2000 MHz), vid 0x10
[14315327.041436] powernow-k8:    6 : fid 0xa (1800 MHz), vid 0x10
[14315327.041436] powernow-k8:    7 : fid 0x2 (1000 MHz), vid 0x12
[14315327.061436] input: AT Translated Set 2 keyboard as /class/input/input2
[14315327.158140] reiser4: sda3: found disk format 4.0.0.
[14315328.731442] Clocksource tsc unstable (delta = -108742736 ns)
[14315332.661436] VFS: Mounted root (reiser4 filesystem) readonly.
[14315332.661436] Freeing unused kernel memory: 204k freed
[14315335.108134] Mem-info:
[14315335.108137] DMA per-cpu:
[14315335.108138] CPU    0: hi:    0, btch:   1 usd:   0
[14315335.108140] CPU    1: hi:    0, btch:   1 usd:   0
[14315335.108141] DMA32 per-cpu:
[14315335.108143] CPU    0: hi:  186, btch:  31 usd: 110
[14315335.108144] CPU    1: hi:  186, btch:  31 usd:   0
[14315335.108145] Normal per-cpu:
[14315335.108147] CPU    0: hi:  186, btch:  31 usd:  82
[14315335.108148] CPU    1: hi:  186, btch:  31 usd:  86
[14315335.108151] Active:2710 inactive:2495 dirty:0 writeback:0 unstable:0
[14315335.108152]  free:1002309 slab:1475 mapped:352 pagetables:443 bounce:0
[14315335.108154] DMA free:12420kB min:20kB low:24kB high:28kB active:0kB inactive:0kB present:11644kB pages_scanned:0 all_unreclaimable? no
[14315335.108156] lowmem_reserve[]: 0 3255 4013 4013
[14315335.108160] DMA32 free:3249152kB min:6568kB low:8208kB high:9852kB active:0kB inactive:0kB present:3334048kB pages_scanned:0 all_unreclaimable? no
[14315335.108162] lowmem_reserve[]: 0 0 757 757
[14315335.108165] Normal free:747664kB min:1528kB low:1908kB high:2292kB active:10840kB inactive:9980kB present:775680kB pages_scanned:0 all_unreclaimable? no
[14315335.108167] lowmem_reserve[]: 0 0 0 0
[14315335.108169] DMA: 3*4kB 3*8kB 2*16kB 2*32kB 4*64kB 2*128kB 2*256kB 0*512kB 1*1024kB 1*2048kB 2*4096kB = 12420kB
[14315335.108175] DMA32: 0*4kB 0*8kB 0*16kB 0*32kB 0*64kB 0*128kB 2*256kB 3*512kB 1*1024kB 1*2048kB 792*4096kB = 3249152kB
[14315335.108180] Normal: 1*4kB 4*8kB 3*16kB 3*32kB 1*64kB 1*128kB 1*256kB 3*512kB 2*1024kB 1*2048kB 181*4096kB = 747636kB
[14315335.108186] 3403 total pagecache pages
[14315335.108187] Swap cache: add 0, delete 0, find 0/0
[14315335.108188] Free swap  = 0kB
[14315335.108189] Total swap = 0kB
[14315335.111437] 1245184 pages of RAM
[14315335.111437] 233073 reserved pages
[14315335.111437] 6494 pages shared
[14315335.111437] 0 pages swap cached
[14315335.478135] r8169 Gigabit Ethernet driver 2.2LK loaded
[14315335.478388] ACPI: PCI Interrupt Link [LNEB] enabled at IRQ 19
[14315335.478393] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNEB] -> GSI 19 (level, low) -> IRQ 19
[14315335.478401] PCI: Setting latency timer of device 0000:01:00.0 to 64
[14315335.478475] eth0: RTL8168b/8111b at 0xffffc2000005c000, 00:19:66:47:f3:cb, XID 38000000 IRQ 314
[14315335.518375] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[14315335.518375] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUB2] -> GSI 22 (level, low) -> IRQ 22
[14315335.518375] PCI: Setting latency timer of device 0000:00:02.1 to 64
[14315335.518375] ehci_hcd 0000:00:02.1: EHCI Host Controller
[14315335.518375] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[14315335.518375] ehci_hcd 0000:00:02.1: debug port 1
[14315335.518375] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[14315335.518375] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9dfec00
[14315335.528202] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[14315335.528285] usb usb1: configuration #1 chosen from 1 choice
[14315335.528307] hub 1-0:1.0: USB hub found
[14315335.528313] hub 1-0:1.0: 10 ports detected
[14315335.861439] usb 1-4: new high speed USB device using ehci_hcd and address 2
[14315335.964771] reiser4: sdb2: found disk format 4.0.0.
[14315335.988104] usb 1-4: configuration #1 chosen from 1 choice
[14315335.988304] hub 1-4:1.0: USB hub found
[14315335.988392] hub 1-4:1.0: 4 ports detected
[14315336.278195] usb 1-4.1: new low speed USB device using ehci_hcd and address 3
[14315336.367560] usb 1-4.1: configuration #1 chosen from 1 choice
[14315336.381887] input: Logitech USB Receiver as /class/input/input3
[14315336.404799] input: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:02.1-4.1
[14315336.414999] input: Logitech USB Receiver as /class/input/input4
[14315336.458131] input: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:02.1-4.1
[14315336.479020] mice: PS/2 mouse device common for all mice
[14315336.647391] usb 1-4.2: new high speed USB device using ehci_hcd and address 4
[14315336.731414] usb 1-4.2: configuration #1 chosen from 1 choice
[14315336.768104] Initializing USB Mass Storage driver...
[14315336.770594] scsi4 : SCSI emulation for USB Mass Storage devices
[14315336.771438] usb-storage: device found at 4
[14315336.771438] usb-storage: waiting for device to settle before scanning
[14315336.771440] usbcore: registered new interface driver usb-storage
[14315336.771440] USB Mass Storage support registered.
[14315341.768103] scsi 4:0:0:0: Direct-Access     Generic  IC1210        CF 1.9C PQ: 0 ANSI: 0 CCS
[14315341.774771] sd 4:0:0:0: [sdc] Attached SCSI removable disk
[14315341.774771] sd 4:0:0:0: Attached scsi generic sg2 type 0
[14315341.778105] scsi 4:0:0:1: Direct-Access     Generic  IC1210        MS 1.9C PQ: 0 ANSI: 0 CCS
[14315341.788927] sd 4:0:0:1: [sdd] Attached SCSI removable disk
[14315341.791436] sd 4:0:0:1: Attached scsi generic sg3 type 0
[14315341.968103] scsi 4:0:0:2: Direct-Access     Generic  IC1210    MMC/SD 1.9C PQ: 0 ANSI: 0 CCS
[14315341.986615] sd 4:0:0:2: [sde] 122624 512-byte hardware sectors (63 MB)
[14315341.988689] sd 4:0:0:2: [sde] Write Protect is off
[14315341.988692] sd 4:0:0:2: [sde] Mode Sense: 4b 00 00 08
[14315341.988693] sd 4:0:0:2: [sde] Assuming drive cache: write through
[14315341.998729] sd 4:0:0:2: [sde] 122624 512-byte hardware sectors (63 MB)
[14315342.001911] sd 4:0:0:2: [sde] Write Protect is off
[14315342.001913] sd 4:0:0:2: [sde] Mode Sense: 4b 00 00 08
[14315342.001914] sd 4:0:0:2: [sde] Assuming drive cache: write through
[14315342.001916]  sde: sde1
[14315342.005017] sd 4:0:0:2: [sde] Attached SCSI removable disk
[14315342.005044] sd 4:0:0:2: Attached scsi generic sg4 type 0
[14315342.011484] scsi 4:0:0:3: Direct-Access     Generic  IC1210        SM 1.9C PQ: 0 ANSI: 0 CCS
[14315342.024769] sd 4:0:0:3: [sdf] Attached SCSI removable disk
[14315342.024769] sd 4:0:0:3: Attached scsi generic sg5 type 0
[14315342.024769] usb-storage: device scan complete
[14315361.064828] reiser4: sda5: found disk format 4.0.0.
[14315363.724769] reiser4: sdb1: found disk format 4.0.0.
[14315364.821826] Adding 4000176k swap on /dev/sda2.  Priority:-1 extents:1 across:4000176k
[14315365.571434] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[14315365.571434] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18
[14315365.572531] Audigy2 value: Special config.
[14315365.598378] r8169: eth0: link up
[14315365.598378] r8169: eth0: link up
[14315366.613262] i2c /dev entries driver
[14315366.688376] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x2d00
[14315366.688376] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x2e00
[14315367.078375] w83627ehf: Found W83627EHG chip at 0x290

[-- Attachment #3: dmesg_2.6.26_rc4_reiser_ahci_nomsi --]
[-- Type: application/octet-stream, Size: 32004 bytes --]

[-- Attachment #4: lspci_ahci_nomsi_2.6.26-rc4_vxxx --]
[-- Type: text/plain, Size: 26366 bytes --]

00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
	Subsystem: ASRock Incorporation Device 0444
	Flags: bus master, 66MHz, fast devsel, latency 0
	Capabilities: [44] HyperTransport: Slave or Primary Interface
	Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
00: de 10 44 04 06 00 b0 00 a1 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 44 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 44 04 08 dc e0 01 22 00 11 11 d0 00 00 00
50: 23 05 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 00 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 12 88 88 00 fa 00 64 0d 03 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 80 00 0f 0f 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2)
	Subsystem: ASRock Incorporation Device 0441
	Flags: bus master, 66MHz, fast devsel, latency 0
00: de 10 41 04 0f 00 a0 20 a2 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 41 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 49 18 41 04 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 05 33 00 2c 01
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 ff ff c5 80 00 00 00 00 04 19 60 00 c0 00
80: 09 20 00 10 00 00 00 00 f0 00 00 01 ff 00 00 00
90: ff 7f 00 00 00 00 00 00 21 97 0a 68 ed bc 00 00
a0: 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 90 02 0f 03 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 04 c0 df f9 00 01 00 70
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
	Subsystem: ASRock Incorporation Device 0446
	Flags: 66MHz, fast devsel, IRQ 11
	I/O ports at bc00 [size=64]
	I/O ports at 2d00 [size=64]
	I/O ports at 2e00 [size=64]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: nForce2_smbus
	Kernel modules: i2c-nforce2
00: de 10 46 04 01 00 b0 00 a1 00 05 0c 00 00 80 00
10: 01 bc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 2d 00 00 01 2e 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 00 00
40: 49 18 46 04 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 20 00 00 01 24 00 00 01 28 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 01 2c 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
d0: 40 00 40 01 10 00 00 00 05 00 00 00 00 00 00 00
e0: 80 10 04 00 04 40 00 07 80 1e 02 00 41 44 44 11
f0: 02 ff 1e bf 01 00 00 80 10 00 00 00 00 00 00 00

00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
	Subsystem: ASRock Incorporation Device 0446
	Flags: 66MHz, fast devsel
00: de 10 45 04 00 04 a0 00 a1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 45 04 00 00 00 00 10 02 80 10 10 00 10 10
50: 10 10 10 10 00 00 00 00 00 00 00 00 10 42 00 00
60: 69 0c 21 06 43 98 31 0c c7 0c 63 0c 62 00 00 04
70: 20 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 01 00 00 04 42 00 01 00
90: 00 00 01 18 06 00 00 00 00 00 70 00 20 01 00 00
a0: 00 00 00 00 00 00 00 00 40 0c 50 06 40 18 20 0c
b0: 00 98 11 00 00 04 00 00 00 00 00 02 00 04 10 00
c0: 01 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) (prog-if 10 [OHCI])
	Subsystem: ASRock Incorporation Device 0454
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
	Memory at f9dff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
	Kernel modules: ohci-hcd
00: de 10 54 04 07 00 b0 00 a1 10 03 0c 00 00 80 00
10: 00 f0 df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 54 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 49 18 54 04 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) (prog-if 20 [EHCI])
	Subsystem: ASRock Incorporation Device 0455
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
	Memory at f9dfec00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=0098
	Capabilities: [80] Power Management version 2
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd
00: de 10 55 04 06 00 b0 00 a1 20 03 0c 00 00 80 00
10: 00 ec df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 55 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 07 02 03 01
40: 49 18 55 04 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 34 00
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
b0: 00 11 22 33 44 00 00 00 ff 03 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) (prog-if 01 [Subtractive decode])
	Flags: bus master, 66MHz, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: f9f00000-f9ffffff
	Prefetchable memory behind bridge: f0000000-f00fffff
	Capabilities: [b8] Subsystem: ASRock Incorporation Device 0449
	Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
00: de 10 49 04 07 00 b0 00 a1 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 80 22
20: f0 f9 f0 f9 00 f0 00 f0 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 00 00 02 02
40: 00 00 73 07 01 00 02 00 07 00 00 00 00 00 48 00
50: 00 00 00 00 00 00 00 00 f7 1f ff 1f 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 0a 00 00 3c 00 00 01 00 00 00 00 08 00 01 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 49 18 49 04
c0: 49 18 49 04 07 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: ASRock Incorporation Device 0448
	Flags: bus master, 66MHz, fast devsel, latency 0
	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	I/O ports at ffa0 [size=16]
	Capabilities: [44] Power Management version 2
00: de 10 48 04 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 49 18 48 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 49 18 48 04 01 00 02 00 00 00 00 00 00 00 00 00
50: 02 f0 01 00 00 00 00 00 a8 a8 a8 a8 ff 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:0a.0 SATA controller: nVidia Corporation MCP65 AHCI Controller (rev a1) (prog-if 01 [AHCI 1.0])
	Subsystem: ASRock Incorporation Device 044d
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
	I/O ports at 0e00 [size=8]
	I/O ports at 0e20 [size=4]
	I/O ports at 0e40 [size=8]
	I/O ports at 0e60 [size=4]
	I/O ports at a800 [size=16]
	Memory at f9dfc000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [44] Power Management version 2
	Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
	Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: ahci
00: de 10 4d 04 07 00 b0 00 a1 01 06 01 00 00 80 00
10: 01 0e 00 00 21 0e 00 00 41 0e 00 00 61 0e 00 00
20: 01 a8 00 00 00 c0 df f9 00 00 00 00 49 18 4d 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0f 01 03 01
40: 49 18 4d 04 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 38 60 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 01 00 60 ac 00 0f 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 00 00 00 00 07 a0 18 40 20 00 20 78
80: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 4d 04 06 01
a0: 6e 5a 00 3f 00 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 86 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 02 a8
d0: 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00
e0: 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 01 1f 00 00 00 00 00

00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: f9e00000-f9efffff
	Capabilities: [40] Subsystem: ASRock Incorporation Device 045b
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 5b 04 07 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 c1 c1 00 00
20: e0 f9 e0 f9 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5b 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 21 3c 11 03
90: 00 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Capabilities: [40] Subsystem: ASRock Incorporation Device 045a
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 5a 04 04 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5a 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 02
90: 00 00 21 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fa000000-febfffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Capabilities: [40] Subsystem: ASRock Incorporation Device 0458
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 58 04 07 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 e1 e1 00 00
20: 00 fa b0 fe 01 d0 f1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 1a 00
40: 0d 48 00 00 49 18 58 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 01 3d 11 00
90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Capabilities: [40] Subsystem: ASRock Incorporation Device 0459
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 59 04 04 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 59 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 01
90: 00 00 81 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Flags: fast devsel
	Capabilities: [80] HyperTransport: Host or Secondary Interface
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 01 00 e4 00 00 00 20 c8 2e 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 05 75 80 02 00 00 00
90: 69 01 61 01 00 00 07 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Flags: fast devsel
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 2f 01 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 03 00 e0 00 80 ff ef 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 03 0a 00 00 00 0b 00 00 03 00 d0 00 00 0b fe 00
c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00
d0: 03 20 00 00 00 20 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00
f0: 01 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Flags: fast devsel
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 22 00 00 00 00 00 00 00 13 91 15 0c 20 12 92 00
90: 10 08 01 00 69 80 10 34 39 00 00 80 00 00 00 00
a0: eb 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00
b0: e3 5e ab 99 42 00 00 00 88 63 88 15 18 83 09 11
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 7f 1e b4 c6 ec fb ce bf 3a ab 34 fd 4b e5 61 e0
e0: 7e 3f dd 27 cf dc c2 89 3e 1f 53 66 6d 07 0b 72
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Flags: fast devsel
	Capabilities: [f0] Secure device <?>
	Kernel driver in use: k8temp
	Kernel modules: k8temp
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 c0 d7 0d b0
60: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 22 30 00 50 00 1b 00 08 2e 22 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 03 00 00 00 02 00 00 00 00 e5 2f 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 40 4a 04
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 40 00 25 20 20 00
e0: 00 00 00 00 24 16 46 00 19 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 33 0f 04 00

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
	Subsystem: ASRock Incorporation Device 8168
	Flags: bus master, fast devsel, latency 0, IRQ 19
	I/O ports at c800 [size=256]
	Memory at f9eff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at f9ec0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
	Capabilities: [48] Vital Product Data <?>
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] Express Endpoint, MSI 00
	Capabilities: [84] Vendor Specific Information <?>
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [12c] Virtual Channel <?>
	Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-00-00
	Capabilities: [154] Power Budgeting <?>
	Kernel driver in use: r8169
	Kernel modules: r8169
00: ec 10 68 81 07 01 10 40 01 00 00 02 10 00 00 00
10: 01 c8 00 00 00 00 00 00 04 f0 ef f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 68 81
30: 00 00 ec f9 40 00 00 00 00 00 00 00 0a 01 00 00
40: 01 48 c2 f7 00 00 00 00 03 50 00 00 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 84 01 00 63 7e 00 00 10 58 1a 00 11 f4 03 00
70: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11
90: 08 30 00 00 75 42 0f 00 ad 40 0c 00 47 07 00 00
a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00
b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:08.0 SCSI storage controller: Adaptec AHA-2944UW / AIC-7884U (rev 01)
	Subsystem: Adaptec Device 7884
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at d800 [size=256]
	Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at f0000000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
	Kernel modules: aic7xxx
00: 04 90 78 84 17 01 90 02 01 00 00 01 10 20 00 00
10: 01 d8 00 00 00 f0 ff f9 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 90 84 78
30: 00 00 fe f9 dc 00 00 00 00 00 00 00 0b 01 08 08
40: 80 15 00 00 80 15 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 21 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
	Subsystem: Creative Labs Device 1001
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at dc00 [size=64]
	Capabilities: [dc] Power Management version 2
	Kernel driver in use: EMU10K1_Audigy
	Kernel modules: snd-emu10k1
00: 02 11 08 00 05 01 90 02 00 00 01 04 00 20 00 00
10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 01 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 02 14
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 82 00 00
50: 00 80 00 00 ff ff 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

04:00.0 VGA compatible controller: nVidia Corporation Device 0402 (rev a1) (prog-if 00 [VGA controller])
	Subsystem: nVidia Corporation Device 0439
	Flags: bus master, fast devsel, latency 0, IRQ 10
	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
	I/O ports at ec00 [size=128]
	Expansion ROM at febe0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
	Capabilities: [78] Express Endpoint, MSI 00
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [128] Power Budgeting <?>
	Capabilities: [600] Vendor Specific Information <?>
	Kernel modules: nvidia
00: de 10 02 04 07 01 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 fd 0c 00 00 d0 00 00 00 00 04 00 00 fa
20: 00 00 00 00 01 ec 00 00 00 00 00 00 de 10 39 04
30: 00 00 be fe 60 00 00 00 00 00 00 00 0a 01 00 00
40: de 10 39 04 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 e0 84 00 00
80: 10 28 00 00 01 3d 01 00 08 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


[-- Attachment #5: lspci_non_raid_msi_2.6.24-rc4_vxxx --]
[-- Type: text/plain, Size: 26404 bytes --]

00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
	Subsystem: ASRock Incorporation Device 0444
	Flags: bus master, 66MHz, fast devsel, latency 0
	Capabilities: [44] HyperTransport: Slave or Primary Interface
	Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
00: de 10 44 04 06 00 b0 00 a1 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 44 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 44 04 08 dc e0 01 22 00 11 11 d0 00 00 00
50: 23 05 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 00 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 12 88 88 00 fa 00 64 0d 03 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 80 00 0f 0f 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2)
	Subsystem: ASRock Incorporation Device 0441
	Flags: bus master, 66MHz, fast devsel, latency 0
	I/O ports at 2f00 [size=256]
00: de 10 41 04 0f 00 a0 20 a2 00 01 06 00 00 80 00
10: 01 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 41 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 49 18 41 04 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 05 33 00 2c 01
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 ff ff c5 80 00 00 00 00 04 19 60 00 c0 00
80: 09 20 00 10 00 00 00 00 f0 00 00 01 ff 00 00 00
90: ff 7f 00 00 00 00 00 00 21 97 0a 68 ed bc 00 00
a0: 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 90 02 0f 03 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
	Subsystem: ASRock Incorporation Device 0446
	Flags: 66MHz, fast devsel, IRQ 11
	I/O ports at bc00 [size=64]
	I/O ports at 2d00 [size=64]
	I/O ports at 2e00 [size=64]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: nForce2_smbus
	Kernel modules: i2c-nforce2
00: de 10 46 04 01 00 b0 00 a1 00 05 0c 00 00 80 00
10: 01 bc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 2d 00 00 01 2e 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 00 00
40: 49 18 46 04 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 20 00 00 01 24 00 00 01 28 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 01 2c 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
d0: 40 00 40 01 10 00 00 00 05 00 00 00 00 00 00 00
e0: 80 10 04 00 04 40 00 07 80 1e 02 00 41 44 44 11
f0: 02 ff 1e bf 01 00 00 80 10 00 00 00 00 00 00 00

00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
	Subsystem: ASRock Incorporation Device 0446
	Flags: 66MHz, fast devsel
00: de 10 45 04 00 04 a0 00 a1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 45 04 00 00 00 00 10 02 80 10 10 00 10 10
50: 10 10 10 10 00 00 00 00 00 00 00 00 10 42 00 00
60: 69 0c 21 06 43 98 31 0c c7 0c 63 0c 62 00 00 04
70: 20 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 01 00 00 04 42 00 01 00
90: 00 00 01 18 06 00 00 00 00 00 70 00 20 01 00 00
a0: 00 00 00 00 00 00 00 00 40 0c 50 06 40 18 20 0c
b0: 00 98 11 00 00 04 00 00 00 00 00 02 00 04 10 00
c0: 01 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) (prog-if 10 [OHCI])
	Subsystem: ASRock Incorporation Device 0454
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
	Memory at f9dff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
	Kernel modules: ohci-hcd
00: de 10 54 04 07 00 b0 00 a1 10 03 0c 00 00 80 00
10: 00 f0 df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 54 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 49 18 54 04 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) (prog-if 20 [EHCI])
	Subsystem: ASRock Incorporation Device 0455
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
	Memory at f9dfec00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=0098
	Capabilities: [80] Power Management version 2
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd
00: de 10 55 04 06 00 b0 00 a1 20 03 0c 00 00 80 00
10: 00 ec df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 55 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 07 02 03 01
40: 49 18 55 04 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 c4 00
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
b0: 00 11 22 33 44 00 00 00 ff 03 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) (prog-if 01 [Subtractive decode])
	Flags: bus master, 66MHz, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: f9f00000-f9ffffff
	Prefetchable memory behind bridge: f0000000-f00fffff
	Capabilities: [b8] Subsystem: ASRock Incorporation Device 0449
	Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
00: de 10 49 04 07 00 b0 00 a1 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 80 22
20: f0 f9 f0 f9 00 f0 00 f0 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 00 00 02 02
40: 00 00 73 07 01 00 02 00 07 00 00 00 00 00 48 00
50: 00 00 00 00 00 00 00 00 f7 1f ff 1f 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 0a 00 00 3c 00 00 01 00 00 00 00 08 00 01 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 49 18 49 04
c0: 49 18 49 04 07 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: ASRock Incorporation Device 0448
	Flags: bus master, 66MHz, fast devsel, latency 0
	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	I/O ports at ffa0 [size=16]
	Capabilities: [44] Power Management version 2
00: de 10 48 04 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 49 18 48 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 49 18 48 04 01 00 02 00 00 00 00 00 00 00 00 00
50: 02 f0 01 00 00 00 00 00 a8 a8 a8 a8 ff 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
	Subsystem: ASRock Incorporation Device 045d
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 315
	I/O ports at 0e00 [size=8]
	I/O ports at 0e20 [size=4]
	I/O ports at 0e40 [size=8]
	I/O ports at 0e60 [size=4]
	I/O ports at a800 [size=16]
	Memory at f9dfc000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [44] Power Management version 2
	Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable+
	Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
	Kernel driver in use: ahci
00: de 10 5d 04 07 04 b0 00 a1 85 01 01 00 00 80 00
10: 01 0e 00 00 21 0e 00 00 41 0e 00 00 61 0e 00 00
20: 01 a8 00 00 00 c0 df f9 00 00 00 00 49 18 5d 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0f 01 03 01
40: 49 18 5d 04 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 38 60 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 60 ac 00 0f 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 00 00 00 00 07 a0 18 40 20 00 20 78
80: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 5d 04 01 01
a0: 6e 5a 00 3f 00 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 87 00 0c 30 e0 fe 00 00 00 00 71 41 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 03 a8
d0: 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00
e0: 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 01 1e 00 00 00 00 00

00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: f9e00000-f9efffff
	Capabilities: [40] Subsystem: ASRock Incorporation Device 045b
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 5b 04 07 04 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 c1 c1 00 00
20: e0 f9 e0 f9 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5b 04 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 49 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 21 3c 11 03
90: 00 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Capabilities: [40] Subsystem: ASRock Incorporation Device 045a
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 5a 04 04 04 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5a 04 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 51 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 02
90: 00 00 21 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fa000000-febfffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Capabilities: [40] Subsystem: ASRock Incorporation Device 0458
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 58 04 07 04 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 e1 e1 00 00
20: 00 fa b0 fe 01 d0 f1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 1a 00
40: 0d 48 00 00 49 18 58 04 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 59 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 01 3d 11 00
90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Capabilities: [40] Subsystem: ASRock Incorporation Device 0459
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 59 04 04 04 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 59 04 01 50 02 f8 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 61 41 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 01
90: 00 00 81 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Flags: fast devsel
	Capabilities: [80] HyperTransport: Host or Secondary Interface
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 01 00 e4 00 00 00 20 c8 2e 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 05 75 80 02 00 00 00
90: 69 01 61 01 00 00 07 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Flags: fast devsel
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 2f 01 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 03 00 e0 00 80 ff ef 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 03 0a 00 00 00 0b 00 00 03 00 d0 00 00 0b fe 00
c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00
d0: 03 20 00 00 00 20 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00
f0: 01 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Flags: fast devsel
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 22 00 00 00 00 00 00 00 13 91 15 0c 20 12 92 00
90: 10 08 01 00 69 80 10 34 39 00 00 80 00 00 00 00
a0: eb 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00
b0: 9a 5b bb 39 35 00 00 00 88 63 88 15 18 83 09 11
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 7f 1e b4 c6 ec fb ce bf 3a ab 34 fd 4b e5 61 e0
e0: 7e 3f dd 27 cf dc c2 89 3e 1f 53 66 6d 07 0b 72
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Flags: fast devsel
	Capabilities: [f0] Secure device <?>
	Kernel driver in use: k8temp
	Kernel modules: k8temp
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 c0 d7 0d b0
60: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 22 30 00 50 00 1b 00 08 2e 22 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 03 00 00 00 02 00 00 00 00 e5 2f 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 b0 3d 04
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 40 00 25 20 20 00
e0: 00 00 00 00 24 16 46 00 19 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 33 0f 04 00

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
	Subsystem: ASRock Incorporation Device 8168
	Flags: bus master, fast devsel, latency 0, IRQ 314
	I/O ports at c800 [size=256]
	Memory at f9eff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at f9ec0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
	Capabilities: [48] Vital Product Data <?>
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
	Capabilities: [60] Express Endpoint, MSI 00
	Capabilities: [84] Vendor Specific Information <?>
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [12c] Virtual Channel <?>
	Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-00-00
	Capabilities: [154] Power Budgeting <?>
	Kernel driver in use: r8169
	Kernel modules: r8169
00: ec 10 68 81 07 05 10 40 01 00 00 02 10 00 00 00
10: 01 c8 00 00 00 00 00 00 04 f0 ef f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 68 81
30: 00 00 ec f9 40 00 00 00 00 00 00 00 0a 01 00 00
40: 01 48 c2 f7 00 00 00 00 03 50 00 00 00 00 00 00
50: 05 60 83 00 0c 30 e0 fe 00 00 00 00 81 41 00 00
60: 10 84 01 00 63 7e 00 00 10 58 1a 00 11 f4 03 00
70: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11
90: 08 30 00 00 d5 41 05 00 b4 00 04 00 aa 04 00 00
a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00
b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:08.0 SCSI storage controller: Adaptec AHA-2944UW / AIC-7884U (rev 01)
	Subsystem: Adaptec Device 7884
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at d800 [size=256]
	Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at f0000000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
	Kernel modules: aic7xxx
00: 04 90 78 84 17 01 90 02 01 00 00 01 10 20 00 00
10: 01 d8 00 00 00 f0 ff f9 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 90 84 78
30: 00 00 fe f9 dc 00 00 00 00 00 00 00 0b 01 08 08
40: 80 15 00 00 80 15 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 21 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
	Subsystem: Creative Labs Device 1001
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at dc00 [size=64]
	Capabilities: [dc] Power Management version 2
	Kernel driver in use: EMU10K1_Audigy
	Kernel modules: snd-emu10k1
00: 02 11 08 00 05 01 90 02 00 00 01 04 00 20 00 00
10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 01 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 02 14
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 82 00 00
50: 00 80 00 00 ff ff 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

04:00.0 VGA compatible controller: nVidia Corporation Device 0402 (rev a1) (prog-if 00 [VGA controller])
	Subsystem: nVidia Corporation Device 0439
	Flags: bus master, fast devsel, latency 0, IRQ 10
	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
	I/O ports at ec00 [size=128]
	Expansion ROM at febe0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
	Capabilities: [78] Express Endpoint, MSI 00
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [128] Power Budgeting <?>
	Capabilities: [600] Vendor Specific Information <?>
	Kernel modules: nvidia
00: de 10 02 04 07 01 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 fd 0c 00 00 d0 00 00 00 00 04 00 00 fa
20: 00 00 00 00 01 ec 00 00 00 00 00 00 de 10 39 04
30: 00 00 be fe 60 00 00 00 00 00 00 00 0a 01 00 00
40: de 10 39 04 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 e0 84 00 00
80: 10 28 00 00 01 3d 01 00 08 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


[-- Attachment #6: lspci_non_raid_nomsi_2.6.24-rc4_vxxx --]
[-- Type: text/plain, Size: 26402 bytes --]

00:00.0 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
	Subsystem: ASRock Incorporation Device 0444
	Flags: bus master, 66MHz, fast devsel, latency 0
	Capabilities: [44] HyperTransport: Slave or Primary Interface
	Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
00: de 10 44 04 06 00 b0 00 a1 00 00 05 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 44 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 44 04 08 dc e0 01 22 00 11 11 d0 00 00 00
50: 23 05 7f 00 03 00 00 00 00 00 03 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 06 15 00 00
70: 44 44 44 00 d0 09 00 00 11 00 00 00 11 11 88 00
80: 12 88 88 00 fa 00 64 0d 03 00 00 00 7f 00 00 00
90: 70 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 01 01 01 01 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 80 00 0f 0f 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 01 a8
e0: 00 00 e0 fe 00 00 00 00 00 00 80 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:01.0 ISA bridge: nVidia Corporation MCP65 LPC Bridge (rev a2)
	Subsystem: ASRock Incorporation Device 0441
	Flags: bus master, 66MHz, fast devsel, latency 0
	I/O ports at 2f00 [size=256]
00: de 10 41 04 0f 00 a0 20 a2 00 01 06 00 00 80 00
10: 01 2f 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 41 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 ff 00 00 00
40: 49 18 41 04 00 00 d0 fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 00 5a 62 02 00 00 00 05 33 00 2c 01
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 10 00 ff ff c5 80 00 00 00 00 04 19 60 00 c0 00
80: 09 20 00 10 00 00 00 00 f0 00 00 01 ff 00 00 00
90: ff 7f 00 00 00 00 00 00 21 97 0a 68 ed bc 00 00
a0: 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 90 02 0f 03 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 02 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:01.1 SMBus: nVidia Corporation MCP65 SMBus (rev a1)
	Subsystem: ASRock Incorporation Device 0446
	Flags: 66MHz, fast devsel, IRQ 11
	I/O ports at bc00 [size=64]
	I/O ports at 2d00 [size=64]
	I/O ports at 2e00 [size=64]
	Capabilities: [44] Power Management version 2
	Kernel driver in use: nForce2_smbus
	Kernel modules: i2c-nforce2
00: de 10 46 04 01 00 b0 00 a1 00 05 0c 00 00 80 00
10: 01 bc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 2d 00 00 01 2e 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 00 00
40: 49 18 46 04 01 00 02 c0 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 20 00 00 01 24 00 00 01 28 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 01 2c 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: d4 30 80 00 01 00 00 00 00 00 00 00 00 00 00 00
d0: 40 00 40 01 10 00 00 00 05 00 00 00 00 00 00 00
e0: 80 10 04 00 04 40 00 07 80 1e 02 00 41 44 44 11
f0: 02 ff 1e bf 01 00 00 80 10 00 00 00 00 00 00 00

00:01.2 RAM memory: nVidia Corporation MCP65 Memory Controller (rev a1)
	Subsystem: ASRock Incorporation Device 0446
	Flags: 66MHz, fast devsel
00: de 10 45 04 00 04 a0 00 a1 00 00 05 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 46 04
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 49 18 45 04 00 00 00 00 10 02 80 10 10 00 10 10
50: 10 10 10 10 00 00 00 00 00 00 00 00 10 42 00 00
60: 69 0c 21 06 43 98 31 0c c7 0c 63 0c 62 00 00 04
70: 20 00 20 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 01 00 00 04 42 00 01 00
90: 00 00 01 18 06 00 00 00 00 00 70 00 20 01 00 00
a0: 00 00 00 00 00 00 00 00 40 0c 50 06 40 18 20 0c
b0: 00 98 11 00 00 04 00 00 00 00 00 02 00 04 10 00
c0: 01 84 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.0 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) (prog-if 10 [OHCI])
	Subsystem: ASRock Incorporation Device 0454
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 5
	Memory at f9dff000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [44] Power Management version 2
	Kernel modules: ohci-hcd
00: de 10 54 04 07 00 b0 00 a1 10 03 0c 00 00 80 00
10: 00 f0 df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 54 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 05 01 03 01
40: 49 18 54 04 01 00 02 fe 00 00 00 00 00 00 00 00
50: 00 00 00 00 1d 47 40 00 10 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:02.1 USB Controller: nVidia Corporation MCP65 USB Controller (rev a1) (prog-if 20 [EHCI])
	Subsystem: ASRock Incorporation Device 0455
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
	Memory at f9dfec00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [44] Debug port: BAR=1 offset=0098
	Capabilities: [80] Power Management version 2
	Kernel driver in use: ehci_hcd
	Kernel modules: ehci-hcd
00: de 10 55 04 06 00 b0 00 a1 20 03 0c 00 00 80 00
10: 00 ec df f9 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 55 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 07 02 03 01
40: 49 18 55 04 0a 80 98 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 18 85 03 3c 3f 01 00 00 00 00
70: 00 00 08 05 00 10 20 80 89 3d b6 22 77 25 04 00
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 08 80 00 00 00 00 00 00 00 00
b0: 00 11 22 33 44 00 00 00 ff 03 00 00 00 00 00 00
c0: 10 10 2d 0d 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:08.0 PCI bridge: nVidia Corporation MCP65 PCI bridge (rev a1) (prog-if 01 [Subtractive decode])
	Flags: bus master, 66MHz, fast devsel, latency 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: f9f00000-f9ffffff
	Prefetchable memory behind bridge: f0000000-f00fffff
	Capabilities: [b8] Subsystem: ASRock Incorporation Device 0449
	Capabilities: [8c] HyperTransport: MSI Mapping Enable+ Fixed-
00: de 10 49 04 07 00 b0 00 a1 01 04 06 00 00 01 00
10: 00 00 00 00 00 00 00 00 00 02 02 20 d0 d0 80 22
20: f0 f9 f0 f9 00 f0 00 f0 00 00 00 00 00 00 00 00
30: 00 00 00 00 b8 00 00 00 00 00 00 00 00 00 02 02
40: 00 00 73 07 01 00 02 00 07 00 00 00 00 00 48 00
50: 00 00 00 00 00 00 00 00 f7 1f ff 1f 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 0a 00 00 3c 00 00 01 00 00 00 00 08 00 01 a8
90: 00 00 e0 fe 00 00 00 00 00 00 00 00 00 00 00 00
a0: 04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 ff ff 00 00 0d 8c 00 00 49 18 49 04
c0: 49 18 49 04 07 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:09.0 IDE interface: nVidia Corporation MCP65 IDE (rev a1) (prog-if 8a [Master SecP PriP])
	Subsystem: ASRock Incorporation Device 0448
	Flags: bus master, 66MHz, fast devsel, latency 0
	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
	[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
	[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
	I/O ports at ffa0 [size=16]
	Capabilities: [44] Power Management version 2
00: de 10 48 04 05 00 b0 00 a1 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: a1 ff 00 00 00 00 00 00 00 00 00 00 49 18 48 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 49 18 48 04 01 00 02 00 00 00 00 00 00 00 00 00
50: 02 f0 01 00 00 00 00 00 a8 a8 a8 a8 ff 00 ff ff
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 01
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00

00:0a.0 IDE interface: nVidia Corporation MCP65 SATA Controller (rev a1) (prog-if 85 [Master SecO PriO])
	Subsystem: ASRock Incorporation Device 045d
	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
	I/O ports at 0e00 [size=8]
	I/O ports at 0e20 [size=4]
	I/O ports at 0e40 [size=8]
	I/O ports at 0e60 [size=4]
	I/O ports at a800 [size=16]
	Memory at f9dfc000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: [44] Power Management version 2
	Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
	Capabilities: [cc] HyperTransport: MSI Mapping Enable+ Fixed+
	Kernel driver in use: ahci
00: de 10 5d 04 07 00 b0 00 a1 85 01 01 00 00 80 00
10: 01 0e 00 00 21 0e 00 00 41 0e 00 00 61 0e 00 00
20: 01 a8 00 00 00 c0 df f9 00 00 00 00 49 18 5d 04
30: 00 00 00 00 44 00 00 00 00 00 00 00 0f 01 03 01
40: 49 18 5d 04 01 b0 02 00 00 00 00 00 00 00 00 00
50: 0f 68 38 60 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 60 ac 00 0f 00 0f 06 42 00 00 00 00
70: 2c 78 c4 40 00 00 00 00 07 a0 18 40 20 00 20 78
80: 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 5d 04 01 01
a0: 6e 5a 00 3f 00 00 00 00 00 00 00 00 33 31 00 02
b0: 05 cc 86 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 08 00 03 a8
d0: 00 00 00 00 00 00 00 00 00 00 40 00 00 00 00 00
e0: 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 01 1e 00 00 00 00 00

00:0b.0 PCI bridge: nVidia Corporation Device 045b (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: f9e00000-f9efffff
	Capabilities: [40] Subsystem: ASRock Incorporation Device 045b
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 5b 04 07 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 01 01 00 c1 c1 00 00
20: e0 f9 e0 f9 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5b 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 21 3c 11 03
90: 00 00 11 30 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0c.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Capabilities: [40] Subsystem: ASRock Incorporation Device 045a
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 5a 04 04 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 03 03 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 5a 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 02
90: 00 00 21 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0d.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fa000000-febfffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Capabilities: [40] Subsystem: ASRock Incorporation Device 0458
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 58 04 07 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 04 04 00 e1 e1 00 00
20: 00 fa b0 fe 01 d0 f1 df 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 1a 00
40: 0d 48 00 00 49 18 58 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 01 3d 11 00
90: 00 00 01 31 00 00 00 00 c0 01 48 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:0e.0 PCI bridge: nVidia Corporation MCP65 PCI Express bridge (rev a1) (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Capabilities: [40] Subsystem: ASRock Incorporation Device 0459
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed-
	Capabilities: [80] Express Root Port (Slot+), MSI 00
	Capabilities: [100] Virtual Channel <?>
	Kernel driver in use: pcieport-driver
00: de 10 59 04 04 00 10 00 a1 00 04 06 10 00 01 00
10: 00 00 00 00 00 00 00 00 00 05 05 00 f1 01 00 00
20: f0 ff 00 00 f1 ff 01 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 40 00 00 00 00 00 00 00 00 00 02 00
40: 0d 48 00 00 49 18 59 04 01 50 02 f8 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 08 80 01 a8 00 00 e0 fe 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 10 00 41 01 01 80 00 00 1f 28 00 00 11 3c 11 01
90: 00 00 81 10 00 00 00 00 c0 01 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
	Flags: fast devsel
	Capabilities: [80] HyperTransport: Host or Secondary Interface
00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00
60: 00 00 01 00 e4 00 00 00 20 c8 2e 0f 0c 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 08 00 01 21 20 00 11 11 22 05 75 80 02 00 00 00
90: 69 01 61 01 00 00 07 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
	Flags: fast devsel
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 2f 01 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 03 00 e0 00 80 ff ef 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 03 0a 00 00 00 0b 00 00 03 00 d0 00 00 0b fe 00
c0: 13 10 00 00 00 f0 ff 00 00 00 00 00 00 00 00 00
d0: 03 20 00 00 00 20 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 07 00 00 00 00 00 00 00 00 00 00 00 00
f0: 01 30 00 d0 00 00 00 00 00 00 00 00 00 00 00 00

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
	Flags: fast devsel
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 01 00 00 01 02 00 00 01 03 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: e0 3c f8 00 e0 3c f8 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 46 00 00 00 00 00 00 00
80: 22 00 00 00 00 00 00 00 13 91 15 0c 20 12 92 00
90: 10 08 01 00 69 80 10 34 39 00 00 80 00 00 00 00
a0: eb 02 00 0c 00 00 00 00 00 00 00 00 00 00 00 00
b0: 50 dc 68 26 2b 00 00 00 88 63 88 15 18 83 09 11
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 7f 1e b4 c6 ec fb ce bf 3a ab 34 fd 4b e5 61 e0
e0: 7e 3f dd 27 cf dc c2 89 3e 1f 53 66 6d 07 0b 72
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
	Flags: fast devsel
	Capabilities: [f0] Secure device <?>
	Kernel driver in use: k8temp
	Kernel modules: k8temp
00: 22 10 03 11 00 00 10 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 f0 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 04 00 40 00 10 0a 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 c0 d7 0d b0
60: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 22 30 00 50 00 1b 00 08 2e 22 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 03 00 00 00 02 00 00 00 00 e5 2f 01 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 50 37 04
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 01 a7 0d 00 00 00 40 00 25 20 20 00
e0: 00 00 00 00 24 16 47 00 19 17 00 00 00 00 00 00
f0: 0f 00 10 00 00 00 00 00 00 00 00 00 33 0f 04 00

01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
	Subsystem: ASRock Incorporation Device 8168
	Flags: bus master, fast devsel, latency 0, IRQ 19
	I/O ports at c800 [size=256]
	Memory at f9eff000 (64-bit, non-prefetchable) [size=4K]
	Expansion ROM at f9ec0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 2
	Capabilities: [48] Vital Product Data <?>
	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
	Capabilities: [60] Express Endpoint, MSI 00
	Capabilities: [84] Vendor Specific Information <?>
	Capabilities: [100] Advanced Error Reporting <?>
	Capabilities: [12c] Virtual Channel <?>
	Capabilities: [148] Device Serial Number 68-81-ec-10-00-00-00-00
	Capabilities: [154] Power Budgeting <?>
	Kernel driver in use: r8169
	Kernel modules: r8169
00: ec 10 68 81 07 01 10 40 01 00 00 02 10 00 00 00
10: 01 c8 00 00 00 00 00 00 04 f0 ef f9 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 49 18 68 81
30: 00 00 ec f9 40 00 00 00 00 00 00 00 0a 01 00 00
40: 01 48 c2 f7 00 00 00 00 03 50 00 00 00 00 00 00
50: 05 60 82 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 10 84 01 00 63 7e 00 00 10 58 1a 00 11 f4 03 00
70: 00 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 09 00 4c 01 01 1c 02 00 fb ff ff 11
90: 08 30 00 00 75 41 0f 00 ad 70 0c 00 12 03 00 00
a0: 02 28 ff 01 00 00 00 00 00 08 00 00 03 00 03 00
b0: 00 00 00 00 ff 3f ff 3f ff ff 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:08.0 SCSI storage controller: Adaptec AHA-2944UW / AIC-7884U (rev 01)
	Subsystem: Adaptec Device 7884
	Flags: bus master, medium devsel, latency 32, IRQ 11
	I/O ports at d800 [size=256]
	Memory at f9fff000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at f0000000 [disabled] [size=64K]
	Capabilities: [dc] Power Management version 1
	Kernel modules: aic7xxx
00: 04 90 78 84 17 01 90 02 01 00 00 01 10 20 00 00
10: 01 d8 00 00 00 f0 ff f9 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 04 90 84 78
30: 00 00 fe f9 dc 00 00 00 00 00 00 00 0b 01 08 08
40: 80 15 00 00 80 15 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 21 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

02:09.0 Multimedia audio controller: Creative Labs SB0400 Audigy2 Value
	Subsystem: Creative Labs Device 1001
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at dc00 [size=64]
	Capabilities: [dc] Power Management version 2
	Kernel driver in use: EMU10K1_Audigy
	Kernel modules: snd-emu10k1
00: 02 11 08 00 05 01 90 02 00 00 01 04 00 20 00 00
10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 02 11 01 10
30: 00 00 00 00 dc 00 00 00 00 00 00 00 05 01 02 14
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 82 00 00
50: 00 80 00 00 ff ff 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 22 06
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

04:00.0 VGA compatible controller: nVidia Corporation Device 0402 (rev a1) (prog-if 00 [VGA controller])
	Subsystem: nVidia Corporation Device 0439
	Flags: bus master, fast devsel, latency 0, IRQ 10
	Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
	Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
	I/O ports at ec00 [size=128]
	Expansion ROM at febe0000 [disabled] [size=128K]
	Capabilities: [60] Power Management version 2
	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
	Capabilities: [78] Express Endpoint, MSI 00
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [128] Power Budgeting <?>
	Capabilities: [600] Vendor Specific Information <?>
	Kernel modules: nvidia
00: de 10 02 04 07 01 10 00 a1 00 00 03 10 00 00 00
10: 00 00 00 fd 0c 00 00 d0 00 00 00 00 04 00 00 fa
20: 00 00 00 00 01 ec 00 00 00 00 00 00 de 10 39 04
30: 00 00 be fe 60 00 00 00 00 00 00 00 0a 01 00 00
40: de 10 39 04 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 00 00 01 00 00 00 ce d6 23 00 00 00 00 00
60: 01 68 02 00 00 00 00 00 05 78 80 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 10 00 01 00 e0 84 00 00
80: 10 28 00 00 01 3d 01 00 08 00 01 11 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


[-- Attachment #7: .config --]
[-- Type: text/plain, Size: 40541 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-rc4
# Thu May 29 03:57:42 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_MEMTEST_BOOTPARAM=y
CONFIG_MEMTEST_BOOTPARAM_VALUE=0
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
CONFIG_MK8=y
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y

#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MTRR=y
CONFIG_X86_PAT=y
# CONFIG_EFI is not set
# CONFIG_SECCOMP is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
# CONFIG_X86_ACPI_CPUFREQ is not set
CONFIG_X86_POWERNOW_K8=y
CONFIG_X86_POWERNOW_K8_ACPI=y
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
# CONFIG_BT_HCIUSB is not set
# CONFIG_BT_HCIBTUSB is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=16
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
CONFIG_AIC7XXX_DEBUG_ENABLE=y
CONFIG_AIC7XXX_DEBUG_MASK=0
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_R8169_VLAN=y
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
# CONFIG_IWLWIFI_LEDS is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1680
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1050
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=m
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_PLATFORM is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
CONFIG_SENSORS_K8TEMP=m
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_MAX6650=m
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m

#
# Multimedia drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
CONFIG_MEDIA_TUNER_CUSTOMIZE=y
CONFIG_MEDIA_TUNER_SIMPLE=m
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA18271 is not set
CONFIG_MEDIA_TUNER_TDA9887=m
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2060 is not set
# CONFIG_MEDIA_TUNER_MT2266 is not set
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
# CONFIG_MEDIA_TUNER_MXL5005S is not set
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_DMA_SG=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEOBUF_DVB=m
CONFIG_VIDEO_IR_I2C=m
CONFIG_VIDEO_IR=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_TVP5150=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_TUNER_3036 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_DPC is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_VIDEO_PVRUSB2 is not set
CONFIG_VIDEO_EM28XX=m
CONFIG_VIDEO_EM28XX_ALSA=m
CONFIG_VIDEO_EM28XX_DVB=m
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_W9968CF is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y

#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set

#
# Supported USB Adapters
#
# CONFIG_DVB_USB is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_CINERGYT2 is not set

#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set

#
# Supported BT878 Adapters
#

#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set

#
# Supported DVB Frontends
#

#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set

#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set

#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
CONFIG_DVB_MT352=m
CONFIG_DVB_ZL10353=m
# CONFIG_DVB_DIB3000MB is not set
# CONFIG_DVB_DIB3000MC is not set
# CONFIG_DVB_DIB7000M is not set
# CONFIG_DVB_DIB7000P is not set
# CONFIG_DVB_TDA10048 is not set

#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set

#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
CONFIG_DVB_LGDT330X=m
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set

#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
# CONFIG_DVB_TUNER_DIB0070 is not set

#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
# CONFIG_SND_PCM_OSS_PLUGINS is not set
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# ALSA SoC audio for Freescale SOCs
#

#
# SoC Audio for the Texas Instruments OMAP
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not