LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [2.6.25-rc6] possible regression: X server dying
@ 2008-03-24 22:38 Tilman Schmidt
  2008-03-24 23:22 ` Dave Airlie
  0 siblings, 1 reply; 22+ messages in thread
From: Tilman Schmidt @ 2008-03-24 22:38 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3434 bytes --]

In the five days since I booted a 2.6.25-rc6 kernel on my development
machine, it has happened three times already that I came back to the
machine to find that the X server had exited, killing all applications
that still had a window open. This has never happened with previous
kernel versions (2.6.22.17, 2.6.24.3, 2.6.25-rc5), so I suspect some
relation to the latest rc kernel.

Syslog entries around the time of the crash (identical each time):

Mar 24 21:59:57 xenon kernel: [424469.161592] PM: Removing info for No
Bus:vcs7
Mar 24 21:59:57 xenon kernel: [424469.162591] PM: Removing info for No
Bus:vcsa7
Mar 24 21:59:57 xenon kernel: [424469.179556] uhci_hcd 0000:00:1d.1:
release dev 4 ep81-INT, period 8, phase 4, 93 us
Mar 24 21:59:57 xenon gconfd (ts-21705): Signal 15 erhalten,
ordungsgemäßes Herunterfahren
Mar 24 21:59:57 xenon gconfd (ts-21705): Beenden
Mar 24 21:59:57 xenon gdm[21341]: WARNING: gdm_slave_xioerror_handler:
Schwerwiegender X-Fehler - :0 wird neu gestartet
Mar 24 21:59:58 xenon kernel: [426716.212842] PM: Adding info for No
Bus:vcs7
Mar 24 21:59:58 xenon kernel: [426716.213300] PM: Adding info for No
Bus:vcsa7
Mar 24 21:59:58 xenon kernel: [426716.295997] PM: Removing info for No
Bus:vcs7
Mar 24 21:59:58 xenon kernel: [426716.296110] PM: Removing info for No
Bus:vcsa7
Mar 24 21:59:59 xenon kernel: [426716.434662] PM: Adding info for No
Bus:vcs7
Mar 24 21:59:59 xenon kernel: [426716.434742] PM: Adding info for No
Bus:vcsa7
Mar 24 22:00:00 xenon kernel: [426717.727427] uhci_hcd 0000:00:1d.1:
reserve dev 4 ep81-INT, period 8, phase 4, 93 us
Mar 24 22:00:00 xenon kernel: [424472.319521] uhci_hcd 0000:00:1d.1:
release dev 4 ep81-INT, period 8, phase 4, 93 us
Mar 24 22:00:00 xenon kernel: [426717.997926] uhci_hcd 0000:00:1d.1:
reserve dev 4 ep81-INT, period 8, phase 4, 93 us
Mar 24 22:00:02 xenon gconfd (root-15531): (Version 2.20.0) wird
gestartet, Prozesskennung 15531, Benutzer »root«
Mar 24 22:00:02 xenon gconfd (root-15531): Die Adresse
»xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu
einer nur lesbaren Konfigurationsquelle aufgelöst
Mar 24 22:00:02 xenon gconfd (root-15531): Die Adresse
»xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer
schreibbaren Konfigurationsquelle aufgelöst
Mar 24 22:00:02 xenon gconfd (root-15531): Die Adresse
»xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu
einer nur lesbaren Konfigurationsquelle aufgelöst
Mar 24 22:00:02 xenon gconfd (root-15531): Die Adresse
»xml:readonly:/etc/gconf/gconf.xml.schemas« wurde an der Position 3 zu
einer nur lesbaren Konfigurationsquelle aufgelöst
Mar 24 22:00:05 xenon kernel: [426722.904631] gtk-window-deco[15527]:
segfault at 4 ip b785c98a sp bfa4d160 error 4 in
libcairo.so.2.11.5[b7852000+7c000]

(The translation of the German error message from gdm is:
"Serious X error - restarting :0"
The German language messages from gconfd are probably not important,
as they appear identically during a regular X logout/login cycle.)

I'm at a loss where to start investigating this. Bisecting appears
impractical given the error happens about every other day with no
obvious triggering condition (except me being afk for a longer time.)

Configuration: Pentium D940, 2 GB RAM, Intel 965 chipset, Matrox
G550 PCIe graphics adapter, openSUSE 10.3 32 bit install.

Ideas?

Thanks
Tilman



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 254 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-03-24 22:38 [2.6.25-rc6] possible regression: X server dying Tilman Schmidt
@ 2008-03-24 23:22 ` Dave Airlie
  2008-03-24 23:45   ` Tilman Schmidt
  0 siblings, 1 reply; 22+ messages in thread
From: Dave Airlie @ 2008-03-24 23:22 UTC (permalink / raw)
  To: Tilman Schmidt; +Cc: linux-kernel

On Tue, Mar 25, 2008 at 8:38 AM, Tilman Schmidt <tilman@imap.cc> wrote:
> In the five days since I booted a 2.6.25-rc6 kernel on my development
>  machine, it has happened three times already that I came back to the
>  machine to find that the X server had exited, killing all applications
>  that still had a window open. This has never happened with previous
>  kernel versions (2.6.22.17, 2.6.24.3, 2.6.25-rc5), so I suspect some
>  relation to the latest rc kernel.
>
>  Syslog entries around the time of the crash (identical each time):
>
>  Mar 24 21:59:57 xenon kernel: [424469.161592] PM: Removing info for No
>  Bus:vcs7
>  Mar 24 21:59:57 xenon kernel: [424469.162591] PM: Removing info for No
>  Bus:vcsa7
>  Mar 24 21:59:57 xenon kernel: [424469.179556] uhci_hcd 0000:00:1d.1:
>  release dev 4 ep81-INT, period 8, phase 4, 93 us
>  Mar 24 21:59:57 xenon gconfd (ts-21705): Signal 15 erhalten,
>  ordungsgemäßes Herunterfahren
>  Mar 24 21:59:57 xenon gconfd (ts-21705): Beenden
>  Mar 24 21:59:57 xenon gdm[21341]: WARNING: gdm_slave_xioerror_handler:
>  Schwerwiegender X-Fehler - :0 wird neu gestartet
>  Mar 24 21:59:58 xenon kernel: [426716.212842] PM: Adding info for No
>  Bus:vcs7
>  Mar 24 21:59:58 xenon kernel: [426716.213300] PM: Adding info for No
>  Bus:vcsa7
>  Mar 24 21:59:58 xenon kernel: [426716.295997] PM: Removing info for No
>  Bus:vcs7
>  Mar 24 21:59:58 xenon kernel: [426716.296110] PM: Removing info for No
>  Bus:vcsa7
>  Mar 24 21:59:59 xenon kernel: [426716.434662] PM: Adding info for No
>  Bus:vcs7
>  Mar 24 21:59:59 xenon kernel: [426716.434742] PM: Adding info for No
>  Bus:vcsa7
>  Mar 24 22:00:00 xenon kernel: [426717.727427] uhci_hcd 0000:00:1d.1:
>  reserve dev 4 ep81-INT, period 8, phase 4, 93 us
>  Mar 24 22:00:00 xenon kernel: [424472.319521] uhci_hcd 0000:00:1d.1:
>  release dev 4 ep81-INT, period 8, phase 4, 93 us
>  Mar 24 22:00:00 xenon kernel: [426717.997926] uhci_hcd 0000:00:1d.1:
>  reserve dev 4 ep81-INT, period 8, phase 4, 93 us
>  Mar 24 22:00:02 xenon gconfd (root-15531): (Version 2.20.0) wird
>  gestartet, Prozesskennung 15531, Benutzer »root«
>  Mar 24 22:00:02 xenon gconfd (root-15531): Die Adresse
>  »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu
>  einer nur lesbaren Konfigurationsquelle aufgelöst
>  Mar 24 22:00:02 xenon gconfd (root-15531): Die Adresse
>  »xml:readwrite:/root/.gconf« wurde an der Position 1 zu einer
>  schreibbaren Konfigurationsquelle aufgelöst
>  Mar 24 22:00:02 xenon gconfd (root-15531): Die Adresse
>  »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu
>  einer nur lesbaren Konfigurationsquelle aufgelöst
>  Mar 24 22:00:02 xenon gconfd (root-15531): Die Adresse
>  »xml:readonly:/etc/gconf/gconf.xml.schemas« wurde an der Position 3 zu
>  einer nur lesbaren Konfigurationsquelle aufgelöst
>  Mar 24 22:00:05 xenon kernel: [426722.904631] gtk-window-deco[15527]:
>  segfault at 4 ip b785c98a sp bfa4d160 error 4 in
>  libcairo.so.2.11.5[b7852000+7c000]
>
>  (The translation of the German error message from gdm is:
>  "Serious X error - restarting :0"
>  The German language messages from gconfd are probably not important,
>  as they appear identically during a regular X logout/login cycle.)
>
>  I'm at a loss where to start investigating this. Bisecting appears
>  impractical given the error happens about every other day with no
>  obvious triggering condition (except me being afk for a longer time.)
>
>  Configuration: Pentium D940, 2 GB RAM, Intel 965 chipset, Matrox
>  G550 PCIe graphics adapter, openSUSE 10.3 32 bit install.
>
>  Ideas?

anything in the X.org logfiles? does it happen with DRI off?

I don't think any of the DRM changes I made could cause this, so I'd
be looking towards something more generic..

Dave.

>
>  Thanks
>  Tilman
>
>
>

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-03-24 23:22 ` Dave Airlie
@ 2008-03-24 23:45   ` Tilman Schmidt
  2008-03-25  0:53     ` Dave Airlie
  0 siblings, 1 reply; 22+ messages in thread
From: Tilman Schmidt @ 2008-03-24 23:45 UTC (permalink / raw)
  To: Dave Airlie; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2027 bytes --]

On Tue, 25 Mar 2008 09:22:32 +1000, Dave Airlie wrote:
> On Tue, Mar 25, 2008 at 8:38 AM, Tilman Schmidt <tilman@imap.cc> wrote:
>> In the five days since I booted a 2.6.25-rc6 kernel on my development
>>  machine, it has happened three times already that I came back to the
>>  machine to find that the X server had exited, killing all applications
>>  that still had a window open. [...]
> 
> anything in the X.org logfiles?

Ah, of course. Sorry I forgot. Xorg.0.log.old ends with this:

| Backtrace:
| 0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
| 1: [0xb7fc9400]
| 2:
/usr/lib/xorg/modules//extensions/libGLcore.so(_swrast_Triangle+0x2d)
[0xb51ea5dd]
| 3: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb51f1075]
| 4: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb5206f2e]
| 5: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb52080b8]
| 6:
/usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_run_pipeline+0x153)
[0xb520cb83]
| 7:
/usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_draw_prims+0x3f0)
[0xb51f8340]
| 8:
/usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_vtx_flush+0x1fb)
[0xb52471eb]
| 9:
/usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_FlushVertices+0x78)
[0xb52488e8]
| 10: /usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_Flush+0x83)
[0xb5112663]
| 11: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c6a107]
| 12: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c4aa6d]
| 13: /usr/bin/X [0x815809e]
| 14: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
| 15: /usr/bin/X(main+0x47e) [0x807717e]
| 16: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7d5dfe0]
| 17: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
|
| Fatal server error:
| Caught signal 11.  Server aborting

I have put the entire file at
http://gollum.phnxsoft.com/~ts/linux/Xorg.0.log.old
in case you want to have a look.

> does it happen with DRI off?

I guess it does, as my Xorg.0.log{,.old} says:

| (WW) MGA(0): Direct rendering disabled

HTH
Tilman


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 254 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-03-24 23:45   ` Tilman Schmidt
@ 2008-03-25  0:53     ` Dave Airlie
  2008-03-26 18:52       ` Pavel Machek
  2008-03-31  4:53       ` Dave Airlie
  0 siblings, 2 replies; 22+ messages in thread
From: Dave Airlie @ 2008-03-25  0:53 UTC (permalink / raw)
  To: Tilman Schmidt; +Cc: linux-kernel

On Tue, Mar 25, 2008 at 9:45 AM, Tilman Schmidt <tilman@imap.cc> wrote:
> On Tue, 25 Mar 2008 09:22:32 +1000, Dave Airlie wrote:
>  > On Tue, Mar 25, 2008 at 8:38 AM, Tilman Schmidt <tilman@imap.cc> wrote:
>  >> In the five days since I booted a 2.6.25-rc6 kernel on my development
>  >>  machine, it has happened three times already that I came back to the
>  >>  machine to find that the X server had exited, killing all applications
>  >>  that still had a window open. [...]
>
> >
>  > anything in the X.org logfiles?
>
>  Ah, of course. Sorry I forgot. Xorg.0.log.old ends with this:
>
>  | Backtrace:
>  | 0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
>  | 1: [0xb7fc9400]
>  | 2:
>  /usr/lib/xorg/modules//extensions/libGLcore.so(_swrast_Triangle+0x2d)
>  [0xb51ea5dd]
>  | 3: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb51f1075]
>  | 4: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb5206f2e]
>  | 5: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb52080b8]
>  | 6:
>  /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_run_pipeline+0x153)
>  [0xb520cb83]
>  | 7:
>  /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_draw_prims+0x3f0)
>  [0xb51f8340]
>  | 8:
>  /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_vtx_flush+0x1fb)
>  [0xb52471eb]
>  | 9:
>  /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_FlushVertices+0x78)
>  [0xb52488e8]
>  | 10: /usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_Flush+0x83)
>  [0xb5112663]
>  | 11: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c6a107]
>  | 12: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c4aa6d]
>  | 13: /usr/bin/X [0x815809e]
>  | 14: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
>  | 15: /usr/bin/X(main+0x47e) [0x807717e]
>  | 16: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7d5dfe0]
>  | 17: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
>  |
>  | Fatal server error:
>  | Caught signal 11.  Server aborting
>
>  I have put the entire file at
>  http://gollum.phnxsoft.com/~ts/linux/Xorg.0.log.old
>  in case you want to have a look.
>
>
>  > does it happen with DRI off?
>
>  I guess it does, as my Xorg.0.log{,.old} says:
>
>  | (WW) MGA(0): Direct rendering disabled
>
>  HTH
>  Tilman
>

Looks like a GL screensaver kicks in and blows away your X server sw-GL..

not sure how a new kernel could cause this though..

memory layout changes maybe..

Dave.
>

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-03-25  0:53     ` Dave Airlie
@ 2008-03-26 18:52       ` Pavel Machek
  2008-03-31  4:53       ` Dave Airlie
  1 sibling, 0 replies; 22+ messages in thread
From: Pavel Machek @ 2008-03-26 18:52 UTC (permalink / raw)
  To: Dave Airlie; +Cc: Tilman Schmidt, linux-kernel

On Tue 2008-03-25 10:53:38, Dave Airlie wrote:
> On Tue, Mar 25, 2008 at 9:45 AM, Tilman Schmidt <tilman@imap.cc> wrote:
> > On Tue, 25 Mar 2008 09:22:32 +1000, Dave Airlie wrote:
> >  > On Tue, Mar 25, 2008 at 8:38 AM, Tilman Schmidt <tilman@imap.cc> wrote:
> >  >> In the five days since I booted a 2.6.25-rc6 kernel on my development
> >  >>  machine, it has happened three times already that I came back to the
> >  >>  machine to find that the X server had exited, killing all applications
> >  >>  that still had a window open. [...]
> >
> > >
> >  > anything in the X.org logfiles?
> >
> >  Ah, of course. Sorry I forgot. Xorg.0.log.old ends with this:
> >
> >  | Backtrace:
> >  | 0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
> >  | 1: [0xb7fc9400]
> >  | 2:
> >  /usr/lib/xorg/modules//extensions/libGLcore.so(_swrast_Triangle+0x2d)
> >  [0xb51ea5dd]
> >  | 3: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb51f1075]
> >  | 4: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb5206f2e]
> >  | 5: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb52080b8]
> >  | 6:
> >  /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_run_pipeline+0x153)
> >  [0xb520cb83]
> >  | 7:
> >  /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_draw_prims+0x3f0)
> >  [0xb51f8340]
> >  | 8:
> >  /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_vtx_flush+0x1fb)
> >  [0xb52471eb]
> >  | 9:
> >  /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_FlushVertices+0x78)
> >  [0xb52488e8]
> >  | 10: /usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_Flush+0x83)
> >  [0xb5112663]
> >  | 11: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c6a107]
> >  | 12: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c4aa6d]
> >  | 13: /usr/bin/X [0x815809e]
> >  | 14: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
> >  | 15: /usr/bin/X(main+0x47e) [0x807717e]
> >  | 16: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7d5dfe0]
> >  | 17: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
> >  |
> >  | Fatal server error:
> >  | Caught signal 11.  Server aborting
> >
> >  I have put the entire file at
> >  http://gollum.phnxsoft.com/~ts/linux/Xorg.0.log.old
> >  in case you want to have a look.
> >
> >
> >  > does it happen with DRI off?
> >
> >  I guess it does, as my Xorg.0.log{,.old} says:
> >
> >  | (WW) MGA(0): Direct rendering disabled
> >
> >  HTH
> >  Tilman
> >
> 
> Looks like a GL screensaver kicks in and blows away your X server sw-GL..
> 
> not sure how a new kernel could cause this though..
> 
> memory layout changes maybe..

You can try to disable heap randomization...

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-03-25  0:53     ` Dave Airlie
  2008-03-26 18:52       ` Pavel Machek
@ 2008-03-31  4:53       ` Dave Airlie
  2008-03-31 17:45         ` Mark Lord
  2008-04-01  9:02         ` Tilman Schmidt
  1 sibling, 2 replies; 22+ messages in thread
From: Dave Airlie @ 2008-03-31  4:53 UTC (permalink / raw)
  To: Tilman Schmidt; +Cc: linux-kernel

On Tue, Mar 25, 2008 at 10:53 AM, Dave Airlie <airlied@gmail.com> wrote:
>
> On Tue, Mar 25, 2008 at 9:45 AM, Tilman Schmidt <tilman@imap.cc> wrote:
>  > On Tue, 25 Mar 2008 09:22:32 +1000, Dave Airlie wrote:
>  >  > On Tue, Mar 25, 2008 at 8:38 AM, Tilman Schmidt <tilman@imap.cc> wrote:
>  >  >> In the five days since I booted a 2.6.25-rc6 kernel on my development
>  >  >>  machine, it has happened three times already that I came back to the
>  >  >>  machine to find that the X server had exited, killing all applications
>  >  >>  that still had a window open. [...]
>  >
>  > >
>  >  > anything in the X.org logfiles?
>  >
>  >  Ah, of course. Sorry I forgot. Xorg.0.log.old ends with this:
>  >
>  >  | Backtrace:
>  >  | 0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
>  >  | 1: [0xb7fc9400]
>  >  | 2:
>  >  /usr/lib/xorg/modules//extensions/libGLcore.so(_swrast_Triangle+0x2d)
>  >  [0xb51ea5dd]
>  >  | 3: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb51f1075]
>  >  | 4: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb5206f2e]
>  >  | 5: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb52080b8]
>  >  | 6:
>  >  /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_run_pipeline+0x153)
>  >  [0xb520cb83]
>  >  | 7:
>  >  /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_draw_prims+0x3f0)
>  >  [0xb51f8340]
>  >  | 8:
>  >  /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_vtx_flush+0x1fb)
>  >  [0xb52471eb]
>  >  | 9:
>  >  /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_FlushVertices+0x78)
>  >  [0xb52488e8]
>  >  | 10: /usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_Flush+0x83)
>  >  [0xb5112663]
>  >  | 11: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c6a107]
>  >  | 12: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c4aa6d]
>  >  | 13: /usr/bin/X [0x815809e]
>  >  | 14: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
>  >  | 15: /usr/bin/X(main+0x47e) [0x807717e]
>  >  | 16: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7d5dfe0]
>  >  | 17: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
>  >  |
>  >  | Fatal server error:
>  >  | Caught signal 11.  Server aborting
>  >

any look finding what might have caused this?

it certainly looks like some heap or address space change affects Mesa.

Dave.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-03-31  4:53       ` Dave Airlie
@ 2008-03-31 17:45         ` Mark Lord
  2008-04-01  9:02         ` Tilman Schmidt
  1 sibling, 0 replies; 22+ messages in thread
From: Mark Lord @ 2008-03-31 17:45 UTC (permalink / raw)
  To: Dave Airlie; +Cc: Tilman Schmidt, linux-kernel

Dave Airlie wrote:
> On Tue, Mar 25, 2008 at 10:53 AM, Dave Airlie <airlied@gmail.com> wrote:
>> On Tue, Mar 25, 2008 at 9:45 AM, Tilman Schmidt <tilman@imap.cc> wrote:
>>  > On Tue, 25 Mar 2008 09:22:32 +1000, Dave Airlie wrote:
>>  >  > On Tue, Mar 25, 2008 at 8:38 AM, Tilman Schmidt <tilman@imap.cc> wrote:
>>  >  >> In the five days since I booted a 2.6.25-rc6 kernel on my development
>>  >  >>  machine, it has happened three times already that I came back to the
>>  >  >>  machine to find that the X server had exited, killing all applications
>>  >  >>  that still had a window open. [...]
>>  >
>>  > >
>>  >  > anything in the X.org logfiles?
>>  >
>>  >  Ah, of course. Sorry I forgot. Xorg.0.log.old ends with this:
>>  >
>>  >  | Backtrace:
>>  >  | 0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
>>  >  | 1: [0xb7fc9400]
>>  >  | 2:
>>  >  /usr/lib/xorg/modules//extensions/libGLcore.so(_swrast_Triangle+0x2d)
>>  >  [0xb51ea5dd]
>>  >  | 3: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb51f1075]
>>  >  | 4: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb5206f2e]
>>  >  | 5: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb52080b8]
>>  >  | 6:
>>  >  /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_run_pipeline+0x153)
>>  >  [0xb520cb83]
>>  >  | 7:
>>  >  /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_draw_prims+0x3f0)
>>  >  [0xb51f8340]
>>  >  | 8:
>>  >  /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_vtx_flush+0x1fb)
>>  >  [0xb52471eb]
>>  >  | 9:
>>  >  /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_FlushVertices+0x78)
>>  >  [0xb52488e8]
>>  >  | 10: /usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_Flush+0x83)
>>  >  [0xb5112663]
>>  >  | 11: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c6a107]
>>  >  | 12: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c4aa6d]
>>  >  | 13: /usr/bin/X [0x815809e]
>>  >  | 14: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
>>  >  | 15: /usr/bin/X(main+0x47e) [0x807717e]
>>  >  | 16: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7d5dfe0]
>>  >  | 17: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
>>  >  |
>>  >  | Fatal server error:
>>  >  | Caught signal 11.  Server aborting
>>  >
> 
> any look finding what might have caused this?
> 
> it certainly looks like some heap or address space change affects Mesa.
...

Mmm.. I've had one X-server death so far with 2.6.25-rc7.
Didn't keep the logfile, though.

-ml

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-03-31  4:53       ` Dave Airlie
  2008-03-31 17:45         ` Mark Lord
@ 2008-04-01  9:02         ` Tilman Schmidt
  2008-04-06  7:44           ` Dave Airlie
  2008-04-07 22:22           ` [2.6.25-rc6] possible regression: X server dying Tilman Schmidt
  1 sibling, 2 replies; 22+ messages in thread
From: Tilman Schmidt @ 2008-04-01  9:02 UTC (permalink / raw)
  To: Dave Airlie; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3020 bytes --]

On Mon, 31 Mar 2008 14:53:29 +1000, Dave Airlie wrote:
> On Tue, Mar 25, 2008 at 10:53 AM, Dave Airlie <airlied@gmail.com> wrote:
>>
>> On Tue, Mar 25, 2008 at 9:45 AM, Tilman Schmidt <tilman@imap.cc> wrote:
[...]
>>  >  | Backtrace:
>>  >  | 0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
>>  >  | 1: [0xb7fc9400]
>>  >  | 2: /usr/lib/xorg/modules//extensions/libGLcore.so(_swrast_Triangle+0x2d) [0xb51ea5dd]
>>  >  | 3: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb51f1075]
>>  >  | 4: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb5206f2e]
>>  >  | 5: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb52080b8]
>>  >  | 6: /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_run_pipeline+0x153) [0xb520cb83]
>>  >  | 7: /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_draw_prims+0x3f0) [0xb51f8340]
>>  >  | 8: /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_vtx_flush+0x1fb) [0xb52471eb]
>>  >  | 9: /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_FlushVertices+0x78) [0xb52488e8]
>>  >  | 10: /usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_Flush+0x83) [0xb5112663]
>>  >  | 11: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c6a107]
>>  >  | 12: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c4aa6d]
>>  >  | 13: /usr/bin/X [0x815809e]
>>  >  | 14: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
>>  >  | 15: /usr/bin/X(main+0x47e) [0x807717e]
>>  >  | 16: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7d5dfe0]
>>  >  | 17: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
>>  >  |
>>  >  | Fatal server error:
>>  >  | Caught signal 11.  Server aborting
> 
> any look finding what might have caused this?

Not really. It's obviously triggered by the screensaver. The machine
runs SuSE's default: gnome-screensaver with mode = random and a list
of 189 candidate screensavers, so I can't tell which one(s) of those
actually triggers the problem.

But perhaps that doesn't matter anyway. I recently collected another
X backtrace with kernel 2.6.25-rc7 which looks quite different in
the libglx section:

0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
1: [0xb7ef7400]
2: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7d8e8]
3: /usr/lib/xorg/modules//extensions/libglx.so(DoRender+0xdd) [0xb7b7645d]
4: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7657c]
5: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7aa6d]
6: /usr/bin/X [0x815809e]
7: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
8: /usr/bin/X(main+0x47e) [0x807717e]
9: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7c8bfe0]
10: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]

But I know next to nothing about GL, so I'm out of my depth there.
I'd welcome any suggestions on how to provoke the crash more
regularly so that I could attempt to bisect.

Thanks,
Tilman

-- 
Tilman Schmidt                    E-Mail: tilman@imap.cc
Bonn, Germany
Diese Nachricht besteht zu 100% aus wiederverwerteten Bits.
Ungeöffnet mindestens haltbar bis: (siehe Rückseite)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 250 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-01  9:02         ` Tilman Schmidt
@ 2008-04-06  7:44           ` Dave Airlie
  2008-04-06 14:34             ` Gerhard Pircher
  2008-04-19 11:30             ` [2.6.25] X server dying due to lock not being held Gerhard Pircher
  2008-04-07 22:22           ` [2.6.25-rc6] possible regression: X server dying Tilman Schmidt
  1 sibling, 2 replies; 22+ messages in thread
From: Dave Airlie @ 2008-04-06  7:44 UTC (permalink / raw)
  To: Tilman Schmidt; +Cc: linux-kernel

On Tue, Apr 1, 2008 at 7:02 PM, Tilman Schmidt <tilman@imap.cc> wrote:
> On Mon, 31 Mar 2008 14:53:29 +1000, Dave Airlie wrote:
>
> > On Tue, Mar 25, 2008 at 10:53 AM, Dave Airlie <airlied@gmail.com> wrote:
> >
> > >
> > > On Tue, Mar 25, 2008 at 9:45 AM, Tilman Schmidt <tilman@imap.cc> wrote:
> > >
> >
>  [...]
>
>
> >
> > >  >  | Backtrace:
> > >  >  | 0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
> > >  >  | 1: [0xb7fc9400]
> > >  >  | 2:
> /usr/lib/xorg/modules//extensions/libGLcore.so(_swrast_Triangle+0x2d)
> [0xb51ea5dd]
> > >  >  | 3: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb51f1075]
> > >  >  | 4: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb5206f2e]
> > >  >  | 5: /usr/lib/xorg/modules//extensions/libGLcore.so [0xb52080b8]
> > >  >  | 6:
> /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_run_pipeline+0x153)
> [0xb520cb83]
> > >  >  | 7:
> /usr/lib/xorg/modules//extensions/libGLcore.so(_tnl_draw_prims+0x3f0)
> [0xb51f8340]
> > >  >  | 8:
> /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_vtx_flush+0x1fb)
> [0xb52471eb]
> > >  >  | 9:
> /usr/lib/xorg/modules//extensions/libGLcore.so(vbo_exec_FlushVertices+0x78)
> [0xb52488e8]
> > >  >  | 10:
> /usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_Flush+0x83)
> [0xb5112663]
> > >  >  | 11: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c6a107]
> > >  >  | 12: /usr/lib/xorg/modules//extensions/libglx.so [0xb7c4aa6d]
> > >  >  | 13: /usr/bin/X [0x815809e]
> > >  >  | 14: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
> > >  >  | 15: /usr/bin/X(main+0x47e) [0x807717e]
> > >  >  | 16: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7d5dfe0]
> > >  >  | 17: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
> > >  >  |
> > >  >  | Fatal server error:
> > >  >  | Caught signal 11.  Server aborting
> > >
> >
> > any look finding what might have caused this?
> >
>
>  Not really. It's obviously triggered by the screensaver. The machine
>  runs SuSE's default: gnome-screensaver with mode = random and a list
>  of 189 candidate screensavers, so I can't tell which one(s) of those
>  actually triggers the problem.
>
>  But perhaps that doesn't matter anyway. I recently collected another
>  X backtrace with kernel 2.6.25-rc7 which looks quite different in
>  the libglx section:
>
>
>  0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
>  1: [0xb7ef7400]
>  2: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7d8e8]
>  3: /usr/lib/xorg/modules//extensions/libglx.so(DoRender+0xdd) [0xb7b7645d]
>  4: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7657c]
>  5: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7aa6d]
>  6: /usr/bin/X [0x815809e]
>
>  7: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
>  8: /usr/bin/X(main+0x47e) [0x807717e]
>  9: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7c8bfe0]
>  10: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
>
>  But I know next to nothing about GL, so I'm out of my depth there.
>  I'd welcome any suggestions on how to provoke the crash more
>  regularly so that I could attempt to bisect.

Its one of the GL screensavers, not sure how to narrow it down, use
ldd to figure out which ones are using GL.

I've no idea how the kernel is influencing this.

Dave.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-06  7:44           ` Dave Airlie
@ 2008-04-06 14:34             ` Gerhard Pircher
  2008-04-07 22:27               ` Dave Airlie
  2008-04-19 11:30             ` [2.6.25] X server dying due to lock not being held Gerhard Pircher
  1 sibling, 1 reply; 22+ messages in thread
From: Gerhard Pircher @ 2008-04-06 14:34 UTC (permalink / raw)
  To: Dave Airlie; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 2843 bytes --]

-------- Original-Nachricht --------
> Datum: Sun, 6 Apr 2008 17:44:25 +1000
> Von: "Dave Airlie" <airlied@gmail.com>
> An: "Tilman Schmidt" <tilman@imap.cc>
> CC: linux-kernel@vger.kernel.org
> Betreff: Re: [2.6.25-rc6] possible regression: X server dying

> >  0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
> >  1: [0xb7ef7400]
> >  2: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7d8e8]
> >  3: /usr/lib/xorg/modules//extensions/libglx.so(DoRender+0xdd)
> [0xb7b7645d]
> >  4: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7657c]
> >  5: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7aa6d]
> >  6: /usr/bin/X [0x815809e]
> >
> >  7: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
> >  8: /usr/bin/X(main+0x47e) [0x807717e]
> >  9: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7c8bfe0]
> >  10: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
> >
> >  But I know next to nothing about GL, so I'm out of my depth there.
> >  I'd welcome any suggestions on how to provoke the crash more
> >  regularly so that I could attempt to bisect.
> 
> Its one of the GL screensavers, not sure how to narrow it down, use
> ldd to figure out which ones are using GL.
> 
> I've no idea how the kernel is influencing this.
> 
> Dave.

Sorry for hijacking this thread, but I have a similar problem with the
Xorg X server. I'm using kernel 2.6.25-rc8 on my AmigaOne (PowerPC) and
the X server dies right on startup, but only if DRI/DRM is enabled.
I tested this with both Xorg 7.1 (Debian Etch version) and Xorg 7.2
(Lenny). The X server was working fine with kernel 2.6.25-rc6. I have
to mention that the AmigaOne uses uncached memory for DMA operations.
Benjamin Herrenschmidt fixed DRI recently for non cache coherent systems
and his patches are working fine (I applied them to kernel 2.6.25-rc6).
Please take a look at the attached Xorg.0.log file or at the excerpt
below:

(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1

Backtrace:
0: /usr/bin/X(xf86SigHandler+0x94) [0x100934c4]
1: [0x100374]
2: [0x102272a8]
3: /usr/lib/xorg/modules/extensions//libdri.so(DRIFinishScreenInit+0xb0) [0xf9948b0]
4: /usr/lib/xorg/modules/drivers//radeon_drv.so(RADEONDRIFinishScreenInit+0x68) [0xf8a699c]
5: /usr/lib/xorg/modules/drivers//radeon_drv.so(RADEONScreenInit+0xf74) [0xf895f78]
6: /usr/bin/X(AddScreen+0x21c) [0x1002d79c]
7: /usr/bin/X(InitOutput+0x284) [0x1006d364]
8: /usr/bin/X(main+0x294) [0x1002e004]
9: /lib/libc.so.6 [0xfc75b10]
10: /lib/libc.so.6 [0xfc75cd0]

Fatal server error:
Caught signal 11.  Server aborting

(**) RADEON(0): RADEONLeaveVT

regards,

Gerhard

BTW: Please put me on CC:!
-- 
Psst! Geheimtipp: Online Games kostenlos spielen bei den GMX Free Games! 
http://games.entertainment.gmx.net/de/entertainment/games/free

[-- Attachment #2: Xorg.0.log --]
[-- Type: text/x-log, Size: 51363 bytes --]


X Window System Version 1.3.0
Release Date: 19 April 2007
X Protocol Version 11, Revision 0, Release 1.3
Build Operating System: Linux Debian (xorg-server 2:1.3.0.0.dfsg-12)
Current Operating System: Linux amigaone 2.6.25-rc8 #84 Thu Apr 3 22:52:51 CEST 2008 ppc
Build Date: 17 August 2007
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr  5 23:27:42 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) |   |-->Monitor "LCD2080UXi"
(**) |   |-->Device "ATI Technologies Inc RV280 [Radeon 9200]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
	Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
	Entry deleted from font path.
(==) FontPath set to:
	/usr/share/fonts/X11/misc,
	/usr/share/fonts/X11/100dpi/:unscaled,
	/usr/share/fonts/X11/75dpi/:unscaled,
	/usr/share/fonts/X11/Type1,
	/usr/share/fonts/X11/100dpi,
	/usr/share/fonts/X11/75dpi
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x101f9688
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 1.2
	X.Org XInput driver : 0.7
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Video Driver, version 1.2
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10cc,0660 card 0000,0000 rev 01 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 10cc,0661 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:06:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00
(II) PCI: 00:07:0: chip 1106,0686 card 0000,0000 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 1a class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 40 class 00,00,00 hdr 00
(II) PCI: 00:07:5: chip 1106,3058 card 0000,0000 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:07:6: chip 1106,3068 card 0000,0000 rev 30 class 07,80,00 hdr 00
(II) PCI: 00:08:0: chip 109e,036e card 0070,13eb rev 11 class 04,00,00 hdr 80
(II) PCI: 00:08:1: chip 109e,0878 card 0070,13eb rev 11 class 04,80,00 hdr 80
(II) PCI: 00:09:0: chip 1102,0002 card 1102,8067 rev 0a class 04,01,00 hdr 80
(II) PCI: 00:09:1: chip 1102,7002 card 1102,0020 rev 0a class 09,80,00 hdr 80
(II) PCI: 00:0a:0: chip 10b9,5237 card 10b9,5272 rev 03 class 0c,03,10 hdr 80
(II) PCI: 00:0a:1: chip 10b9,5237 card 10b9,5272 rev 03 class 0c,03,10 hdr 80
(II) PCI: 00:0a:2: chip 10b9,5237 card 10b9,5272 rev 03 class 0c,03,10 hdr 80
(II) PCI: 00:0a:3: chip 10b9,5239 card 10b9,5272 rev 01 class 0c,03,20 hdr 80
(II) PCI: 00:0a:4: chip 10b9,5253 card 10b9,5253 rev 00 class 0c,00,10 hdr 80
(II) PCI: 01:00:0: chip 1002,5961 card 174b,7c13 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5941 card 174b,7c12 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0x88000000 - 0x880fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0x80000000 - 0x87ffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI: (0:8:0) Brooktree Corporation Bt878 Video Capture rev 17, Mem @ 0x98101000/12
(--) PCI:*(1:0:0) ATI Technologies Inc RV280 [Radeon 9200] rev 1, Mem @ 0x80000000/27, 0x88000000/16, I/O @ 0x2000/8, BIOS @ 0x88020000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV280 [Radeon 9200] (Secondary) rev 1, Mem @ 0x90000000/0, 0x88010000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
	[0] -1	0	0x98106800 - 0x98106fff (0x800) MX[B]
	[1] -1	0	0x98106000 - 0x981060ff (0x100) MX[B]
	[2] -1	0	0x98105000 - 0x98105fff (0x1000) MX[B]
	[3] -1	0	0x98104000 - 0x98104fff (0x1000) MX[B]
	[4] -1	0	0x98103000 - 0x98103fff (0x1000) MX[B]
	[5] -1	0	0x98102000 - 0x98102fff (0x1000) MX[B]
	[6] -1	0	0x98100000 - 0x9810007f (0x80) MX[B]
	[7] -1	0	0x88010000 - 0x8801ffff (0x10000) MX[B](B)
	[8] -1	0	0x90000000 - 0x90000000 (0x1) MX[B](B)
	[9] -1	0	0x88020000 - 0x8803ffff (0x20000) MX[B](B)
	[10] -1	0	0x88000000 - 0x8800ffff (0x10000) MX[B](B)
	[11] -1	0	0x80000000 - 0x87ffffff (0x8000000) MX[B](B)
	[12] -1	0	0x98101000 - 0x98101fff (0x1000) MX[B](B)
	[13] -1	0	0xfe802420 - 0xfe802427 (0x8) IX[B]
	[14] -1	0	0xfe802400 - 0xfe80241f (0x20) IX[B]
	[15] -1	0	0xfe802300 - 0xfe8023ff (0x100) IX[B]
	[16] -1	0	0xfe802204 - 0xfe802207 (0x4) IX[B]
	[17] -1	0	0xfe802200 - 0xfe802203 (0x4) IX[B]
	[18] -1	0	0xfe802100 - 0xfe8021ff (0x100) IX[B]
	[19] -1	0	0xfe8020a0 - 0xfe8020bf (0x20) IX[B]
	[20] -1	0	0xfe802080 - 0xfe80209f (0x20) IX[B]
	[21] -1	0	0xfe00cc00 - 0xfe00cc0f (0x10) IX[B]
	[22] -1	0	0xfe802000 - 0xfe80207f (0x80) IX[B]
	[23] -1	0	0xfe002000 - 0xfe0020ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0x98106800 - 0x98106fff (0x800) MX[B]
	[1] -1	0	0x98106000 - 0x981060ff (0x100) MX[B]
	[2] -1	0	0x98105000 - 0x98105fff (0x1000) MX[B]
	[3] -1	0	0x98104000 - 0x98104fff (0x1000) MX[B]
	[4] -1	0	0x98103000 - 0x98103fff (0x1000) MX[B]
	[5] -1	0	0x98102000 - 0x98102fff (0x1000) MX[B]
	[6] -1	0	0x98100000 - 0x9810007f (0x80) MX[B]
	[7] -1	0	0x88010000 - 0x8801ffff (0x10000) MX[B](B)
	[8] -1	0	0x90000000 - 0x90000000 (0x1) MX[B](B)
	[9] -1	0	0x88020000 - 0x8803ffff (0x20000) MX[B](B)
	[10] -1	0	0x88000000 - 0x8800ffff (0x10000) MX[B](B)
	[11] -1	0	0x80000000 - 0x87ffffff (0x8000000) MX[B](B)
	[12] -1	0	0x98101000 - 0x98101fff (0x1000) MX[B](B)
	[13] -1	0	0xfe802420 - 0xfe802427 (0x8) IX[B]
	[14] -1	0	0xfe802400 - 0xfe80241f (0x20) IX[B]
	[15] -1	0	0xfe802300 - 0xfe8023ff (0x100) IX[B]
	[16] -1	0	0xfe802204 - 0xfe802207 (0x4) IX[B]
	[17] -1	0	0xfe802200 - 0xfe802203 (0x4) IX[B]
	[18] -1	0	0xfe802100 - 0xfe8021ff (0x100) IX[B]
	[19] -1	0	0xfe8020a0 - 0xfe8020bf (0x20) IX[B]
	[20] -1	0	0xfe802080 - 0xfe80209f (0x20) IX[B]
	[21] -1	0	0xfe00cc00 - 0xfe00cc0f (0x10) IX[B]
	[22] -1	0	0xfe802000 - 0xfe80207f (0x80) IX[B]
	[23] -1	0	0xfe002000 - 0xfe0020ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x98106800 - 0x98106fff (0x800) MX[B]
	[5] -1	0	0x98106000 - 0x981060ff (0x100) MX[B]
	[6] -1	0	0x98105000 - 0x98105fff (0x1000) MX[B]
	[7] -1	0	0x98104000 - 0x98104fff (0x1000) MX[B]
	[8] -1	0	0x98103000 - 0x98103fff (0x1000) MX[B]
	[9] -1	0	0x98102000 - 0x98102fff (0x1000) MX[B]
	[10] -1	0	0x98100000 - 0x9810007f (0x80) MX[B]
	[11] -1	0	0x88010000 - 0x8801ffff (0x10000) MX[B](B)
	[12] -1	0	0x90000000 - 0x90000000 (0x1) MX[B](B)
	[13] -1	0	0x88020000 - 0x8803ffff (0x20000) MX[B](B)
	[14] -1	0	0x88000000 - 0x8800ffff (0x10000) MX[B](B)
	[15] -1	0	0x80000000 - 0x87ffffff (0x8000000) MX[B](B)
	[16] -1	0	0x98101000 - 0x98101fff (0x1000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0xfe802420 - 0xfe802427 (0x8) IX[B]
	[20] -1	0	0xfe802400 - 0xfe80241f (0x20) IX[B]
	[21] -1	0	0xfe802300 - 0xfe8023ff (0x100) IX[B]
	[22] -1	0	0xfe802204 - 0xfe802207 (0x4) IX[B]
	[23] -1	0	0xfe802200 - 0xfe802203 (0x4) IX[B]
	[24] -1	0	0xfe802100 - 0xfe8021ff (0x100) IX[B]
	[25] -1	0	0xfe8020a0 - 0xfe8020bf (0x20) IX[B]
	[26] -1	0	0xfe802080 - 0xfe80209f (0x20) IX[B]
	[27] -1	0	0xfe00cc00 - 0xfe00cc0f (0x10) IX[B]
	[28] -1	0	0xfe802000 - 0xfe80207f (0x80) IX[B]
	[29] -1	0	0xfe002000 - 0xfe0020ff (0x100) IX[B](B)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.3.0, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 6.6.3
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.2.1
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 0.7
(II) ATI: ATI driver (version 6.6.3) for chipset: ati
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
	ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
	ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
	ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
	ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
	ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
	ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
	ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
	ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
	ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
	ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
	ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
	ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
	ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
	ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
	ATI Radeon Mobility 9000 (M9) Lf (AGP),
	ATI Radeon Mobility 9000 (M9) Lg (AGP),
	ATI Radeon 9100 IGP (A5) 5834,
	ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
	ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
	ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
	ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
	ATI FireGL RV360 AV (AGP),
	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
	ATI Radeon Mobility 9600 (M10) NQ (AGP),
	ATI Radeon Mobility 9600 (M11) NR (AGP),
	ATI Radeon Mobility 9600 (M10) NS (AGP),
	ATI FireGL Mobility T2 (M10) NT (AGP),
	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
	ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
	ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
	ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
	ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
	ATI Radeon X600 (RV380) 3E50 (PCIE),
	ATI FireGL V3200 (RV380) 3E54 (PCIE),
	ATI Radeon Mobility X600 (M24) 3150 (PCIE),
	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
	ATI Radeon X600 (RV370) 5B62 (PCIE),
	ATI Radeon X550 (RV370) 5B63 (PCIE),
	ATI FireGL V3100 (RV370) 5B64 (PCIE),
	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
	ATI Radeon XPRESS 200M 5A42 (PCIE),
	ATI Radeon XPRESS 200 5A61 (PCIE),
	ATI Radeon XPRESS 200M 5A62 (PCIE),
	ATI Radeon XPRESS 200 5954 (PCIE),
	ATI Radeon XPRESS 200M 5955 (PCIE),
	ATI Radeon XPRESS 200 5974 (PCIE),
	ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility FireGL V5000 (M26) (PCIE),
	ATI Mobility Radeon X700 XL (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Mobility Radeon X700 (M26) (PCIE),
	ATI Radeon X700 PRO (RV410) (PCIE),
	ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
	ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
	ATI Radeon Mobility 9800 (M18) JN (AGP),
	ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
	ATI Radeon AIW X800 VE (R420) JT (AGP),
	ATI Radeon X800 (R423) UH (PCIE),
	ATI Radeon X800PRO (R423) UI (PCIE),
	ATI Radeon X800LE (R423) UJ (PCIE),
	ATI Radeon X800SE (R423) UK (PCIE),
	ATI FireGL V5100 (R423) UQ (PCIE),
	ATI FireGL unknown (R423) UR (PCIE),
	ATI FireGL unknown (R423) UT (PCIE),
	ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
	ATI Mobility FireGL V5100 (M28) (PCIE),
	ATI Mobility Radeon X800 (M28) (PCIE),
	ATI Mobility Radeon X800 XT (M28) (PCIE),
	ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
	ATI Radeon X850 5D4C (PCIE),
	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
	ATI Radeon X850 XT (R480) (PCIE),
	ATI Radeon X850 XT PE (R480) (PCIE),
	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI:  Candidate "Device" section "ATI Technologies Inc RV280 [Radeon 9200]".
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI Radeon 9200 5961 (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x98106800 - 0x98106fff (0x800) MX[B]
	[5] -1	0	0x98106000 - 0x981060ff (0x100) MX[B]
	[6] -1	0	0x98105000 - 0x98105fff (0x1000) MX[B]
	[7] -1	0	0x98104000 - 0x98104fff (0x1000) MX[B]
	[8] -1	0	0x98103000 - 0x98103fff (0x1000) MX[B]
	[9] -1	0	0x98102000 - 0x98102fff (0x1000) MX[B]
	[10] -1	0	0x98100000 - 0x9810007f (0x80) MX[B]
	[11] -1	0	0x88010000 - 0x8801ffff (0x10000) MX[B](B)
	[12] -1	0	0x90000000 - 0x90000000 (0x1) MX[B](B)
	[13] -1	0	0x88020000 - 0x8803ffff (0x20000) MX[B](B)
	[14] -1	0	0x88000000 - 0x8800ffff (0x10000) MX[B](B)
	[15] -1	0	0x80000000 - 0x87ffffff (0x8000000) MX[B](B)
	[16] -1	0	0x98101000 - 0x98101fff (0x1000) MX[B](B)
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0xfe802420 - 0xfe802427 (0x8) IX[B]
	[20] -1	0	0xfe802400 - 0xfe80241f (0x20) IX[B]
	[21] -1	0	0xfe802300 - 0xfe8023ff (0x100) IX[B]
	[22] -1	0	0xfe802204 - 0xfe802207 (0x4) IX[B]
	[23] -1	0	0xfe802200 - 0xfe802203 (0x4) IX[B]
	[24] -1	0	0xfe802100 - 0xfe8021ff (0x100) IX[B]
	[25] -1	0	0xfe8020a0 - 0xfe8020bf (0x20) IX[B]
	[26] -1	0	0xfe802080 - 0xfe80209f (0x20) IX[B]
	[27] -1	0	0xfe00cc00 - 0xfe00cc0f (0x10) IX[B]
	[28] -1	0	0xfe802000 - 0xfe80207f (0x80) IX[B]
	[29] -1	0	0xfe002000 - 0xfe0020ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
	compiled for 7.1.1, module version = 4.2.0
	Module class: X.Org Video Driver
	ABI class: X.Org Video Driver, version 1.0
(WW) ****INVALID IO ALLOCATION**** b: 0xfe002000 e: 0xfe0020ff correcting\a
(EE) end of block range 0xfdffffff < begin 0xfe000000
(II) window:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
(II) window fixed:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x98106800 - 0x98106fff (0x800) MX[B]
	[5] -1	0	0x98106000 - 0x981060ff (0x100) MX[B]
	[6] -1	0	0x98105000 - 0x98105fff (0x1000) MX[B]
	[7] -1	0	0x98104000 - 0x98104fff (0x1000) MX[B]
	[8] -1	0	0x98103000 - 0x98103fff (0x1000) MX[B]
	[9] -1	0	0x98102000 - 0x98102fff (0x1000) MX[B]
	[10] -1	0	0x98100000 - 0x9810007f (0x80) MX[B]
	[11] -1	0	0x88010000 - 0x8801ffff (0x10000) MX[B](B)
	[12] -1	0	0x90000000 - 0x90000000 (0x1) MX[B](B)
	[13] -1	0	0x88020000 - 0x8803ffff (0x20000) MX[B](B)
	[14] -1	0	0x88000000 - 0x8800ffff (0x10000) MX[B](B)
	[15] -1	0	0x80000000 - 0x87ffffff (0x8000000) MX[B](B)
	[16] -1	0	0x98101000 - 0x98101fff (0x1000) MX[B](B)
	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[20] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[21] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[22] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[23] -1	0	0xfe802420 - 0xfe802427 (0x8) IX[B]
	[24] -1	0	0xfe802400 - 0xfe80241f (0x20) IX[B]
	[25] -1	0	0xfe802300 - 0xfe8023ff (0x100) IX[B]
	[26] -1	0	0xfe802204 - 0xfe802207 (0x4) IX[B]
	[27] -1	0	0xfe802200 - 0xfe802203 (0x4) IX[B]
	[28] -1	0	0xfe802100 - 0xfe8021ff (0x100) IX[B]
	[29] -1	0	0xfe8020a0 - 0xfe8020bf (0x20) IX[B]
	[30] -1	0	0xfe802080 - 0xfe80209f (0x20) IX[B]
	[31] -1	0	0xfe00cc00 - 0xfe00cc0f (0x10) IX[B]
	[32] -1	0	0xfe802000 - 0xfe80207f (0x80) IX[B]
	[33] 0	0	0xfe0003b0 - 0xfe0003bb (0xc) IS[B]
	[34] 0	0	0xfe0003c0 - 0xfe0003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0x88000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "BusType" "PCI"
(**) RADEON(0): Option "AccelMethod" "EXA"
(II) RADEON(0): VGAAccess option set to FALSE, VGA module load skipped
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(==) RADEON(0): X server will not keep DPI constant for all screen sizes
(--) RADEON(0): Chipset: "ATI Radeon 9200 5961 (AGP)" (ChipID = 0x5961)
(--) RADEON(0): Linear framebuffer at 0x80000000
(--) RADEON(0): BIOS at 0x88020000
(II) RADEON(0): AGP card detected
(**) RADEON(0): Forced into PCI mode
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: drmOpenMinor returns 5
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.28.0
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEON(0): Page flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=131072K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 131072 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"(II) Module already built-in
(II) RADEON(0): I2C bus "DDC" initialized.
(II) Attempted to read BIOS 64KB from /sys/bus/pci/devices/0000:01:00.0/rom: got 52KB
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 2, Detected Type: 3
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(II) RADEON(0): EDID data from the display on port 1 ----------------------
(II) RADEON(0): Manufacturer: NEC  Model: 669a  Serial#: 16843009
(II) RADEON(0): Year: 2005  Week: 44
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 41  vert.: 31
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.639 redY: 0.342   greenX: 0.290 greenY: 0.615
(II) RADEON(0): blueX: 0.146 blueY: 0.072   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): 1152x870@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) RADEON(0): #1: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) RADEON(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) RADEON(0): #3: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) RADEON(0): #4: hsize: 1280  vsize 960  refresh: 85  vid: 22913
(II) RADEON(0): #5: hsize: 1280  vsize 1024  refresh: 85  vid: 39297
(II) RADEON(0): #6: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 162.0 MHz   Image Size:  408 x 306 mm
(II) RADEON(0): h_active: 1600  h_sync: 1664  h_sync_end 1856 h_blank_end 2160 h_border: 0
(II) RADEON(0): v_active: 1200  v_sync: 1201  v_sync_end 1204 v_blanking: 1250 v_border: 0
(II) RADEON(0): Ranges: V min: 50  V max: 85 Hz, H min: 31  H max: 92 kHz, PixClock max 170 MHz
(II) RADEON(0): Monitor name: LCD2080UXi
(II) RADEON(0): Serial No: 5Y102473YB
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 	00ffffffffffff0038a39a6601010101
(II) RADEON(0): 	2c0f010380291f78eaa6a5a3574a9d25
(II) RADEON(0): 	125054bfef80315945596159714f8159
(II) RADEON(0): 	8199a9400101483f403062b0324040c0
(II) RADEON(0): 	130098321100001e000000fd0032551f
(II) RADEON(0): 	5c11000a202020202020000000fc004c
(II) RADEON(0): 	4344323038305558690a2020000000ff
(II) RADEON(0): 	00355931303234373359420a2020000b
(II) RADEON(0): 
(II) RADEON(0): Primary:
 Monitor   -- TMDS
 Connector -- DVI-I
 DAC Type  -- TVDAC/ExtDAC
 TMDS Type -- Internal
 DDC Type  -- DVI_DDC
(II) RADEON(0): Secondary:
 Monitor   -- CRT
 Connector -- VGA
 DAC Type  -- Primary
 TMDS Type -- NONE
 DDC Type  -- VGA_DDC
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=20000
(WW) RADEON(0): Failed to detect secondary monitor DDC, default HSync and VRefresh used
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): DFP table revision: 4
(II) RADEON(0): Panel infos found from DDC detailed: 1600x1200
(II) RADEON(0): Valid Mode from Detailed timing table: 1600x1200
(II) RADEON(0): Valid Mode from standard timing table: 640x480
(II) RADEON(0): Valid Mode from standard timing table: 800x600
(II) RADEON(0): Valid Mode from standard timing table: 1024x768
(II) RADEON(0): Valid Mode from standard timing table: 1152x864
(II) RADEON(0): Valid Mode from standard timing table: 1280x960
(II) RADEON(0): Valid Mode from standard timing table: 1280x1024
(II) RADEON(0): Valid Mode from standard timing table: 1600x1200
(II) RADEON(0): Valid Mode from established timing table: 1280x1024
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 1024x768
(II) RADEON(0): Valid Mode from established timing table: 832x624
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 800x600
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Valid Mode from established timing table: 640x480
(II) RADEON(0): Total of 20 mode(s) found.
(II) RADEON(0): Total number of valid DDC mode(s) found: 20
(II) RADEON(0): Validating CRTC2 modes for MergedFB ------------ 
(II) RADEON(0): CRT2 Monitor: Using default hsync range of 31.50-37.90 kHz
(II) RADEON(0): CRT2 Monitor: Using default vrefresh range of 50.00-70.00 Hz
(II) RADEON(0): Clock range:  20.00 to 400.00 MHz
(II) RADEON(0): Not using default mode "640x350" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "720x400" (vrefresh out of range)
(II) RADEON(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (mode clock too high)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (vrefresh out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "640x480" (hsync out of range)
(II) RADEON(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "800x600" (mode clock too high)
(II) RADEON(0): Not using default mode "400x300" (mode clock too high)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (hsync out of range)
(II) RADEON(0): Not using default mode "400x300" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (vrefresh out of range)
(II) RADEON(0): Not using default mode "512x384" (vrefresh out of range)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1024x768" (hsync out of range)
(II) RADEON(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x960" (hsync out of range)
(II) RADEON(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1792x1344" (hsync out of range)
(II) RADEON(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1856x1392" (hsync out of range)
(II) RADEON(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "832x624" (hsync out of range)
(II) RADEON(0): Not using default mode "416x312" (hsync out of range)
(II) RADEON(0): Not using default mode "1280x768" (hsync out of range)
(II) RADEON(0): Not using default mode "640x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1280x800" (hsync out of range)
(II) RADEON(0): Not using default mode "640x400" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x768" (hsync out of range)
(II) RADEON(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1152x864" (hsync out of range)
(II) RADEON(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1400x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1440x900" (hsync out of range)
(II) RADEON(0): Not using default mode "720x450" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1600x1024" (hsync out of range)
(II) RADEON(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1680x1050" (hsync out of range)
(II) RADEON(0): Not using default mode "840x525" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1200" (hsync out of range)
(II) RADEON(0): Not using default mode "960x600" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "1920x1440" (hsync out of range)
(II) RADEON(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) RADEON(0): Not using default mode "2048x1536" (hsync out of range)
(II) RADEON(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(WW) RADEON(0): Mode pool is empty
(EE) RADEON(0): No valid modes found
(EE) RADEON(0): No valid mode found for CRTC2, disabling MergedFB
(II) RADEON(0): Total of 0 CRTC2 modes found for MergedFB------------ 
(--) RADEON(0): Virtual size is 1600x1200 (pitch 1600)
(**) RADEON(0): *Default mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1600x1200"  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
(**) RADEON(0): *Default mode "1280x1024": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024"  162.00  1280 1664 1856 2160  1024 1201 1204 1250 +hsync +vsync
(**) RADEON(0): *Default mode "1024x768": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"  162.00  1024 1664 1856 2160  768 1201 1204 1250 +hsync +vsync
(**) RADEON(0): *Default mode "800x600": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600"  162.00  800 1664 1856 2160  600 1201 1204 1250 +hsync +vsync
(**) RADEON(0): *Default mode "640x480": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"  162.00  640 1664 1856 2160  480 1201 1204 1250 -hsync -vsync
(**) RADEON(0):  Default mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1600x1200"  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync
(**) RADEON(0):  Default mode "1280x1024": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024"  162.00  1280 1664 1856 2160  1024 1201 1204 1250 +hsync +vsync
(**) RADEON(0):  Default mode "1280x960": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x960"  162.00  1280 1664 1856 2160  960 1201 1204 1250 +hsync +vsync
(**) RADEON(0):  Default mode "1152x864": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1152x864"  162.00  1152 1664 1856 2160  864 1201 1204 1250 +hsync +vsync
(**) RADEON(0):  Default mode "1024x768": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"  162.00  1024 1664 1856 2160  768 1201 1204 1250 +hsync +vsync
(**) RADEON(0):  Default mode "1024x768": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"  162.00  1024 1664 1856 2160  768 1201 1204 1250 -hsync -vsync
(**) RADEON(0):  Default mode "1024x768": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768"  162.00  1024 1664 1856 2160  768 1201 1204 1250 -hsync -vsync
(**) RADEON(0):  Default mode "832x624": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "832x624"  162.00  832 1664 1856 2160  624 1201 1204 1250 -hsync -vsync
(**) RADEON(0):  Default mode "800x600": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600"  162.00  800 1664 1856 2160  600 1201 1204 1250 +hsync +vsync
(**) RADEON(0):  Default mode "800x600": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600"  162.00  800 1664 1856 2160  600 1201 1204 1250 +hsync +vsync
(**) RADEON(0):  Default mode "800x600": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600"  162.00  800 1664 1856 2160  600 1201 1204 1250 +hsync +vsync
(**) RADEON(0):  Default mode "800x600": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600"  162.00  800 1664 1856 2160  600 1201 1204 1250 +hsync +vsync
(**) RADEON(0):  Default mode "640x480": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"  162.00  640 1664 1856 2160  480 1201 1204 1250 -hsync -vsync
(**) RADEON(0):  Default mode "640x480": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"  162.00  640 1664 1856 2160  480 1201 1204 1250 -hsync -vsync
(**) RADEON(0):  Default mode "640x480": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480"  162.00  640 1664 1856 2160  480 1201 1204 1250 -hsync -vsync
(--) RADEON(0): Display dimensions: (410, 310) mm
(--) RADEON(0): DPI set to (99, 98)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module already built-in
(**) RADEON(0): Using EXA acceleration architecture
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
	compiled for 1.3.0, module version = 2.1.0
	ABI class: X.Org Video Driver, version 1.2
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
	of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0x88000000 - 0x8800ffff (0x10000) MX[B]
	[1] 0	0	0x80000000 - 0x87ffffff (0x8000000) MX[B]
	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0x98106800 - 0x98106fff (0x800) MX[B]
	[7] -1	0	0x98106000 - 0x981060ff (0x100) MX[B]
	[8] -1	0	0x98105000 - 0x98105fff (0x1000) MX[B]
	[9] -1	0	0x98104000 - 0x98104fff (0x1000) MX[B]
	[10] -1	0	0x98103000 - 0x98103fff (0x1000) MX[B]
	[11] -1	0	0x98102000 - 0x98102fff (0x1000) MX[B]
	[12] -1	0	0x98100000 - 0x9810007f (0x80) MX[B]
	[13] -1	0	0x88010000 - 0x8801ffff (0x10000) MX[B](B)
	[14] -1	0	0x90000000 - 0x90000000 (0x1) MX[B](B)
	[15] -1	0	0x88020000 - 0x8803ffff (0x20000) MX[B](B)
	[16] -1	0	0x88000000 - 0x8800ffff (0x10000) MX[B](B)
	[17] -1	0	0x80000000 - 0x87ffffff (0x8000000) MX[B](B)
	[18] -1	0	0x98101000 - 0x98101fff (0x1000) MX[B](B)
	[19] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[20] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[21] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[22] 0	0	0xfe000400 - 0xfe0004ff (0x100) IX[B]
	[23] -1	0	0x00000400 - 0x000004ff (0x100) IX[B](B)
	[24] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[25] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[26] -1	0	0xfe802420 - 0xfe802427 (0x8) IX[B]
	[27] -1	0	0xfe802400 - 0xfe80241f (0x20) IX[B]
	[28] -1	0	0xfe802300 - 0xfe8023ff (0x100) IX[B]
	[29] -1	0	0xfe802204 - 0xfe802207 (0x4) IX[B]
	[30] -1	0	0xfe802200 - 0xfe802203 (0x4) IX[B]
	[31] -1	0	0xfe802100 - 0xfe8021ff (0x100) IX[B]
	[32] -1	0	0xfe8020a0 - 0xfe8020bf (0x20) IX[B]
	[33] -1	0	0xfe802080 - 0xfe80209f (0x20) IX[B]
	[34] -1	0	0xfe00cc00 - 0xfe00cc0f (0x10) IX[B]
	[35] -1	0	0xfe802000 - 0xfe80207f (0x80) IX[B]
	[36] 0	0	0xfe0003b0 - 0xfe0003bb (0xc) IS[B](OprU)
	[37] 0	0	0xfe0003c0 - 0xfe0003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit 80000000 0
(**) RADEON(0): Map: 0x80000000, 0x08000000
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x10224970)
(**) RADEON(0): Read: 0x0000000c 0x00010090 0x00000000
(**) RADEON(0): Read: rd=12, fd=144, pd=1
(**) RADEON(0): RADEONSaveMode returns 0x10224970
(==) RADEON(0): Using 24 bit depth buffer
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenByBusid: drmOpenMinor returns 5
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.3
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf1031000
(II) RADEON(0): [drm] mapped SAREA 0xf1031000 to 0x48020000
(II) RADEON(0): [drm] framebuffer handle = 0x80000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [pci] 8192 kB allocated with handle 0x00000000
(II) RADEON(0): [pci] ring handle = 0xf2143000
(II) RADEON(0): [pci] Ring mapped at 0x50062000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf2244000
(II) RADEON(0): [pci] Ring read ptr mapped at 0x48022000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf2245000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x50163000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf2445000
(II) RADEON(0): [pci] GART Texture map mapped at 0x50363000
(II) RADEON(0): [drm] register handle = 0x88000000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() : 
(**) RADEON(0):   mem_size         : 0x08000000
(**) RADEON(0):   MC_FB_LOCATION   : 0x87ff8000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1600x1200     162.00  1600 1664 1856 2160  1200 1201 1204 1250 (24,32) +H +V
1600x1200     162.00  1600 1664 1856 2160  1200 1201 1204 1250 (24,32) +H +V
(**) RADEON(0): Pitch = 13107400 bytes (virtualX = 1600, displayWidth = 1600)
(**) RADEON(0): dc=16200, of=32400, fd=144, pd=2
(**) RADEON(0): TMDS_PLL from 1f600f4 to 1f60111
(II) RADEON(0): BIOS HotKeys Disabled
(**) RADEON(0): RADEONInit returns 0x10225320
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x10225320)
(**) RADEON(0): RADEONRestoreMemMapRegisters() : 
(**) RADEON(0):   MC_FB_LOCATION   : 0x87ff8000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x00010090 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=12, fd=144, pd=1
(**) RADEON(0): GRPH_BUFFER_CNTL from 20205c5c to 20185c5c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(==) RADEON(0): Using accelerated EXA DownloadFromScreen hook
(II) RADEON(0): Allocating from a screen of 131072 kb
(II) RADEON(0): Will use 7500 kb for front buffer at offset 0x00000000
(II) RADEON(0): Will use 16 kb for hardware cursor at offset 0x00753000
(II) RADEON(0): Will use 7500 kb for back buffer at offset 0x00757000
(II) RADEON(0): Will use 7500 kb for depth buffer at offset 0x00eaa000
(II) RADEON(0): Will use 54272 kb for textures at offset 0x015fd000
(II) RADEON(0): Will use 54284 kb for X Server offscreen at offset 0x04afd000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1

Backtrace:
0: /usr/bin/X(xf86SigHandler+0x94) [0x100934c4]
1: [0x100374]
2: [0x102272a8]
3: /usr/lib/xorg/modules/extensions//libdri.so(DRIFinishScreenInit+0xb0) [0xf9948b0]
4: /usr/lib/xorg/modules/drivers//radeon_drv.so(RADEONDRIFinishScreenInit+0x68) [0xf8a699c]
5: /usr/lib/xorg/modules/drivers//radeon_drv.so(RADEONScreenInit+0xf74) [0xf895f78]
6: /usr/bin/X(AddScreen+0x21c) [0x1002d79c]
7: /usr/bin/X(InitOutput+0x284) [0x1006d364]
8: /usr/bin/X(main+0x294) [0x1002e004]
9: /lib/libc.so.6 [0xfc75b10]
10: /lib/libc.so.6 [0xfc75cd0]

Fatal server error:
Caught signal 11.  Server aborting

(**) RADEON(0): RADEONLeaveVT
(**) RADEON(0): RADEONRestore
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x10224970)
(**) RADEON(0): RADEONRestoreMemMapRegisters() : 
(**) RADEON(0):   MC_FB_LOCATION   : 0x7fff0000
(**) RADEON(0):   MC_AGP_LOCATION  : 0xffffe000
(**) RADEON(0):   Map Changed ! Applying ...
(**) RADEON(0):   Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): Wrote: 0x0000000c 0x00010090 0x00000000 (0x0000a700)
(**) RADEON(0): Wrote: rd=12, fd=144, pd=1
(**) RADEON(0): Ok, leaving now...

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-01  9:02         ` Tilman Schmidt
  2008-04-06  7:44           ` Dave Airlie
@ 2008-04-07 22:22           ` Tilman Schmidt
  2008-04-07 22:55             ` Ray Lee
  1 sibling, 1 reply; 22+ messages in thread
From: Tilman Schmidt @ 2008-04-07 22:22 UTC (permalink / raw)
  To: Dave Airlie; +Cc: linux-kernel, pavel

[-- Attachment #1: Type: text/plain, Size: 1414 bytes --]

This is still quite elusive. It only happens once every couple of days,
and the only thing that seems to be clear is that it's triggered by a GL
screensaver. So if it's ok I'll continue sharing X crash backtraces
while I go on groping for a lead. Here's my next one, this time with
kernel 2.6.25-rc8:

0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
1: [0xb7f22400]
2:
/usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_set_enable+0x1343)
[0xb50aa673]
3: /usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_Disable+0x5a)
[0xb50abc1a]
4: /usr/lib/xorg/modules//extensions/libglx.so [0xb7ba8b98]
5: /usr/lib/xorg/modules//extensions/libglx.so(DoRender+0xdd) [0xb7ba145d]
6: /usr/lib/xorg/modules//extensions/libglx.so [0xb7ba157c]
7: /usr/lib/xorg/modules//extensions/libglx.so [0xb7ba5a6d]
8: /usr/bin/X [0x815809e]
9: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
10: /usr/bin/X(main+0x47e) [0x807717e]
11: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7cb6fe0]
12: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]

As for Pavel's suggestion of disabling heap randomization, given the
current crash rate I'd have to try that for several weeks before I could
be reasonably sure that it helped. I think it'll be more useful if I go
on looking for a way to reproduce the crash more reliably. Perhaps I
should start playing some GL based games. :-)

Hope this helps (slim chance, I know)
T.


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 254 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-06 14:34             ` Gerhard Pircher
@ 2008-04-07 22:27               ` Dave Airlie
  2008-04-08 21:01                 ` Guennadi Liakhovetski
  0 siblings, 1 reply; 22+ messages in thread
From: Dave Airlie @ 2008-04-07 22:27 UTC (permalink / raw)
  To: Gerhard Pircher; +Cc: linux-kernel

On Mon, Apr 7, 2008 at 12:34 AM, Gerhard Pircher
<gerhard_pircher@gmx.net> wrote:
> -------- Original-Nachricht --------
>  > Datum: Sun, 6 Apr 2008 17:44:25 +1000
>  > Von: "Dave Airlie" <airlied@gmail.com>
>  > An: "Tilman Schmidt" <tilman@imap.cc>
>  > CC: linux-kernel@vger.kernel.org
>  > Betreff: Re: [2.6.25-rc6] possible regression: X server dying
>
>
>  > >  0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
>  > >  1: [0xb7ef7400]
>  > >  2: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7d8e8]
>  > >  3: /usr/lib/xorg/modules//extensions/libglx.so(DoRender+0xdd)
>  > [0xb7b7645d]
>  > >  4: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7657c]
>  > >  5: /usr/lib/xorg/modules//extensions/libglx.so [0xb7b7aa6d]
>  > >  6: /usr/bin/X [0x815809e]
>  > >
>  > >  7: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
>  > >  8: /usr/bin/X(main+0x47e) [0x807717e]
>  > >  9: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7c8bfe0]
>  > >  10: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
>  > >
>  > >  But I know next to nothing about GL, so I'm out of my depth there.
>  > >  I'd welcome any suggestions on how to provoke the crash more
>  > >  regularly so that I could attempt to bisect.
>  >
>  > Its one of the GL screensavers, not sure how to narrow it down, use
>  > ldd to figure out which ones are using GL.
>  >
>  > I've no idea how the kernel is influencing this.
>  >
>  > Dave.
>
>  Sorry for hijacking this thread, but I have a similar problem with the
>  Xorg X server. I'm using kernel 2.6.25-rc8 on my AmigaOne (PowerPC) and
>  the X server dies right on startup, but only if DRI/DRM is enabled.
>  I tested this with both Xorg 7.1 (Debian Etch version) and Xorg 7.2
>  (Lenny). The X server was working fine with kernel 2.6.25-rc6. I have
>  to mention that the AmigaOne uses uncached memory for DMA operations.
>  Benjamin Herrenschmidt fixed DRI recently for non cache coherent systems
>  and his patches are working fine (I applied them to kernel 2.6.25-rc6).
>  Please take a look at the attached Xorg.0.log file or at the excerpt
>  below:

This is not the same problem at all.

So no thread hijacking for you.
.
Dave.

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-07 22:22           ` [2.6.25-rc6] possible regression: X server dying Tilman Schmidt
@ 2008-04-07 22:55             ` Ray Lee
  2008-04-09 11:57               ` Tilman Schmidt
  2008-04-14  1:02               ` Tilman Schmidt
  0 siblings, 2 replies; 22+ messages in thread
From: Ray Lee @ 2008-04-07 22:55 UTC (permalink / raw)
  To: Tilman Schmidt; +Cc: Dave Airlie, linux-kernel, pavel

On Mon, Apr 7, 2008 at 3:22 PM, Tilman Schmidt <tilman@imap.cc> wrote:
> This is still quite elusive. It only happens once every couple of days,
>  and the only thing that seems to be clear is that it's triggered by a GL
>  screensaver. So if it's ok I'll continue sharing X crash backtraces
>  while I go on groping for a lead. Here's my next one, this time with
>  kernel 2.6.25-rc8:
>
>
>  0: /usr/bin/X(xf86SigHandler+0x81) [0x80e6d81]
>  1: [0xb7f22400]
>  2:
>  /usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_set_enable+0x1343)
>  [0xb50aa673]
>  3: /usr/lib/xorg/modules//extensions/libGLcore.so(_mesa_Disable+0x5a)
>  [0xb50abc1a]
>  4: /usr/lib/xorg/modules//extensions/libglx.so [0xb7ba8b98]
>  5: /usr/lib/xorg/modules//extensions/libglx.so(DoRender+0xdd) [0xb7ba145d]
>  6: /usr/lib/xorg/modules//extensions/libglx.so [0xb7ba157c]
>  7: /usr/lib/xorg/modules//extensions/libglx.so [0xb7ba5a6d]
>  8: /usr/bin/X [0x815809e]
>
> 9: /usr/bin/X(Dispatch+0x1af) [0x808f68f]
>  10: /usr/bin/X(main+0x47e) [0x807717e]
>  11: /lib/libc.so.6(__libc_start_main+0xe0) [0xb7cb6fe0]
>  12: /usr/bin/X(FontFileCompleteXLFD+0x1e5) [0x8076501]
>
>  As for Pavel's suggestion of disabling heap randomization, given the
>  current crash rate I'd have to try that for several weeks before I could
>  be reasonably sure that it helped. I think it'll be more useful if I go
>  on looking for a way to reproduce the crash more reliably. Perhaps I
>  should start playing some GL based games. :-)

If you think it's one of the screensavers but don't know which one,
then open up a bash shell and do a

for i in /usr/lib/xscreensaver/*; do echo $i; $i ; done

hitting control-c to break out of the screensaver when you think it's
been cleared of any wrongdoing. They'll default to rendering in a
window rather than the root window, but perhaps that'll be good enough
to hit the bug (it also lets you see the name of the screensaver it
just ran).

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-07 22:27               ` Dave Airlie
@ 2008-04-08 21:01                 ` Guennadi Liakhovetski
  2008-04-09  8:54                   ` Gerhard Pircher
  2008-04-24 16:03                   ` Guennadi Liakhovetski
  0 siblings, 2 replies; 22+ messages in thread
From: Guennadi Liakhovetski @ 2008-04-08 21:01 UTC (permalink / raw)
  To: Dave Airlie; +Cc: Gerhard Pircher, linux-kernel

On Tue, 8 Apr 2008, Dave Airlie wrote:

> On Mon, Apr 7, 2008 at 12:34 AM, Gerhard Pircher <gerhard_pircher@gmx.net> wrote:
> >
> >  Sorry for hijacking this thread, but I have a similar problem with the
> >  Xorg X server. I'm using kernel 2.6.25-rc8 on my AmigaOne (PowerPC) and
> >  the X server dies right on startup, but only if DRI/DRM is enabled.
> >  I tested this with both Xorg 7.1 (Debian Etch version) and Xorg 7.2
> >  (Lenny). The X server was working fine with kernel 2.6.25-rc6. I have
> >  to mention that the AmigaOne uses uncached memory for DMA operations.
> >  Benjamin Herrenschmidt fixed DRI recently for non cache coherent systems
> >  and his patches are working fine (I applied them to kernel 2.6.25-rc6).
> >  Please take a look at the attached Xorg.0.log file or at the excerpt
> >  below:

Hm, so looks like I'm not seeing some ghosts on mine either. 2.6.25-rc8 
xorg runs under etch, but enters a tight (no syscalls) loop woth 100% CPU 
load under lenny. A 2.6.24 based kernel works under both etch and lenny... 
Haven't had time to try to localize the problem. Glint xorg driver, DRM 
and AGP are off, CONFIG_FB_PM2=y.

Thanks
Guennadi
---
Guennadi Liakhovetski

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-08 21:01                 ` Guennadi Liakhovetski
@ 2008-04-09  8:54                   ` Gerhard Pircher
  2008-04-24 16:40                     ` Oliver Pinter
  2008-04-24 16:03                   ` Guennadi Liakhovetski
  1 sibling, 1 reply; 22+ messages in thread
From: Gerhard Pircher @ 2008-04-09  8:54 UTC (permalink / raw)
  To: Guennadi Liakhovetski, airlied; +Cc: linux-kernel


-------- Original-Nachricht --------
> Datum: Tue, 8 Apr 2008 23:01:26 +0200 (CEST)
> Von: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> An: Dave Airlie <airlied@gmail.com>
> CC: Gerhard Pircher <gerhard_pircher@gmx.net>, linux-kernel@vger.kernel.org
> Betreff: Re: [2.6.25-rc6] possible regression: X server dying

> On Tue, 8 Apr 2008, Dave Airlie wrote:
> 
> > On Mon, Apr 7, 2008 at 12:34 AM, Gerhard Pircher
> <gerhard_pircher@gmx.net> wrote:
> > >
> > >  Sorry for hijacking this thread, but I have a similar problem with
> > >  the Xorg X server. I'm using kernel 2.6.25-rc8 on my AmigaOne
> > >  (PowerPC) and the X server dies right on startup, but only if
> > >  DRI/DRM is enabled. I tested this with both Xorg 7.1 (Debian Etch
> > >  version) and Xorg 7.2 (Lenny). The X server was working fine with
> > >  kernel 2.6.25-rc6. I have to mention that the AmigaOne uses uncached 
> > >  memory for DMA operations. Benjamin Herrenschmidt fixed DRI recently
> > >  for non cache coherent systems and his patches are working fine (I
> > >  applied them to kernel 2.6.25-rc6).
> > >  Please take a look at the attached Xorg.0.log file or at the excerpt
> > >  below:
> 
> Hm, so looks like I'm not seeing some ghosts on mine either. 2.6.25-rc8
> xorg runs under etch, but enters a tight (no syscalls) loop woth 100% CPU 
> load under lenny. A 2.6.24 based kernel works under both etch and
> lenny...
Strange! I guess I should recompile the kernel and test again. :(
I also experienced a high load under Lenny, but IIRC this showed up under
an older kernel (2.6.18), too (after X server is started, standard
installation, no additional packages).

> Haven't had time to try to localize the problem. Glint xorg driver, DRM 
> and AGP are off, CONFIG_FB_PM2=y.
The X server only dies on my machine, if DRM is on. I read somewhere that
the lastest DRM patches need a newer Xorg version (~7.3). Could that be
the problem with kernel 2.6.25-rc8?

Thanks!

Gerhard
-- 
Psssst! Schon vom neuen GMX MultiMessenger gehört?
Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-07 22:55             ` Ray Lee
@ 2008-04-09 11:57               ` Tilman Schmidt
  2008-04-14  1:02               ` Tilman Schmidt
  1 sibling, 0 replies; 22+ messages in thread
From: Tilman Schmidt @ 2008-04-09 11:57 UTC (permalink / raw)
  To: Ray Lee; +Cc: Dave Airlie, linux-kernel, pavel

[-- Attachment #1: Type: text/plain, Size: 1116 bytes --]

Ray Lee schrieb:
> If you think it's one of the screensavers but don't know which one,
> then open up a bash shell and do a
> 
> for i in /usr/lib/xscreensaver/*; do echo $i; $i ; done
> 
> hitting control-c to break out of the screensaver when you think it's
> been cleared of any wrongdoing.

Good idea. I did one pass through the screensavers that way, letting
each one run a couple of seconds until it seemed to become repetitive.
None of this crashed my X server, which at least seems to tell me that
it is not one particular screensaver always triggering the problem.

But: twice during that test I was called away, left the thing running,
and came back to find the X server had exited again, apparently after
the "real" screensaver had kicked in. Twice in a day, that's much more
than ever before. So you may have found me a way to trigger the crash
with greater probability.

Thanks,
T.

-- 
Tilman Schmidt                    E-Mail: tilman@imap.cc
Bonn, Germany
Diese Nachricht besteht zu 100% aus wiederverwerteten Bits.
Ungeöffnet mindestens haltbar bis: (siehe Rückseite)


[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 250 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-07 22:55             ` Ray Lee
  2008-04-09 11:57               ` Tilman Schmidt
@ 2008-04-14  1:02               ` Tilman Schmidt
  1 sibling, 0 replies; 22+ messages in thread
From: Tilman Schmidt @ 2008-04-14  1:02 UTC (permalink / raw)
  To: Ray Lee; +Cc: Rafael J. Wysocki, Dave Airlie, linux-kernel, pavel

[-- Attachment #1: Type: text/plain, Size: 771 bytes --]

On Mon, Apr 7, 2008 at 3:22 PM, Tilman Schmidt <tilman@imap.cc> wrote:
>> This is still quite elusive. It only happens once every couple of days,
>>  and the only thing that seems to be clear is that it's triggered by a GL
>>  screensaver.

Ok, I think I can now reproduce it, and it does not, in fact, appear
to be kernel related. Specifically, doing:

% /usr/lib/xscreensaver/antspotlight & /usr/lib/xscreensaver/atlantis

in a console window (ie. running *two* GL screensavers in parallel)
reliably kills my X server on kernels 2.6.22.17, 2.6.24.4 and 2.6.25-rc9,
with a backtrace much like the ones I posted. So it seems to be an X server
problem that I just happened to encounter for the first time while trying
out 2.6.25-rc6.

Thanks,
Tilman



[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 253 bytes --]

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [2.6.25] X server dying due to lock not being held
  2008-04-06  7:44           ` Dave Airlie
  2008-04-06 14:34             ` Gerhard Pircher
@ 2008-04-19 11:30             ` Gerhard Pircher
  1 sibling, 0 replies; 22+ messages in thread
From: Gerhard Pircher @ 2008-04-19 11:30 UTC (permalink / raw)
  To: linux-kernel

Hi,

I'm running kernel 2.6.25 here on my AmigaOne G4 PowerPC machine and the
Xorg server dies since version 2.6.25-rc8, if DRI is enabled. I'm using a
Radeon9200 in PCIGART mode. The test was performed on a Debian Lenny
system.

The kernel log says the following:
> Apr 18 22:43:51 amigaone kernel: [drm:radeon_cp_init] *ERROR* radeon_cp_init called without lock held, held  0 owner 00000000 ef26a180
> Apr 18 22:43:51 amigaone kernel: [drm:drm_unlock] *ERROR* Process 2020 using kernel context 0

The Xorg.0.log contains the following stacktrace:
> (**) RADEON(0): RADEONScreenInit 80000000 0
> (**) RADEON(0): Map: 0x80000000, 0x08000000
> (**) RADEON(0): RADEONSave
> (**) RADEON(0): RADEONSaveMode(0x102246f8)
> (**) RADEON(0): Read: 0x0000000c 0x00010090 0x00000000
> (**) RADEON(0): Read: rd=12, fd=144, pd=1
> (**) RADEON(0): RADEONSaveMode returns 0x102246f8
> (==) RADEON(0): Using 24 bit depth buffer
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 5, (OK)
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 5, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:01:00.0
> drmOpenDevice: node name is /dev/dri/card0
> drmOpenDevice: open result is 5, (OK)
> drmOpenByBusid: drmOpenMinor returns 5
> drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
> (II) RADEON(0): [drm] DRM interface version 1.3
> (II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01:00.0"
> (II) RADEON(0): [drm] added 8192 byte SAREA at 0xf1031000
> (II) RADEON(0): [drm] mapped SAREA 0xf1031000 to 0x48020000
> (II) RADEON(0): [drm] framebuffer handle = 0x80000000
> (II) RADEON(0): [drm] added 1 reserved context for kernel
> (II) RADEON(0): [pci] 8192 kB allocated with handle 0x00000000
> (II) RADEON(0): [pci] ring handle = 0xf2143000
> (II) RADEON(0): [pci] Ring mapped at 0x50063000
> (II) RADEON(0): [pci] Ring contents 0x00000000
> (II) RADEON(0): [pci] ring read ptr handle = 0xf2244000
> (II) RADEON(0): [pci] Ring read ptr mapped at 0x48022000
> (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
> (II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf2245000
> (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x50164000
> (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
> (II) RADEON(0): [pci] GART texture map handle = 0xf2445000
> (II) RADEON(0): [pci] GART Texture map mapped at 0x50364000
> (II) RADEON(0): [drm] register handle = 0x88000000
> (II) RADEON(0): [dri] Visual configs initialized
> (**) RADEON(0): DRI New memory map param
> (**) RADEON(0): RADEONInitMemoryMap() : 
> (**) RADEON(0):   mem_size         : 0x08000000
> (**) RADEON(0):   MC_FB_LOCATION   : 0x87ff8000
> (**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
> (**) RADEON(0): RADEONModeInit()
> 1600x1200     162.00  1600 1664 1856 2160  1200 1201 1204 1250 (24,32) +H +V
> 1600x1200     162.00  1600 1664 1856 2160  1200 1201 1204 1250 (24,32) +H +V
> (**) RADEON(0): Pitch = 13107400 bytes (virtualX = 1600, displayWidth = 1600)
> (**) RADEON(0): dc=16200, of=32400, fd=144, pd=2
> (**) RADEON(0): TMDS_PLL from 1f600f4 to 1f60111
> (II) RADEON(0): BIOS HotKeys Disabled
> (**) RADEON(0): RADEONInit returns 0x102250a8
> (**) RADEON(0): RADEONRestoreMode()
> (**) RADEON(0): RADEONRestoreMode(0x102250a8)
> (**) RADEON(0): RADEONRestoreMemMapRegisters() : 
> (**) RADEON(0):   MC_FB_LOCATION   : 0x87ff8000
> (**) RADEON(0):   MC_AGP_LOCATION  : 0xffffffc0
> (**) RADEON(0):   Map Changed ! Applying ...
> (**) RADEON(0):   Map applied, resetting engine ...
> (**) RADEON(0): Updating display base addresses...
> (**) RADEON(0): Memory map updated.
> (**) RADEON(0): Programming CRTC1, offset: 0x00000000
> (**) RADEON(0): Wrote: 0x0000000c 0x00010090 0x00000000 (0x0000a700)
> (**) RADEON(0): Wrote: rd=12, fd=144, pd=1
> (**) RADEON(0): GRPH_BUFFER_CNTL from 20205c5c to 20185c5c
> (**) RADEON(0): RADEONSaveScreen(0)
> (II) RADEON(0): Depth moves disabled by default
> (**) RADEON(0): Setting up initial surfaces
> (**) RADEON(0): Initializing fb layer
> (**) RADEON(0): Setting up accel memmap
> (==) RADEON(0): Using accelerated EXA DownloadFromScreen hook
> (II) RADEON(0): Allocating from a screen of 131072 kb
> (II) RADEON(0): Will use 7500 kb for front buffer at offset 0x00000000
> (II) RADEON(0): Will use 16 kb for hardware cursor at offset 0x00753000
> (II) RADEON(0): Will use 7500 kb for back buffer at offset 0x00757000
> (II) RADEON(0): Will use 7500 kb for depth buffer at offset 0x00eaa000
> (II) RADEON(0): Will use 54272 kb for textures at offset 0x015fd000
> (II) RADEON(0): Will use 54284 kb for X Server offscreen at offset 0x04afd000
> (**) RADEON(0): Initializing backing store
> (==) RADEON(0): Backing store disabled
> (**) RADEON(0): DRI Finishing init !
> (II) RADEON(0): X context handle = 0x1
> 
> Backtrace:
> 0: /usr/bin/X(xf86SigHandler+0x94) [0x100934c4]
> 1: [0x100374]
> 2: [0x10227030]
> 3: /usr/lib/xorg/modules/extensions//libdri.so(DRIFinishScreenInit+0xb0) [0xf98a8b0]
> 4: /usr/lib/xorg/modules/drivers//radeon_drv.so(RADEONDRIFinishScreenInit+0x68) [0xf89c99c]
> 5: /usr/lib/xorg/modules/drivers//radeon_drv.so(RADEONScreenInit+0xf74) [0xf88bf78]
> 6: /usr/bin/X(AddScreen+0x21c) [0x1002d79c]
> 7: /usr/bin/X(InitOutput+0x284) [0x1006d364]
> 8: /usr/bin/X(main+0x294) [0x1002e004]
> 9: /lib/libc.so.6 [0xfc6b720]
> 10: /lib/libc.so.6 [0xfc6b8e0]
> 
> Fatal server error:
> Caught signal 11.  Server aborting
> 
> (**) RADEON(0): RADEONLeaveVT
> (**) RADEON(0): RADEONRestore
> (**) RADEON(0): RADEONRestoreMode()
> (**) RADEON(0): RADEONRestoreMode(0x102246f8)
> (**) RADEON(0): RADEONRestoreMemMapRegisters() : 
> (**) RADEON(0):   MC_FB_LOCATION   : 0x7fff0000
> (**) RADEON(0):   MC_AGP_LOCATION  : 0xffffe000
> (**) RADEON(0):   Map Changed ! Applying ...
> (**) RADEON(0):   Map applied, resetting engine ...
> (**) RADEON(0): Updating display base addresses...
> (**) RADEON(0): Memory map updated.
> (**) RADEON(0): Programming CRTC1, offset: 0x00000000
> (**) RADEON(0): Wrote: 0x0000000c 0x00010090 0x00000000 (0x0000a700)
> (**) RADEON(0): Wrote: rd=12, fd=144, pd=1
> (**) RADEON(0): Ok, leaving now...

Any ideas what could be wrong here?

Thanks!

regards,

Gerhard

BTW: Please put me on CC:!
-- 
Psst! Geheimtipp: Online Games kostenlos spielen bei den GMX Free Games! 
http://games.entertainment.gmx.net/de/entertainment/games/free

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-08 21:01                 ` Guennadi Liakhovetski
  2008-04-09  8:54                   ` Gerhard Pircher
@ 2008-04-24 16:03                   ` Guennadi Liakhovetski
  1 sibling, 0 replies; 22+ messages in thread
From: Guennadi Liakhovetski @ 2008-04-24 16:03 UTC (permalink / raw)
  To: Dave Airlie; +Cc: Gerhard Pircher, linux-kernel, adaplas, linux-fbdev-devel

On Tue, 8 Apr 2008, Guennadi Liakhovetski wrote:

> Hm, so looks like I'm not seeing some ghosts on mine either. 2.6.25-rc8 
> xorg runs under etch, but enters a tight (no syscalls) loop woth 100% CPU 
> load under lenny. A 2.6.24 based kernel works under both etch and lenny... 
> Haven't had time to try to localize the problem. Glint xorg driver, DRM 
> and AGP are off, CONFIG_FB_PM2=y.

Ok, here's more info. It DOES seem to be a regression. I spent half a day 
yesterday trying to trace this down, with no success. Multiple bisect 
attempts ended up with non-bootable kernels on the very first iteration. 
Today I just wanted to post all possible logs / configs to Bugzilla and - 
it "suddenly" worked... And the change that made it work was - I disabled 
CONFIG_FB_PM2 in the kernel...

So, I think, this shall be qualified as a regression, although, I have no 
idea where. pm2fb.c itself hasn't (effectively for little endian) changed 
since 2.6.24. To make it visual

		etch		lenny

v2.6.24		works		works
v2.6.25		works		fails

/me thinks he should trade his ap400 to the Linux Kernel Testers Inc. for 
LOTS of money.

Thanks
Guennadi
---
Guennadi Liakhovetski

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-09  8:54                   ` Gerhard Pircher
@ 2008-04-24 16:40                     ` Oliver Pinter
  2008-04-24 20:37                       ` Gerhard Pircher
  0 siblings, 1 reply; 22+ messages in thread
From: Oliver Pinter @ 2008-04-24 16:40 UTC (permalink / raw)
  To: Gerhard Pircher; +Cc: Guennadi Liakhovetski, airlied, linux-kernel

On 4/9/08, Gerhard Pircher <gerhard_pircher@gmx.net> wrote:
>
> -------- Original-Nachricht --------
> > Datum: Tue, 8 Apr 2008 23:01:26 +0200 (CEST)
> > Von: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > An: Dave Airlie <airlied@gmail.com>
> > CC: Gerhard Pircher <gerhard_pircher@gmx.net>,
> linux-kernel@vger.kernel.org
> > Betreff: Re: [2.6.25-rc6] possible regression: X server dying
>
> > On Tue, 8 Apr 2008, Dave Airlie wrote:
> >
> > > On Mon, Apr 7, 2008 at 12:34 AM, Gerhard Pircher
> > <gerhard_pircher@gmx.net> wrote:
> > > >
> > > >  Sorry for hijacking this thread, but I have a similar problem with
> > > >  the Xorg X server. I'm using kernel 2.6.25-rc8 on my AmigaOne
> > > >  (PowerPC) and the X server dies right on startup, but only if
> > > >  DRI/DRM is enabled. I tested this with both Xorg 7.1 (Debian Etch
> > > >  version) and Xorg 7.2 (Lenny). The X server was working fine with
> > > >  kernel 2.6.25-rc6. I have to mention that the AmigaOne uses uncached
> > > >  memory for DMA operations. Benjamin Herrenschmidt fixed DRI recently
> > > >  for non cache coherent systems and his patches are working fine (I
> > > >  applied them to kernel 2.6.25-rc6).
> > > >  Please take a look at the attached Xorg.0.log file or at the excerpt
> > > >  below:
> >
> > Hm, so looks like I'm not seeing some ghosts on mine either. 2.6.25-rc8
> > xorg runs under etch, but enters a tight (no syscalls) loop woth 100% CPU
> > load under lenny. A 2.6.24 based kernel works under both etch and
> > lenny...
> Strange! I guess I should recompile the kernel and test again. :(
> I also experienced a high load under Lenny, but IIRC this showed up under
> an older kernel (2.6.18), too (after X server is started, standard
> installation, no additional packages).

i have too this problem, the Xserver is dieing, but undependent from
kernel version, i think it is a xserver problem

Package: xserver-xorg-video-ati
Priority: optional
Section: x11
Installed-Size: 880
<>
Architecture: i386
Version: 1:6.6.3-2

under etch and 2.6.22.22 and 2.6.24.y kernel is ok
under lenny and 2.6.22.22 or 2.6.24.y or 2.6.25, in first start the
xserver crashed

>
> > Haven't had time to try to localize the problem. Glint xorg driver, DRM
> > and AGP are off, CONFIG_FB_PM2=y.
> The X server only dies on my machine, if DRM is on. I read somewhere that
> the lastest DRM patches need a newer Xorg version (~7.3). Could that be
> the problem with kernel 2.6.25-rc8?
>
> Thanks!
>
> Gerhard
> --
> Psssst! Schon vom neuen GMX MultiMessenger gehört?
> Der kann`s mit allen: http://www.gmx.net/de/go/multimessenger
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/
>


-- 
Thanks,
Oliver

^ permalink raw reply	[flat|nested] 22+ messages in thread

* Re: [2.6.25-rc6] possible regression: X server dying
  2008-04-24 16:40                     ` Oliver Pinter
@ 2008-04-24 20:37                       ` Gerhard Pircher
  0 siblings, 0 replies; 22+ messages in thread
From: Gerhard Pircher @ 2008-04-24 20:37 UTC (permalink / raw)
  To: Oliver Pinter; +Cc: linux-kernel, airlied, g.liakhovetski

[-- Attachment #1: Type: text/plain, Size: 3197 bytes --]

-------- Original-Nachricht --------
> Datum: Thu, 24 Apr 2008 18:40:02 +0200
> Von: "Oliver Pinter" <oliver.pntr@gmail.com>
> An: "Gerhard Pircher" <gerhard_pircher@gmx.net>
> CC: "Guennadi Liakhovetski" <g.liakhovetski@gmx.de>, airlied@gmail.com,
> linux-kernel@vger.kernel.org
> Betreff: Re: [2.6.25-rc6] possible regression: X server dying

> On 4/9/08, Gerhard Pircher <gerhard_pircher@gmx.net> wrote:
> >
> > -------- Original-Nachricht --------
> > > Datum: Tue, 8 Apr 2008 23:01:26 +0200 (CEST)
> > > Von: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> > > An: Dave Airlie <airlied@gmail.com>
> > > CC: Gerhard Pircher <gerhard_pircher@gmx.net>,
> > > linux-kernel@vger.kernel.org
> > > Betreff: Re: [2.6.25-rc6] possible regression: X server dying
> >
> > > On Tue, 8 Apr 2008, Dave Airlie wrote:
> > >
> > > > On Mon, Apr 7, 2008 at 12:34 AM, Gerhard Pircher
> > > > <gerhard_pircher@gmx.net> wrote:
> > > > >
> > > > >  Sorry for hijacking this thread, but I have a similar problem
> > > > >  with the Xorg X server. I'm using kernel 2.6.25-rc8 on my
> > > > >  AmigaOne (PowerPC) and the X server dies right on startup, but
> > > > >  only if DRI/DRM is enabled. I tested this with both Xorg 7.1
> > > > >  (Debian Etch version) and Xorg 7.2 (Lenny). The X server was
> > > > >  working fine with kernel 2.6.25-rc6. I have to mention that the
> > > > >  AmigaOne uses uncached memory for DMA operations. Benjamin
> > > > >  Herrenschmidt fixed DRI recently for non cache coherent systems
> > > > >  and his patches are working fine (I applied them to kernel
> > > > >  2.6.25-rc6).
> > > > >  Please take a look at the attached Xorg.0.log file or at the
> > > > >  excerpt below:
> > >
> > > Hm, so looks like I'm not seeing some ghosts on mine either.
> > > 2.6.25-rc8 xorg runs under etch, but enters a tight (no syscalls)
> > > loop woth 100% CPU load under lenny. A 2.6.24 based kernel works
> > > under both etch and lenny...
> > Strange! I guess I should recompile the kernel and test again. :(
> > I also experienced a high load under Lenny, but IIRC this showed up
> > under an older kernel (2.6.18), too (after X server is started,
> > standard installation, no additional packages).
> 
> i have too this problem, the Xserver is dieing, but undependent from
> kernel version, i think it is a xserver problem
> 
> Package: xserver-xorg-video-ati
> Priority: optional
> Section: x11
> Installed-Size: 880
> <>
> Architecture: i386
> Version: 1:6.6.3-2
> 
> under etch and 2.6.22.22 and 2.6.24.y kernel is ok
> under lenny and 2.6.22.22 or 2.6.24.y or 2.6.25, in first start the
> xserver crashed
It looks like one of these patches fixes the crash of the X server on my
machine (applied on v2.6.25 release):
http://lkml.org/lkml/2008/4/19/244
http://lkml.org/lkml/2008/4/19/243

Also system load seems to be lower. The only problem is that the X server
heavily crashes on shutdown (resp. when executing /etc/init.d/gdm stop)
now. Even the console gets corrupted. I attached the kernel log file that
shows the kernel oopses.

regards,

Gerhard
-- 
GMX startet ShortView.de. Hier findest Du Leute mit Deinen Interessen!
Jetzt dabei sein: http://www.shortview.de/?mc=sv_ext_mf@gmx

[-- Attachment #2: xorg_crash.log --]
[-- Type: text/x-log, Size: 73430 bytes --]

 -> early_init_devtree(c0bef300)
search "chosen", depth: 0, uname: 
search "chosen", depth: 1, uname: cpus
search "chosen", depth: 2, uname: cpu@0
search "chosen", depth: 1, uname: memory
search "chosen", depth: 1, uname: pci@80000000
search "chosen", depth: 2, uname: host@0
search "chosen", depth: 2, uname: isa@7
search "chosen", depth: 3, uname: dma-controller@0
search "chosen", depth: 3, uname: interrupt-controller@20
search "chosen", depth: 3, uname: timer@40
search "chosen", depth: 3, uname: 8042@60
search "chosen", depth: 4, uname: keyboard@0
search "chosen", depth: 4, uname: mouse@1
search "chosen", depth: 3, uname: rtc@70
search "chosen", depth: 3, uname: serial@3f8
search "chosen", depth: 3, uname: serial@2f8
search "chosen", depth: 3, uname: parallel@378
search "chosen", depth: 3, uname: fdc@3f0
search "chosen", depth: 4, uname: disk@0
search "chosen", depth: 2, uname: ide@7,1
search "chosen", depth: 1, uname: chosen
Looking for initrd properties... <3>initrd_start=0x0  initrd_end=0x0
Command line is: initcall_debug driver_debug debug root=/dev/hda12 console=tty0 ide0=ata66 ide1=ata66
dt_root_size_cells = 1
dt_root_addr_cells = 1
memory scan node memory, reg size 8, data: 0 60000000 2 1,
 - 0 ,  60000000
Phys. mem: 60000000
-> move_device_tree
<- move_device_tree
Scanning CPUs ...
boot cpu: logical 0 physical 0
 <- early_init_devtree()
Using AmigaOne machine description
Total memory = 1536MB; using 4096kB for hash table (at cfc00000)
Linux version 2.6.25 (geri@earth) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #99 Thu Apr 24 20:26:20 CEST 2008
 -> unflatten_device_tree()
  size is 10c4, allocating...
  unflattening efffef38...
fixed up name for  -> 
fixed up name for cpus -> cpus
fixed up name for cpu@0 -> cpu
fixed up name for memory -> memory
fixed up name for pci@80000000 -> pci
fixed up name for host@0 -> host
fixed up name for isa@7 -> isa
fixed up name for dma-controller@0 -> dma-controller
fixed up name for interrupt-controller@20 -> interrupt-controller
fixed up name for timer@40 -> timer
fixed up name for 8042@60 -> 8042
fixed up name for keyboard@0 -> keyboard
fixed up name for mouse@1 -> mouse
fixed up name for rtc@70 -> rtc
fixed up name for serial@3f8 -> serial
fixed up name for serial@2f8 -> serial
fixed up name for parallel@378 -> parallel
fixed up name for fdc@3f0 -> fdc
fixed up name for disk@0 -> disk
fixed up name for ide@7,1 -> ide
fixed up name for chosen -> chosen
 <- unflatten_device_tree()
 -> find_legacy_serial_port()
stdout is /pci@80000000/isa@7/serial@3f8
 -> add_legacy_isa_port(/pci@80000000/isa@7/serial@3f8)
OF: ** translation for device /pci@80000000/isa@7/serial@3f8 **
OF: bus is isa (na=2, ns=1) on /pci@80000000/isa@7
OF: translating address: 00000001 000003f8
OF: parent bus is pci (na=3, ns=2) on /pci@80000000
OF: walking ranges...
OF: ISA map, cp=0, s=10000, da=3f8
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 3f8
OF: one level translation: 01000000 00000000 000003f8
OF: parent bus is default (na=1, ns=1) on /
OF: walking ranges...
OF: PCI map, cp=0, s=c00000, da=3f8
OF: parent translation for: fe000000
OF: with offset: 3f8
OF: one level translation: fe0003f8
OF: reached root node
Found legacy serial port 0 for /pci@80000000/isa@7/serial@3f8
  port=3f8, taddr=fe0003f8, irq=0, clk=1843200, speed=115200
 -> add_legacy_isa_port(/pci@80000000/isa@7/serial@2f8)
OF: ** translation for device /pci@80000000/isa@7/serial@2f8 **
OF: bus is isa (na=2, ns=1) on /pci@80000000/isa@7
OF: translating address: 00000001 000002f8
OF: parent bus is pci (na=3, ns=2) on /pci@80000000
OF: walking ranges...
OF: ISA map, cp=0, s=10000, da=2f8
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 2f8
OF: one level translation: 01000000 00000000 000002f8
OF: parent bus is default (na=1, ns=1) on /
OF: walking ranges...
OF: PCI map, cp=0, s=c00000, da=2f8
OF: parent translation for: fe000000
OF: with offset: 2f8
OF: one level translation: fe0002f8
OF: reached root node
Found legacy serial port 1 for /pci@80000000/isa@7/serial@2f8
  port=2f8, taddr=fe0002f8, irq=0, clk=1843200, speed=115200
legacy_serial_console = 0
default console speed = 115200
 <- find_legacy_serial_port()
console [udbg0] enabled
Entering add_active_range(0, 0, 393216) 0 entries of 256 used
AmigaOne l2cr : L2 cache was not active, activating.
PCI bus 0 controlled by /pci@80000000
PCI host bridge /pci@80000000 (primary) ranges:
OF: ** translation for device /pci@80000000 **
OF: bus is default (na=1, ns=1) on /
OF: translating address: fe000000
OF: reached root node
  IO 0x00000000fe000000..0x00000000febfffff -> 0x0000000000000000
OF: ** translation for device /pci@80000000 **
OF: bus is default (na=1, ns=1) on /
OF: translating address: 80000000
OF: reached root node
OF: ** translation for device /pci@80000000 **
OF: bus is default (na=1, ns=1) on /
OF: translating address: fd000000
OF: reached root node
 MEM 0x0000000080000000..0x00000000fcffffff -> 0x0000000080000000 
OF: ** translation for device /pci@80000000 **
OF: bus is default (na=1, ns=1) on /
OF: translating address: fd000000
OF: reached root node
 MEM 0x00000000fd000000..0x00000000fdffffff -> 0x0000000000000000 
Top of RAM: 0x60000000, Total RAM: 0x60000000
Memory hole size: 0MB
Zone PFN ranges:
  DMA             0 ->   196608
  Normal     196608 ->   196608
  HighMem    196608 ->   393216
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   393216
On node 0 totalpages: 393216
  DMA zone: 1536 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 195072 pages, LIFO batch:31
  Normal zone: 0 pages used for memmap
  HighMem zone: 1536 pages used for memmap
  HighMem zone: 195072 pages, LIFO batch:31
  Movable zone: 0 pages used for memmap
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 390144
Kernel command line: initcall_debug driver_debug debug root=/dev/hda12 console=tty0 ide0=ata66 ide1=ata66
ide_setup: ide0=ata66 -- OBSOLETE OPTION, WILL BE REMOVED SOON!
ide_setup: ide1=ata66 -- OBSOLETE OPTION, WILL BE REMOVED SOON!
irq: Allocated host of type 0 @0xc040f180
i8259 legacy interrupt controller initialized
irq: Default host set to @0xc040f180
PID hash table entries: 4096 (order: 12, 16384 bytes)
time_init: decrementer frequency = 33.333333 MHz
time_init: processor frequency   = 933.333376 MHz
clocksource: timebase mult[7800001] shift[22] registered
clockevent: decrementer mult[888] shift[16] cpu[0]
 -> check_legacy_serial_console()
 console was specified !
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
High memory: 786432k
Memory: 1550204k/1572864k available (3648k kernel code, 21608k reserved, 144k data, 295k bss, 172k init)
SLUB: Genslabs=10, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay loop... 66.56 BogoMIPS (lpj=133120)
Mount-cache hash table entries: 512
Calling initcall 0xc0381270: init_cpufreq_transition_notifier_list+0x0/0x2c()
initcall 0xc0381270: init_cpufreq_transition_notifier_list+0x0/0x2c() returned 0.
initcall 0xc0381270 ran for 0 msecs: init_cpufreq_transition_notifier_list+0x0/0x2c()
Calling initcall 0xc03814a0: net_ns_init+0x0/0x188()
net_namespace: 540 bytes
initcall 0xc03814a0: net_ns_init+0x0/0x188() returned 0.
initcall 0xc03814a0 ran for 0 msecs: net_ns_init+0x0/0x188()
Calling initcall 0xc0372904: dma_alloc_init+0x0/0xac()
initcall 0xc0372904: dma_alloc_init+0x0/0xac() returned 0.
initcall 0xc0372904 ran for 0 msecs: dma_alloc_init+0x0/0xac()
Calling initcall 0xc0373a20: sysctl_init+0x0/0x48()
initcall 0xc0373a20: sysctl_init+0x0/0x48() returned 0.
initcall 0xc0373a20 ran for 0 msecs: sysctl_init+0x0/0x48()
Calling initcall 0xc03743fc: ksysfs_init+0x0/0xec()
initcall 0xc03743fc: ksysfs_init+0x0/0xec() returned 0.
initcall 0xc03743fc ran for 0 msecs: ksysfs_init+0x0/0xec()
Calling initcall 0xc03748c0: init_jiffies_clocksource+0x0/0x28()
initcall 0xc03748c0: init_jiffies_clocksource+0x0/0x28() returned 0.
initcall 0xc03748c0 ran for 0 msecs: init_jiffies_clocksource+0x0/0x28()
Calling initcall 0xc0374b2c: pm_init+0x0/0x54()
initcall 0xc0374b2c: pm_init+0x0/0x54() returned 0.
initcall 0xc0374b2c ran for 0 msecs: pm_init+0x0/0x54()
Calling initcall 0xc0377584: filelock_init+0x0/0x48()
initcall 0xc0377584: filelock_init+0x0/0x48() returned 0.
initcall 0xc0377584 ran for 0 msecs: filelock_init+0x0/0x48()
Calling initcall 0xc0378144: init_script_binfmt+0x0/0x28()
initcall 0xc0378144: init_script_binfmt+0x0/0x28() returned 0.
initcall 0xc0378144 ran for 0 msecs: init_script_binfmt+0x0/0x28()
Calling initcall 0xc037816c: init_elf_binfmt+0x0/0x28()
initcall 0xc037816c: init_elf_binfmt+0x0/0x28() returned 0.
initcall 0xc037816c ran for 0 msecs: init_elf_binfmt+0x0/0x28()
Calling initcall 0xc0378e88: debugfs_init+0x0/0x70()
initcall 0xc0378e88: debugfs_init+0x0/0x70() returned 0.
initcall 0xc0378e88 ran for 0 msecs: debugfs_init+0x0/0x70()
Calling initcall 0xc0379abc: random32_init+0x0/0x34()
initcall 0xc0379abc: random32_init+0x0/0x34() returned 0.
initcall 0xc0379abc ran for 0 msecs: random32_init+0x0/0x34()
Calling initcall 0xc0381240: cpufreq_core_init+0x0/0x30()
initcall 0xc0381240: cpufreq_core_init+0x0/0x30() returned 0.
initcall 0xc0381240 ran for 0 msecs: cpufreq_core_init+0x0/0x30()
Calling initcall 0xc0381300: sock_init+0x0/0x84()
initcall 0xc0381300: sock_init+0x0/0x84() returned 0.
initcall 0xc0381300 ran for 0 msecs: sock_init+0x0/0x84()
Calling initcall 0xc0381ec0: netpoll_init+0x0/0x20()
initcall 0xc0381ec0: netpoll_init+0x0/0x20() returned 0.
initcall 0xc0381ec0 ran for 0 msecs: netpoll_init+0x0/0x20()
Calling initcall 0xc03821f8: netlink_proto_init+0x0/0x158()
NET: Registered protocol family 16
initcall 0xc03821f8: netlink_proto_init+0x0/0x158() returned 0.
initcall 0xc03821f8 ran for 0 msecs: netlink_proto_init+0x0/0x158()
Calling initcall 0xc036be84: of_bus_driver_init+0x0/0x30()
initcall 0xc036be84: of_bus_driver_init+0x0/0x30() returned 0.
initcall 0xc036be84 ran for 0 msecs: of_bus_driver_init+0x0/0x30()
Calling initcall 0xc0379958: kobject_uevent_init+0x0/0x68()
initcall 0xc0379958: kobject_uevent_init+0x0/0x68() returned 0.
initcall 0xc0379958 ran for 0 msecs: kobject_uevent_init+0x0/0x68()
Calling initcall 0xc0379b2c: pcibus_class_init+0x0/0x28()
initcall 0xc0379b2c: pcibus_class_init+0x0/0x28() returned 0.
initcall 0xc0379b2c ran for 0 msecs: pcibus_class_init+0x0/0x28()
Calling initcall 0xc037a1c0: pci_driver_init+0x0/0x28()
initcall 0xc037a1c0: pci_driver_init+0x0/0x28() returned 0.
initcall 0xc037a1c0 ran for 0 msecs: pci_driver_init+0x0/0x28()
Calling initcall 0xc037aae0: backlight_class_init+0x0/0x74()
initcall 0xc037aae0: backlight_class_init+0x0/0x74() returned 0.
initcall 0xc037aae0 ran for 0 msecs: backlight_class_init+0x0/0x74()
Calling initcall 0xc037b104: tty_class_init+0x0/0x44()
initcall 0xc037b104: tty_class_init+0x0/0x44() returned 0.
initcall 0xc037b104 ran for 0 msecs: tty_class_init+0x0/0x44()
Calling initcall 0xc037bb2c: vtconsole_class_init+0x0/0xf0()
initcall 0xc037bb2c: vtconsole_class_init+0x0/0xf0() returned 0.
initcall 0xc037bb2c ran for 0 msecs: vtconsole_class_init+0x0/0xf0()
Calling initcall 0xc0006998: irq_late_init+0x0/0x88()
initcall 0xc0006998: irq_late_init+0x0/0x88() returned 0.
initcall 0xc0006998 ran for 0 msecs: irq_late_init+0x0/0x88()
Calling initcall 0xc036ba08: vdso_init+0x0/0x43c()
initcall 0xc036ba08: vdso_init+0x0/0x43c() returned 0.
initcall 0xc036ba08 ran for 0 msecs: vdso_init+0x0/0x43c()
Calling initcall 0xc000fb7c: powerpc_debugfs_init+0x0/0x40()
initcall 0xc000fb7c: powerpc_debugfs_init+0x0/0x40() returned 0.
initcall 0xc000fb7c ran for 0 msecs: powerpc_debugfs_init+0x0/0x40()
Calling initcall 0xc036df0c: ppc_init+0x0/0x84()
initcall 0xc036df0c: ppc_init+0x0/0x84() returned 0.
initcall 0xc036df0c ran for 0 msecs: ppc_init+0x0/0x84()
Calling initcall 0xc0371048: pcibios_init+0x0/0x138()
PCI: Probing PCI hardware
PCI: Scanning bus 0000:00
PCI: Found 0000:00:00.0 [10cc/0660] 000600 00
pci 0000:00:00.0: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:01.0 [10cc/0661] 000604 01
pci 0000:00:01.0: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:06.0 [10b7/9200] 000200 00
pci 0000:00:06.0: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:07.0 [1106/0686] 000601 00
pci 0000:00:07.0: calling quirk 0xc02add6c: 0xc02add6c()
pci 0000:00:07.0: calling quirk 0xc01271b0: quirk_via_bridge+0x0/0x98()
PCI: Found 0000:00:07.1 [1106/0571] 000101 00
pci 0000:00:07.1: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:07.2 [1106/3038] 000c03 00
pci 0000:00:07.2: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:07.3 [1106/3038] 000c03 00
pci 0000:00:07.3: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:07.4 [1106/3057] 000000 00
pci 0000:00:07.4: calling quirk 0xc02add6c: 0xc02add6c()
pci 0000:00:07.4: calling quirk 0xc02af7ac: 0xc02af7ac()
pci 0000:00:07.4: calling quirk 0xc02aee10: 0xc02aee10()
PCI: Found 0000:00:07.5 [1106/3058] 000401 00
pci 0000:00:07.5: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:07.6 [1106/3068] 000780 00
pci 0000:00:07.6: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:08.0 [10ec/8139] 000200 00
pci 0000:00:08.0: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:09.0 [1102/0002] 000401 00
pci 0000:00:09.0: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:09.1 [1102/7002] 000980 00
pci 0000:00:09.1: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:0a.0 [10b9/5237] 000c03 00
pci 0000:00:0a.0: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:0a.1 [10b9/5237] 000c03 00
pci 0000:00:0a.1: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:0a.2 [10b9/5237] 000c03 00
pci 0000:00:0a.2: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:0a.3 [10b9/5239] 000c03 00
pci 0000:00:0a.3: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:00:0a.4 [10b9/5253] 000c00 00
pci 0000:00:0a.4: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Fixups for bus 0000:00
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000001 0x00000000...],ointsize=1
 -> no parent found !
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000001 0x00003000...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0x7)
irq: -> using host @c040f180
irq: -> existing mapping on virq 7
of_irq_map_one: dev=/pci@80000000/ide@7,1, index=0
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000004 0x00003a00...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0x5)
irq: -> using host @c040f180
irq: -> existing mapping on virq 5
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000004 0x00003b00...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0x5)
irq: -> using host @c040f180
irq: -> existing mapping on virq 5
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000003 0x00003d00...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0xb)
irq: -> using host @c040f180
irq: -> existing mapping on virq 11
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000003 0x00003e00...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0xb)
irq: -> using host @c040f180
irq: -> existing mapping on virq 11
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000001 0x00004000...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0x9)
irq: -> using host @c040f180
irq: -> existing mapping on virq 9
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000001 0x00004800...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0xa)
irq: -> using host @c040f180
irq: -> existing mapping on virq 10
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000002 0x00005000...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0x7)
irq: -> using host @c040f180
irq: -> existing mapping on virq 7
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000002 0x00005100...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0x7)
irq: -> using host @c040f180
irq: -> existing mapping on virq 7
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000002 0x00005200...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0x7)
irq: -> using host @c040f180
irq: -> existing mapping on virq 7
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000001 0x00005300...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0xb)
irq: -> using host @c040f180
irq: -> existing mapping on virq 11
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000003 0x00005400...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0x9)
irq: -> using host @c040f180
irq: -> existing mapping on virq 9
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0
PCI: Scanning bus 0000:01
PCI: Found 0000:01:00.0 [1002/5961] 000300 00
pci 0000:01:00.0: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Found 0000:01:00.1 [1002/5941] 000380 00
pci 0000:01:00.1: calling quirk 0xc02add6c: 0xc02add6c()
PCI: Fixups for bus 0000:01
of_irq_map_raw: par=/pci@80000000,intspec=[0x00000001 0x00000800...],ointsize=1
 -> no parent found !
irq: irq_create_mapping(0x00000000, 0xb)
irq: -> using host @c040f180
irq: -> existing mapping on virq 11
PCI: Bus scan for 0000:01 returning with max=01
PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 1
PCI: Bus scan for 0000:00 returning with max=01
PCI: Cannot allocate resource region 0 of device 0000:01:00.1, will remap
PCI: Cannot allocate resource region 1 of device 0000:01:00.1, will remap
  got res [88100000:8811ffff] bus [88100000:8811ffff] flags 20007200 for BAR 6 of 0000:00:06.0
  got res [88120000:8812ffff] bus [88120000:8812ffff] flags 20007200 for BAR 6 of 0000:00:0a.4
PCI: Failed to allocate mem resource #0:8000000@88000000 for 0000:01:00.1
  got res [88020000:8803ffff] bus [88020000:8803ffff] flags 20007200 for BAR 6 of 0000:01:00.0
  got res [88010000:8801ffff] bus [88010000:8801ffff] flags 20000200 for BAR 1 of 0000:01:00.1
PCI: moved device 0000:01:00.1 resource 1 (200) to 88010000
PCI: Bridge: 0000:00:01.0
  IO window: 2000-2fff
  MEM window: 0x88000000-0x880fffff
  PREFETCH window: 0x0000000080000000-0x0000000087ffffff
initcall 0xc0371048: pcibios_init+0x0/0x138() returned 0.
initcall 0xc0371048 ran for 3 msecs: pcibios_init+0x0/0x138()
Calling initcall 0xc0373f94: param_sysfs_init+0x0/0x1b8()
initcall 0xc0373f94: param_sysfs_init+0x0/0x1b8() returned 0.
initcall 0xc0373f94 ran for 3 msecs: param_sysfs_init+0x0/0x1b8()
Calling initcall 0xc00436c8: pm_sysrq_init+0x0/0x30()
initcall 0xc00436c8: pm_sysrq_init+0x0/0x30() returned 0.
initcall 0xc00436c8 ran for 0 msecs: pm_sysrq_init+0x0/0x30()
Calling initcall 0xc0376c80: readahead_init+0x0/0x28()
initcall 0xc0376c80: readahead_init+0x0/0x28() returned 0.
initcall 0xc0376c80 ran for 0 msecs: readahead_init+0x0/0x28()
Calling initcall 0xc0377cec: init_bio+0x0/0xf0()
initcall 0xc0377cec: init_bio+0x0/0xf0() returned 0.
initcall 0xc0377cec ran for 0 msecs: init_bio+0x0/0xf0()
Calling initcall 0xc0379590: blk_settings_init+0x0/0x30()
initcall 0xc0379590: blk_settings_init+0x0/0x30() returned 0.
initcall 0xc0379590 ran for 0 msecs: blk_settings_init+0x0/0x30()
Calling initcall 0xc03795c0: blk_ioc_init+0x0/0x44()
initcall 0xc03795c0: blk_ioc_init+0x0/0x44() returned 0.
initcall 0xc03795c0 ran for 0 msecs: blk_ioc_init+0x0/0x44()
Calling initcall 0xc0379604: genhd_device_init+0x0/0x5c()
initcall 0xc0379604: genhd_device_init+0x0/0x5c() returned 0.
initcall 0xc0379604 ran for 0 msecs: genhd_device_init+0x0/0x5c()
Calling initcall 0xc037a5e0: fbmem_init+0x0/0xc8()
initcall 0xc037a5e0: fbmem_init+0x0/0xc8() returned 0.
initcall 0xc037a5e0 ran for 0 msecs: fbmem_init+0x0/0xc8()
Calling initcall 0xc037b504: misc_init+0x0/0xb8()
initcall 0xc037b504: misc_init+0x0/0xb8() returned 0.
initcall 0xc037b504 ran for 0 msecs: misc_init+0x0/0xb8()
Calling initcall 0xc037f6d8: init_scsi+0x0/0xa8()
SCSI subsystem initialized
initcall 0xc037f6d8: init_scsi+0x0/0xa8() returned 0.
initcall 0xc037f6d8 ran for 0 msecs: init_scsi+0x0/0xa8()
Calling initcall 0xc037fd68: usb_init+0x0/0x148()
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
initcall 0xc037fd68: usb_init+0x0/0x148() returned 0.
initcall 0xc037fd68 ran for 0 msecs: usb_init+0x0/0x148()
Calling initcall 0xc03803e0: serio_init+0x0/0xa4()
initcall 0xc03803e0: serio_init+0x0/0xa4() returned 0.
initcall 0xc03803e0 ran for 0 msecs: serio_init+0x0/0xa4()
Calling initcall 0xc0380590: input_init+0x0/0x13c()
initcall 0xc0380590: input_init+0x0/0x13c() returned 0.
initcall 0xc0380590 ran for 0 msecs: input_init+0x0/0x13c()
Calling initcall 0xc03809ec: rtc_init+0x0/0x94()
initcall 0xc03809ec: rtc_init+0x0/0x94() returned 0.
initcall 0xc03809ec ran for 0 msecs: rtc_init+0x0/0x94()
Calling initcall 0xc0381050: i2c_init+0x0/0x7c()
initcall 0xc0381050: i2c_init+0x0/0x7c() returned 0.
initcall 0xc0381050 ran for 0 msecs: i2c_init+0x0/0x7c()
Calling initcall 0xc0381188: hwmon_init+0x0/0x64()
initcall 0xc0381188: hwmon_init+0x0/0x64() returned 0.
initcall 0xc0381188 ran for 0 msecs: hwmon_init+0x0/0x64()
Calling initcall 0xc03811ec: thermal_init+0x0/0x54()
initcall 0xc03811ec: thermal_init+0x0/0x54() returned 0.
initcall 0xc03811ec ran for 0 msecs: thermal_init+0x0/0x54()
Calling initcall 0xc03813e0: proto_init+0x0/0x54()
initcall 0xc03813e0: proto_init+0x0/0x54() returned 0.
initcall 0xc03813e0 ran for 0 msecs: proto_init+0x0/0x54()
Calling initcall 0xc03819c0: net_dev_init+0x0/0x12c()
initcall 0xc03819c0: net_dev_init+0x0/0x12c() returned 0.
initcall 0xc03819c0 ran for 0 msecs: net_dev_init+0x0/0x12c()
Calling initcall 0xc0381b88: neigh_init+0x0/0x98()
initcall 0xc0381b88: neigh_init+0x0/0x98() returned 0.
initcall 0xc0381b88 ran for 0 msecs: neigh_init+0x0/0x98()
Calling initcall 0xc0381ee0: fib_rules_init+0x0/0xd0()
initcall 0xc0381ee0: fib_rules_init+0x0/0xd0() returned 0.
initcall 0xc0381ee0 ran for 0 msecs: fib_rules_init+0x0/0xd0()
Calling initcall 0xc0381fb0: pktsched_init+0x0/0xf4()
initcall 0xc0381fb0: pktsched_init+0x0/0xf4() returned 0.
initcall 0xc0381fb0 ran for 0 msecs: pktsched_init+0x0/0xf4()
Calling initcall 0xc03820cc: tc_filter_init+0x0/0x70()
initcall 0xc03820cc: tc_filter_init+0x0/0x70() returned 0.
initcall 0xc03820cc ran for 0 msecs: tc_filter_init+0x0/0x70()
Calling initcall 0xc038213c: tc_action_init+0x0/0x70()
initcall 0xc038213c: tc_action_init+0x0/0x70() returned 0.
initcall 0xc038213c ran for 0 msecs: tc_action_init+0x0/0x70()
Calling initcall 0xc0382350: genl_init+0x0/0xf8()
initcall 0xc0382350: genl_init+0x0/0xf8() returned 0.
initcall 0xc0382350 ran for 3 msecs: genl_init+0x0/0xf8()
Calling initcall 0xc0383f5c: atm_init+0x0/0xd4()
NET: Registered protocol family 8
NET: Registered protocol family 20
initcall 0xc0383f5c: atm_init+0x0/0xd4() returned 0.
initcall 0xc0383f5c ran for 0 msecs: atm_init+0x0/0xd4()
Calling initcall 0xc03841e0: wireless_nlevent_init+0x0/0x20()
initcall 0xc03841e0: wireless_nlevent_init+0x0/0x20() returned 0.
initcall 0xc03841e0 ran for 0 msecs: wireless_nlevent_init+0x0/0x20()
Calling initcall 0xc0384200: sysctl_init+0x0/0x48()
initcall 0xc0384200: sysctl_init+0x0/0x48() returned 0.
initcall 0xc0384200 ran for 0 msecs: sysctl_init+0x0/0x48()
Calling initcall 0xc03729b0: add_rtc+0x0/0xcc()
OF: ** translation for device /pci@80000000/isa@7/rtc@70 **
OF: bus is isa (na=2, ns=1) on /pci@80000000/isa@7
OF: translating address: 00000001 00000070
OF: parent bus is pci (na=3, ns=2) on /pci@80000000
OF: walking ranges...
OF: ISA map, cp=0, s=10000, da=70
OF: parent translation for: 01000000 00000000 00000000
OF: with offset: 70
OF: one level translation: 01000000 00000000 00000070
OF: parent bus is default (na=1, ns=1) on /
OF: walking ranges...
OF: PCI map, cp=0, s=c00000, da=70
OF: parent translation for: fe000000
OF: with offset: 70
OF: one level translation: fe000070
OF: reached root node
initcall 0xc03729b0: add_rtc+0x0/0xcc() returned 0.
initcall 0xc03729b0 ran for 0 msecs: add_rtc+0x0/0xcc()
Calling initcall 0xc0374774: clocksource_done_booting+0x0/0x14()
initcall 0xc0374774: clocksource_done_booting+0x0/0x14() returned 0.
initcall 0xc0374774 ran for 0 msecs: clocksource_done_booting+0x0/0x14()
Calling initcall 0xc03774d0: init_pipe_fs+0x0/0x70()
initcall 0xc03774d0: init_pipe_fs+0x0/0x70() returned 0.
initcall 0xc03774d0 ran for 0 msecs: init_pipe_fs+0x0/0x70()
Calling initcall 0xc0377f84: eventpoll_init+0x0/0x98()
initcall 0xc0377f84: eventpoll_init+0x0/0x98() returned 0.
initcall 0xc0377f84 ran for 0 msecs: eventpoll_init+0x0/0x98()
Calling initcall 0xc037801c: anon_inode_init+0x0/0x128()
initcall 0xc037801c: anon_inode_init+0x0/0x128() returned 0.
initcall 0xc037801c ran for 0 msecs: anon_inode_init+0x0/0x128()
Calling initcall 0xc037ad74: chr_dev_init+0x0/0xbc()
initcall 0xc037ad74: chr_dev_init+0x0/0xbc() returned 0.
initcall 0xc037ad74 ran for 0 msecs: chr_dev_init+0x0/0xbc()
Calling initcall 0xc037d468: firmware_class_init+0x0/0x8c()
initcall 0xc037d468: firmware_class_init+0x0/0x8c() returned 0.
initcall 0xc037d468 ran for 0 msecs: firmware_class_init+0x0/0x8c()
Calling initcall 0xc037eca8: loopback_init+0x0/0x28()
initcall 0xc037eca8: loopback_init+0x0/0x28() returned 0.
initcall 0xc037eca8 ran for 0 msecs: loopback_init+0x0/0x28()
Calling initcall 0xc038129c: cpufreq_gov_performance_init+0x0/0x28()
initcall 0xc038129c: cpufreq_gov_performance_init+0x0/0x28() returned 0.
initcall 0xc038129c ran for 0 msecs: cpufreq_gov_performance_init+0x0/0x28()
Calling initcall 0xc03832fc: inet_init+0x0/0x344()
NET: Registered protocol family 2
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
initcall 0xc03832fc: inet_init+0x0/0x344() returned 0.
initcall 0xc03832fc ran for 49 msecs: inet_init+0x0/0x344()
Calling initcall 0xc036b4e4: populate_rootfs+0x0/0xf8()
initcall 0xc036b4e4: populate_rootfs+0x0/0xf8() returned 0.
initcall 0xc036b4e4 ran for 0 msecs: populate_rootfs+0x0/0xf8()
Calling initcall 0xc036b800: irq_debugfs_init+0x0/0x50()
initcall 0xc036b800: irq_debugfs_init+0x0/0x50() returned -12.
initcall 0xc036b800 ran for 0 msecs: irq_debugfs_init+0x0/0x50()
initcall at 0xc036b800: irq_debugfs_init+0x0/0x50(): returned with error code -12
Calling initcall 0xc036be58: register_powersave_nap_sysctl+0x0/0x2c()
initcall 0xc036be58: register_powersave_nap_sysctl+0x0/0x2c() returned 0.
initcall 0xc036be58 ran for 0 msecs: register_powersave_nap_sysctl+0x0/0x2c()
Calling initcall 0xc036bed4: TAU_init+0x0/0xf4()
Thermal assist unit not available
initcall 0xc036bed4: TAU_init+0x0/0xf4() returned 1.
initcall 0xc036bed4 ran for 0 msecs: TAU_init+0x0/0xf4()
initcall at 0xc036bed4: TAU_init+0x0/0xf4(): returned with error code 1
Calling initcall 0xc036c7f0: export_flat_device_tree+0x0/0x60()
initcall 0xc036c7f0: export_flat_device_tree+0x0/0x60() returned 0.
initcall 0xc036c7f0 ran for 0 msecs: export_flat_device_tree+0x0/0x60()
Calling initcall 0xc036dc2c: add_pcspkr+0x0/0x80()
initcall 0xc036dc2c: add_pcspkr+0x0/0x80() returned 0.
initcall 0xc036dc2c ran for 0 msecs: add_pcspkr+0x0/0x80()
Calling initcall 0xc037051c: serial_dev_init+0x0/0x194()
Fixing serial ports interrupts and IO ports ...
fixup_port_irq(0)
enter irq_of_parse_and_map()
of_irq_map_one: dev=/pci@80000000/isa@7/serial@3f8, index=0
 intsize=2 intlen=2
of_irq_map_raw: par=/pci@80000000/isa@7,intspec=[0x00000004 0x00000003...],ointsize=2
of_irq_map_raw: ipar=/pci@80000000/isa@7, size=2
 -> addrsize=2
 -> no map, getting parent
 -> new parent: /pci@80000000/isa@7/interrupt-controller@20
 -> got it !
calling irq_create_of_mapping()
irq: controller = /pci@80000000/isa@7/interrupt-controller@20, intspec = 4, intsize = 2
irq: find host controller
irq: host = 0xc040f180
irq: irq_create_mapping(0xc040f180, 0x4)
irq: -> using host @c040f180
irq: -> existing mapping on virq 4
irq: created irq mapping, virq = 4
irq: created irq mapping, virq = 4
fixup_port_pio(0)
port 0, IO 3f8 -> 3f8
fixup_port_irq(1)
enter irq_of_parse_and_map()
of_irq_map_one: dev=/pci@80000000/isa@7/serial@2f8, index=0
 intsize=2 intlen=2
of_irq_map_raw: par=/pci@80000000/isa@7,intspec=[0x00000003 0x00000003...],ointsize=2
of_irq_map_raw: ipar=/pci@80000000/isa@7, size=2
 -> addrsize=2
 -> no map, getting parent
 -> new parent: /pci@80000000/isa@7/interrupt-controller@20
 -> got it !
calling irq_create_of_mapping()
irq: controller = /pci@80000000/isa@7/interrupt-controller@20, intspec = 3, intsize = 2
irq: find host controller
irq: host = 0xc040f180
irq: irq_create_mapping(0xc040f180, 0x3)
irq: -> using host @c040f180
irq: -> existing mapping on virq 3
irq: created irq mapping, virq = 3
irq: created irq mapping, virq = 3
fixup_port_pio(1)
port 1, IO 2f8 -> 2f8
Registering platform serial ports
initcall 0xc037051c: serial_dev_init+0x0/0x194() returned 0.
initcall 0xc037051c ran for 0 msecs: serial_dev_init+0x0/0x194()
Calling initcall 0xc0371534: audit_classes_init+0x0/0x70()
initcall 0xc0371534: audit_classes_init+0x0/0x70() returned 0.
initcall 0xc0371534 ran for 0 msecs: audit_classes_init+0x0/0x70()
Calling initcall 0xc0372078: setup_kcore+0x0/0xe0()
setup_kcore: restrict size=3fffffff
initcall 0xc0372078: setup_kcore+0x0/0xe0() returned 0.
initcall 0xc0372078 ran for 0 msecs: setup_kcore+0x0/0xe0()
Calling initcall 0xc03735b0: create_proc_profile+0x0/0x74()
initcall 0xc03735b0: create_proc_profile+0x0/0x74() returned 0.
initcall 0xc03735b0 ran for 0 msecs: create_proc_profile+0x0/0x74()
Calling initcall 0xc03739b0: ioresources_init+0x0/0x70()
initcall 0xc03739b0: ioresources_init+0x0/0x70() returned 0.
initcall 0xc03739b0 ran for 0 msecs: ioresources_init+0x0/0x70()
Calling initcall 0xc0373abc: uid_cache_init+0x0/0x94()
initcall 0xc0373abc: uid_cache_init+0x0/0x94() returned 0.
initcall 0xc0373abc ran for 0 msecs: uid_cache_init+0x0/0x94()
Calling initcall 0xc037414c: init_posix_timers+0x0/0xc0()
initcall 0xc037414c: init_posix_timers+0x0/0xc0() returned 0.
initcall 0xc037414c ran for 0 msecs: init_posix_timers+0x0/0xc0()
Calling initcall 0xc037420c: init_posix_cpu_timers+0x0/0xf0()
initcall 0xc037420c: init_posix_cpu_timers+0x0/0xf0() returned 0.
initcall 0xc037420c ran for 0 msecs: init_posix_cpu_timers+0x0/0xf0()
Calling initcall 0xc03743b8: nsproxy_cache_init+0x0/0x44()
initcall 0xc03743b8: nsproxy_cache_init+0x0/0x44() returned 0.
initcall 0xc03743b8 ran for 0 msecs: nsproxy_cache_init+0x0/0x44()
Calling initcall 0xc0374570: timekeeping_init_device+0x0/0x44()
initcall 0xc0374570: timekeeping_init_device+0x0/0x44() returned 0.
initcall 0xc0374570 ran for 0 msecs: timekeeping_init_device+0x0/0x44()
Calling initcall 0xc0374840: init_clocksource_sysfs+0x0/0x80()
initcall 0xc0374840: init_clocksource_sysfs+0x0/0x80() returned 0.
initcall 0xc0374840 ran for 0 msecs: init_clocksource_sysfs+0x0/0x80()
Calling initcall 0xc03748e8: init_timer_list_procfs+0x0/0x4c()
initcall 0xc03748e8: init_timer_list_procfs+0x0/0x4c() returned 0.
initcall 0xc03748e8 ran for 0 msecs: init_timer_list_procfs+0x0/0x4c()
Calling initcall 0xc03749d4: futex_init+0x0/0xc8()
initcall 0xc03749d4: futex_init+0x0/0xc8() returned 0.
initcall 0xc03749d4 ran for 0 msecs: futex_init+0x0/0xc8()
Calling initcall 0xc0374a9c: proc_dma_init+0x0/0x48()
initcall 0xc0374a9c: proc_dma_init+0x0/0x48() returned 0.
initcall 0xc0374a9c ran for 0 msecs: proc_dma_init+0x0/0x48()
Calling initcall 0xc0374ae4: kallsyms_init+0x0/0x48()
initcall 0xc0374ae4: kallsyms_init+0x0/0x48() returned 0.
initcall 0xc0374ae4 ran for 0 msecs: kallsyms_init+0x0/0x48()
Calling initcall 0xc0374c38: audit_init+0x0/0x158()
audit: initializing netlink socket (disabled)
type=2000 audit(0.376:1): initialized
initcall 0xc0374c38: audit_init+0x0/0x158() returned 0.
initcall 0xc0374c38 ran for 0 msecs: audit_init+0x0/0x158()
Calling initcall 0xc0374e54: audit_tree_init+0x0/0x6c()
initcall 0xc0374e54: audit_tree_init+0x0/0x6c() returned 0.
initcall 0xc0374e54 ran for 0 msecs: audit_tree_init+0x0/0x6c()
Calling initcall 0xc037508c: relay_init+0x0/0x8()
initcall 0xc037508c: relay_init+0x0/0x8() returned 0.
initcall 0xc037508c ran for 0 msecs: relay_init+0x0/0x8()
Calling initcall 0xc0375094: utsname_sysctl_init+0x0/0x2c()
initcall 0xc0375094: utsname_sysctl_init+0x0/0x2c() returned 0.
initcall 0xc0375094 ran for 0 msecs: utsname_sysctl_init+0x0/0x2c()
Calling initcall 0xc0375fb4: init_per_zone_pages_min+0x0/0x5c()
initcall 0xc0375fb4: init_per_zone_pages_min+0x0/0x5c() returned 0.
initcall 0xc0375fb4 ran for 0 msecs: init_per_zone_pages_min+0x0/0x5c()
Calling initcall 0xc0376c44: pdflush_init+0x0/0x3c()
initcall 0xc0376c44: pdflush_init+0x0/0x3c() returned 0.
initcall 0xc0376c44 ran for 0 msecs: pdflush_init+0x0/0x3c()
Calling initcall 0xc0376d00: kswapd_init+0x0/0x2c()
initcall 0xc0376d00: kswapd_init+0x0/0x2c() returned 0.
initcall 0xc0376d00 ran for 0 msecs: kswapd_init+0x0/0x2c()
Calling initcall 0xc0376dfc: init_emergency_pool+0x0/0x88()
highmem bounce pool size: 64 pages
initcall 0xc0376dfc: init_emergency_pool+0x0/0x88() returned 0.
initcall 0xc0376dfc ran for 0 msecs: init_emergency_pool+0x0/0x88()
Calling initcall 0xc0376e84: procswaps_init+0x0/0x48()
initcall 0xc0376e84: procswaps_init+0x0/0x48() returned 0.
initcall 0xc0376e84 ran for 0 msecs: procswaps_init+0x0/0x48()
Calling initcall 0xc0376ecc: init_tmpfs+0x0/0xf0()
initcall 0xc0376ecc: init_tmpfs+0x0/0xf0() returned 0.
initcall 0xc0376ecc ran for 0 msecs: init_tmpfs+0x0/0xf0()
Calling initcall 0xc03771b4: slab_sysfs_init+0x0/0x118()
initcall 0xc03771b4: slab_sysfs_init+0x0/0x118() returned 0.
initcall 0xc03771b4 ran for 5 msecs: slab_sysfs_init+0x0/0x118()
Calling initcall 0xc0377540: fasync_init+0x0/0x44()
initcall 0xc0377540: fasync_init+0x0/0x44() returned 0.
initcall 0xc0377540 ran for 0 msecs: fasync_init+0x0/0x44()
Calling initcall 0xc0377bf8: aio_setup+0x0/0x94()
initcall 0xc0377bf8: aio_setup+0x0/0x94() returned 0.
initcall 0xc0377bf8 ran for 0 msecs: aio_setup+0x0/0x94()
Calling initcall 0xc0377e88: inotify_setup+0x0/0x14()
initcall 0xc0377e88: inotify_setup+0x0/0x14() returned 0.
initcall 0xc0377e88 ran for 0 msecs: inotify_setup+0x0/0x14()
Calling initcall 0xc0377e9c: inotify_user_setup+0x0/0xe8()
initcall 0xc0377e9c: inotify_user_setup+0x0/0xe8() returned 0.
initcall 0xc0377e9c ran for 0 msecs: inotify_user_setup+0x0/0xe8()
Calling initcall 0xc0378194: init_mbcache+0x0/0x2c()
initcall 0xc0378194: init_mbcache+0x0/0x2c() returned 0.
initcall 0xc0378194 ran for 0 msecs: init_mbcache+0x0/0x2c()
Calling initcall 0xc03781c0: dquot_init+0x0/0x114()
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
initcall 0xc03781c0: dquot_init+0x0/0x114() returned 0.
initcall 0xc03781c0 ran for 0 msecs: dquot_init+0x0/0x114()
Calling initcall 0xc03782d4: dnotify_init+0x0/0x44()
initcall 0xc03782d4: dnotify_init+0x0/0x44() returned 0.
initcall 0xc03782d4 ran for 0 msecs: dnotify_init+0x0/0x44()
Calling initcall 0xc037899c: init_devpts_fs+0x0/0x64()
initcall 0xc037899c: init_devpts_fs+0x0/0x64() returned 0.
initcall 0xc037899c ran for 0 msecs: init_devpts_fs+0x0/0x64()
Calling initcall 0xc0378a00: init_ext3_fs+0x0/0x8c()
initcall 0xc0378a00: init_ext3_fs+0x0/0x8c() returned 0.
initcall 0xc0378a00 ran for 0 msecs: init_ext3_fs+0x0/0x8c()
Calling initcall 0xc0378b8c: journal_init+0x0/0xc8()
initcall 0xc0378b8c: journal_init+0x0/0xc8() returned 0.
initcall 0xc0378b8c ran for 0 msecs: journal_init+0x0/0xc8()
Calling initcall 0xc0378c54: init_ext2_fs+0x0/0x8c()
initcall 0xc0378c54: init_ext2_fs+0x0/0x8c() returned 0.
initcall 0xc0378c54 ran for 0 msecs: init_ext2_fs+0x0/0x8c()
Calling initcall 0xc0378d3c: init_cramfs_fs+0x0/0x4c()
initcall 0xc0378d3c: init_cramfs_fs+0x0/0x4c() returned 0.
initcall 0xc0378d3c ran for 0 msecs: init_cramfs_fs+0x0/0x4c()
Calling initcall 0xc0378d88: init_ramfs_fs+0x0/0x28()
initcall 0xc0378d88: init_ramfs_fs+0x0/0x28() returned 0.
initcall 0xc0378d88 ran for 0 msecs: init_ramfs_fs+0x0/0x28()
Calling initcall 0xc0378e0c: init_affs_fs+0x0/0x7c()
initcall 0xc0378e0c: init_affs_fs+0x0/0x7c() returned 0.
initcall 0xc0378e0c ran for 0 msecs: init_affs_fs+0x0/0x7c()
Calling initcall 0xc0378ef8: ipc_init+0x0/0x2c()
initcall 0xc0378ef8: ipc_init+0x0/0x2c() returned 0.
initcall 0xc0378ef8 ran for 0 msecs: ipc_init+0x0/0x2c()
Calling initcall 0xc037908c: ipc_sysctl_init+0x0/0x2c()
initcall 0xc037908c: ipc_sysctl_init+0x0/0x2c() returned 0.
initcall 0xc037908c ran for 0 msecs: ipc_sysctl_init+0x0/0x2c()
Calling initcall 0xc03790b8: init_mqueue_fs+0x0/0xe8()
initcall 0xc03790b8: init_mqueue_fs+0x0/0xe8() returned 0.
initcall 0xc03790b8 ran for 0 msecs: init_mqueue_fs+0x0/0xe8()
Calling initcall 0xc0379330: key_proc_init+0x0/0x54()
initcall 0xc0379330: key_proc_init+0x0/0x54() returned 0.
initcall 0xc0379330 ran for 0 msecs: key_proc_init+0x0/0x54()
Calling initcall 0xc0379384: crypto_algapi_init+0x0/0x24()
initcall 0xc0379384: crypto_algapi_init+0x0/0x24() returned 0.
initcall 0xc0379384 ran for 0 msecs: crypto_algapi_init+0x0/0x24()
Calling initcall 0xc03793ec: cryptomgr_init+0x0/0x28()
initcall 0xc03793ec: cryptomgr_init+0x0/0x28() returned 0.
initcall 0xc03793ec ran for 0 msecs: cryptomgr_init+0x0/0x28()
Calling initcall 0xc0379414: hmac_module_init+0x0/0x28()
initcall 0xc0379414: hmac_module_init+0x0/0x28() returned 0.
initcall 0xc0379414 ran for 0 msecs: hmac_module_init+0x0/0x28()
Calling initcall 0xc037943c: init+0x0/0x28()
initcall 0xc037943c: init+0x0/0x28() returned 0.
initcall 0xc037943c ran for 0 msecs: init+0x0/0x28()
Calling initcall 0xc037980c: noop_init+0x0/0x2c()
io scheduler noop registered
initcall 0xc037980c: noop_init+0x0/0x2c() returned 0.
initcall 0xc037980c ran for 0 msecs: noop_init+0x0/0x2c()
Calling initcall 0xc0379838: as_init+0x0/0x2c()
io scheduler anticipatory registered
initcall 0xc0379838: as_init+0x0/0x2c() returned 0.
initcall 0xc0379838 ran for 0 msecs: as_init+0x0/0x2c()
Calling initcall 0xc0379864: deadline_init+0x0/0x2c()
io scheduler deadline registered
initcall 0xc0379864: deadline_init+0x0/0x2c() returned 0.
initcall 0xc0379864 ran for 0 msecs: deadline_init+0x0/0x2c()
Calling initcall 0xc0379890: cfq_init+0x0/0xc8()
io scheduler cfq registered (default)
initcall 0xc0379890: cfq_init+0x0/0xc8() returned 0.
initcall 0xc0379890 ran for 0 msecs: cfq_init+0x0/0xc8()
Calling initcall 0xc02ae604: 0xc02ae604()
pci 0000:00:00.0: calling quirk 0xc00168f8: amigaone_pci_fixup_articias+0x0/0xac()
Fixing host bridge settings
pci 0000:00:00.0: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:00.0: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:01.0: calling quirk 0xc0016898: amigaone_pci_fixup_articias_agp+0x0/0x60()
Fixing AGP/PCI bus 1 bridge settings
pci 0000:00:01.0: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:01.0: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:06.0: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:06.0: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:07.0: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:07.0: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:07.1: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:07.1: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:07.2: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:07.2: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:07.3: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:07.3: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:07.4: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:07.4: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:07.5: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:07.5: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:07.6: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:07.6: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:08.0: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:08.0: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:09.0: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:09.0: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:09.1: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:09.1: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:0a.0: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:0a.0: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:0a.1: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:0a.1: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:0a.2: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:0a.2: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:0a.3: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:0a.3: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:00:0a.4: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:00:0a.4: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:01:00.0: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:01:00.0: calling quirk 0xc02b6fe0: 0xc02b6fe0()
pci 0000:01:00.1: calling quirk 0xc0127c50: quirk_cardbus_legacy+0x0/0x44()
pci 0000:01:00.1: calling quirk 0xc02b6fe0: 0xc02b6fe0()
initcall 0xc02ae604: 0xc02ae604() returned 0.
initcall 0xc02ae604 ran for 0 msecs: 0xc02ae604()
Calling initcall 0xc037a258: pci_proc_init+0x0/0x9c()
initcall 0xc037a258: pci_proc_init+0x0/0x9c() returned 0.
initcall 0xc037a258 ran for 0 msecs: pci_proc_init+0x0/0x9c()
Calling initcall 0xc037a2f4: pcie_portdrv_init+0x0/0x6c()
initcall 0xc037a2f4: pcie_portdrv_init+0x0/0x6c() returned 0.
initcall 0xc037a2f4 ran for 0 msecs: pcie_portdrv_init+0x0/0x6c()
Calling initcall 0xc037a360: aer_service_init+0x0/0x44()
initcall 0xc037a360: aer_service_init+0x0/0x44() returned 0.
initcall 0xc037a360 ran for 0 msecs: aer_service_init+0x0/0x44()
Calling initcall 0xc037a6c4: fb_console_init+0x0/0x184()
initcall 0xc037a6c4: fb_console_init+0x0/0x184() returned 0.
initcall 0xc037a6c4 ran for 0 msecs: fb_console_init+0x0/0x184()
Calling initcall 0xc037ab54: radeonfb_init+0x0/0x220()
radeonfb (0000:01:00.0): Cannot match card to OF node !
radeonfb: Found Intel x86 BIOS ROM Image
radeonfb: Retrieved PLL infos from BIOS
radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=250.00 Mhz, System=200.00 MHz
radeonfb: PLL min 20000 max 40000
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-1: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
i2c-adapter i2c-3: unable to read EDID block.
radeonfb: Monitor 1 type CRT found
radeonfb: EDID probed
radeonfb: Monitor 2 type no found
Console: switching to colour frame buffer device 200x75
radeonfb (0000:01:00.0): ATI Radeon Ya 
initcall 0xc037ab54: radeonfb_init+0x0/0x220() returned 0.
initcall 0xc037ab54 ran for 4490 msecs: radeonfb_init+0x0/0x220()
Calling initcall 0xc037ae58: rand_initialize+0x0/0x44()
initcall 0xc037ae58: rand_initialize+0x0/0x44() returned 0.
initcall 0xc037ae58 ran for 0 msecs: rand_initialize+0x0/0x44()
Calling initcall 0xc037aefc: tty_init+0x0/0x208()
initcall 0xc037aefc: tty_init+0x0/0x208() returned 0.
initcall 0xc037aefc ran for 5 msecs: tty_init+0x0/0x208()
Calling initcall 0xc037b148: pty_init+0x0/0x3bc()
initcall 0xc037b148: pty_init+0x0/0x3bc() returned 0.
initcall 0xc037b148 ran for 2 msecs: pty_init+0x0/0x3bc()
Calling initcall 0xc037bc54: drm_core_init+0x0/0x168()
[drm] Initialized drm 1.1.0 20060810
initcall 0xc037bc54: drm_core_init+0x0/0x168() returned 0.
initcall 0xc037bc54 ran for 0 msecs: drm_core_init+0x0/0x168()
Calling initcall 0xc037bdbc: radeon_init+0x0/0x38()
[drm] Initialized radeon 1.28.0 20060524 on minor 0
initcall 0xc037bdbc: radeon_init+0x0/0x38() returned 0.
initcall 0xc037bdbc ran for 0 msecs: radeon_init+0x0/0x38()
Calling initcall 0xc037c240: serial8250_init+0x0/0x138()
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250.0: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
initcall 0xc037c240: serial8250_init+0x0/0x138() returned 0.
initcall 0xc037c240 ran for 1 msecs: serial8250_init+0x0/0x138()
Calling initcall 0xc037c3a8: serial8250_pci_init+0x0/0x34()
initcall 0xc037c3a8: serial8250_pci_init+0x0/0x34() returned 0.
initcall 0xc037c3a8 ran for 0 msecs: serial8250_pci_init+0x0/0x34()
Calling initcall 0xc037c8cc: parport_default_proc_register+0x0/0x3c()
initcall 0xc037c8cc: parport_default_proc_register+0x0/0x3c() returned 0.
initcall 0xc037c8cc ran for 0 msecs: parport_default_proc_register+0x0/0x3c()
Calling initcall 0xc037cca4: parport_pc_init+0x0/0x4ec()
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport_pc: VIA parallel port: io=0x378
initcall 0xc037cca4: parport_pc_init+0x0/0x4ec() returned 0.
initcall 0xc037cca4 ran for 92 msecs: parport_pc_init+0x0/0x4ec()
Calling initcall 0xc037d190: parport_serial_init+0x0/0x34()
initcall 0xc037d190: parport_serial_init+0x0/0x34() returned 0.
initcall 0xc037d190 ran for 0 msecs: parport_serial_init+0x0/0x34()
Calling initcall 0xc037d834: floppy_init+0x0/0x1050()
Floppy drive(s): fd0 is 2.88M
FDC 0 is a post-1991 82077
initcall 0xc037d834: floppy_init+0x0/0x1050() returned 0.
initcall 0xc037d834 ran for 27 msecs: floppy_init+0x0/0x1050()
Calling initcall 0xc037e884: brd_init+0x0/0x198()
brd: module loaded
initcall 0xc037e884: brd_init+0x0/0x198() returned 0.
initcall 0xc037e884 ran for 7 msecs: brd_init+0x0/0x198()
Calling initcall 0xc037ea54: vortex_init+0x0/0xe0()
3c59x: Donald Becker and others.
0000:00:06.0: 3Com PCI 3c905C Tornado at f100c000.
initcall 0xc037ea54: vortex_init+0x0/0xe0() returned 0.
initcall 0xc037ea54 ran for 31 msecs: vortex_init+0x0/0xe0()
Calling initcall 0xc037ebc8: net_olddevs_init+0x0/0xe0()
initcall 0xc037ebc8: net_olddevs_init+0x0/0xe0() returned 0.
initcall 0xc037ebc8 ran for 0 msecs: net_olddevs_init+0x0/0xe0()
Calling initcall 0xc037ed64: cp_init+0x0/0x34()
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:00:08.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:00:08.0: Try the "8139too" driver instead.
initcall 0xc037ed64: cp_init+0x0/0x34() returned 0.
initcall 0xc037ed64 ran for 16 msecs: cp_init+0x0/0x34()
Calling initcall 0xc037efb0: ide_init+0x0/0xd4()
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
initcall 0xc037efb0: ide_init+0x0/0xd4() returned 0.
initcall 0xc037efb0 ran for 11 msecs: ide_init+0x0/0xd4()
Calling initcall 0xc037f620: siimage_ide_init+0x0/0x34()
initcall 0xc037f620: siimage_ide_init+0x0/0x34() returned 0.
initcall 0xc037f620 ran for 0 msecs: siimage_ide_init+0x0/0x34()
Calling initcall 0xc037f654: via_ide_init+0x0/0x34()
VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at  PCI slot 0000:00:07.1
VIA_IDE 0000:00:07.1: calling quirk 0xc0127788: quirk_via_vlink+0x0/0xd4()
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:PIO, hdb:PIO
    ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:PIO, hdd:PIO
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: TOSHIBA ODD-DVD SD-M1802, ATAPI CD/DVD-ROM drive
hdd: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
hdd: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdd: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
initcall 0xc037f654: via_ide_init+0x0/0x34() returned 0.
initcall 0xc037f654 ran for 8816 msecs: via_ide_init+0x0/0x34()
Calling initcall 0xc037f688: idedisk_init+0x0/0x28()
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
hda: cache flushes supported
 hda: RDSK (512) hda1 (SFS^@)(res 2 spb 1) hda2 (LNX^@)(res 2 spb 2) hda3 (LNX^@)(res 2 spb 2) hda4 (LNX^@)(res 2 spb 2) hda5 (LNX^@)(res 2 spb 2) hda6 (SWP^@)(res 2 spb 2) hda7 (LNX^@)(res 2 spb 2) hda8 (DOS^C)(res 2 spb 2) hda9 (SFS^@)(res 2 spb 1) hda10 (SFS^@)(res 2 spb 1) hda11 (EXT^C)(res 2 spb 2) hda12 (LNX^@)(res 2 spb 2) hda13 (LNX^@)(res 2 spb 2) hda14 (LNX^@)(res 2 spb 2)
initcall 0xc037f688: idedisk_init+0x0/0x28() returned 0.
initcall 0xc037f688 ran for 36 msecs: idedisk_init+0x0/0x28()
Calling initcall 0xc037f6b0: ide_cdrom_init+0x0/0x28()
hdc: ATAPI 48X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
initcall 0xc037f6b0: ide_cdrom_init+0x0/0x28() returned 0.
initcall 0xc037f6b0 ran for 580 msecs: ide_cdrom_init+0x0/0x28()
Calling initcall 0xc037fac4: ieee1394_init+0x0/0x280()
initcall 0xc037fac4: ieee1394_init+0x0/0x280() returned 0.
initcall 0xc037fac4 ran for 0 msecs: ieee1394_init+0x0/0x280()
Calling initcall 0xc037fd44: cdrom_init+0x0/0x24()
initcall 0xc037fd44: cdrom_init+0x0/0x24() returned 0.
initcall 0xc037fd44 ran for 0 msecs: cdrom_init+0x0/0x24()
Calling initcall 0xc0380024: mon_init+0x0/0x114()
initcall 0xc0380024: mon_init+0x0/0x114() returned 0.
initcall 0xc0380024 ran for 0 msecs: mon_init+0x0/0x114()
Calling initcall 0xc0380274: ohci_hcd_mod_init+0x0/0x94()
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0a.0: OHCI Host Controller
ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:0a.0: irq 7, io mem 0x98101000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd 0000:00:0a.1: OHCI Host Controller
ohci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0a.1: irq 7, io mem 0x98102000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd 0000:00:0a.2: OHCI Host Controller
ohci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:0a.2: irq 7, io mem 0x98103000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
initcall 0xc0380274: ohci_hcd_mod_init+0x0/0x94() returned 0.
initcall 0xc0380274 ran for 580 msecs: ohci_hcd_mod_init+0x0/0x94()
Calling initcall 0xc0380308: uhci_hcd_init+0x0/0xd8()
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:07.2: calling quirk 0xc0127788: quirk_via_vlink+0x0/0xd4()
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:07.2: irq 5, io base 0x00802080
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:07.3: calling quirk 0xc0127788: quirk_via_vlink+0x0/0xd4()
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:07.3: irq 5, io base 0x008020a0
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
initcall 0xc0380308: uhci_hcd_init+0x0/0xd8() returned 0.
initcall 0xc0380308 ran for 290 msecs: uhci_hcd_init+0x0/0xd8()
Calling initcall 0xc0380484: i8042_init+0x0/0x10c()
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
initcall 0xc0380484: i8042_init+0x0/0x10c() returned 0.
initcall 0xc0380484 ran for 13 msecs: i8042_init+0x0/0x10c()
Calling initcall 0xc03806cc: mousedev_init+0x0/0xb4()
mice: PS/2 mouse device common for all mice
initcall 0xc03806cc: mousedev_init+0x0/0xb4() returned 0.
initcall 0xc03806cc ran for 6 msecs: mousedev_init+0x0/0xb4()
Calling initcall 0xc0380780: evdev_init+0x0/0x28()
initcall 0xc0380780: evdev_init+0x0/0x28() returned 0.
initcall 0xc0380780 ran for 0 msecs: evdev_init+0x0/0x28()
Calling initcall 0xc03807bc: atkbd_init+0x0/0x34()
initcall 0xc03807bc: atkbd_init+0x0/0x34() returned 0.
initcall 0xc03807bc ran for 0 msecs: atkbd_init+0x0/0x34()
Calling initcall 0xc03807f0: psmouse_init+0x0/0x94()
input: AT Translated Set 2 keyboard as /class/input/input0
initcall 0xc03807f0: psmouse_init+0x0/0x94() returned 0.
initcall 0xc03807f0 ran for 937 msecs: psmouse_init+0x0/0x94()
Calling initcall 0xc0380884: pcspkr_init+0x0/0x28()
input: PC Speaker as /class/input/input1
input: ImPS/2 Generic Wheel Mouse as /class/input/input2
initcall 0xc0380884: pcspkr_init+0x0/0x28() returned 0.
initcall 0xc0380884 ran for 637 msecs: pcspkr_init+0x0/0x28()
Calling initcall 0xc0380ae4: cmos_init+0x0/0x30()
rtc_cmos: dev (254:0)
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one day
initcall 0xc0380ae4: cmos_init+0x0/0x30() returned 0.
initcall 0xc0380ae4 ran for 16 msecs: cmos_init+0x0/0x30()
Calling initcall 0xc03810cc: i2c_dev_init+0x0/0xbc()
i2c /dev entries driver
initcall 0xc03810cc: i2c_dev_init+0x0/0xbc() returned 0.
initcall 0xc03810cc ran for 5 msecs: i2c_dev_init+0x0/0xbc()
Calling initcall 0xc03812c4: ledtrig_ide_init+0x0/0x34()
initcall 0xc03812c4: ledtrig_ide_init+0x0/0x34() returned 0.
initcall 0xc03812c4 ran for 0 msecs: ledtrig_ide_init+0x0/0x34()
Calling initcall 0xc03812f8: hid_init+0x0/0x8()
initcall 0xc03812f8: hid_init+0x0/0x8() returned 0.
initcall 0xc03812f8 ran for 0 msecs: hid_init+0x0/0x8()
Calling initcall 0xc0381628: sysctl_core_init+0x0/0x28()
initcall 0xc0381628: sysctl_core_init+0x0/0x28() returned 0.
initcall 0xc0381628 ran for 0 msecs: sysctl_core_init+0x0/0x28()
Calling initcall 0xc0381d70: flow_cache_init+0x0/0x150()
initcall 0xc0381d70: flow_cache_init+0x0/0x150() returned 0.
initcall 0xc0381d70 ran for 0 msecs: flow_cache_init+0x0/0x150()
Calling initcall 0xc03820a4: blackhole_module_init+0x0/0x28()
initcall 0xc03820a4: blackhole_module_init+0x0/0x28() returned 0.
initcall 0xc03820a4 ran for 0 msecs: blackhole_module_init+0x0/0x28()
Calling initcall 0xc038380c: sysctl_ipv4_init+0x0/0x48()
initcall 0xc038380c: sysctl_ipv4_init+0x0/0x48() returned 0.
initcall 0xc038380c ran for 0 msecs: sysctl_ipv4_init+0x0/0x48()
Calling initcall 0xc0383b5c: init_syncookies+0x0/0x30()
initcall 0xc0383b5c: init_syncookies+0x0/0x30() returned 0.
initcall 0xc0383b5c ran for 0 msecs: init_syncookies+0x0/0x30()
Calling initcall 0xc0383b8c: xfrm4_beet_init+0x0/0x2c()
initcall 0xc0383b8c: xfrm4_beet_init+0x0/0x2c() returned 0.
initcall 0xc0383b8c ran for 0 msecs: xfrm4_beet_init+0x0/0x2c()
Calling initcall 0xc028f274: ipv4_netfilter_init+0x0/0x28()
initcall 0xc028f274: ipv4_netfilter_init+0x0/0x28() returned 0.
initcall 0xc028f274 ran for 0 msecs: ipv4_netfilter_init+0x0/0x28()
Calling initcall 0xc0383bb8: bictcp_register+0x0/0x28()
TCP bic registered
initcall 0xc0383bb8: bictcp_register+0x0/0x28() returned 0.
initcall 0xc0383bb8 ran for 5 msecs: bictcp_register+0x0/0x28()
Calling initcall 0xc0383e38: af_unix_init+0x0/0x70()
NET: Registered protocol family 1
initcall 0xc0383e38: af_unix_init+0x0/0x70() returned 0.
initcall 0xc0383e38 ran for 6 msecs: af_unix_init+0x0/0x70()
Calling initcall 0xc0383ea8: packet_init+0x0/0x64()
NET: Registered protocol family 17
initcall 0xc0383ea8: packet_init+0x0/0x64() returned 0.
initcall 0xc0383ea8 ran for 5 msecs: packet_init+0x0/0x64()
Calling initcall 0xc0384118: atm_clip_init+0x0/0xc8()
initcall 0xc0384118: atm_clip_init+0x0/0xc8() returned 0.
initcall 0xc0384118 ran for 0 msecs: atm_clip_init+0x0/0xc8()
Calling initcall 0xc036db30: check_cache_coherency+0x0/0x80()
initcall 0xc036db30: check_cache_coherency+0x0/0x80() returned 0.
initcall 0xc036db30 ran for 0 msecs: check_cache_coherency+0x0/0x80()
Calling initcall 0xc001cd9c: init_oops_id+0x0/0x40()
initcall 0xc001cd9c: init_oops_id+0x0/0x40() returned 0.
initcall 0xc001cd9c ran for 0 msecs: init_oops_id+0x0/0x40()
Calling initcall 0xc03733d0: disable_boot_consoles+0x0/0x6c()
initcall 0xc03733d0: disable_boot_consoles+0x0/0x6c() returned 0.
initcall 0xc03733d0 ran for 0 msecs: disable_boot_consoles+0x0/0x6c()
Calling initcall 0xc03744e8: pm_qos_power_init+0x0/0x88()
initcall 0xc03744e8: pm_qos_power_init+0x0/0x88() returned 0.
initcall 0xc03744e8 ran for 0 msecs: pm_qos_power_init+0x0/0x88()
Calling initcall 0xc0379af0: random32_reseed+0x0/0x3c()
initcall 0xc0379af0: random32_reseed+0x0/0x3c() returned 0.
initcall 0xc0379af0 ran for 0 msecs: random32_reseed+0x0/0x3c()
Calling initcall 0xc037a1e8: pci_sysfs_init+0x0/0x70()
initcall 0xc037a1e8: pci_sysfs_init+0x0/0x70() returned 0.
initcall 0xc037a1e8 ran for 0 msecs: pci_sysfs_init+0x0/0x70()
Calling initcall 0xc037ae30: seqgen_init+0x0/0x28()
initcall 0xc037ae30: seqgen_init+0x0/0x28() returned 0.
initcall 0xc037ae30 ran for 0 msecs: seqgen_init+0x0/0x28()
Calling initcall 0xc01d0f10: scsi_complete_async_scans+0x0/0xf0()
initcall 0xc01d0f10: scsi_complete_async_scans+0x0/0xf0() returned 0.
initcall 0xc01d0f10 ran for 0 msecs: scsi_complete_async_scans+0x0/0xf0()
Calling initcall 0xc03808ac: rtc_hctosys+0x0/0x140()
rtc_cmos rtc_cmos: setting system clock to 2008-04-24 19:46:15 UTC (1209066375)
initcall 0xc03808ac: rtc_hctosys+0x0/0x140() returned 0.
initcall 0xc03808ac ran for 6 msecs: rtc_hctosys+0x0/0x140()
Calling initcall 0xc0382de4: tcp_congestion_default+0x0/0xc()
initcall 0xc0382de4: tcp_congestion_default+0x0/0xc() returned 0.
initcall 0xc0382de4 ran for 0 msecs: tcp_congestion_default+0x0/0xc()
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 172k init
Adding 1572880k swap on /dev/hda6.  Priority:-1 extents:1 across:1572880k
EXT3 FS on hda12, internal journal
eth0:  setting full-duplex.
warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
[drm] Setting GART location based on new memory map
[drm] Loading R200 Microcode
[drm] writeback test succeeded in 1 usecs
Bad page state in process 'Xorg'
page:c0e8b200 flags:0x00004000 mapping:00000000 mapcount:0 count:0
Trying to fix it up, but a reboot is needed
Backtrace:
Call Trace:
[d54a9de0] [c0008758] show_stack+0x50/0x184 (unreliable)
[d54a9e00] [c0057e04] bad_page+0x74/0xb8
[d54a9e10] [c0057e94] destroy_compound_page+0x4c/0xe8
[d54a9e30] [c0058378] free_pages_bulk+0xc0/0x254
[d54a9e60] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d54a9e80] [c006c178] __vunmap+0x90/0xd8
[d54a9ea0] [c0177e50] drm_sg_cleanup+0x5c/0x88
[d54a9eb0] [c0173b34] drm_lastclose+0x150/0x2d8
[d54a9ed0] [c0174ca0] drm_release+0x418/0x448
[d54a9ef0] [c007ce34] __fput+0xc0/0x190
[d54a9f10] [c0079b54] filp_close+0x80/0x98
[d54a9f30] [c0079be8] sys_close+0x7c/0xb8
[d54a9f40] [c0010d50] ret_from_syscall+0x0/0x38
--- Exception: c01 at 0xfcf9e5c
    LR = 0xfa37eb8
Unable to handle kernel paging request for data at address 0x00000004
Faulting instruction address: 0xc0057dd4
Oops: Kernel access of bad area, sig: 11 [#1]
AmigaOne
Modules linked in:
NIP: c0057dd4 LR: c0057eb4 CTR: 00000000
REGS: d54a9d50 TRAP: 0300   Tainted: G    B     (2.6.25)
MSR: 00001032 <ME,IR,DR>  CR: 48000422  XER: 00000000
DAR: 00000004, DSISR: 40000000
TASK = d5454ca0[2709] 'Xorg' THREAD: d54a8000
GPR00: 00024000 d54a9e00 d5454ca0 c0e8b220 d5454ca0 00000002 00000000 00024000 
GPR08: 00000000 00000000 00000000 ffffffff 00100100 101dd518 101d5548 101d5824 
GPR16: 101d5544 101d5828 101d56f0 00000000 101d57bc 101e2824 c039cfc4 00000000 
GPR24: 00000001 00000000 00000015 00000000 00000001 c039cf9c c0e8b228 c0e8b220 
NIP [c0057dd4] bad_page+0x44/0xb8
LR [c0057eb4] destroy_compound_page+0x6c/0xe8
Call Trace:
[d54a9e00] [c0057e04] bad_page+0x74/0xb8 (unreliable)
[d54a9e10] [c0057eb4] destroy_compound_page+0x6c/0xe8
[d54a9e30] [c0058378] free_pages_bulk+0xc0/0x254
[d54a9e60] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d54a9e80] [c006c178] __vunmap+0x90/0xd8
[d54a9ea0] [c0177e50] drm_sg_cleanup+0x5c/0x88
[d54a9eb0] [c0173b34] drm_lastclose+0x150/0x2d8
[d54a9ed0] [c0174ca0] drm_release+0x418/0x448
[d54a9ef0] [c007ce34] __fput+0xc0/0x190
[d54a9f10] [c0079b54] filp_close+0x80/0x98
[d54a9f30] [c0079be8] sys_close+0x7c/0xb8
[d54a9f40] [c0010d50] ret_from_syscall+0x0/0x38
--- Exception: c01 at 0xfcf9e5c
    LR = 0xfa37eb8
Instruction dump:
3bc30008 90010014 80e30000 81030010 81630008 3c000002 60004000 7ce90038 
7f890000 7c691b78 40be0008 8123000c <81490004> 3c60c031 392b0001 38840205 
---[ end trace 3439a91ac2314edd ]---
Unable to handle kernel paging request for data at address 0x00000004
Faulting instruction address: 0xc0057dd4
Oops: Kernel access of bad area, sig: 11 [#2]
AmigaOne
Modules linked in:
NIP: c0057dd4 LR: c0057eb4 CTR: 00000000
REGS: d5e3bdb0 TRAP: 0300   Tainted: G    B D   (2.6.25)
MSR: 00001032 <ME,IR,DR>  CR: 44002422  XER: 00000000
DAR: 00000004, DSISR: 40000000
TASK = ef8e2ca0[2125] 'klogd' THREAD: d5e3a000
GPR00: 00024000 d5e3be60 ef8e2ca0 c0e8b240 ef8e2ca0 00000002 00000000 00024000 
GPR08: 00000000 00000000 00000000 ffffffff 00000000 1001d41c 22204422 00000000 
GPR16: 100da2c8 100d0000 100b0000 00000000 00000000 10010000 c039cfc4 00000000 
GPR24: 00000016 c00114b8 0000001e 00000000 00000001 c039cf9c c0e8b248 c0e8b240 
NIP [c0057dd4] bad_page+0x44/0xb8
LR [c0057eb4] destroy_compound_page+0x6c/0xe8
Call Trace:
[d5e3be70] [c0057eb4] destroy_compound_page+0x6c/0xe8
[d5e3be90] [c0058378] free_pages_bulk+0xc0/0x254
[d5e3bec0] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d5e3bee0] [c0014554] pgd_free+0x18/0x28
[d5e3bef0] [c001b424] __mmdrop+0x34/0xa4
[d5e3bf00] [c001971c] finish_task_switch+0x5c/0x9c
[d5e3bf10] [c02a9f28] schedule+0x2b4/0x2e4
[d5e3bf40] [c00114b8] recheck+0x0/0x20
--- Exception: c01 at 0xff51f54
    LR = 0x10002930
Instruction dump:
3bc30008 90010014 80e30000 81030010 81630008 3c000002 60004000 7ce90038 
7f890000 7c691b78 40be0008 8123000c <81490004> 3c60c031 392b0001 38840205 
---[ end trace 3439a91ac2314edd ]---
Unable to handle kernel paging request for data at address 0x00000004
Faulting instruction address: 0xc0057dd4
Oops: Kernel access of bad area, sig: 11 [#3]
AmigaOne
Modules linked in:
NIP: c0057dd4 LR: c0057eb4 CTR: 00000006
REGS: d5e3bb30 TRAP: 0300   Tainted: G    B D   (2.6.25)
MSR: 00001032 <ME,IR,DR>  CR: 42004422  XER: 00000000
DAR: 00000004, DSISR: 40000000
TASK = ef8e2ca0[2125] 'klogd' THREAD: d5e3a000
GPR00: 00024000 d5e3bbe0 ef8e2ca0 c0e8b260 ef8e2ca0 00000002 00000000 00024000 
GPR08: 00000000 00000000 00000000 ffffffff 00100100 1001d41c 22204422 00000000 
GPR16: 100da2c8 100d0000 100b0000 00000000 00000000 10010000 c039cfc4 00000000 
GPR24: d5e3bcd8 10037fff 0000001e 00000000 00000001 c039cf9c c0e8b268 c0e8b260 
NIP [c0057dd4] bad_page+0x44/0xb8
LR [c0057eb4] destroy_compound_page+0x6c/0xe8
Call Trace:
[d5e3bbe0] [0000000a] 0xa (unreliable)
[d5e3bbf0] [c0057eb4] destroy_compound_page+0x6c/0xe8
[d5e3bc10] [c0058378] free_pages_bulk+0xc0/0x254
[d5e3bc40] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d5e3bc60] [c0014504] pte_free+0x5c/0x6c
[d5e3bc70] [c006422c] free_pgd_range+0x12c/0x154
[d5e3bca0] [c0064438] free_pgtables+0x90/0xac
[d5e3bcd0] [c0067468] exit_mmap+0x98/0xec
[d5e3bd00] [c001b4d0] mmput+0x3c/0xd0
[d5e3bd10] [c001f06c] exit_mm+0xc4/0xd8
[d5e3bd30] [c0020864] do_exit+0x1fc/0x630
[d5e3bd70] [c000ed58] kernel_bad_stack+0x0/0x4c
[d5e3bd90] [c00134c0] bad_page_fault+0xb8/0xcc
[d5e3bda0] [c00111f0] handle_page_fault+0x7c/0x80
--- Exception: 300 at bad_page+0x44/0xb8
    LR = destroy_compound_page+0x6c/0xe8
[d5e3be60] [00000000] 0x0 (unreliable)
[d5e3be70] [c0057eb4] destroy_compound_page+0x6c/0xe8
[d5e3be90] [c0058378] free_pages_bulk+0xc0/0x254
[d5e3bec0] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d5e3bee0] [c0014554] pgd_free+0x18/0x28
[d5e3bef0] [c001b424] __mmdrop+0x34/0xa4
[d5e3bf00] [c001971c] finish_task_switch+0x5c/0x9c
[d5e3bf10] [c02a9f28] schedule+0x2b4/0x2e4
[d5e3bf40] [c00114b8] recheck+0x0/0x20
--- Exception: c01 at 0xff51f54
    LR = 0x10002930
Instruction dump:
3bc30008 90010014 80e30000 81030010 81630008 3c000002 60004000 7ce90038 
7f890000 7c691b78 40be0008 8123000c <81490004> 3c60c031 392b0001 38840205 
---[ end trace 3439a91ac2314edd ]---
Fixing recursive fault but reboot is needed!
Unable to handle kernel paging request for data at address 0x00000004
Faulting instruction address: 0xc0057dd4
Oops: Kernel access of bad area, sig: 11 [#4]
AmigaOne
Modules linked in:
NIP: c0057dd4 LR: c0057eb4 CTR: 00000006
REGS: d54a9ad0 TRAP: 0300   Tainted: G    B D   (2.6.25)
MSR: 00001032 <ME,IR,DR>  CR: 42004422  XER: 00000000
DAR: 00000004, DSISR: 40000000
TASK = d5454ca0[2709] 'Xorg' THREAD: d54a8000
GPR00: 00024000 d54a9b80 d5454ca0 c0e8b280 d5454ca0 00000002 00000000 00024000 
GPR08: 00000000 00000000 00000000 ffffffff 0fddc408 101dd518 101d5548 101d5824 
GPR16: 101d5544 101d5828 101d56f0 00000000 101d57bc 101e2824 c039cfc4 00000000 
GPR24: d54a9c78 00102fff 0000001e 00000000 00000001 c039cf9c c0e8b288 c0e8b280 
NIP [c0057dd4] bad_page+0x44/0xb8
LR [c0057eb4] destroy_compound_page+0x6c/0xe8
Call Trace:
[d54a9b80] [c0017bb8] set_next_entity+0x28/0x64 (unreliable)
[d54a9b90] [c0057eb4] destroy_compound_page+0x6c/0xe8
[d54a9bb0] [c0058378] free_pages_bulk+0xc0/0x254
[d54a9be0] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d54a9c00] [c0014504] pte_free+0x5c/0x6c
[d54a9c10] [c006422c] free_pgd_range+0x12c/0x154
[d54a9c40] [c0064438] free_pgtables+0x90/0xac
[d54a9c70] [c0067468] exit_mmap+0x98/0xec
[d54a9ca0] [c001b4d0] mmput+0x3c/0xd0
[d54a9cb0] [c001f06c] exit_mm+0xc4/0xd8
[d54a9cd0] [c0020864] do_exit+0x1fc/0x630
[d54a9d10] [c000ed58] kernel_bad_stack+0x0/0x4c
[d54a9d30] [c00134c0] bad_page_fault+0xb8/0xcc
[d54a9d40] [c00111f0] handle_page_fault+0x7c/0x80
--- Exception: 300 at bad_page+0x44/0xb8
    LR = destroy_compound_page+0x6c/0xe8
[d54a9e00] [c0057e04] bad_page+0x74/0xb8 (unreliable)
[d54a9e10] [c0057eb4] destroy_compound_page+0x6c/0xe8
[d54a9e30] [c0058378] free_pages_bulk+0xc0/0x254
[d54a9e60] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d54a9e80] [c006c178] __vunmap+0x90/0xd8
[d54a9ea0] [c0177e50] drm_sg_cleanup+0x5c/0x88
[d54a9eb0] [c0173b34] drm_lastclose+0x150/0x2d8
[d54a9ed0] [c0174ca0] drm_release+0x418/0x448
[d54a9ef0] [c007ce34] __fput+0xc0/0x190
[d54a9f10] [c0079b54] filp_close+0x80/0x98
[d54a9f30] [c0079be8] sys_close+0x7c/0xb8
[d54a9f40] [c0010d50] ret_from_syscall+0x0/0x38
--- Exception: c01 at 0xfcf9e5c
    LR = 0xfa37eb8
Instruction dump:
3bc30008 90010014 80e30000 81030010 81630008 3c000002 60004000 7ce90038 
7f890000 7c691b78 40be0008 8123000c <81490004> 3c60c031 392b0001 38840205 
---[ end trace 3439a91ac2314edd ]---
Fixing recursive fault but reboot is needed!
Unable to handle kernel paging request for data at address 0x00000004
Faulting instruction address: 0xc0057dd4
Oops: Kernel access of bad area, sig: 11 [#5]
AmigaOne
Modules linked in:
NIP: c0057dd4 LR: c0057eb4 CTR: 00000000
REGS: d5ec7a50 TRAP: 0300   Tainted: G    B D   (2.6.25)
MSR: 00001032 <ME,IR,DR>  CR: 44042422  XER: 00000000
DAR: 00000004, DSISR: 40000000
TASK = ef8f4ca0[2285] 'hald-addon-stor' THREAD: d5ec6000
GPR00: 00024000 d5ec7b00 ef8f4ca0 c0e8b2a0 ef8f4ca0 00000002 00000000 00024000 
GPR08: 00000000 00000000 00000000 ffffffff 00000000 1001c2f0 bf952e14 10000000 
GPR16: 10000000 10000000 10000000 10000000 10015c34 00000000 c039cfc4 00000000 
GPR24: ef876450 00000000 0000001e 00000000 00000001 c039cf9c c0e8b2a8 c0e8b2a0 
NIP [c0057dd4] bad_page+0x44/0xb8
LR [c0057eb4] destroy_compound_page+0x6c/0xe8
Call Trace:
[d5ec7b00] [c02a9b1c] wait_for_common+0xf8/0x1a0 (unreliable)
[d5ec7b10] [c0057eb4] destroy_compound_page+0x6c/0xe8
[d5ec7b30] [c0058378] free_pages_bulk+0xc0/0x254
[d5ec7b60] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d5ec7b80] [c00a5ecc] bio_uncopy_user+0xd0/0x12c
[d5ec7bb0] [c010d754] __blk_rq_unmap_user+0x34/0x4c
[d5ec7bc0] [c010d79c] blk_rq_unmap_user+0x30/0x74
[d5ec7be0] [c0110da4] sg_io+0x3fc/0x41c
[d5ec7c70] [c0111064] scsi_cmd_ioctl+0x2a0/0x568
[d5ec7d10] [c01e38fc] cdrom_ioctl+0x30/0x11cc
[d5ec7d70] [c01c4f9c] idecd_ioctl+0x1a0/0x1f0
[d5ec7dd0] [c010eba8] blkdev_driver_ioctl+0x58/0x70
[d5ec7de0] [c010f38c] blkdev_ioctl+0x7cc/0x850
[d5ec7ec0] [c00a7328] block_ioctl+0x2c/0x3c
[d5ec7ed0] [c008932c] vfs_ioctl+0x38/0x84
[d5ec7ee0] [c00896c8] do_vfs_ioctl+0x350/0x38c
[d5ec7f10] [c0089744] sys_ioctl+0x40/0x70
[d5ec7f40] [c0010d50] ret_from_syscall+0x0/0x38
--- Exception: c01 at 0xfed158c
    LR = 0xfed14f0
Instruction dump:
3bc30008 90010014 80e30000 81030010 81630008 3c000002 60004000 7ce90038 
7f890000 7c691b78 40be0008 8123000c <81490004> 3c60c031 392b0001 38840205 
---[ end trace 3439a91ac2314edd ]---
Unable to handle kernel paging request for data at address 0x00000004
Faulting instruction address: 0xc0057dd4
Oops: Kernel access of bad area, sig: 11 [#6]
AmigaOne
Modules linked in:
NIP: c0057dd4 LR: c0057eb4 CTR: 00000006
REGS: d5ec77d0 TRAP: 0300   Tainted: G    B D   (2.6.25)
MSR: 00001032 <ME,IR,DR>  CR: 42044422  XER: 00000000
DAR: 00000004, DSISR: 40000000
TASK = ef8f4ca0[2285] 'hald-addon-stor' THREAD: d5ec6000
GPR00: 00024000 d5ec7880 ef8f4ca0 c0e8b2c0 ef8f4ca0 00000002 00000000 00024000 
GPR08: 00000000 00000000 00000000 ffffffff 0fe99608 1001c2f0 bf952e14 10000000 
GPR16: 10000000 10000000 10000000 10000000 10015c34 00000000 c039cfc4 00000000 
GPR24: d5ec7978 00102fff 0000001e 00000000 00000001 c039cf9c c0e8b2c8 c0e8b2c0 
NIP [c0057dd4] bad_page+0x44/0xb8
LR [c0057eb4] destroy_compound_page+0x6c/0xe8
Call Trace:
[d5ec7880] [0000000a] 0xa (unreliable)
[d5ec7890] [c0057eb4] destroy_compound_page+0x6c/0xe8
[d5ec78b0] [c0058378] free_pages_bulk+0xc0/0x254
[d5ec78e0] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d5ec7900] [c0014504] pte_free+0x5c/0x6c
[d5ec7910] [c006422c] free_pgd_range+0x12c/0x154
[d5ec7940] [c0064438] free_pgtables+0x90/0xac
[d5ec7970] [c0067468] exit_mmap+0x98/0xec
[d5ec79a0] [c001b4d0] mmput+0x3c/0xd0
[d5ec79b0] [c001f06c] exit_mm+0xc4/0xd8
[d5ec79d0] [c0020864] do_exit+0x1fc/0x630
[d5ec7a10] [c000ed58] kernel_bad_stack+0x0/0x4c
[d5ec7a30] [c00134c0] bad_page_fault+0xb8/0xcc
[d5ec7a40] [c00111f0] handle_page_fault+0x7c/0x80
--- Exception: 300 at bad_page+0x44/0xb8
    LR = destroy_compound_page+0x6c/0xe8
[d5ec7b00] [c02a9b1c] wait_for_common+0xf8/0x1a0 (unreliable)
[d5ec7b10] [c0057eb4] destroy_compound_page+0x6c/0xe8
[d5ec7b30] [c0058378] free_pages_bulk+0xc0/0x254
[d5ec7b60] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d5ec7b80] [c00a5ecc] bio_uncopy_user+0xd0/0x12c
[d5ec7bb0] [c010d754] __blk_rq_unmap_user+0x34/0x4c
[d5ec7bc0] [c010d79c] blk_rq_unmap_user+0x30/0x74
[d5ec7be0] [c0110da4] sg_io+0x3fc/0x41c
[d5ec7c70] [c0111064] scsi_cmd_ioctl+0x2a0/0x568
[d5ec7d10] [c01e38fc] cdrom_ioctl+0x30/0x11cc
[d5ec7d70] [c01c4f9c] idecd_ioctl+0x1a0/0x1f0
[d5ec7dd0] [c010eba8] blkdev_driver_ioctl+0x58/0x70
[d5ec7de0] [c010f38c] blkdev_ioctl+0x7cc/0x850
[d5ec7ec0] [c00a7328] block_ioctl+0x2c/0x3c
[d5ec7ed0] [c008932c] vfs_ioctl+0x38/0x84
[d5ec7ee0] [c00896c8] do_vfs_ioctl+0x350/0x38c
[d5ec7f10] [c0089744] sys_ioctl+0x40/0x70
[d5ec7f40] [c0010d50] ret_from_syscall+0x0/0x38
--- Exception: c01 at 0xfed158c
    LR = 0xfed14f0
Instruction dump:
3bc30008 90010014 80e30000 81030010 81630008 3c000002 60004000 7ce90038 
7f890000 7c691b78 40be0008 8123000c <81490004> 3c60c031 392b0001 38840205 
---[ end trace 3439a91ac2314edd ]---
Fixing recursive fault but reboot is needed!
Unable to handle kernel paging request for data at address 0x00000004
Faulting instruction address: 0xc0057dd4
Oops: Kernel access of bad area, sig: 11 [#7]
AmigaOne
Modules linked in:
NIP: c0057dd4 LR: c0057eb4 CTR: c00c3bbc
REGS: d5fc7db0 TRAP: 0300   Tainted: G    B D   (2.6.25)
MSR: 00001032 <ME,IR,DR>  CR: 48004422  XER: 00000000
DAR: 00000004, DSISR: 40000000
TASK = d5fa2000[2306] 'NetworkManager' THREAD: d5fc6000
GPR00: 00024000 d5fc7e60 d5fa2000 c0e8b2e0 d5fa2000 00000002 00000000 00024000 
GPR08: 00000000 00000000 00000000 ffffffff 00000000 1005fc0c 22224422 00000000 
GPR16: 10065720 10065700 10058bf0 10058c00 00000000 10066ee0 c039cfc4 00000000 
GPR24: 4882fc18 0000000c 0000001e 00000000 00000001 c039cf9c c0e8b2e8 c0e8b2e0 
NIP [c0057dd4] bad_page+0x44/0xb8
LR [c0057eb4] destroy_compound_page+0x6c/0xe8
Call Trace:
[d5fc7e60] [efb64ea0] 0xefb64ea0 (unreliable)
[d5fc7e70] [c0057eb4] destroy_compound_page+0x6c/0xe8
[d5fc7e90] [c0058378] free_pages_bulk+0xc0/0x254
[d5fc7ec0] [c00586e0] free_hot_cold_page+0x1d4/0x20c
[d5fc7ee0] [c00c3c44] sysfs_release+0x88/0xa8
[d5fc7ef0] [c007ce34] __fput+0xc0/0x190
[d5fc7f10] [c0079b54] filp_close+0x80/0x98
[d5fc7f30] [c0079be8] sys_close+0x7c/0xb8
[d5fc7f40] [c0010d50] ret_from_syscall+0x0/0x38
--- Exception: c01 at 0xfefe1b0
    LR = 0xfefe1a0
Instruction dump:
3bc30008 90010014 80e30000 81030010 81630008 3c000002 60004000 7ce90038 
7f890000 7c691b78 40be0008 8123000c <81490004> 3c60c031 392b0001 38840205 
---[ end trace 3439a91ac2314edd ]---

^ permalink raw reply	[flat|nested] 22+ messages in thread

* [2.6.25-rc6] possible regression: X server dying
  2008-04-03 22:49 2.6.25-rc8-git2: Reported regressions from 2.6.24 Rafael J. Wysocki
@ 2008-04-03 23:22 ` Rafael J. Wysocki
  0 siblings, 0 replies; 22+ messages in thread
From: Rafael J. Wysocki @ 2008-04-03 23:22 UTC (permalink / raw)
  To: Linux Kernel Mailing List; +Cc: Dave Airlie, Tilman Schmidt

The following report is on the current list of known regressions
from 2.6.24.  Please verify if the issue is still present in the
mainline.


Bug-Entry	: http://bugzilla.kernel.org/show_bug.cgi?id=10344
Subject		: [2.6.25-rc6] possible regression: X server dying
Submitter	: Tilman Schmidt <tilman@imap.cc>
Date		: 2008-03-24 23:38 (11 days old)
References	: http://lkml.org/lkml/2008/3/24/260
Handled-By	: Dave Airlie <airlied@gmail.com>



^ permalink raw reply	[flat|nested] 22+ messages in thread

end of thread, other threads:[~2008-04-24 20:38 UTC | newest]

Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-03-24 22:38 [2.6.25-rc6] possible regression: X server dying Tilman Schmidt
2008-03-24 23:22 ` Dave Airlie
2008-03-24 23:45   ` Tilman Schmidt
2008-03-25  0:53     ` Dave Airlie
2008-03-26 18:52       ` Pavel Machek
2008-03-31  4:53       ` Dave Airlie
2008-03-31 17:45         ` Mark Lord
2008-04-01  9:02         ` Tilman Schmidt
2008-04-06  7:44           ` Dave Airlie
2008-04-06 14:34             ` Gerhard Pircher
2008-04-07 22:27               ` Dave Airlie
2008-04-08 21:01                 ` Guennadi Liakhovetski
2008-04-09  8:54                   ` Gerhard Pircher
2008-04-24 16:40                     ` Oliver Pinter
2008-04-24 20:37                       ` Gerhard Pircher
2008-04-24 16:03                   ` Guennadi Liakhovetski
2008-04-19 11:30             ` [2.6.25] X server dying due to lock not being held Gerhard Pircher
2008-04-07 22:22           ` [2.6.25-rc6] possible regression: X server dying Tilman Schmidt
2008-04-07 22:55             ` Ray Lee
2008-04-09 11:57               ` Tilman Schmidt
2008-04-14  1:02               ` Tilman Schmidt
2008-04-03 22:49 2.6.25-rc8-git2: Reported regressions from 2.6.24 Rafael J. Wysocki
2008-04-03 23:22 ` [2.6.25-rc6] possible regression: X server dying Rafael J. Wysocki

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).