Hi,

i've mailed before to lkml and Andrew Paprocki (2008-03-12) directly.
But the original patch wasn't changed. Here's a patch to correct the
error.

Description of the error:
By introducing the support of 16 Bit timer values for later it8712 an
error was made. The value is stored through superio_outw() which cause,
that the upper Byte is in the Register called "Watch Dog Timer Time-Out
Value (LSB) Register" and the lower in "Watch Dog Timer Time-Out Value
(MSB) Register".

A common value is 60: stored this way the watchdog timer runs out
in 4h 16mins. In case of a deadlocked server this is a long time to
wait, before the service comes back!

Regards,
Oliver

Wim Van Sebroeck schrieb:
> Hi Oliver,
> 
>> this patch can cause serious problems in the case, that someone use it 
>> with an it8712 rev. 8 and above.
> ...
>> Your patch changes it8712f_wdt.c in function t8712f_wdt_update_margin():
>>
>>> -	superio_outb((margin > 255) ? (margin / 60) : margin, WDT_TIMEOUT);
>>> +	if (revision >= 0x08)
>>> +		superio_outw(units, WDT_TIMEOUT);
>>> +	else
>>> +		superio_outb(units, WDT_TIMEOUT);
>> but here you can't use superio_outw, because the bytes are swapped 
>> --historical reason.
>>
>> I suggest to substitute
>> 	superio_outw(units, WDT_TIMEOUT);
>> with
>> 	superio_outb(units >> 8, WDT_TIMEOUT + 1);
>> 	superio_outb(units, WDT_TIMEOUT);
>>
> 
> Can you keep "Andrew Paprocki" <andrew@ishiboo.com> in the loop?
> Can you also create a patch and test it together with Andrew?
> We need to make sure that we fix this before 2.6.25 is there.
> 
> Thanks,
> Wim