LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Vignesh R <vigneshr@ti.com>
To: "Kwiatkowski, Arkadiusz" <arkadiusz.kwiatkowski@aptiv.com>,
"broonie@kernel.org" <broonie@kernel.org>
Cc: "linux-spi@vger.kernel.org" <linux-spi@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH] Fixes in TI QSPI driver to allow more than one flash chip
Date: Tue, 27 Mar 2018 09:30:11 +0530 [thread overview]
Message-ID: <496c162d-5e3c-e008-a14b-6b990e253e64@ti.com> (raw)
In-Reply-To: <0ece6261f37a424cbde7122907548a9f@CO1PR6802MB0085.017d.mgd.msft.net>
On Thursday 22 March 2018 06:03 PM, Kwiatkowski, Arkadiusz wrote:
> Add checking for which SPI device was memory-mapped to allow more than
> one flash device being used on QSPI bus. Fix parameters order in
> regmap_update_bits calls.
>
> Signed-off-by: Arkadiusz Kwiatkowski <arkadiusz.kwiatkowski@aptiv.com>
> ---
Thanks for the patch! Fixes are legitimate but,
Your mailer has grabbled the patch (especially white spaces). Please use
git send-email to send patches.
Run scripts/checkpatch.pl --strict on the patch for kernel coding style
checks.
Please look at git log drivers/spi/spi-ti-qspi.c and fix up $subject
accordingly. Split this patch into two: One fixing up
regmap_update_bits() call and other fixing up mmap setup for more than
one CS.
> drivers/spi/spi-ti-qspi.c | 22 +++++++++++++---------
> 1 file changed, 13 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c
> index c24d9b4..3d1dc4f 100644
> --- a/drivers/spi/spi-ti-qspi.c
> +++ b/drivers/spi/spi-ti-qspi.c
> @@ -66,7 +66,7 @@ struct ti_qspi {
> u32 cmd;
> u32 dc;
>
> -bool mmap_enabled;
> +struct spi_device*mmap_spi_device;
> };
>
> #define QSPI_PID(0x0)
> @@ -490,10 +490,10 @@ static void ti_qspi_enable_memory_map(struct
> spi_device *spi)
> ti_qspi_write(qspi, MM_SWITCH, QSPI_SPI_SWITCH_REG);
> if (qspi->ctrl_base) {
> regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
> - MEM_CS_EN(spi->chip_select),
> - MEM_CS_MASK);
> + MEM_CS_MASK,
> + MEM_CS_EN(spi->chip_select));
> }
> -qspi->mmap_enabled = true;
> +qspi->mmap_spi_device = spi;
> }
>
> static void ti_qspi_disable_memory_map(struct spi_device *spi)
> @@ -503,8 +503,8 @@ static void ti_qspi_disable_memory_map(struct
> spi_device *spi)
> ti_qspi_write(qspi, 0, QSPI_SPI_SWITCH_REG);
> if (qspi->ctrl_base)
> regmap_update_bits(qspi->ctrl_base, qspi->ctrl_reg,
> - 0, MEM_CS_MASK);
> -qspi->mmap_enabled = false;
> + MEM_CS_MASK, 0);
> +qspi->mmap_spi_device = NULL;
> }
>
> static void ti_qspi_setup_mmap_read(struct spi_device *spi,
> @@ -544,8 +544,12 @@ static int ti_qspi_spi_flash_read(struct spi_device
> *spi,
>
> mutex_lock(&qspi->list_lock);
>
> -if (!qspi->mmap_enabled)
> +if (qspi->mmap_spi_device != spi) {
> +if (qspi->mmap_spi_device != NULL)
> +ti_qspi_disable_memory_map(qspi->mmap_spi_device);
> ti_qspi_enable_memory_map(spi);
> +}
> +
> ti_qspi_setup_mmap_read(spi, msg);
>
> if (qspi->rx_chan) {
> @@ -600,7 +604,7 @@ static int ti_qspi_start_transfer_one(struct
> spi_master *master,
>
> mutex_lock(&qspi->list_lock);
>
> -if (qspi->mmap_enabled)
> +if (qspi->mmap_spi_device != NULL)
> ti_qspi_disable_memory_map(spi);
>
> list_for_each_entry(t, &m->transfers, transfer_list) {
> @@ -787,7 +791,7 @@ static int ti_qspi_probe(struct platform_device *pdev)
> master->spi_flash_read = NULL;
> }
> }
> -qspi->mmap_enabled = false;
> +qspi->mmap_spi_device = NULL;
>
> ret = devm_spi_register_master(&pdev->dev, master);
> if (!ret)
> --
> 2.7.4
> ****************************************************************************************
> Note: If the reader of this message is not the intended recipient, or an
> employee or agent responsible for delivering this message to the
> intended recipient, you are hereby notified that any dissemination,
> distribution or copying of this communication is strictly prohibited. If
> you have received this communication in error, please notify us
> immediately by replying to the message and deleting it from your
> computer. Thank you.
> ****************************************************************************************
--
Regards
Vignesh
next prev parent reply other threads:[~2018-03-27 3:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-22 12:33 Kwiatkowski, Arkadiusz
2018-03-27 4:00 ` Vignesh R [this message]
2018-03-30 9:41 ` [PATCH v2 1/2] spi: spi-ti-qspi: Fix parameters order in regmap_update_bits calls Arkadiusz Kwiatkowski
2018-03-30 9:41 ` [PATCH v2 2/2] spi: spi-ti-qspi: Add checking which flash chip has been mmap-ed Arkadiusz Kwiatkowski
2018-04-03 6:03 ` [PATCH v2 1/2] spi: spi-ti-qspi: Fix parameters order in regmap_update_bits calls Vignesh R
2018-04-03 9:09 ` Mark Brown
2018-04-16 16:58 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=496c162d-5e3c-e008-a14b-6b990e253e64@ti.com \
--to=vigneshr@ti.com \
--cc=arkadiusz.kwiatkowski@aptiv.com \
--cc=broonie@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-spi@vger.kernel.org \
--subject='Re: [PATCH] Fixes in TI QSPI driver to allow more than one flash chip' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).