LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
To: Jernej Skrabec <jernej.skrabec@gmail.com>, linux-media@vger.kernel.org
Cc: ezequiel@vanguardiasur.com.ar, nicolas.dufresne@collabora.com,
	mchehab@kernel.org, robh+dt@kernel.org, mripard@kernel.org,
	wens@csie.org, p.zabel@pengutronix.de,
	gregkh@linuxfoundation.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org,
	linux-staging@lists.linux.dev
Subject: Re: [PATCH 3/7] media: hantro: vp9: add support for legacy register set
Date: Tue, 23 Nov 2021 13:06:26 +0100	[thread overview]
Message-ID: <506e6056-6806-cbb0-271f-66a6512429fb@collabora.com> (raw)
In-Reply-To: <20211122184702.768341-4-jernej.skrabec@gmail.com>

Hi Jernej,

W dniu 22.11.2021 o 19:46, Jernej Skrabec pisze:
> Some older G2 cores uses slightly different register set for HEVC and
> VP9. Since vast majority of registers and logic is the same, it doesn't
> make sense to introduce another drivers.
> 
> Add legacy_regs quirk and implement only VP9 changes for now. HEVC
> changes will be introduced later, if needed.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> ---
>   drivers/staging/media/hantro/hantro.h         |  2 +
>   drivers/staging/media/hantro/hantro_g2_regs.h | 19 +++++
>   .../staging/media/hantro/hantro_g2_vp9_dec.c  | 74 ++++++++++++++-----
>   3 files changed, 78 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/staging/media/hantro/hantro.h b/drivers/staging/media/hantro/hantro.h
> index d03824fa3222..83ed25d9657b 100644
> --- a/drivers/staging/media/hantro/hantro.h
> +++ b/drivers/staging/media/hantro/hantro.h
> @@ -74,6 +74,7 @@ struct hantro_irq {
>    * @reg_names:			array of register range names
>    * @num_regs:			number of register range names in the array
>    * @double_buffer:		core needs double buffering
> + * @legacy_regs:		core uses legacy register set
>    */
>   struct hantro_variant {
>   	unsigned int enc_offset;
> @@ -96,6 +97,7 @@ struct hantro_variant {
>   	const char * const *reg_names;
>   	int num_regs;
>   	unsigned int double_buffer : 1;
> +	unsigned int legacy_regs : 1;
>   };
>   
>   /**
> diff --git a/drivers/staging/media/hantro/hantro_g2_regs.h b/drivers/staging/media/hantro/hantro_g2_regs.h
> index 15a391a4650e..d7c2ff05208e 100644
> --- a/drivers/staging/media/hantro/hantro_g2_regs.h
> +++ b/drivers/staging/media/hantro/hantro_g2_regs.h
> @@ -37,6 +37,13 @@
>   
>   #define g2_strm_swap		G2_DEC_REG(2, 28, 0xf)
>   #define g2_dirmv_swap		G2_DEC_REG(2, 20, 0xf)
> +/* used on older variants */
> +#define g2_strm_swap_old	G2_DEC_REG(2, 27, 0x1f)
> +#define g2_pic_swap		G2_DEC_REG(2, 22, 0x1f)
> +#define g2_dirmv_swap_old	G2_DEC_REG(2, 17, 0x1f)
> +#define g2_tab0_swap		G2_DEC_REG(2, 12, 0x1f)
> +#define g2_tab1_swap		G2_DEC_REG(2, 7, 0x1f)
> +#define g2_tab2_swap		G2_DEC_REG(2, 2, 0x1f)\

Please rename g2_tab[0-2]_swap to g2_tab[0-2]_swap_old. Similar names
exist in newer variants (even if not used at the moment).

It is rather difficult to come up with a consistent rule with regard
to in what sequence to arrange these register definitions. It seems
to me that you use a hybrid approach: if the definitions being added
fall "out of order" then you annotate with a comment about older variants,
and if they are "in order" then you simply fold them into their place.

I don't have a very strong opinion, but maybe they all should be
just "in bitfield order" and without comments?

>   
>   #define g2_mode			G2_DEC_REG(3, 27, 0x1f)
>   #define g2_compress_swap	G2_DEC_REG(3, 20, 0xf)
> @@ -45,6 +52,8 @@
>   #define g2_out_dis		G2_DEC_REG(3, 15, 0x1)
>   #define g2_out_filtering_dis	G2_DEC_REG(3, 14, 0x1)
>   #define g2_write_mvs_e		G2_DEC_REG(3, 12, 0x1)
> +#define g2_tab3_swap		G2_DEC_REG(3, 7, 0x1f)

g2_tab3_swap_old

With all the above addressed you can add my

Reviewied-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>

> +#define g2_rscan_swap		G2_DEC_REG(3, 2, 0x1f)
>   
>   #define g2_pic_width_in_cbs	G2_DEC_REG(4, 19, 0x1fff)
>   #define g2_pic_height_in_cbs	G2_DEC_REG(4, 6,  0x1fff)
> @@ -58,6 +67,7 @@
>   #define g2_tempor_mvp_e		G2_DEC_REG(5, 11, 0x1)
>   #define g2_max_cu_qpd_depth	G2_DEC_REG(5, 5,  0x3f)
>   #define g2_cu_qpd_e		G2_DEC_REG(5, 4,  0x1)
> +#define g2_pix_shift		G2_DEC_REG(5, 0,  0xf)
>   
>   #define g2_stream_len		G2_DEC_REG(6, 0,  0xffffffff)
>   
> @@ -80,6 +90,8 @@
>   
>   #define g2_const_intra_e	G2_DEC_REG(8, 31, 0x1)
>   #define g2_filt_ctrl_pres	G2_DEC_REG(8, 30, 0x1)
> +#define g2_bit_depth_y		G2_DEC_REG(8, 21, 0xf)
> +#define g2_bit_depth_c		G2_DEC_REG(8, 17, 0xf)
>   #define g2_idr_pic_e		G2_DEC_REG(8, 16, 0x1)
>   #define g2_bit_depth_pcm_y	G2_DEC_REG(8, 12, 0xf)
>   #define g2_bit_depth_pcm_c	G2_DEC_REG(8, 8,  0xf)
> @@ -87,6 +99,9 @@
>   #define g2_bit_depth_c_minus8	G2_DEC_REG(8, 4,  0x3)
>   #define g2_output_8_bits	G2_DEC_REG(8, 3,  0x1)
>   #define g2_output_format	G2_DEC_REG(8, 0,  0x7)
> +/* used on older variants */
> +#define g2_rs_out_bit_depth	G2_DEC_REG(8, 4,  0xf)
> +#define g2_pp_pix_shift		G2_DEC_REG(8, 0,  0xf)
>   
>   #define g2_refidx1_active	G2_DEC_REG(9, 19, 0x1f)
>   #define g2_refidx0_active	G2_DEC_REG(9, 14, 0x1f)
> @@ -98,6 +113,10 @@
>   #define g2_num_tile_rows	G2_DEC_REG(10, 14, 0x1f)
>   #define g2_tile_e		G2_DEC_REG(10, 1,  0x1)
>   #define g2_entropy_sync_e	G2_DEC_REG(10, 0,  0x1)
> +/* used on older variants */
> +#define g2_init_qp_old		G2_DEC_REG(10, 25, 0x3f)
> +#define g2_num_tile_cols_old	G2_DEC_REG(10, 20, 0x1f)
> +#define g2_num_tile_rows_old	G2_DEC_REG(10, 15, 0x1f)
>   
>   #define vp9_transform_mode	G2_DEC_REG(11, 27, 0x7)
>   #define vp9_filt_sharpness	G2_DEC_REG(11, 21, 0x7)
> diff --git a/drivers/staging/media/hantro/hantro_g2_vp9_dec.c b/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
> index d4fc649a4da1..5aac32700cd0 100644
> --- a/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
> +++ b/drivers/staging/media/hantro/hantro_g2_vp9_dec.c
> @@ -150,7 +150,8 @@ static void config_output(struct hantro_ctx *ctx,
>   	dma_addr_t luma_addr, chroma_addr, mv_addr;
>   
>   	hantro_reg_write(ctx->dev, &g2_out_dis, 0);
> -	hantro_reg_write(ctx->dev, &g2_output_format, 0);
> +	if (!ctx->dev->variant->legacy_regs)
> +		hantro_reg_write(ctx->dev, &g2_output_format, 0);
>   
>   	luma_addr = hantro_get_dec_buf_addr(ctx, &dst->base.vb.vb2_buf);
>   	hantro_write_addr(ctx->dev, G2_OUT_LUMA_ADDR, luma_addr);
> @@ -327,6 +328,7 @@ config_tiles(struct hantro_ctx *ctx,
>   	struct hantro_aux_buf *tile_edge = &vp9_ctx->tile_edge;
>   	dma_addr_t addr;
>   	unsigned short *tile_mem;
> +	unsigned int rows, cols;
>   
>   	addr = misc->dma + vp9_ctx->tile_info_offset;
>   	hantro_write_addr(ctx->dev, G2_TILE_SIZES_ADDR, addr);
> @@ -344,17 +346,24 @@ config_tiles(struct hantro_ctx *ctx,
>   
>   		fill_tile_info(ctx, tile_r, tile_c, sbs_r, sbs_c, tile_mem);
>   
> +		cols = tile_c;
> +		rows = tile_r;
>   		hantro_reg_write(ctx->dev, &g2_tile_e, 1);
> -		hantro_reg_write(ctx->dev, &g2_num_tile_cols, tile_c);
> -		hantro_reg_write(ctx->dev, &g2_num_tile_rows, tile_r);
> -
>   	} else {
>   		tile_mem[0] = hantro_vp9_num_sbs(dst->vp9.width);
>   		tile_mem[1] = hantro_vp9_num_sbs(dst->vp9.height);
>   
> +		cols = 1;
> +		rows = 1;
>   		hantro_reg_write(ctx->dev, &g2_tile_e, 0);
> -		hantro_reg_write(ctx->dev, &g2_num_tile_cols, 1);
> -		hantro_reg_write(ctx->dev, &g2_num_tile_rows, 1);
> +	}
> +
> +	if (ctx->dev->variant->legacy_regs) {
> +		hantro_reg_write(ctx->dev, &g2_num_tile_cols_old, cols);
> +		hantro_reg_write(ctx->dev, &g2_num_tile_rows_old, rows);
> +	} else {
> +		hantro_reg_write(ctx->dev, &g2_num_tile_cols, cols);
> +		hantro_reg_write(ctx->dev, &g2_num_tile_rows, rows);
>   	}
>   
>   	/* provide aux buffers even if no tiles are used */
> @@ -505,8 +514,22 @@ static void config_picture_dimensions(struct hantro_ctx *ctx, struct hantro_deco
>   static void
>   config_bit_depth(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_frame *dec_params)
>   {
> -	hantro_reg_write(ctx->dev, &g2_bit_depth_y_minus8, dec_params->bit_depth - 8);
> -	hantro_reg_write(ctx->dev, &g2_bit_depth_c_minus8, dec_params->bit_depth - 8);
> +	if (ctx->dev->variant->legacy_regs) {
> +		u8 pp_shift = 0;
> +
> +		hantro_reg_write(ctx->dev, &g2_bit_depth_y, dec_params->bit_depth);
> +		hantro_reg_write(ctx->dev, &g2_bit_depth_c, dec_params->bit_depth);
> +		hantro_reg_write(ctx->dev, &g2_rs_out_bit_depth, dec_params->bit_depth);
> +
> +		if (dec_params->bit_depth > 8)
> +			pp_shift = 16 - dec_params->bit_depth;
> +
> +		hantro_reg_write(ctx->dev, &g2_pp_pix_shift, pp_shift);
> +		hantro_reg_write(ctx->dev, &g2_pix_shift, 0);
> +	} else {
> +		hantro_reg_write(ctx->dev, &g2_bit_depth_y_minus8, dec_params->bit_depth - 8);
> +		hantro_reg_write(ctx->dev, &g2_bit_depth_c_minus8, dec_params->bit_depth - 8);
> +	}
>   }
>   
>   static inline bool is_lossless(const struct v4l2_vp9_quantization *quant)
> @@ -784,9 +807,13 @@ config_source(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_frame *dec_para
>   		     + dec_params->compressed_header_size;
>   
>   	stream_base = vb2_dma_contig_plane_dma_addr(&vb2_src->vb2_buf, 0);
> -	hantro_write_addr(ctx->dev, G2_STREAM_ADDR, stream_base);
>   
>   	tmp_addr = stream_base + headres_size;
> +	if (ctx->dev->variant->legacy_regs)
> +		hantro_write_addr(ctx->dev, G2_STREAM_ADDR, (tmp_addr & ~0xf));
> +	else
> +		hantro_write_addr(ctx->dev, G2_STREAM_ADDR, stream_base);
> +
>   	start_bit = (tmp_addr & 0xf) * 8;
>   	hantro_reg_write(ctx->dev, &g2_start_bit, start_bit);
>   
> @@ -794,10 +821,12 @@ config_source(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_frame *dec_para
>   	src_len += start_bit / 8 - headres_size;
>   	hantro_reg_write(ctx->dev, &g2_stream_len, src_len);
>   
> -	tmp_addr &= ~0xf;
> -	hantro_reg_write(ctx->dev, &g2_strm_start_offset, tmp_addr - stream_base);
> -	src_buf_len = vb2_plane_size(&vb2_src->vb2_buf, 0);
> -	hantro_reg_write(ctx->dev, &g2_strm_buffer_len, src_buf_len);
> +	if (!ctx->dev->variant->legacy_regs) {
> +		tmp_addr &= ~0xf;
> +		hantro_reg_write(ctx->dev, &g2_strm_start_offset, tmp_addr - stream_base);
> +		src_buf_len = vb2_plane_size(&vb2_src->vb2_buf, 0);
> +		hantro_reg_write(ctx->dev, &g2_strm_buffer_len, src_buf_len);
> +	}
>   }
>   
>   static void
> @@ -837,13 +866,24 @@ config_registers(struct hantro_ctx *ctx, const struct v4l2_ctrl_vp9_frame *dec_p
>   
>   	/* configure basic registers */
>   	hantro_reg_write(ctx->dev, &g2_mode, VP9_DEC_MODE);
> -	hantro_reg_write(ctx->dev, &g2_strm_swap, 0xf);
> -	hantro_reg_write(ctx->dev, &g2_dirmv_swap, 0xf);
> -	hantro_reg_write(ctx->dev, &g2_compress_swap, 0xf);
> +	if (!ctx->dev->variant->legacy_regs) {
> +		hantro_reg_write(ctx->dev, &g2_strm_swap, 0xf);
> +		hantro_reg_write(ctx->dev, &g2_dirmv_swap, 0xf);
> +		hantro_reg_write(ctx->dev, &g2_compress_swap, 0xf);
> +		hantro_reg_write(ctx->dev, &g2_ref_compress_bypass, 1);
> +	} else {
> +		hantro_reg_write(ctx->dev, &g2_strm_swap_old, 0x1f);
> +		hantro_reg_write(ctx->dev, &g2_pic_swap, 0x10);
> +		hantro_reg_write(ctx->dev, &g2_dirmv_swap_old, 0x10);
> +		hantro_reg_write(ctx->dev, &g2_tab0_swap, 0x10);
> +		hantro_reg_write(ctx->dev, &g2_tab1_swap, 0x10);
> +		hantro_reg_write(ctx->dev, &g2_tab2_swap, 0x10);
> +		hantro_reg_write(ctx->dev, &g2_tab3_swap, 0x10);
> +		hantro_reg_write(ctx->dev, &g2_rscan_swap, 0x10);
> +	}
>   	hantro_reg_write(ctx->dev, &g2_buswidth, BUS_WIDTH_128);
>   	hantro_reg_write(ctx->dev, &g2_max_burst, 16);
>   	hantro_reg_write(ctx->dev, &g2_apf_threshold, 8);
> -	hantro_reg_write(ctx->dev, &g2_ref_compress_bypass, 1);
>   	hantro_reg_write(ctx->dev, &g2_clk_gate_e, 1);
>   	hantro_reg_write(ctx->dev, &g2_max_cb_size, 6);
>   	hantro_reg_write(ctx->dev, &g2_min_cb_size, 3);
> 


  reply	other threads:[~2021-11-23 12:06 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-22 18:46 [PATCH 0/7] media: hantro: add Allwinner H6 support Jernej Skrabec
2021-11-22 18:46 ` [PATCH 1/7] media: hantro: add support for reset lines Jernej Skrabec
2021-11-23 11:09   ` Andrzej Pietrasiewicz
2021-11-23 14:59     ` Dan Carpenter
2021-11-23 16:36       ` Andrzej Pietrasiewicz
2021-11-23 16:46         ` Jernej Škrabec
     [not found]           ` <CAAEAJfD3d4zjwvbv967+oe6awnAkZiGNKroYF5jvoTy=0sn+Pw@mail.gmail.com>
2021-11-30 10:39             ` Andrzej Pietrasiewicz
2021-11-22 18:46 ` [PATCH 2/7] media: hantro: vp9: use double buffering if needed Jernej Skrabec
2021-11-23 11:22   ` Andrzej Pietrasiewicz
2021-11-22 18:46 ` [PATCH 3/7] media: hantro: vp9: add support for legacy register set Jernej Skrabec
2021-11-23 12:06   ` Andrzej Pietrasiewicz [this message]
2021-11-22 18:46 ` [PATCH 4/7] media: hantro: move postproc enablement for old cores Jernej Skrabec
2021-11-23 12:12   ` Andrzej Pietrasiewicz
2021-11-25 12:00   ` Ezequiel Garcia
2021-11-25 19:21     ` Jernej Škrabec
2021-11-22 18:47 ` [PATCH 5/7] media: dt-bindings: allwinner: document H6 Hantro G2 binding Jernej Skrabec
2021-11-22 18:47 ` [PATCH 6/7] media: hantro: Add support for Allwinner H6 Jernej Skrabec
2021-11-23 12:23   ` Andrzej Pietrasiewicz
2021-11-22 18:47 ` [PATCH 7/7] arm64: dts: allwinner: h6: Add Hantro G2 node Jernej Skrabec
2021-11-22 18:51 ` [PATCH 0/7] media: hantro: add Allwinner H6 support Jernej Škrabec

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=506e6056-6806-cbb0-271f-66a6512429fb@collabora.com \
    --to=andrzej.p@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=ezequiel@vanguardiasur.com.ar \
    --cc=gregkh@linuxfoundation.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-staging@lists.linux.dev \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=mchehab@kernel.org \
    --cc=mripard@kernel.org \
    --cc=nicolas.dufresne@collabora.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh+dt@kernel.org \
    --cc=wens@csie.org \
    --subject='Re: [PATCH 3/7] media: hantro: vp9: add support for legacy register set' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).