Re: [PATCH v4 8/8] iio: Add ABI documentation for input current readings

[Jonathan Cameron <jic23@kernel.org>]

On 25/11/14 18:25, Adam Thomson wrote:
> Add information on in_current related readings.
> 
> Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
This one stands on it's own to applied (with some fuzz and tiny
bit of rearranging) to the togreg branch of iio.git - initially pushed
out as testing for the autobuilders to play with it.

Thanks,

Jonathan
> ---
>  Documentation/ABI/testing/sysfs-bus-iio | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
> index d760b02..37cd4d4 100644
> --- a/Documentation/ABI/testing/sysfs-bus-iio
> +++ b/Documentation/ABI/testing/sysfs-bus-iio
> @@ -92,6 +92,18 @@ Description:
>  		is required is a consistent labeling.  Units after application
>  		of scale and offset are millivolts.
> 
> +What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_raw
> +What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_raw
> +KernelVersion:	3.17
> +Contact:	linux-iio@vger.kernel.org
> +Description:
> +		Raw (unscaled no bias removal etc.) current measurement from
> +		channel Y. In special cases where the channel does not
> +		correspond to externally available input one of the named
> +		versions may be used. The number must always be specified and
> +		unique to allow association with event codes. Units after
> +		application of scale and offset are milliamps.
> +
>  What:		/sys/bus/iio/devices/iio:deviceX/in_capacitanceY_raw
>  KernelVersion:	3.2
>  Contact:	linux-iio@vger.kernel.org
> @@ -227,6 +239,8 @@ What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_offset
>  What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_offset
>  What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_offset
>  What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_offset
> +What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_offset
> +What:		/sys/bus/iio/devices/iio:deviceX/in_current_offset
>  What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_offset
>  What:		/sys/bus/iio/devices/iio:deviceX/in_temp_offset
>  What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_offset
> @@ -249,8 +263,11 @@ Description:
>  		to the _raw output.
> 
>  What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_scale
> +What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_scale
>  What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
> +What:		/sys/bus/iio/devices/iio:deviceX/in_currentY_supply_scale
>  What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_scale
> +What:		/sys/bus/iio/devices/iio:deviceX/in_current_scale
>  What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
>  What:		/sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
>  What:		/sys/bus/iio/devices/iio:deviceX/in_accel_scale
> --
> 1.9.3
>