LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Chanwoo Choi <cw00.choi@samsung.com>
To: Chanwoo Choi <cw00.choi@samsung.com>
Cc: myungjoo.ham@samsung.com, kgene@kernel.org,
	kyungmin.park@samsung.com, rafael.j.wysocki@intel.com,
	mark.rutland@arm.com, a.kesavan@samsung.com,
	tomasz.figa@gmail.com, k.kozlowski@samsung.com,
	b.zolnierkie@samsung.com, robh+dt@kernel.org,
	inki.dae@samsung.com, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org,
	Jonghwan Choi <jhbird.choi@samsung.com>
Subject: Re: [PATCHv8 7/9] ARM: dts: Add PPMU dt node for Exynos5260 SoC
Date: Mon, 19 Jan 2015 19:01:40 +0900	[thread overview]
Message-ID: <54BCD604.3030105@samsung.com> (raw)
In-Reply-To: <1421066097-26237-8-git-send-email-cw00.choi@samsung.com>

Dear all,

I'll drop this patch because I can't test it on Exynos5260-based board.

Best Regards,
Chanwoo Choi

On 01/12/2015 09:34 PM, Chanwoo Choi wrote:
> This patch adds PPMU (Performance Profiling Monitoring Unit) dt node
> Exynos5260 SoC.
> 
> Exynos5260 SoC has following PPMU IPs:
> - PPMU_DREX0_S0 0x10c60000
> - PPMU_DREX0_S1 0x10c70000
> - PPMU_DREX1_S0 0x10c80000
> - PPMU_DREX1_S1 0x10c90000
> - PPMU_EAGLE    0x10cc0000
> - PPMU_KFC      0x10cd0000
> - PPMU_MFC      0x11040000
> - PPMU_G3D      0x11880000
> - PPMU_FSYS     0x12220000
> - PPMU_ISP      0x13370000
> - PPMU_FICM     0x13cb0000
> - PPMU_GSCL     0x13e60000
> - PPMU_MSCL     0x13ee0000
> - PPMU_FIMD0X   0x145b0000
> - PPMU_FIMD1X   0x145c0000
> 
> The drivers/devfreq/exynos/exynos5_bus.c supports the memory bus frequency/
> voltage scaling of Exynos5260 SoC with DEVFREQ framework.
> 
> Cc: Kukjin Kim <kgene@kernel.org>
> Cc: Abhilash Kesavan <a.kesavan@samsung.com>
> Cc: Jonghwan Choi <jhbird.choi@samsung.com>
> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
> ---
>  arch/arm/boot/dts/exynos5260.dtsi | 90 +++++++++++++++++++++++++++++++++++++++
>  1 file changed, 90 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
> index 36da38e..26f3074 100644
> --- a/arch/arm/boot/dts/exynos5260.dtsi
> +++ b/arch/arm/boot/dts/exynos5260.dtsi
> @@ -307,6 +307,96 @@
>  			fifo-depth = <64>;
>  			status = "disabled";
>  		};
> +
> +		ppmu_drex0_s0: ppmu_drex0_s0@10c60000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x10c60000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_drex0_s1: ppmu_drex0_s1@10c70000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x10c70000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_drex1_s0: ppmu_drex1_s0@10c80000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x10c80000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_drex1_s1: ppmu_drex1_s1@10c90000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x10c90000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_eagle: ppmu_eagle@10cc0000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x10cc0000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_kfc: ppmu_kfc@10cd0000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x10cd0000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_mfc: ppmu_mfc@11040000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x11040000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_g3d: ppmu_g3d@11880000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x11880000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_fsys: ppmu_fsys@12220000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x12220000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_isp: ppmu_isp@13370000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x13370000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_fimc: ppmu_fimc@13cb0000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x13cb0000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_gscl: ppmu_gscl@13e60000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x13e60000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_mscl: ppmu_gscl@13ee0000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x13ee0000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_fimd0x: ppmu_fimd0x@145b0000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x145b0000 0x2000>;
> +			status = "disabled";
> +		};
> +
> +		ppmu_fimd1x: ppmu_fimd1x@145c0000 {
> +			compatible = "samsung,exynos-ppmu";
> +			reg = <0x145c0000 0x2000>;
> +			status = "disabled";
> +		};
>  	};
>  };
>  
> 


  reply	other threads:[~2015-01-19 10:01 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-12 12:34 [PATCHv8 0/9] devfreq: Add devfreq-event class to provide raw data for devfreq device Chanwoo Choi
2015-01-12 12:34 ` [PATCHv8 1/9] devfreq: event: Add new devfreq_event class to provide basic data for devfreq governor Chanwoo Choi
2015-01-19 10:12   ` Chanwoo Choi
2015-01-12 12:34 ` [PATCHv8 2/9] devfreq: event: Add resource-managed function for devfreq-event device Chanwoo Choi
2015-01-12 12:34 ` [PATCHv8 3/9] devfreq: event: Add exynos-ppmu devfreq-event driver Chanwoo Choi
2015-01-12 12:34 ` [PATCHv8 4/9] devfreq: event: Add documentation for " Chanwoo Choi
2015-01-12 12:34 ` [PATCHv8 5/9] ARM: dts: Add PPMU dt node for Exynos3250 SoC Chanwoo Choi
2015-01-12 12:34 ` [PATCHv8 6/9] ARM: dts: Add PPMU dt node for Exynos4 SoCs Chanwoo Choi
2015-01-12 12:34 ` [PATCHv8 7/9] ARM: dts: Add PPMU dt node for Exynos5260 SoC Chanwoo Choi
2015-01-19 10:01   ` Chanwoo Choi [this message]
2015-01-12 12:34 ` [PATCHv8 8/9] ARM: dts: exynos: Add PPMU node to Exynos3250-based Rinato/Monk board Chanwoo Choi
2015-01-12 12:34 ` [PATCHv8 9/9] ARM: dts: exynos: Add PPMU node for Exynos4412-based TRATS2 board Chanwoo Choi
2015-01-19  0:50 ` [PATCHv8 0/9] devfreq: Add devfreq-event class to provide raw data for devfreq device Chanwoo Choi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54BCD604.3030105@samsung.com \
    --to=cw00.choi@samsung.com \
    --cc=a.kesavan@samsung.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=inki.dae@samsung.com \
    --cc=jhbird.choi@samsung.com \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene@kernel.org \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=rafael.j.wysocki@intel.com \
    --cc=robh+dt@kernel.org \
    --cc=tomasz.figa@gmail.com \
    --subject='Re: [PATCHv8 7/9] ARM: dts: Add PPMU dt node for Exynos5260 SoC' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).