LKML Archive on lore.kernel.org
 help / color / Atom feed
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
To: "Ahmed S. Darwish" <darwish.07@gmail.com>,
	Olivier Sobrie <olivier@sobrie.be>,
	Oliver Hartkopp <socketcan@hartkopp.net>,
	Wolfgang Grandegger <wg@grandegger.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Andri Yngvason <andri.yngvason@marel.com>,
	Linux-CAN <linux-can@vger.kernel.org>,
	netdev <netdev@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT
Date: Wed, 21 Jan 2015 15:24:46 +0300
Message-ID: <54BF9A8E.7000202@cogentembedded.com> (raw)
In-Reply-To: <20150120214834.GD16828@linux>

Hello.

On 1/21/2015 12:48 AM, Ahmed S. Darwish wrote:

> From: Ahmed S. Darwish <ahmed.darwish@valeo.com>

> On some x86 laptops, plugging a Kvaser device again after an
> unplug makes the firmware always ignore the very first command.
> For such a case, provide some room for retries instead of
> completly exiting the driver init code.

    Completely.

> Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
> ---
>   drivers/net/can/usb/kvaser_usb.c | 12 ++++++++++--
>   1 file changed, 10 insertions(+), 2 deletions(-)

> diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
> index 640b0eb..068e76c 100644
> --- a/drivers/net/can/usb/kvaser_usb.c
> +++ b/drivers/net/can/usb/kvaser_usb.c
[...]
> @@ -1632,7 +1632,15 @@ static int kvaser_usb_probe(struct usb_interface *intf,
>
>   	usb_set_intfdata(intf, dev);
>
> -	err = kvaser_usb_get_software_info(dev);
> +	/* On some x86 laptops, plugging a Kvaser device again after
> +	 * an unplug makes the firmware always ignore the very first
> +	 * command. For such a case, provide some room for retries
> +	 * instead of completly exiting the driver.

    Completely.

[...]

WBR, Sergei


  parent reply index

Thread overview: 95+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-23 15:46 [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Ahmed S. Darwish
2014-12-23 15:53 ` [PATCH] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-24 12:36   ` Olivier Sobrie
2014-12-24 15:04     ` Ahmed S. Darwish
2014-12-28 21:51       ` Olivier Sobrie
2014-12-30 15:33         ` Ahmed S. Darwish
2014-12-31 12:13           ` Olivier Sobrie
2014-12-24 12:31 ` [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Olivier Sobrie
2014-12-24 15:52   ` Ahmed S. Darwish
2014-12-24 23:56 ` [PATCH v2 1/4] " Ahmed S. Darwish
2014-12-24 23:59   ` [PATCH v2 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2014-12-25  0:02     ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2014-12-25  0:04       ` [PATCH v2 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-28 21:54       ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Olivier Sobrie
2014-12-25  2:50   ` [PATCH v2 1/4] can: kvaser_usb: Don't free packets when tight on URBs Greg KH
2014-12-25  9:38     ` Ahmed S. Darwish
2014-12-28 21:52   ` Olivier Sobrie
2015-01-01 21:59 ` [PATCH] " Stephen Hemminger
2015-01-03 14:34   ` Ahmed S. Darwish
2015-01-05 17:49 ` [PATCH v3 1/4] " Ahmed S. Darwish
2015-01-05 17:52   ` [PATCH v3 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2015-01-05 17:57     ` [PATCH v3 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2015-01-05 18:31       ` [PATCH v3 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-08 11:53         ` Marc Kleine-Budde
2015-01-08 15:19           ` Ahmed S. Darwish
2015-01-12 11:51             ` Marc Kleine-Budde
2015-01-12 12:26               ` Ahmed S. Darwish
2015-01-12 12:34                 ` Marc Kleine-Budde
2015-01-09  3:06           ` Ahmed S. Darwish
2015-01-09 14:05             ` Marc Kleine-Budde
2015-01-08  9:59   ` [PATCH v3 1/4] can: kvaser_usb: Don't free packets when tight on URBs Marc Kleine-Budde
2015-01-11 20:05 ` [PATCH v4 00/04] can: Introduce support for Kvaser USBCAN-II devices Ahmed S. Darwish
2015-01-11 20:11   ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() devices Ahmed S. Darwish
2015-01-11 20:15     ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Ahmed S. Darwish
2015-01-11 20:36       ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-11 20:45         ` [PATCH v4 4/4] can: kvaser_usb: Retry first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-11 20:51           ` Marc Kleine-Budde
2015-01-12 10:14             ` Ahmed S. Darwish
2015-01-12 10:25               ` Marc Kleine-Budde
2015-01-12 13:33               ` Olivier Sobrie
2015-01-12 13:50                 ` Ahmed S. Darwish
2015-01-12 11:20         ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-12 11:43         ` Marc Kleine-Budde
2015-01-12 12:07           ` Ahmed S. Darwish
2015-01-12 12:36             ` Ahmed S. Darwish
2015-01-12 13:53         ` Olivier Sobrie
2015-01-18 20:12           ` Ahmed S. Darwish
2015-01-18 20:13             ` Marc Kleine-Budde
2015-01-12 11:09       ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Marc Kleine-Budde
2015-01-12 20:36         ` Ahmed S. Darwish
2015-01-16 14:39           ` Marc Kleine-Budde
2015-01-11 20:49     ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() Ahmed S. Darwish
2015-01-12 11:05       ` Marc Kleine-Budde
2015-01-20 21:44 ` [PATCH v5 1/5] can: kvaser_usb: Update net interface state before exiting on OOM Ahmed S. Darwish
2015-01-20 21:45   ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-20 21:47     ` [PATCH v5 3/5] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-20 21:48       ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-20 21:50         ` [PATCH v5 5/5] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-21 12:24         ` Sergei Shtylyov [this message]
2015-01-25 11:59           ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-21 10:33     ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-21 10:44       ` Marc Kleine-Budde
2015-01-21 11:00         ` Andri Yngvason
2015-01-21 11:53       ` Wolfgang Grandegger
2015-01-21 14:43         ` Ahmed S. Darwish
2015-01-21 15:00           ` Andri Yngvason
2015-01-21 15:36             ` Ahmed S. Darwish
2015-01-21 16:13               ` Wolfgang Grandegger
2015-01-23  6:07                 ` Ahmed S. Darwish
2015-01-23 10:32                   ` Andri Yngvason
2015-01-25  2:43                     ` Ahmed S. Darwish
2015-01-26 10:21                       ` Andri Yngvason
2015-01-21 16:37               ` Andri Yngvason
2015-01-21 16:20     ` Andri Yngvason
2015-01-21 22:59       ` Marc Kleine-Budde
2015-01-22 10:14         ` Andri Yngvason
2015-01-25  2:49           ` Ahmed S. Darwish
2015-01-25  3:21       ` Ahmed S. Darwish
2015-01-26  5:17 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Ahmed S. Darwish
2015-01-26  5:20   ` [PATCH v6 1/7] can: kvaser_usb: Do not sleep in atomic context Ahmed S. Darwish
2015-01-26  5:22     ` [PATCH v6 2/7] can: kvaser_usb: Send correct context to URB completion Ahmed S. Darwish
2015-01-26  5:24       ` [PATCH v6 3/7] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-26  5:25         ` [PATCH v6 4/7] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-26  5:27           ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Ahmed S. Darwish
2015-01-26  5:29             ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-26  5:33               ` [PATCH v6 7/7] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-26 10:34                 ` Andri Yngvason
2015-01-26 10:26               ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-26 10:28             ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Andri Yngvason
2015-01-26 10:50               ` Marc Kleine-Budde
2015-01-26 10:52                 ` Andri Yngvason
2015-01-26 10:53                   ` Marc Kleine-Budde
2015-01-26  9:55   ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Marc Kleine-Budde
2015-01-26 10:07   ` Marc Kleine-Budde
2015-01-26 10:56     ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54BF9A8E.7000202@cogentembedded.com \
    --to=sergei.shtylyov@cogentembedded.com \
    --cc=andri.yngvason@marel.com \
    --cc=darwish.07@gmail.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=olivier@sobrie.be \
    --cc=socketcan@hartkopp.net \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lkml.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lkml.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lkml.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lkml.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lkml.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lkml.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lkml.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lkml.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lkml.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lkml.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lkml.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lkml.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git