LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Karol Wrona <k.wrona@samsung.com>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald <pmeerw@pmeerw.net>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	Karol Wrona <wrona.vy@gmail.com>
Subject: Re: [PATCH v5 5/5] iio: common: ssp_sensors: Add sensorhub gyroscope sensor
Date: Thu, 29 Jan 2015 18:37:25 +0000	[thread overview]
Message-ID: <54CA7DE5.3050302@kernel.org> (raw)
In-Reply-To: <1422453954-27317-6-git-send-email-k.wrona@samsung.com>

On 28/01/15 14:05, Karol Wrona wrote:
> This patch adds gyroscope iio driver which uses sensorhub as data
> provider.
> 
> Signed-off-by: Karol Wrona <k.wrona@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Applied.

A nice driver - glad to have it in the tree!

Jonathan
> ---
>  drivers/iio/gyro/Makefile          |    2 +
>  drivers/iio/gyro/ssp_gyro_sensor.c |  168 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 170 insertions(+)
>  create mode 100644 drivers/iio/gyro/ssp_gyro_sensor.c
> 
> diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
> index 36a3877..f46341b 100644
> --- a/drivers/iio/gyro/Makefile
> +++ b/drivers/iio/gyro/Makefile
> @@ -16,6 +16,8 @@ itg3200-y               := itg3200_core.o
>  itg3200-$(CONFIG_IIO_BUFFER) += itg3200_buffer.o
>  obj-$(CONFIG_ITG3200)   += itg3200.o
>  
> +obj-$(CONFIG_IIO_SSP_SENSORS_COMMONS) += ssp_gyro_sensor.o
> +
>  obj-$(CONFIG_IIO_ST_GYRO_3AXIS) += st_gyro.o
>  st_gyro-y := st_gyro_core.o
>  st_gyro-$(CONFIG_IIO_BUFFER) += st_gyro_buffer.o
> diff --git a/drivers/iio/gyro/ssp_gyro_sensor.c b/drivers/iio/gyro/ssp_gyro_sensor.c
> new file mode 100644
> index 0000000..0a8afdd
> --- /dev/null
> +++ b/drivers/iio/gyro/ssp_gyro_sensor.c
> @@ -0,0 +1,168 @@
> +/*
> + *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
> + *
> + *  This program is free software; you can redistribute it and/or modify
> + *  it under the terms of the GNU General Public License as published by
> + *  the Free Software Foundation; either version 2 of the License, or
> + *  (at your option) any later version.
> + *
> + *  This program is distributed in the hope that it will be useful,
> + *  but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *  GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/iio/common/ssp_sensors.h>
> +#include <linux/iio/iio.h>
> +#include <linux/iio/kfifo_buf.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +#include "../common/ssp_sensors/ssp_iio_sensor.h"
> +
> +#define SSP_CHANNEL_COUNT 3
> +
> +#define SSP_GYROSCOPE_NAME "ssp-gyroscope"
> +static const char ssp_gyro_name[] = SSP_GYROSCOPE_NAME;
> +
> +enum ssp_gyro_3d_channel {
> +	SSP_CHANNEL_SCAN_INDEX_X,
> +	SSP_CHANNEL_SCAN_INDEX_Y,
> +	SSP_CHANNEL_SCAN_INDEX_Z,
> +	SSP_CHANNEL_SCAN_INDEX_TIME,
> +};
> +
> +static int ssp_gyro_read_raw(struct iio_dev *indio_dev,
> +			     struct iio_chan_spec const *chan, int *val,
> +			     int *val2, long mask)
> +{
> +	u32 t;
> +	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		t = ssp_get_sensor_delay(data, SSP_GYROSCOPE_SENSOR);
> +		ssp_convert_to_freq(t, val, val2);
> +		return IIO_VAL_INT_PLUS_MICRO;
> +	default:
> +		break;
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static int ssp_gyro_write_raw(struct iio_dev *indio_dev,
> +			      struct iio_chan_spec const *chan, int val,
> +			      int val2, long mask)
> +{
> +	int ret;
> +	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
> +
> +	switch (mask) {
> +	case IIO_CHAN_INFO_SAMP_FREQ:
> +		ret = ssp_convert_to_time(val, val2);
> +		ret = ssp_change_delay(data, SSP_GYROSCOPE_SENSOR, ret);
> +		if (ret < 0)
> +			dev_err(&indio_dev->dev, "gyro sensor enable fail\n");
> +
> +		return ret;
> +	default:
> +		break;
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static struct iio_info ssp_gyro_iio_info = {
> +	.read_raw = &ssp_gyro_read_raw,
> +	.write_raw = &ssp_gyro_write_raw,
> +};
> +
> +static const unsigned long ssp_gyro_scan_mask[] = { 0x07, 0, };
> +
> +static const struct iio_chan_spec ssp_gyro_channels[] = {
> +	SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_X, SSP_CHANNEL_SCAN_INDEX_X),
> +	SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_Y, SSP_CHANNEL_SCAN_INDEX_Y),
> +	SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_Z, SSP_CHANNEL_SCAN_INDEX_Z),
> +	SSP_CHAN_TIMESTAMP(SSP_CHANNEL_SCAN_INDEX_TIME),
> +};
> +
> +static int ssp_process_gyro_data(struct iio_dev *indio_dev, void *buf,
> +				 int64_t timestamp)
> +{
> +	return ssp_common_process_data(indio_dev, buf, SSP_GYROSCOPE_SIZE,
> +				       timestamp);
> +}
> +
> +static const struct iio_buffer_setup_ops ssp_gyro_buffer_ops = {
> +	.postenable = &ssp_common_buffer_postenable,
> +	.postdisable = &ssp_common_buffer_postdisable,
> +};
> +
> +static int ssp_gyro_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	struct iio_dev *indio_dev;
> +	struct ssp_sensor_data *spd;
> +	struct iio_buffer *buffer;
> +
> +	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*spd));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	spd = iio_priv(indio_dev);
> +
> +	spd->process_data = ssp_process_gyro_data;
> +	spd->type = SSP_GYROSCOPE_SENSOR;
> +
> +	indio_dev->name = ssp_gyro_name;
> +	indio_dev->dev.parent = &pdev->dev;
> +	indio_dev->info = &ssp_gyro_iio_info;
> +	indio_dev->modes = INDIO_BUFFER_SOFTWARE;
> +	indio_dev->channels = ssp_gyro_channels;
> +	indio_dev->num_channels = ARRAY_SIZE(ssp_gyro_channels);
> +	indio_dev->available_scan_masks = ssp_gyro_scan_mask;
> +
> +	buffer = devm_iio_kfifo_allocate(&pdev->dev);
> +	if (!buffer)
> +		return -ENOMEM;
> +
> +	iio_device_attach_buffer(indio_dev, buffer);
> +
> +	indio_dev->setup_ops = &ssp_gyro_buffer_ops;
> +
> +	platform_set_drvdata(pdev, indio_dev);
> +
> +	ret = iio_device_register(indio_dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	/* ssp registering should be done after all iio setup */
> +	ssp_register_consumer(indio_dev, SSP_GYROSCOPE_SENSOR);
> +
> +	return 0;
> +}
> +
> +static int ssp_gyro_remove(struct platform_device *pdev)
> +{
> +	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
> +
> +	iio_device_unregister(indio_dev);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver ssp_gyro_driver = {
> +	.driver = {
> +		.name = SSP_GYROSCOPE_NAME,
> +	},
> +	.probe = ssp_gyro_probe,
> +	.remove = ssp_gyro_remove,
> +};
> +
> +module_platform_driver(ssp_gyro_driver);
> +
> +MODULE_AUTHOR("Karol Wrona <k.wrona@samsung.com>");
> +MODULE_DESCRIPTION("Samsung sensorhub gyroscopes driver");
> +MODULE_LICENSE("GPL");
> 


      reply	other threads:[~2015-01-29 18:37 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-28 14:05 [PATCH v5 0/5] iio: Add sensorhub driver Karol Wrona
2015-01-28 14:05 ` [PATCH v5 1/5] iio: common: ssp_sensors: " Karol Wrona
2015-01-29 18:35   ` Jonathan Cameron
2015-01-29 18:46     ` Karol Wrona
2015-01-29 18:53       ` Jonathan Cameron
2015-01-28 14:05 ` [PATCH v5 2/5] iio: sensorhub: Add sensorhub bindings Karol Wrona
2015-01-29 18:36   ` Jonathan Cameron
2015-01-28 14:05 ` [PATCH v5 3/5] iio: common: ssp_sensors: Add sensorhub iio commons Karol Wrona
2015-01-29 18:36   ` Jonathan Cameron
2015-01-28 14:05 ` [PATCH v5 4/5] iio: common: ssp_sensors: Add sensorhub accelerometer sensor Karol Wrona
2015-01-29 18:37   ` Jonathan Cameron
2015-01-28 14:05 ` [PATCH v5 5/5] iio: common: ssp_sensors: Add sensorhub gyroscope sensor Karol Wrona
2015-01-29 18:37   ` Jonathan Cameron [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54CA7DE5.3050302@kernel.org \
    --to=jic23@kernel.org \
    --cc=b.zolnierkie@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=k.wrona@samsung.com \
    --cc=knaack.h@gmx.de \
    --cc=kyungmin.park@samsung.com \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=wrona.vy@gmail.com \
    --subject='Re: [PATCH v5 5/5] iio: common: ssp_sensors: Add sensorhub gyroscope sensor' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).