LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Neelesh Gupta <neelegup@linux.vnet.ibm.com>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Wolfram Sang <wsa@the-dreams.de>,
	linux-i2c@vger.kernel.org, linux-mips@linux-mips.org,
	linux-kernel@vger.kernel.org,
	Ludovic Desroches <ludovic.desroches@atmel.com>,
	Yingjoe Chen <yingjoe.chen@mediatek.com>,
	Eddie Huang <eddie.huang@mediatek.com>,
	linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [RFC V2 04/12] i2c: opal: make use of the new infrastructure for quirks
Date: Wed, 11 Mar 2015 09:56:20 +0530	[thread overview]
Message-ID: <54FFC3EC.7020708@linux.vnet.ibm.com> (raw)
In-Reply-To: <1426029133.17565.9.camel@kernel.crashing.org>


On 03/11/2015 04:42 AM, Benjamin Herrenschmidt wrote:
> On Tue, 2015-03-10 at 22:43 +0530, Neelesh Gupta wrote:
>> I tested the i2c opal driver after updating the patch as below.
>> Basically I think we can also support write-then-{read/write}
>> for the number of messages = 2.
>> Ben, any issues if we support both write plus read/write in the
>> opal driver ?
> Nope, in fact it's a good idea, I found myself having to expoes such
> an interface to some userspace tool of ours.
>
> However...
>
>> diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
>> index 16f90b1..85412ba 100644
>> --- a/drivers/i2c/busses/i2c-opal.c
>> +++ b/drivers/i2c/busses/i2c-opal.c
>> @@ -104,18 +104,8 @@ static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
>>    		req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf));
>>    		break;
>>    	case 2:
>> -		/* For two messages, we basically support only simple
>> -		 * smbus transactions of a write plus a read. We might
>> -		 * want to allow also two writes but we'd have to bounce
>> -		 * the data into a single buffer.
>> -		 */
>> -		if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD))
>> -			return -EOPNOTSUPP;
> Don't we still want to enforce that the first message is a write ?
> Somebody may not be looking at the quirks...
>
>> -		if (msgs[0].len > 4)
>> -			return -EOPNOTSUPP;
> And that the len is supported...
>
>> -		if (msgs[0].addr != msgs[1].addr)
>> -			return -EOPNOTSUPP;
> Same...
>
> Ie, the quirk indicates to the callers what we support, but we should
> still check that we aren't called with something that doesn't match.

Quirk *also* return error to the user if any of the conditions mismatch with
what we have indicated through the quriks structure...

I think we can't land up here by-passing the check for quirks so above 
checks
are duplicated here..

Neelesh.

>
>> -		req.type = OPAL_I2C_SM_READ;
>> +		req.type = (msgs[1].flags & I2C_M_RD) ?
>> +			OPAL_I2C_SM_READ : OPAL_I2C_SM_WRITE;
>>    		req.addr = cpu_to_be16(msgs[0].addr);
>>    		req.subaddr_sz = msgs[0].len;
>>    		for (i = 0; i < msgs[0].len; i++)
>> @@ -210,6 +200,11 @@ static const struct i2c_algorithm i2c_opal_algo = {
>>    	.functionality	= i2c_opal_func,
>>    };
>>
>> +static struct i2c_adapter_quirks i2c_opal_quirks = {
>> +	.flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
>> +	.max_comb_1st_msg_len = 4,
>> +};
>> +
>>    static int i2c_opal_probe(struct platform_device *pdev)
>>    {
>>    	struct i2c_adapter	*adapter;
>> @@ -232,6 +227,7 @@ static int i2c_opal_probe(struct platform_device *pdev)
>>
>>    	adapter->algo = &i2c_opal_algo;
>>    	adapter->algo_data = (void *)(unsigned long)opal_id;
>> +	adapter->quirks = &i2c_opal_quirks;
>>    	adapter->dev.parent = &pdev->dev;
>>    	adapter->dev.of_node = of_node_get(pdev->dev.of_node);
>>    	pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL);
>>
>>
>>
>> On 02/25/2015 09:31 PM, Wolfram Sang wrote:
>>> From: Wolfram Sang <wsa+renesas@sang-engineering.com>
>>>
>>> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
>>> ---
>>>    drivers/i2c/busses/i2c-opal.c | 22 +++++++++++-----------
>>>    1 file changed, 11 insertions(+), 11 deletions(-)
>>>
>>> diff --git a/drivers/i2c/busses/i2c-opal.c b/drivers/i2c/busses/i2c-opal.c
>>> index 16f90b1a750894..b2788ecad5b3cb 100644
>>> --- a/drivers/i2c/busses/i2c-opal.c
>>> +++ b/drivers/i2c/busses/i2c-opal.c
>>> @@ -104,17 +104,6 @@ static int i2c_opal_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
>>>    		req.buffer_ra = cpu_to_be64(__pa(msgs[0].buf));
>>>    		break;
>>>    	case 2:
>>> -		/* For two messages, we basically support only simple
>>> -		 * smbus transactions of a write plus a read. We might
>>> -		 * want to allow also two writes but we'd have to bounce
>>> -		 * the data into a single buffer.
>>> -		 */
>>> -		if ((msgs[0].flags & I2C_M_RD) || !(msgs[1].flags & I2C_M_RD))
>>> -			return -EOPNOTSUPP;
>>> -		if (msgs[0].len > 4)
>>> -			return -EOPNOTSUPP;
>>> -		if (msgs[0].addr != msgs[1].addr)
>>> -			return -EOPNOTSUPP;
>>>    		req.type = OPAL_I2C_SM_READ;
>>>    		req.addr = cpu_to_be16(msgs[0].addr);
>>>    		req.subaddr_sz = msgs[0].len;
>>> @@ -210,6 +199,16 @@ static const struct i2c_algorithm i2c_opal_algo = {
>>>    	.functionality	= i2c_opal_func,
>>>    };
>>>    
>>> +/* For two messages, we basically support only simple
>>> + * smbus transactions of a write plus a read. We might
>>> + * want to allow also two writes but we'd have to bounce
>>> + * the data into a single buffer.
>>> + */
>>> +static struct i2c_adapter_quirks i2c_opal_quirks = {
>>> +	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
>>> +	.max_comb_1st_msg_len = 4,
>>> +};
>>> +
>>>    static int i2c_opal_probe(struct platform_device *pdev)
>>>    {
>>>    	struct i2c_adapter	*adapter;
>>> @@ -232,6 +231,7 @@ static int i2c_opal_probe(struct platform_device *pdev)
>>>    
>>>    	adapter->algo = &i2c_opal_algo;
>>>    	adapter->algo_data = (void *)(unsigned long)opal_id;
>>> +	adapter->quirks = &i2c_opal_quirks;
>>>    	adapter->dev.parent = &pdev->dev;
>>>    	adapter->dev.of_node = of_node_get(pdev->dev.of_node);
>>>    	pname = of_get_property(pdev->dev.of_node, "ibm,port-name", NULL);
>


  reply	other threads:[~2015-03-11  4:29 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-25 16:01 [RFC V2 00/12] i2c: describe adapter quirks in a generic way Wolfram Sang
2015-02-25 16:01 ` [RFC V2 01/12] i2c: add quirk structure to describe adapter flaws Wolfram Sang
2015-02-25 16:01 ` [RFC V2 02/12] i2c: add quirk checks to core Wolfram Sang
2015-02-25 16:01 ` [RFC V2 03/12] i2c: at91: make use of the new infrastructure for quirks Wolfram Sang
2015-03-08  8:28   ` Wolfram Sang
2015-03-09 16:11     ` Ludovic Desroches
2015-03-10 13:55     ` Ludovic Desroches
2015-03-12 14:50       ` Wolfram Sang
2015-02-25 16:01 ` [RFC V2 04/12] i2c: opal: " Wolfram Sang
2015-03-10 17:13   ` Neelesh Gupta
2015-03-10 23:12     ` Benjamin Herrenschmidt
2015-03-11  4:26       ` Neelesh Gupta [this message]
2015-03-12 14:55         ` Wolfram Sang
2015-02-25 16:01 ` [RFC V2 05/12] i2c: qup: " Wolfram Sang
2015-02-25 16:01 ` [RFC V2 06/12] i2c: cpm: " Wolfram Sang
2015-02-25 16:01 ` [RFC V2 07/12] i2c: axxia: " Wolfram Sang
2015-02-25 16:01 ` [RFC V2 08/12] i2c: dln2: " Wolfram Sang
2015-02-25 16:02 ` [RFC V2 09/12] i2c: powermac: " Wolfram Sang
2015-02-25 16:02 ` [RFC V2 10/12] i2c: viperboard: " Wolfram Sang
2015-02-25 16:02 ` [RFC V2 11/12] i2c: pmcmsp: " Wolfram Sang
2015-02-25 16:02 ` [RFC V2 12/12] i2c: bcm-iproc: " Wolfram Sang
2015-02-26 23:32   ` Ray Jui
2015-03-12 14:56     ` Wolfram Sang
2015-03-05 13:27 ` [RFC V2 00/12] i2c: describe adapter quirks in a generic way Ivan T. Ivanov
2015-03-12 14:56   ` Wolfram Sang
2015-03-14 11:14 ` Wolfram Sang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=54FFC3EC.7020708@linux.vnet.ibm.com \
    --to=neelegup@linux.vnet.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=eddie.huang@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=ludovic.desroches@atmel.com \
    --cc=wsa@the-dreams.de \
    --cc=yingjoe.chen@mediatek.com \
    --subject='Re: [RFC V2 04/12] i2c: opal: make use of the new infrastructure for quirks' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).