LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH v3 0/2] Apple M1 PCIe DT bindings
@ 2021-07-26  8:31 Mark Kettenis
  2021-07-26  8:32 ` [PATCH v3 1/2] dt-bindings: pci: Add DT bindings for apple,pcie Mark Kettenis
                   ` (2 more replies)
  0 siblings, 3 replies; 14+ messages in thread
From: Mark Kettenis @ 2021-07-26  8:31 UTC (permalink / raw)
  To: devicetree
  Cc: maz, robin.murphy, sven, Mark Kettenis, Hector Martin,
	Bjorn Helgaas, Rob Herring, linux-arm-kernel, linux-pci,
	linux-kernel

From: Mark Kettenis <kettenis@openbsd.org>

This small series adds bindings for the PCIe controller found on the
Apple M1 SoC.

At this point, the primary consumer for these bindings is U-Boot.
With these bindings U-Boot can bring up the links for the root ports
of the PCIe root complex.  A simple OS driver can then provide
standard ECAM access and manage MSI interrupts to provide access
to the built-in Ethernet and XHCI controllers of the Mac mini.

The Apple controller incorporates Synopsys Designware PCIe logic
to implement its root port.  But unlike other hardware currently
supported by U-Boot and the Linux kernel the Apple hardware
integrates multiple root ports.  As such the existing bindings
for the DWC PCIe interface can't be used.  There is a single ECAM
space for all root space, but separate GPIOs to take the PCI devices
on those ports out of reset.  Therefore the standard "reset-gpio" and
"max-link-speed" properties appear on the child nodes representing
the PCI devices that correspond to the individual root ports.

MSIs are handled by the PCIe controller and translated into "regular
interrupts".  A range of 32 MSIs is provided.  These 32 MSIs can be
distributed over the root ports as the OS sees fit by programming the
PCIe controller port registers.

I still hope to hear from Marc Zyngier on the way MSIs are represented
in this binding.

Patch 2/2 of this series depends on the pinctrl series I sent earlier
and will probably go through Hector Martin's Apple M1 SoC tree.


Changelog:

v3: - Remove unneeded include in example

v2: - Adjust name for ECAM in "reg-names"
    - Drop "phy" registers
    - Expand description
    - Add description for "interrupts"
    - Fix incorrect minItems for "interrupts"
    - Fix incorrect MaxItems for "reg-names"
    - Document the use of "msi-controller", "msi-parent", "iommu-map" and
      "iommu-map-mask"
    - Fix "bus-range" and "iommu-map" properties in the example

Mark Kettenis (2):
  dt-bindings: pci: Add DT bindings for apple,pcie
  arm64: apple: Add PCIe node

 .../devicetree/bindings/pci/apple,pcie.yaml   | 166 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 arch/arm64/boot/dts/apple/t8103.dtsi          |  63 +++++++
 3 files changed, 230 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/apple,pcie.yaml

-- 
2.32.0


^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2021-08-23 15:24 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-26  8:31 [PATCH v3 0/2] Apple M1 PCIe DT bindings Mark Kettenis
2021-07-26  8:32 ` [PATCH v3 1/2] dt-bindings: pci: Add DT bindings for apple,pcie Mark Kettenis
2021-07-26 23:18   ` Rob Herring
2021-07-31  9:44     ` Mark Kettenis
2021-08-01  9:31     ` Marc Zyngier
2021-08-02 16:10       ` Rob Herring
2021-08-15 16:36         ` Marc Zyngier
2021-08-15 19:19           ` Rob Herring
2021-08-18 19:56             ` Mark Kettenis
2021-08-18 20:51               ` Rob Herring
2021-08-22 17:44                 ` Mark Kettenis
2021-08-23 15:24                   ` Rob Herring
2021-07-26  8:32 ` [PATCH v3 2/2] arm64: apple: Add PCIe node Mark Kettenis
2021-07-26 10:05 ` [PATCH v3 0/2] Apple M1 PCIe DT bindings Marc Zyngier

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox