LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Mark Kettenis <mark.kettenis@xs4all.nl>
To: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org, alyssa@rosenzweig.io,
	kettenis@openbsd.org, tglx@linutronix.de, maz@kernel.org,
	marcan@marcan.st, bhelgaas@google.com, jim2101024@gmail.com,
	nsaenz@kernel.org, f.fainelli@gmail.com,
	bcm-kernel-feedback-list@broadcom.com,
	daire.mcnamara@microchip.com, nsaenzjulienne@suse.de,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, linux-pci@vger.kernel.org,
	linux-rpi-kernel@lists.infradead.org
Subject: Re: [PATCH v4 3/4] dt-bindings: pci: Add DT bindings for apple,pcie
Date: Wed, 1 Sep 2021 13:29:22 +0200 (CEST)	[thread overview]
Message-ID: <561431b178447575@bloch.sibelius.xs4all.nl> (raw)
In-Reply-To: <YS6dWI4wwg7XkuNA@robh.at.kernel.org> (message from Rob Herring on Tue, 31 Aug 2021 16:21:28 -0500)

> Date: Tue, 31 Aug 2021 16:21:28 -0500
> From: Rob Herring <robh@kernel.org>
> 
> On Fri, Aug 27, 2021 at 07:15:28PM +0200, Mark Kettenis wrote:
> > From: Mark Kettenis <kettenis@openbsd.org>
> > 
> > The Apple PCIe host controller is a PCIe host controller with
> > multiple root ports present in Apple ARM SoC platforms, including
> > various iPhone and iPad devices and the "Apple Silicon" Macs.
> > 
> > Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
> > ---
> >  .../devicetree/bindings/pci/apple,pcie.yaml   | 165 ++++++++++++++++++
> >  MAINTAINERS                                   |   1 +
> >  2 files changed, 166 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/apple,pcie.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/apple,pcie.yaml b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
> > new file mode 100644
> > index 000000000000..97a126db935a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/apple,pcie.yaml
> > @@ -0,0 +1,165 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/apple,pcie.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Apple PCIe host controller
> > +
> > +maintainers:
> > +  - Mark Kettenis <kettenis@openbsd.org>
> > +
> > +description: |
> > +  The Apple PCIe host controller is a PCIe host controller with
> > +  multiple root ports present in Apple ARM SoC platforms, including
> > +  various iPhone and iPad devices and the "Apple Silicon" Macs.
> > +  The controller incorporates Synopsys DesigWare PCIe logic to
> > +  implements its root ports.  But the ATU found on most DesignWare
> > +  PCIe host bridges is absent.
> > +
> > +  All root ports share a single ECAM space, but separate GPIOs are
> > +  used to take the PCI devices on those ports out of reset.  Therefore
> > +  the standard "reset-gpios" and "max-link-speed" properties appear on
> > +  the child nodes that represent the PCI bridges that correspond to
> > +  the individual root ports.
> > +
> > +  MSIs are handled by the PCIe controller and translated into regular
> > +  interrupts.  A range of 32 MSIs is provided.  These 32 MSIs can be
> > +  distributed over the root ports as the OS sees fit by programming
> > +  the PCIe controller's port registers.
> > +
> > +allOf:
> > +  - $ref: /schemas/pci/pci-bus.yaml#
> > +  - $ref: ../interrupt-controller/msi-controller.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    items:
> > +      - const: apple,t8103-pcie
> > +      - const: apple,pcie
> > +
> > +  reg:
> > +    minItems: 3
> > +    maxItems: 5
> > +
> > +  reg-names:
> > +    minItems: 3
> > +    maxItems: 5
> > +    items:
> > +      - const: config
> > +      - const: rc
> > +      - const: port0
> > +      - const: port1
> > +      - const: port2
> > +
> > +  ranges:
> > +    minItems: 2
> > +    maxItems: 2
> > +
> > +  interrupts:
> > +    description:
> > +      Interrupt specifiers, one for each root port.
> > +    minItems: 1
> > +    maxItems: 3
> > +
> > +  msi-parent: true
> 
> I still think this should be dropped as it is meaningless with 
> 'msi-controller' present.

Hmm.  As far as I can tell all current arm64 device trees that
describe hardware with an MSI controller integrated on the PCI host
bridge have both the 'msi-controller' and 'msi-parent' properties.
See arch/arm64/boot/dts/marvell/aramada-37xx.dtsi and
arch/arm64/boot/dts/xilinx/zynqmp.dtsi.

The current OpenBSD code will fail to map the MSIs if 'msi-parent'
isn't there, although Linux seems to fall back on an MSI domain that's
directly attached to the host bridge if the 'msi-parent' property is
missing.  I think it makes sense to be explicit here, but if both you
and Marc think it shouldn't be there, I probably can change the
OpenBSD to do a similar fallback.

> > +
> > +#  msi-ranges:
> > +#    description:
> > +#      A list of pairs <intid span>, where "intid" is the first
> > +#      interrupt number that can be used as an MSI, and "span" the size
> > +#      of that range.
> > +#    $ref: /schemas/types.yaml#/definitions/phandle-array
> 
> Here, you'll want just 'maxItems: 1' as there's only 1 entry.

Right.  As far as I can tell the Apple hardware only supports a single
range.

> > +
> > +  iommu-map: true
> > +  iommu-map-mask: true
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - reg-names
> > +  - bus-range
> > +  - interrupts
> > +  - msi-controller
> > +  - msi-parent
> > +  - msi-ranges
> > +
> > +unevaluatedProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/apple-aic.h>
> > +
> > +    soc {
> > +      #address-cells = <2>;
> > +      #size-cells = <2>;
> > +
> > +      pcie0: pcie@690000000 {
> > +        compatible = "apple,t8103-pcie", "apple,pcie";
> > +        device_type = "pci";
> > +
> > +        reg = <0x6 0x90000000 0x0 0x1000000>,
> > +              <0x6 0x80000000 0x0 0x4000>,
> > +              <0x6 0x81000000 0x0 0x8000>,
> > +              <0x6 0x82000000 0x0 0x8000>,
> > +              <0x6 0x83000000 0x0 0x8000>;
> > +        reg-names = "config", "rc", "port0", "port1", "port2";
> > +
> > +        interrupt-parent = <&aic>;
> > +        interrupts = <AIC_IRQ 695 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 698 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <AIC_IRQ 701 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +        msi-controller;
> > +        msi-parent = <&pcie0>;
> > +        msi-ranges = <&aic AIC_IRQ 704 IRQ_TYPE_EDGE_RISING 32>;
> > +
> > +        iommu-map = <0x100 &dart0 1 1>,
> > +                    <0x200 &dart1 1 1>,
> > +                    <0x300 &dart2 1 1>;
> > +        iommu-map-mask = <0xff00>;
> > +
> > +        bus-range = <0 3>;
> > +        #address-cells = <3>;
> > +        #size-cells = <2>;
> > +        ranges = <0x43000000 0x6 0xa0000000 0x6 0xa0000000 0x0 0x20000000>,
> > +                 <0x02000000 0x0 0xc0000000 0x6 0xc0000000 0x0 0x40000000>;
> > +
> > +        clocks = <&pcie_core_clk>, <&pcie_aux_clk>, <&pcie_ref_clk>;
> > +        pinctrl-0 = <&pcie_pins>;
> > +        pinctrl-names = "default";
> > +
> > +        pci@0,0 {
> > +          device_type = "pci";
> > +          reg = <0x0 0x0 0x0 0x0 0x0>;
> > +          reset-gpios = <&pinctrl_ap 152 0>;
> > +          max-link-speed = <2>;
> > +
> > +          #address-cells = <3>;
> > +          #size-cells = <2>;
> > +          ranges;
> > +        };
> > +
> > +        pci@1,0 {
> > +          device_type = "pci";
> > +          reg = <0x800 0x0 0x0 0x0 0x0>;
> > +          reset-gpios = <&pinctrl_ap 153 0>;
> > +          max-link-speed = <2>;
> > +
> > +          #address-cells = <3>;
> > +          #size-cells = <2>;
> > +          ranges;
> > +        };
> > +
> > +        pci@2,0 {
> > +          device_type = "pci";
> > +          reg = <0x1000 0x0 0x0 0x0 0x0>;
> > +          reset-gpios = <&pinctrl_ap 33 0>;
> > +          max-link-speed = <1>;
> > +
> > +          #address-cells = <3>;
> > +          #size-cells = <2>;
> > +          ranges;
> > +        };
> > +      };
> > +    };
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index c6b8a720c0bc..30bea4042e7e 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -1694,6 +1694,7 @@ C:	irc://chat.freenode.net/asahi-dev
> >  T:	git https://github.com/AsahiLinux/linux.git
> >  F:	Documentation/devicetree/bindings/arm/apple.yaml
> >  F:	Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml
> > +F:	Documentation/devicetree/bindings/pci/apple,pcie.yaml
> >  F:	Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
> >  F:	arch/arm64/boot/dts/apple/
> >  F:	drivers/irqchip/irq-apple-aic.c
> > -- 
> > 2.32.0
> > 
> > 
> 

  reply	other threads:[~2021-09-01 11:29 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-27 17:15 [PATCH v4 0/4] Apple M1 PCIe DT bindings Mark Kettenis
2021-08-27 17:15 ` [PATCH v4 1/4] dt-bindings: interrupt-controller: Convert MSI controller to json-schema Mark Kettenis
2021-08-27 19:15   ` Mark Kettenis
2021-08-31 21:04     ` Rob Herring
2021-08-31 20:57   ` Rob Herring
2021-09-01 10:56     ` Mark Kettenis
2021-08-31 20:58   ` Rob Herring
2021-08-27 17:15 ` [PATCH v4 2/4] dt-bindings: interrupt-controller: msi: Add msi-ranges property Mark Kettenis
2021-08-31 21:16   ` Rob Herring
2021-09-21 17:52     ` Mark Kettenis
2021-08-27 17:15 ` [PATCH v4 3/4] dt-bindings: pci: Add DT bindings for apple,pcie Mark Kettenis
2021-08-27 17:58   ` Alyssa Rosenzweig
2021-08-27 18:22     ` Mark Kettenis
2021-08-31 21:21   ` Rob Herring
2021-09-01 11:29     ` Mark Kettenis [this message]
2021-09-12 20:13       ` Marc Zyngier
2021-09-13 20:55         ` Rob Herring
2021-08-27 17:15 ` [PATCH v4 4/4] arm64: apple: Add PCIe node Mark Kettenis
2021-08-27 17:59   ` Alyssa Rosenzweig
2021-08-27 18:24     ` Mark Kettenis
2021-08-27 20:09       ` Alyssa Rosenzweig
2021-08-30 11:37   ` Marc Zyngier
2021-08-30 14:57     ` Mark Kettenis
2021-08-30 20:40       ` Marc Zyngier
2021-08-30 15:57     ` Rob Herring
2021-08-30 20:20       ` Marc Zyngier
2021-09-12 21:30   ` Marc Zyngier
2021-09-13 18:35     ` Mark Kettenis
2021-09-21 11:01 ` [PATCH v4 0/4] Apple M1 PCIe DT bindings Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=561431b178447575@bloch.sibelius.xs4all.nl \
    --to=mark.kettenis@xs4all.nl \
    --cc=alyssa@rosenzweig.io \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=bhelgaas@google.com \
    --cc=daire.mcnamara@microchip.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=jim2101024@gmail.com \
    --cc=kettenis@openbsd.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=marcan@marcan.st \
    --cc=maz@kernel.org \
    --cc=nsaenz@kernel.org \
    --cc=nsaenzjulienne@suse.de \
    --cc=robh@kernel.org \
    --cc=tglx@linutronix.de \
    --subject='Re: [PATCH v4 3/4] dt-bindings: pci: Add DT bindings for apple,pcie' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).