LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [>=2.6.23][BUG] Oops on power disconnection
[not found] <5681ec900803300645l5369cda4g119957a4b7f05d17@mail.gmail.com>
@ 2008-03-30 13:51 ` Sanjeev Aditya Naga
2008-03-31 4:00 ` Sanjeev Aditya Naga
2008-04-02 7:14 ` Andrew Morton
0 siblings, 2 replies; 13+ messages in thread
From: Sanjeev Aditya Naga @ 2008-03-30 13:51 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1: Type: text/plain, Size: 3089 bytes --]
Hi,
This happens everytime there is a power disconnection
(switching to battery). Complete dmesg attached. This
in particular is of kernel 2.6.24.3.
Greetings,
Kind Regards,
Sanjeev
BUG: unable to handle kernel NULL pointer dereference at virtual
address 00000020
printing eip: c04c4716 *pde = 578c2067
Oops: 0000 [#1] SMP
Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U)
aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U)
bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U)
xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U)
cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U)
dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U)
snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U)
snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U)
snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U)
video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U)
i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U)
pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U)
scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U)
ehci_hcd(U)
Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)
EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0
EIP is at sysfs_addrm_start+0x21/0x81
EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000
ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)
Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000
00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d
f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8
Call Trace:
[<c04c4b45>] create_dir+0x33/0x6c
[<c04c4bab>] sysfs_create_dir+0x2d/0x40
[<c04fe65d>] kobject_get+0xf/0x13
[<c04fe8a8>] kobject_add+0xdd/0x176
[<c04fe9eb>] kobject_register+0x19/0x2d
[<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c05b03fd>] cpuidle_enable_device+0x31/0x9b
[<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
[<c0543ae2>] acpi_processor_notify+0x8b/0xf4
[<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
[<c0526630>] acpi_os_execute_notify+0x22/0x2b
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c043c212>] run_workqueue+0x7d/0x107
[<c043fa5b>] prepare_to_wait+0x28/0x45
[<c043c35a>] worker_thread+0xbe/0xca
[<c043f8ff>] autoremove_wake_function+0x0/0x35
[<c043c29c>] worker_thread+0x0/0xca
[<c043f679>] kthread+0x38/0x5d
[<c043f641>] kthread+0x0/0x5d
[<c0406477>] kernel_thread_helper+0x7/0x10
=======================
Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89
c6 83 ec 04 89 d3 31 c0 f3 ab b8 903f 72 c0 89 16 e8 6a cf 16 00 <8b>
53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff
EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4
---[ end trace 863306c7f7bb36f7 ]---
[-- Attachment #2: dmesg_error_on_power_removal --]
[-- Type: application/octet-stream, Size: 25384 bytes --]
Initializing cgroup subsys cpuset
Linux version 2.6.24.3 (root@draksha.cultuzz.in) (gcc version 4.3.0 20080222 (Red Hat 4.3.0-0.11) (GCC) ) #5 SMP Tue Apr 1 00:04:55 IST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000057e80000 (usable)
BIOS-e820: 0000000057e80000 - 0000000057e96000 (ACPI data)
BIOS-e820: 0000000057e96000 - 0000000057f00000 (ACPI NVS)
BIOS-e820: 0000000057f00000 - 0000000058000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
510MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7130
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 360064) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 360064
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 360064
On node 0 totalpages: 360064
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 1021 pages used for memmap
HighMem zone: 129667 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
Using APIC driver default
ACPI: RSDP 000F7070, 0014 (r0 TOSQCI)
ACPI: RSDT 57E8F4EF, 0038 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
ACPI: FACP 57E95D7C, 0074 (r1 ATI Bonefish 6040000 ATI F4240)
ACPI: DSDT 57E8FF4C, 5E30 (r1 TOSQCI L10 6040000 MSFT 2000002)
ACPI: FACS 57E96FC0, 0040
ACPI: APIC 57E95DF0, 005E (r1 PTLTD APIC 6040000 LTP 0)
ACPI: MCFG 57E95E4E, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: SLIC 57E95E8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
ACPI: SSDT 57E8F527, 0535 (r1 PmRef CpuPm 3000 INTL 20050228)
ACPI: DMI detected: Toshiba
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 60000000 (gap: 58000000:88000000)
swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000e4000
swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357251
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07bd000 soft=c079d000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1600.026 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1419592k/1440256k available (2263k kernel code, 19312k reserved, 1109k data, 292k init, 522752k highmem)
virtual kernel memory layout:
fixmap : 0xffc52000 - 0xfffff000 (3764 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0751000 - 0xc079a000 ( 292 kB)
.data : 0xc0635db8 - 0xc074b56c (1109 kB)
.text : 0xc0400000 - 0xc0635db8 (2263 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3202.37 BogoMIPS (lpj=1601186)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940 0000c189 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... successfully read 21669 bytes from /DSDT.aml.
ACPI: Table DSDT replaced by host OS
ACPI: DSDT 00000000, 54A5 (r1 TOSQCI L10 6040000 INTL 20061109)
ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"CPU0: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07be000 soft=c079e000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3199.52 BogoMIPS (lpj=1599764)
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c189 00000000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940 0000c189 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c
Total of 2 processors activated (6401.90 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1680 bytes
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
Time: 2:11:42 Date: 04/02/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd494, last bus=14
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI Error (dswload-0664): [\___] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception (psloop-0225): AE_NOT_FOUND, During name lookup/catalog [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._INI] (Node f781a6c0), AE_NOT_FOUND
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x200-0x20f has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0x530-0x537 has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd4-0xcd5 has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0xcd8-0xcdf has been reserved
system 00:08: ioport range 0x8000-0x805f could not be reserved
system 00:08: ioport range 0x8210-0x821f has been reserved
system 00:08: ioport range 0xf40-0xf47 has been reserved
system 00:08: ioport range 0x280-0x293 has been reserved
system 00:08: ioport range 0x87f-0x87f has been reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:09: iomem range 0xc0004800-0xc00057ff has been reserved
system 00:09: iomem range 0x0-0xfff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: c0000000-c00fffff
PREFETCH window: d0000000-dfffffff
PCI: Bus 10, cardbus bridge: 0000:09:01.0
IO window: 0000a400-0000a4ff
IO window: 0000a800-0000a8ff
PREFETCH window: 64000000-67ffffff
MEM window: 68000000-6bffffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: c0100000-c01fffff
PREFETCH window: disabled.
PCI: Enabling device 0000:09:01.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 20 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2639k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1207102301.744:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:05.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: SSDT 57E8FCDD, 01E8 (r1 PmRef Cpu0Ist 3000 INTL 20050228)
ACPI: SSDT 57E8FA5C, 01FC (r1 PmRef Cpu0Cst 3001 INTL 20050228)
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 57E8FEC5, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20050228)
ACPI: SSDT 57E8FC58, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (60 C)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:09:01.0 [1179:ff31]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:09:01.0, mfunc 0x00001002, devctl 0x44
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0100000 - 0xc01fffff
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 4:959:155
Freeing unused kernel memory: 292k freed
Write protecting the kernel read-only data: 880k
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0406000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0404000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0405000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
synaptics: Toshiba Satellite L35 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /class/input/input2
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
sata_sil 0000:00:12.0: version 2.3
PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xc0407000 tf 0xc0407080 irq 18
ata2: SATA max UDMA/100 mmio m512@0xc0407000 tf 0xc04070c0 irq 18
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:14.1 to 64
ACPI: PCI interrupt for device 0000:00:14.1 disabled
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
scsi2 : pata_atiixp
scsi3 : pata_atiixp
ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
ata3: port disabled. ignoring.
ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1207102314.976:2): selinux=0 auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Attached scsi generic sg1 type 5
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
input: PC Speaker as /class/input/input3
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
input: Video Bus as /class/input/input4
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xf8918000, 00:1b:24:1e:9a:57, IRQ 21
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input7
ACPI: Power Button (CM) [PWRB]
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19
ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0xb
ALSA sound/pci/hda/hda_codec.c:2137: hda_codec: model '3stack' is selected
ALSA sound/pci/hda/patch_si3054.c:238: si3054: cannot initialize. EXT MID = 0000
ALSA sound/pci/hda/patch_si3054.c:250: Link Frame Detect(FDT) is not ready (line status: 0000)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on sda4, internal journal
fuse init (API version 7.9)
Adding 3116600k swap on /dev/sda3. Priority:-1 extents:1 across:3116600k
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
openser[1699]: segfault at 00000009 eip 0045a625 esp bf9347fc error 4
Bridge firewalling registered
virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
virbr0: starting userspace STP failed, starting kernel STP
virbr0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hda-intel: Invalid position buffer, using LPIB read method instead.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
WARNING: at lib/kref.c:33 kref_get() (Not tainted)
Pid: 69, comm: kacpi_notify Not tainted 2.6.24.3 #5
[<c04ff274>] kref_get+0x3d/0x45
[<c04fe65d>] kobject_get+0xf/0x13
[<c04fe84d>] kobject_add+0x82/0x176
[<c04fe9eb>] kobject_register+0x19/0x2d
[<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c05b03fd>] cpuidle_enable_device+0x31/0x9b
[<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
[<c0543ae2>] acpi_processor_notify+0x8b/0xf4
[<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
[<c0526630>] acpi_os_execute_notify+0x22/0x2b
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c043c212>] run_workqueue+0x7d/0x107
[<c043fa5b>] prepare_to_wait+0x28/0x45
[<c043c35a>] worker_thread+0xbe/0xca
[<c043f8ff>] autoremove_wake_function+0x0/0x35
[<c043c29c>] worker_thread+0x0/0xca
[<c043f679>] kthread+0x38/0x5d
[<c043f641>] kthread+0x0/0x5d
[<c0406477>] kernel_thread_helper+0x7/0x10
=======================
BUG: unable to handle kernel NULL pointer dereference at virtual address 00000020
printing eip: c04c4716 *pde = 578c2067
Oops: 0000 [#1] SMP
Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U) aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U) bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U) xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U) cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U) dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U) snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U) snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U) snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U) video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U) i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U) pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U) scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U) ehci_hcd(U)
Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)
EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0
EIP is at sysfs_addrm_start+0x21/0x81
EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000
ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)
Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000
00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d
f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8
Call Trace:
[<c04c4b45>] create_dir+0x33/0x6c
[<c04c4bab>] sysfs_create_dir+0x2d/0x40
[<c04fe65d>] kobject_get+0xf/0x13
[<c04fe8a8>] kobject_add+0xdd/0x176
[<c04fe9eb>] kobject_register+0x19/0x2d
[<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c05b03fd>] cpuidle_enable_device+0x31/0x9b
[<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
[<c0543ae2>] acpi_processor_notify+0x8b/0xf4
[<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
[<c0526630>] acpi_os_execute_notify+0x22/0x2b
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c043c212>] run_workqueue+0x7d/0x107
[<c043fa5b>] prepare_to_wait+0x28/0x45
[<c043c35a>] worker_thread+0xbe/0xca
[<c043f8ff>] autoremove_wake_function+0x0/0x35
[<c043c29c>] worker_thread+0x0/0xca
[<c043f679>] kthread+0x38/0x5d
[<c043f641>] kthread+0x0/0x5d
[<c0406477>] kernel_thread_helper+0x7/0x10
=======================
Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89 c6 83 ec 04 89 d3 31 c0 f3 ab b8 90 3f 72 c0 89 16 e8 6a cf 16 00 <8b> 53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff
EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4
---[ end trace 863306c7f7bb36f7 ]---
atkbd.c: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 55 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x55 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 55 <keycode>' to make it known.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-03-30 13:51 ` [>=2.6.23][BUG] Oops on power disconnection Sanjeev Aditya Naga
@ 2008-03-31 4:00 ` Sanjeev Aditya Naga
2008-04-02 7:14 ` Andrew Morton
1 sibling, 0 replies; 13+ messages in thread
From: Sanjeev Aditya Naga @ 2008-03-31 4:00 UTC (permalink / raw)
To: linux-kernel
Hi,
Please find the dmesg below:
BTW, I tried basically with kernels after 2.6.21 and I get the
same result.
Kind Regards,
Sanjeev
Initializing cgroup subsys cpuset
Linux version 2.6.24.3 (root@draksha.cultuzz.in) (gcc version 4.3.0
20080222 (Red Hat 4.3.0-0.11) (GCC) ) #5 SMP Tue Apr 1 00:04:55 IST
2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000057e80000 (usable)
BIOS-e820: 0000000057e80000 - 0000000057e96000 (ACPI data)
BIOS-e820: 0000000057e96000 - 0000000057f00000 (ACPI NVS)
BIOS-e820: 0000000057f00000 - 0000000058000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
510MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f7130
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 360064) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 229376
HighMem 229376 -> 360064
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 360064
On node 0 totalpages: 360064
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1760 pages used for memmap
Normal zone: 223520 pages, LIFO batch:31
HighMem zone: 1021 pages used for memmap
HighMem zone: 129667 pages, LIFO batch:31
Movable zone: 0 pages used for memmap
DMI present.
Using APIC driver default
ACPI: RSDP 000F7070, 0014 (r0 TOSQCI)
ACPI: RSDT 57E8F4EF, 0038 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
ACPI: FACP 57E95D7C, 0074 (r1 ATI Bonefish 6040000 ATI F4240)
ACPI: DSDT 57E8FF4C, 5E30 (r1 TOSQCI L10 6040000 MSFT 2000002)
ACPI: FACS 57E96FC0, 0040
ACPI: APIC 57E95DF0, 005E (r1 PTLTD APIC 6040000 LTP 0)
ACPI: MCFG 57E95E4E, 003C (r1 PTLTD MCFG 6040000 LTP 0)
ACPI: SLIC 57E95E8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
ACPI: SSDT 57E8F527, 0535 (r1 PmRef CpuPm 3000 INTL 20050228)
ACPI: DMI detected: Toshiba
ATI board detected. Disabling timer routing over 8254.
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 60000000 (gap: 58000000:88000000)
swsusp: Registered nosave memory region: 000000000009d000 - 000000000009e000
swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000e4000
swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357251
Kernel command line: ro root=LABEL=/1 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07bd000 soft=c079d000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1600.026 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1419592k/1440256k available (2263k kernel code, 19312k
reserved, 1109k data, 292k init, 522752k highmem)
virtual kernel memory layout:
fixmap : 0xffc52000 - 0xfffff000 (3764 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
.init : 0xc0751000 - 0xc079a000 ( 292 kB)
.data : 0xc0635db8 - 0xc074b56c (1109 kB)
.text : 0xc0400000 - 0xc0635db8 (2263 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 3202.37 BogoMIPS (lpj=1601186)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000
0000c189 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940
0000c189 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... successfully read 21669 bytes
from /DSDT.aml.
ACPI: Table DSDT replaced by host OS
ACPI: DSDT 00000000, 54A5 (r1 TOSQCI L10 6040000 INTL 20061109)
ACPI: DSDT override uses original SSDTs unless
"acpi_no_auto_ssdt"CPU0: Intel Genuine Intel(R) CPU T2060 @
1.60GHz stepping 0c
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c07be000 soft=c079e000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3199.52 BogoMIPS (lpj=1599764)
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000
0000c189 00000000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9f3ff 00000000 00000000 00002940
0000c189 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c
Total of 2 processors activated (6401.90 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=336 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=488 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=176 bytes
sizeof(task_struct)=1680 bytes
CPU0 attaching sched-domain:
domain 0: span 00000003
groups: 00000001 00000002
CPU1 attaching sched-domain:
domain 0: span 00000003
groups: 00000002 00000001
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
Time: 2:11:42 Date: 04/02/08
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd494, last bus=14
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI Error (dswload-0664): [\___] Namespace lookup failure, AE_NOT_FOUND
ACPI Exception (psloop-0225): AE_NOT_FOUND, During name lookup/catalog
[20070126]
ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0._INI] (Node f781a6c0), AE_NOT_FOUND
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Time: tsc clocksource has been installed.
system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x200-0x20f has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0x530-0x537 has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd4-0xcd5 has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0xcd8-0xcdf has been reserved
system 00:08: ioport range 0x8000-0x805f could not be reserved
system 00:08: ioport range 0x8210-0x821f has been reserved
system 00:08: ioport range 0xf40-0xf47 has been reserved
system 00:08: ioport range 0x280-0x293 has been reserved
system 00:08: ioport range 0x87f-0x87f has been reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:09: iomem range 0xc0004800-0xc00057ff has been reserved
system 00:09: iomem range 0x0-0xfff could not be reserved
PCI: Bridge: 0000:00:01.0
IO window: 9000-9fff
MEM window: c0000000-c00fffff
PREFETCH window: d0000000-dfffffff
PCI: Bus 10, cardbus bridge: 0000:09:01.0
IO window: 0000a400-0000a4ff
IO window: 0000a800-0000a8ff
PREFETCH window: 64000000-67ffffff
MEM window: 68000000-6bffffff
PCI: Bridge: 0000:00:14.4
IO window: a000-afff
MEM window: c0100000-c01fffff
PREFETCH window: disabled.
PCI: Enabling device 0000:09:01.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 20 (level, low) -> IRQ 16
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 2639k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1207102301.744:1): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:05.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: SSDT 57E8FCDD, 01E8 (r1 PmRef Cpu0Ist 3000 INTL 20050228)
ACPI: SSDT 57E8FA5C, 01FC (r1 PmRef Cpu0Cst 3001 INTL 20050228)
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 57E8FEC5, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20050228)
ACPI: SSDT 57E8FC58, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THRM] (60 C)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
Switched to high resolution mode on CPU 1
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
input: Macintosh mouse button emulation as /class/input/input0
Yenta: CardBus bridge found at 0000:09:01.0 [1179:ff31]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:09:01.0, mfunc 0x00001002, devctl 0x44
Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
Socket status: 30000006
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0100000 - 0xc01fffff
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 4:959:155
Freeing unused kernel memory: 292k freed
Write protecting the kernel read-only data: 880k
ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 17
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xc0406000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 17, io mem 0xc0404000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 17
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 17, io mem 0xc0405000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
synaptics: Toshiba Satellite L35 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /class/input/input2
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
sata_sil 0000:00:12.0: version 2.3
PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 18
scsi0 : sata_sil
scsi1 : sata_sil
ata1: SATA max UDMA/100 mmio m512@0xc0407000 tf 0xc0407080 irq 18
ata2: SATA max UDMA/100 mmio m512@0xc0407000 tf 0xc04070c0 irq 18
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100
ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:14.1 to 64
ACPI: PCI interrupt for device 0000:00:14.1 disabled
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
scsi2 : pata_atiixp
scsi3 : pata_atiixp
ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
ata3: port disabled. ignoring.
ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33
ata4.00: configured for UDMA/33
scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1207102314.976:2): selinux=0 auid=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 3:0:0:0: Attached scsi generic sg1 type 5
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
input: PC Speaker as /class/input/input3
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: Battery Slot [BAT1] (battery present)
ACPI: AC Adapter [ACAD] (on-line)
input: Video Bus as /class/input/input4
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xf8918000, 00:1b:24:1e:9a:57, IRQ 21
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
input: Power Button (FF) as /class/input/input5
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input6
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input7
ACPI: Power Button (CM) [PWRB]
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 19
ALSA sound/pci/hda/hda_intel.c:732: codec_mask = 0xb
ALSA sound/pci/hda/hda_codec.c:2137: hda_codec: model '3stack' is selected
ALSA sound/pci/hda/patch_si3054.c:238: si3054: cannot initialize. EXT MID = 0000
ALSA sound/pci/hda/patch_si3054.c:250: Link Frame Detect(FDT) is not
ready (line status: 0000)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on sda4, internal journal
fuse init (API version 7.9)
Adding 3116600k swap on /dev/sda3. Priority:-1 extents:1 across:3116600k
IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
openser[1699]: segfault at 00000009 eip 0045a625 esp bf9347fc error 4
Bridge firewalling registered
virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
virbr0: starting userspace STP failed, starting kernel STP
virbr0: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
EXT3 FS on dm-0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
hda-intel: Invalid position buffer, using LPIB read method instead.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
WARNING: at lib/kref.c:33 kref_get() (Not tainted)
Pid: 69, comm: kacpi_notify Not tainted 2.6.24.3 #5
[<c04ff274>] kref_get+0x3d/0x45
[<c04fe65d>] kobject_get+0xf/0x13
[<c04fe84d>] kobject_add+0x82/0x176
[<c04fe9eb>] kobject_register+0x19/0x2d
[<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c05b03fd>] cpuidle_enable_device+0x31/0x9b
[<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
[<c0543ae2>] acpi_processor_notify+0x8b/0xf4
[<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
[<c0526630>] acpi_os_execute_notify+0x22/0x2b
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c043c212>] run_workqueue+0x7d/0x107
[<c043fa5b>] prepare_to_wait+0x28/0x45
[<c043c35a>] worker_thread+0xbe/0xca
[<c043f8ff>] autoremove_wake_function+0x0/0x35
[<c043c29c>] worker_thread+0x0/0xca
[<c043f679>] kthread+0x38/0x5d
[<c043f641>] kthread+0x0/0x5d
[<c0406477>] kernel_thread_helper+0x7/0x10
=======================
BUG: unable to handle kernel NULL pointer dereference at virtual
address 00000020
printing eip: c04c4716 *pde = 578c2067
Oops: 0000 [#1] SMP
Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U)
aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U)
bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U)
xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U)
cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U)
dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U)
snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U)
snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U)
snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U)
video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U)
i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U)
pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U)
scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U)
ehci_hcd(U)
Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)
EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0
EIP is at sysfs_addrm_start+0x21/0x81
EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000
ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)
Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000
00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d
f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8
Call Trace:
[<c04c4b45>] create_dir+0x33/0x6c
[<c04c4bab>] sysfs_create_dir+0x2d/0x40
[<c04fe65d>] kobject_get+0xf/0x13
[<c04fe8a8>] kobject_add+0xdd/0x176
[<c04fe9eb>] kobject_register+0x19/0x2d
[<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c05b03fd>] cpuidle_enable_device+0x31/0x9b
[<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
[<c0543ae2>] acpi_processor_notify+0x8b/0xf4
[<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
[<c0526630>] acpi_os_execute_notify+0x22/0x2b
[<c052660e>] acpi_os_execute_notify+0x0/0x2b
[<c043c212>] run_workqueue+0x7d/0x107
[<c043fa5b>] prepare_to_wait+0x28/0x45
[<c043c35a>] worker_thread+0xbe/0xca
[<c043f8ff>] autoremove_wake_function+0x0/0x35
[<c043c29c>] worker_thread+0x0/0xca
[<c043f679>] kthread+0x38/0x5d
[<c043f641>] kthread+0x0/0x5d
[<c0406477>] kernel_thread_helper+0x7/0x10
=======================
Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89
c6 83 ec 04 89 d3 31 c0 f3 ab b8 90 3f 72 c0 89 16 e8 6a cf 16 00 <8b>
53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff
EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4
---[ end trace 863306c7f7bb36f7 ]---
atkbd.c: Unknown key pressed (translated set 2, code 0x55 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 55 <keycode>' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x55 on isa0060/serio0).
atkbd.c: Use 'setkeycodes 55 <keycode>' to make it known.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-03-30 13:51 ` [>=2.6.23][BUG] Oops on power disconnection Sanjeev Aditya Naga
2008-03-31 4:00 ` Sanjeev Aditya Naga
@ 2008-04-02 7:14 ` Andrew Morton
2008-04-02 13:08 ` Sanjeev Aditya Naga
1 sibling, 1 reply; 13+ messages in thread
From: Andrew Morton @ 2008-04-02 7:14 UTC (permalink / raw)
To: Sanjeev Aditya Naga; +Cc: linux-kernel, linux-acpi, Venkatesh Pallipadi
On Sun, 30 Mar 2008 19:21:39 +0530 "Sanjeev Aditya Naga" <sanjeev.kernel@gmail.com> wrote:
> Hi,
>
> This happens everytime there is a power disconnection
> (switching to battery). Complete dmesg attached. This
> in particular is of kernel 2.6.24.3.
>
> Greetings,
> Kind Regards,
> Sanjeev
>
> BUG: unable to handle kernel NULL pointer dereference at virtual
> address 00000020
> printing eip: c04c4716 *pde = 578c2067
> Oops: 0000 [#1] SMP
> Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U)
> aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U)
> bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U)
> xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U)
> cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U)
> dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U)
> snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U)
> snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U)
> snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U)
> video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U)
> i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U)
> pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U)
> scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U)
> ehci_hcd(U)
>
> Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)
> EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0
> EIP is at sysfs_addrm_start+0x21/0x81
> EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000
> ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)
> Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000
> 00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d
> f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8
> Call Trace:
> [<c04c4b45>] create_dir+0x33/0x6c
> [<c04c4bab>] sysfs_create_dir+0x2d/0x40
> [<c04fe65d>] kobject_get+0xf/0x13
> [<c04fe8a8>] kobject_add+0xdd/0x176
> [<c04fe9eb>] kobject_register+0x19/0x2d
> [<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
> [<c052660e>] acpi_os_execute_notify+0x0/0x2b
> [<c05b03fd>] cpuidle_enable_device+0x31/0x9b
> [<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
> [<c0543ae2>] acpi_processor_notify+0x8b/0xf4
> [<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
> [<c0526630>] acpi_os_execute_notify+0x22/0x2b
> [<c052660e>] acpi_os_execute_notify+0x0/0x2b
> [<c043c212>] run_workqueue+0x7d/0x107
> [<c043fa5b>] prepare_to_wait+0x28/0x45
> [<c043c35a>] worker_thread+0xbe/0xca
> [<c043f8ff>] autoremove_wake_function+0x0/0x35
> [<c043c29c>] worker_thread+0x0/0xca
> [<c043f679>] kthread+0x38/0x5d
> [<c043f641>] kthread+0x0/0x5d
> [<c0406477>] kernel_thread_helper+0x7/0x10
> =======================
> Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89
> c6 83 ec 04 89 d3 31 c0 f3 ab b8 903f 72 c0 89 16 e8 6a cf 16 00 <8b>
> 53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff
> EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4
Looks like a cpuidle problem (or at least acpi).
I seem to recall having seen other reports of this?
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-04-02 7:14 ` Andrew Morton
@ 2008-04-02 13:08 ` Sanjeev Aditya Naga
2008-04-02 14:48 ` Thomas Renninger
0 siblings, 1 reply; 13+ messages in thread
From: Sanjeev Aditya Naga @ 2008-04-02 13:08 UTC (permalink / raw)
To: Andrew Morton; +Cc: linux-kernel, linux-acpi, Venkatesh Pallipadi
Hello Andrew Morton,
Greetings!
Thank you for the update. Is there anything I can do
from my side?
I thought it was a acpi (dsdt) problem. And based on
a tutorial, I have tried to extract, fix, recompile the dsdt
and use it with the kernel. But still I have the same problem.
Let me know if I shall attach the dsdt (original) decompiled
code, if that helps.
Kind Regards,
Sanjeev
On Wed, Apr 2, 2008 at 12:44 PM, Andrew Morton
<akpm@linux-foundation.org> wrote:
>
> On Sun, 30 Mar 2008 19:21:39 +0530 "Sanjeev Aditya Naga" <sanjeev.kernel@gmail.com> wrote:
>
> > Hi,
> >
> > This happens everytime there is a power disconnection
> > (switching to battery). Complete dmesg attached. This
> > in particular is of kernel 2.6.24.3.
> >
> > Greetings,
> > Kind Regards,
> > Sanjeev
> >
> > BUG: unable to handle kernel NULL pointer dereference at virtual
> > address 00000020
> > printing eip: c04c4716 *pde = 578c2067
> > Oops: 0000 [#1] SMP
> > Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U)
> > aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U)
> > bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U)
> > xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U)
> > cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U)
> > dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U)
> > snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U)
> > snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U)
> > snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U)
> > video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U)
> > i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U)
> > pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U)
> > scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U)
> > ehci_hcd(U)
> >
> > Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)
> > EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0
> > EIP is at sysfs_addrm_start+0x21/0x81
> > EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000
> > ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4
> > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)
> > Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000
> > 00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d
> > f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8
> > Call Trace:
> > [<c04c4b45>] create_dir+0x33/0x6c
> > [<c04c4bab>] sysfs_create_dir+0x2d/0x40
> > [<c04fe65d>] kobject_get+0xf/0x13
> > [<c04fe8a8>] kobject_add+0xdd/0x176
> > [<c04fe9eb>] kobject_register+0x19/0x2d
> > [<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
> > [<c052660e>] acpi_os_execute_notify+0x0/0x2b
> > [<c05b03fd>] cpuidle_enable_device+0x31/0x9b
> > [<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
> > [<c0543ae2>] acpi_processor_notify+0x8b/0xf4
> > [<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
> > [<c0526630>] acpi_os_execute_notify+0x22/0x2b
> > [<c052660e>] acpi_os_execute_notify+0x0/0x2b
> > [<c043c212>] run_workqueue+0x7d/0x107
> > [<c043fa5b>] prepare_to_wait+0x28/0x45
> > [<c043c35a>] worker_thread+0xbe/0xca
> > [<c043f8ff>] autoremove_wake_function+0x0/0x35
> > [<c043c29c>] worker_thread+0x0/0xca
> > [<c043f679>] kthread+0x38/0x5d
> > [<c043f641>] kthread+0x0/0x5d
> > [<c0406477>] kernel_thread_helper+0x7/0x10
> > =======================
> > Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89
> > c6 83 ec 04 89 d3 31 c0 f3 ab b8 903f 72 c0 89 16 e8 6a cf 16 00 <8b>
> > 53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff
> > EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4
>
> Looks like a cpuidle problem (or at least acpi).
>
> I seem to recall having seen other reports of this?
>
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-04-02 13:08 ` Sanjeev Aditya Naga
@ 2008-04-02 14:48 ` Thomas Renninger
2008-04-02 16:13 ` Sanjeev Aditya Naga
0 siblings, 1 reply; 13+ messages in thread
From: Thomas Renninger @ 2008-04-02 14:48 UTC (permalink / raw)
To: Sanjeev Aditya Naga
Cc: Andrew Morton, linux-kernel, linux-acpi, Venkatesh Pallipadi
Hi,
On Wed, 2008-04-02 at 18:38 +0530, Sanjeev Aditya Naga wrote:
> Hello Andrew Morton,
>
> Greetings!
>
> Thank you for the update. Is there anything I can do
> from my side?
>
> I thought it was a acpi (dsdt) problem. And based on
> a tutorial, I have tried to extract, fix, recompile the dsdt
> and use it with the kernel. But still I have the same problem.
> Let me know if I shall attach the dsdt (original) decompiled
> code, if that helps.
this could be due a general memory corruption problem through ACPICA.
If you get different backtraces on reboots even you only modified things
that do not have to do with the problem, it's probably that and related
to:
http://bugzilla.kernel.org/show_bug.cgi?id=10339
You might want to try the latest kernel or the patch posted there.
Thomas
> Kind Regards,
> Sanjeev
>
> On Wed, Apr 2, 2008 at 12:44 PM, Andrew Morton
> <akpm@linux-foundation.org> wrote:
> >
> > On Sun, 30 Mar 2008 19:21:39 +0530 "Sanjeev Aditya Naga" <sanjeev.kernel@gmail.com> wrote:
> >
> > > Hi,
> > >
> > > This happens everytime there is a power disconnection
> > > (switching to battery). Complete dmesg attached. This
> > > in particular is of kernel 2.6.24.3.
> > >
> > > Greetings,
> > > Kind Regards,
> > > Sanjeev
> > >
> > > BUG: unable to handle kernel NULL pointer dereference at virtual
> > > address 00000020
> > > printing eip: c04c4716 *pde = 578c2067
> > > Oops: 0000 [#1] SMP
> > > Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U)
> > > aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U)
> > > bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U)
> > > xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U)
> > > cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U)
> > > dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U)
> > > snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U)
> > > snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U)
> > > snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U)
> > > video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U)
> > > i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U)
> > > pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U)
> > > scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U)
> > > ehci_hcd(U)
> > >
> > > Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)
> > > EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0
> > > EIP is at sysfs_addrm_start+0x21/0x81
> > > EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000
> > > ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4
> > > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > > Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)
> > > Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000
> > > 00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d
> > > f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8
> > > Call Trace:
> > > [<c04c4b45>] create_dir+0x33/0x6c
> > > [<c04c4bab>] sysfs_create_dir+0x2d/0x40
> > > [<c04fe65d>] kobject_get+0xf/0x13
> > > [<c04fe8a8>] kobject_add+0xdd/0x176
> > > [<c04fe9eb>] kobject_register+0x19/0x2d
> > > [<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
> > > [<c052660e>] acpi_os_execute_notify+0x0/0x2b
> > > [<c05b03fd>] cpuidle_enable_device+0x31/0x9b
> > > [<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
> > > [<c0543ae2>] acpi_processor_notify+0x8b/0xf4
> > > [<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
> > > [<c0526630>] acpi_os_execute_notify+0x22/0x2b
> > > [<c052660e>] acpi_os_execute_notify+0x0/0x2b
> > > [<c043c212>] run_workqueue+0x7d/0x107
> > > [<c043fa5b>] prepare_to_wait+0x28/0x45
> > > [<c043c35a>] worker_thread+0xbe/0xca
> > > [<c043f8ff>] autoremove_wake_function+0x0/0x35
> > > [<c043c29c>] worker_thread+0x0/0xca
> > > [<c043f679>] kthread+0x38/0x5d
> > > [<c043f641>] kthread+0x0/0x5d
> > > [<c0406477>] kernel_thread_helper+0x7/0x10
> > > =======================
> > > Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89
> > > c6 83 ec 04 89 d3 31 c0 f3 ab b8 903f 72 c0 89 16 e8 6a cf 16 00 <8b>
> > > 53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff
> > > EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4
> >
> > Looks like a cpuidle problem (or at least acpi).
> >
> > I seem to recall having seen other reports of this?
Then it might be something else...
Thomas
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-04-02 14:48 ` Thomas Renninger
@ 2008-04-02 16:13 ` Sanjeev Aditya Naga
2008-04-02 18:12 ` Thomas Renninger
0 siblings, 1 reply; 13+ messages in thread
From: Sanjeev Aditya Naga @ 2008-04-02 16:13 UTC (permalink / raw)
To: trenn; +Cc: Andrew Morton, linux-kernel, linux-acpi, Venkatesh Pallipadi
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 5828 bytes --]
Hello Thomas,
> Hi,>>> On Wed, 2008-04-02 at 18:38 +0530, Sanjeev Aditya Naga wrote:> > Hello Andrew Morton,> >> > Greetings!> >> > Thank you for the update. Is there anything I can do> > from my side?> >> > I thought it was a acpi (dsdt) problem. And based on> > a tutorial, I have tried to extract, fix, recompile the dsdt> > and use it with the kernel. But still I have the same problem.> > Let me know if I shall attach the dsdt (original) decompiled> > code, if that helps.>> this could be due a general memory corruption problem through ACPICA.> If you get different backtraces on reboots even you only modified things> that do not have to do with the problem, it's probably that and related> to:> http://bugzilla.kernel.org/show_bug.cgi?id=10339>> You might want to try the latest kernel or the patch posted there.
Thank you for the update.I have checked the bug and unfortunately its not thesame issue. Things work absolutely fine, when I'mrunning on AC power. It even displays the exactbattery (and charging) status to me. It messes upwhen suddenly AC power gets disconnected andswitches to battery mode (The time when I get Oops).The system is still usable after switching to batterymode and I still get correct battery stats until itscompletely discharged. However most of the commandslike kill, poweroff, java doesn't work after the Oops.
BTW there is one similarity with the referenced bug.If I boot the computer without AC Power, it gives thesame Oops and stops during booting itself.
I shall try the latest kernel once and shall update you.
Kind Regards,Sanjeev
>> Thomas>>>> > Kind Regards,> > Sanjeev> >> > On Wed, Apr 2, 2008 at 12:44 PM, Andrew Morton> > <akpm@linux-foundation.org> wrote:> > >> > > On Sun, 30 Mar 2008 19:21:39 +0530 "Sanjeev Aditya Naga" <sanjeev.kernel@gmail.com> wrote:> > >> > > > Hi,> > > >> > > > This happens everytime there is a power disconnection> > > > (switching to battery). Complete dmesg attached. This> > > > in particular is of kernel 2.6.24.3.> > > >> > > > Greetings,> > > > Kind Regards,> > > > Sanjeev> > > >> > > > BUG: unable to handle kernel NULL pointer dereference at virtual> > > > address 00000020> > > > printing eip: c04c4716 *pde = 578c2067> > > > Oops: 0000 [#1] SMP> > > > Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U)> > > > aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U)> > > > bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U)> > > > xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U)> > > > cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U)> > > > dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U)> > > > snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U)> > > > snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U)> > > > snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U)> > > > video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U)> > > > i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U)> > > > pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U)> > > > scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U)> > > > ehci_hcd(U)> > > >> > > > Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)> > > > EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0> > > > EIP is at sysfs_addrm_start+0x21/0x81> > > > EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000> > > > ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4> > > > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068> > > > Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)> > > > Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000> > > > 00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d> > > > f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8> > > > Call Trace:> > > > [<c04c4b45>] create_dir+0x33/0x6c> > > > [<c04c4bab>] sysfs_create_dir+0x2d/0x40> > > > [<c04fe65d>] kobject_get+0xf/0x13> > > > [<c04fe8a8>] kobject_add+0xdd/0x176> > > > [<c04fe9eb>] kobject_register+0x19/0x2d> > > > [<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4> > > > [<c052660e>] acpi_os_execute_notify+0x0/0x2b> > > > [<c05b03fd>] cpuidle_enable_device+0x31/0x9b> > > > [<c0545923>] acpi_processor_cst_has_changed+0x40/0x55> > > > [<c0543ae2>] acpi_processor_notify+0x8b/0xf4> > > > [<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55> > > > [<c0526630>] acpi_os_execute_notify+0x22/0x2b> > > > [<c052660e>] acpi_os_execute_notify+0x0/0x2b> > > > [<c043c212>] run_workqueue+0x7d/0x107> > > > [<c043fa5b>] prepare_to_wait+0x28/0x45> > > > [<c043c35a>] worker_thread+0xbe/0xca> > > > [<c043f8ff>] autoremove_wake_function+0x0/0x35> > > > [<c043c29c>] worker_thread+0x0/0xca> > > > [<c043f679>] kthread+0x38/0x5d> > > > [<c043f641>] kthread+0x0/0x5d> > > > [<c0406477>] kernel_thread_helper+0x7/0x10> > > > =======================> > > > Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89> > > > c6 83 ec 04 89 d3 31 c0 f3 ab b8 903f 72 c0 89 16 e8 6a cf 16 00 <8b>> > > > 53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff> > > > EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4> > >> > > Looks like a cpuidle problem (or at least acpi).> > >> > > I seem to recall having seen other reports of this?> Then it might be something else...>> Thomas>>ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-04-02 16:13 ` Sanjeev Aditya Naga
@ 2008-04-02 18:12 ` Thomas Renninger
2008-04-03 16:15 ` Sanjeev Aditya Naga
0 siblings, 1 reply; 13+ messages in thread
From: Thomas Renninger @ 2008-04-02 18:12 UTC (permalink / raw)
To: Sanjeev Aditya Naga
Cc: Andrew Morton, linux-kernel, linux-acpi, Venkatesh Pallipadi
On Wed, 2008-04-02 at 21:43 +0530, Sanjeev Aditya Naga wrote:
> Hello Thomas,
>
> > Hi,
> >
> >
> > On Wed, 2008-04-02 at 18:38 +0530, Sanjeev Aditya Naga wrote:
> > > Hello Andrew Morton,
> > >
> > > Greetings!
> > >
> > > Thank you for the update. Is there anything I can do
> > > from my side?
> > >
> > > I thought it was a acpi (dsdt) problem. And based on
> > > a tutorial, I have tried to extract, fix, recompile the dsdt
> > > and use it with the kernel. But still I have the same problem.
> > > Let me know if I shall attach the dsdt (original) decompiled
> > > code, if that helps.
> >
> > this could be due a general memory corruption problem through ACPICA.
> > If you get different backtraces on reboots even you only modified things
> > that do not have to do with the problem, it's probably that and related
> > to:
> > http://bugzilla.kernel.org/show_bug.cgi?id=10339
> >
> > You might want to try the latest kernel or the patch posted there.
>
> Thank you for the update.
> I have checked the bug and unfortunately its not the
> same issue. Things work absolutely fine, when I'm
> running on AC power. It even displays the exact
> battery (and charging) status to me. It messes up
> when suddenly AC power gets disconnected and
> switches to battery mode (The time when I get Oops).
> The system is still usable after switching to battery
> mode and I still get correct battery stats until its
> completely discharged. However most of the commands
> like kill, poweroff, java doesn't work after the Oops.
The bug is not related to battery, but to AML parsing and can therefore
affect anything which is ACPI related.
> BTW there is one similarity with the referenced bug.
> If I boot the computer without AC Power, it gives the
> same Oops and stops during booting itself.
>
> I shall try the latest kernel once and shall update you.
That would be great.
If it works, please give the patch there a try, IMO this one should see
2.6.2[34].X stable kernels soon.
Thanks,
Thomas
>
> >
> > Thomas
> >
> >
> >
> > > Kind Regards,
> > > Sanjeev
> > >
> > > On Wed, Apr 2, 2008 at 12:44 PM, Andrew Morton
> > > <akpm@linux-foundation.org> wrote:
> > > >
> > > > On Sun, 30 Mar 2008 19:21:39 +0530 "Sanjeev Aditya Naga" <sanjeev.kernel@gmail.com> wrote:
> > > >
> > > > > Hi,
> > > > >
> > > > > This happens everytime there is a power disconnection
> > > > > (switching to battery). Complete dmesg attached. This
> > > > > in particular is of kernel 2.6.24.3.
> > > > >
> > > > > Greetings,
> > > > > Kind Regards,
> > > > > Sanjeev
> > > > >
> > > > > BUG: unable to handle kernel NULL pointer dereference at virtual
> > > > > address 00000020
> > > > > printing eip: c04c4716 *pde = 578c2067
> > > > > Oops: 0000 [#1] SMP
> > > > > Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U)
> > > > > aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U)
> > > > > bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U)
> > > > > xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U)
> > > > > cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U)
> > > > > dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U)
> > > > > snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U)
> > > > > snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U)
> > > > > snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U)
> > > > > video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U)
> > > > > i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U)
> > > > > pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U)
> > > > > scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U)
> > > > > ehci_hcd(U)
> > > > >
> > > > > Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)
> > > > > EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0
> > > > > EIP is at sysfs_addrm_start+0x21/0x81
> > > > > EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000
> > > > > ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4
> > > > > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > > > > Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)
> > > > > Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000
> > > > > 00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d
> > > > > f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8
> > > > > Call Trace:
> > > > > [<c04c4b45>] create_dir+0x33/0x6c
> > > > > [<c04c4bab>] sysfs_create_dir+0x2d/0x40
> > > > > [<c04fe65d>] kobject_get+0xf/0x13
> > > > > [<c04fe8a8>] kobject_add+0xdd/0x176
> > > > > [<c04fe9eb>] kobject_register+0x19/0x2d
> > > > > [<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
> > > > > [<c052660e>] acpi_os_execute_notify+0x0/0x2b
> > > > > [<c05b03fd>] cpuidle_enable_device+0x31/0x9b
> > > > > [<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
> > > > > [<c0543ae2>] acpi_processor_notify+0x8b/0xf4
> > > > > [<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
> > > > > [<c0526630>] acpi_os_execute_notify+0x22/0x2b
> > > > > [<c052660e>] acpi_os_execute_notify+0x0/0x2b
> > > > > [<c043c212>] run_workqueue+0x7d/0x107
> > > > > [<c043fa5b>] prepare_to_wait+0x28/0x45
> > > > > [<c043c35a>] worker_thread+0xbe/0xca
> > > > > [<c043f8ff>] autoremove_wake_function+0x0/0x35
> > > > > [<c043c29c>] worker_thread+0x0/0xca
> > > > > [<c043f679>] kthread+0x38/0x5d
> > > > > [<c043f641>] kthread+0x0/0x5d
> > > > > [<c0406477>] kernel_thread_helper+0x7/0x10
> > > > > =======================
> > > > > Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89
> > > > > c6 83 ec 04 89 d3 31 c0 f3 ab b8 903f 72 c0 89 16 e8 6a cf 16 00 <8b>
> > > > > 53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff
> > > > > EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4
> > > >
> > > > Looks like a cpuidle problem (or at least acpi).
> > > >
> > > > I seem to recall having seen other reports of this?
> > Then it might be something else...
> >
> > Thomas
> >
> >
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-04-02 18:12 ` Thomas Renninger
@ 2008-04-03 16:15 ` Sanjeev Aditya Naga
2008-04-03 21:04 ` Thomas Renninger
0 siblings, 1 reply; 13+ messages in thread
From: Sanjeev Aditya Naga @ 2008-04-03 16:15 UTC (permalink / raw)
To: trenn; +Cc: Andrew Morton, linux-kernel, linux-acpi, Venkatesh Pallipadi
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 38362 bytes --]
Hello Thomas,
On Wed, Apr 2, 2008 at 11:42 PM, Thomas Renninger <trenn@suse.de> wrote:>> On Wed, 2008-04-02 at 21:43 +0530, Sanjeev Aditya Naga wrote:> > Hello Thomas,> >> > > Hi,> > >> > >> > > On Wed, 2008-04-02 at 18:38 +0530, Sanjeev Aditya Naga wrote:> > > > Hello Andrew Morton,> > > >> > > > Greetings!> > > >> > > > Thank you for the update. Is there anything I can do> > > > from my side?> > > >> > > > I thought it was a acpi (dsdt) problem. And based on> > > > a tutorial, I have tried to extract, fix, recompile the dsdt> > > > and use it with the kernel. But still I have the same problem.> > > > Let me know if I shall attach the dsdt (original) decompiled> > > > code, if that helps.> > >> > > this could be due a general memory corruption problem through ACPICA.> > > If you get different backtraces on reboots even you only modified things> > > that do not have to do with the problem, it's probably that and related> > > to:> > > http://bugzilla.kernel.org/show_bug.cgi?id=10339> > >> > > You might want to try the latest kernel or the patch posted there.> >> > Thank you for the update.> > I have checked the bug and unfortunately its not the> > same issue. Things work absolutely fine, when I'm> > running on AC power. It even displays the exact> > battery (and charging) status to me. It messes up> > when suddenly AC power gets disconnected and> > switches to battery mode (The time when I get Oops).> > The system is still usable after switching to battery> > mode and I still get correct battery stats until its> > completely discharged. However most of the commands> > like kill, poweroff, java doesn't work after the Oops.> The bug is not related to battery, but to AML parsing and can therefore> affect anything which is ACPI related.>>> > BTW there is one similarity with the referenced bug.> > If I boot the computer without AC Power, it gives the> > same Oops and stops during booting itself.> >> > I shall try the latest kernel once and shall update you.> That would be great.> If it works, please give the patch there a try, IMO this one should see> 2.6.2[34].X stable kernels soon.
I have got the lastest kernel 2.6.25-rc8 today. I observed thatthe referenced patch is already in the kernel. However this didn'tsolve the problem in question. I get the same Oops on this kernelas well. Find the latest dmesg along with the Oops:
Regards,Sanjeev
------------[ cut here ]------------WARNING: at lib/kref.c:43 kref_get+0x17/0x1c()Modules linked in: wlan_scan_sta ath_rate_sample ath_pci wlanath_hal(P) sit tunnel4 ipv6 cbc aes_i586 aes_generic dm_cryptipt_MASQUERADE iptable_nat nf_nat bridge autofs4 nf_conntrack_ipv4xt_state nf_conntrack xt_tcpudp ipt_REJECT iptable_filter ip_tablesx_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_mirrordm_multipath dm_mod snd_hda_intel snd_seq_dummy snd_seq_osssnd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_osssnd_pcm snd_timer sr_mod video 8139cp snd_page_alloc 8139too snd_hwdepi2c_piix4 i2c_core pcspkr output snd battery soundcore ac mii joydevsg cdrom button pata_atiixp pata_acpi sata_sil ata_generic libatasd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [lastunloaded: microcode]Pid: 70, comm: kacpi_notify Tainted: P 2.6.25-rc8 #2 [<c0427dcc>] warn_on_slowpath+0x40/0x65 [<c043007b>] switch_uid+0x5a/0x70 [<c04147bc>] smp_call_function_single+0x27/0x47 [<c04f1610>] number+0x120/0x1e6 [<c04f1ed1>] vsnprintf+0x40a/0x447 [<c04ef103>] kref_get+0x17/0x1c [<c04ee6a0>] kobject_get+0xf/0x13 [<c04ee72f>] kobject_add_internal+0x42/0x13b [<c04ee8dc>] kobject_init_and_add+0x23/0x25 [<c0596b90>] cpuidle_add_state_sysfs+0x63/0xd7 [<c05144d4>] acpi_os_execute_deferred+0x0/0x25 [<c0596498>] cpuidle_enable_device+0x35/0xac [<c0531c28>] acpi_processor_cst_has_changed+0x40/0x54 [<c052fac1>] acpi_processor_notify+0x83/0xde [<c0519549>] acpi_ev_notify_dispatch+0x4c/0x57 [<c05144f1>] acpi_os_execute_deferred+0x1d/0x25 [<c0435441>] run_workqueue+0x74/0xef [<c0435572>] worker_thread+0xb6/0xc2 [<c0437f8a>] autoremove_wake_function+0x0/0x2d [<c04354bc>] worker_thread+0x0/0xc2 [<c0437d35>] kthread+0x38/0x5d [<c0437cfd>] kthread+0x0/0x5d [<c0406d47>] kernel_thread_helper+0x7/0x10 =======================---[ end trace c2cdf21b5cc60ed6 ]---
dmesg output:
Initializing cgroup subsys cpusetLinux version 2.6.25-rc8 (root@draksha.cultuzz.in) (gcc version 4.3.020080222 (Red Hat 4.3.0-0.11) (GCC) ) #2 SMP Mon Apr 7 11:37:36 IST2008BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved) BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000057e80000 (usable) BIOS-e820: 0000000057e80000 - 0000000057e96000 (ACPI data) BIOS-e820: 0000000057e96000 - 0000000057f00000 (ACPI NVS) BIOS-e820: 0000000057f00000 - 0000000058000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)510MB HIGHMEM available.896MB LOWMEM available.Scan SMP from c0000000 for 1024 bytes.Scan SMP from c009fc00 for 1024 bytes.Scan SMP from c00f0000 for 65536 bytes.found SMP MP-table at [c00f7130] 000f7130Entering add_active_range(0, 0, 360064) 0 entries of 256 usedZone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 360064Movable zone start PFN for each nodeearly_node_map[1] active PFN ranges 0: 0 -> 360064On node 0 totalpages: 360064 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 1021 pages used for memmap HighMem zone: 129667 pages, LIFO batch:31 Movable zone: 0 pages used for memmapDMI present.Using APIC driver defaultACPI: RSDP 000F7070, 0014 (r0 TOSQCI)ACPI: RSDT 57E8F4EF, 0038 (r1 TOSQCI TOSQCI00 6040000 LTP 0)ACPI: FACP 57E95D7C, 0074 (r1 ATI Bonefish 6040000 ATI F4240)ACPI: DSDT 57E8FF4C, 5E30 (r1 TOSQCI L10 6040000 MSFT 2000002)ACPI: FACS 57E96FC0, 0040ACPI: APIC 57E95DF0, 005E (r1 PTLTD APIC 6040000 LTP 0)ACPI: MCFG 57E95E4E, 003C (r1 PTLTD MCFG 6040000 LTP 0)ACPI: SLIC 57E95E8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0)ACPI: SSDT 57E8F527, 0535 (r1 PmRef CpuPm 3000 INTL 20050228)ACPI: DMI detected: ToshibaATI board detected. Disabling timer routing over 8254.ACPI: PM-Timer IO Port: 0x8008ACPI: Local APIC address 0xfee00000ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)Processor #0 6:14 APIC version 20ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)Processor #1 6:14 APIC version 20ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)Enabling APIC mode: Flat. Using 1 I/O APICsUsing ACPI (MADT) for SMP configuration informationAllocating PCI resources starting at 60000000 (gap: 58000000:88000000)PM: Registered nosave memory: 000000000009d000 - 000000000009e000PM: Registered nosave memory: 000000000009e000 - 00000000000a0000PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000PM: Registered nosave memory: 00000000000e4000 - 0000000000100000Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357251Kernel command line: ro root=LABEL=/1 rhgb quiet acpi_os="!Linux"acpi_os_name="Windows 2006"mapped APIC to ffffb000 (fee00000)mapped IOAPIC to ffffa000 (fec00000)Enabling fast FPU save and restore... done.Enabling unmasked SIMD FPU exception support... done.Initializing CPU#0CPU 0 irqstacks, hard=c07b0000 soft=c0790000PID hash table entries: 4096 (order: 12, 16384 bytes)Detected 1600.057 MHz processor.Console: colour VGA+ 80x25console [tty0] enabledDentry cache hash table entries: 131072 (order: 7, 524288 bytes)Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)Memory: 1419748k/1440256k available (2198k kernel code, 19260kreserved, 1127k data, 280k init, 522752k highmem)virtual kernel memory layout: fixmap : 0xffc52000 - 0xfffff000 (3764 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc0747000 - 0xc078d000 ( 280 kB) .data : 0xc0625b16 - 0xc073f7f0 (1127 kB) .text : 0xc0400000 - 0xc0625b16 (2198 kB)Checking if this processor honours the WP bit even in supervisor mode...Ok.CPA: page pool initialized 1 of 1 pages preallocatedSLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1Calibrating delay using timer specific routine.. 3203.40 BogoMIPS (lpj=1601701)Security Framework initializedSELinux: Initializing.SELinux: Starting in permissive modeselinux_register_security: Registering secondary module capabilityCapability LSM initialized as secondaryMount-cache hash table entries: 512Initializing cgroup subsys nsInitializing cgroup subsys cpuacctCPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 1024KCPU: Physical Processor ID: 0CPU: Processor Core ID: 0Intel machine check architecture supported.Intel machine check reporting enabled on CPU#0.using mwait in idle threads.Compat vDSO mapped to ffffe000.Checking 'hlt' instruction... OK.Early unpacking initramfs... doneACPI: Core revision 20070126ACPI: Overriding _OS definition to 'Windows 2006'ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.CPU0: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0cBooting processor 1/1 ip 4000CPU 1 irqstacks, hard=c07b1000 soft=c0791000Initializing CPU#1Calibrating delay using timer specific routine.. 3199.54 BogoMIPS (lpj=1599774)CPU: L1 I cache: 32K, L1 D cache: 32KCPU: L2 cache: 1024KCPU: Physical Processor ID: 0CPU: Processor Core ID: 1Intel machine check architecture supported.Intel machine check reporting enabled on CPU#1.CPU1: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0cTotal of 2 processors activated (6402.95 BogoMIPS).ENABLING IO-APIC IRQs..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1checking TSC synchronization [CPU#0 -> CPU#1]: passed.Brought up 2 CPUsCPU0 attaching sched-domain: domain 0: span 00000003 groups: 00000001 00000002CPU1 attaching sched-domain: domain 0: span 00000003 groups: 00000002 00000001net_namespace: 548 bytesBooting paravirtualized kernel on bare hardwareNET: Registered protocol family 16No dock devices found.ACPI: bus type pci registeredPCI: Using MMCONFIG for extended config spacePCI: Using configuration type 1Setting up standard PCI resourcesACPI: EC: Look up EC in DSDTACPI Error (dswload-0664): [\___] Namespace lookup failure, AE_NOT_FOUNDACPI Exception (psloop-0225): AE_NOT_FOUND, During name lookup/catalog[20070126]ACPI Error (psparse-0537): Method parse/execution failed[\_SB_.PCI0._INI] (Node f781a6c0), AE_NOT_FOUNDACPI: Interpreter enabledACPI: (supports S0 S3 S4 S5)ACPI: Using IOAPIC for interrupt routingACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62ACPI: EC: driver started in poll modeACPI: PCI Root Bridge [PCI0] (0000:00)PCI: Transparent bridge - 0000:00:14.4ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.Linux Plug and Play Support v0.97 (c) Adam Belaypnp: PnP ACPI initACPI: bus type pnp registered 00:09: mem resource (0xc0004800-0xc00057ff) overlaps 0000:00:01.0 BAR8 (0xc0000000-0xc00fffff), disablingpnp: PnP ACPI: found 10 devicesACPI: ACPI bus type pnp unregisteredusbcore: registered new interface driver usbfsusbcore: registered new interface driver hubusbcore: registered new device driver usbPCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq". If it helps, post a reportNetLabel: InitializingNetLabel: domain hash size = 128NetLabel: protocols = UNLABELED CIPSOv4NetLabel: unlabeled traffic allowed by defaultsystem 00:01: iomem range 0xe0000000-0xefffffff could not be reservedsystem 00:08: ioport range 0x1080-0x1080 has been reservedsystem 00:08: ioport range 0x200-0x20f has been reservedsystem 00:08: ioport range 0x40b-0x40b has been reservedsystem 00:08: ioport range 0x4d0-0x4d1 has been reservedsystem 00:08: ioport range 0x4d6-0x4d6 has been reservedsystem 00:08: ioport range 0x530-0x537 has been reservedsystem 00:08: ioport range 0xc00-0xc01 has been reservedsystem 00:08: ioport range 0xc14-0xc14 has been reservedsystem 00:08: ioport range 0xc50-0xc52 has been reservedsystem 00:08: ioport range 0xc6c-0xc6c has been reservedsystem 00:08: ioport range 0xc6f-0xc6f has been reservedsystem 00:08: ioport range 0xcd4-0xcd5 has been reservedsystem 00:08: ioport range 0xcd6-0xcd7 has been reservedsystem 00:08: ioport range 0xcd8-0xcdf has been reservedsystem 00:08: ioport range 0x8000-0x805f could not be reservedsystem 00:08: ioport range 0x8210-0x821f has been reservedsystem 00:08: ioport range 0xf40-0xf47 has been reservedsystem 00:08: ioport range 0x280-0x293 has been reservedsystem 00:08: ioport range 0x87f-0x87f has been reservedsystem 00:09: iomem range 0xe0000-0xfffff could not be reservedsystem 00:09: iomem range 0xfff00000-0xffffffff could not be reservedsystem 00:09: iomem range 0x0-0xfff could not be reservedPCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: 0xc0000000-0xc00fffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffffPCI: Bus 10, cardbus bridge: 0000:09:01.0 IO window: 0x0000a400-0x0000a4ff IO window: 0x0000a800-0x0000a8ff PREFETCH window: 0x60000000-0x63ffffff MEM window: 0x64000000-0x67ffffffPCI: Bridge: 0000:00:14.4 IO window: a000-afff MEM window: 0xc0100000-0xc01fffff PREFETCH window: 0x0000000060000000-0x0000000063ffffffPCI: Enabling device 0000:09:01.0 (0000 -> 0003)ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 20 (level, low) -> IRQ 20NET: Registered protocol family 2IP route cache hash table entries: 32768 (order: 5, 131072 bytes)TCP established hash table entries: 131072 (order: 8, 1048576 bytes)TCP bind hash table entries: 65536 (order: 7, 524288 bytes)TCP: Hash tables configured (established 131072 bind 65536)TCP reno registeredchecking if image is initramfs... it isFreeing initrd memory: 2618k freedapm: BIOS not found.audit: initializing netlink socket (disabled)type=2000 audit(1207624959.772:1): initializedhighmem bounce pool size: 64 pagesTotal HugeTLB memory allocated, 0VFS: Disk quotas dquot_6.5.1Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)SELinux: Registering netfilter hooksBlock layer SCSI generic (bsg) driver version 0.4 loaded (major 253)io scheduler noop registeredio scheduler anticipatory registeredio scheduler deadline registeredio scheduler cfq registered (default)pci 0000:01:05.0: Boot video devicepci_hotplug: PCI Hot Plug PCI Core version: 0.5ACPI: SSDT 57E8FCDD, 01E8 (r1 PmRef Cpu0Ist 3000 INTL 20050228)ACPI: SSDT 57E8FA5C, 01FC (r1 PmRef Cpu0Cst 3001 INTL 20050228)ACPI: ACPI0007:00 is registered as cooling_device0ACPI: Processor [CPU0] (supports 8 throttling states)ACPI: SSDT 57E8FEC5, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20050228)ACPI: SSDT 57E8FC58, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)ACPI: ACPI0007:01 is registered as cooling_device1ACPI: Processor [CPU1] (supports 8 throttling states)ACPI: LNXTHERM:01 is registered as thermal_zone0ACPI: EC: non-query interrupt received, switching to interrupt modeACPI: Thermal Zone [THRM] (41 C)isapnp: Scanning for PnP cards...Switched to high resolution mode on CPU 1Switched to high resolution mode on CPU 0isapnp: No Plug & Play device foundReal Time Clock Driver v1.12acNon-volatile memory driver v1.2Linux agpgart interface v0.103Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabledbrd: module loadedinput: Macintosh mouse button emulation as /devices/virtual/input/input0Yenta: CardBus bridge found at 0000:09:01.0 [1179:ff31]Yenta: Using CSCINT to route CSC interrupts to PCIYenta: Routing CardBus interrupts to PCIYenta TI: socket 0000:09:01.0, mfunc 0x00001002, devctl 0x44Yenta: ISA IRQ mask 0x0cf8, PCI irq 20Socket status: 30000006pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafffcs: IO port probe 0xa000-0xafff: clean.pcmcia: parent PCI bridge Memory window: 0xc0100000 - 0xc01fffffpcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffffPNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12serio: i8042 KBD port at 0x60,0x64 irq 1serio: i8042 AUX port at 0x60,0x64 irq 12mice: PS/2 mouse device common for all miceinput: AT Translated Set 2 keyboard as/devices/platform/i8042/serio0/input/input1cpuidle: using governor laddercpuidle: using governor menuusbcore: registered new interface driver hiddevusbcore: registered new interface driver usbhiddrivers/hid/usbhid/hid-core.c: v2.6:USB HID core driverTCP cubic registeredInitializing XFRM netlink socketNET: Registered protocol family 1NET: Registered protocol family 17Using IPI No-Shortcut moderegistered taskstats version 1Freeing unused kernel memory: 280k freedWrite protecting the kernel read-only data: 916kACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19ehci_hcd 0000:00:13.2: EHCI Host Controllerehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0406000ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004usb usb1: configuration #1 chosen from 1 choicehub 1-0:1.0: USB hub foundhub 1-0:1.0: 8 ports detectedusb usb1: New USB device found, idVendor=1d6b, idProduct=0002usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb1: Product: EHCI Host Controllerusb usb1: Manufacturer: Linux 2.6.25-rc8 ehci_hcdusb usb1: SerialNumber: 0000:00:13.2ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) DriverACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19ohci_hcd 0000:00:13.0: OHCI Host Controllerohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0404000usb usb2: configuration #1 chosen from 1 choicehub 2-0:1.0: USB hub foundhub 2-0:1.0: 4 ports detectedusb usb2: New USB device found, idVendor=1d6b, idProduct=0001usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb2: Product: OHCI Host Controllerusb usb2: Manufacturer: Linux 2.6.25-rc8 ohci_hcdusb usb2: SerialNumber: 0000:00:13.0ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19ohci_hcd 0000:00:13.1: OHCI Host Controllerohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0405000usb usb3: configuration #1 chosen from 1 choicehub 3-0:1.0: USB hub foundhub 3-0:1.0: 4 ports detectedSynaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0synaptics: Toshiba Satellite L35 detected, limiting rate to 40pps.input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2usb usb3: New USB device found, idVendor=1d6b, idProduct=0001usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1usb usb3: Product: OHCI Host Controllerusb usb3: Manufacturer: Linux 2.6.25-rc8 ohci_hcdusb usb3: SerialNumber: 0000:00:13.1USB Universal Host Controller Interface driver v3.0SCSI subsystem initializedDriver 'sd' needs updating - please use bus_type methodslibata version 3.00 loaded.sata_sil 0000:00:12.0: version 2.3PCI: Enabling device 0000:00:12.0 (0005 -> 0007)ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22scsi0 : sata_silscsi1 : sata_silata1: SATA max UDMA/100 mmio m512@0xc0407000 tf 0xc0407080 irq 22ata2: SATA max UDMA/100 mmio m512@0xc0407000 tf 0xc04070c0 irq 22ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)ata1.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)ata1.00: configured for UDMA/100ata2: SATA link down (SStatus 0 SControl 300)scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn'tsupport DPO or FUAsd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)sd 0:0:0:0: [sda] Write Protect is offsd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn'tsupport DPO or FUA sda: sda1 sda2 sda3 sda4sd 0:0:0:0: [sda] Attached SCSI diskACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16PCI: Setting latency timer of device 0000:00:14.1 to 64ACPI: PCI interrupt for device 0000:00:14.1 disabledACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16scsi2 : pata_atiixpscsi3 : pata_atiixpata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15ata3: port disabled. ignoring.ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33ata4.00: configured for UDMA/33scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5EXT3-fs: INFO: recovery required on readonly filesystem.EXT3-fs: write access will be enabled during recovery.kjournald starting. Commit interval 5 secondsEXT3-fs: recovery complete.EXT3-fs: mounted filesystem with ordered data mode.SELinux: Disabled at runtime.SELinux: Unregistering netfilter hookstype=1404 audit(1207624975.849:2): selinux=0 auid=4294967295 ses=4294967295input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3ACPI: Power Button (FF) [PWRF]input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4ACPI: Lid Switch [LID]input: Power Button (CM) as/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5ACPI: Power Button (CM) [PWRB]sd 0:0:0:0: Attached scsi generic sg0 type 0scsi 3:0:0:0: Attached scsi generic sg1 type 5ACPI: AC Adapter [ACAD] (on-line)input: PC Speaker as /devices/platform/pcspkr/input/input6cs: IO port probe 0x100-0x3af: clean.cs: IO port probe 0x3e0-0x4ff: clean.cs: IO port probe 0x820-0x8ff: clean.cs: IO port probe 0xc00-0xcf7: clean.cs: IO port probe 0xa00-0xaff: clean.piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device8139too Fast Ethernet driver 0.9.28ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 21eth0: RealTek RTL8139 at 0xf8914000, 00:1b:24:1e:9a:57, IRQ 21eth0: Identified 8139 chip type 'RTL-8100B/8139D'ACPI: Battery Slot [BAT1] (battery present)8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)Driver 'sr' needs updating - please use bus_type methodssr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda trayUniform CD-ROM driver Revision: 3.20sr 3:0:0:0: Attached scsi CD-ROM sr0ACPI: device:1d is registered as cooling_device2input: Video Bus as/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1a/device:1b/input/input7ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16ALSA sound/pci/hda/hda_intel.c:1813: chipset global capabilities = 0x4401ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0xbALSA sound/pci/hda/hda_codec.c:2214: hda_codec: model '3stack' is selectedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave SurroundPlayback Volume, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Center PlaybackVolume, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave LFE PlaybackVolume, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Side PlaybackVolume, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave HeadphonePlayback Volume, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave SpeakerPlayback Volume, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Mono PlaybackVolume, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Line-OutPlayback Volume, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave SurroundPlayback Switch, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Center PlaybackSwitch, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave LFE PlaybackSwitch, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Side PlaybackSwitch, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave SpeakerPlayback Switch, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Mono PlaybackSwitch, skippedALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave IEC958 PlaybackSwitch, skippeddevice-mapper: uevent: version 1.0.3device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.comdevice-mapper: multipath: version 1.0.5 loadedloop: module loadedEXT3 FS on sda4, internal journalfuse init (API version 7.9)Adding 3116600k swap on /dev/sda3. Priority:-1 extents:1 across:3116600kIA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>ip_tables: (C) 2000-2006 Netfilter Core Teamnf_conntrack version 0.5.0 (16384 buckets, 65536 max)openser[1791]: segfault at 9 ip 0045a625 sp bf89948c error 4 inlibc-2.7.90.so[3e2000+169000]Bridge firewalling registeredvirbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.virbr0: starting userspace STP failed, starting kernel STPkjournald starting. Commit interval 5 secondsEXT3-fs warning: maximal mount count reached, running e2fsck is recommendedEXT3 FS on dm-0, internal journalEXT3-fs: mounted filesystem with ordered data mode.warning: `pulseaudio' uses 32-bit capabilities (legacy support in use)ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400,fragsize=0x1100, format=0x4011ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x5,stream=0x5, channel=0, format=0x4011hda-intel: Invalid position buffer, using LPIB read method instead.ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400,fragsize=0x1100, format=0x4011ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x9,stream=0x1, channel=0, format=0x4011ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400,fragsize=0x1100, format=0x4011ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x9,stream=0x1, channel=0, format=0x4011ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x9,stream=0x0, channel=0, format=0x0NET: Registered protocol family 10lo: Disabled Privacy ExtensionsALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x3,stream=0x0, channel=0, format=0x0ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x4,stream=0x0, channel=0, format=0x0ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x5,stream=0x0, channel=0, format=0x0IPv6 over IPv4 tunneling driversit0: Disabled Privacy Extensionseth0: link downADDRCONF(NETDEV_UP): eth0: link is not readyath_hal: module license 'Proprietary' taints kernel.ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112,RF2413, RF5413, RF2133)wlan: svn r3349ath_pci: svn r3349ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 22 (level, low) -> IRQ 22MadWifi: ath_attach: Switching rfkill capability offath_rate_sample: 1.2 (svn r3349)MadWifi: ath_attach: Switching per-packet transmit power control offwifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbpswifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps24Mbps 36Mbps 48Mbps 54Mbpswifi0: H/W encryption support: WEP AES AES_CCM TKIPwifi0: ath_announce: Use hw queue 1 for WME_AC_BE trafficwifi0: ath_announce: Use hw queue 0 for WME_AC_BK trafficwifi0: ath_announce: Use hw queue 2 for WME_AC_VI trafficwifi0: ath_announce: Use hw queue 3 for WME_AC_VO trafficwifi0: ath_announce: Use hw queue 8 for CAB trafficwifi0: ath_announce: Use hw queue 9 for beaconsath_pci: wifi0: Atheros 5212: mem=0xc0110000, irq=22udev: renamed network interface ath0 to wlan0wlan0: no IPv6 routers presentALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400,fragsize=0x1100, format=0x4011ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x4,stream=0x0, channel=0, format=0x0ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x5,stream=0x0, channel=0, format=0x0------------[ cut here ]------------WARNING: at lib/kref.c:43 kref_get+0x17/0x1c()Modules linked in: wlan_scan_sta ath_rate_sample ath_pci wlanath_hal(P) sit tunnel4 ipv6 cbc aes_i586 aes_generic dm_cryptipt_MASQUERADE iptable_nat nf_nat bridge autofs4 nf_conntrack_ipv4xt_state nf_conntrack xt_tcpudp ipt_REJECT iptable_filter ip_tablesx_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_mirrordm_multipath dm_mod snd_hda_intel snd_seq_dummy snd_seq_osssnd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_osssnd_pcm snd_timer sr_mod video 8139cp snd_page_alloc 8139too snd_hwdepi2c_piix4 i2c_core pcspkr output snd battery soundcore ac mii joydevsg cdrom button pata_atiixp pata_acpi sata_sil ata_generic libatasd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [lastunloaded: microcode]Pid: 70, comm: kacpi_notify Tainted: P 2.6.25-rc8 #2 [<c0427dcc>] warn_on_slowpath+0x40/0x65 [<c043007b>] switch_uid+0x5a/0x70 [<c04147bc>] smp_call_function_single+0x27/0x47 [<c04f1610>] number+0x120/0x1e6 [<c04f1ed1>] vsnprintf+0x40a/0x447 [<c04ef103>] kref_get+0x17/0x1c [<c04ee6a0>] kobject_get+0xf/0x13 [<c04ee72f>] kobject_add_internal+0x42/0x13b [<c04ee8dc>] kobject_init_and_add+0x23/0x25 [<c0596b90>] cpuidle_add_state_sysfs+0x63/0xd7 [<c05144d4>] acpi_os_execute_deferred+0x0/0x25 [<c0596498>] cpuidle_enable_device+0x35/0xac [<c0531c28>] acpi_processor_cst_has_changed+0x40/0x54 [<c052fac1>] acpi_processor_notify+0x83/0xde [<c0519549>] acpi_ev_notify_dispatch+0x4c/0x57 [<c05144f1>] acpi_os_execute_deferred+0x1d/0x25 [<c0435441>] run_workqueue+0x74/0xef [<c0435572>] worker_thread+0xb6/0xc2 [<c0437f8a>] autoremove_wake_function+0x0/0x2d [<c04354bc>] worker_thread+0x0/0xc2 [<c0437d35>] kthread+0x38/0x5d [<c0437cfd>] kthread+0x0/0x5d [<c0406d47>] kernel_thread_helper+0x7/0x10 =======================---[ end trace c2cdf21b5cc60ed6 ]---BUG: unable to handle kernel NULL pointer dereference at 00000020IP: [<c04b56d0>] sysfs_addrm_start+0x1e/0x7a*pde = 5784d067Oops: 0000 [#1] SMPModules linked in: wlan_scan_sta ath_rate_sample ath_pci wlanath_hal(P) sit tunnel4 ipv6 cbc aes_i586 aes_generic dm_cryptipt_MASQUERADE iptable_nat nf_nat bridge autofs4 nf_conntrack_ipv4xt_state nf_conntrack xt_tcpudp ipt_REJECT iptable_filter ip_tablesx_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_mirrordm_multipath dm_mod snd_hda_intel snd_seq_dummy snd_seq_osssnd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_osssnd_pcm snd_timer sr_mod video 8139cp snd_page_alloc 8139too snd_hwdepi2c_piix4 i2c_core pcspkr output snd battery soundcore ac mii joydevsg cdrom button pata_atiixp pata_acpi sata_sil ata_generic libatasd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [lastunloaded: microcode]
Pid: 70, comm: kacpi_notify Tainted: P (2.6.25-rc8 #2)EIP: 0060:[<c04b56d0>] EFLAGS: 00010246 CPU: 1EIP is at sysfs_addrm_start+0x1e/0x7aEAX: 41ed0000 EBX: 00000000 ECX: 00000000 EDX: 00000246ESI: f7873ee0 EDI: f7873ef0 EBP: 00000000 ESP: f7873ed0 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068Process kacpi_notify (pid: 70, ti=f7873000 task=f78874d0 task.ti=f7873000)Stack: f2d86c94 f71484b0 fffffff4 c04b5af4 00000000 00000000 00000000 00000000 f2d86c94 fffffffe f2d86c94 f7a9001c c04b5b56 f7873f08 c04ee6a0 f2d86c94 c04ee78f f7a90318 f2d86c80 00000000 f2d86c94 f7a9001c c04ee8dc f7873f44Call Trace: [<c04b5af4>] create_dir+0x33/0x6c [<c04b5b56>] sysfs_create_dir+0x29/0x3b [<c04ee6a0>] kobject_get+0xf/0x13 [<c04ee78f>] kobject_add_internal+0xa2/0x13b [<c04ee8dc>] kobject_init_and_add+0x23/0x25 [<c0596b90>] cpuidle_add_state_sysfs+0x63/0xd7 [<c05144d4>] acpi_os_execute_deferred+0x0/0x25 [<c0596498>] cpuidle_enable_device+0x35/0xac [<c0531c28>] acpi_processor_cst_has_changed+0x40/0x54 [<c052fac1>] acpi_processor_notify+0x83/0xde [<c0519549>] acpi_ev_notify_dispatch+0x4c/0x57 [<c05144f1>] acpi_os_execute_deferred+0x1d/0x25 [<c0435441>] run_workqueue+0x74/0xef [<c0435572>] worker_thread+0xb6/0xc2 [<c0437f8a>] autoremove_wake_function+0x0/0x2d [<c04354bc>] worker_thread+0x0/0xc2 [<c0437d35>] kthread+0x38/0x5d [<c0437cfd>] kthread+0x0/0x5d [<c0406d47>] kernel_thread_helper+0x7/0x10 =======================Code: 75 ee 89 56 0c 31 c0 89 31 5b 5e 5f c3 57 b9 04 00 00 00 56 89c7 53 89 c6 89 d3 31 c0 f3 ab b8 34 83 71 c0 89 16 e8 57 bd 16 00 <8b>53 20 b9 8c 53 4b c0 a1 88 54 83 c0 53 e8 a6 7f fd ff 5b 85EIP: [<c04b56d0>] sysfs_addrm_start+0x1e/0x7a SS:ESP 0068:f7873ed0---[ end trace c2cdf21b5cc60ed6 ]---
>> Thanks,>> Thomas>>>> >> > >> > > Thomas> > >> > >> > >> > > > Kind Regards,> > > > Sanjeev> > > >> > > > On Wed, Apr 2, 2008 at 12:44 PM, Andrew Morton> > > > <akpm@linux-foundation.org> wrote:> > > > >> > > > > On Sun, 30 Mar 2008 19:21:39 +0530 "Sanjeev Aditya Naga" <sanjeev.kernel@gmail.com> wrote:> > > > >> > > > > > Hi,> > > > > >> > > > > > This happens everytime there is a power disconnection> > > > > > (switching to battery). Complete dmesg attached. This> > > > > > in particular is of kernel 2.6.24.3.> > > > > >> > > > > > Greetings,> > > > > > Kind Regards,> > > > > > Sanjeev> > > > > >> > > > > > BUG: unable to handle kernel NULL pointer dereference at virtual> > > > > > address 00000020> > > > > > printing eip: c04c4716 *pde = 578c2067> > > > > > Oops: 0000 [#1] SMP> > > > > > Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U)> > > > > > aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U)> > > > > > bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U)> > > > > > xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U)> > > > > > cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U)> > > > > > dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U)> > > > > > snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U)> > > > > > snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U)> > > > > > snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U)> > > > > > video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U)> > > > > > i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U)> > > > > > pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U)> > > > > > scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U)> > > > > > ehci_hcd(U)> > > > > >> > > > > > Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)> > > > > > EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0> > > > > > EIP is at sysfs_addrm_start+0x21/0x81> > > > > > EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000> > > > > > ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4> > > > > > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068> > > > > > Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)> > > > > > Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000> > > > > > 00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d> > > > > > f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8> > > > > > Call Trace:> > > > > > [<c04c4b45>] create_dir+0x33/0x6c> > > > > > [<c04c4bab>] sysfs_create_dir+0x2d/0x40> > > > > > [<c04fe65d>] kobject_get+0xf/0x13> > > > > > [<c04fe8a8>] kobject_add+0xdd/0x176> > > > > > [<c04fe9eb>] kobject_register+0x19/0x2d> > > > > > [<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4> > > > > > [<c052660e>] acpi_os_execute_notify+0x0/0x2b> > > > > > [<c05b03fd>] cpuidle_enable_device+0x31/0x9b> > > > > > [<c0545923>] acpi_processor_cst_has_changed+0x40/0x55> > > > > > [<c0543ae2>] acpi_processor_notify+0x8b/0xf4> > > > > > [<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55> > > > > > [<c0526630>] acpi_os_execute_notify+0x22/0x2b> > > > > > [<c052660e>] acpi_os_execute_notify+0x0/0x2b> > > > > > [<c043c212>] run_workqueue+0x7d/0x107> > > > > > [<c043fa5b>] prepare_to_wait+0x28/0x45> > > > > > [<c043c35a>] worker_thread+0xbe/0xca> > > > > > [<c043f8ff>] autoremove_wake_function+0x0/0x35> > > > > > [<c043c29c>] worker_thread+0x0/0xca> > > > > > [<c043f679>] kthread+0x38/0x5d> > > > > > [<c043f641>] kthread+0x0/0x5d> > > > > > [<c0406477>] kernel_thread_helper+0x7/0x10> > > > > > =======================> > > > > > Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89> > > > > > c6 83 ec 04 89 d3 31 c0 f3 ab b8 903f 72 c0 89 16 e8 6a cf 16 00 <8b>> > > > > > 53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff> > > > > > EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4> > > > >> > > > > Looks like a cpuidle problem (or at least acpi).> > > > >> > > > > I seem to recall having seen other reports of this?> > > Then it might be something else...> > >> > > Thomas> > >> > >>>ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-04-03 16:15 ` Sanjeev Aditya Naga
@ 2008-04-03 21:04 ` Thomas Renninger
2008-04-04 0:31 ` Pallipadi, Venkatesh
2008-04-05 13:15 ` Sanjeev Aditya Naga
0 siblings, 2 replies; 13+ messages in thread
From: Thomas Renninger @ 2008-04-03 21:04 UTC (permalink / raw)
To: Sanjeev Aditya Naga
Cc: Andrew Morton, linux-kernel, linux-acpi, Venkatesh Pallipadi, Li,
Shaohua
On Thu, 2008-04-03 at 21:45 +0530, Sanjeev Aditya Naga wrote:
> Hello Thomas,
>
> On Wed, Apr 2, 2008 at 11:42 PM, Thomas Renninger <trenn@suse.de> wrote:
> >
> > On Wed, 2008-04-02 at 21:43 +0530, Sanjeev Aditya Naga wrote:
> > > Hello Thomas,
> > >
> > > > Hi,
> > > >
> > > >
> > > > On Wed, 2008-04-02 at 18:38 +0530, Sanjeev Aditya Naga wrote:
> > > > > Hello Andrew Morton,
> > > > >
> > > > > Greetings!
> > > > >
> > > > > Thank you for the update. Is there anything I can do
> > > > > from my side?
> > > > >
> > > > > I thought it was a acpi (dsdt) problem. And based on
> > > > > a tutorial, I have tried to extract, fix, recompile the dsdt
> > > > > and use it with the kernel. But still I have the same problem.
> > > > > Let me know if I shall attach the dsdt (original) decompiled
> > > > > code, if that helps.
> > > >
> > > > this could be due a general memory corruption problem through ACPICA.
> > > > If you get different backtraces on reboots even you only modified things
> > > > that do not have to do with the problem, it's probably that and related
> > > > to:
> > > > http://bugzilla.kernel.org/show_bug.cgi?id=10339
> > > >
> > > > You might want to try the latest kernel or the patch posted there.
> > >
> > > Thank you for the update.
> > > I have checked the bug and unfortunately its not the
> > > same issue. Things work absolutely fine, when I'm
> > > running on AC power. It even displays the exact
> > > battery (and charging) status to me. It messes up
> > > when suddenly AC power gets disconnected and
> > > switches to battery mode (The time when I get Oops).
> > > The system is still usable after switching to battery
> > > mode and I still get correct battery stats until its
> > > completely discharged. However most of the commands
> > > like kill, poweroff, java doesn't work after the Oops.
> > The bug is not related to battery, but to AML parsing and can therefore
> > affect anything which is ACPI related.
> >
> >
> > > BTW there is one similarity with the referenced bug.
> > > If I boot the computer without AC Power, it gives the
> > > same Oops and stops during booting itself.
> > >
> > > I shall try the latest kernel once and shall update you.
> > That would be great.
> > If it works, please give the patch there a try, IMO this one should see
> > 2.6.2[34].X stable kernels soon.
>
> I have got the lastest kernel 2.6.25-rc8 today. I observed that
> the referenced patch is already in the kernel. However this didn't
> solve the problem in question. I get the same Oops on this kernel
> as well. Find the latest dmesg along with the Oops:
Ok.
Maybe best is you document the backtraces/oopses with kernel versions at
bugzilla.kernel.org and add dmesg and acpidump.
It seems your machine notifies OS that the C-state table changed.
AFAIK this is rare and there might be a general bug in the cpuidle layer
which I do not know well.
Best you add Venkatesh and Shaohua Li <shaohua.li@intel.com> to CC of
the bug.
While the backtrace shows a lot, cpuidle IMO is missing a general debug
option like in the cpufreq layer.
I couldn't find a single printk in the whole cpuidle/{cpuidle,sysfs}.c
files, even on error paths. Also in the cpuidle specific parts of
drivers/acpi/processor_idle.c some debug printks may help for future bug
reports. It is very hard to guess what happened...
Thomas
> Regards,
> Sanjeev
>
> ------------[ cut here ]------------
> WARNING: at lib/kref.c:43 kref_get+0x17/0x1c()
> Modules linked in: wlan_scan_sta ath_rate_sample ath_pci wlan
> ath_hal(P) sit tunnel4 ipv6 cbc aes_i586 aes_generic dm_crypt
> ipt_MASQUERADE iptable_nat nf_nat bridge autofs4 nf_conntrack_ipv4
> xt_state nf_conntrack xt_tcpudp ipt_REJECT iptable_filter ip_tables
> x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_mirror
> dm_multipath dm_mod snd_hda_intel snd_seq_dummy snd_seq_oss
> snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss
> snd_pcm snd_timer sr_mod video 8139cp snd_page_alloc 8139too snd_hwdep
> i2c_piix4 i2c_core pcspkr output snd battery soundcore ac mii joydev
> sg cdrom button pata_atiixp pata_acpi sata_sil ata_generic libata
> sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last
> unloaded: microcode]
> Pid: 70, comm: kacpi_notify Tainted: P 2.6.25-rc8 #2
> [<c0427dcc>] warn_on_slowpath+0x40/0x65
> [<c043007b>] switch_uid+0x5a/0x70
> [<c04147bc>] smp_call_function_single+0x27/0x47
> [<c04f1610>] number+0x120/0x1e6
> [<c04f1ed1>] vsnprintf+0x40a/0x447
> [<c04ef103>] kref_get+0x17/0x1c
> [<c04ee6a0>] kobject_get+0xf/0x13
> [<c04ee72f>] kobject_add_internal+0x42/0x13b
> [<c04ee8dc>] kobject_init_and_add+0x23/0x25
> [<c0596b90>] cpuidle_add_state_sysfs+0x63/0xd7
> [<c05144d4>] acpi_os_execute_deferred+0x0/0x25
> [<c0596498>] cpuidle_enable_device+0x35/0xac
> [<c0531c28>] acpi_processor_cst_has_changed+0x40/0x54
> [<c052fac1>] acpi_processor_notify+0x83/0xde
> [<c0519549>] acpi_ev_notify_dispatch+0x4c/0x57
> [<c05144f1>] acpi_os_execute_deferred+0x1d/0x25
> [<c0435441>] run_workqueue+0x74/0xef
> [<c0435572>] worker_thread+0xb6/0xc2
> [<c0437f8a>] autoremove_wake_function+0x0/0x2d
> [<c04354bc>] worker_thread+0x0/0xc2
> [<c0437d35>] kthread+0x38/0x5d
> [<c0437cfd>] kthread+0x0/0x5d
> [<c0406d47>] kernel_thread_helper+0x7/0x10
> =======================
> ---[ end trace c2cdf21b5cc60ed6 ]---
>
> dmesg output:
>
> Initializing cgroup subsys cpuset
> Linux version 2.6.25-rc8 (root@draksha.cultuzz.in) (gcc version 4.3.0
> 20080222 (Red Hat 4.3.0-0.11) (GCC) ) #2 SMP Mon Apr 7 11:37:36 IST
> 2008
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000057e80000 (usable)
> BIOS-e820: 0000000057e80000 - 0000000057e96000 (ACPI data)
> BIOS-e820: 0000000057e96000 - 0000000057f00000 (ACPI NVS)
> BIOS-e820: 0000000057f00000 - 0000000058000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> 510MB HIGHMEM available.
> 896MB LOWMEM available.
> Scan SMP from c0000000 for 1024 bytes.
> Scan SMP from c009fc00 for 1024 bytes.
> Scan SMP from c00f0000 for 65536 bytes.
> found SMP MP-table at [c00f7130] 000f7130
> Entering add_active_range(0, 0, 360064) 0 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 229376
> HighMem 229376 -> 360064
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 360064
> On node 0 totalpages: 360064
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4064 pages, LIFO batch:0
> Normal zone: 1760 pages used for memmap
> Normal zone: 223520 pages, LIFO batch:31
> HighMem zone: 1021 pages used for memmap
> HighMem zone: 129667 pages, LIFO batch:31
> Movable zone: 0 pages used for memmap
> DMI present.
> Using APIC driver default
> ACPI: RSDP 000F7070, 0014 (r0 TOSQCI)
> ACPI: RSDT 57E8F4EF, 0038 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
> ACPI: FACP 57E95D7C, 0074 (r1 ATI Bonefish 6040000 ATI F4240)
> ACPI: DSDT 57E8FF4C, 5E30 (r1 TOSQCI L10 6040000 MSFT 2000002)
> ACPI: FACS 57E96FC0, 0040
> ACPI: APIC 57E95DF0, 005E (r1 PTLTD APIC 6040000 LTP 0)
> ACPI: MCFG 57E95E4E, 003C (r1 PTLTD MCFG 6040000 LTP 0)
> ACPI: SLIC 57E95E8A, 0176 (r1 TOSQCI TOSQCI00 6040000 LTP 0)
> ACPI: SSDT 57E8F527, 0535 (r1 PmRef CpuPm 3000 INTL 20050228)
> ACPI: DMI detected: Toshiba
> ATI board detected. Disabling timer routing over 8254.
> ACPI: PM-Timer IO Port: 0x8008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> Processor #0 6:14 APIC version 20
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> Processor #1 6:14 APIC version 20
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
> Enabling APIC mode: Flat. Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 60000000 (gap: 58000000:88000000)
> PM: Registered nosave memory: 000000000009d000 - 000000000009e000
> PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
> PM: Registered nosave memory: 00000000000a0000 - 00000000000ce000
> PM: Registered nosave memory: 00000000000ce000 - 00000000000d0000
> PM: Registered nosave memory: 00000000000d0000 - 00000000000dc000
> PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
> PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
> PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 357251
> Kernel command line: ro root=LABEL=/1 rhgb quiet acpi_os="!Linux"
> acpi_os_name="Windows 2006"
> mapped APIC to ffffb000 (fee00000)
> mapped IOAPIC to ffffa000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> CPU 0 irqstacks, hard=c07b0000 soft=c0790000
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Detected 1600.057 MHz processor.
> Console: colour VGA+ 80x25
> console [tty0] enabled
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 1419748k/1440256k available (2198k kernel code, 19260k
> reserved, 1127k data, 280k init, 522752k highmem)
> virtual kernel memory layout:
> fixmap : 0xffc52000 - 0xfffff000 (3764 kB)
> pkmap : 0xff400000 - 0xff800000 (4096 kB)
> vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> .init : 0xc0747000 - 0xc078d000 ( 280 kB)
> .data : 0xc0625b16 - 0xc073f7f0 (1127 kB)
> .text : 0xc0400000 - 0xc0625b16 (2198 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
> CPA: page pool initialized 1 of 1 pages preallocated
> SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
> Calibrating delay using timer specific routine.. 3203.40 BogoMIPS (lpj=1601701)
> Security Framework initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512
> Initializing cgroup subsys ns
> Initializing cgroup subsys cpuacct
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 0
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> using mwait in idle threads.
> Compat vDSO mapped to ffffe000.
> Checking 'hlt' instruction... OK.
> Early unpacking initramfs... done
> ACPI: Core revision 20070126
> ACPI: Overriding _OS definition to 'Windows 2006'
> ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
> CPU0: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c
> Booting processor 1/1 ip 4000
> CPU 1 irqstacks, hard=c07b1000 soft=c0791000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 3199.54 BogoMIPS (lpj=1599774)
> CPU: L1 I cache: 32K, L1 D cache: 32K
> CPU: L2 cache: 1024K
> CPU: Physical Processor ID: 0
> CPU: Processor Core ID: 1
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#1.
> CPU1: Intel Genuine Intel(R) CPU T2060 @ 1.60GHz stepping 0c
> Total of 2 processors activated (6402.95 BogoMIPS).
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> Brought up 2 CPUs
> CPU0 attaching sched-domain:
> domain 0: span 00000003
> groups: 00000001 00000002
> CPU1 attaching sched-domain:
> domain 0: span 00000003
> groups: 00000002 00000001
> net_namespace: 548 bytes
> Booting paravirtualized kernel on bare hardware
> NET: Registered protocol family 16
> No dock devices found.
> ACPI: bus type pci registered
> PCI: Using MMCONFIG for extended config space
> PCI: Using configuration type 1
> Setting up standard PCI resources
> ACPI: EC: Look up EC in DSDT
> ACPI Error (dswload-0664): [\___] Namespace lookup failure, AE_NOT_FOUND
> ACPI Exception (psloop-0225): AE_NOT_FOUND, During name lookup/catalog
> [20070126]
> ACPI Error (psparse-0537): Method parse/execution failed
> [\_SB_.PCI0._INI] (Node f781a6c0), AE_NOT_FOUND
> ACPI: Interpreter enabled
> ACPI: (supports S0 S3 S4 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
> ACPI: EC: driver started in poll mode
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Transparent bridge - 0000:00:14.4
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> 00:09: mem resource (0xc0004800-0xc00057ff) overlaps 0000:00:01.0 BAR
> 8 (0xc0000000-0xc00fffff), disabling
> pnp: PnP ACPI: found 10 devices
> ACPI: ACPI bus type pnp unregistered
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> usbcore: registered new device driver usb
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
> NetLabel: Initializing
> NetLabel: domain hash size = 128
> NetLabel: protocols = UNLABELED CIPSOv4
> NetLabel: unlabeled traffic allowed by default
> system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
> system 00:08: ioport range 0x1080-0x1080 has been reserved
> system 00:08: ioport range 0x200-0x20f has been reserved
> system 00:08: ioport range 0x40b-0x40b has been reserved
> system 00:08: ioport range 0x4d0-0x4d1 has been reserved
> system 00:08: ioport range 0x4d6-0x4d6 has been reserved
> system 00:08: ioport range 0x530-0x537 has been reserved
> system 00:08: ioport range 0xc00-0xc01 has been reserved
> system 00:08: ioport range 0xc14-0xc14 has been reserved
> system 00:08: ioport range 0xc50-0xc52 has been reserved
> system 00:08: ioport range 0xc6c-0xc6c has been reserved
> system 00:08: ioport range 0xc6f-0xc6f has been reserved
> system 00:08: ioport range 0xcd4-0xcd5 has been reserved
> system 00:08: ioport range 0xcd6-0xcd7 has been reserved
> system 00:08: ioport range 0xcd8-0xcdf has been reserved
> system 00:08: ioport range 0x8000-0x805f could not be reserved
> system 00:08: ioport range 0x8210-0x821f has been reserved
> system 00:08: ioport range 0xf40-0xf47 has been reserved
> system 00:08: ioport range 0x280-0x293 has been reserved
> system 00:08: ioport range 0x87f-0x87f has been reserved
> system 00:09: iomem range 0xe0000-0xfffff could not be reserved
> system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
> system 00:09: iomem range 0x0-0xfff could not be reserved
> PCI: Bridge: 0000:00:01.0
> IO window: 9000-9fff
> MEM window: 0xc0000000-0xc00fffff
> PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
> PCI: Bus 10, cardbus bridge: 0000:09:01.0
> IO window: 0x0000a400-0x0000a4ff
> IO window: 0x0000a800-0x0000a8ff
> PREFETCH window: 0x60000000-0x63ffffff
> MEM window: 0x64000000-0x67ffffff
> PCI: Bridge: 0000:00:14.4
> IO window: a000-afff
> MEM window: 0xc0100000-0xc01fffff
> PREFETCH window: 0x0000000060000000-0x0000000063ffffff
> PCI: Enabling device 0000:09:01.0 (0000 -> 0003)
> ACPI: PCI Interrupt 0000:09:01.0[A] -> GSI 20 (level, low) -> IRQ 20
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> checking if image is initramfs... it is
> Freeing initrd memory: 2618k freed
> apm: BIOS not found.
> audit: initializing netlink socket (disabled)
> type=2000 audit(1207624959.772:1): initialized
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci 0000:01:05.0: Boot video device
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> ACPI: SSDT 57E8FCDD, 01E8 (r1 PmRef Cpu0Ist 3000 INTL 20050228)
> ACPI: SSDT 57E8FA5C, 01FC (r1 PmRef Cpu0Cst 3001 INTL 20050228)
> ACPI: ACPI0007:00 is registered as cooling_device0
> ACPI: Processor [CPU0] (supports 8 throttling states)
> ACPI: SSDT 57E8FEC5, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20050228)
> ACPI: SSDT 57E8FC58, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)
> ACPI: ACPI0007:01 is registered as cooling_device1
> ACPI: Processor [CPU1] (supports 8 throttling states)
> ACPI: LNXTHERM:01 is registered as thermal_zone0
> ACPI: EC: non-query interrupt received, switching to interrupt mode
> ACPI: Thermal Zone [THRM] (41 C)
> isapnp: Scanning for PnP cards...
> Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 0
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12ac
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.103
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> brd: module loaded
> input: Macintosh mouse button emulation as /devices/virtual/input/input0
> Yenta: CardBus bridge found at 0000:09:01.0 [1179:ff31]
> Yenta: Using CSCINT to route CSC interrupts to PCI
> Yenta: Routing CardBus interrupts to PCI
> Yenta TI: socket 0000:09:01.0, mfunc 0x00001002, devctl 0x44
> Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
> Socket status: 30000006
> pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
> cs: IO port probe 0xa000-0xafff: clean.
> pcmcia: parent PCI bridge Memory window: 0xc0100000 - 0xc01fffff
> pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
> PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard as
> /devices/platform/i8042/serio0/input/input1
> cpuidle: using governor ladder
> cpuidle: using governor menu
> usbcore: registered new interface driver hiddev
> usbcore: registered new interface driver usbhid
> drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
> TCP cubic registered
> Initializing XFRM netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Using IPI No-Shortcut mode
> registered taskstats version 1
> Freeing unused kernel memory: 280k freed
> Write protecting the kernel read-only data: 916k
> ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
> ehci_hcd 0000:00:13.2: EHCI Host Controller
> ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0406000
> ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: EHCI Host Controller
> usb usb1: Manufacturer: Linux 2.6.25-rc8 ehci_hcd
> usb usb1: SerialNumber: 0000:00:13.2
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
> ohci_hcd 0000:00:13.0: OHCI Host Controller
> ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
> ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0404000
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 4 ports detected
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: OHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.25-rc8 ohci_hcd
> usb usb2: SerialNumber: 0000:00:13.0
> ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
> ohci_hcd 0000:00:13.1: OHCI Host Controller
> ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0405000
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 4 ports detected
> Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
> synaptics: Toshiba Satellite L35 detected, limiting rate to 40pps.
> input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: OHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.25-rc8 ohci_hcd
> usb usb3: SerialNumber: 0000:00:13.1
> USB Universal Host Controller Interface driver v3.0
> SCSI subsystem initialized
> Driver 'sd' needs updating - please use bus_type methods
> libata version 3.00 loaded.
> sata_sil 0000:00:12.0: version 2.3
> PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
> scsi0 : sata_sil
> scsi1 : sata_sil
> ata1: SATA max UDMA/100 mmio m512@0xc0407000 tf 0xc0407080 irq 22
> ata2: SATA max UDMA/100 mmio m512@0xc0407000 tf 0xc04070c0 irq 22
> ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> ata1.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100
> ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
> ata1.00: configured for UDMA/100
> ata2: SATA link down (SStatus 0 SControl 300)
> scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
> sd 0:0:0:0: [sda] Write Protect is off
> sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
> support DPO or FUA
> sda: sda1 sda2 sda3 sda4
> sd 0:0:0:0: [sda] Attached SCSI disk
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:14.1 to 64
> ACPI: PCI interrupt for device 0000:00:14.1 disabled
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> scsi2 : pata_atiixp
> scsi3 : pata_atiixp
> ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
> ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
> ata3: port disabled. ignoring.
> ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.10, max UDMA/33
> ata4.00: configured for UDMA/33
> scsi 3:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.10 PQ: 0 ANSI: 5
> EXT3-fs: INFO: recovery required on readonly filesystem.
> EXT3-fs: write access will be enabled during recovery.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: recovery complete.
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: Disabled at runtime.
> SELinux: Unregistering netfilter hooks
> type=1404 audit(1207624975.849:2): selinux=0 auid=4294967295 ses=4294967295
> input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> ACPI: Power Button (FF) [PWRF]
> input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
> ACPI: Lid Switch [LID]
> input: Power Button (CM) as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
> ACPI: Power Button (CM) [PWRB]
> sd 0:0:0:0: Attached scsi generic sg0 type 0
> scsi 3:0:0:0: Attached scsi generic sg1 type 5
> ACPI: AC Adapter [ACAD] (on-line)
> input: PC Speaker as /devices/platform/pcspkr/input/input6
> cs: IO port probe 0x100-0x3af: clean.
> cs: IO port probe 0x3e0-0x4ff: clean.
> cs: IO port probe 0x820-0x8ff: clean.
> cs: IO port probe 0xc00-0xcf7: clean.
> cs: IO port probe 0xa00-0xaff: clean.
> piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
> 8139too Fast Ethernet driver 0.9.28
> ACPI: PCI Interrupt 0000:09:02.0[A] -> GSI 21 (level, low) -> IRQ 21
> eth0: RealTek RTL8139 at 0xf8914000, 00:1b:24:1e:9a:57, IRQ 21
> eth0: Identified 8139 chip type 'RTL-8100B/8139D'
> ACPI: Battery Slot [BAT1] (battery present)
> 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
> Driver 'sr' needs updating - please use bus_type methods
> sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
> Uniform CD-ROM driver Revision: 3.20
> sr 3:0:0:0: Attached scsi CD-ROM sr0
> ACPI: device:1d is registered as cooling_device2
> input: Video Bus as
> /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:1a/device:1b/input/input7
> ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
> ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
> ALSA sound/pci/hda/hda_intel.c:1813: chipset global capabilities = 0x4401
> ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0xb
> ALSA sound/pci/hda/hda_codec.c:2214: hda_codec: model '3stack' is selected
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Surround
> Playback Volume, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Center Playback
> Volume, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave LFE Playback
> Volume, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Side Playback
> Volume, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Headphone
> Playback Volume, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Speaker
> Playback Volume, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Mono Playback
> Volume, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Line-Out
> Playback Volume, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Surround
> Playback Switch, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Center Playback
> Switch, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave LFE Playback
> Switch, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Side Playback
> Switch, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Speaker
> Playback Switch, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave Mono Playback
> Switch, skipped
> ALSA sound/pci/hda/hda_codec.c:1076: Cannot find slave IEC958 Playback
> Switch, skipped
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
> device-mapper: multipath: version 1.0.5 loaded
> loop: module loaded
> EXT3 FS on sda4, internal journal
> fuse init (API version 7.9)
> Adding 3116600k swap on /dev/sda3. Priority:-1 extents:1 across:3116600k
> IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
> ip_tables: (C) 2000-2006 Netfilter Core Team
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> openser[1791]: segfault at 9 ip 0045a625 sp bf89948c error 4 in
> libc-2.7.90.so[3e2000+169000]
> Bridge firewalling registered
> virbr0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
> virbr0: starting userspace STP failed, starting kernel STP
> kjournald starting. Commit interval 5 seconds
> EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
> EXT3 FS on dm-0, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> warning: `pulseaudio' uses 32-bit capabilities (legacy support in use)
> ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400,
> fragsize=0x1100, format=0x4011
> ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x5,
> stream=0x5, channel=0, format=0x4011
> hda-intel: Invalid position buffer, using LPIB read method instead.
> ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400,
> fragsize=0x1100, format=0x4011
> ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x9,
> stream=0x1, channel=0, format=0x4011
> ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400,
> fragsize=0x1100, format=0x4011
> ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x9,
> stream=0x1, channel=0, format=0x4011
> ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x9,
> stream=0x0, channel=0, format=0x0
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x3,
> stream=0x0, channel=0, format=0x0
> ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x4,
> stream=0x0, channel=0, format=0x0
> ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x5,
> stream=0x0, channel=0, format=0x0
> IPv6 over IPv4 tunneling driver
> sit0: Disabled Privacy Extensions
> eth0: link down
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> ath_hal: module license 'Proprietary' taints kernel.
> ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112,
> RF2413, RF5413, RF2133)
> wlan: svn r3349
> ath_pci: svn r3349
> ACPI: PCI Interrupt 0000:09:04.0[A] -> GSI 22 (level, low) -> IRQ 22
> MadWifi: ath_attach: Switching rfkill capability off
> ath_rate_sample: 1.2 (svn r3349)
> MadWifi: ath_attach: Switching per-packet transmit power control off
> wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps
> 24Mbps 36Mbps 48Mbps 54Mbps
> wifi0: H/W encryption support: WEP AES AES_CCM TKIP
> wifi0: ath_announce: Use hw queue 1 for WME_AC_BE traffic
> wifi0: ath_announce: Use hw queue 0 for WME_AC_BK traffic
> wifi0: ath_announce: Use hw queue 2 for WME_AC_VI traffic
> wifi0: ath_announce: Use hw queue 3 for WME_AC_VO traffic
> wifi0: ath_announce: Use hw queue 8 for CAB traffic
> wifi0: ath_announce: Use hw queue 9 for beacons
> ath_pci: wifi0: Atheros 5212: mem=0xc0110000, irq=22
> udev: renamed network interface ath0 to wlan0
> wlan0: no IPv6 routers present
> ALSA sound/pci/hda/hda_intel.c:1293: azx_pcm_prepare: bufsize=0x4400,
> fragsize=0x1100, format=0x4011
> ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x4,
> stream=0x0, channel=0, format=0x0
> ALSA sound/pci/hda/hda_codec.c:686: hda_codec_setup_stream: NID=0x5,
> stream=0x0, channel=0, format=0x0
> ------------[ cut here ]------------
> WARNING: at lib/kref.c:43 kref_get+0x17/0x1c()
> Modules linked in: wlan_scan_sta ath_rate_sample ath_pci wlan
> ath_hal(P) sit tunnel4 ipv6 cbc aes_i586 aes_generic dm_crypt
> ipt_MASQUERADE iptable_nat nf_nat bridge autofs4 nf_conntrack_ipv4
> xt_state nf_conntrack xt_tcpudp ipt_REJECT iptable_filter ip_tables
> x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_mirror
> dm_multipath dm_mod snd_hda_intel snd_seq_dummy snd_seq_oss
> snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss
> snd_pcm snd_timer sr_mod video 8139cp snd_page_alloc 8139too snd_hwdep
> i2c_piix4 i2c_core pcspkr output snd battery soundcore ac mii joydev
> sg cdrom button pata_atiixp pata_acpi sata_sil ata_generic libata
> sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last
> unloaded: microcode]
> Pid: 70, comm: kacpi_notify Tainted: P 2.6.25-rc8 #2
> [<c0427dcc>] warn_on_slowpath+0x40/0x65
> [<c043007b>] switch_uid+0x5a/0x70
> [<c04147bc>] smp_call_function_single+0x27/0x47
> [<c04f1610>] number+0x120/0x1e6
> [<c04f1ed1>] vsnprintf+0x40a/0x447
> [<c04ef103>] kref_get+0x17/0x1c
> [<c04ee6a0>] kobject_get+0xf/0x13
> [<c04ee72f>] kobject_add_internal+0x42/0x13b
> [<c04ee8dc>] kobject_init_and_add+0x23/0x25
> [<c0596b90>] cpuidle_add_state_sysfs+0x63/0xd7
> [<c05144d4>] acpi_os_execute_deferred+0x0/0x25
> [<c0596498>] cpuidle_enable_device+0x35/0xac
> [<c0531c28>] acpi_processor_cst_has_changed+0x40/0x54
> [<c052fac1>] acpi_processor_notify+0x83/0xde
> [<c0519549>] acpi_ev_notify_dispatch+0x4c/0x57
> [<c05144f1>] acpi_os_execute_deferred+0x1d/0x25
> [<c0435441>] run_workqueue+0x74/0xef
> [<c0435572>] worker_thread+0xb6/0xc2
> [<c0437f8a>] autoremove_wake_function+0x0/0x2d
> [<c04354bc>] worker_thread+0x0/0xc2
> [<c0437d35>] kthread+0x38/0x5d
> [<c0437cfd>] kthread+0x0/0x5d
> [<c0406d47>] kernel_thread_helper+0x7/0x10
> =======================
> ---[ end trace c2cdf21b5cc60ed6 ]---
> BUG: unable to handle kernel NULL pointer dereference at 00000020
> IP: [<c04b56d0>] sysfs_addrm_start+0x1e/0x7a
> *pde = 5784d067
> Oops: 0000 [#1] SMP
> Modules linked in: wlan_scan_sta ath_rate_sample ath_pci wlan
> ath_hal(P) sit tunnel4 ipv6 cbc aes_i586 aes_generic dm_crypt
> ipt_MASQUERADE iptable_nat nf_nat bridge autofs4 nf_conntrack_ipv4
> xt_state nf_conntrack xt_tcpudp ipt_REJECT iptable_filter ip_tables
> x_tables cpufreq_ondemand acpi_cpufreq fuse loop dm_mirror
> dm_multipath dm_mod snd_hda_intel snd_seq_dummy snd_seq_oss
> snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss
> snd_pcm snd_timer sr_mod video 8139cp snd_page_alloc 8139too snd_hwdep
> i2c_piix4 i2c_core pcspkr output snd battery soundcore ac mii joydev
> sg cdrom button pata_atiixp pata_acpi sata_sil ata_generic libata
> sd_mod scsi_mod ext3 jbd mbcache uhci_hcd ohci_hcd ehci_hcd [last
> unloaded: microcode]
>
> Pid: 70, comm: kacpi_notify Tainted: P (2.6.25-rc8 #2)
> EIP: 0060:[<c04b56d0>] EFLAGS: 00010246 CPU: 1
> EIP is at sysfs_addrm_start+0x1e/0x7a
> EAX: 41ed0000 EBX: 00000000 ECX: 00000000 EDX: 00000246
> ESI: f7873ee0 EDI: f7873ef0 EBP: 00000000 ESP: f7873ed0
> DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> Process kacpi_notify (pid: 70, ti=f7873000 task=f78874d0 task.ti=f7873000)
> Stack: f2d86c94 f71484b0 fffffff4 c04b5af4 00000000 00000000 00000000 00000000
> f2d86c94 fffffffe f2d86c94 f7a9001c c04b5b56 f7873f08 c04ee6a0 f2d86c94
> c04ee78f f7a90318 f2d86c80 00000000 f2d86c94 f7a9001c c04ee8dc f7873f44
> Call Trace:
> [<c04b5af4>] create_dir+0x33/0x6c
> [<c04b5b56>] sysfs_create_dir+0x29/0x3b
> [<c04ee6a0>] kobject_get+0xf/0x13
> [<c04ee78f>] kobject_add_internal+0xa2/0x13b
> [<c04ee8dc>] kobject_init_and_add+0x23/0x25
> [<c0596b90>] cpuidle_add_state_sysfs+0x63/0xd7
> [<c05144d4>] acpi_os_execute_deferred+0x0/0x25
> [<c0596498>] cpuidle_enable_device+0x35/0xac
> [<c0531c28>] acpi_processor_cst_has_changed+0x40/0x54
> [<c052fac1>] acpi_processor_notify+0x83/0xde
> [<c0519549>] acpi_ev_notify_dispatch+0x4c/0x57
> [<c05144f1>] acpi_os_execute_deferred+0x1d/0x25
> [<c0435441>] run_workqueue+0x74/0xef
> [<c0435572>] worker_thread+0xb6/0xc2
> [<c0437f8a>] autoremove_wake_function+0x0/0x2d
> [<c04354bc>] worker_thread+0x0/0xc2
> [<c0437d35>] kthread+0x38/0x5d
> [<c0437cfd>] kthread+0x0/0x5d
> [<c0406d47>] kernel_thread_helper+0x7/0x10
> =======================
> Code: 75 ee 89 56 0c 31 c0 89 31 5b 5e 5f c3 57 b9 04 00 00 00 56 89
> c7 53 89 c6 89 d3 31 c0 f3 ab b8 34 83 71 c0 89 16 e8 57 bd 16 00 <8b>
> 53 20 b9 8c 53 4b c0 a1 88 54 83 c0 53 e8 a6 7f fd ff 5b 85
> EIP: [<c04b56d0>] sysfs_addrm_start+0x1e/0x7a SS:ESP 0068:f7873ed0
> ---[ end trace c2cdf21b5cc60ed6 ]---
>
>
> >
> > Thanks,
> >
> > Thomas
> >
> >
> >
> > >
> > > >
> > > > Thomas
> > > >
> > > >
> > > >
> > > > > Kind Regards,
> > > > > Sanjeev
> > > > >
> > > > > On Wed, Apr 2, 2008 at 12:44 PM, Andrew Morton
> > > > > <akpm@linux-foundation.org> wrote:
> > > > > >
> > > > > > On Sun, 30 Mar 2008 19:21:39 +0530 "Sanjeev Aditya Naga" <sanjeev.kernel@gmail.com> wrote:
> > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > This happens everytime there is a power disconnection
> > > > > > > (switching to battery). Complete dmesg attached. This
> > > > > > > in particular is of kernel 2.6.24.3.
> > > > > > >
> > > > > > > Greetings,
> > > > > > > Kind Regards,
> > > > > > > Sanjeev
> > > > > > >
> > > > > > > BUG: unable to handle kernel NULL pointer dereference at virtual
> > > > > > > address 00000020
> > > > > > > printing eip: c04c4716 *pde = 578c2067
> > > > > > > Oops: 0000 [#1] SMP
> > > > > > > Modules linked in: cbc(U) geode_aes(U) blkcipher(U) aes_i586(U)
> > > > > > > aes_generic(U) dm_crypt(U) ipt_MASQUERADE(U) iptable_nat(U) nf_nat(U)
> > > > > > > bridge(U) autofs4(U) nf_conntrack_ipv4(U) xt_state(U) nf_conntrack(U)
> > > > > > > xt_tcpudp(U) ipt_REJECT(U) iptable_filter(U) ip_tables(U) x_tables(U)
> > > > > > > cpufreq_ondemand(U) acpi_cpufreq(U) fuse(U) loop(U) dm_mirror(U)
> > > > > > > dm_multipath(U) dm_mod(U) ipv6(U) snd_hda_intel(U) snd_seq_dummy(U)
> > > > > > > snd_seq_oss(U) snd_seq_midi_event(U) snd_seq(U) snd_seq_device(U)
> > > > > > > snd_pcm_oss(U) sr_mod(U) snd_mixer_oss(U) snd_pcm(U) 8139cp(U)
> > > > > > > snd_timer(U) button(U) 8139too(U) mii(U) snd_page_alloc(U) cdrom(U)
> > > > > > > video(U) output(U) snd_hwdep(U) ac(U) snd(U) pcspkr(U) i2c_piix4(U)
> > > > > > > i2c_core(U) battery(U) joydev(U) soundcore(U) sg(U) pata_atiixp(U)
> > > > > > > pata_acpi(U) sata_sil(U) ata_generic(U) libata(U) sd_mod(U)
> > > > > > > scsi_mod(U) ext3(U) jbd(U) mbcache(U) uhci_hcd(U) ohci_hcd(U)
> > > > > > > ehci_hcd(U)
> > > > > > >
> > > > > > > Pid: 69, comm: kacpi_notify Not tainted (2.6.24.3 #5)
> > > > > > > EIP: 0060:[<c04c4716>] EFLAGS: 00010246 CPU: 0
> > > > > > > EIP is at sysfs_addrm_start+0x21/0x81
> > > > > > > EAX: c04c47d7 EBX: 00000000 ECX: 00000000 EDX: f78b8000
> > > > > > > ESI: f78b8eb8 EDI: f78b8ec8 EBP: 00000000 ESP: f78b8ea4
> > > > > > > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
> > > > > > > Process kacpi_notify (pid: 69, ti=f78b8000 task=f78d8000 task.ti=f78b8000)
> > > > > > > Stack: f229ff54 f229ff54 f5b8d390 fffffff4 c04c4b45 00000000 00000000 00000000
> > > > > > > 00000000 f229ff54 00000000 00000000 f782601c c04c4bab f78b8ee0 c04fe65d
> > > > > > > f229ff54 c04fe8a8 f722e67f ffffffff ffffffff 00000007 f722e678 f78261d8
> > > > > > > Call Trace:
> > > > > > > [<c04c4b45>] create_dir+0x33/0x6c
> > > > > > > [<c04c4bab>] sysfs_create_dir+0x2d/0x40
> > > > > > > [<c04fe65d>] kobject_get+0xf/0x13
> > > > > > > [<c04fe8a8>] kobject_add+0xdd/0x176
> > > > > > > [<c04fe9eb>] kobject_register+0x19/0x2d
> > > > > > > [<c05b0ad0>] cpuidle_add_state_sysfs+0x7b/0xe4
> > > > > > > [<c052660e>] acpi_os_execute_notify+0x0/0x2b
> > > > > > > [<c05b03fd>] cpuidle_enable_device+0x31/0x9b
> > > > > > > [<c0545923>] acpi_processor_cst_has_changed+0x40/0x55
> > > > > > > [<c0543ae2>] acpi_processor_notify+0x8b/0xf4
> > > > > > > [<c052bcbb>] acpi_ev_notify_dispatch+0x4c/0x55
> > > > > > > [<c0526630>] acpi_os_execute_notify+0x22/0x2b
> > > > > > > [<c052660e>] acpi_os_execute_notify+0x0/0x2b
> > > > > > > [<c043c212>] run_workqueue+0x7d/0x107
> > > > > > > [<c043fa5b>] prepare_to_wait+0x28/0x45
> > > > > > > [<c043c35a>] worker_thread+0xbe/0xca
> > > > > > > [<c043f8ff>] autoremove_wake_function+0x0/0x35
> > > > > > > [<c043c29c>] worker_thread+0x0/0xca
> > > > > > > [<c043f679>] kthread+0x38/0x5d
> > > > > > > [<c043f641>] kthread+0x0/0x5d
> > > > > > > [<c0406477>] kernel_thread_helper+0x7/0x10
> > > > > > > =======================
> > > > > > > Code: c0 89 31 83 c4 14 5b 5e 5f c3 57 b9 04 00 00 00 56 89 c7 53 89
> > > > > > > c6 83 ec 04 89 d3 31 c0 f3 ab b8 903f 72 c0 89 16 e8 6a cf 16 00 <8b>
> > > > > > > 53 20 b9 ec 42 4c c0 a1 84 e4 83 c0 89 1c 24 e8 44 6e fd ff
> > > > > > > EIP: [<c04c4716>] sysfs_addrm_start+0x21/0x81 SS:ESP 0068:f78b8ea4
> > > > > >
> > > > > > Looks like a cpuidle problem (or at least acpi).
> > > > > >
> > > > > > I seem to recall having seen other reports of this?
> > > > Then it might be something else...
> > > >
> > > > Thomas
> > > >
> > > >
> >
> >
^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: [>=2.6.23][BUG] Oops on power disconnection
2008-04-03 21:04 ` Thomas Renninger
@ 2008-04-04 0:31 ` Pallipadi, Venkatesh
2008-04-05 18:05 ` Sanjeev Aditya Naga
2008-04-05 13:15 ` Sanjeev Aditya Naga
1 sibling, 1 reply; 13+ messages in thread
From: Pallipadi, Venkatesh @ 2008-04-04 0:31 UTC (permalink / raw)
To: trenn, Sanjeev Aditya Naga
Cc: Andrew Morton, linux-kernel, linux-acpi, Li, Shaohua
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 4219 bytes --]
>-----Original Message-----
>From: Thomas Renninger [mailto:trenn@suse.de]
>Sent: Thursday, April 03, 2008 2:05 PM
>To: Sanjeev Aditya Naga
>Cc: Andrew Morton; linux-kernel@vger.kernel.org;
>linux-acpi@vger.kernel.org; Pallipadi, Venkatesh; Li, Shaohua
>Subject: Re: [>=2.6.23][BUG] Oops on power disconnection
>
>
>On Thu, 2008-04-03 at 21:45 +0530, Sanjeev Aditya Naga wrote:
>> Hello Thomas,
>>
>> On Wed, Apr 2, 2008 at 11:42 PM, Thomas Renninger
><trenn@suse.de> wrote:
>> >
>> > On Wed, 2008-04-02 at 21:43 +0530, Sanjeev Aditya Naga wrote:
>> > > Hello Thomas,
>> > >
>> > > > Hi,
>> > > >
>> > > >
>> > > > On Wed, 2008-04-02 at 18:38 +0530, Sanjeev Aditya Naga wrote:
>> > > > > Hello Andrew Morton,
>> > > > >
>> > > > > Greetings!
>> > > > >
>> > > > > Thank you for the update. Is there anything I can do
>> > > > > from my side?
>> > > > >
>> > > > > I thought it was a acpi (dsdt) problem. And based on
>> > > > > a tutorial, I have tried to extract, fix,
>recompile the dsdt
>> > > > > and use it with the kernel. But still I have the
>same problem.
>> > > > > Let me know if I shall attach the dsdt (original)
>decompiled
>> > > > > code, if that helps.
>> > > >
>> > > > this could be due a general memory corruption
>problem through ACPICA.
>> > > > If you get different backtraces on reboots even you
>only modified things
>> > > > that do not have to do with the problem, it's
>probably that and related
>> > > > to:
>> > > > http://bugzilla.kernel.org/show_bug.cgi?id=10339
>> > > >
>> > > > You might want to try the latest kernel or the patch
>posted there.
>> > >
>> > > Thank you for the update.
>> > > I have checked the bug and unfortunately its not the
>> > > same issue. Things work absolutely fine, when I'm
>> > > running on AC power. It even displays the exact
>> > > battery (and charging) status to me. It messes up
>> > > when suddenly AC power gets disconnected and
>> > > switches to battery mode (The time when I get Oops).
>> > > The system is still usable after switching to battery
>> > > mode and I still get correct battery stats until its
>> > > completely discharged. However most of the commands
>> > > like kill, poweroff, java doesn't work after the Oops.
>> > The bug is not related to battery, but to AML parsing and
>can therefore
>> > affect anything which is ACPI related.
>> >
>> >
>> > > BTW there is one similarity with the referenced bug.
>> > > If I boot the computer without AC Power, it gives the
>> > > same Oops and stops during booting itself.
>> > >
>> > > I shall try the latest kernel once and shall update you.
>> > That would be great.
>> > If it works, please give the patch there a try, IMO this
>one should see
>> > 2.6.2[34].X stable kernels soon.
>>
>> I have got the lastest kernel 2.6.25-rc8 today. I observed that
>> the referenced patch is already in the kernel. However this didn't
>> solve the problem in question. I get the same Oops on this kernel
>> as well. Find the latest dmesg along with the Oops:
>Ok.
>Maybe best is you document the backtraces/oopses with kernel
>versions at
>bugzilla.kernel.org and add dmesg and acpidump.
>It seems your machine notifies OS that the C-state table changed.
>AFAIK this is rare and there might be a general bug in the
>cpuidle layer
>which I do not know well.
>Best you add Venkatesh and Shaohua Li <shaohua.li@intel.com> to CC of
>the bug.
>While the backtrace shows a lot, cpuidle IMO is missing a general debug
>option like in the cpufreq layer.
>I couldn't find a single printk in the whole cpuidle/{cpuidle,sysfs}.c
>files, even on error paths. Also in the cpuidle specific parts of
>drivers/acpi/processor_idle.c some debug printks may help for
>future bug
>reports. It is very hard to guess what happened...
>
This looks like cpuidle and kobject interaction.
The latest oops looks different from the original one. Latest one is a
warn_on in lib/kref.c:43
We (Me or Shaohua) will take a deeper look at get back on this.
Thanks,
Venki
ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-04-03 21:04 ` Thomas Renninger
2008-04-04 0:31 ` Pallipadi, Venkatesh
@ 2008-04-05 13:15 ` Sanjeev Aditya Naga
2008-05-03 9:55 ` Sanjeev Aditya Naga
1 sibling, 1 reply; 13+ messages in thread
From: Sanjeev Aditya Naga @ 2008-04-05 13:15 UTC (permalink / raw)
To: trenn
Cc: Andrew Morton, linux-kernel, linux-acpi, Venkatesh Pallipadi, Li,
Shaohua
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 3950 bytes --]
Hello Thomas,
On Fri, Apr 4, 2008 at 2:34 AM, Thomas Renninger <trenn@suse.de> wrote:>>> On Thu, 2008-04-03 at 21:45 +0530, Sanjeev Aditya Naga wrote:> > Hello Thomas,> >> > On Wed, Apr 2, 2008 at 11:42 PM, Thomas Renninger <trenn@suse.de> wrote:> > >> > > On Wed, 2008-04-02 at 21:43 +0530, Sanjeev Aditya Naga wrote:> > > > Hello Thomas,> > > >> > > > > Hi,> > > > >> > > > >> > > > > On Wed, 2008-04-02 at 18:38 +0530, Sanjeev Aditya Naga wrote:> > > > > > Hello Andrew Morton,> > > > > >> > > > > > Greetings!> > > > > >> > > > > > Thank you for the update. Is there anything I can do> > > > > > from my side?> > > > > >> > > > > > I thought it was a acpi (dsdt) problem. And based on> > > > > > a tutorial, I have tried to extract, fix, recompile the dsdt> > > > > > and use it with the kernel. But still I have the same problem.> > > > > > Let me know if I shall attach the dsdt (original) decompiled> > > > > > code, if that helps.> > > > >> > > > > this could be due a general memory corruption problem through ACPICA.> > > > > If you get different backtraces on reboots even you only modified things> > > > > that do not have to do with the problem, it's probably that and related> > > > > to:> > > > > http://bugzilla.kernel.org/show_bug.cgi?id=10339> > > > >> > > > > You might want to try the latest kernel or the patch posted there.> > > >> > > > Thank you for the update.> > > > I have checked the bug and unfortunately its not the> > > > same issue. Things work absolutely fine, when I'm> > > > running on AC power. It even displays the exact> > > > battery (and charging) status to me. It messes up> > > > when suddenly AC power gets disconnected and> > > > switches to battery mode (The time when I get Oops).> > > > The system is still usable after switching to battery> > > > mode and I still get correct battery stats until its> > > > completely discharged. However most of the commands> > > > like kill, poweroff, java doesn't work after the Oops.> > > The bug is not related to battery, but to AML parsing and can therefore> > > affect anything which is ACPI related.> > >> > >> > > > BTW there is one similarity with the referenced bug.> > > > If I boot the computer without AC Power, it gives the> > > > same Oops and stops during booting itself.> > > >> > > > I shall try the latest kernel once and shall update you.> > > That would be great.> > > If it works, please give the patch there a try, IMO this one should see> > > 2.6.2[34].X stable kernels soon.> >> > I have got the lastest kernel 2.6.25-rc8 today. I observed that> > the referenced patch is already in the kernel. However this didn't> > solve the problem in question. I get the same Oops on this kernel> > as well. Find the latest dmesg along with the Oops:> Ok.> Maybe best is you document the backtraces/oopses with kernel versions at> bugzilla.kernel.org and add dmesg and acpidump.> It seems your machine notifies OS that the C-state table changed.> AFAIK this is rare and there might be a general bug in the cpuidle layer> which I do not know well.> Best you add Venkatesh and Shaohua Li <shaohua.li@intel.com> to CC of> the bug.> While the backtrace shows a lot, cpuidle IMO is missing a general debug> option like in the cpufreq layer.> I couldn't find a single printk in the whole cpuidle/{cpuidle,sysfs}.c> files, even on error paths. Also in the cpuidle specific parts of> drivers/acpi/processor_idle.c some debug printks may help for future bug> reports. It is very hard to guess what happened...
Thank you for the update:
I have just registered a bug athttp://bugzilla.kernel.org/show_bug.cgi?id=10394as directed by you.
Kind Regards,Sanjeevÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-04-04 0:31 ` Pallipadi, Venkatesh
@ 2008-04-05 18:05 ` Sanjeev Aditya Naga
0 siblings, 0 replies; 13+ messages in thread
From: Sanjeev Aditya Naga @ 2008-04-05 18:05 UTC (permalink / raw)
To: Pallipadi, Venkatesh
Cc: trenn, Andrew Morton, linux-kernel, linux-acpi, Li, Shaohua
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 4600 bytes --]
Hello Venki,
On Fri, Apr 4, 2008 at 6:01 AM, Pallipadi, Venkatesh<venkatesh.pallipadi@intel.com> wrote:>>>> >-----Original Message-----> >From: Thomas Renninger [mailto:trenn@suse.de]> >Sent: Thursday, April 03, 2008 2:05 PM> >To: Sanjeev Aditya Naga> >Cc: Andrew Morton; linux-kernel@vger.kernel.org;> >linux-acpi@vger.kernel.org; Pallipadi, Venkatesh; Li, Shaohua> >Subject: Re: [>=2.6.23][BUG] Oops on power disconnection> >> >> >On Thu, 2008-04-03 at 21:45 +0530, Sanjeev Aditya Naga wrote:> >> Hello Thomas,> >>> >> On Wed, Apr 2, 2008 at 11:42 PM, Thomas Renninger> ><trenn@suse.de> wrote:> >> >> >> > On Wed, 2008-04-02 at 21:43 +0530, Sanjeev Aditya Naga wrote:> >> > > Hello Thomas,> >> > >> >> > > > Hi,> >> > > >> >> > > >> >> > > > On Wed, 2008-04-02 at 18:38 +0530, Sanjeev Aditya Naga wrote:> >> > > > > Hello Andrew Morton,> >> > > > >> >> > > > > Greetings!> >> > > > >> >> > > > > Thank you for the update. Is there anything I can do> >> > > > > from my side?> >> > > > >> >> > > > > I thought it was a acpi (dsdt) problem. And based on> >> > > > > a tutorial, I have tried to extract, fix,> >recompile the dsdt> >> > > > > and use it with the kernel. But still I have the> >same problem.> >> > > > > Let me know if I shall attach the dsdt (original)> >decompiled> >> > > > > code, if that helps.> >> > > >> >> > > > this could be due a general memory corruption> >problem through ACPICA.> >> > > > If you get different backtraces on reboots even you> >only modified things> >> > > > that do not have to do with the problem, it's> >probably that and related> >> > > > to:> >> > > > http://bugzilla.kernel.org/show_bug.cgi?id=10339> >> > > >> >> > > > You might want to try the latest kernel or the patch> >posted there.> >> > >> >> > > Thank you for the update.> >> > > I have checked the bug and unfortunately its not the> >> > > same issue. Things work absolutely fine, when I'm> >> > > running on AC power. It even displays the exact> >> > > battery (and charging) status to me. It messes up> >> > > when suddenly AC power gets disconnected and> >> > > switches to battery mode (The time when I get Oops).> >> > > The system is still usable after switching to battery> >> > > mode and I still get correct battery stats until its> >> > > completely discharged. However most of the commands> >> > > like kill, poweroff, java doesn't work after the Oops.> >> > The bug is not related to battery, but to AML parsing and> >can therefore> >> > affect anything which is ACPI related.> >> >> >> >> >> > > BTW there is one similarity with the referenced bug.> >> > > If I boot the computer without AC Power, it gives the> >> > > same Oops and stops during booting itself.> >> > >> >> > > I shall try the latest kernel once and shall update you.> >> > That would be great.> >> > If it works, please give the patch there a try, IMO this> >one should see> >> > 2.6.2[34].X stable kernels soon.> >>> >> I have got the lastest kernel 2.6.25-rc8 today. I observed that> >> the referenced patch is already in the kernel. However this didn't> >> solve the problem in question. I get the same Oops on this kernel> >> as well. Find the latest dmesg along with the Oops:> >Ok.> >Maybe best is you document the backtraces/oopses with kernel> >versions at> >bugzilla.kernel.org and add dmesg and acpidump.> >It seems your machine notifies OS that the C-state table changed.> >AFAIK this is rare and there might be a general bug in the> >cpuidle layer> >which I do not know well.> >Best you add Venkatesh and Shaohua Li <shaohua.li@intel.com> to CC of> >the bug.> >While the backtrace shows a lot, cpuidle IMO is missing a general debug> >option like in the cpufreq layer.> >I couldn't find a single printk in the whole cpuidle/{cpuidle,sysfs}.c> >files, even on error paths. Also in the cpuidle specific parts of> >drivers/acpi/processor_idle.c some debug printks may help for> >future bug> >reports. It is very hard to guess what happened...> >>> This looks like cpuidle and kobject interaction.> The latest oops looks different from the original one. Latest one is a> warn_on in lib/kref.c:43>> We (Me or Shaohua) will take a deeper look at get back on this.
Thank you for the update. Let me know if I can be of any help!
Kind Regards,Sanjeev
>> Thanks,> Venki>>ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: [>=2.6.23][BUG] Oops on power disconnection
2008-04-05 13:15 ` Sanjeev Aditya Naga
@ 2008-05-03 9:55 ` Sanjeev Aditya Naga
0 siblings, 0 replies; 13+ messages in thread
From: Sanjeev Aditya Naga @ 2008-05-03 9:55 UTC (permalink / raw)
To: trenn
Cc: Andrew Morton, linux-kernel, linux-acpi, Venkatesh Pallipadi, Li,
Shaohua
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=UTF-8, Size: 4501 bytes --]
Hello Thomas, Andrew,
The recent patch given by Venkatesh athttp://bugzilla.kernel.org/show_bug.cgi?id=10394has fixed the problem. Thank you all for the supportextended regarding the same.
Kind Regards,Sanjeev
On Sat, Apr 5, 2008 at 6:45 PM, Sanjeev Aditya Naga<sanjeev.kernel@gmail.com> wrote:> Hello Thomas,>>>> On Fri, Apr 4, 2008 at 2:34 AM, Thomas Renninger <trenn@suse.de> wrote:> >> >> > On Thu, 2008-04-03 at 21:45 +0530, Sanjeev Aditya Naga wrote:> > > Hello Thomas,> > >> > > On Wed, Apr 2, 2008 at 11:42 PM, Thomas Renninger <trenn@suse.de> wrote:> > > >> > > > On Wed, 2008-04-02 at 21:43 +0530, Sanjeev Aditya Naga wrote:> > > > > Hello Thomas,> > > > >> > > > > > Hi,> > > > > >> > > > > >> > > > > > On Wed, 2008-04-02 at 18:38 +0530, Sanjeev Aditya Naga wrote:> > > > > > > Hello Andrew Morton,> > > > > > >> > > > > > > Greetings!> > > > > > >> > > > > > > Thank you for the update. Is there anything I can do> > > > > > > from my side?> > > > > > >> > > > > > > I thought it was a acpi (dsdt) problem. And based on> > > > > > > a tutorial, I have tried to extract, fix, recompile the dsdt> > > > > > > and use it with the kernel. But still I have the same problem.> > > > > > > Let me know if I shall attach the dsdt (original) decompiled> > > > > > > code, if that helps.> > > > > >> > > > > > this could be due a general memory corruption problem through ACPICA.> > > > > > If you get different backtraces on reboots even you only modified things> > > > > > that do not have to do with the problem, it's probably that and related> > > > > > to:> > > > > > http://bugzilla.kernel.org/show_bug.cgi?id=10339> > > > > >> > > > > > You might want to try the latest kernel or the patch posted there.> > > > >> > > > > Thank you for the update.> > > > > I have checked the bug and unfortunately its not the> > > > > same issue. Things work absolutely fine, when I'm> > > > > running on AC power. It even displays the exact> > > > > battery (and charging) status to me. It messes up> > > > > when suddenly AC power gets disconnected and> > > > > switches to battery mode (The time when I get Oops).> > > > > The system is still usable after switching to battery> > > > > mode and I still get correct battery stats until its> > > > > completely discharged. However most of the commands> > > > > like kill, poweroff, java doesn't work after the Oops.> > > > The bug is not related to battery, but to AML parsing and can therefore> > > > affect anything which is ACPI related.> > > >> > > >> > > > > BTW there is one similarity with the referenced bug.> > > > > If I boot the computer without AC Power, it gives the> > > > > same Oops and stops during booting itself.> > > > >> > > > > I shall try the latest kernel once and shall update you.> > > > That would be great.> > > > If it works, please give the patch there a try, IMO this one should see> > > > 2.6.2[34].X stable kernels soon.> > >> > > I have got the lastest kernel 2.6.25-rc8 today. I observed that> > > the referenced patch is already in the kernel. However this didn't> > > solve the problem in question. I get the same Oops on this kernel> > > as well. Find the latest dmesg along with the Oops:> > Ok.> > Maybe best is you document the backtraces/oopses with kernel versions at> > bugzilla.kernel.org and add dmesg and acpidump.> > It seems your machine notifies OS that the C-state table changed.> > AFAIK this is rare and there might be a general bug in the cpuidle layer> > which I do not know well.> > Best you add Venkatesh and Shaohua Li <shaohua.li@intel.com> to CC of> > the bug.> > While the backtrace shows a lot, cpuidle IMO is missing a general debug> > option like in the cpufreq layer.> > I couldn't find a single printk in the whole cpuidle/{cpuidle,sysfs}.c> > files, even on error paths. Also in the cpuidle specific parts of> > drivers/acpi/processor_idle.c some debug printks may help for future bug> > reports. It is very hard to guess what happened...>> Thank you for the update:>> I have just registered a bug at> http://bugzilla.kernel.org/show_bug.cgi?id=10394> as directed by you.>> Kind Regards,> Sanjeev>ÿôèº{.nÇ+‰·Ÿ®‰†+%ŠËÿ±éݶ\x17¥Šwÿº{.nÇ+‰·¥Š{±þG«éÿŠ{ayº\x1dʇڙë,j\a¢f£¢·hšïêÿ‘êçz_è®\x03(階ŠÝ¢j"ú\x1a¶^[m§ÿÿ¾\a«þG«éÿ¢¸?™¨èÚ&£ø§~á¶iO•æ¬z·švØ^\x14\x04\x1a¶^[m§ÿÿÃ\fÿ¶ìÿ¢¸?–I¥
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2008-05-03 9:55 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <5681ec900803300645l5369cda4g119957a4b7f05d17@mail.gmail.com>
2008-03-30 13:51 ` [>=2.6.23][BUG] Oops on power disconnection Sanjeev Aditya Naga
2008-03-31 4:00 ` Sanjeev Aditya Naga
2008-04-02 7:14 ` Andrew Morton
2008-04-02 13:08 ` Sanjeev Aditya Naga
2008-04-02 14:48 ` Thomas Renninger
2008-04-02 16:13 ` Sanjeev Aditya Naga
2008-04-02 18:12 ` Thomas Renninger
2008-04-03 16:15 ` Sanjeev Aditya Naga
2008-04-03 21:04 ` Thomas Renninger
2008-04-04 0:31 ` Pallipadi, Venkatesh
2008-04-05 18:05 ` Sanjeev Aditya Naga
2008-04-05 13:15 ` Sanjeev Aditya Naga
2008-05-03 9:55 ` Sanjeev Aditya Naga
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).