Re: [PATCH v6 1/3] dt-bindings: phy: Add DT bindings for Xilinx ZynqMP PSGTR PHY

[Kishon Vijay Abraham I <kishon@ti.com>]

+Rob

On 11/03/20 4:02 pm, Laurent Pinchart wrote:
> From: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
> 
> Add DT bindings for the Xilinx ZynqMP PHY. ZynqMP SoCs have a High Speed
> Processing System Gigabit Transceiver which provides PHY capabilities to
> USB, SATA, PCIE, Display Port and Ehernet SGMII controllers.
> 
> Signed-off-by: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Changes since v5:
> 
> - Document clocks and clock-names properties
> - Document resets and reset-names properties
> - Replace subnodes with an additional entry in the PHY cells
> - Drop lane frequency PHY cell, replaced by reference clock phandle
> - Convert bindings to YAML
> - Reword the subject line
> - Drop Rob's R-b as the bindings have significantly changed
> - Drop resets and reset-names properties
> ---
>  .../bindings/phy/xlnx,zynqmp-psgtr.yaml       | 104 ++++++++++++++++++
>  include/dt-bindings/phy/phy.h                 |   1 +
>  2 files changed, 105 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
> 
> diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
> new file mode 100644
> index 000000000000..9948e4a60e45
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
> @@ -0,0 +1,104 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Xilinx ZynqMP Gigabit Transceiver PHY Device Tree Bindings
> +
> +maintainers:
> +  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> +
> +description: |
> +  This binding describes the Xilinx ZynqMP Gigabit Transceiver (GTR) PHY. The
> +  GTR provides four lanes and is used by USB, SATA, PCIE, Display port and
> +  Ethernet SGMII controllers.
> +
> +properties:
> +  "#phy-cells":
> +    const: 4
> +    description: |
> +      The cells contain the following arguments.
> +
> +      - description: The GTR lane
> +        minimum: 0
> +        maximum: 3
> +      - description: The PHY type
> +        enum:
> +          - PHY_TYPE_DP
> +          - PHY_TYPE_PCIE
> +          - PHY_TYPE_SATA
> +          - PHY_TYPE_SGMII
> +          - PHY_TYPE_USB
> +      - description: The PHY instance
> +        minimum: 0
> +        maximum: 1 # for DP, SATA or USB
> +        maximum: 3 # for PCIE or SGMII
> +      - description: The reference clock number
> +        minimum: 0
> +        maximum: 3
> +
> +  compatible:
> +    enum:
> +      - xlnx,zynqmp-psgtr-v1.1
> +      - xlnx,zynqmp-psgtr
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 4
> +    description: |
> +      Clock for each PS_MGTREFCLK[0-3] reference clock input. Unconnected
> +      inputs shall not have an entry.
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 4
> +    items:
> +      pattern: "^ref[0-3]$"
> +
> +  reg:
> +    items:
> +      - description: SERDES registers block
> +      - description: SIOU registers block
> +
> +  reg-names:
> +    items:
> +      - const: serdes
> +      - const: siou
> +
> +required:
> +  - "#phy-cells"
> +  - compatible
> +  - reg
> +  - reg-names
> +
> +if:
> +  properties:
> +    compatible:
> +      const: xlnx,zynqmp-psgtr
> +
> +then:
> +  properties:
> +    xlnx,tx-termination-fix:
> +      description: |
> +        Include this for fixing functional issue with the TX termination
> +        resistance in GT, which can be out of spec for the XCZU9EG silicon
> +        version.
> +      type: boolean
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    phy: phy@fd400000 {
> +      compatible = "xlnx,zynqmp-psgtr-v1.1";
> +      reg = <0x0 0xfd400000 0x0 0x40000>,
> +            <0x0 0xfd3d0000 0x0 0x1000>;
> +      reg-names = "serdes", "siou";
> +      clocks = <&refclks 3>, <&refclks 2>, <&refclks 0>;
> +      clock-names = "ref1", "ref2", "ref3";
> +      #phy-cells = <4>;
> +      status = "okay";
> +    };
> +
> +...
> diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h
> index 1f3f866fae7b..f6bc83b66ae9 100644
> --- a/include/dt-bindings/phy/phy.h
> +++ b/include/dt-bindings/phy/phy.h
> @@ -17,5 +17,6 @@
>  #define PHY_TYPE_USB3		4
>  #define PHY_TYPE_UFS		5
>  #define PHY_TYPE_DP		6
> +#define PHY_TYPE_SGMII		7
>  
>  #endif /* _DT_BINDINGS_PHY */
>