LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Ardelean, Alexandru" <alexandru.Ardelean@analog.com>
To: "renatogeh@gmail.com" <renatogeh@gmail.com>,
	"jic23@kernel.org" <jic23@kernel.org>
Cc: "kernel-usp@googlegroups.com" <kernel-usp@googlegroups.com>,
	"lars@metafoo.de" <lars@metafoo.de>,
	"robh+dt@kernel.org" <robh+dt@kernel.org>,
	"Popa, Stefan Serban" <StefanSerban.Popa@analog.com>,
	"knaack.h@gmx.de" <knaack.h@gmx.de>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	"Hennerich, Michael" <Michael.Hennerich@analog.com>,
	"linux-iio@vger.kernel.org" <linux-iio@vger.kernel.org>,
	"devel@driverdev.osuosl.org" <devel@driverdev.osuosl.org>,
	"mark.rutland@arm.com" <mark.rutland@arm.com>,
	"pmeerw@pmeerw.net" <pmeerw@pmeerw.net>,
	"gregkh@linuxfoundation.org" <gregkh@linuxfoundation.org>
Subject: Re: [PATCH] dt-bindings: iio: adc: add adi,ad7780.yaml binding
Date: Mon, 20 May 2019 08:32:36 +0000	[thread overview]
Message-ID: <5d7ad2935d1e357f1c0885badc5ce3c351c8ed89.camel@analog.com> (raw)
In-Reply-To: <20190519123208.26c864ce@archlinux>

On Sun, 2019-05-19 at 12:32 +0100, Jonathan Cameron wrote:
> [External]
> 
> 
> On Sat, 18 May 2019 19:41:12 -0300
> Renato Lui Geh <renatogeh@gmail.com> wrote:
> 
> > This patch adds a YAML binding for the Analog Devices AD7780/1 and
> > AD7170/1 analog-to-digital converters.
> > 
> > Signed-off-by: Renato Lui Geh <renatogeh@gmail.com>
> 
> One comment inline.  I'll also be needing an ack from Analog on this,
> preferably Michael's.
> 
> Thanks,
> 
> Jonathan
> > ---
> >  .../bindings/iio/adc/adi,ad7780.txt           | 48 -----------
> >  .../bindings/iio/adc/adi,ad7780.yaml          | 85 +++++++++++++++++++

You should also update the MAINTAINERS file.
Maybe in a following patch.
It looks like there is not entry in there, so maybe you need to add a new
one.

Something like:


ANALOG DEVICES INC AD7780 DRIVER
M:      Michael Hennerich <Michael.Hennerich@analog.com>
M:      Renato Lui Geh <renatogeh@gmail.com>
L:      linux-iio@vger.kernel.org
W:      http://ez.analog.com/community/linux-device-drivers
S:      Supported
F:      drivers/iio/adc/ad7780.c
F:      Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml

This should be after this block
ANALOG DEVICES INC AD7768-1 DRIVER

Note that I added you as a co-maintainer.
If you want, you do not need to add that line.

> >  2 files changed, 85 insertions(+), 48 deletions(-)
> >  delete mode 100644
> > Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
> >  create mode 100644
> > Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
> > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
> > deleted file mode 100644
> > index 440e52555349..000000000000
> > --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.txt
> > +++ /dev/null
> > @@ -1,48 +0,0 @@
> > -* Analog Devices AD7170/AD7171/AD7780/AD7781
> > -
> > -Data sheets:
> > -
> > -- AD7170:
> > -     * 
> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
> > -- AD7171:
> > -     * 
> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
> > -- AD7780:
> > -     * 
> > https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
> > -- AD7781:
> > -     * 
> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
> > -
> > -Required properties:
> > -
> > -- compatible: should be one of
> > -     * "adi,ad7170"
> > -     * "adi,ad7171"
> > -     * "adi,ad7780"
> > -     * "adi,ad7781"
> > -- reg: spi chip select number for the device
> > -- vref-supply: the regulator supply for the ADC reference voltage
> > -
> > -Optional properties:
> > -
> > -- powerdown-gpios:  must be the device tree identifier of the PDRST
> > pin. If
> > -                 specified, it will be asserted during driver probe.
> > As the
> > -                 line is active high, it should be marked
> > GPIO_ACTIVE_HIGH.
> > -- adi,gain-gpios:   must be the device tree identifier of the GAIN
> > pin. Only for
> > -                 the ad778x chips. If specified, it will be asserted
> > during
> > -                 driver probe. As the line is active low, it should be
> > marked
> > -                 GPIO_ACTIVE_LOW.
> > -- adi,filter-gpios: must be the device tree identifier of the FILTER
> > pin. Only
> > -                 for the ad778x chips. If specified, it will be
> > asserted
> > -                 during driver probe. As the line is active low, it
> > should be
> > -                 marked GPIO_ACTIVE_LOW.
> > -
> > -Example:
> > -
> > -adc@0 {
> > -     compatible =  "adi,ad7780";
> > -     reg =         <0>;
> > -     vref-supply = <&vdd_supply>
> > -
> > -     powerdown-gpios  = <&gpio 12 GPIO_ACTIVE_HIGH>;
> > -     adi,gain-gpios   = <&gpio  5 GPIO_ACTIVE_LOW>;
> > -     adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
> > -};
> > diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> > b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> > new file mode 100644
> > index 000000000000..931bc4f8ec04
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
> > @@ -0,0 +1,85 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/iio/adc/adi,ad7780.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Analog Devices AD7170/AD7171/AD7780/AD7781 analog to digital
> > converters
> > +
> > +maintainers:
> > +  - Michael Hennerich <michael.hennerich@analog.com>
> > +
> > +description: |
> > +  The ad7780 is a sigma-delta analog to digital converter. This driver
> > provides
> > +  reading voltage values and status bits from both the ad778x and
> > ad717x series.
> > +  Its interface also allows writing on the FILTER and GAIN GPIO pins
> > on the
> > +  ad778x.
> > +
> > +  Specifications on the converters can be found at:
> > +    AD7170:
> > +      
> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7170.pdf
> > +    AD7171:
> > +      
> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7171.pdf
> > +    AD7780:
> > +      
> > https://www.analog.com/media/en/technical-documentation/data-sheets/ad7780.pdf
> > +    AD7781:
> > +      
> > https://www.analog.com/media/en/technical-documentation/data-sheets/AD7781.pdf
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - adi,ad7170
> > +      - adi,ad7171
> > +      - adi,ad7780
> > +      - adi,ad7781
> > +
> > +  reg:
> > +    description:
> > +      Chip select number for the device

No need to add a description.
This is pretty standard.

> > +    maxItems: 1
> > +
> > +  vref-supply:
> > +    description:
> > +      The regulator supply for the ADC reference voltage
> > +    maxItems: 1
> > +

As I see in the driver, it's not vref-supply, it's avdd-supply.

> > +  powerdown-gpios:
> > +    description:
> > +      Must be the device tree identifier of the PDRST pin. If
> > +      specified, it will be asserted during driver probe. As the
> > +      line is active high, it should be marked GPIO_ACTIVE_HIGH.
> > +    maxItems: 1
> > +
> > +  adi,gain-gpios:
> > +    description:
> > +      Must be the device tree identifier of the GAIN pin. Only for
> > +      the ad778x chips. If specified, it will be asserted during
> > +      driver probe. As the line is active low, it should be marked
> > +      GPIO_ACTIVE_LOW.
> > +    maxItems: 1
> > +
> > +  adi,filter-gpios:
> > +    description:
> > +      Must be the device tree identifier of the FILTER pin. Only
> > +      for the ad778x chips. If specified, it will be asserted
> > +      during driver probe. As the line is active low, it should be
> > +      marked GPIO_ACTIVE_LOW.
> > +    maxItems: 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - vref-supply
> 
> Is that actually true?  I'd imagine it'll use a stub regulator if
> it isn't supplied.

Hmm, I also think this can be omitted as required.
devm_regulator_get() is used.
devm_regulator_get_exclusive() would be needed to make this required.

> 
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    adc@0 {

The adc@0 block should be included in a spi block.

So, something like

spi0 {
     adc@0 {
            compatible =  "adi,ad7780";
            reg =         <0>;
            avdd-supply = <&vdd_supply>

            powerdown-gpios  = <&gpio 12 GPIO_ACTIVE_HIGH>;
            adi,gain-gpios   = <&gpio  5 GPIO_ACTIVE_LOW>;
            adi,filter-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
     };
};

I know this wasn't the case before, but it should be (from what I recall).

> > +      compatible =  "adi,ad7780";
> > +      reg = <0>;
> > +      vref-supply = <&vdd_supply>;
> > +
> > +      powerdown-gpios  = <&gpio0 12 GPIO_ACTIVE_HIGH>;
> > +      adi,gain-gpios   = <&gpio1  5 GPIO_ACTIVE_LOW>;
> > +      adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;

Rest looks good.

Thanks
Alex

> > +    };
> 
> 

  reply	other threads:[~2019-05-20  8:32 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-18 22:41 Renato Lui Geh
2019-05-19 11:32 ` Jonathan Cameron
2019-05-20  8:32   ` Ardelean, Alexandru [this message]
2019-05-25  0:28     ` Renato Lui Geh
2019-05-26 17:50       ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5d7ad2935d1e357f1c0885badc5ce3c351c8ed89.camel@analog.com \
    --to=alexandru.ardelean@analog.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=StefanSerban.Popa@analog.com \
    --cc=devel@driverdev.osuosl.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jic23@kernel.org \
    --cc=kernel-usp@googlegroups.com \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pmeerw@pmeerw.net \
    --cc=renatogeh@gmail.com \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH] dt-bindings: iio: adc: add adi,ad7780.yaml binding' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).