LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* BUG: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in blk_finish_request
@ 2018-05-23  3:55 jianchao.wang
  2018-05-24  1:50 ` jianchao.wang
  0 siblings, 1 reply; 3+ messages in thread
From: jianchao.wang @ 2018-05-23  3:55 UTC (permalink / raw)
  To: qla2xxx-upstream, himanshu.madhani, jthumshirn
  Cc: linux-scsi, linux-kernel, jejb, Martin K. Petersen, Junxiao Bi



Hi all

Our customer met a panic triggered by BUG_ON in blk_finish_request.
>From the dmesg log, the BUG_ON was triggered after command abort occurred many times.
There is a race condition in the following scenario.

cpu A                                   cpu B
kworker                                 interrupt
                                                 
scmd_eh_abort_handler()                               
  -> scsi_try_to_abort_cmd()
    -> qla2xxx_eh_abort()                        
      -> qla2x00_eh_wait_on_command()   qla2x00_status_entry()   
                                          -> qla2x00_sp_compl()
                                            -> qla2x00_sp_free_dma()
  -> scsi_queue_insert()                          
    -> __scsi_queue_insert()                         
      -> blk_requeue_request()
        -> blk_clear_rq_complete()
                                            -> scsi_done
                                              -> blk_complete_request
                                                -> blk_mark_rq_complete       
          -> elv_requeue_request()              -> __blk_complete_request()
            -> __elv_add_request()
            // req will be queued here                                                         
                                                    BLK_SOFTIRQ
                                                    scsi_softirq_done()
                                                      -> scsi_finish_command()
                                                        -> scsi_io_completion()
                                                          -> scsi_end_request()
                                                            -> blk_finish_request()  // BUG_ON(blk_queued_rq(req)) !!!

The issue will not be triggered most of time, because the request is marked as complete by timeout path.
So the scsi_done from qla2x00_sp_compl does nothing.
But as the scenario above, if the complete state has been cleaned by blk_requeue_request, we will get
the request both requeued and completed, and then BUG_ON(blk_queued_rq(req)) in blk_finish_request comes up.

Is there any solution for this in qla2xxx driver side ?

Thanks
Jianchao

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: BUG: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in blk_finish_request
  2018-05-23  3:55 BUG: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in blk_finish_request jianchao.wang
@ 2018-05-24  1:50 ` jianchao.wang
       [not found]   ` <SN4PR0701MB363286637D0317358D61ECBFF56A0@SN4PR0701MB3632.namprd07.prod.outlook.com>
  0 siblings, 1 reply; 3+ messages in thread
From: jianchao.wang @ 2018-05-24  1:50 UTC (permalink / raw)
  To: qla2xxx-upstream, himanshu.madhani, jthumshirn
  Cc: linux-scsi, linux-kernel, jejb, Martin K. Petersen, Junxiao Bi

Would anyone please take a look at this ?

Thanks in advance
Jianchao

On 05/23/2018 11:55 AM, jianchao.wang wrote:
> 
> 
> Hi all
> 
> Our customer met a panic triggered by BUG_ON in blk_finish_request.
>>From the dmesg log, the BUG_ON was triggered after command abort occurred many times.
> There is a race condition in the following scenario.
> 
> cpu A                                   cpu B
> kworker                                 interrupt
>                                                  
> scmd_eh_abort_handler()                               
>   -> scsi_try_to_abort_cmd()
>     -> qla2xxx_eh_abort()                        
>       -> qla2x00_eh_wait_on_command()   qla2x00_status_entry()   
>                                           -> qla2x00_sp_compl()
>                                             -> qla2x00_sp_free_dma()
>   -> scsi_queue_insert()                          
>     -> __scsi_queue_insert()                         
>       -> blk_requeue_request()
>         -> blk_clear_rq_complete()
>                                             -> scsi_done
>                                               -> blk_complete_request
>                                                 -> blk_mark_rq_complete       
>           -> elv_requeue_request()              -> __blk_complete_request()
>             -> __elv_add_request()
>             // req will be queued here                                                         
>                                                     BLK_SOFTIRQ
>                                                     scsi_softirq_done()
>                                                       -> scsi_finish_command()
>                                                         -> scsi_io_completion()
>                                                           -> scsi_end_request()
>                                                             -> blk_finish_request()  // BUG_ON(blk_queued_rq(req)) !!!
> 
> The issue will not be triggered most of time, because the request is marked as complete by timeout path.
> So the scsi_done from qla2x00_sp_compl does nothing.
> But as the scenario above, if the complete state has been cleaned by blk_requeue_request, we will get
> the request both requeued and completed, and then BUG_ON(blk_queued_rq(req)) in blk_finish_request comes up.
> 
> Is there any solution for this in qla2xxx driver side ?
> 
> Thanks
> Jianchao
> 
> 

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: BUG: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in blk_finish_request
       [not found]   ` <SN4PR0701MB363286637D0317358D61ECBFF56A0@SN4PR0701MB3632.namprd07.prod.outlook.com>
@ 2018-05-24  9:09     ` jianchao.wang
  0 siblings, 0 replies; 3+ messages in thread
From: jianchao.wang @ 2018-05-24  9:09 UTC (permalink / raw)
  To: Madhani, Himanshu, Dept-Eng QLA2xxx Upstream, jthumshirn
  Cc: linux-scsi, linux-kernel, jejb, Martin K. Petersen, Junxiao Bi

Hi Himanshu

Thanks god get response from your side finally :)
I get qla2xxx-upstream@qlogic.com from the maintainer information of driver/scsi/qla2xxx
Looks like it should be modified.

Thanks
Jianchao

On 05/24/2018 12:21 PM, Madhani, Himanshu wrote:
> Hi, 
> 
> Yes. We'll look at this issue. 
> 
> Thanks,
> Himanshu  
> 
>> -----Original Message-----
>> From: jianchao.wang [mailto:jianchao.w.wang@oracle.com]
>> Sent: Wednesday, May 23, 2018 6:51 PM
>> To: Dept-Eng QLA2xxx Upstream <qla2xxx-upstream@cavium.com>; Madhani,
>> Himanshu <Himanshu.Madhani@cavium.com>; jthumshirn@suse.de
>> Cc: linux-scsi@vger.kernel.org; linux-kernel@vger.kernel.org;
>> jejb@linux.vnet.ibm.com; Martin K. Petersen <martin.petersen@oracle.com>;
>> Junxiao Bi <junxiao.bi@oracle.com>
>> Subject: Re: BUG: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in
>> blk_finish_request
>>
>> Would anyone please take a look at this ?
>>
>> Thanks in advance
>> Jianchao
>>
>> On 05/23/2018 11:55 AM, jianchao.wang wrote:
>>>
>>>
>>> Hi all
>>>
>>> Our customer met a panic triggered by BUG_ON in blk_finish_request.
>>> >From the dmesg log, the BUG_ON was triggered after command abort
>> occurred many times.
>>> There is a race condition in the following scenario.
>>>
>>> cpu A                                   cpu B
>>> kworker                                 interrupt
>>>
>>> scmd_eh_abort_handler()
>>>   -> scsi_try_to_abort_cmd()
>>>     -> qla2xxx_eh_abort()
>>>       -> qla2x00_eh_wait_on_command()   qla2x00_status_entry()
>>>                                           -> qla2x00_sp_compl()
>>>                                             -> qla2x00_sp_free_dma()
>>>   -> scsi_queue_insert()
>>>     -> __scsi_queue_insert()
>>>       -> blk_requeue_request()
>>>         -> blk_clear_rq_complete()
>>>                                             -> scsi_done
>>>                                               -> blk_complete_request
>>>                                                 -> blk_mark_rq_complete
>>>           -> elv_requeue_request()              -> __blk_complete_request()
>>>             -> __elv_add_request()
>>>             // req will be queued here
>>>                                                     BLK_SOFTIRQ
>>>                                                     scsi_softirq_done()
>>>                                                       -> scsi_finish_command()
>>>                                                         -> scsi_io_completion()
>>>                                                           -> scsi_end_request()
>>>                                                             -> blk_finish_request()  //
>> BUG_ON(blk_queued_rq(req)) !!!
>>>
>>> The issue will not be triggered most of time, because the request is marked as
>> complete by timeout path.
>>> So the scsi_done from qla2x00_sp_compl does nothing.
>>> But as the scenario above, if the complete state has been cleaned by
>> blk_requeue_request, we will get
>>> the request both requeued and completed, and then
>> BUG_ON(blk_queued_rq(req)) in blk_finish_request comes up.
>>>
>>> Is there any solution for this in qla2xxx driver side ?
>>>
>>> Thanks
>>> Jianchao
>>>
>>>

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2018-05-24  9:09 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-23  3:55 BUG: scsi/qla2xxx: BUG_ON(blk_queued_rq(req) is triggered in blk_finish_request jianchao.wang
2018-05-24  1:50 ` jianchao.wang
     [not found]   ` <SN4PR0701MB363286637D0317358D61ECBFF56A0@SN4PR0701MB3632.namprd07.prod.outlook.com>
2018-05-24  9:09     ` jianchao.wang

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).