LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* Bug?
@ 2007-04-01 13:39 Sascha Curth
  2007-04-01 13:54 ` Bug? Michal Piotrowski
  0 siblings, 1 reply; 12+ messages in thread
From: Sascha Curth @ 2007-04-01 13:39 UTC (permalink / raw)
  To: linux-kernel

Hi,

i hav essen this in my logfiles. The server wasn't rechable any more and
a hard reset was needed....



Kernel: 2.6.18
Logfile:

Mar 29 22:18:07 seven ------------[ cut here ]------------
Mar 29 22:18:07 seven kernel BUG at mm/rmap.c:522!
Mar 29 22:18:07 seven invalid opcode: 0000 [#1]
Mar 29 22:18:07 seven SMP 
Mar 29 22:18:07 seven Modules linked in: capi capifs st fcdsl
Mar 29 22:18:07 seven CPU:    0
Mar 29 22:18:07 seven EIP:    0060:[<c0151a46>]    Tainted: P S    VLI
Mar 29 22:18:07 seven EFLAGS: 00210286   (2.6.18-gentoo-r3 #1) 
Mar 29 22:18:07 seven EIP is at page_remove_rmap+0x26/0x30
Mar 29 22:18:07 seven eax: ffffffff   ebx: d54dda88   ecx: c1ffaa40
edx: 00000000
Mar 29 22:18:07 seven esi: c1ffaa40   edi: b7ea2000   ebp: b7ea4000
esp: ca969edc
Mar 29 22:18:07 seven ds: 007b   es: 007b   ss: 0068
Mar 29 22:18:07 seven Process exim (pid: 14060, ti=ca968000
task=f6565580 task.ti=ca968000)
Mar 29 22:18:07 seven Stack: c014bb06 00000000 f639af98 ca969f48
00000000 00000001 d6f50b7c f7c1a900 
Mar 29 22:18:07 seven c200be20 00000000 fffffffc c12a9bac d6f50b7c
7fd52025 b7ea3fff 00294bfc 
Mar 29 22:18:07 seven b7ea4000 00000000 ca969f48 dd471128 f7c1a900
ca968000 c014e989 ffffffff 
Mar 29 22:18:07 seven Call Trace:
Mar 29 22:18:07 seven [<c014bb06>] unmap_vmas+0x286/0x520
Mar 29 22:18:07 seven [<c014e989>] exit_mmap+0x79/0x100
Mar 29 22:18:07 seven [<c011b9c3>] mmput+0x33/0xa0
Mar 29 22:18:07 seven [<c0120c23>] do_exit+0xf3/0x8b0
Mar 29 22:18:07 seven [<c01126b7>] do_page_fault+0xe7/0x5ab
Mar 29 22:18:07 seven [<c0121413>] do_group_exit+0x33/0x90
Mar 29 22:18:07 seven [<c0102e2d>] sysenter_past_esp+0x56/0x79
Mar 29 22:18:07 seven Code: bf 00 00 00 00 89 c1 90 83 40 08 ff 0f 98 c0
84 c0 75 02 f3 c3 8b 41 08 40 78 10 8b 51 10 89 c8 83 f2 01 83 e2 01 e9
ba 81 ff f
f <0f> 0b 0a 02 88 90 51 c0 eb e6 83 ec 20 89 74 24 14 89 d6 89 5c 
Mar 29 22:18:07 seven EIP: [<c0151a46>] page_remove_rmap+0x26/0x30
SS:ESP 0068:ca969edc
Mar 29 22:18:07 seven <1>Fixing recursive fault but reboot is needed!



^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: Bug?
  2007-04-01 13:39 Bug? Sascha Curth
@ 2007-04-01 13:54 ` Michal Piotrowski
  0 siblings, 0 replies; 12+ messages in thread
From: Michal Piotrowski @ 2007-04-01 13:54 UTC (permalink / raw)
  To: info; +Cc: linux-kernel

Hi,

On 01/04/07, Sascha Curth <info@sascha-curth.de> wrote:
> Hi,
>
> i hav essen this in my logfiles. The server wasn't rechable any more and
> a hard reset was needed....

Yes, that's a bug.

>
>
>
> Kernel: 2.6.18
> Logfile:
>
> Mar 29 22:18:07 seven ------------[ cut here ]------------
> Mar 29 22:18:07 seven kernel BUG at mm/rmap.c:522!
> Mar 29 22:18:07 seven invalid opcode: 0000 [#1]
> Mar 29 22:18:07 seven SMP
> Mar 29 22:18:07 seven Modules linked in: capi capifs st fcdsl
> Mar 29 22:18:07 seven CPU:    0
> Mar 29 22:18:07 seven EIP:    0060:[<c0151a46>]    Tainted: P S    VLI

You are using proprietary module. Please reproduce with an untainted kernel.

Regards,
Michal

-- 
Michal K. K. Piotrowski
Hurd Testers Group
(http://www.hurdtestersgroup.org/)

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: BUG?
  2002-05-21  9:48 BUG? alex-n
@ 2002-05-21 10:14 ` Wilfried Weissmann
  0 siblings, 0 replies; 12+ messages in thread
From: Wilfried Weissmann @ 2002-05-21 10:14 UTC (permalink / raw)
  To: alex-n; +Cc: linux-kernel

alex-n@ua.fm wrote:
> Dear Sirs,
> this can be lamer's question (I'm sorry rite now!), but...
> 
> The report itself is:
> 
> ################################################################################
> 
> [1.] Linux crashes at the 'interactive startup' boot stage.
> 
> [2.] Once the system is trying to boot, first stage (which is
>      *before* msg 'Interactive startup') it is all O.K. Once the
>      'Interactive startup' stage begins, the bootstrap process
>      fails with diffirent msgs; all of them begins with "Unable
>      to handle kernel paging request at address..." or "Unable
>      to handle kernel dereference at address..." (first 'reason'
>      is in the majority of cases, the second is quite unusual).
> 
>      It seems to me that this is a trouble with initrd.img,
>      because once I've recompiled kernel with ALL OPTIONS (not
>      suitable to my hardware, i.e. SCSI adapters) turned OFF,
>      the problem remains.
[snip]

2.4.7 does not have some VIA chipset workarounds that caused oopses when 
the kernel was compiled with K7 optimization. So set the optimization to 
AMD K6 or use a more recent kernel version. I think 2.4.16 and later 
versions have fixed this problem.

hope this helps,
Wilfried


^ permalink raw reply	[flat|nested] 12+ messages in thread

* BUG?
@ 2002-05-21  9:48 alex-n
  2002-05-21 10:14 ` BUG? Wilfried Weissmann
  0 siblings, 1 reply; 12+ messages in thread
From: alex-n @ 2002-05-21  9:48 UTC (permalink / raw)
  To: linux-kernel

Dear Sirs,
this can be lamer's question (I'm sorry rite now!), but...

The report itself is:

################################################################################

[1.] Linux crashes at the 'interactive startup' boot stage.

[2.] Once the system is trying to boot, first stage (which is
     *before* msg 'Interactive startup') it is all O.K. Once the
     'Interactive startup' stage begins, the bootstrap process
     fails with diffirent msgs; all of them begins with "Unable
     to handle kernel paging request at address..." or "Unable
     to handle kernel dereference at address..." (first 'reason'
     is in the majority of cases, the second is quite unusual).

     It seems to me that this is a trouble with initrd.img,
     because once I've recompiled kernel with ALL OPTIONS (not
     suitable to my hardware, i.e. SCSI adapters) turned OFF,
     the problem remains.
     
     I've notices that sometimes such a trouble is 'reached'
     with 'IH' flag of 'EFLAGS' (bit no 10) set to zero. As far
     as I know it's status, it tells CPU ignore any interrupt
     requests... The keyboard stops functioning on such a crashes
     as usual, but there was TWO TIMES the keyboard remains it's
     working state like an echo, not like control-device. :-\
     May be, it's lamer's notice, I do not know, but I thought
     this may be useful...
     
     I thouht that hardware configuration may be useful too:
        M/B: GigaByte GA-7ZX-H
	     Chipset: VIA Apollo KT133A
	     Features: VIA AC'97 audio on VT82C686B
	CPU: AMD Athlon Thunderbird 900 MHz, FSB 100 MHz
	RAM: IBM 256 Mb PC-133

[3.] boot process, initrd, rc.sysinit

[4.] Kernel version (from /proc/version):
     Linux version 2.4.7-10BOOT (bhcompile@stripples.devel.redhat.com)
     (gcc version 2.96 20000731 (Red Hat Linux 7.1 2.96-98)) 
     #1 Thu Sep 6 16:15:00 EDT 2001

[5.] Output of Oops.. message (if applicable) with symbolic information

     resolved (see Documentation/oops-tracing.txt)

    OK, I'm adding one example (hand-written).

    ---8<-----------------------------------------------------------------------
    <1>Unable to handle kernel paging request at virtual address
0ec3df54
    
    Printing eip:
    c012b69f
    *pde=00000000
    CPU: 0
    EIP: 0010:[<c012b69f>]
    EFLAGS: 00010006
    
    eax: cfcfcfcf   ebx: cfcfcfcf    ecx: 00000282    edx: cfa4a000
    esi: c1723e6c   edi: cfbde200    ebp: cfd27bc0    esp: cfa47d58
    
    ds:  0018
    es:  0018
    ss:  0018
    
    Process rc.sysinit (pid: 29, stackpage=cfa47000)
    
    Stack:  c0230979  c011b03e  c022c9c7  00000000  cfa47df4  fffffff4
 c0146fb8
            c1723e6c  000000f0  c1757e88  cfbe5005  11163d8b  00000005
 cfa47df4
	    fffffff1  cfbde200  cfd27bc0  c013ed7c  cfd27bc0  cfa47df4
 fffffdce
	    cfd27bc0  cfa14df4  00000000
	    
    Call trace:  [<c0230979>]  [<c022b03c>]  [<c022c9c7>]  [<c0146fb8>]
                 [<c013ed7c>]  [<c013f4a6>]  [<c018c1a3>]  [<c013d0f5>]
		 [<c013dabc>]  [<c012e6be>]  [<c0204daf>]  [<c0123c0a>]
		 [<c0123c7d>]  [<c012439c>]  [<c0113450>]  [<c01135ca>]
		 [<c011f717>]  [<c011fad3>]  [<c013eade>]  [<c0105b60>]
		 [<c0106f2b>]
		 
    Code: 8b 44 82 18 0f af 5a 0c 89 42 14 03 5a 0c 40 75 05 8b 02 89
    
    /etc/rc.sysinit: line 49: 29 Segmentation failt /bin/dmesg -n
$LOGLEVEL
    ---8<-----------------------------------------------------------------------

[6.] A small shell script or example program which triggers the
     problem (if possible)

     SORRY, it's impossible. I've made about two hundred tried but
     I've never got just "localhost login:" message... >:-(((

[7.] Environment

[7.1.] Software (add the output of the ver_linux script here)
       If some fields are empty or look unusual you may have an old
version.
       Compare to the current minimal requirements in
Documentation/Changes.
 
       Linux localhost.localdomain 2.4.7-10BOOT
       #1 Thu Sep 6 16:15:00 EDT 2001 i686 unknown
 
	Gnu C                  2.96
	Gnu make               3.79.1
	binutils               2.11.90.0.8
	util-linux             2.11f
	mount                  2.11g
	modutils               2.4.6
	e2fsprogs              tune2fs
	reiserfsprogs          3.x.0j
	PPP                    2.4.1
	isdn4k-utils           3.1pre1
	Linux C Library        2.2.4
	Dynamic linker (ldd)   2.2.4
	Procps                 2.0.7
	Net-tools              1.60
	Console-tools          0.3.3
	Sh-utils               2.0.11
	Modules Loaded         reiserfs ext3 jbd vfat msdos fat raid5 
	                       xor raid1 raid0 usb-storage keybdev hid 
			       input usb-uhci usbcore sr_mod sd_mod scsi_mod

[7.2.] Processor information (from /proc/cpuinfo):
       processor	: 0
       vendor_id	: AuthenticAMD
       cpu family	: 6
       model		: 4
       model name	: AMD Athlon(tm) Processor
       stepping		: 2
       cpu MHz		: 902.081
       cache size	: 256 KB
       fdiv_bug		: no
       hlt_bug		: no
       f00f_bug		: no
       coma_bug		: no
       fpu		: yes
       fpu_exception	: yes
       cpuid level	: 1
       wp		: yes
       flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr 
                          pge mca cmov pat pse36 mmx fxsr syscall
mmxext 
			  3dnowext 3dnow
       bogomips		: 1795.68

[7.3.] Module information (from /proc/modules):
       reiserfs              142480   0 (unused)
       ext3                   57456   0
       jbd                    34560   0 [ext3]
       vfat                    8400   1
       msdos                   4624   0 (unused)
       fat                    29152   0 [vfat msdos]
       raid5                  16080   0 (unused)
       xor                     5488   0 [raid5]
       raid1                  11872   0 (unused)
       raid0                   3056   0 (unused)
       usb-storage            32544   0 (unused)
       keybdev                 1584   0 (unused)
       hid                    18224   0 (unused)
       input                   3136   0 [keybdev hid]
       usb-uhci               20080   0 (unused)
       usbcore                47552   1 [usb-storage hid usb-uhci]
       sr_mod                 12944   0 (unused)
       sd_mod                 10368   0 (unused)
       scsi_mod               49488   2 [usb-storage sr_mod sd_mod]

[7.4.] Loaded driver and hardware information (/proc/ioports,
/proc/iomem)
       /proc/ioports output:
	    0000-001f : dma1
	    0020-003f : pic1
	    0040-005f : timer
	    0060-006f : keyboard
	    0080-008f : dma page reg
	    00a0-00bf : pic2
	    00c0-00df : dma2
	    00f0-00ff : fpu
	    0170-0177 : ide1
	    01f0-01f7 : ide0
	    02f8-02ff : serial(auto)
	    0376-0376 : ide1
	    03c0-03df : vesafb
	    03f6-03f6 : ide0
	    03f8-03ff : serial(auto)
	    0400-040f : PCI device 1106:3057
	    0c00-0c7f : PCI device 1106:3057
	    0cf8-0cff : PCI conf1
	    a000-afff : PCI Bus #01
	    cc00-cc1f : PCI device 1106:3038
	      cc00-cc1f : usb-uhci
	    d000-d01f : PCI device 1106:3038
	      d000-d01f : usb-uhci
	    d400-d403 : PCI device 1106:3058
	    d800-d803 : PCI device 1106:3058
	    dc00-dcff : PCI device 1106:3058
	    ffa0-ffaf : PCI device 1106:0571
	      ffa0-ffa7 : ide0
	      ffa8-ffaf : ide1

       /proc/iomem output:

	    00000000-0009fbff : System RAM
	    0009fc00-0009ffff : reserved
	    000a0000-000bffff : Video RAM area
	    000c0000-000c7fff : Video ROM
	    000f0000-000fffff : System ROM
	    00100000-0ffeffff : System RAM
	      00100000-0021680f : Kernel code
	      00216810-0022cd8b : Kernel data
	    0fff0000-0fff7fff : ACPI Tables
	    0fff8000-0fffffff : ACPI Non-volatile Storage
	    cdc00000-ddcfffff : PCI Bus #01
	      d0000000-d7ffffff : PCI device 10de:0110
	        d0000000-d1ffffff : vesafb
	    dde00000-dfefffff : PCI Bus #01
	      de000000-deffffff : PCI device 10de:0110
	    e0000000-e3ffffff : PCI device 1106:0305
	    ffff0000-ffffffff : reserved

[7.5.] PCI information ('lspci -vvv' as root)

00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133]
(rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
	Latency: 8
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: [a0] AGP version 2.0
		Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133
AGP] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: dde00000-dfefffff
	Prefetchable memory behind bridge: cdc00000-ddcfffff
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super
South] (rev 40)
	Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
(prog-if 8a [Master SecP PriP])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 32
	Region 4: I/O ports at ffa0 [size=16]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
(prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Interrupt: pin D routed to IRQ 9
	Region 4: I/O ports at cc00 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16)
(prog-if 00 [UHCI])
	Subsystem: Unknown device 0925:1234
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64, cache line size 08
	Interrupt: pin D routed to IRQ 9
	Region 4: I/O ports at d000 [size=32]
	Capabilities: [80] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev
40)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Capabilities: [68] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
Controller (rev 50)
	Subsystem: Giga-byte Technology: Unknown device a000
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin C routed to IRQ 10
	Region 0: I/O ports at dc00 [size=256]
	Region 1: I/O ports at d800 [size=4]
	Region 2: I/O ports at d400 [size=4]
	Capabilities: [c0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:00.0 VGA compatible controller: nVidia Corporation NV11 (rev a1)
(prog-if 00 [VGA])
	Subsystem: LeadTek Research Inc.: Unknown device 2830
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (1250ns min, 250ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at de000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M]
	Expansion ROM at dfef0000 [disabled] [size=64K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [44] AGP version 2.0
		Status: RQ=31 SBA- 64bit- FW+ Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

[7.6.] SCSI information (from /proc/scsi/scsi)

       Attached devices: none

[7.7.] Other information that might be relevant to the problem
       (please look in /proc and include all information that you
       think to be relevant):

	---       
       
[X.] Other notes, patches, fixes, workarounds:

     I've tried recompile the kernel from rescue shell, but nothing has
changed.
     
################################################################################
     
     
Thank you in advance.
With kindest regards, Alex Nedovizij.
----
Optimag : Canon PowerShot Pro 90IS : $995
http://pc.optimag.net/browse/27/77/433.html

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: bug ?
  2001-12-31 18:51 ` Stephan von Krawczynski
  2002-01-05 11:44   ` Klaus Zerwes
@ 2002-01-05 15:37   ` Stephan von Krawczynski
  1 sibling, 0 replies; 12+ messages in thread
From: Stephan von Krawczynski @ 2002-01-05 15:37 UTC (permalink / raw)
  To: Klaus Zerwes; +Cc: linux-kernel

On Sat, 05 Jan 2002 12:44:21 +0100
Klaus Zerwes <kzerwes@web.de> wrote:

> Stephan von Krawczynski wrote:
> > Tell us if it happens again with 2.4.17, or if you are sure it does not,
> > declare it as solved.
> > 
> > Regards,
> > Stephan
> > 
> 
> 
> I have copmpiles 2.4.16 and did some tests with a mirrored system ( 
> only the system, without the harddisks with data) using different 
> NICs: Davicom FE (dmfe), RT 8139C (8139too) and SMC 9432 EtherPower II 
>   83c172 (epic100).

Sorry, but why with 2.4.16? Is this a typo?

Regards,
Stephan


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: bug ?
  2001-12-31 18:51 ` Stephan von Krawczynski
@ 2002-01-05 11:44   ` Klaus Zerwes
  2002-01-05 15:37   ` Stephan von Krawczynski
  1 sibling, 0 replies; 12+ messages in thread
From: Klaus Zerwes @ 2002-01-05 11:44 UTC (permalink / raw)
  To: Stephan von Krawczynski; +Cc: linux-kernel

Stephan von Krawczynski wrote:

> On Mon, 31 Dec 2001 19:09:52 +0100
> Klaus Zerwes <kzerwes@web.de> wrote:
> 
> 
>>My PC hangs sporadicaly (every 2 weeks) after heavy Network traffic.
>>I tried to work around the problem by changing the NIC (dmfe > 
>>realtek, using new driver 8139too), but it din't help.
>>
> 
> Hm, I think I saw something the like. The configuration was basically SuSE 7.3
> (with 2.4.10-whatever kernel) and two Realtek cards in a not-trusted cheap box.
> I saw a good amount of collisions on the network, too. I replaced the Realteks
> with DLink and the kernel with 2.4.16 and it did not happen again, although the
> network collisions stayed the same. I tend to think it is the old kernel, but I
> don't like Realtek cards anyway, so I threw them out in one go.
> 
> Tell us if it happens again with 2.4.17, or if you are sure it does not,
> declare it as solved.
> 
> Regards,
> Stephan
> 


I have copmpiles 2.4.16 and did some tests with a mirrored system ( 
only the system, without the harddisks with data) using different 
NICs: Davicom FE (dmfe), RT 8139C (8139too) and SMC 9432 EtherPower II 
  83c172 (epic100).
The System did work fine (the Realtek-NIC I had a huge amount of 
collisions, but it did work!, with the SMC-NIC the Tx-speed was not 
hipeak, but it did work werry constant).
I testet nearly every protocol I can handle and created a realy hard 
networktraffic for a nearly a complete day and the system did not crash!!
Hopefully I was setting my configuration up, connected the 
data-harddisks and rebooted - id did not take 30 minutes and the 
system crashed again. My knowledge of systems is not the best, but for 
me this seems to be a hardwareproblem with the board. From a 
retrospektiv point of view: this box did work for nearly 3 years under 
Linux (suse, debian, slackware) and with FreeBSD and it worked fine - 
but only with one harddisk.
I know that this ALI-board is not the best, but I did not know it is 
realy so bad.

-- 
live free or die :: linux


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: bug ?
  2001-12-31 18:09 bug ? Klaus Zerwes
  2001-12-31 18:51 ` Stephan von Krawczynski
@ 2002-01-02 14:03 ` Simon Richter
  1 sibling, 0 replies; 12+ messages in thread
From: Simon Richter @ 2002-01-02 14:03 UTC (permalink / raw)
  To: Klaus Zerwes; +Cc: linux-kernel

On Mon, 31 Dec 2001, Klaus Zerwes wrote:

> My PC hangs sporadicaly (every 2 weeks) after heavy Network traffic.
> I tried to work around the problem by changing the NIC (dmfe >
> realtek, using new driver 8139too), but it din't help.

The RealTek 8139 is a bad choice, I had the same effect on one of our
servers until I replaced it with a NE2000. I think this is related to
busmaster DMA.

   Simon

-- 
GPG public key available from http://phobos.fs.tum.de/pgp/Simon.Richter.asc
 Fingerprint: DC26 EB8D 1F35 4F44 2934  7583 DBB6 F98D 9198 3292
Hi! I'm a .signature virus! Copy me into your ~/.signature to help me spread!


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: bug ?
  2001-12-31 18:09 bug ? Klaus Zerwes
@ 2001-12-31 18:51 ` Stephan von Krawczynski
  2002-01-05 11:44   ` Klaus Zerwes
  2002-01-05 15:37   ` Stephan von Krawczynski
  2002-01-02 14:03 ` Simon Richter
  1 sibling, 2 replies; 12+ messages in thread
From: Stephan von Krawczynski @ 2001-12-31 18:51 UTC (permalink / raw)
  To: Klaus Zerwes; +Cc: linux-kernel

On Mon, 31 Dec 2001 19:09:52 +0100
Klaus Zerwes <kzerwes@web.de> wrote:

> My PC hangs sporadicaly (every 2 weeks) after heavy Network traffic.
> I tried to work around the problem by changing the NIC (dmfe > 
> realtek, using new driver 8139too), but it din't help.

Hm, I think I saw something the like. The configuration was basically SuSE 7.3
(with 2.4.10-whatever kernel) and two Realtek cards in a not-trusted cheap box.
I saw a good amount of collisions on the network, too. I replaced the Realteks
with DLink and the kernel with 2.4.16 and it did not happen again, although the
network collisions stayed the same. I tend to think it is the old kernel, but I
don't like Realtek cards anyway, so I threw them out in one go.

Tell us if it happens again with 2.4.17, or if you are sure it does not,
declare it as solved.

Regards,
Stephan


^ permalink raw reply	[flat|nested] 12+ messages in thread

* bug ?
@ 2001-12-31 18:09 Klaus Zerwes
  2001-12-31 18:51 ` Stephan von Krawczynski
  2002-01-02 14:03 ` Simon Richter
  0 siblings, 2 replies; 12+ messages in thread
From: Klaus Zerwes @ 2001-12-31 18:09 UTC (permalink / raw)
  To: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 4150 bytes --]

First: my english is realy bad - sorry

My PC hangs sporadicaly (every 2 weeks) after heavy Network traffic.
I tried to work around the problem by changing the NIC (dmfe > 
realtek, using new driver 8139too), but it din't help.
Today i had the luck ( :-( ) that the syslog-console was activ, so 
that I could get the messages (otherwise the PC hangs completly, and 
its no more longer possible to change the console)
The PC akts as a small server.
Main running services:
Kernel-NFS
Samba 2.2.1
mysql
sshd: OpenSSH_2.9.9p2, SSH protocols 1.5/2.0, OpenSSL 0x0090602f
apache w/ php
ip-filter
squid
Hardware:
lspci -v says:
00:00.0 Host bridge: Acer Laboratories Inc. [ALi] M1541 (rev 04)
         Subsystem: Acer Laboratories Inc. [ALi] ALI M1541 Aladdin 
V/V+ AGP System Controller
         Flags: bus master, slow devsel, latency 32
         Memory at da000000 (32-bit, non-prefetchable) [size=16M]
         Capabilities: [b0] AGP version 1.0

00:01.0 PCI bridge: Acer Laboratories Inc. [ALi] M5243 (rev 04) 
(prog-if 00 [Normal decode])
         Flags: bus master, slow devsel, latency 32
         Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
         I/O behind bridge: 0000d000-0000dfff
         Memory behind bridge: d8000000-d9ffffff
         Prefetchable memory behind bridge: db000000-dbffffff

00:07.0 ISA bridge: Acer Laboratories Inc. [ALi] M1533 PCI to ISA 
Bridge [Aladdin IV] (rev c3)
         Flags: bus master, medium devsel, latency 0

00:0f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c1) 
(prog-if fa)
         Flags: bus master, medium devsel, latency 32, IRQ 5
         I/O ports at f000 [size=16]

00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 
(rev 10)
         Subsystem: Realtek Semiconductor Co., Ltd. RT8139
         Flags: bus master, medium devsel, latency 32, IRQ 10
         I/O ports at e000 [size=256]
         Memory at dd000000 (32-bit, non-prefetchable) [size=256]
         Expansion ROM at dc000000 [disabled] [size=64K]

00:14.0 Network controller: AVM Audiovisuelles MKTG & Computer System 
GmbH A1 ISDN [Fritz] (rev 02)
         Subsystem: AVM Audiovisuelles MKTG & Computer System GmbH 
FRITZ!Card ISDN Controller
         Flags: medium devsel, IRQ 11
         Memory at dd002000 (32-bit, non-prefetchable) [size=32]
         I/O ports at e400 [size=32]

01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 
AGP (rev 7a) (prog-if 00 [VGA])
         Subsystem: ATI Technologies Inc: Unknown device 0084
         Flags: bus master, stepping, medium devsel, latency 32, IRQ 11
         Memory at db000000 (32-bit, prefetchable) [size=16M]
         I/O ports at d000 [size=256]
         Memory at d9000000 (32-bit, non-prefetchable) [size=4K]
         Expansion ROM at <unassigned> [disabled] [size=128K]
         Capabilities: [5c] Power Management version 1



and now the errormessage:
invalid opperand: 0000
CPU: 0
EIP: 0010:[<c010a123>]
------ inserted
(the only simmilar entry in System.map:c010a120 t IRQ0x00_interrupt)
------ continue
EFLAGS: 00010046
eax: d4ac5428	ebx:00000014	ecx:00000054	edx:14c42814
esi: 0402d7c0	edi:26dd33a3	ebp:04040101    esp:c2f23fe8
ds 002b		es 002b		ss 0018
Process sshd (pid 1407, stackpage=c2f23000)
Stack: ffffff00 08078480 00000023
        00000206 bffff236 0000002b
Call Trace:

Code: ff ff eb d9 89 f6 8d bc 27 00 00 00 00 68 01 ff ff ff eb c9

teh error ocured while i was doing a backup via ssh & tar + gzip
( something like:
ssh 192.168.0.1 tar -cSp --numeric-owner -f - /xport/netdata | gzip> \ 
/var/backup/hdd4/filename.tgz)
but as I said simillar errors ocure not only while running ssh.
Same error i had with earlier Kernelversions (2.4.9, 2.4.8), thats wy 
i use a out-of-the-box-kernel of a Distribution (SuSE).
If this error seems to result out of a hardware error, a reply would 
be verry nice.

I send you the output of dmesg as a txtfile.
I'w downloaded today aktual Kernel and try it with 2.4.17.

Thank you all for doing such a good work on this nice OS.
I work since 3 years with Linux - and I enjoi it every day.

A happy new year from Berlin
Klaus

-- 
live free or die :: linux

[-- Attachment #2: dmesg.txt --]
[-- Type: text/plain, Size: 6337 bytes --]

Linux version 2.4.10-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Tue Sep 25 12:33:54 GMT 2001
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
 BIOS-e820: 0000000007ff0000 - 0000000007ff3000 (ACPI NVS)
 BIOS-e820: 0000000007ff3000 - 0000000008000000 (ACPI data)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
No local APIC present or hardware disabled
Kernel command line: auto BOOT_IMAGE=server ro root=302 BOOT_FILE=/boot/vmlinuz
Initializing CPU#0
Detected 501.141 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 999.42 BogoMIPS
Memory: 126416k/131008k available (1289k kernel code, 4204k reserved, 381k data, 124k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 008021bf 808029bf 00000000, vendor = 2
Enabling new style K6 write allocation for 127 Mb
CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
CPU: After vendor init, caps: 008021bf 808029bf 00000000 00000002
CPU:     After generic, caps: 008021bf 808029bf 00000000 00000002
CPU:             Common caps: 008021bf 808029bf 00000000 00000002
CPU: AMD-K6(tm) 3D processor stepping 0c
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: AMD K6
PCI: PCI BIOS revision 2.10 entry at 0xfb2a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router ALI [10b9/1533] at 00:07.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ALI15X3: IDE controller on PCI bus 00 dev 78
PCI: Assigned IRQ 5 for device 00:0f.0
ALI15X3: chipset revision 193
ALI15X3: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: QUANTUM BIGFOOT TS12.7A, ATA DISK drive
hdb: FX810S, ATAPI CD/DVD-ROM drive
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hdc: ST320423A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 25075008 sectors (12838 MB) w/418KiB Cache, CHS=1560/255/63, UDMA(33)
hdc: 40011300 sectors (20486 MB) w/512KiB Cache, CHS=39693/16/63, UDMA(33)
hdb: ATAPI 8X CD-ROM drive, 256kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
 hda: hda1 hda2 hda3
 hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 hdc6 >
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
ide-floppy driver 0.97.sv
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 124k freed
Adding Swap: 249944k swap-space (priority -1)
Adding Swap: 128480k swap-space (priority -2)
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem Rev: 1.114.6.14/1.94.6.7/1.140.6.8/1.85.6.6/1.21.6.1/1.5.6.3 loaded
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.41.6.4
HiSax: Layer2 Revision 2.25.6.3
HiSax: TeiMgr Revision 2.17.6.2
HiSax: Layer3 Revision 2.17.6.4
HiSax: LinkLayer Revision 2.51.6.5
HiSax: Approval certification valid
HiSax: Approved with ELSA Microlink PCI cards
HiSax: Approved with Eicon Technology Diva 2.01 PCI cards
HiSax: Approved with Sedlbauer Speedfax + cards
HiSax: Approved with HFC-S PCI A based cards
HiSax: Total 1 card defined
HiSax: Card 1 Protocol EDSS1 Id=HiSax (0)
HiSax: AVM PCI driver Rev. 1.22.6.5
PCI: Found IRQ 11 for device 00:14.0
AVM PCI: stat 0x20a
AVM PCI: Class A Rev 2
HiSax: AVM Fritz!PCI config irq:11 base:0xE400
AVM PCI: ISAC version (0): 2086/2186 V1.1
AVM Fritz PnP/PCI: IRQ 11 count 0
AVM Fritz PnP/PCI: IRQ 11 count 5
HiSax: DSS1 Rev. 2.30.6.1
HiSax: 2 channels added
HiSax: MAX_WAITING_CALLS added
HiSax: debugging flags card 1 set to 4
isdn: Verbose-Level is 3
ippp, open, slot: 0, minor: 0, state: 0000
ippp_ccp: allocated reset data structure c5427000
8139too Fast Ethernet driver 0.9.18a
PCI: Found IRQ 10 for device 00:10.0
eth0: RealTek RTL8139 Fast Ethernet at 0xc8849000, 00:50:fc:2e:bc:5c, IRQ 10
eth0:  Identified 8139 chip type 'RTL-8139C'
eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
ip_tables: (c)2000 Netfilter core team
ip_conntrack (1023 buckets, 8184 max)
eth0: no IPv6 routers present
OPEN: 192.168.1.99 -> 145.253.2.11 ICMP
ippp0: dialing 1 0192071...
isdn_net: ippp0 connected
nfsd: last server has exited
nfsd: unexporting all filesystems

^ permalink raw reply	[flat|nested] 12+ messages in thread

* bug??
@ 2001-12-08  0:31 wolvie_cobain
  0 siblings, 0 replies; 12+ messages in thread
From: wolvie_cobain @ 2001-12-08  0:31 UTC (permalink / raw)
  To: linux-kernel

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: TEXT/PLAIN; charset=X-UNKNOWN, Size: 1931 bytes --]

Helo ppl,

I havin trobles compiling the 2.5.1-pre5 and pre6 kernels
more especificaly with the intermezzo filesystem. I dosen't use it for
nothing but i like to test some filesystem in a while and found this error
when compiling the kernel

gcc -D__KERNEL__ -I/thingz/kernelz/linux/include -Wall -Wstrict-prototypes
-Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common
-pipe -mpreferred-stack-boundary=2 -march=k6    -c -o psdev.o psdev.c
psdev.c: In function `presto_psdev_ioctl':
psdev.c:269: `TCGETS' undeclared (first use in this function)
psdev.c:269: (Each undeclared identifier is reported only once
psdev.c:269: for each function it appears in.)
psdev.c:270: warning: unreachable code at beginning of switch statement
make[3]: *** [psdev.o] Error 1
make[3]: Leaving directory `/thingz/kernelz/linux/fs/intermezzo'
make[2]: *** [first_rule] Error 2
make[2]: Leaving directory `/thingz/kernelz/linux/fs/intermezzo'
make[1]: *** [_subdir_intermezzo] Error 2
make[1]: Leaving directory `/thingz/kernelz/linux/fs'
make: *** [_dir_fs] Error 2

i could proceed for this point disablin the intermezzo fylesystem
by the by i just want to tell somebody
if o knew how to fix it i would be happy to help but..
cya
Thomas "Wolvie" Andrade

ps: and sorry bout the english.. it's not my first language, i'm brasilian
=)

"Nós também podemos trazer as coisas de volta.Dizem q somos o sonho de uma
raça
carniceira e talvez seja verdade, mas se nós acreditarmos e sonharmos podemos
mudar o mundo. Nós podemos sonha-lo de novo"
"Sonho de mil gatos"
-------------------------------------------------------------------------------
                /"\
                \ /  CAMPANHA DA FITA ASCII - CONTRA MAIL HTML
                 X   ASCII RIBBON CAMPAIGN - AGAINST HTML MAIL
                / \
-------------------------------------------------------------------------------
				linux user #106516
				ICQ 	   #46105730


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: Bug?
  2001-12-07 10:33 Bug? Ian Molton
@ 2001-12-07 10:56 ` DevilKin
  0 siblings, 0 replies; 12+ messages in thread
From: DevilKin @ 2001-12-07 10:56 UTC (permalink / raw)
  To: spyro; +Cc: linux-kernel

At 10:33 7/12/2001 +0000, you wrote:
>Hi.
>
>Havent had time to investigate, but I have seen a locup on the ASUS A7M
>mobo, with a via-rhine (100Mb/se, fdx) ethernet card.
>
>With the ethernet card in one PCI slot, the USB (95% of the time) will
>freeze the system solid when usb-uhci.o is loaded.
>
>Since moving the card to another slot, it seems to works fine.
>
>if anyone suggests 'things to look for' I will have a look (but it isnt my
>box, so it may take time).
>
>For reference, I have a (similar) box with the same CPU and mobo, but
>different cards, and have never seen this (or any similar) lockup.
>
>the mobo in the machine in question has been replaced, and the replacement
>shows the same problem.

I suppose that the USB hub on the mainboard and the PCI slot share IRQ's... 
and I've noticed that USB ain't too happy about sharing IRQ's.

Check the manual of the motherboard about this... or do an lspci -v and 
report the irq numbers.

DK


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Bug?
@ 2001-12-07 10:33 Ian Molton
  2001-12-07 10:56 ` Bug? DevilKin
  0 siblings, 1 reply; 12+ messages in thread
From: Ian Molton @ 2001-12-07 10:33 UTC (permalink / raw)
  To: linux-kernel

Hi.

Havent had time to investigate, but I have seen a locup on the ASUS A7M
mobo, with a via-rhine (100Mb/se, fdx) ethernet card.

With the ethernet card in one PCI slot, the USB (95% of the time) will
freeze the system solid when usb-uhci.o is loaded.

Since moving the card to another slot, it seems to works fine.

if anyone suggests 'things to look for' I will have a look (but it isnt my
box, so it may take time).

For reference, I have a (similar) box with the same CPU and mobo, but
different cards, and have never seen this (or any similar) lockup.

the mobo in the machine in question has been replaced, and the replacement
shows the same problem.

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2007-04-01 13:54 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-04-01 13:39 Bug? Sascha Curth
2007-04-01 13:54 ` Bug? Michal Piotrowski
  -- strict thread matches above, loose matches on Subject: below --
2002-05-21  9:48 BUG? alex-n
2002-05-21 10:14 ` BUG? Wilfried Weissmann
2001-12-31 18:09 bug ? Klaus Zerwes
2001-12-31 18:51 ` Stephan von Krawczynski
2002-01-05 11:44   ` Klaus Zerwes
2002-01-05 15:37   ` Stephan von Krawczynski
2002-01-02 14:03 ` Simon Richter
2001-12-08  0:31 bug?? wolvie_cobain
2001-12-07 10:33 Bug? Ian Molton
2001-12-07 10:56 ` Bug? DevilKin

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).